Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

3D Magnetotelluric Modeling Using High-Order Tetrahedral Nédélec Elements on Massively Parallel Computing Platforms

  • Castillo Reyes, Octavio
  • Modesto, David
  • Queralt, Pilar
  • Marcuello, Alex
  • Ledo, Juanjo
  • Amor Martín, Adrián
  • de la Puente, Josep
  • García Castillo, Luis Emilio
We present a routine for 3D magnetotelluric (MT) modeling based upon high-order edge finite element method (HEFEM), tailored and unstructured tetrahedral meshes, and high-performance computing (HPC). This implementation extends the PETGEM modeller capabilities, initially developed for active-source electromagnetic methods in frequency-domain. We assess the accuracy, robustness, and performance of the code using a set of reference models developed by the MT community in well-known reported workshops. The scale and geological properties of these 3D MT setups are challenging, making them ideal for addressing a rigorous validation. Our numerical assessment proves that this new algorithm can produce the expected solutions for arbitrarily 3D MT models. Also, our extensive experimental results reveal four main insights: (1) high-order discretizations in conjunction with tailored meshes can offer excellent accuracy; (2) a rigorous mesh design based on the skin-depth principle can be beneficial for the solution of the 3D MT problem in terms of numerical accuracy and run-time; (3) high-order polynomial basis functions achieve better speed-up and parallel efficiency ratios than low-order polynomial basis functions on cutting-edge HPC platforms; (4) a triple helix approach based on HEFEM, tailored meshes, and HPC can be extremely competitive for the solution of realistic and complex 3D MT models and geophysical electromagnetics in general., This project has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain– France–Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French–Spanish–Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favoring sustainable territorial development. BSC authors received funding from the European Union’s Horizon 2020 programme, grant agreement N◦828947 and N◦777778, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement N◦B-S-69926.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparison of the Diffusive Flame Structure for Dodecane and OMEX Fuels for Conditions of Spray A of the ECN

  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
  • Micó, Carlos|||0000-0001-5787-6212
  • Tejada-Magraner, Francisco José|||0000-0001-6851-5084
[EN] A comparison of the flame structure for two different fuels, dodecane and oxymethylene dimethyl ether (OMEX), has been performed under condition of Spray A of the Engine Combustion Network (ECN). The experiments were carried out in a constant pressure vessel with wide optical access, at high pressure and temperature and controlled oxygen concentration. The flame structure analysis has been performed by measuring the formaldehyde and OH radical distributions using planar Laser-Induced Fluorescence (PLIF) techniques. To complement the analysis, this information was combined with that obtained with high-speed imaging of OH* chemiluminescence radiation in the UV. Formaldehyde molecules are excited with the 355-nm radiation from the third harmonic of a Nd:YAG laser, whilst OH is excited with a wavelength of 281.00-nm from a dye laser. In both cases, the beam was transformed into a laser sheet in order to excite an axial flame plane and the fluorescence radiation was collected with an intensified camera (ICCD) and proper filtering. Consequently, two-dimensional maps in the axial flame plane were obtained at different instants after the start of injection (ASOI). Signal from both formaldehyde and OH chemical species can be compared, in order to analyze spatial distribution and interaction. When dodecane and OMEX are compared, several differences arise. The second one presents larger lift-off length but remarkably shorter flame length. Additionally, it has been possible to appreciate for this fuel a lower amount of soot formation during combustion., The research leading to these results has received funding from the European Union's Horizon 2020 Programme, grant agreement n° 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n° B-S-69926.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

LES study on spray combustion with renewable fuels under ECN Spray-A conditions

  • Mira Martínez, Daniel
  • Pérez-Sánchez, Eduardo J.
  • Surapaneni, Anurag
  • De Leon-Ceriani, Daiana
  • Benajes, Jesús|||0000-0002-1653-9188
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
[EN] Poly-Oxymethylene Dimethyl Ethers (OMEx) are being intensively investigated because of their potentially renewable synthesis path, which make them suitable as liquid fuels for low-carbon transport applications. In the present contribution, a computational study on the difference in combustion characteristics between dodecane and OMEx-type fuels under Engine Combustion Network (ECN) Spray A conditions is reported. In particular, a blend of different OMEx fuels have been investigated and compared to dodecane, which is a more conventional diesellike fuel. The modelling framework consists of a high-fidelity LES approach together with a Eulerian-Lagrangian spray model and flamelet-based turbulent combustion model. Results indicate ignition delay time and lift-off length according to the fuel reactivity properties, with the OMEx fuel performing similarly to dodecane. Flamelet calculations show that ignition of the oxygenated fuels is in general similar to that of dodecane, but it occurs at higher mixture fraction values due to the differences in stoichiometry. One of the most relevant outcomes of the study is the important effect that the oxygenated characteristics of OMEx has on the flame structure. Results show that for OMEx the reaction front is stabilized at distances closer to the nozzle than for dodecane, and that the flame shape as well as its internal structure is clearly affected., The research leading to these results has received funding through the ENERXICO project from the European Union's Horizon 2020 Programme, grant agreement n° 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n° B-S-69926 and the Spanish Ministry of Economy and Competitiveness in the frame of the CHEST project (TRA2017-89139-C2-2-R). Furthermore, computer resources and technical assistance has been provided by the Red Espanola de Supercomputación (RES) (IM-2021-1-00214, IM-2020-3-0029, IM-2020-2-0023,IM-2020-1-0013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Experimental Study of the Fuel Effect on Diffusion Combustion and Soot Formation under Diesel Engine-Like Conditions

  • García Carrero, Alba Andreina
[ES] Las emisiones de CO2 en el sector transporte se han incrementado considerablemente durante los últimos años debido al desarrollo económico mundial. El crecimiento de las flotas de transporte, junto con otros factores, ha contribuido al desequilibrio del ciclo de carbono del planeta. Es por ello que el CO2 se considera un gas de efecto invernadero de origen antropogénico que debe ser reducido para evitar el calentamiento global. Las estrategias para reducir el CO2 en el sector transporte están enfocadas a la electrificación y al uso de combustibles neutros o de bajo impacto al ambiente. Sin embargo, una efectiva implementación de esta última requiere un profundo entendimiento de la combustión con tales combustibles. En la presente tesis doctoral, se ha caracterizado experimentalmente la combustión de diferentes tipos de combustibles, entre ellos, algunos de bajo impacto en emisiones de CO2 como lo son el Aceite Vegetal Hidrotratado (HVO) y dos éteres de oximetileno (OME1 y OMEx).Además, por su potencial en la reducción de contaminantes se han evaluado mezclas de diésel y gasolina y de HVO y Gas Licuado de Petróleo (LPG), lo que requirió adecuar el sistema de inyección para evitar la evaporación a lo largo de la línea. Todos estos combustibles y mezclas han sido inyectados con una tobera mono-orificio y han sido evaluados mediante técnicas de visualización a alta velocidad bajo diferentes condiciones termodinámicas típicas de un motor de encendido por compresión operando en condiciones de combustión a baja temperatura, en instalaciones con accesos ópticos. Se ha analizado el efecto de las propiedades físico químicas de estos combustibles y mezclas sobre los parámetros característicos de un chorro como lo son la longitud líquida y la penetración de vapor. La combustión ha sido evaluada mediante la caracterización del tiempo de retraso, de la liberación de calor y la longitud del despegue de la llama, que viene condicionada por el proceso de mezcla. Igualmente, el estudio de la formación de hollín en función de las propiedades del combustible y de las características del proceso de mezcla, representa un aporte importante de esta tesis. En adición a los beneficios en reducción de CO2 que brindan los combustibles y mezclas utilizados en este estudio, estos también redujeron la formación de hollín en la cámara de combustión, destacándose entre ellos los combustibles oxigenados, especialmente el OMEx que además de no formar hollín, fue el de mayor reactividad en todas las condiciones de operación evaluadas., [CA] Les emissions de CO2 en el sector transport s'han incrementat considerablement durant els últims anys a causa del desenvolupament econòmic mundial. El creixement de les flotes de transport, juntament amb altres factors, ha contribuït al desequilibri del cicle de carboni del planeta. És per això, que el CO2 es considera un gas d'efecte hivernacle d'origen antropogènic que ha de ser reduït per evitar l'escalfament global. Les estratègies per reduir el CO2 dins el sector transport, estan enfocades a l'electrificació i a l'ús de combustibles neutres o de baix impacte ambiental. No obstant això, una efectiva implementació d'aquesta última, requereix un profund coneixement del procés de combustió d'aquests combustibles. En la present tesi doctoral, s'ha caracteritzat experimentalment la combustió de diferents tipus de combustibles, entre ells, alguns de baix impacte en emissions de CO2 com són l'Oli Vegetal Hidrotratat (HVO) i dos èters de oximetileno (OME1 i OMEx) .A més , degut al seu alt potencial en la reducció de contaminants, s'han avaluat mescles de dièsel i gasolina, i de HVO i Gas Liquat de Petroli (LPG), el que va requerir adequar el sistema d'injecció per evitar l'evaporació al llarg de la línia. Tots aquests combustibles i mescles han estat injectats amb una tovera mono-orifici i han estat avaluats mitjançant tècniques de visualització a alta velocitat a través dels accessos òptics del que disposa la instal·lació. Les diferents condicions termodinàmiques utilitzades son típiques d'un motor d'encesa per compressió operant en condicions de combustió a baixa temperatura. S'ha analitzat l'efecte de les propietats fisicoquímiques d'aquests combustibles i de les mescles sobre els paràmetres característics d'un raig com són la longitud líquida i la penetració de vapor. La combustió ha estat avaluada mitjançant la caracterització del temps de retard, de l'alliberació de calor i de la longitud de l'enlairament de la flama que ve condicionada pel procés de mescla. A més, l'estudi de la formació de sutge en funció de les propietats del combustible i de les característiques del procés de mescla, representa una aportació important d'aquesta tesi evidenciant que a més dels beneficis en reducció de CO2 que brinden tots aquests combustibles i mescles, també varen reduir la formació de sutge a la cambra de combustió, destacant-se entre ells els combustibles oxigenats, especialment el OMEx, que a més de no formar sutge, va ser el de major reactivitat en totes les condicions d'operació avaluades., [EN] CO2 emissions in the transport sector have increased considerably in recent years due to global economic development. The growth of transport fleets, along with other factors, has contributed to the imbalance of the planet's carbon cycle. For that, CO2 is considered a greenhouse gas from anthropogenic origin that must be reduced to avoid global warming. Strategies to reduce CO2 in the transport sector are focused on electrification and the use of neutral fuels or those with a low impact on the environment. However, an effective implementation of the latter requires a deep understanding of the combustion with those fuels. In this doctoral thesis, the combustion of different types of fuels has been experimentally characterized, including some with low impact on CO2 emissions such as Hydrotreated Vegetable Oil (HVO) and two oxymethylene ethers (OME1 and OMEx). Furthermore, due to their potential in reducing pollutants, blends of diesel and gasoline and HVO and Liquefied Petroleum Gas (LPG) have also been evaluated, which required adapting the injection system to avoid evaporation along the injection line. All these fuels and blends have been injected with a single-hole nozzle and they have been evaluated using high speed visualization techniques under different thermodynamic conditions typical of a compression ignition engine operating under low-temperature combustion conditions in installations with optical accesses. The effect of the physical-chemical properties of these fuels and blends on the characteristic parameters of a jet, such as the liquid length and the vapor penetration, has been analyzed. Combustion has been evaluated by characterizing the ignition delay, the heat release and the flame Lift-off length that is conditioned by the mixing process. Furthermore, the study of soot formation based on the fuel properties and the characteristics of the mixing process represents an important contribution of this thesis, showing that in addition to the benefits in CO2 reduction provided by the different fuels and blends used in this study, these fuels also reduced the soot formation in the combustion chamber, highlighting among them the oxygenated fuels, especially OMEx which, in addition to not forming soot, was the most reactive in all conditions of operation evaluated., This research has been partly funded by the Government of Spain and FEDER under TRANCO project (TRA2017-87694-R), by the European Union’s Horizon 2020 Programme through the ENERXICO project, grant agreement n° 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n° B-S-69926 and by Universitat Politècnica de València through the Programa de Ayudas de Investigación y Desarrollo (PAID-01-18 and PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of the oxymethylene ether fuels flame structure for ECN Spray A and Spray D nozzles

  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
  • Micó, Carlos|||0000-0001-5787-6212
  • Tejada-Magraner, Francisco José|||0000-0001-6851-5084
[EN] Synthetic fuels will play a major role on the reduction of pollutant emissions and carbon footprint of ICE engines. The use of renewable energy and CO2 for its production maps out a promising route to achieve ICE carbon neutrality. Among these fuels, oxymethylene ethers are also interesting for their potential to drastically reduce soot formation. However, a proper characterization of their properties and behaviour is mandatory to reach full implementation in commercial engines. For this reason, this work presents a detailed characterization of the flame structure of two types of oxymethylene ethers (OMEX and OME1) using high-speed chemiluminescence imaging and Planar Laser-Induced Fluorescence (PLIF). Test were performed in a constant-pressure combustion vessel, with the operating conditions and two different injector nozzles from the Engine Combustion Network (Spray A and Spray D). Regions associated with low-temperature chemical reactions are observed thanks to the formaldehyde PLIF while evolution of the high-temperature reactions has been analysed based on hydroxyl excited state (OH*) chemiluminescence and hydroxyl PLIF. On-resonant and off-resonant measurements were performed for OH PLIF with a dye laser in order to remove other radiation sources not linked to OH fluorescence, whilst 355 nm radiation from the third harmonic of a Nd:YAG laser are used to excite CH2O molecules. On the one hand, the results show that the combustion of OME1 with Spray A is characterized by a flame structure very different to that of a diffusion flame. It is characterized by large cool flame region followed by a short hightemperature zone. On the other hand, the combustion of OMEX with both nozzles and OME1 with Spray D show more similarities with a diffusion flame structure. The stoichiometry of the fuel and the equivalence ratio fields achieved strongly affect the structure and latter evolution of the flames., The research leading to these results has received funding from the European Union?s Horizon 2020 Programme, grant agreement n ? 828947, and from the Mexican Department of Energy, CONACYT- SENER Hidrocarburos grant agreement n ? B-S-69926. The authors, also, gratefully acknowledge Omar Huerta for his laboratory work on the constant-pressure combustion vessel maintenance, operation, and control.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An experimental study with renewable fuels using ECN Spray A and D nozzles

  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
  • Micó, Carlos|||0000-0001-5787-6212
  • Garcia-Carrero, Alba Andreina
[EN] The decarbonization process of the automotive industry and the road transport sector has raised the interest on the development of cleaner fuels. A proper characterization of their properties and behavior under different operating conditions is mandatory to achieve an effective implementation in commercial engines. With this objective, the current work presents a comparison of two injectors from the Engine Combustion Network (ECN), namely Spray A and Spray D injectors, in terms of spray characteristics and combustion behavior for different fuels: diesel, dodecane, Hydrotreated Vegetable Oil (HVO), and two types of oxymethylene ethers (OME1 and OME x ). The aim is to analyze how differences in nozzle geometry affect the behavior of different types of fuels. The experiments were carried out in a High Temperature and High Pressure test rig and operating conditions were chosen following ECN guidelines. Visualization techniques such as high speed schlieren imaging, OH* chemiluminescence and diffused back illumination were implemented to analyze the differences in liquid length, vapor penetration, auto ignition, flame lift-off length, and soot formation for both nozzles. In general, results showed the same trend for all the fuels tested: longer liquid length and faster vapor penetration for Spray D, as well as higher ignition delay and longer lift-off length. However, it was found that these parameters were less sensitive to the nozzle diameter for the oxygenated fuels tested. Furthermore, a different trend was observed for OME1, in terms of ignition behavior, in comparison to the other fuels. In terms of soot production, the Spray D nozzle increases its formation with the non-oxygenated fuels. In contrast, no soot was observed with the oxygenated ones under any operating conditions., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge that this research work has been partly funded by the European Union's Horizon 2020 Programme, grant agreement no. 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement no. B-S-69926 and by Universitat Politecnica de Valencia through the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-18). Part of the equipment used in this work was funded by FEDER and GVA through contract IDIFEDER/2018/037.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis de maestría (MasterThesis)

Structural Study of the Diffusive Flame of Conventional and Synthetic Fuels by Analysis of the Radiation Emitted during the Combustion Process

  • Tejada-Magraner, Francisco José|||0000-0001-6851-5084
[ES] La situación social y medioambiental hace que la legislación que regula la emisión de contaminantes sea cada vez más restrictiva, sobre todo en el campo de la automoción, lo que obliga a investigar alternativas al funcionamiento tradicional de estos motores. Hacer que funcionen con energías renovables, modificar la geometría o el modo de operación del motor son algunos de los campos de investigación. El objetivo de este trabajo de final de máster es estudiar y comparar la estructura de la llama difusiva de una serie de combustibles, tanto convencionales como es el diésel, como otro tipo de combustibles sintéticos (OMEX, OME1 y HVO). Este estudio se realizará en dos instalaciones distintas. La primera de ellas es una instalación de alta presión y temperatura en la cual la combustión no se ve perturbada por ninguna interacción entre las paredes (combustión libre). La segunda instalación es un motor óptico el cual se ha monocilindrado. En esta instalación se pueden simular condiciones de trabajo más realistas y la combustión se ve afectada por la dinámica del motor. En la instalación de alta presión y temperatura se realizará un estudio de la combustión generada por los combustibles, dodecano y oxymethylene dimethyl ether (OMEX) bajo las condiciones del Spray A del Engine Combustion Network (ECN). Esta instalación permite la posibilidad de trabajar a presión constante y controlar la concentración de oxígeno. Además, posee una serie de ventanas que proporcionan un gran acceso óptico para poder visualizar de forma óptima el proceso de combustión. El análisis de la estructura de la llama se realizará a través de la medida de la distribución espacial del formaldehido y de los radicales OH en ella, usando la técnica de fluorescencia inducida por un haz plano láser (PLIF). Para completar el análisis, esta información se combinará junto con las imágenes de la radiación de quimioluminiscencia del OH* que pertenece a la región UV. Las moléculas de formaldehido se excitan a través del tercer armónico de un láser de estado sólido, Nd:YAG (355-nm), mientras que los radicales OH se excitan a una longitud de onda de 281.00-nm de un láser de colorante, el cual consta de un láser de estado sólido Nd:YAG acoplado a un sistema óptico más complejo en el que se hace circular un colorante, lo que permite poder operar en un rango de longitudes de onda más específico. En ambos casos, el haz láser se transformará en un haz plano con el objetivo de producir la excitación en el plano axial de la llama. La radiación de fluorescencia emitida se registrará mediante la utilización de una cámara intensificada (ICCD) con los filtros apropiados. Consecuentemente, se obtendrán mapas bidimensionales en el plano axial de la llama a distintos instantes temporales después del inicio de inyección (ASOI). La señal de ambas especies químicas puede ser comparada, con el objetivo de analizar la distribución espacial y su interacción. La segunda parte del estudio se basa en analizar, para esos mismos combustibles, la estructura de la llama en un motor óptico mono cilíndrico. En este caso se realizará una serie de mezclas entre el OMEX y el OME1 con el diésel y el HVO para observar el comportamiento de la combustión a medida que en la mezcla se aumenta el porcentaje de combustible sintético. En este caso, se implementarán dos técnicas ópticas simultáneas. Una primera técnica basada en registrar la luminosidad natural de la llama y la otra para visualizar los radicales OH* a partir de su quimioluminiscencia., [EN] Due to social awareness and increasingly restrictive measures on the pollutant emission, especially in the automotive field, it is necessary to investigate alternatives to the traditional operation of these engines. To make them work with renewable energies, modifying the geometry or the operation mode of the engine are some of the research fields. The objective of this master's final project is the study and compare the diffusive flame structure of a series of fuels, both conventional such as diesel, and other types of synthetic fuels (OMEX, OME1 and HVO). This study will be carried out in two different facilities. First one, high pressure and high temperature facility in which the combustion is not disturbed by any interaction between the walls (free combustion). Then, single cylinder optical engine to simulate more realistic working conditions and combustion is affected by engine dynamics. On one hand, a comparison of the flame structure for two different fuels, dodecane and oxymethylene dimethyl ether (OMEX), will be performed under condition of Spray A of the Engine Combustion Network (ECN). The experiments will be carried out in a constant pressure vessel with wide optical access, at high pressure and temperature and controlled oxygen concentration. The flame structure analysis will be performed by measuring the formaldehyde molecules and OH radical distributions using planar Laser-Induced Fluorescence (PLIF) technique. To complement the analysis, this information will be combined with that obtained with high-speed imaging of OH* chemiluminescence radiation in the UV. Formaldehyde molecules are excited with the 355-nm radiation from the third harmonic of a Nd:YAG laser, whilst OH is excited with a wavelength of 281.00-nm from a dye laser (Nd:YAG laser coupled to complex optical system to operate in a specific range of wavelengths). In both cases, the beam will be transformed into a laser sheet to excite an axial flame plane and the fluorescence radiation will be collected with an intensified camera (ICCD) and proper filtering. Consequently, two-dimensional maps in the axial flame plane will be obtained at different instants after the start of injection (ASOI). Signal from both formaldehyde and OH chemical species can be compared, to analyse spatial distribution and interaction. The second part of the study is based on analysing, for those same fuels, the structure of the flame in a single cylinder optical engine. In this case, a series of mixtures will be made between OMEX and OME1 with diesel and HVO to see the behaviour of combustion as the percentage of synthetic fuel increased in the mixture. In this case, two simultaneous optical techniques will be implemented. A first technique based on recording the natural luminosity of the flame and the other to visualize the OH* radicals from their chemiluminescence., The research leading to these results has received funding from the European Union's Horizon 2020 Programme, grant agreement n° 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n° B-S-69926. Part of the equipment used in this work was funded by FEDER and GVA through contract IDIFEDER/2018/037.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental Study of the Effect of Hydrotreated Vegetable Oil and Oxymethylene Ethers on Main Spray and Combustion Characteristics under Engine Combustion Network Spray A Conditions

  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
  • Micó, Carlos|||0000-0001-5787-6212
  • Garcia-Carrero, Alba Andreina
  • Gómez, Arantzazu
[EN] Featured Application This work contributes to the understanding of the macroscopic characteristics of the spray as well as to the evolution of the combustion process for alternative fuels. All these fuels have been studied under the same operating conditions than diesel therefore the comparison can be made directly, leaving in evidence that some fuels can achieve a similar behavior to diesel in terms of auto ignition but avoiding one of the biggest disadvantages of diesel such as the soot formation. Moreover, the quantification of characteristic parameters such as ignition delay, liquid length, vapor penetration and flame lift-off length represent the most important data to adjust and subsequently validate the computational models that simulate the spray evolution and combustion development of these alternative fuels inside the combustion chamber. The stringent emission regulations have motivated the development of cleaner fuels as diesel surrogates. However, their different physical-chemical properties make the study of their behavior in compression ignition engines essential. In this sense, optical techniques are a very effective tool for determining the spray evolution and combustion characteristics occurring in the combustion chamber. In this work, quantitative parameters describing the evolution of diesel-like sprays such as liquid length, spray penetration, ignition delay, lift-off length and flame penetration as well as the soot formation were tested in a constant high pressure and high temperature installation using schlieren, OH* chemiluminescence and diffused back-illumination extinction imaging techniques. Boundary conditions such as rail pressure, chamber density and temperature were defined using guidelines from the Engine Combustion Network (ECN). Two paraffinic fuels (dodecane and a renewable hydrotreated vegetable oil (HVO)) and two oxygenated fuels (methylal identified as OME(1)and a blend of oxymethylene ethers, identified as OMEx) were tested and compared to a conventional diesel fuel used as reference. Results showed that paraffinic fuels and OME(x)sprays have similar behavior in terms of global combustion metrics. In the case of OME1, a shorter liquid length, but longer ignition delay time and flame lift-off length were observed. However, in terms of soot formation, a big difference between paraffinic and oxygenated fuels could be appreciated. While paraffinic fuels did not show any significant decrease of soot formation when compared to diesel fuel, soot formed by OME(1)and OME(x)was below the detection threshold in all tested conditions., This research has been partly funded by the European Union's Horizon 2020 Programme through the ENERXICO project, grant agreement no 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement no B-S-69926 and by Universitat Politecnica de Valencia through the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-18).
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

DualSPHysics: from fluid dynamics to multiphysics problems

  • Domínguez Alonso, José Manuel
  • Fourtakas, G.
  • Altomare, C.
  • Canelas, R. B.
  • Tafuni, A.
  • García Feal, Orlando
  • Martinez Estevez, Iván
  • Mokos, A.
  • Vacondio, R.
  • Cabrera Crespo, Alejandro Jacobo
  • Rogers, B. D.
  • Stansby, P. K.
  • Gómez Gesteira, Ramon
DualSPHysics is a weakly compressible smoothed particle hydrodynamics (SPH) Navier–Stokes solver initially conceived to deal with coastal engineering problems, especially those related to wave impact with coastal structures. Since the first release back in 2011, DualSPHysics has shown to be robust and accurate for simulating extreme wave events along with a continuous improvement in efficiency thanks to the exploitation of hardware such as graphics processing units for scientific computing or the coupling with wave propagating models such as SWASH and OceanWave3D. Numerous additional functionalities have also been included in the DualSPHysics package over the last few years which allow the simulation of fluid-driven objects. The use of the discrete element method has allowed the solver to simulate the interaction among different bodies (sliding rocks, for example), which provides a unique tool to analyse debris flows. In addition, the recent coupling with other solvers like Project Chrono or MoorDyn has been a milestone in the development of the solver. Project Chrono allows the simulation of articulated structures with joints, hinges, sliders and springs and MoorDyn allows simulating moored structures. Both functionalities make DualSPHysics especially suited for the simulation of offshore energy harvesting devices. Lately, the present state of maturity of the solver goes beyond single-phase simulations, allowing multi-phase simulations with gas–liquid and a combination of Newtonian and non-Newtonian models expanding further the capabilities and range of applications for the DualSPHysics solver. These advances and functionalities make DualSPHysics an advanced meshless solver with emphasis on free-surface flow modelling., Ministerio de Economía, Industria y Competitividad | Ref. ENE2016-75074-C2-1-R, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017-32592, Xunta de Galicia | Ref. ED431C 2017/64
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

DualSPHysics: from fluid dynamics to multiphysics problems

  • Domínguez, J. M.
  • García-Feal, Orlando
[Abstract:] DualSPHysics is a weakly compressible smoothed particle hydrodynamics (SPH) Navier–Stokes solver initially conceived to deal with coastal engineering problems, especially those related to wave impact with coastal structures. Since the first release back in 2011, DualSPHysics has shown to be robust and accurate for simulating extreme wave events along with a continuous improvement in efficiency thanks to the exploitation of hardware such as graphics processing units for scientific computing or the coupling with wave propagating models such as SWASH and OceanWave3D. Numerous additional functionalities have also been included in the DualSPHysics package over the last few years which allow the simulation of fluid-driven objects. The use of the discrete element method has allowed the solver to simulate the interaction among different bodies (sliding rocks, for example), which provides a unique tool to analyse debris flows. In addition, the recent coupling with other solvers like Project Chrono or MoorDyn has been a milestone in the development of the solver. Project Chrono allows the simulation of articulated structures with joints, hinges, sliders and springs and MoorDyn allows simulating moored structures. Both functionalities make DualSPHysics especially suited for the simulation of offshore energy harvesting devices. Lately, the present state of maturity of the solver goes beyond single-phase simulations, allowing multi-phase simulations with gas–liquid and a combination of Newtonian and non-Newtonian models expanding further the capabilities and range of applications for the DualSPHysics solver. These advances and functionalities make DualSPHysics an advanced meshless solver with emphasis on free-surface flow modelling., This work was partially financed by the Ministry of Economy and Competitiveness of the Government of Spain under project “WELCOME ENE2016-75074-C2-1-R” and financed by Xunta de Galicia (Spain) under project ED431C 2017/64 ″Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas (Grupos de Referencia Competitiva)" co-funded by European Regional Development Fund (ERDF). We are grateful for funding from the European Union Horizon 2020 programme under the ENERXICO Project, Grant Agreement No. 828947 and the Mexican CONACYT- SENER Hidrocarburos Grant Agreement No. B-S-69926. Dr. J. M. Domínguez acknowledges funding from Spanish government under the program “Juan de la Cierva-incorporación 2017” (IJCI-2017-32592). Dr. C. Altomare acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No.: 792370., Xunta de Galicia; ED431C 2017/64, México. CONACYT- SENER Hidrocarburos; B-S-69926
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Land CSEM Simulations and Experimental Test Using Metallic Casing in a Geothermal Exploration Context: Vallès Basin (NE Spain) Case Study

  • Castillo Reyes, Octavio
  • Queralt i Capdevila, Pilar
  • Marcuello Pascual, Alejandro
  • Ledo Fernández, Juanjo
Controlled-source electromagnetic (CSEM) measurements are complementary data for magnetotelluric (MT) characterization although its methodology on land is not sufficiently developed and tested as in marine environments. Acquiring expertise in CSEM is crucial for surveys in places where MT cannot be performed due to high levels of cultural noise. To acquire that expertise, we perform CSEM experiments in the Vallès fault [Northeast (NE), Spain], where MT results have been satisfactory and allow us to verify the CSEM results. The Vallès basin is relevant for potential heat generation because of the presence of several geothermal anomalies and its nearby location in urban areas. In this article, we present the experimental setup for that region, a 2-D joint MT+CSEM inverse model, several 3-D CSEM simulations in the presence of metallic casing, and its comparison with real data measurements. We employ a parallel and high-order vector finite element algorithm to discretize the governing equations. By using an adapted meshing strategy, different scenarios are simulated to study the influence of the source position/direction and the conductivity model in a metallic casing presence. An excellent agreement between the simulated data and analytical/real field data demonstrates the feasibility of study metallic structures in realistic configurations. Our numerical results confirm that metallic casing strongly influences electromagnetic (EM) responses, making surface measurements more sensitive to resistivity variations near the metallic structure. It could be beneficial getting higher signal-to-noise ratios and sensitivity to deep targets. However, such a casing effect depends on the input model (e.g., conductivity contrasts, frequency, and geometry).
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Land CSEM simulations and experimental test using metallic casing in a geothermal exploration context: Vallès Basin (NE Spain) case study

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • Queralt Capdevila, Pilar
  • Marcuello Pascual, Alex
  • Ledo Fernandez, Juanjo
Controlled-source electromagnetic (CSEM) measurements are complementary data for magnetotelluric (MT) characterization although its methodology on land is not sufficiently developed and tested as in marine environments. Acquiring expertise in CSEM is crucial for surveys in places where MT cannot be performed due to high levels of cultural noise. To acquire that expertise, we perform CSEM experiments in the Vallès fault [Northeast (NE), Spain], where MT results have been satisfactory and allow us to verify the CSEM results. The Vallès basin is relevant for potential heat generation because of the presence of several geothermal anomalies and its nearby location in urban areas. In this article, we present the experimental setup for that region, a 2-D joint MT+CSEM inverse model, several 3-D CSEM simulations in the presence of metallic casing, and its comparison with real data measurements. We employ a parallel and high-order vector finite element algorithm to discretize the governing equations. By using an adapted meshing strategy, different scenarios are simulated to study the influence of the source position/direction and the conductivity model in a metallic casing presence. An excellent agreement between the simulated data and analytical/real field data demonstrates the feasibility of study metallic structures in realistic configurations. Our numerical results confirm that metallic casing strongly influences electromagnetic (EM) responses, making surface measurements more sensitive to resistivity variations near the metallic structure. It could be beneficial getting higher signal-to-noise ratios and sensitivity to deep targets. However, such a casing effect depends on the input model (e.g., conductivity contrasts, frequency, and geometry)., This work was been developed in the frame of GEOURBAN project (PCI2018-092943 and PCI2018-093186). This work has received also partial funding from the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement N777778. Also, the research leading to these results has received funding from the European Union's Horizon 2020 programme, grant agreement N828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement N B-S-69926. Furthermore, this project has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French-Spanish-Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favouring sustainable territorial development. The authors would like to thank the Editors-in-Chief and to both reviewers for their valuable comments and suggestions that helped to improve the manuscript’s quality. This work benefitted from the valuable suggestions, comments, and proofreading of Dr. Josep de la Puente (BSC)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Alternating direction implicit time integrations for finite difference acoustic wave propagation: parallelization and convergence

  • Otero Calviño, Beatriz|||0000-0002-9194-559X
  • Rojas, Otilio
  • Moya, Ferrán
  • Castillo, José
This work studies the parallelization and empirical convergence of two finite difference acoustic wave propagation methods on 2-D rectangular grids, that use the same alternating direction implicit (ADI) time integration. This ADI integration is based on a second-order implicit Crank-Nicolson temporal discretization that is factored out by a Peaceman-Rachford decomposition of the time and space equation terms. In space, these methods highly diverge and apply different fourth-order accurate differentiation techniques. The first method uses compact finite differences (CFD) on nodal meshes that requires solving tridiagonal linear systems along each grid line, while the second one employs staggered-grid mimetic finite differences (MFD). For each method, we implement three parallel versions: (i) a multithreaded code in Octave, (ii) a C++ code that exploits OpenMP loop parallelization, and (iii) a CUDA kernel for a NVIDIA GTX 960 Maxwell card. In these implementations, the main source of parallelism is the simultaneous ADI updating of each wave field matrix, either column-wise or row-wise, according to the differentiation direction. In our numerical applications, the highest performances are displayed by the CFD and MFD CUDA codes that achieve speedups of 7.21x and 15.81x, respectively, relative to their C++ sequential counterparts with optimal compilation flags. Our test cases also allow to assess the numerical convergence and accuracy of both methods. In a problem with exact harmonic solution, both methods exhibit convergence rates close to 4 and the MDF accuracy is practically higher. Alternatively, both convergences decay to second order on smooth problems with severe gradients at boundaries, and the MDF rates degrade in highly-resolved grids leading to larger inaccuracies. This transition of empirical convergences agrees with the nominal truncation errors in space and time., First author was partially supported by the Generalitat de Catalunya under agreement 2017-SGR-962 and the RIS3CAT DRAC project (001-P-001723). The research leading to these results has received funding from the European Union’s Horizon 2020 Programme, grant agreement No. 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement No. B-S-69926. This project has also received funding from the European Union’s Horizon 2020research and innovation programme under the Marie Sklodowska-Curie grant agreement No 777778 (MATHROCKS). O. Rojas also thank the European Union’s Horizon 2020 Programme under the ChEESE Project, grant agreement no. 823844., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Assessment of chemistry reduction in high-pressure spray flames of oxymethylene ethers using large-eddy simulations

  • Mira Martínez, Daniel
  • Surapaneni, Anurag
  • Pérez, Eduardo
  • Both, Ambrus|||0000-0002-5267-204X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Houzeaux, Guillaume|||0000-0002-2592-1426
This study is focused on the numerical investigation of reduced chemical schemes for high pressure spray flames of oxymethylene ethers (OMEx). A reduced mechanism using Path Flux Analysis (PFA) technique is tested using an a priori and a posteriori evaluation under the ECN Spray A nominal conditions. The global flame metrics for spray A along with the flame shape are well reproduced by the reduced mechanism, which encourages its use for practical applications., The research leading to these results has received funding through the ENERXICO project from the European Union’s Horizon 2020 Programme, grant agreement n  828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n  B-S-69926 and the Spanish Ministry of Economy and Competitiveness in the frame of the CHEST project (TRA2017-89139-C2-2- R). The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (IM- 2021-1-0014, IM-2020-3-0029, IM-2020-2-0023,IM- 2020-1-0013)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

3D magnetotelluric modeling using high-order tetrahedral Nédélec elements on massively parallel computing platforms

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • Modesto Galende, David|||0000-0001-9540-8815
  • Queralt Capdevila, Pilar
  • Marcuello Pascual, Alex
  • Ledo Fernández, Juan José
  • Amor Martín, Adrián
  • de la Puente, Josep
  • García-Castillo, Luis Emilio
We present a routine for 3D magnetotelluric (MT) modeling based upon high-order edge finite element method (HEFEM), tailored and unstructured tetrahedral meshes, and high-performance computing (HPC). This imple- mentation extends the PETGEM modeller capabilities, initially developed for active-source electromagnetic methods in frequency-domain. We assess the accuracy, robustness, and performance of the code using a set of reference models developed by the MT community in well-known reported workshops. The scale and geological properties of these 3D MT setups are challenging, making them ideal for addressing a rigorous validation. Our numerical assessment proves that this new algorithm can produce the expected solutions for arbitrarily 3D MT models. Also, our extensive experimental results reveal four main insights: (1) high-order discretizations in conjunction with tailored meshes can offer excellent accuracy; (2) a rigorous mesh design based on the skin-depth principle can be beneficial for the solution of the 3D MT problem in terms of numerical accuracy and run-time; (3) high-order polynomial basis functions achieve better speed-up and parallel efficiency ratios than low-order polynomial basis functions on cutting-edge HPC platforms; (4) a triple helix approach based on HEFEM, tailored meshes, and HPC can be extremely competitive for the solution of realistic and complex 3D MT models and geophysical electromagnetics in general., This project has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain–France– Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French–Spanish–Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favoring sustainable territorial development. BSC authors received funding from the European Union’s Horizon 2020 programme, grant agreement N◦828947 and N◦777778, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement N◦B-S-69926., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Towards an open-source landscape for 3-D CSEM modelling

  • Werthmüller, Dieter
  • Rochlitz, Raphael
  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • Heagy, Lindsey
Large-scale modelling of 3-D controlled-source electromagnetic (CSEM) surveys used to be feasible only for large companies and research consortia. This has changed over the last few years, and today there exists a selection of different open-source codes available to everyone. Using four different codes in the Python ecosystem, we perform simulations for increasingly complex models in a shallow marine setting. We first verify the computed fields with semi-analytical solutions for a simple layered model. Then we validate the responses of a more complex block model by comparing results obtained from each code. Finally, we compare the responses of a real-world model with results from the industry. On the one hand, these validations show that the open-source codes are able to compute comparable CSEM responses for challenging, large-scale models. On the other hand, they show many general and method-dependent problems that need to be faced for obtaining accurate results. Our comparison includes finite-element and finite-volume codes using structured rectilinear and octree meshes as well as unstructured tetrahedral meshes. Accurate responses can be obtained independently of the chosen method and the chosen mesh type. The runtime and memory requirements vary greatly based on the choice of iterative or direct solvers. However, we have found that much more time was spent on designing the mesh and setting up the simulations than running the actual computation. The challenging task is, irrespective of the chosen code, to appropriately discretize the model. We provide three models, each with their corresponding discretization and responses of four codes, which can be used for validation of new and existing codes. The collaboration of four code maintainers trying to achieve the same task brought in the end all four codes a significant step further. This includes improved meshing and interpolation capabilities, resulting in shorter runtimes for the same accuracy. We hope that these results may be useful for the CSEM community at large and that we can build over time a suite of benchmarks that will help to increase the confidence in existing and new 3-D CSEM codes., We would like to thank Bane Sullivan for plotting of tetrahedra meshes in matplotlib through PyVista, Seogi Kang for the input and octree mesh design for the SimPEGlayer and block models and Joseph Capriotti for the octree mesh implementation and volume averaging in SimPEG. We would also like to thank Paulo Menezes for the help and explanations with regard to the Marlim R3D model and corresponding CSEM data, and for making their actual computation model available under an open-source license. We would further like to thank the editor Ute Weckmann and assistant editor Fern Story as well as the reviewers Colin Farquharson and Rune Mittet for many helpful comments, which improved this manuscript considerably. The work of DW was conducted within the Gitaro.JIM project funded through MarTERA, a European Union’s Horizon 2020 Framework Programme, grant agreement No. 728053. The development of custEM by RR as part of the DESMEX/DESMEX II projects was funded by the Germany Ministry for Education and Research (BMBF) in the framework of the research and development program Fona-r4 under grants 033R130D/033R130DN. The work of OC-R has received funding from the European Union’s Horizon 2020 Framework Programme under the Marie Sklodowska-Curie grant agreement No. 777778. Further, the development of PETGEM has received funding from the European Union’s Horizon 2020 Framework Programme, grant agreement No. 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement No. B-S-69926. Furthermore, OC-R has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French–Spanish–Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favouring sustainable territorial development. The work of LH received funding from the National Science Foundation EarthCube program under award 1928406
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

The ALEX17 diurnal cycles in complex terrain benchmark

  • Sanz Rodrigo, Javier
  • Santos, Pedro
  • Chávez Arroyo, R
  • Avila, Matias
  • Cavar, Dalibor
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Owen, Herbert
  • Li, R
  • Tromeur, Eric
The NEWA ALEX17 experiment was conducted with the objective of characterizing the wind conditions upstream of the Alaiz Test Site for the validation of flow models. From the intensive operational period, a case study has been selected for a Wakebench benchmark consisting of four consecutive days with relatively persistent winds from the North. The validation is centered around a 118-m mast at the Alaiz site and six additional masts located along the valley and at the lee side of a ridge delimiting a 8-km long area of interest. The benchmark is a follow-up of the GABLS3 diurnal cycle benchmark in flat terrain to test mesoscale-to-microscale transient and steady-state modeling methodologies in the assessment of stability-dependent bin-averaged wind conditions. Meso-micro methodologies reduce the wind speed mean bias from 32%, at 3-km mesoscale, to ±5%. Beyond mean bias mitigation, these initial results demonstrate the added value of meso-micro coupling at reproducing non conventional wind conditions at the test site like high-shear low-level jets in stable conditions and negative wind shear in unstable conditions. The benchmark also discusses the challenges of each meso-micro methodology going forward., This work was carried out under the umbrella of the International Energy Agency IEA-Wind TCP Task 31 Wakebench, with the support from: MARINE2 (EU grant agreement number 731084) UPWARDS (EU grant agreement number 763990), EoCoE-II (EU grant agreements number 824158 and 828947) and the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement number B-S-69926, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

HPC geophysical electromagnetics: a synthetic VTI model with complex bathymetry

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • Puente Álvarez, Josep de la
  • Cela Espín, José M.|||0000-0002-0122-1468
We introduce a new synthetic marine model for 3D controlled-source electromagnetic method (CSEM) surveys. The proposed model includes relevant features for the electromagnetic geophysical community such as large conductivity contrast with vertical transverse isotropy and a complex bathymetry profile. In this paper, we present the experimental setup and several 3D CSEM simulations in the presence of a resistivity unit denoting a hydrocarbon reservoir. We employ a parallel and high-order vector finite element routine to perform the CSEM simulations. By using tailored meshes, several scenarios are simulated to assess the influence of the reservoir unit presence on the electromagnetic responses. Our numerical assessment confirms that resistivity unit strongly influences the amplitude and phase of the electromagnetic measurements. We investigate the code performance for the solution of fundamental frequencies on high-performance computing architectures. Here, excellent performance ratios are obtained. Our benchmark model and its modeling results are developed under an open-source scheme that promotes easy access to data and reproducible solutions., The work of O.C-R., conducted in the frame of PIXIL project, has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A SpainFrance-Andorra program (POCTEFA2014-2020). BSC authors have received funding from the European Union’s Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement N◦ 777778. Furthermore, the development of PETGEM has received funding from the European Union’s Horizon 2020 programme, grant agreement N◦ 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement N◦ B-S-69926., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Smoothed particle hydrodynamics simulations of water flow in a 90° pipe bend

  • Sigalotti, Leonardo Di G.
  • Alvarado Rodríguez, Carlos E.
  • Klapp, Jaime
  • Cela Espín, José M.|||0000-0002-0122-1468
The flow through pipe bends and elbows occurs in a wide range of applications. While many experimental data are available for such flows in the literature, their numerical simulation is less abundant. Here, we present highly-resolved simulations of laminar and turbulent water flow in a 90° pipe bend using Smoothed Particle Hydrodynamics (SPH) methods coupled to a Large-Eddy Simulation (LES) model for turbulence. Direct comparison with available experimental data is provided in terms of streamwise velocity profiles, turbulence intensity profiles and cross-sectional velocity maps at different stations upstream, inside and downstream of the pipe bend. The numerical results are in good agreement with the experimental data. In particular, maximum root-mean-square deviations from the experimental velocity profiles are always less than ~1.4%. Convergence to the experimental measurements of the turbulent fluctuations is achieved by quadrupling the resolution necessary to guarantee convergence of the velocity profiles. At such resolution, the deviations from the experimental data are ~0.8%. In addition, the cross-sectional velocity maps inside and downstream of the bend shows that the experimentally observed details of the secondary flow are also very well predicted by the numerical simulations., This research was funded by the European Union’s Horizon 2020 Programme under the ENERXICO Project grant number 828947 and under the Mexican CONACYT-SENER-Hidrocarburos grant number B-S-69926 and by CONACYT under project number 368., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Tailored meshing for parallel 3D electromagnetic modeling using high-order edge elements

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • Amor Martin, Adrian
  • Botella, Arnaud
  • Anquez, Pierre
  • García Castillo, Luis Emilio
We present numerical experiments for geophysics electromagnetic (EM) modeling based upon high-order edge elements and supervised h+p refinement approaches on massively parallel computers. Our high-order h+p refinement strategy is based on and extends the PETGEM code. We focus on the performance study in terms of accuracy, convergence rate, and computational effort to solve real-life 3D setups based on synthetic and experimental data for energy reservoir characterization. These test cases show variable resolution discretization needs and realistic physical parameters. In general, our numerical results are consistent theoretically. The use of h-adapted meshes was efficient to achieve a certain accuracy level in the synthetic EM responses. Regarding global p-refinement, p=2 exhibits the best accuracy/performance trade-off. Selective p-refinement might offer a better compromise between accuracy and computational cost. However, for p-refinement at different entities, the best refinement scheme consists of using p=3 at the volume level with p=1 at faces and edges. Thus, p-refinement can be competitive if applied hierarchically. Nevertheless, we acknowledge that the performance of our supervised h+p refinement strategy depends on the input model (e.g., conductivity, frequency, domain decomposition strategy, among others). Whatever the chosen configuration, our numerical results provide an in-depth understanding of EM modeling’s pros and cons when supervised h+p refinement schemes are applied., The work of O.C-R. has received funding from ”HPC Technology Innovation Lab”, a Barcelona Supercomputing Center and Huawei research cooperation agreement (2020). O.C-R. has been also 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French-Spanish-Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favoring sustainable territorial development. Also, O.C-R. has received funding from the European Union’s Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement N 777778. Furthermore, the development of PETGEM has received funding from the European Union’s Horizon 2020 programme, grant agreement N 828947, and from the Mexican Department of Energy , CONACYT-SENER Hidrocarburos grant agreement N B-S-69926. Finally, the authors would also like to thank the support of the Ministerio de Educación Ciencia (Spain) under Projects TEC2016-80386-P. This work benefited from the valuable suggestions, comments and proofreading of Dr. Otilio Rojas (BSC). All authors approved the version of the manuscript to be published, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A hybrid meshing framework adapted to the topography to simulate atmospheric boundary layer flows

  • Gargallo Peiró, Abel|||0000-0003-3742-2197
  • Avila, Matias
  • Folch, Arnau|||0000-0002-0677-6366
A new topography adapted mesh generation framework tailored to simulate Atmospheric Boundary Layer (ABL) flows on complex terrains is presented. The mesher is fully automatic given: the maximum and minimum surface mesh size, and the mesh size at the top of the ABL. The following contributions to the meshing workflow for ABL flow simulation are performed. First, we present a smooth topography modeling to query first and second-order geometry derivatives. Second, we propose a new adaptive meshing procedure to discretize the topography based on two different metrics. Third, we present the ABL mesher, featuring both prisms and tetrahedra. We extrude the triangles of the adapted surface mesh, generating prisms that reproduce the Surface Boundary Layer. Then, the rest of the domain is meshed with an unstructured tetrahedral mesh. In addition, we detail a hybrid quality optimization approach for both the surface and volume meshers, analyzing its impact on the solver for high-complexity terrains. We analyze the convergence of the triangle adaptive approach, obtaining quadratic convergence to the geometry and reducing to one-half the error for the same amount of degrees of freedom than without adaptivity and optimization. We also study the mesh convergence of our Reynolds-averaged Navier–Stokes (RANS) solver, obtaining quadratic mesh convergence to the solution, and using a 30% of the degrees of freedom while reducing a 20% of the error of standard semi-structured approaches. Finally, we present the generated meshes and the simulation results for a complete complex topographic scenario., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Machine learning as a seismic prior velocity model building method for full-waveform inversion: a case study from Colombia

  • Iturrarán-Viveros, Ursula
  • Muñoz-García, Andrés M.
  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • Shukla, Khemraj
We use machine learning algorithms (artificial neural networks, ANNs) to estimate petrophysical models at seismic scale combining well-log information, seismic data and seismic attributes. The resulting petrophysical images are the prior inputs in the process of full-waveform inversion (FWI). We calculate seismic attributes from a stacked reflected 2-D seismic section and then train ANNs to approximate the following petrophysical parameters: P-wave velocity (Vp), density (ρ) and volume of clay (Vclay). We extend the use of the Vclay by constraining it with the well lithology and we establish two classes: sands and shales. Consequently, machine learning allows us to build an initial estimate of the earth property model (Vp), which is iteratively refined to produce a synthetic seismogram that matches the observed seismic data. We apply the 1-D Kennett method as a forward modeling tool to create synthetic data with the images of Vp, ρ and the thickness of layers (sands or shales) obtained with the ANNs. A nonlinear least-squares inversion algorithm minimizes the residual (or misfit) between observed and synthetic full-waveform data, which improves the Vp resolution. In order to show the advantage of using the ANN velocity model as the initial velocity model for the inversion, we compare the results obtained with the ANNs and two other initial velocity models. One of these alternative initial velocity models is computed via P-wave impedance, and the other is achieved by velocity semblance analysis: root-mean-square velocity (RMS). The results are in good agreement when we use ρ and Vp obtained by ANNs. However, the results are poor and the synthetic data do not match the real acquired data when using the semblance velocity model and the ρ from the well log (constant for the entire 2-D section). Nevertheless, the results improve when including ρ, the layered structure driven by the Vclay (both obtained with ANNs) and the semblance velocity model. When doing inversion starting with the initial Vp model estimated using the P-wave impedance, there is some gain of the final Vp with respect to the RMS initial Vp. To assess the quality of the inversion of Vp, we use the information for two available wells and compare the final Vp obtained with ANNs and the final Vp computed with the P-wave impedance. This shows the benefit of employing ANNs estimations as prior models during the inversion process to obtain a final Vp that is in agreement with the geology and with the seismic and well-log data. To illustrate the computation of the final velocity model via FWI, we provide an algorithm with the detailed steps and its corresponding GitHub code., We are grateful for the kind comments and suggestions from two anonymous reviewers. We thank Ecopetrol S.A. within the research program 0266-2013 Colciencias Ecopetrol, for providing the well and seismic data used in this research. We would like to thank J.O. Parra for fruitful discussion regarding the inversion using nonlinear least-squares. This work was partially supported by CONACYT México under Ciencia de Frontera project number 6655, PROINNOVA projects 251910, 241763; DGAPA-UNAM project number IN107720; funding from the European Union’s Horizon 2020 Programme under the ENERXICO Project (www.enerxico-project.eu), Grant agreement no. 828947; CONACYT-SENER-Hidrocarburos Grant agreement B-S-69926. This project has also received funding from the European Union’s Horizon 2020 programme under the Marie Sklodowska-Curie Grant agreement no. 777778. Part of this work was done while one of the authors (U.I-V.) was on a sabbatical leave from the National University of México at the Barcelona Super Computing Center in Barcelona Spain as a visiting researcher with support from DGAPA-UNAM. Furthermore, O.C.-R. has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French-Spanish-Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favoring sustainable territorial development., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

HPC geophysical electromagnetics: a synthetic VTI model with complex bathymetry

  • Castillo Reyes, Octavio
  • Puente Álvarez, Josep de la
  • Cela Espín, José M.
We introduce a new synthetic marine model for 3D controlled-source electromagnetic method (CSEM) surveys. The proposed model includes relevant features for the electromagnetic geophysical community such as large conductivity contrast with vertical transverse isotropy and a complex bathymetry profile. In this paper, we present the experimental setup and several 3D CSEM simulations in the presence of a resistivity unit denoting a hydrocarbon reservoir. We employ a parallel and high-order vector finite element routine to perform the CSEM simulations. By using tailored meshes, several scenarios are simulated to assess the influence of the reservoir unit presence on the electromagnetic responses. Our numerical assessment confirms that resistivity unit strongly influences the amplitude and phase of the electromagnetic measurements. We investigate the code performance for the solution of fundamental frequencies on high-performance computing architectures. Here, excellent performance ratios are obtained. Our benchmark model and its modeling results are developed under an open-source scheme that promotes easy access to data and reproducible solutions., The work of O.C-R., conducted in the frame of PIXIL project, has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A SpainFrance-Andorra program (POCTEFA2014-2020). BSC authors have received funding from the European Union’s Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement N◦ 777778. Furthermore, the development of PETGEM has received funding from the European Union’s Horizon 2020 programme, grant agreement N◦ 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement N◦ B-S-69926., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A hybrid meshing framework adapted to the topography to simulate atmospheric boundary layer flows

  • Gargallo Peiró, Abel
  • Avila, Matias
  • Folch, Arnau
A new topography adapted mesh generation framework tailored to simulate Atmospheric Boundary Layer (ABL) flows on complex terrains is presented. The mesher is fully automatic given: the maximum and minimum surface mesh size, and the mesh size at the top of the ABL. The following contributions to the meshing workflow for ABL flow simulation are performed. First, we present a smooth topography modeling to query first and second-order geometry derivatives. Second, we propose a new adaptive meshing procedure to discretize the topography based on two different metrics. Third, we present the ABL mesher, featuring both prisms and tetrahedra. We extrude the triangles of the adapted surface mesh, generating prisms that reproduce the Surface Boundary Layer. Then, the rest of the domain is meshed with an unstructured tetrahedral mesh. In addition, we detail a hybrid quality optimization approach for both the surface and volume meshers, analyzing its impact on the solver for high-complexity terrains. We analyze the convergence of the triangle adaptive approach, obtaining quadratic convergence to the geometry and reducing to one-half the error for the same amount of degrees of freedom than without adaptivity and optimization. We also study the mesh convergence of our Reynolds-averaged Navier–Stokes (RANS) solver, obtaining quadratic mesh convergence to the solution, and using a 30% of the degrees of freedom while reducing a 20% of the error of standard semi-structured approaches. Finally, we present the generated meshes and the simulation results for a complete complex topographic scenario., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Tailored meshing for parallel 3D electromagnetic modeling using high-order edge elements

  • Castillo Reyes, Octavio
  • Amor Martin, Adrian
  • Botella, Arnaud
  • Anquez, Pierre
  • García Castillo, Luis Emilio
We present numerical experiments for geophysics electromagnetic (EM) modeling based upon high-order edge elements and supervised h+p refinement approaches on massively parallel computers. Our high-order h+p refinement strategy is based on and extends the PETGEM code. We focus on the performance study in terms of accuracy, convergence rate, and computational effort to solve real-life 3D setups based on synthetic and experimental data for energy reservoir characterization. These test cases show variable resolution discretization needs and realistic physical parameters. In general, our numerical results are consistent theoretically. The use of h-adapted meshes was efficient to achieve a certain accuracy level in the synthetic EM responses. Regarding global p-refinement, p=2 exhibits the best accuracy/performance trade-off. Selective p-refinement might offer a better compromise between accuracy and computational cost. However, for p-refinement at different entities, the best refinement scheme consists of using p=3 at the volume level with p=1 at faces and edges. Thus, p-refinement can be competitive if applied hierarchically. Nevertheless, we acknowledge that the performance of our supervised h+p refinement strategy depends on the input model (e.g., conductivity, frequency, domain decomposition strategy, among others). Whatever the chosen configuration, our numerical results provide an in-depth understanding of EM modeling’s pros and cons when supervised h+p refinement schemes are applied., The work of O.C-R. has received funding from ”HPC Technology Innovation Lab”, a Barcelona Supercomputing Center and Huawei research cooperation agreement (2020). O.C-R. has been also 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French-Spanish-Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favoring sustainable territorial development. Also, O.C-R. has received funding from the European Union’s Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement N 777778. Furthermore, the development of PETGEM has received funding from the European Union’s Horizon 2020 programme, grant agreement N 828947, and from the Mexican Department of Energy , CONACYT-SENER Hidrocarburos grant agreement N B-S-69926. Finally, the authors would also like to thank the support of the Ministerio de Educación Ciencia (Spain) under Projects TEC2016-80386-P. This work benefited from the valuable suggestions, comments and proofreading of Dr. Otilio Rojas (BSC). All authors approved the version of the manuscript to be published, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Smoothed particle hydrodynamics simulations of water flow in a 90° pipe bend

  • Sigalotti, Leonardo Di G.
  • Alvarado Rodríguez, Carlos E.
  • Klapp, Jaime
  • Cela Espín, José M.
The flow through pipe bends and elbows occurs in a wide range of applications. While many experimental data are available for such flows in the literature, their numerical simulation is less abundant. Here, we present highly-resolved simulations of laminar and turbulent water flow in a 90° pipe bend using Smoothed Particle Hydrodynamics (SPH) methods coupled to a Large-Eddy Simulation (LES) model for turbulence. Direct comparison with available experimental data is provided in terms of streamwise velocity profiles, turbulence intensity profiles and cross-sectional velocity maps at different stations upstream, inside and downstream of the pipe bend. The numerical results are in good agreement with the experimental data. In particular, maximum root-mean-square deviations from the experimental velocity profiles are always less than ~1.4%. Convergence to the experimental measurements of the turbulent fluctuations is achieved by quadrupling the resolution necessary to guarantee convergence of the velocity profiles. At such resolution, the deviations from the experimental data are ~0.8%. In addition, the cross-sectional velocity maps inside and downstream of the bend shows that the experimentally observed details of the secondary flow are also very well predicted by the numerical simulations., This research was funded by the European Union’s Horizon 2020 Programme under the ENERXICO Project grant number 828947 and under the Mexican CONACYT-SENER-Hidrocarburos grant number B-S-69926 and by CONACYT under project number 368., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

3D magnetotelluric modeling using high-order tetrahedral Nédélec elements on massively parallel computing platforms

  • Castillo Reyes, Octavio
  • Modesto Galende, David
  • Queralt Capdevila, Pilar
  • Marcuello Pascual, Alex
  • Ledo Fernández, Juan José
  • Amor Martín, Adrián
  • de la Puente, Josep
  • García-Castillo, Luis Emilio
We present a routine for 3D magnetotelluric (MT) modeling based upon high-order edge finite element method (HEFEM), tailored and unstructured tetrahedral meshes, and high-performance computing (HPC). This imple- mentation extends the PETGEM modeller capabilities, initially developed for active-source electromagnetic methods in frequency-domain. We assess the accuracy, robustness, and performance of the code using a set of reference models developed by the MT community in well-known reported workshops. The scale and geological properties of these 3D MT setups are challenging, making them ideal for addressing a rigorous validation. Our numerical assessment proves that this new algorithm can produce the expected solutions for arbitrarily 3D MT models. Also, our extensive experimental results reveal four main insights: (1) high-order discretizations in conjunction with tailored meshes can offer excellent accuracy; (2) a rigorous mesh design based on the skin-depth principle can be beneficial for the solution of the 3D MT problem in terms of numerical accuracy and run-time; (3) high-order polynomial basis functions achieve better speed-up and parallel efficiency ratios than low-order polynomial basis functions on cutting-edge HPC platforms; (4) a triple helix approach based on HEFEM, tailored meshes, and HPC can be extremely competitive for the solution of realistic and complex 3D MT models and geophysical electromagnetics in general., This project has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain–France– Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French–Spanish–Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favoring sustainable territorial development. BSC authors received funding from the European Union’s Horizon 2020 programme, grant agreement N◦828947 and N◦777778, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement N◦B-S-69926., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Land CSEM simulations and experimental test using metallic casing in a geothermal exploration context: Vallès Basin (NE Spain) case study

  • Castillo Reyes, Octavio
  • Queralt Capdevila, Pilar
  • Marcuello Pascual, Alex
  • Ledo Fernandez, Juanjo
Controlled-source electromagnetic (CSEM) measurements are complementary data for magnetotelluric (MT) characterization although its methodology on land is not sufficiently developed and tested as in marine environments. Acquiring expertise in CSEM is crucial for surveys in places where MT cannot be performed due to high levels of cultural noise. To acquire that expertise, we perform CSEM experiments in the Vallès fault [Northeast (NE), Spain], where MT results have been satisfactory and allow us to verify the CSEM results. The Vallès basin is relevant for potential heat generation because of the presence of several geothermal anomalies and its nearby location in urban areas. In this article, we present the experimental setup for that region, a 2-D joint MT+CSEM inverse model, several 3-D CSEM simulations in the presence of metallic casing, and its comparison with real data measurements. We employ a parallel and high-order vector finite element algorithm to discretize the governing equations. By using an adapted meshing strategy, different scenarios are simulated to study the influence of the source position/direction and the conductivity model in a metallic casing presence. An excellent agreement between the simulated data and analytical/real field data demonstrates the feasibility of study metallic structures in realistic configurations. Our numerical results confirm that metallic casing strongly influences electromagnetic (EM) responses, making surface measurements more sensitive to resistivity variations near the metallic structure. It could be beneficial getting higher signal-to-noise ratios and sensitivity to deep targets. However, such a casing effect depends on the input model (e.g., conductivity contrasts, frequency, and geometry)., This work was been developed in the frame of GEOURBAN project (PCI2018-092943 and PCI2018-093186). This work has received also partial funding from the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement N777778. Also, the research leading to these results has received funding from the European Union's Horizon 2020 programme, grant agreement N828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement N B-S-69926. Furthermore, this project has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French-Spanish-Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favouring sustainable territorial development. The authors would like to thank the Editors-in-Chief and to both reviewers for their valuable comments and suggestions that helped to improve the manuscript’s quality. This work benefitted from the valuable suggestions, comments, and proofreading of Dr. Josep de la Puente (BSC)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Towards an open-source landscape for 3-D CSEM modelling

  • Werthmüller, Dieter
  • Rochlitz, Raphael
  • Castillo Reyes, Octavio
  • Heagy, Lindsey
Large-scale modelling of 3-D controlled-source electromagnetic (CSEM) surveys used to be feasible only for large companies and research consortia. This has changed over the last few years, and today there exists a selection of different open-source codes available to everyone. Using four different codes in the Python ecosystem, we perform simulations for increasingly complex models in a shallow marine setting. We first verify the computed fields with semi-analytical solutions for a simple layered model. Then we validate the responses of a more complex block model by comparing results obtained from each code. Finally, we compare the responses of a real-world model with results from the industry. On the one hand, these validations show that the open-source codes are able to compute comparable CSEM responses for challenging, large-scale models. On the other hand, they show many general and method-dependent problems that need to be faced for obtaining accurate results. Our comparison includes finite-element and finite-volume codes using structured rectilinear and octree meshes as well as unstructured tetrahedral meshes. Accurate responses can be obtained independently of the chosen method and the chosen mesh type. The runtime and memory requirements vary greatly based on the choice of iterative or direct solvers. However, we have found that much more time was spent on designing the mesh and setting up the simulations than running the actual computation. The challenging task is, irrespective of the chosen code, to appropriately discretize the model. We provide three models, each with their corresponding discretization and responses of four codes, which can be used for validation of new and existing codes. The collaboration of four code maintainers trying to achieve the same task brought in the end all four codes a significant step further. This includes improved meshing and interpolation capabilities, resulting in shorter runtimes for the same accuracy. We hope that these results may be useful for the CSEM community at large and that we can build over time a suite of benchmarks that will help to increase the confidence in existing and new 3-D CSEM codes., We would like to thank Bane Sullivan for plotting of tetrahedra meshes in matplotlib through PyVista, Seogi Kang for the input and octree mesh design for the SimPEGlayer and block models and Joseph Capriotti for the octree mesh implementation and volume averaging in SimPEG. We would also like to thank Paulo Menezes for the help and explanations with regard to the Marlim R3D model and corresponding CSEM data, and for making their actual computation model available under an open-source license. We would further like to thank the editor Ute Weckmann and assistant editor Fern Story as well as the reviewers Colin Farquharson and Rune Mittet for many helpful comments, which improved this manuscript considerably. The work of DW was conducted within the Gitaro.JIM project funded through MarTERA, a European Union’s Horizon 2020 Framework Programme, grant agreement No. 728053. The development of custEM by RR as part of the DESMEX/DESMEX II projects was funded by the Germany Ministry for Education and Research (BMBF) in the framework of the research and development program Fona-r4 under grants 033R130D/033R130DN. The work of OC-R has received funding from the European Union’s Horizon 2020 Framework Programme under the Marie Sklodowska-Curie grant agreement No. 777778. Further, the development of PETGEM has received funding from the European Union’s Horizon 2020 Framework Programme, grant agreement No. 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement No. B-S-69926. Furthermore, OC-R has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French–Spanish–Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favouring sustainable territorial development. The work of LH received funding from the National Science Foundation EarthCube program under award 1928406, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The ALEX17 diurnal cycles in complex terrain benchmark

  • Sanz Rodrigo, Javier
  • Santos, Pedro
  • Chávez Arroyo, R
  • Avila, Matias
  • Cavar, Dalibor
  • Lehmkuhl Barba, Oriol
  • Owen, Herbert
  • Li, R
  • Tromeur, Eric
The NEWA ALEX17 experiment was conducted with the objective of characterizing the wind conditions upstream of the Alaiz Test Site for the validation of flow models. From the intensive operational period, a case study has been selected for a Wakebench benchmark consisting of four consecutive days with relatively persistent winds from the North. The validation is centered around a 118-m mast at the Alaiz site and six additional masts located along the valley and at the lee side of a ridge delimiting a 8-km long area of interest. The benchmark is a follow-up of the GABLS3 diurnal cycle benchmark in flat terrain to test mesoscale-to-microscale transient and steady-state modeling methodologies in the assessment of stability-dependent bin-averaged wind conditions. Meso-micro methodologies reduce the wind speed mean bias from 32%, at 3-km mesoscale, to ±5%. Beyond mean bias mitigation, these initial results demonstrate the added value of meso-micro coupling at reproducing non conventional wind conditions at the test site like high-shear low-level jets in stable conditions and negative wind shear in unstable conditions. The benchmark also discusses the challenges of each meso-micro methodology going forward., This work was carried out under the umbrella of the International Energy Agency IEA-Wind TCP Task 31 Wakebench, with the support from: MARINE2 (EU grant agreement number 731084) UPWARDS (EU grant agreement number 763990), EoCoE-II (EU grant agreements number 824158 and 828947) and the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement number B-S-69926, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Alternating direction implicit time integrations for finite difference acoustic wave propagation: parallelization and convergence

  • Otero Calviño, Beatriz
  • Rojas, Otilio
  • Moya, Ferrán
  • Castillo, José
This work studies the parallelization and empirical convergence of two finite difference acoustic wave propagation methods on 2-D rectangular grids, that use the same alternating direction implicit (ADI) time integration. This ADI integration is based on a second-order implicit Crank-Nicolson temporal discretization that is factored out by a Peaceman-Rachford decomposition of the time and space equation terms. In space, these methods highly diverge and apply different fourth-order accurate differentiation techniques. The first method uses compact finite differences (CFD) on nodal meshes that requires solving tridiagonal linear systems along each grid line, while the second one employs staggered-grid mimetic finite differences (MFD). For each method, we implement three parallel versions: (i) a multithreaded code in Octave, (ii) a C++ code that exploits OpenMP loop parallelization, and (iii) a CUDA kernel for a NVIDIA GTX 960 Maxwell card. In these implementations, the main source of parallelism is the simultaneous ADI updating of each wave field matrix, either column-wise or row-wise, according to the differentiation direction. In our numerical applications, the highest performances are displayed by the CFD and MFD CUDA codes that achieve speedups of 7.21x and 15.81x, respectively, relative to their C++ sequential counterparts with optimal compilation flags. Our test cases also allow to assess the numerical convergence and accuracy of both methods. In a problem with exact harmonic solution, both methods exhibit convergence rates close to 4 and the MDF accuracy is practically higher. Alternatively, both convergences decay to second order on smooth problems with severe gradients at boundaries, and the MDF rates degrade in highly-resolved grids leading to larger inaccuracies. This transition of empirical convergences agrees with the nominal truncation errors in space and time., First author was partially supported by the Generalitat de Catalunya under agreement 2017-SGR-962 and the RIS3CAT DRAC project (001-P-001723). The research leading to these results has received funding from the European Union’s Horizon 2020 Programme, grant agreement No. 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement No. B-S-69926. This project has also received funding from the European Union’s Horizon 2020research and innovation programme under the Marie Sklodowska-Curie grant agreement No 777778 (MATHROCKS). O. Rojas also thank the European Union’s Horizon 2020 Programme under the ChEESE Project, grant agreement no. 823844., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Assessment of chemistry reduction in high-pressure spray flames of oxymethylene ethers using large-eddy simulations

  • Mira Martínez, Daniel
  • Surapaneni, Anurag
  • Pérez, Eduardo
  • Both, Ambrus
  • Lehmkuhl Barba, Oriol
  • Houzeaux, Guillaume
This study is focused on the numerical investigation of reduced chemical schemes for high pressure spray flames of oxymethylene ethers (OMEx). A reduced mechanism using Path Flux Analysis (PFA) technique is tested using an a priori and a posteriori evaluation under the ECN Spray A nominal conditions. The global flame metrics for spray A along with the flame shape are well reproduced by the reduced mechanism, which encourages its use for practical applications., The research leading to these results has received funding through the ENERXICO project from the European Union’s Horizon 2020 Programme, grant agreement n  828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n  B-S-69926 and the Spanish Ministry of Economy and Competitiveness in the frame of the CHEST project (TRA2017-89139-C2-2- R). The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (IM- 2021-1-0014, IM-2020-3-0029, IM-2020-2-0023,IM- 2020-1-0013)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Land CSEM Simulations and Experimental Test Using Metallic Casing in a Geothermal Exploration Context: Vallès Basin (NE Spain) Case Study

  • Castillo Reyes, Octavio
  • Queralt i Capdevila, Pilar
  • Marcuello Pascual, Alejandro
  • Ledo Fernández, Juanjo
Controlled-source electromagnetic (CSEM) measurements are complementary data for magnetotelluric (MT) characterization although its methodology on land is not sufficiently developed and tested as in marine environments. Acquiring expertise in CSEM is crucial for surveys in places where MT cannot be performed due to high levels of cultural noise. To acquire that expertise, we perform CSEM experiments in the Vallès fault [Northeast (NE), Spain], where MT results have been satisfactory and allow us to verify the CSEM results. The Vallès basin is relevant for potential heat generation because of the presence of several geothermal anomalies and its nearby location in urban areas. In this article, we present the experimental setup for that region, a 2-D joint MT+CSEM inverse model, several 3-D CSEM simulations in the presence of metallic casing, and its comparison with real data measurements. We employ a parallel and high-order vector finite element algorithm to discretize the governing equations. By using an adapted meshing strategy, different scenarios are simulated to study the influence of the source position/direction and the conductivity model in a metallic casing presence. An excellent agreement between the simulated data and analytical/real field data demonstrates the feasibility of study metallic structures in realistic configurations. Our numerical results confirm that metallic casing strongly influences electromagnetic (EM) responses, making surface measurements more sensitive to resistivity variations near the metallic structure. It could be beneficial getting higher signal-to-noise ratios and sensitivity to deep targets. However, such a casing effect depends on the input model (e.g., conductivity contrasts, frequency, and geometry).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Machine learning as a seismic prior velocity model building method for full-waveform inversion: a case study from Colombia

  • Iturrarán-Viveros, Ursula
  • Muñoz-García, Andrés M.
  • Castillo Reyes, Octavio
  • Shukla, Khemraj
We use machine learning algorithms (artificial neural networks, ANNs) to estimate petrophysical models at seismic scale combining well-log information, seismic data and seismic attributes. The resulting petrophysical images are the prior inputs in the process of full-waveform inversion (FWI). We calculate seismic attributes from a stacked reflected 2-D seismic section and then train ANNs to approximate the following petrophysical parameters: P-wave velocity (Vp), density (ρ) and volume of clay (Vclay). We extend the use of the Vclay by constraining it with the well lithology and we establish two classes: sands and shales. Consequently, machine learning allows us to build an initial estimate of the earth property model (Vp), which is iteratively refined to produce a synthetic seismogram that matches the observed seismic data. We apply the 1-D Kennett method as a forward modeling tool to create synthetic data with the images of Vp, ρ and the thickness of layers (sands or shales) obtained with the ANNs. A nonlinear least-squares inversion algorithm minimizes the residual (or misfit) between observed and synthetic full-waveform data, which improves the Vp resolution. In order to show the advantage of using the ANN velocity model as the initial velocity model for the inversion, we compare the results obtained with the ANNs and two other initial velocity models. One of these alternative initial velocity models is computed via P-wave impedance, and the other is achieved by velocity semblance analysis: root-mean-square velocity (RMS). The results are in good agreement when we use ρ and Vp obtained by ANNs. However, the results are poor and the synthetic data do not match the real acquired data when using the semblance velocity model and the ρ from the well log (constant for the entire 2-D section). Nevertheless, the results improve when including ρ, the layered structure driven by the Vclay (both obtained with ANNs) and the semblance velocity model. When doing inversion starting with the initial Vp model estimated using the P-wave impedance, there is some gain of the final Vp with respect to the RMS initial Vp. To assess the quality of the inversion of Vp, we use the information for two available wells and compare the final Vp obtained with ANNs and the final Vp computed with the P-wave impedance. This shows the benefit of employing ANNs estimations as prior models during the inversion process to obtain a final Vp that is in agreement with the geology and with the seismic and well-log data. To illustrate the computation of the final velocity model via FWI, we provide an algorithm with the detailed steps and its corresponding GitHub code., We are grateful for the kind comments and suggestions from two anonymous reviewers. We thank Ecopetrol S.A. within the research program 0266-2013 Colciencias Ecopetrol, for providing the well and seismic data used in this research. We would like to thank J.O. Parra for fruitful discussion regarding the inversion using nonlinear least-squares. This work was partially supported by CONACYT México under Ciencia de Frontera project number 6655, PROINNOVA projects 251910, 241763; DGAPA-UNAM project number IN107720; funding from the European Union’s Horizon 2020 Programme under the ENERXICO Project (www.enerxico-project.eu), Grant agreement no. 828947; CONACYT-SENER-Hidrocarburos Grant agreement B-S-69926. This project has also received funding from the European Union’s Horizon 2020 programme under the Marie Sklodowska-Curie Grant agreement no. 777778. Part of this work was done while one of the authors (U.I-V.) was on a sabbatical leave from the National University of México at the Barcelona Super Computing Center in Barcelona Spain as a visiting researcher with support from DGAPA-UNAM. Furthermore, O.C.-R. has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program (POCTEFA2014-2020). POCTEFA aims to reinforce the economic and social integration of the French-Spanish-Andorran border. Its support is focused on developing economic, social and environmental cross-border activities through joint strategies favoring sustainable territorial development., Peer Reviewed, Postprint (published version)