Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

LES study on spray combustion with renewable fuels under ECN Spray-A conditions

  • Mira Martínez, Daniel
  • Pérez-Sánchez, Eduardo J.
  • Surapaneni, Anurag
  • De Leon-Ceriani, Daiana
  • Benajes, Jesús|||0000-0002-1653-9188
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
[EN] Poly-Oxymethylene Dimethyl Ethers (OMEx) are being intensively investigated because of their potentially renewable synthesis path, which make them suitable as liquid fuels for low-carbon transport applications. In the present contribution, a computational study on the difference in combustion characteristics between dodecane and OMEx-type fuels under Engine Combustion Network (ECN) Spray A conditions is reported. In particular, a blend of different OMEx fuels have been investigated and compared to dodecane, which is a more conventional diesellike fuel. The modelling framework consists of a high-fidelity LES approach together with a Eulerian-Lagrangian spray model and flamelet-based turbulent combustion model. Results indicate ignition delay time and lift-off length according to the fuel reactivity properties, with the OMEx fuel performing similarly to dodecane. Flamelet calculations show that ignition of the oxygenated fuels is in general similar to that of dodecane, but it occurs at higher mixture fraction values due to the differences in stoichiometry. One of the most relevant outcomes of the study is the important effect that the oxygenated characteristics of OMEx has on the flame structure. Results show that for OMEx the reaction front is stabilized at distances closer to the nozzle than for dodecane, and that the flame shape as well as its internal structure is clearly affected., The research leading to these results has received funding through the ENERXICO project from the European Union's Horizon 2020 Programme, grant agreement n° 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n° B-S-69926 and the Spanish Ministry of Economy and Competitiveness in the frame of the CHEST project (TRA2017-89139-C2-2-R). Furthermore, computer resources and technical assistance has been provided by the Red Espanola de Supercomputación (RES) (IM-2021-1-00214, IM-2020-3-0029, IM-2020-2-0023,IM-2020-1-0013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Experimental Study of the Fuel Effect on Diffusion Combustion and Soot Formation under Diesel Engine-Like Conditions

  • García Carrero, Alba Andreina
[ES] Las emisiones de CO2 en el sector transporte se han incrementado considerablemente durante los últimos años debido al desarrollo económico mundial. El crecimiento de las flotas de transporte, junto con otros factores, ha contribuido al desequilibrio del ciclo de carbono del planeta. Es por ello que el CO2 se considera un gas de efecto invernadero de origen antropogénico que debe ser reducido para evitar el calentamiento global. Las estrategias para reducir el CO2 en el sector transporte están enfocadas a la electrificación y al uso de combustibles neutros o de bajo impacto al ambiente. Sin embargo, una efectiva implementación de esta última requiere un profundo entendimiento de la combustión con tales combustibles. En la presente tesis doctoral, se ha caracterizado experimentalmente la combustión de diferentes tipos de combustibles, entre ellos, algunos de bajo impacto en emisiones de CO2 como lo son el Aceite Vegetal Hidrotratado (HVO) y dos éteres de oximetileno (OME1 y OMEx).Además, por su potencial en la reducción de contaminantes se han evaluado mezclas de diésel y gasolina y de HVO y Gas Licuado de Petróleo (LPG), lo que requirió adecuar el sistema de inyección para evitar la evaporación a lo largo de la línea. Todos estos combustibles y mezclas han sido inyectados con una tobera mono-orificio y han sido evaluados mediante técnicas de visualización a alta velocidad bajo diferentes condiciones termodinámicas típicas de un motor de encendido por compresión operando en condiciones de combustión a baja temperatura, en instalaciones con accesos ópticos. Se ha analizado el efecto de las propiedades físico químicas de estos combustibles y mezclas sobre los parámetros característicos de un chorro como lo son la longitud líquida y la penetración de vapor. La combustión ha sido evaluada mediante la caracterización del tiempo de retraso, de la liberación de calor y la longitud del despegue de la llama, que viene condicionada por el proceso de mezcla. Igualmente, el estudio de la formación de hollín en función de las propiedades del combustible y de las características del proceso de mezcla, representa un aporte importante de esta tesis. En adición a los beneficios en reducción de CO2 que brindan los combustibles y mezclas utilizados en este estudio, estos también redujeron la formación de hollín en la cámara de combustión, destacándose entre ellos los combustibles oxigenados, especialmente el OMEx que además de no formar hollín, fue el de mayor reactividad en todas las condiciones de operación evaluadas., [CA] Les emissions de CO2 en el sector transport s'han incrementat considerablement durant els últims anys a causa del desenvolupament econòmic mundial. El creixement de les flotes de transport, juntament amb altres factors, ha contribuït al desequilibri del cicle de carboni del planeta. És per això, que el CO2 es considera un gas d'efecte hivernacle d'origen antropogènic que ha de ser reduït per evitar l'escalfament global. Les estratègies per reduir el CO2 dins el sector transport, estan enfocades a l'electrificació i a l'ús de combustibles neutres o de baix impacte ambiental. No obstant això, una efectiva implementació d'aquesta última, requereix un profund coneixement del procés de combustió d'aquests combustibles. En la present tesi doctoral, s'ha caracteritzat experimentalment la combustió de diferents tipus de combustibles, entre ells, alguns de baix impacte en emissions de CO2 com són l'Oli Vegetal Hidrotratat (HVO) i dos èters de oximetileno (OME1 i OMEx) .A més , degut al seu alt potencial en la reducció de contaminants, s'han avaluat mescles de dièsel i gasolina, i de HVO i Gas Liquat de Petroli (LPG), el que va requerir adequar el sistema d'injecció per evitar l'evaporació al llarg de la línia. Tots aquests combustibles i mescles han estat injectats amb una tovera mono-orifici i han estat avaluats mitjançant tècniques de visualització a alta velocitat a través dels accessos òptics del que disposa la instal·lació. Les diferents condicions termodinàmiques utilitzades son típiques d'un motor d'encesa per compressió operant en condicions de combustió a baixa temperatura. S'ha analitzat l'efecte de les propietats fisicoquímiques d'aquests combustibles i de les mescles sobre els paràmetres característics d'un raig com són la longitud líquida i la penetració de vapor. La combustió ha estat avaluada mitjançant la caracterització del temps de retard, de l'alliberació de calor i de la longitud de l'enlairament de la flama que ve condicionada pel procés de mescla. A més, l'estudi de la formació de sutge en funció de les propietats del combustible i de les característiques del procés de mescla, representa una aportació important d'aquesta tesi evidenciant que a més dels beneficis en reducció de CO2 que brinden tots aquests combustibles i mescles, també varen reduir la formació de sutge a la cambra de combustió, destacant-se entre ells els combustibles oxigenats, especialment el OMEx, que a més de no formar sutge, va ser el de major reactivitat en totes les condicions d'operació avaluades., [EN] CO2 emissions in the transport sector have increased considerably in recent years due to global economic development. The growth of transport fleets, along with other factors, has contributed to the imbalance of the planet's carbon cycle. For that, CO2 is considered a greenhouse gas from anthropogenic origin that must be reduced to avoid global warming. Strategies to reduce CO2 in the transport sector are focused on electrification and the use of neutral fuels or those with a low impact on the environment. However, an effective implementation of the latter requires a deep understanding of the combustion with those fuels. In this doctoral thesis, the combustion of different types of fuels has been experimentally characterized, including some with low impact on CO2 emissions such as Hydrotreated Vegetable Oil (HVO) and two oxymethylene ethers (OME1 and OMEx). Furthermore, due to their potential in reducing pollutants, blends of diesel and gasoline and HVO and Liquefied Petroleum Gas (LPG) have also been evaluated, which required adapting the injection system to avoid evaporation along the injection line. All these fuels and blends have been injected with a single-hole nozzle and they have been evaluated using high speed visualization techniques under different thermodynamic conditions typical of a compression ignition engine operating under low-temperature combustion conditions in installations with optical accesses. The effect of the physical-chemical properties of these fuels and blends on the characteristic parameters of a jet, such as the liquid length and the vapor penetration, has been analyzed. Combustion has been evaluated by characterizing the ignition delay, the heat release and the flame Lift-off length that is conditioned by the mixing process. Furthermore, the study of soot formation based on the fuel properties and the characteristics of the mixing process represents an important contribution of this thesis, showing that in addition to the benefits in CO2 reduction provided by the different fuels and blends used in this study, these fuels also reduced the soot formation in the combustion chamber, highlighting among them the oxygenated fuels, especially OMEx which, in addition to not forming soot, was the most reactive in all conditions of operation evaluated., This research has been partly funded by the Government of Spain and FEDER under TRANCO project (TRA2017-87694-R), by the European Union’s Horizon 2020 Programme through the ENERXICO project, grant agreement n° 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n° B-S-69926 and by Universitat Politècnica de València through the Programa de Ayudas de Investigación y Desarrollo (PAID-01-18 and PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An experimental study with renewable fuels using ECN Spray A and D nozzles

  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
  • Micó, Carlos|||0000-0001-5787-6212
  • Garcia-Carrero, Alba Andreina
[EN] The decarbonization process of the automotive industry and the road transport sector has raised the interest on the development of cleaner fuels. A proper characterization of their properties and behavior under different operating conditions is mandatory to achieve an effective implementation in commercial engines. With this objective, the current work presents a comparison of two injectors from the Engine Combustion Network (ECN), namely Spray A and Spray D injectors, in terms of spray characteristics and combustion behavior for different fuels: diesel, dodecane, Hydrotreated Vegetable Oil (HVO), and two types of oxymethylene ethers (OME1 and OME x ). The aim is to analyze how differences in nozzle geometry affect the behavior of different types of fuels. The experiments were carried out in a High Temperature and High Pressure test rig and operating conditions were chosen following ECN guidelines. Visualization techniques such as high speed schlieren imaging, OH* chemiluminescence and diffused back illumination were implemented to analyze the differences in liquid length, vapor penetration, auto ignition, flame lift-off length, and soot formation for both nozzles. In general, results showed the same trend for all the fuels tested: longer liquid length and faster vapor penetration for Spray D, as well as higher ignition delay and longer lift-off length. However, it was found that these parameters were less sensitive to the nozzle diameter for the oxygenated fuels tested. Furthermore, a different trend was observed for OME1, in terms of ignition behavior, in comparison to the other fuels. In terms of soot production, the Spray D nozzle increases its formation with the non-oxygenated fuels. In contrast, no soot was observed with the oxygenated ones under any operating conditions., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge that this research work has been partly funded by the European Union's Horizon 2020 Programme, grant agreement no. 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement no. B-S-69926 and by Universitat Politecnica de Valencia through the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-18). Part of the equipment used in this work was funded by FEDER and GVA through contract IDIFEDER/2018/037.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental Study of the Effect of Hydrotreated Vegetable Oil and Oxymethylene Ethers on Main Spray and Combustion Characteristics under Engine Combustion Network Spray A Conditions

  • Pastor, José V.|||0000-0003-4113-4681
  • García-Oliver, José M|||0000-0002-2676-9681
  • Micó, Carlos|||0000-0001-5787-6212
  • Garcia-Carrero, Alba Andreina
  • Gómez, Arantzazu
[EN] Featured Application This work contributes to the understanding of the macroscopic characteristics of the spray as well as to the evolution of the combustion process for alternative fuels. All these fuels have been studied under the same operating conditions than diesel therefore the comparison can be made directly, leaving in evidence that some fuels can achieve a similar behavior to diesel in terms of auto ignition but avoiding one of the biggest disadvantages of diesel such as the soot formation. Moreover, the quantification of characteristic parameters such as ignition delay, liquid length, vapor penetration and flame lift-off length represent the most important data to adjust and subsequently validate the computational models that simulate the spray evolution and combustion development of these alternative fuels inside the combustion chamber. The stringent emission regulations have motivated the development of cleaner fuels as diesel surrogates. However, their different physical-chemical properties make the study of their behavior in compression ignition engines essential. In this sense, optical techniques are a very effective tool for determining the spray evolution and combustion characteristics occurring in the combustion chamber. In this work, quantitative parameters describing the evolution of diesel-like sprays such as liquid length, spray penetration, ignition delay, lift-off length and flame penetration as well as the soot formation were tested in a constant high pressure and high temperature installation using schlieren, OH* chemiluminescence and diffused back-illumination extinction imaging techniques. Boundary conditions such as rail pressure, chamber density and temperature were defined using guidelines from the Engine Combustion Network (ECN). Two paraffinic fuels (dodecane and a renewable hydrotreated vegetable oil (HVO)) and two oxygenated fuels (methylal identified as OME(1)and a blend of oxymethylene ethers, identified as OMEx) were tested and compared to a conventional diesel fuel used as reference. Results showed that paraffinic fuels and OME(x)sprays have similar behavior in terms of global combustion metrics. In the case of OME1, a shorter liquid length, but longer ignition delay time and flame lift-off length were observed. However, in terms of soot formation, a big difference between paraffinic and oxygenated fuels could be appreciated. While paraffinic fuels did not show any significant decrease of soot formation when compared to diesel fuel, soot formed by OME(1)and OME(x)was below the detection threshold in all tested conditions., This research has been partly funded by the European Union's Horizon 2020 Programme through the ENERXICO project, grant agreement no 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement no B-S-69926 and by Universitat Politecnica de Valencia through the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-18).