Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A novel biomimetic nanoplasmonic sensor for rapid and accurate evaluation of checkpoint inhibitor immunotherapy

  • Batool, Razia|||0000-0001-6864-5655
  • Soler Aznar, Maria|||0000-0001-7232-2277
  • Singh, Rukmani|||0000-0002-7562-7217
  • Lechuga, Laura M.|||0000-0001-5187-5358
Immune checkpoint inhibitors (ICIs) emerged as promising immunotherapies for cancer treatment, harnessing the patient's immune system to fight and eliminate tumor cells. However, despite their potential and proven efficacies, checkpoint inhibitors still face important challenges such as the tumor heterogeneity and resistance mechanisms, and the complex in vitro testing, which limits their widespread applicability and implementation to treat cancer. To address these challenges, we propose a novel analytical technique utilizing biomimetic label-free nanoplasmonic biosensors for rapid and reliable screening and evaluation of checkpoint inhibitors. We have designed and fabricated a low-density nanostructured plasmonic sensor based on gold nanodisks that enables the direct formation of a functional supported lipid bilayer, which acts as an artificial cell membrane for tumor ligand immobilization. With this biomimetic scaffold, our biosensing approach provides real-time, highly sensitive analysis of immune checkpoint pathways and direct assessment of the blocking effects of monoclonal antibodies in less than 20 min/test. We demonstrate the accuracy of our biomimetic sensor for the study of the programmed cell death protein 1 (PD1) checkpoint pathway, achieving a limit of detection of 6.7 ng/mL for direct PD1/PD-L1 interaction monitoring. Besides, we have performed dose-response inhibition curves for an anti-PD1 monoclonal antibody, obtaining a half maximal inhibitory concentration (IC) of 0.43 nM, within the same range than those obtained with conventional techniques. Our biomimetic sensor platform combines the potential of plasmonic technologies for rapid label-free analysis with the reliability of cell-based assay in terms of ligand mobility. The biosensor is integrated in a compact user-friendly device for the straightforward implementation in biomedical and pharmaceutical laboratories. Graphical Abstract: (Figure presented.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Room-Temperature Silicon Platform for GHz-Frequency Nanoelectro-Opto-Mechanical Systems

  • Navarro-Urrios, Daniel
  • Colombano, Martín F.
  • Arregui, Guillermo
  • Madiot, Guilhem
  • Pitanti, Alessandro
  • Makkonen, Tapani
  • Ahopelto, Jouni
  • Sotomayor-Torres, Clivia
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Nanoelectro-opto-mechanical systems enable the synergistic coexistence of electrical, mechanical, and optical signals on a chip to realize new functions. Most of the technology platforms proposed for the fabrication of these systems so far are not fully compatible with the mainstream CMOS technology, thus, hindering the mass-scale utilization. We have developed a CMOS technology platform for nanoelectro-optomechanical systems that includes piezoelectric interdigitated transducers for electronic driving of mechanical signals and nanocrystalline silicon nanobeams for an enhanced optomechanical interaction. Room-temperature operation of devices at 2 GHz and with peak sensitivity down to 2.6 cavity phonons is demonstrated. Our proof-of-principle technology platform can be integrated and interfaced with silicon photonics, electronics, and MEMS devices and may enable multiple functions for coherent signal processing in the classical and quantum domains., This research has received funding from the European Union H2020 FET Open Project PHENOMEN (No. 713450). TheICN2 authors acknowledge support by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-20190706), the MCIN project SIP (PGC2018-101743-B-100), and by the CERCA Programme Generalitat de Catalunya. G.A. was supported by a BIST and MFC by a S. Ochoa Project Ph.D. studentships. G. M. acknowledges support from the EU ERC project LEIT (GA Nr. 885689). A.M. acknowledges support from MCIN/AEI/10.13039/501100011033/(Projects PGC2018-094490-BC21 and ICTS-2017-28-UPV-9), from Generalitat Valenciana (BEST/2020/178, PROMETEO/2019/123, and IDIFEDER/2021/061) and from "Unio ' n Europea NextGenerationEU/PRTR".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantifying the robustness of topological slow light

  • Arregui, Guillermo
  • Gomis-Bresco, J.
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
The backscattering mean free path ξ, the average ballistic propagation length along a waveguide, quantifies the resistance of slow light against unwanted imperfections in the critical dimensions of the nanostructure. This figure of merit determines the crossover between acceptable slow-light transmission affected by minimal scattering losses and a strong backscattering-induced destructive interference when the waveguide length L exceeds ξ. Here, we calculate the backscattering mean free path for a topological photonic waveguide for a specific and determined amount of disorder and, equally relevant, for a fixed value of the group index ng which is the slowdown factor of the group velocity with respect to the speed of light in vacuum. These two figures of merit, ξ and ng, should be taken into account when quantifying the robustness of topological and conventional (nontopological) slow-light transport at the nanoscale. Otherwise, any claim on a better performance of topological guided light over a conventional one is not justified., This work was supported by the European Commission H2020 FET Proactive project TOCHA (No. 824140). The authors acknowledge funding by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2019-0706) and the Plan Nacional RTI2018-093921-A-C44 (SMOOTH) and CERCA Programme/Generalitat de Catalunya. G. A. was supported by a H2020 MSC cofund action, a BIST Ph.D. fellowship, and P. D. G. by a Ramon y Cajal Fellowship No. RyC-2015-18124., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering nanoscale hypersonic phonon transport

  • Florez, Omar
  • Arregui, Guillermo
  • Albrechtsen, Marcus
  • Ng, Ryan C.
  • Gomis-Bresco, J.
  • Stobbe, Søren
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
Controlling vibrations in solids is crucial to tailor their elastic properties and interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, that is, a frequency range over which there are no available elastic waves. Here we demonstrate the complete absence of thermal vibrations in a nanostructured silicon membrane at room temperature over a broad spectral window, with a 5.3-GHz-wide bandgap centred at 8.4 GHz. By constructing a line-defect waveguide, we directly measure gigahertz guided modes without any external excitation using Brillouin light scattering spectroscopy. Our experimental results show that the shamrock crystal geometry can be used as an efficient platform for phonon manipulation with possible applications in optomechanics and signal processing transduction., This project has received funding from the European Union’s H2020 FET Proactive project TOCHA (No. 824140) and Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement (No. 754558). The ICN2 authors acknowledge funding from the Severo Ochoa programme from Spanish MINECO (No. SEV-2019-0706), Plan Nacional (RTI2018-093921-A-C44 - SMOOTH) and MCIN project SIP (PGC2018-101743-B-100), as well as by the CERCA Programme Generalitat de Catalunya. O.F. and G.A. are supported by BIST PhD Fellowships, R.C.N. by a Marie Sklodowska-Curie fellowship (No. 897148) and P.D.G. by a Ramon y Cajal fellowship (No. RyC-2015-18124). M.A. and S.S. gratefully acknowledge funding from the Villum Foundation Young Investigator Programme (No. 13170), the Danish National Research Foundation (No. DNRF147 – NanoPhoton), Innovation Fund Denmark (No. 0175-00022 – NEXUS) and Independent Research Fund Denmark (No. 0135-00315 – VAFL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A novel biomimetic nanoplasmonic sensor for rapid and accurate evaluation of checkpoint inhibitor immunotherapy

  • Batool, Razia
  • Soler, María
  • Singh, Rukmani
  • Lechuga, Laura M.
Immune checkpoint inhibitors (ICIs) emerged as promising immunotherapies for cancer treatment, harnessing the patient's immune system to fight and eliminate tumor cells. However, despite their potential and proven efficacies, checkpoint inhibitors still face important challenges such as the tumor heterogeneity and resistance mechanisms, and the complex in vitro testing, which limits their widespread applicability and implementation to treat cancer. To address these challenges, we propose a novel analytical technique utilizing biomimetic label-free nanoplasmonic biosensors for rapid and reliable screening and evaluation of checkpoint inhibitors. We have designed and fabricated a low-density nanostructured plasmonic sensor based on gold nanodisks that enables the direct formation of a functional supported lipid bilayer, which acts as an artificial cell membrane for tumor ligand immobilization. With this biomimetic scaffold, our biosensing approach provides real-time, highly sensitive analysis of immune checkpoint pathways and direct assessment of the blocking effects of monoclonal antibodies in less than 20 min/test. We demonstrate the accuracy of our biomimetic sensor for the study of the programmed cell death protein 1 (PD1) checkpoint pathway, achieving a limit of detection of 6.7 ng/mL for direct PD1/PD-L1 interaction monitoring. Besides, we have performed dose-response inhibition curves for an anti-PD1 monoclonal antibody, obtaining a half maximal inhibitory concentration (IC50) of 0.43 nM, within the same range than those obtained with conventional techniques. Our biomimetic sensor platform combines the potential of plasmonic technologies for rapid label-free analysis with the reliability of cell-based assay in terms of ligand mobility. The biosensor is integrated in a compact user-friendly device for the straightforward implementation in biomedical and pharmaceutical laboratories., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research work has been mainly funded by the DANCE project, part of the Severo Ochoa—Women Talent Program (SO-WTP) of the Catalan Institute of Nanoscience and Nanotechnology (ICN2). RB received economic support (Ref. PRE2019-089357) from MCIN and AEI linked to the project SEV-2019–0706-19–4. MS received economic support from the Ramon y Cajal Grant (RYC2020-029015-I) funded by the AEI/MCIN and the European Union NextGenerationEU/PRTR. The ICN2 is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. ICN2 is funded by the CERCA programme (Generalitat de Catalunya). The NanoB2A group is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament de Recerca i Universitats de la Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Room-temperature silicon platform for GHz-frequency nanoelectro-opto-mechanical systems

  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Colombano Sosa, Martin|||0000-0002-2003-8597
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Madiot, Guilhem|||0000-0003-2662-4324
  • Pitanti, Alessandro|||0000-0002-7027-0300
  • Griol, Amadeu|||0000-0002-5428-5713
  • Makkonen, Tapani
  • Ahopelto, Jouni|||0000-0003-3372-6097
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Martínez, Alejandro|||0000-0001-5448-0140
Nanoelectro-opto-mechanical systems enable the synergistic coexistence of electrical, mechanical, and optical signals on a chip to realize new functions. Most of the technology platforms proposed for the fabrication of these systems so far are not fully compatible with the mainstream CMOS technology, thus, hindering the mass-scale utilization. We have developed a CMOS technology platform for nanoelectro-opto-mechanical systems that includes piezoelectric interdigitated transducers for electronic driving of mechanical signals and nanocrystalline silicon nanobeams for an enhanced optomechanical interaction. Room-Temperature operation of devices at 2 GHz and with peak sensitivity down to 2.6 cavity phonons is demonstrated. Our proof-of-principle technology platform can be integrated and interfaced with silicon photonics, electronics, and MEMS devices and may enable multiple functions for coherent signal processing in the classical and quantum domains.