Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Semiconductivity Transition in Silicon Nanowires by Hole Transport Layer

  • Shalabny, Awad
  • Buonocore, Francesco
  • Celino, Massimo
  • Shalev, Gil
  • Zhang, Lu
  • Wu, Weiwei
  • Li, Peixian
  • Arbiol, Jordi
  • Bashouti, Muhammad Y.
The surface of nanowires is a source of interest mainly for electrical prospects. Thus, different surface chemical treatments were carried out to develop recipes to control the surface effect. In this work, we succeed in shifting and tuning the semiconductivity of a Si nanowire-based device from n- to p-type. This was accomplished by generating a hole transport layer at the surface by using an electrochemical reaction-based nonequilibrium position to enhance the impact of the surface charge transfer. This was completed by applying different annealing pulses at low temperature (below 400 °C) to reserve the hydrogen bonds at the surface. After each annealing pulse, the surface was characterized by XPS, Kelvin probe measurements, and conductivity measured by FET based on a single Si NW. The mechanism and conclusion were supported experimentally and theoretically. To this end, this strategy has been demonstrated as an essential tool which could pave a new road for regulating semiconductivity and for other low-dimensional nanomaterials., M.B. is thankful for the MAOF Grant from the Council for Higher Education in Israel for new faculty members. A.S. is appreciative of the institutional scholarships for Ph.D. students that they received from Ben-Gurion University of the Negev. W.W. is thankful for the fundamental research funds from the Central Universities (JC2002). L.Z. is thankful for the support of a postdoctoral fellowship from the Jacob Blaustein Center for Scientific Cooperation, the National Natural Science Foundation of China (61904134), and the National Natural Science Foundation of Shaanxi Province (2019JQ-291). The computing resources and the related technical support used for this work have been provided by CRESCO/ENEAGRID High Performance Computing infrastructure and its staff, along with additional support from S. Migliori and S. Giusepponi. E.N.E.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 824158 (EoCoE-II). J.A. acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Towards zero-waste recovery and zero-overhead checkpointing in ensemble data assimilation

  • Keller, Kai Rasmus
  • Cristal Kestelman, Adrián|||0000-0003-1277-9296
  • Bautista Gomez, Leonardo|||0000-0002-0814-5779
Ensemble data assimilation is a powerful tool for increasing the accuracy of climatological states. It is based on combining observations with the results from numerical model simulations. The method comprises two steps, (1) the propagation, where the ensemble states are advanced by the numerical model and (2) the analysis, where the model states are corrected with observations. One bottleneck in ensemble data assimilation is circulating the ensemble states between the two steps. Often, the states are circulated using files. This article presents an extended implementation of Melissa-DA, an in-memory ensemble data assimilation framework, allowing zero-overhead checkpointing and recovery with few or zero recomputation. We hide the checkpoint creation using dedicated threads and MPI processes. We benchmark our implementation with up to 512 members simulating the Lorenz96 model using 10 9 gridpoints. We utilize up to 8 K processes and 8 TB of checkpoint data per cycle and reach a peak performance of 52 teraFLOPS., Part of the research presented here has received funding from the Horizon 2020 (H2020) funding framework under grant/award number: 824158; Energy oriented Centre of Excellence II (EoCoE-II)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Design and study of elastic recovery in HPC applications

  • Keller, Kai Rasmus
  • Parasyris, Konstantinos
  • Bautista Gomez, Leonardo|||0000-0002-0814-5779
The efficient utilization of current supercomputing systems with deep storage hierarchies demands scientific applications that are capable of leveraging such heterogeneous hardware. Fault tolerance, and checkpointing in particular, is one of the most time-consuming aspects if not handled correctly. High checkpoint performance can be achieved using optimized multilevel checkpoint and restart libraries. Unfortunately, those libraries do not allow for restarts with a modified number of processes or scientific post-processing of the checkpointed data. This is because they typically use an N-N checkpointing scheme and opaque file-formats. In this article, we present a novel mechanism to asynchronously store checkpoints into a self-descriptive file format and load the data upon recovery with a different number of processes. We provide an API that defines the process-local data as part of a globally shared dataset. Our measurements demonstrate a low overhead between 0.6% and 2.5% for a 2.25 TB checkpoint with 6K processes., Part of the research presented here has received funding from the Horizon 2020 (H2020) funding framework under grant/award number: 824158; Energy oriented Centre of Excellence II (EoCoE-II). The present publication reflects only the authors’ views. The European Commission is not liable for any use that might be made of the information contained therein. This work was partially performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DEAC52-07NA2734 (LLNLCONF-811845)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

The ALEX17 diurnal cycles in complex terrain benchmark

  • Sanz Rodrigo, Javier
  • Santos, Pedro
  • Chávez Arroyo, R
  • Avila, Matias
  • Cavar, Dalibor
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Owen, Herbert
  • Li, R
  • Tromeur, Eric
The NEWA ALEX17 experiment was conducted with the objective of characterizing the wind conditions upstream of the Alaiz Test Site for the validation of flow models. From the intensive operational period, a case study has been selected for a Wakebench benchmark consisting of four consecutive days with relatively persistent winds from the North. The validation is centered around a 118-m mast at the Alaiz site and six additional masts located along the valley and at the lee side of a ridge delimiting a 8-km long area of interest. The benchmark is a follow-up of the GABLS3 diurnal cycle benchmark in flat terrain to test mesoscale-to-microscale transient and steady-state modeling methodologies in the assessment of stability-dependent bin-averaged wind conditions. Meso-micro methodologies reduce the wind speed mean bias from 32%, at 3-km mesoscale, to ±5%. Beyond mean bias mitigation, these initial results demonstrate the added value of meso-micro coupling at reproducing non conventional wind conditions at the test site like high-shear low-level jets in stable conditions and negative wind shear in unstable conditions. The benchmark also discusses the challenges of each meso-micro methodology going forward., This work was carried out under the umbrella of the International Energy Agency IEA-Wind TCP Task 31 Wakebench, with the support from: MARINE2 (EU grant agreement number 731084) UPWARDS (EU grant agreement number 763990), EoCoE-II (EU grant agreements number 824158 and 828947) and the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement number B-S-69926, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Wall‐modeled large‐eddy simulation in a finite element framework

  • Owen, Herbert
  • Chrysokentis, Georgios
  • Avila, Matias
  • Mira Martínez, Daniel
  • Houzeaux, Guillaume|||0000-0002-2592-1426
  • Cajas, Juan Carlos
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
This work studies the implementation of wall modeling for large‐eddy simulation in a finite element context. It provides a detailed description of how the approach used by the finite volume and finite differences communities is adapted to the finite element context. The new implementation is as simple and easy to implement as the classical finite element one, but it provides vastly superior results. In the typical approach used in finite elements, the mesh does not extend all the way to the wall, and the wall stress is evaluated at the first grid point, based on the velocity at the same point. Instead, we adopt the approach commonly used in finite differences, where the mesh covers the whole domain and the wall stress is obtained at the wall grid point, with the velocity evaluated at the first grid point off the wall. The method is tested in a turbulent channel flow at R e τ =2003, a neutral atmospheric boundary layer flow, and a flow over a wall‐mounted hump, with significant improvement in the results compared to the standard finite element approach. Additionally, we examine the effect of evaluating the input velocity further away from the wal, This work was supported by the Energy oriented Centre of Excellence II (EoCoE‐II), grant agreement number 824158, funded within the Horizon2020 framework of the European Union. We would also like to acknowledge PRACE for awarding us access to the following resources: GCS Supercomputer SuperMUC at Leibniz Supercomputing Centre (www.lrz.de), Marconi at CINECA (http://www.hpc.cineca.it/), and TGCC Curie at CEA‐GENCI (http://www‐hpc.cea.fr). The authors thankfully acknowledges the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (RES‐AECT‐2018‐3‐0028)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Design and study of elastic recovery in HPC applications

  • Keller, Kai Rasmus
  • Parasyris, Konstantinos
  • Bautista Gomez, Leonardo
The efficient utilization of current supercomputing systems with deep storage hierarchies demands scientific applications that are capable of leveraging such heterogeneous hardware. Fault tolerance, and checkpointing in particular, is one of the most time-consuming aspects if not handled correctly. High checkpoint performance can be achieved using optimized multilevel checkpoint and restart libraries. Unfortunately, those libraries do not allow for restarts with a modified number of processes or scientific post-processing of the checkpointed data. This is because they typically use an N-N checkpointing scheme and opaque file-formats. In this article, we present a novel mechanism to asynchronously store checkpoints into a self-descriptive file format and load the data upon recovery with a different number of processes. We provide an API that defines the process-local data as part of a globally shared dataset. Our measurements demonstrate a low overhead between 0.6% and 2.5% for a 2.25 TB checkpoint with 6K processes., Part of the research presented here has received funding from the Horizon 2020 (H2020) funding framework under grant/award number: 824158; Energy oriented Centre of Excellence II (EoCoE-II). The present publication reflects only the authors’ views. The European Commission is not liable for any use that might be made of the information contained therein. This work was partially performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DEAC52-07NA2734 (LLNLCONF-811845)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Wall‐modeled large‐eddy simulation in a finite element framework

  • Owen, Herbert
  • Chrysokentis, Georgios
  • Avila, Matias
  • Mira Martínez, Daniel
  • Houzeaux, Guillaume
  • Cajas, Juan Carlos
  • Lehmkuhl Barba, Oriol
This work studies the implementation of wall modeling for large‐eddy simulation in a finite element context. It provides a detailed description of how the approach used by the finite volume and finite differences communities is adapted to the finite element context. The new implementation is as simple and easy to implement as the classical finite element one, but it provides vastly superior results. In the typical approach used in finite elements, the mesh does not extend all the way to the wall, and the wall stress is evaluated at the first grid point, based on the velocity at the same point. Instead, we adopt the approach commonly used in finite differences, where the mesh covers the whole domain and the wall stress is obtained at the wall grid point, with the velocity evaluated at the first grid point off the wall. The method is tested in a turbulent channel flow at R e τ =2003, a neutral atmospheric boundary layer flow, and a flow over a wall‐mounted hump, with significant improvement in the results compared to the standard finite element approach. Additionally, we examine the effect of evaluating the input velocity further away from the wal, This work was supported by the Energy oriented Centre of Excellence II (EoCoE‐II), grant agreement number 824158, funded within the Horizon2020 framework of the European Union. We would also like to acknowledge PRACE for awarding us access to the following resources: GCS Supercomputer SuperMUC at Leibniz Supercomputing Centre (www.lrz.de), Marconi at CINECA (http://www.hpc.cineca.it/), and TGCC Curie at CEA‐GENCI (http://www‐hpc.cea.fr). The authors thankfully acknowledges the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (RES‐AECT‐2018‐3‐0028)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Towards zero-waste recovery and zero-overhead checkpointing in ensemble data assimilation

  • Keller, Kai Rasmus
  • Cristal Kestelman, Adrián
  • Bautista Gomez, Leonardo
Ensemble data assimilation is a powerful tool for increasing the accuracy of climatological states. It is based on combining observations with the results from numerical model simulations. The method comprises two steps, (1) the propagation, where the ensemble states are advanced by the numerical model and (2) the analysis, where the model states are corrected with observations. One bottleneck in ensemble data assimilation is circulating the ensemble states between the two steps. Often, the states are circulated using files. This article presents an extended implementation of Melissa-DA, an in-memory ensemble data assimilation framework, allowing zero-overhead checkpointing and recovery with few or zero recomputation. We hide the checkpoint creation using dedicated threads and MPI processes. We benchmark our implementation with up to 512 members simulating the Lorenz96 model using 10 9 gridpoints. We utilize up to 8 K processes and 8 TB of checkpoint data per cycle and reach a peak performance of 52 teraFLOPS., Part of the research presented here has received funding from the Horizon 2020 (H2020) funding framework under grant/award number: 824158; Energy oriented Centre of Excellence II (EoCoE-II)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The ALEX17 diurnal cycles in complex terrain benchmark

  • Sanz Rodrigo, Javier
  • Santos, Pedro
  • Chávez Arroyo, R
  • Avila, Matias
  • Cavar, Dalibor
  • Lehmkuhl Barba, Oriol
  • Owen, Herbert
  • Li, R
  • Tromeur, Eric
The NEWA ALEX17 experiment was conducted with the objective of characterizing the wind conditions upstream of the Alaiz Test Site for the validation of flow models. From the intensive operational period, a case study has been selected for a Wakebench benchmark consisting of four consecutive days with relatively persistent winds from the North. The validation is centered around a 118-m mast at the Alaiz site and six additional masts located along the valley and at the lee side of a ridge delimiting a 8-km long area of interest. The benchmark is a follow-up of the GABLS3 diurnal cycle benchmark in flat terrain to test mesoscale-to-microscale transient and steady-state modeling methodologies in the assessment of stability-dependent bin-averaged wind conditions. Meso-micro methodologies reduce the wind speed mean bias from 32%, at 3-km mesoscale, to ±5%. Beyond mean bias mitigation, these initial results demonstrate the added value of meso-micro coupling at reproducing non conventional wind conditions at the test site like high-shear low-level jets in stable conditions and negative wind shear in unstable conditions. The benchmark also discusses the challenges of each meso-micro methodology going forward., This work was carried out under the umbrella of the International Energy Agency IEA-Wind TCP Task 31 Wakebench, with the support from: MARINE2 (EU grant agreement number 731084) UPWARDS (EU grant agreement number 763990), EoCoE-II (EU grant agreements number 824158 and 828947) and the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement number B-S-69926, Peer Reviewed, Postprint (published version)