Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Water and Cu+ Synergy in Selective CO2 Hydrogenation to Methanol over Cu-MgO-Al2O3 Catalysts

  • Fernández-Villanueva, Estefanía
  • Lustemberg, Pablo G.
  • Zhao, Minjie
  • Soriano Rodriguez, Jose
  • Ganduglia-Pirovano, M. Verónica
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] The CO2 hydrogenation reaction to produce methanol holds great significance as it contributes to achieving a CO2-neutral economy. Previous research identified isolated Cu+ species doping the oxide surface of a Cu-MgO-Al2O3-mixed oxide derived from a hydrotalcite precursor as the active site in CO2 hydrogenation, stabilizing monodentate formate species as a crucial intermediate in methanol synthesis. In this work, we present a molecular-level understanding of how surface water and hydroxyl groups play a crucial role in facilitating spontaneous CO2 activation at Cu+ sites and the formation of monodentate formate species. Computational evidence has been experimentally validated by comparing the catalytic performance of the Cu-MgO-Al2O3 catalyst with hydroxyl groups against that of its hydrophobic counterpart, where hydroxyl groups are blocked using an esterification method. Our work highlights the synergistic effect between doped Cu+ ions and adjacent hydroxyl groups, both of which serve as key parameters in regulating methanol production via CO2 hydrogenation. By elucidating the specific roles of these components, we contribute to advancing our understanding of the underlying mechanisms and provide valuable insights for optimizing methanol synthesis processes., The authors express their gratitude for the support received through the grants PID2021-1262350B-C31 and PID2021-128915NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.11) and Generalitat Valenciana (ref MFA/2022/016). P.G.L. thanks the CSIC for the extension of the MSCA-IF Grant Agreement No. 832121. E.F.V. thanks UPV for her Margarita Salas postdoctoral fellowship and both Spanish MIU and European Union NextGenerationEU for the financial support. Computer time provided by the RES (Red Espanola de Supercomputacion) resources at Mare Nostrum 4 (BSC, Barcelona) and La Palma (IAC, La Palma) nodes is acknowledged. M.Z. acknowledges the China Scholarship Council (CSC) for Ph.D. fellowship (CSC NO. 202006440003). The DFT data that support the findings of this study are available in Materials Cloud {https://www.materialscloud.org/home} with the identifier DOI: 10.24435/materialscloud:tz-pn. The data is also available from the authors upon reasonable request.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Active and Stable Ni/La-Doped Ceria Material for Catalytic CO2Reduction by Reverse Water-Gas Shift Reaction

  • Álvarez Galván, María Consuelo
  • Lustemberg, Pablo G.
  • Oropeza, Freddy E.
  • Bachiller-Baeza, B.
  • Dapena Ospina, Martín
  • Herranz Herrera, María
  • Cebollada Borao, Jesús
  • Collado, Laura
  • Campos Martín, José Miguel
  • Peña O'Shea, Víctor A. de la
  • Alonso, J. A.
  • Ganduglia-Pirovano, M. V.
[EN] The design of an active, effective, and economically viable catalyst for CO2 conversion into value-added products is crucial in the fight against global warming and energy demand. We have developed very efficient catalysts for reverse water-gas shift (rWGS) reaction. Specific conditions of the synthesis by combustion allow the obtention of macroporous materials based on nanosized Ni particles supported on a mixed oxide of high purity and crystallinity. Here, we show that Ni/La-doped CeO2 catalysts─with the "right"Ni and La proportions─have an unprecedented catalytic performance per unit mass of catalyst for the rWGS reaction as the first step toward CO2 valorization. Correlations between physicochemical properties and catalytic activity, obtained using a combination of different techniques such as X-ray and neutron powder diffraction, Raman spectroscopy, in situ near ambient pressure X-ray photoelectron spectroscopy, electron microscopy, and catalytic testing, point out to optimum values for the Ni loading and the La proportion. Density functional theory calculations of elementary steps of the reaction on model Ni/ceria catalysts aid toward the microscopic understanding of the nature of the active sites. This finding offers a fundamental basis for developing economical catalysts that can be effectively used for CO2 reduction with hydrogen. A catalyst based on Ni0.07/(Ce0.9La0.1Ox)0.93 shows a CO production of 58 × 10-5 molCO·gcat-1·s-1 (700 °C, H2/CO2 = 2; selectivity to CO > 99.5), being stable for 100 h under continuous reaction., We acknowledge the financial support of the Spanish Ministry of Science and Innovation (PID2021-123287OB-I00, PID2021-122477-OB-I00, PID2021-128915NB-I00, and RTI2018-101604-B-I00) and of the CSIC through the i-LINK 2021 program (LINKA20408). Financial support has also been received from AEI-MINECO/FEDER (Nympha Project, PID2019-106315RB-I00), “Comunidad de Madrid” regional government, and the European Structural Funds (FotoArt-CM project, S2018/NMT-4367). Authors also acknowledge financial support from the grant PLEC2021-007906 funded by MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR”. We are grateful to ILL (France) for making all facilities available. This project also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 832121. Computer time provided by the RES (Red Española de Supercomputación) resources at the MareNostrum 4 (BSC, Barcelona) node and the DECI resources at the BEM cluster of the WCSS based in Poland with the support from PRACE aislb is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nature of the Active Sites on Ni/CeO2Catalysts for Methane Conversions

  • Lustemberg, Pablo G.
  • Mao, Zhongtian
  • Salcedo, Agustín
  • Irigoyen, Beatriz
  • Ganduglia-Pirovano, M. V.
  • Campbell, Charles T.
Effective catalysts for the direct conversion of methane to methanol and for methane's dry reforming to syngas are Holy Grails of catalysis research toward clean energy technologies. It has recently been discovered that Ni at low loadings on CeO2(111) is very active for both of these reactions. Revealing the nature of the active sites in such systems is paramount to a rational design of improved catalysts. Here, we correlate experimental measurements on the CeO2(111) surface to show that the most active sites are cationic Ni atoms in clusters at step edges, with a small size wherein they have the highest Ni chemical potential. We clarify the reasons for this observation using density functional theory calculations. Focusing on the activation barrier for C-H bond cleavage during the dissociative adsorption of CH4 as an example, we show that the size and morphology of the supported Ni nanoparticles together with strong Ni-support bonding and charge transfer at the step edge are key to the high catalytic activity. We anticipate that this knowledge will inspire the development of more efficient catalysts for these reactions., Department of Energy, Office of Basic Energy Sciences, Chemical Sciences Division grant number DE-FG02-96ER14630, for support of this work. A.S. thanks FIUBA for the Peruilh doctoral fellowship and UBA for the research grant for a short-term stay at the ICP-CSIC in Madrid. This project also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no 832121. We thank J. A. Rodriguez for helpful discussions. Computer time provided by the Red Española de Supercomputación (RES) resources at MareNostrum 4 (BSC, Barcelona), Caesaraugusta (BIFI-UNIZAR, Zaragoza), and La Palma (IAC, La Laguna, Tenerife) nodes is acknowledged. Computer time provided by the DECI resources at Finis Terrae II based in Spain at CESGA, with the support from PRACE aislb, is also acknowledged. M.V.G.-P. thanks the support by the MICINN-Spain (RTI2018-101604-B-I00), The authors declare no competing financial interest. The DFT data that support the findings of this study are available in Materials Cloud {https://www.materialscloud.org/home} with the identifier DOI: 10.24435/materialscloud:ksqb. The repository contains the calculations described in Figures 2−4 and the related content in SupportingInformation. The data are also available from the authors upon reasonable request.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reaction Pathway for Coke-free methane steam reforming on a Ni/ CeO2Catalyst: Active Sites and the Role of Metal-Support Interactions

  • Salcedo, Agustín
  • Lustemberg, Pablo G.
  • Rui, Ning
  • Palomino, Robert M.
  • Liu, Zongyuan
  • Nemsak, Slavomir
  • Senanayake, Sanjaya D.
  • Rodriguez, José A.
  • Ganduglia-Pirovano, M. V.
  • Irigoyen, Beatriz
Methane steam reforming (MSR) plays a key role in the production of syngas and hydrogen from natural gas. The increasing interest in the use of hydrogen for fuel cell applications demands development of catalysts with high activity at reduced operating temperatures. Ni-based catalysts are promising systems because of their high activity and low cost, but coke formation generally poses a severe problem. Studies of ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) indicate that CH4/H2O gas mixtures react with Ni/CeO2(111) surfaces to form OH, CHx, and CHxO at 300 K. All of these species are easy to form and desorb at temperatures below 700 K when the rate of the MSR process is accelerated. Density functional theory (DFT) modeling of the reaction over ceria-supported small Ni nanoparticles predicts relatively low activation barriers between 0.3 and 0.7 eV for complete dehydrogenation of methane to carbon and the barrierless activation of water at interfacial Ni sites. Hydroxyls resulting from water activation allow for CO formation via a COH intermediate with a barrier of about 0.9 eV, which is much lower than that through a pathway involving lattice oxygen from ceria. Neither methane nor water activation is a rate-determining step, and the OH-assisted CO formation through the COH intermediate constitutes a low-barrier pathway that prevents carbon accumulation. The interactions between Ni and the ceria support and the low metal loading are crucial for the reaction to proceed in a coke-free and efficient way. These results pave the way for further advances in the design of stable and highly active Ni-based catalysts for hydrogen production., Financial support from Universidad de Buenos Aires (UBACyT −20020190100167BA) and ANPCyT (PICT-2015-2135). M.V.G.-P. acknowledges the support by the MICINN-Spain (RTI2018-101604-B-I00). This project also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 832121. The work carried out at Brookhaven National Laboratory was supported by the U.S. Department of Energy (Chemical Sciences Division, DESC0012704). S.D.S. is supported by a U.S. Department of Energy Early Career Award.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vibrational frequencies of CO bound to all three low-index cerium oxide surfaces: A consistent theoretical description of vacancy-induced changes using density functional theory

  • Lustemberg, Pablo G.
  • Yang, C.
  • Wang, Y.
  • Wöll, C.
  • Ganduglia-Pirovano, M. V.
The facet-dependent adsorption of CO on oxidized and reduced CeO2 single crystal surfaces is reviewed, with emphasis on the effect of CO coverage and the ability of state-of-the-art quantum-mechanical methods to provide reliable energies and an accurate description of the IR vibrational frequency of CO. Comparison with detailed, high-resolution experimental infrared reflection absorption spectroscopy data obtained for single crystal samples allows the assignment of the different CO vibrational bands observed on all three low-index ceria surfaces. Good agreement is achieved with the hybrid density functional theory approach with the HSE06 functional and with saturation coverage. It is shown that CO is very sensitive to the structure of cerium oxide surfaces and to the presence of oxygen vacancies. The combined theoretical-experimental approach offers new opportunities for a better characterization of ceria nanoparticles and for unraveling changes occurring during reactions involving CO at higher pressures. © 2023 Author(s)., This project received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 832121, the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Project No. 426888090—SFB 1441, and the National Natural Science Foundation of China (21902005). M.V.G.-P. acknowledges the support by the MICINN-Spain (Grant Nos. RTI2018-101604-B-I00 and PID2021-128915NB-I00) and the International Excellence Fellowship of Karlsruhe Institute of Technology (KIT) funded within the Framework of the University of Excellence Concept “The Research University in the Helmholtz Association I Living the Change” Germany. Computer time provided by FinisTerrae3 at CESGA (Centro de Supercomputación de Galicia) and the RES (Red Española de Supercomputación) resources at MareNostrum 4 (BSC, Barcelona) and LaPalma (IAC, Canarias) nodes is acknowledged., The data that support the findings of this study are openly available in Materials Cloud (https://www.materialscloud.org/home) at http://doi.org/10.24435/materialscloud:7n-7m, Peer reviewed