Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fracturing of polycrystalline MoS2 nanofilms

  • Sledzinska, Marianna
  • Jumbert, Gil
  • Placidi, Marcel
  • Arrighi, Aloïs
  • Xiao, Peng
  • Alzina, Francesc
  • Sotomayor Torres, C. M.
The possibility of tailoring the critical strain of two-dimensional (2D) materials will be crucial for the fabrication of flexible and stretchable devices. While crystalline MoS2 monolayer shows tensile strength comparable to that of steel, a large concentration of defects and grain boundaries in polycrystalline MoS2 significantly degrades its mechanical properties. In this paper, the fracture in polycrystalline MoS2 films with an average grain size below 10 nm is studied at the micro- and nanoscale using electron microscopy. Two samples with different thicknesses and grain orientations horizontal and vertical to the sample plane are measured. The critical uniaxial strain is determined to be approximately 5% and independent of the sample morphology. However, electron beam irradiation is found to enhance the interaction between MoS2 and polydimethylsiloxane (PDMS) substrates, leading to an increased critical strain that can exceed 10%. This enhancement of strain resistance was used to fabricate a mechanically robust array of MoS2 lines 1 mm in length. Finally, nanoscale crack propagation studied by transmission electron microscopy showed that cracks propagate along the grain boundaries as well as through the grains, preferentially along van der Waals planes. These results provide insight into the fracture of polycrystalline 2D materials and a method to enhance the critical strain., ICN2 is funded by the CERCA program/Generalitat de Catalunya and supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). We acknowledge support from the EU Project NANOPOLY (GA 289061) and the Spanish MICINN project SIP (PGC2018-101743-BI00). M.S. thanks D. Torres Navarro for his support in figure preparation. M.P. acknowledges the support from Spanish Ministry of Science, Innovation and Universities within the Ramon y Cajal Program (RYC-2017-23758). P.X. is supported by a M. Sklodowska-Curie Fellowship (COFUND BIST Predoctoral Programme, PREBIST project, Grant No. 754558)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal Properties of Nanocrystalline Silicon Nanobeams

  • Maire, Jeremie
  • Chávez-Angel, Emigdio
  • Arregui, Guillermo
  • Colombano, Martin F.
  • Capuj, Néstor E.
  • Griol, Amadeu
  • Martínez, Alejandro
  • Navarro-Urrios, D.
  • Ahopelto, Jouni
  • Sotomayor Torres, C. M.
Controlling thermal energy transfer at the nanoscale and thermal properties has become critically important in many applications since it often limits device performance. In this study, the effects on thermal conductivity arising from the nanoscale structure of free-standing nanocrystalline silicon films and the increasing surface-to-volume ratio when fabricated into suspended optomechanical nanobeams are studied. Thermal transport and elucidate the relative impact of different grain size distributions and geometrical dimensions on thermal conductivity are characterized. A micro time-domain thermoreflectance method to study free-standing nanocrystalline silicon films and find a drastic reduction in the thermal conductivity, down to values below 10 W m–1 K–1 is used, with a stronger decrease for smaller grains. In optomechanical nanostructures, this effect is smaller than in membranes due to the competition of surface scattering in decreasing thermal conductivity. Finally, a novel versatile contactless characterization technique that can be adapted to any structure supporting a thermally shifted optical resonance is introduced. The thermal conductivity data agrees quantitatively with the thermoreflectance measurements. This study opens the way to a more generalized thermal characterization of optomechanical cavities and to create hot-spots with engineered shapes at the desired position in the structures as a means to study thermal transport in coupled photon-phonon structures., This work was supported by the European Commission FET Open project PHENOMEN (G.A. Nr. 713450). ICN2 was supported by the S. Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme / Generalitat de Catalunya. ICN2 authors acknowledge the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). D.N.U. and M.F.C. acknowledge the support of a Ramón y Cajal postdoctoral fellowship (RYC-2014-15392) and a Severo Ochoa studentship, respectively. E.C.A. acknowledges financial support from the EU FET Open Project NANOPOLY. (GA 829061). A.M. acknowledges support from Ministerio de Ciencia, Innovación y Universidades (grant PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (grants PROMETEO/2019/123, and IDIFEDER/2018/033).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset related to the publication "Thermal properties of nanocrystalline silicon nanobeams"

  • Maire, Jeremie
  • Chávez-Angel, Emigdio
  • Arregui, Guillermo
  • Colombano, Martin F.
  • Capuj, Néstor E.
  • Griol, Amadeu
  • Martínez, Alejandro
  • Navarro-Urrios, D.
  • Ahopelto, Jouni
  • Sotomayor Torres, C. M.
Dataset contains the raw data from which the graphs in paper "Thermal properties of nanocrystalline silicon nanobeams"., Grants: European Commission: PHENOMEN - All-Phononic circuits Enabled by Opto-mechanics (713450) NANOPOLY - Artificial permittivity and permeability engineering for future generation sub wavelength analogue integrated circuits and systems (829061), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal properties of nanocrystalline silicon nanobeams

  • Maire, Jeremie|||0000-0002-9921-4804
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Colombano Sosa, Martin|||0000-0002-2003-8597
  • Capuj, Nestor Eduardo|||0000-0002-9042-2041
  • Griol, Amadeu|||0000-0002-5428-5713
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Ahopelto, Jouni|||0000-0003-3372-6097
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Controlling thermal energy transfer at the nanoscale and thermal properties has become critically important in many applications since it often limits device performance. In this study, the effects on thermal conductivity arising from the nanoscale structure of free-standing nanocrystalline silicon films and the increasing surface-to-volume ratio when fabricated into suspended optomechanical nanobeams are studied. Thermal transport and elucidate the relative impact of different grain size distributions and geometrical dimensions on thermal conductivity are characterized. A micro time-domain thermoreflectance method to study free-standing nanocrystalline silicon films and find a drastic reduction in the thermal conductivity, down to values below 10 W m K is used, with a stronger decrease for smaller grains. In optomechanical nanostructures, this effect is smaller than in membranes due to the competition of surface scattering in decreasing thermal conductivity. Finally, a novel versatile contactless characterization technique that can be adapted to any structure supporting a thermally shifted optical resonance is introduced. The thermal conductivity data agrees quantitatively with the thermoreflectance measurements. This study opens the way to a more generalized thermal characterization of optomechanical cavities and to create hot-spots with engineered shapes at the desired position in the structures as a means to study thermal transport in coupled photon-phonon structures.