Skip to main content

AVANZANDO EN CAVIDADES OPTOMECANICAS DE SILICO A TEMPERATURA AMBIENTE

PGC2018-094490-B-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Floquet Phonon Lasing in Multimode Optomechanical Systems

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pelka, Karl
  • Burgwal, Roel
  • Xuereb, André
  • Verhagen, Ewold
[EN] Dynamical radiation pressure effects in cavity optomechanical systems give rise to self-sustained oscillations or 'phonon lasing' behavior, producing stable oscillators up to GHz frequencies in nanoscale devices. Like in photonic lasers, phonon lasing normally occurs in a single mechanical mode. We show here that mode-locked, multimode phonon lasing can be established in a multimode optomechanical system through Floquet dynamics induced by a temporally modulated laser drive. We demonstrate this concept in a suitably engineered silicon photonic nanocavity coupled to multiple GHz-frequency mechanical modes. We find that the long-term frequency stability is significantly improved in the multimode lasing state as a result of the mode locking. These results provide a path toward highly stable ultracompact oscillators, pulsed phonon lasing, coherent waveform synthesis, and emergent many-mode phenomena in oscillator arrays., The authors thank Javier del Pino for useful discussions. This work is supported by the European Union's Horizon 2020 research and innovation program under Grant Agreements No. 732894 (FET Proactive HOT), 713450 (FET-Open PHENOMEN), and 945915 (SIOMO), the Spanish State Research Agency (PGC2018-094490-BC21) and by the Juilan Schwinger Foundation project grant No. JSF-16-03-0000 (TOM). It is part of the research program of the Netherlands Organisation for Scientific Research (NWO). A. M. acknowledges funding from Generalitat Valenciana under Grants No. PROMETEO/2019/123, BEST/2020/178, and IDIFEDER/2018/033. E. V. acknowledges support from the European Research Council (ERC Starting Grant No. 759644-TOPP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave oscillator and frequency comb in a silicon optomechanical cavity with a full phononic bandgap

  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Martín, Leopoldo L.
  • Navarro-Urrios, Daniel
[EN] Cavity optomechanics has recently emerged as a new paradigm enabling the manipulation of mechanical motion via optical fields tightly confined in deformable cavities. When driving an optomechanical (OM) crystal cavity with a laser blue-detuned with respect to the optical resonance, the mechanical motion is amplified, ultimately resulting in phonon lasing at MHz and even GHz frequencies. In this work, we show that a silicon OM crystal cavity performs as an OM microwave oscillator when pumped above the threshold for self-sustained OM oscillations. To this end, we use an OM cavity designed to have a breathing-like mechanical mode at 3.897 GHz in a full phononic bandgap. Our measurements show that the first harmonic of the detected signal displays a phase noise of ¿¿100 dBc/Hz at 100 kHz. Stronger blue-detuned driving leads eventually to the formation of an OM frequency comb, whose lines are spaced by the mechanical frequency. We also measure the phase noise for higher-order harmonics and show that, unlike in Brillouin oscillators, the noise is increased as corresponding to classical harmonic mixing. Finally, we present real-time measurements of the comb waveform and show that it can be fitted to a theoretical model recently presented. Our results suggest that silicon OM cavities could be relevant processing elements in microwave photonics and optical RF processing, in particular in disciplines requiring low weight, compactness and fiber interconnection., This work was supported by the European Commission (PHENOMEN H2020-EU-713450); Programa de Ayudas de Investigacion y Desarrolo (PAID-01-16) de la Universitat Politecnica de Valencia; Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (PROMETEO/2019/123, PPC/2018/002, IDIFEDER/2018/033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optomechanical microwave oscillators

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical interaction in optical dielectric cavities can be used to generate high-purity microwave tones, giving rise to optomechanical microwave oscillators. Here, we introduce the main properties of these devices, which can be implemented in photonic integrated chips, and envisage its deployment in the mid-term in microwave photonics applications., This work was supported by the European Commission (PHENOMEN H2020-EU-713450; SIOMO H2020-EU-945915); Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (BEST/ 2020/178, PROMETEO/2019/123, PPC/2018/002, IDIFEDER/ 2018/033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Testing Optomechanical Microwave Oscillators for SATCOM Application

  • Mercadé, Laura|||0000-0002-4994-7727
  • Ruiz-Garnica, Jesús|||0000-0002-2361-2806
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Rico, Eloy
  • Gómez, Juan Carlos
  • Piqueras, Miguel A.
  • Duarte, Vanessa C.
[EN] The realization of photonic microwave oscillators using optomechanical cavities has recently become a reality. By pumping the cavity with a blue-detuned laser, the so-called phonon lasing regime - in which a mechanical resonance is amplified beyond losses - can be reached and the input signal gets modulated by highly-coherent tones at integer multiples of the mechanical resonance. Implementing optomechanical cavities on released films with high index of refraction can lead to optical modes at telecom wavelengths and mechanical resonances in the GHz scale, resulting in highly-stable signals in the microwave domain upon photodetection. Owing to the extreme compactness of such cavities, application in satellite communications (SATCOM) seems highly appropriate, but no experiments have been reported so far. In this paper, an optomechanical microwave oscillator (OMO) built on a micron-scale silicon optomechanical crystal cavity is characterized and tested in a real SATCOM testbed. Using a blue-detuned laser, the OMO is driven into a phonon lasing state where multiple harmonics are generated, reaching tones up to 20 GHz. Under this regime, its practical applicability, remarkably addressing its performance as a photonic local oscillator, has been validated. The results, in addition with the advantages of extreme compactness and silicon-technology compatibility, make OMOs very promising candidates to build ultra-low weight photonics-based microwave oscillators for SATCOM applications., This work was supported in part by the H2020 Future and Emerging Technologies program under Grant PHENOMEN 713450, SIOMO 945915, and OPTIMA 730149, in part by the Spanish State Research Agency underGrants PGC2018-094490-BC21 and ICTS-2017-28-UPV-9, and in part by Generalitat Valenciana under Grants BEST/2020/178, PROMETEO/2019/123, IDIFEDER/2020/041, and IDIFEDER/2021/061.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Injection locking in an optomechanical coherent phonon source

  • Arregui, Guillermo
  • Colombano, Martín F.
  • Maire, Jeremie
  • Pitanti, Alessandro
  • Capuj, Néstor E.
  • Sotomayor-Torres, Clivia M.
  • Navarro-Urrios, Daniel
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Spontaneous locking of the phase of a coherent phonon source to an external reference is demonstrated in a deeply sideband-unresolved optomechanical system. The high-amplitude mechanical oscillations are driven by the anharmonic modulation of the radiation pressure force that result from an absorption-mediated free-carrier/temperature limit cycle, i.e., self-pulsing. Synchronization is observed when the pump laser driving the mechanical oscillator to a self-sustained state is modulated by a radiofrequency tone. We employ a pump-probe phonon detection scheme based on an independent optical cavity to observe only the mechanical oscillator dynamics. The lock range of the oscillation frequency, i.e., the Arnold tongue, is experimentally determined over a range of external reference strengths, evidencing the possibility to tune the oscillator frequency for a range up to 350 kHz. The stability of the coherent phonon source is evaluated via its phase noise, with a maximum achieved suppression of 44 dBc/Hz at 1 kHz offset for a 100 MHz mechanical resonator. Introducing a weak modulation in the excitation laser reveals as a further knob to trigger, control and stabilize the dynamical solutions of self-pulsing based optomechanical oscillators, thus enhancing their potential as acoustic wave sources in a single-layer silicon platform., This research was funded by EU FET Open project PHENOMEN (GA: 713450). ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. G. A. and C. M. S.-T. acknowledge the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). D. N. U., G. A. and M. F. C. gratefully acknowledge the support of a Ramon y Cajal postdoctoral fellowship (RYC-2014-15392), a BIST studentship, and a Severo Ochoa studentship, respectively. D. N. U. acknowledges the funding through the Ministry of Science, Innovation and Universities (PGC2018-094490-B-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Room-Temperature Silicon Platform for GHz-Frequency Nanoelectro-Opto-Mechanical Systems

  • Navarro-Urrios, Daniel
  • Colombano, Martín F.
  • Arregui, Guillermo
  • Madiot, Guilhem
  • Pitanti, Alessandro
  • Makkonen, Tapani
  • Ahopelto, Jouni
  • Sotomayor-Torres, Clivia
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Nanoelectro-opto-mechanical systems enable the synergistic coexistence of electrical, mechanical, and optical signals on a chip to realize new functions. Most of the technology platforms proposed for the fabrication of these systems so far are not fully compatible with the mainstream CMOS technology, thus, hindering the mass-scale utilization. We have developed a CMOS technology platform for nanoelectro-optomechanical systems that includes piezoelectric interdigitated transducers for electronic driving of mechanical signals and nanocrystalline silicon nanobeams for an enhanced optomechanical interaction. Room-temperature operation of devices at 2 GHz and with peak sensitivity down to 2.6 cavity phonons is demonstrated. Our proof-of-principle technology platform can be integrated and interfaced with silicon photonics, electronics, and MEMS devices and may enable multiple functions for coherent signal processing in the classical and quantum domains., This research has received funding from the European Union H2020 FET Open Project PHENOMEN (No. 713450). TheICN2 authors acknowledge support by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-20190706), the MCIN project SIP (PGC2018-101743-B-100), and by the CERCA Programme Generalitat de Catalunya. G.A. was supported by a BIST and MFC by a S. Ochoa Project Ph.D. studentships. G. M. acknowledges support from the EU ERC project LEIT (GA Nr. 885689). A.M. acknowledges support from MCIN/AEI/10.13039/501100011033/(Projects PGC2018-094490-BC21 and ICTS-2017-28-UPV-9), from Generalitat Valenciana (BEST/2020/178, PROMETEO/2019/123, and IDIFEDER/2021/061) and from "Unio ' n Europea NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Radiationless anapole states in on-chip photonics

  • Díaz-Escobar, Evelyn
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Bauer, Thomas
  • Barreda, Ángela I.
  • Kuipers, K.
[EN] High-index nanoparticles are known to support radiationless states called anapoles, where dipolar and toroidal moments interfere to inhibit scattering to the far field. In order to exploit the striking properties arising from these interference conditions in photonic integrated circuits, the particles must be driven in-plane via integrated waveguides. Here, we address the excitation of electric anapole states in silicon disks when excited on-chip at telecom wavelengths. In contrast to normal illumination, we find that the anapole condition¿identified by a strong reduction of the scattering¿does not overlap with the near-field energy maximum, an observation attributed to retardation effects. We experimentally verify the two distinct spectral regions in individual disks illuminated in-plane from closely placed waveguide terminations via far-field and near-field measurements. Our finding has important consequences concerning the use of anapole states and interference effects of other Mie-type resonances in high-index nanoparticles for building complex photonic integrated circuitry., E.D.E. acknowledges funding from Generalitat Valenciana under grant GRISOLIAP/2018/164. A.I.B. acknowledges financial support by the Alexander von Humboldt Foundation. T.B. and L.K. acknowledge support from the European Research Council (ERC) Advanced Investigator Grant no. 340438-CONSTANS. E.P.-C. gratefully acknowledges support from the Spanish Ministry of Science and Innovation under grant FJCI-2015-27228 and postdoctoral research stay grant CAS19/00349. A.M. thanks funding from Generalitat Valenciana (Grants No. PROMETEO/2019/123, BEST/2020/178 and IDIFEDER/2018/033) and Spanish Ministry of Science, Innovation and Universities (Grants No. PRX18/00126 and PGC2018-094490-BC22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optomechanical Modulation Spectroscopy of Bound States in the Continuum in a Dielectric Metasurface

  • Zanotto, S.
  • Conte, G.
  • Navarro-Urrios, Daniel
  • Tredicucci, A.
  • Pitanti, A.
  • Bellieres, Laurent Christophe
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Elusive features in photonic and electronic devices can be detected by means of advanced, time-domain spectroscopic techniques. In this paper we introduce a modulation spectroscopy based on the optomechanical interaction of photonic and mechanical modes. Applying the technique to a Si metasurface and its drumlike mechanical modes, we detect narrow-band quasi-bound-state-in-the-continuum (quasi-BIC) modes close to normal incidence, where their measurement can be hindered by a high-symmetry protection and undesired background modes. Showing a visibility enhancement of more than one order of magnitude, the optomechanical modulation spectroscopy can be an innovative tool for precise spectroscopy of a wide set of photonic devices, including the goal of measuring purely symmetry protected BIC resonances., A.M. acknowledges funding from Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B-C21, PRX18/00126) and Generalitat Valenciana (PROMETEO/2019/123, IDIFEDER/2021/061).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vertical Engineering for Large Brillouin Gain in Unreleased Silicon-Based Waveguides

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Korovin, Alexander V.
  • Pennec, Yan
  • Ahopelto, Jouni
  • Djafari-Rouhani, Bahram
[EN] Strong acousto-optic interaction in high-index waveguides and cavities generally requires the releasing of the high-index core to avoid mechanical leakage into the underlying low-index substrate. This complicates fabrication, limits thermalization, reduces the mechanical robustness, and hinders large-area optomechanical devices on a single chip. Here, we overcome this limitation by employing vertical photonic-phononic engineering to drastically reduce mechanical leakage into the cladding by adding a pedestal with specific properties between the core and the cladding. We apply this concept to a silicon-based platform, due to the remarkable properties of silicon to enhance optomechanical interactions and the technological relevance of silicon devices in multiple applications. Specifically, the insertion of a thick silicon nitride layer between the silicon guiding core and the silica substrate contributes to reducing gigahertz-frequency phonon leakage while enabling large values of the Brillouin gain in an unreleased platform. We numerically obtain values of the Brillouin gain around 300 ( W m ) ¿ 1 for different configurations, which could be further increased by operation at cryogenic temperatures. These values should enable Brillouin-related phenomena in centimeter-scale waveguides or in more compact ring resonators. Our findings could pave the way toward large-area unreleased-cavity and waveguide optomechanics on silicon and other high-index photonic technologies., This work was supported by the European Commission (PHENOMEN Grant No. H2020-EU-713450), the Universitat Politecnica de Valencia (Grant No. PAID-01-169), the Ministerio de Ciencia, Innovacion y Universidades (Grants No. PGC2018-094490-B and No. PRX18/00126), and the Generalitat Valenciana (Grant No. PROMETEO/2019/123)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Exotic nanophotonics with subwavelength high-index disks

  • Díaz-Escobar, Evelyn
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Barreda, Ángela I.
[EN] High-index dielectric disks with subwavelength dimensions seem relatively simple electromagnetic structures. However, they can give rise to exotic phenomena in nanophotonics. Here we show recent findings that show that high-index disks can be used to manipulate light in subwavelength dimensions as a result of Mie and Fabry-Perot resonances. We also propose that such disks can be used for new applications in photonic integrated circuits (PICs) using silicon technology., A. M. acknowledges funding from Generalitat Valenciana (BEST/2020/178, IDIFEDER/2018/033, PPC/2018/002, PROMETEO/2019/123, IDIFEDER/2020/041); Ministerio de Ciencia e Innovación (PGC2018-094490-B-C21, ICTS-2017- 28-UPV-9); European Commission, H2020 Future and Emerging Technologies (713450, 829067).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced excitation and readout of plasmonic cavity modes in NPoM via SiN waveguides for on-chip SERS

  • Vázquez-Lozano, J. Enrique
  • Baumberg, Jeremy J.
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Metallic nanoparticle-on-a-mirror (NPoM) cavities enable extreme field confinement in sub-nm gaps, leading to unrivaled performance for nonlinear processes such as surface-enhanced Raman scattering (SERS). So far, prevailing experimental approaches based on NPoMs have been performed by means of free-space light excitation and collection under oblique incidence, since the fundamental radiatively-coupled NPoM mode does not scatter in the normal direction. Retaining this working principle, here we numerically show that plasmonic cavity modes in NPoM configurations can be efficiently excited in an integrated SERS approach through TM guided modes of silicon nitride (SiN) waveguides. Intensity enhancements beyond 10(5) can be achieved for gap spacings around 1 nm. So as to reduce unwanted SiN Raman background, the output Stokes signals are transferred to transversely placed waveguides, reaching coupling efficiencies of up to 10%. Geometrical parameters such as the gap thickness as well as the radius and position of the nanoparticle provide full control over the main spectral features, thereby enabling us to engineer and drive the optical response of NPoMs for high-performance SERS in Si-based photonic integrated platforms., H2020 European Research Council (THOR-H2020-EU-829067); Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B-C21); Generalitat Valenciana (PROMETEO/2019/123).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Properties of nanocrystalline silicon probed by optomechanics

  • Navarro-Urrios, Daniel
  • Colombano, Martín F.
  • Maire, Jeremie
  • Chávez-Ángel, Emigdio
  • Arregui, Guillermo
  • Capuj, Néstor E.
  • Devos, Arnaud
  • Grigoras, Kestutis
  • Häkkinen, Teija
  • Saarilahti, Jaakko
  • Makkonen, Tapani
  • Sotomayor-Torres, Clivia M.
  • Ahopelto, Jouni
  • Griol Barres, Amadeu
  • Bellieres, Laurent Christophe
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Nanocrystalline materials exhibit properties that can differ substantially from those of their single crystal counterparts. As such, they provide ways to enhance and optimize their functionality for devices and applications. Here, we report on the optical, mechanical and thermal properties of nanocrystalline silicon probed by means of optomechanical nanobeams to extract information of the dynamics of optical absorption, mechanical losses, heat generation and dissipation. The optomechanical nanobeams are fabricated using nanocrystalline films prepared by annealing amorphous silicon layers at different temperatures. The resulting crystallite sizes and the stress in the films can be controlled by the annealing temperature and time and, consequently, the properties of the films can be tuned relatively freely, as demonstrated here by means of electron microscopy and Raman scattering. We show that the nanocrystallite size and the volume fraction of the grain boundaries play a key role in the dissipation rates through nonlinear optical and thermal processes. Promising optical (13,000) and mechanical (1700) quality factors were found in the optomechanical cavity realized in the nanocrystalline Si resulting from annealing at 950 degrees C. The enhanced absorption and recombination rates via the intragap states and the reduced thermal conductivity boost the potential to exploit these nonlinear effects in applications including Nanoelectromechanical systems (NEMS), phonon lasing and chaos-based devices., The following support is gratefully acknowledged: the European Commission project PHENOMEN (H2020-EU-FET Open GA no. 713450), the Spanish Severo Ochoa Excellence program (SEV-2017-0706), CMST and ECA: the Spanish MICINN project SIP (PGC2018-101743-B-I00), DNU and AM: the Spanish MICINN project PGC2018-094490-B-C22. DNU holds a Ramon y Cajal postdoctoral fellowship (RYC-2014-15392); MFC and GA hold a S. Ochoa and a M. S. Curie COFUND BIST postgraduate studentship, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multimode Phonon Lasing via Self-Induced Optical Coherent Pumping

  • Alonso Tomás, David
  • Capuj, Nestor E.
  • Navarro Urrios, Daniel
  • Mas-Arabi, Carlos|||0000-0001-5564-5365
  • Milián Enrique, Carles|||0000-0001-8492-366X
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Multimode phonon lasing in cavity optomechanical systems enables the generation of coherent, multi-frequency mechanical signals with potential applications in RF signal processing, frequency combs, and sensing. However, achieving simultaneous self-sustained oscillations in multiple mechanical modes is often hindered by strong mode competition. Here, we demonstrate robust multimode phonon lasing in a silicon optomechanical nanobeam, driven by a self-pulsing (SP) mechanism originating from free-carrier dispersion and thermo-optic effects. Unlike previous approaches that rely on external pump modulation or the use of widely spectrally separated modes to mitigate the suppression of self-oscillations, our system supports lasing of two strongly competing in-plane flexural modes of the nanobeam under continuous-wave pumping. The SP cycle dynamically adapts to the mechanical perturbations, providing synchronized optical pumping even in the absence of harmonic frequency relations. This results in stable multimode operation across periodic, quasi-periodic, and chaotic regimes, all accurately predicted by numerical modeling. These findings establish SP as a passive and self-organized mechanism for coherent multi-frequency phonon generation in chip-scale platforms., This work was supported by the MCINN through the projects ALLEGRO (Grants No. PID2021-124618NB-C22 and PID2021-124618NB-C21), MOCCASIN-2D (Grant No. TED2021-132040B-C21), and an FPU fellowship (Grant No. FPU23/00690) awarded to D.A.T.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid photonic-plasmonic cavities based on the nanoparticle-on-a-mirror configuration

  • Barreda, Ángela I.
  • Zapata-Herrera, Mario
  • Palstra, Isabelle M.
  • Aizpurua, Javier
  • Koenderink, A. Femius
  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Hybrid photonic-plasmonic cavities have emerged as a new platform to increase light-matter interaction capable to enhance the Purcell factor in a singular way not attainable with either photonic or plasmonic cavities separately. In the hybrid cavities proposed so far, the plasmonic element is usually a metallic bow-tie antenna, so the plasmonic gap-defined by lithography-is limited to minimum values of several nanometers. Nanoparticle-on-a-mirror (NPoM) cavities are far superior to achieve the smallest possible mode volumes, as plasmonic gaps smaller than 1 nm can be created. Here, we design a hybrid cavity that combines an NPoM plasmonic cavity and a dielectric-nanobeam photonic crystal cavity operating at transverse-magnetic polarization. The metallic nanoparticle can be placed very close (<1 nm) to the upper surface of the dielectric cavity, which acts as a low-reflectivity mirror. We demonstrate through numerical calculations of the local density of states that this hybrid plasmonic-photonic cavity exhibits quality factors Q above 10(3) and normalized mode volumes V down to 10(-3), thus resulting in high Purcell factors (F-P approximate to 10(5)), while being experimentally feasible with current technology. Our results suggest that hybrid cavities with sub-nanometer gaps should open new avenues for boosting light -matter interaction in nanophotonic systems., Horizon 2020 Framework Programme (829067 THOR); Generalitat Valenciana (PPC/2018/002, PROMETEO/2019/123); Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126); Alexander von Humboldt-Stiftung.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photonic Frequency Conversion of OFDM Microwave Signals in a Wavelength-Scale Optomechanical Cavity

  • Mercadé, Laura|||0000-0002-4994-7727
  • Maria Morant|||0000-0001-5565-7788
  • Griol Barres, Amadeu
  • Roberto Llorente|||0000-0003-4799-2564
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical (OM) cavities enable coupling of near-infrared light and GHz-frequency acoustic waves in wavelength-scale volumes. When driven in the phonon lasing regime, an OM cavity can perform simultaneously as a nonlinear mixer and a local oscillator¿at integer multiples of the mechanical resonance frequency¿in the optical domain. In this work, this property is used to demonstrate all-optical frequency down- and up-conversion of MHz-bandwidth orthogonal frequency division multiplexed signals compliant with the IEEE 802.16e WiMAX wireless standard at microwave frequencies. To this end, a silicon OM crystal cavity (OMCC), supporting a breathing-like mechanical resonance at fm ¿3.9 GHz and having a foot-print ¿ 10 um^2, which yields frequency conversion efficiencies better than ¿17 dB in both down- and up-conversion processes at mW-scale driving power, is employed. This work paves the way toward the application of OMCCs in low-power all-photonic processing of digitally modulated microwave signals in miniaturized silicon photonics chips., The authors acknowledge funding from the H2020 Future and Emerging Technologies program (projects PHENOMEN 713450 and SIOMO 945915); the Spanish State Research Agency (PGC2018-094490-BC21, PID2019-106163RJ-I00/AEI/10.13039/501100011033 MULTICORE+ and MCIU/AEI/FEDER UE RTI2018-101296-B-I00 MULTI-BEAM5G); Generalitat Valenciana (PPC/2021/042, BEST/2020/178, PROMETEO/2019/123 and IDIFEDER/2018/033); and the UPV Programa de Ayudas de Investigacion y Desarrollo (PAID-01-16).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal Properties of Nanocrystalline Silicon Nanobeams

  • Maire, Jeremie
  • Chavez-Angel, Emigdio
  • Arregui, Guillermo
  • Colombano, M. F.
  • Capuj, Nestor
  • Navarro-Urrios, Daniel
  • Ahopelto, J.
  • Sotomayor-Torres, Clivia
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Controlling thermal energy transfer at the nanoscale and thermal properties has become critically important in many applications since it often limits device performance. In this study, the effects on thermal conductivity arising from the nanoscale structure of free-standing nanocrystalline silicon films and the increasing surface-to-volume ratio when fabricated into suspended optomechanical nanobeams are studied. Thermal transport and elucidate the relative impact of different grain size distributions and geometrical dimensions on thermal conductivity are characterized. A micro time-domain thermoreflectance method to study free-standing nanocrystalline silicon films and find a drastic reduction in the thermal conductivity, down to values below 10 W m¿1 K¿1 is used, with a stronger decrease for smaller grains. In optomechanical nanostructures, this effect is smaller than in membranes due to the competition of surface scattering in decreasing thermal conductivity. Finally, a novel versatile contactless characterization technique that can be adapted to any structure supporting a thermally shifted optical resonance is introduced. The thermal conductivity data agrees quantitatively with the thermoreflectance measurements. This study opens the way to a more generalized thermal characterization of optomechanical cavities and to create hotspots with engineered shapes at the desired position in the structures as a means to study thermal transport in coupled photon-phonon structures., This work was supported by the European Commission FET Open project PHENOMEN (G.A. Nr. 713450). ICN2 was supported by the S. Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme / Generalitat de Catalunya. ICN2 authors acknowledge the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). D.N.U. and M.F.C. acknowledge the support of a Ramon y Cajal postdoctoral fellowship (RYC-2014-15392) and a Severo Ochoa studentship, respectively. E.C.A. acknowledges financial support from the EU FET Open Project NANOPOLY. (GA 829061). A.M. acknowledges support from Ministerio de Ciencia, Innovacion y Universidades (grant PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (grants PROMETEO/2019/123, and IDIFEDER/2018/033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dispersive optomechanics of supercavity modes in high-index disks

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Barreda, Ángela
[EN] In this work, we study the dispersive coupling between optical quasi-bound states in the continuum at telecom wavelengths and GHz-mechanical modes in high-index wavelength-sized disks. We show that such cavities can display values of the optomechanical coupling rate on par with optomechanical crystal cavities (g(0)/2 pi similar or equal to 800 kHz). Interestingly, optomechanical coupling of optical resonances with mechanical modes at frequencies well above 10 GHz seems attainable. We also show that mechanical leakage in the substrate can be extremely reduced by placing the disk over a thin silica pedestal. Our results suggest a new route for ultra-compact optomechanical cavities that can potentially be arranged in massive arrays forming optomechanical metasurfaces for application in signal processing or sensing., Alexander von Humboldt-Stiftung; Generalitat Valenciana (BEST/2020/178, IDIFEDER/2018/033, PPC/2018/002, PROMETEO/2019/123); Ministerio de Ciencia, Innovación y Universidades (PGC2018- 094490-BC22); H2020 Future and Emerging Technologies (713450, 829067).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid photonic-plasmonic cavities based on the nanoparticle-on-a-mirror configuration

  • Barreda, Ángela
  • Zapata-Herrera, Mario
  • Palstra, Isabelle M.
  • Mercadé, Laura
  • Aizpurua, Javier
  • Koenderink, A. F.
  • Martínez, Alejandro
Hybrid photonic-plasmonic cavities have emerged as a new platform to increase light–matter interaction capable to enhance the Purcell factor in a singular way not attainable with either photonic or plasmonic cavities separately. In the hybrid cavities proposed so far, the plasmonic element is usually a metallic bow-tie antenna, so the plasmonic gap—defined by lithography—is limited to minimum values of several nanometers. Nanoparticle-on-a-mirror (NPoM) cavities are far superior to achieve the smallest possible mode volumes, as plasmonic gaps smaller than 1 nm can be created. Here, we design a hybrid cavity that combines an NPoM plasmonic cavity and a dielectric-nanobeam photonic crystal cavity operating at transverse-magnetic polarization. The metallic nanoparticle can be placed very close (<1 nm) to the upper surface of the dielectric cavity, which acts as a low-reflectivity mirror. We demonstrate through numerical calculations of the local density of states that this hybrid plasmonic-photonic cavity exhibits quality factors 𝑄 above 103 and normalized mode volumes 𝑉 down to 10−3, thus resulting in high Purcell factors (𝐹𝑃≈105), while being experimentally feasible with current technology. Our results suggest that hybrid cavities with sub-nanometer gaps should open new avenues for boosting light–matter interaction in nanophotonic systems., Horizon 2020 Framework Programme (829067 THOR); Generalitat Valenciana (PPC/2018/002, PROMETEO/2019/123); Ministerio de Ciencia, Innovación y Universidades (PGC2018-094490-B, PRX18/00126); Alexander von Humboldt-Stiftung., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal Properties of Nanocrystalline Silicon Nanobeams

  • Maire, Jeremie
  • Chávez-Angel, Emigdio
  • Arregui, Guillermo
  • Colombano, Martin F.
  • Capuj, Néstor E.
  • Griol, Amadeu
  • Martínez, Alejandro
  • Navarro-Urrios, D.
  • Ahopelto, Jouni
  • Sotomayor Torres, C. M.
Controlling thermal energy transfer at the nanoscale and thermal properties has become critically important in many applications since it often limits device performance. In this study, the effects on thermal conductivity arising from the nanoscale structure of free-standing nanocrystalline silicon films and the increasing surface-to-volume ratio when fabricated into suspended optomechanical nanobeams are studied. Thermal transport and elucidate the relative impact of different grain size distributions and geometrical dimensions on thermal conductivity are characterized. A micro time-domain thermoreflectance method to study free-standing nanocrystalline silicon films and find a drastic reduction in the thermal conductivity, down to values below 10 W m–1 K–1 is used, with a stronger decrease for smaller grains. In optomechanical nanostructures, this effect is smaller than in membranes due to the competition of surface scattering in decreasing thermal conductivity. Finally, a novel versatile contactless characterization technique that can be adapted to any structure supporting a thermally shifted optical resonance is introduced. The thermal conductivity data agrees quantitatively with the thermoreflectance measurements. This study opens the way to a more generalized thermal characterization of optomechanical cavities and to create hot-spots with engineered shapes at the desired position in the structures as a means to study thermal transport in coupled photon-phonon structures., This work was supported by the European Commission FET Open project PHENOMEN (G.A. Nr. 713450). ICN2 was supported by the S. Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme / Generalitat de Catalunya. ICN2 authors acknowledge the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). D.N.U. and M.F.C. acknowledge the support of a Ramón y Cajal postdoctoral fellowship (RYC-2014-15392) and a Severo Ochoa studentship, respectively. E.C.A. acknowledges financial support from the EU FET Open Project NANOPOLY. (GA 829061). A.M. acknowledges support from Ministerio de Ciencia, Innovación y Universidades (grant PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (grants PROMETEO/2019/123, and IDIFEDER/2018/033).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Room-temperature silicon platform for GHz-frequency nanoelectro-opto-mechanical systems

  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Colombano Sosa, Martin|||0000-0002-2003-8597
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Madiot, Guilhem|||0000-0003-2662-4324
  • Pitanti, Alessandro|||0000-0002-7027-0300
  • Griol, Amadeu|||0000-0002-5428-5713
  • Makkonen, Tapani
  • Ahopelto, Jouni|||0000-0003-3372-6097
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Martínez, Alejandro|||0000-0001-5448-0140
Nanoelectro-opto-mechanical systems enable the synergistic coexistence of electrical, mechanical, and optical signals on a chip to realize new functions. Most of the technology platforms proposed for the fabrication of these systems so far are not fully compatible with the mainstream CMOS technology, thus, hindering the mass-scale utilization. We have developed a CMOS technology platform for nanoelectro-opto-mechanical systems that includes piezoelectric interdigitated transducers for electronic driving of mechanical signals and nanocrystalline silicon nanobeams for an enhanced optomechanical interaction. Room-Temperature operation of devices at 2 GHz and with peak sensitivity down to 2.6 cavity phonons is demonstrated. Our proof-of-principle technology platform can be integrated and interfaced with silicon photonics, electronics, and MEMS devices and may enable multiple functions for coherent signal processing in the classical and quantum domains.