Skip to main content

DISEÑO DE CATALIZADORES DE METALES NO NOBLES COMBINADOS CON CERIA PARA LA CONVERSION DE GASES DE EFECTO INVERNADERO EN PRODUCTOS DE ALTO VALOR AÑADIDO

RTI2018-101604-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

CuGaO2 delafossite as a high-surface area model catalyst for Cu+-activated reactions

  • Fornero, Esteban L.
  • Murgida, Gustavo E.
  • Bosco, Marta V.
  • Hernández Garrido, Juan Carlos
  • Aguirre, Alejo
  • Calaza, Florencia C.
  • Stacchiola, Dario
  • Ganduglia-Pirovano, M. Verónica
  • Bonivardi, Adrian L.
Copper is one of the goldilocks metals in catalysis. Deciphering the local atomic environment and oxidation state of active centers in supported copper catalysts, as well as the design of materials to control their stability under reaction conditions remains a great challenge today. We show here that a mixed-oxide of copper delafossite with gallium (CuGaO2, Cu1+ and Ga3+) in the form of porous nanoplates, mainly exposing (1 1 0) facets with Cu1+ and Ga3+ cations in well-defined surface positions is a promising material as a model catalyst to explore the activity and stability of Cu1+-activated reactions. It is shown that the delafossite structure is preserved after calcination or reduction pretreatments (in pure O2 or H2, respectively). Extensive reduction of the mixed-oxide leads to a stable catalyst with higher activity for CO oxidation, as a result of the formation of geminal dicarbonyl species on Cuδ+, with 0 < δ < 1, under reaction conditions.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Exceptional Low-Temperature CO Oxidation over Noble-Metal-Free Iron-Doped Hollandites: An In-Depth Analysis of the Influence of the Defect Structure on Catalytic Performance

  • Gómez-Recio, Isabel
  • Pan, Huiyan
  • Azor-Lafarga, Alberto
  • Ruiz-González, María Luisa
  • Hernando, María
  • Parras, Marina
  • Fernández-Díaz, María Teresa
  • Delgado Jaén, Juan José
  • Chen, Xiaowei
  • Goma Jiménez, Daniel
  • Portehault, David
  • Sanchez, Clément
  • Cabero, Mariona
  • Martínez-Arias, A.
  • González-Calbet, José M.
  • Calvino Gámez, José Juan
A family of iron-doped manganese-related hollandites, KxMn1−yFeyO2−δ (0 ≤ y ≤ 0.15), with high performance in CO oxidation have been prepared. Among them, the most active catalyst, K0.11Mn0.876Fe0.123O1.80(OH)0.09, is able to oxidize more than 50% of CO at room temperature. Detailed compositional and structural characterization studies, using a wide battery of thermogravimetric, spectroscopic, and diffractometric techniques, both at macroscopic and microscopic levels, have provided essential information about this never-reported behavior, which relates to the oxidation state of manganese. Neutron diffraction studies evidence that the above compound stabilizes hydroxyl groups at the midpoints of the tunnel edges as in isostructural β- FeOOH. The presence of oxygen and hydroxyl species at the anion sublattice and Mn3+, confirmed by electron energy loss spectroscopy, appears to play a key role in the catalytic activity of this doped hollandite oxide. The analysis of these detailed structural features has allowed us to point out the key role of both OH groups and Mn3+ content in these materials, which are able to effectively transform CO without involving any critical, noble metal in the catalyst formulation., This work was supported by FEDER/Spanish Ministry of Science and Innovation through Research Projects MAT2017- 87579-R, MAT2017-82252-R, RTI2018-101604-B-I00, MCIN/AEI/10.13039/501100011033, Project PID2020- 113006-RB-I00, and ENE2017-82451-C3-2-R. The authors acknowledge the National Centre for Electron Microscopy (ELECMI National Singular Scientific Facility) for provision of corrected aberration microscopy.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The structure of oxygen vacancies in the near-surface of reduced CeO2 (111) under strain

  • Han, Zhong-Kang
  • Zhang, Lei
  • Liu, Meilin
  • Ganduglia-Pirovano, M. V.
  • Gao, Yi
[EN] Strain has been widely recognized as important for tuning the behavior of defects in metal oxides since properties such as defect configuration, electronic structure, excess charge localization, and local atomic distortions may be affected by surface strain. In CeO, the most widely used promoter in three-way catalysts and solid state electrolyte in fuel cells, the behaviors of oxygen vacancies, and associated Ce polarons are crucial in applications. Recent STM and AFM investigations as well as DFT-based calculations have indicated that in the near-surface of CeO (111), at low temperatures and vacancy concentrations, subsurface oxygen vacancies are more stable than surface ones, and the Ce ions are next-nearest neighbors to both types of vacancies, which can be explained by the better ability of the system to relax the lattice strain induced by vacancy formation as well as by the excess charge localization. The results also revealed that the interaction between first-neighbor vacancies is repulsive. In this work, the relative stability of surface and subsurface oxygen vacancies at the CeO (111) surface under in-plane strain is investigated by means of DFT+U calculations. The tensile strain favors isolated surface vacancies with next nearest neighbor polarons, whereas isolated subsurface vacancies with nearest neighbor polarons are energetically favored under compressive strain. In addition, the formation of both surface and subsurface dimers is favored over having corresponding isolated species under compressive strain, which implies the possibility of controlling the formation of vacancy clusters using strain. In many applications, ceria is employed as a supported thin film or within a heterostructure in which ceria can be strained, and this study shows that strain can be a useful handle to tune properties of such materials., This work has been funded by the National Natural Science Foundation of China (11574340, 21773287) as well as by the US Department of Energy SECA Core Technology Program (DE-NT0006557) and DOE ARPA-E REBELS Program (DE-AR0000502). MVG-P acknowledges support by the MINECO- and MICINN-Spain (CTQ2015-71823-R and RTI2018-101604-B-I00, respectively). The computational resources utilized in this research have been provided by the National Supercomputing Center in Tianjin, the Shanghai Supercomputer Center and the Guangzhou Supercomputer Center, as well as by the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number TG-DMR170045. We thank Gustavo E. Murgida from the CAC-CNEA and CONICET-Argentina for fruitful discussions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Corrigendum: The Structure of Oxygen Vacancies in the Near-Surface of Reduced CeO2 (111) Under Strain

  • Han, Zhong-Kang
  • Zhang, Lei
  • Liu, Meilin
  • Ganduglia-Pirovano, M. V.
  • Gao, Yi
[EN] A Corrigendum on The Structure of Oxygen Vacancies in the Near-Surface of Reduced CeO2 (111) Under Strain by Han, Z.-K., Zhang, L., Liu, M., Ganduglia-Pirovano, M. V., and Gao, Y. (2019). Front. Chem. 7:436. doi: 10.3389/fchem.2019.00436 In the original article, there was a mistake in Figure 8 as published. The SSV and SSSV labeling in the top-right and bottom-left panels were interchanged. Moreover, in the bottom-right panel, the Densities of states (DOS) summed over spin projections and all atoms for a SSSV shown, did not correspond to those of the structure under the +4% strain with AB and 12 Ce3+ configurations and 5 × 5 periodicity, as indicated in the caption. The corrected Figure 8 appears below. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated., This work has been funded by the National Natural Science Foundation of China (11574340, 21773287) as well as by the US Department of Energy SECA Core Technology Program (DE-NT0006557) and DOE ARPA-E REBELS Program (DE-AR0000502). MVG-P acknowledges support by the MINECO- and MICINN-Spain (CTQ2015-71823-R and RTI2018-101604-B-I00, respectively). The computational resources utilized in this research have been provided by the National Supercomputing Center in Tianjin, the Shanghai Supercomputer Center and the Guangzhou Supercomputer Center, as well as by the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number TG-DMR170045. We thank Gustavo E. Murgida from the CAC-CNEA and CONICET-Argentina for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preferential Oxidation of CO over CoFe2O4 and M/CoFe2O4 (M = Ce, Co, Cu or Zr) Catalysts

  • Béjaoui, Mehdi
  • Elmhamdi, Abdelhakim
  • Pascual, Laura
  • Pérez-Bailac, Patricia
  • Nahdi, Kais
  • Martínez Arias, Arturo
CoFe<sub>2</sub>O<sub>4</sub> prepared by sol-gel has been examined with respect to its catalytic performance for preferential CO oxidation in a H<sub>2</sub>-rich stream. In turn, the promoting effects of incorporation of Ce, Co, Cu, and Zr by impregnation on the surface of CoFe<sub>2</sub>O<sub>4</sub> on the process are examined as well. The catalysts have been characterized by N<sub>2</sub> adsorption, X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), temperature programmed reduction (TPR), and X-ray photoelectron spectra (XPS), as well as diffuse reflectance infrared DRIFTS under reaction conditions with the aim of establishing structure/activity relationships for the mentioned catalyst/process. It is shown that while the presence of the various metals on CoFe<sub>2</sub>O<sub>4</sub> hinders a low temperature CO oxidation process, it appreciably enhances the activity above 125 °C. This is basically attributed to the surface modifications induced in CoFe<sub>2</sub>O<sub>4</sub> upon introduction of the metals. In turn, no methanation activity is observed in any case except for the copper-containing catalyst, in which achievement of reduced states of cobalt appears most favored., The Spanish Ministerio de Ciencia e Innovación is acknowledged for financial support (project RTI2018-101604-B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microemulsion vs. Precipitation: Which Is the Best Synthesis of Nickel–Ceria Catalysts for Ethanol Steam Reforming?

  • Pizzolitto, Cristina
  • Menegazzo, Federica
  • Ghedini, Elena
  • Martínez Arias, Arturo
  • Cortés Corberán, Vicente
  • Signoretto, Michela
Ethanol steam reforming is one of the most promising ways to produce hydrogen from biomass, and the goal of this research is to investigate robust, selective and active catalysts for this reaction. In particular, this work is focused on the effect of the different ceria support preparation methods on the Ni active phase stabilization. Two synthetic approaches were evaluated: precipitation (with urea) and microemulsion. The effects of lanthanum doping were investigated too. All catalysts were characterized using N<sub>2</sub>-physisorption, temperature programmed reduction (TPR), XRD and SEM, to understand the influence of the synthetic approach on the morphological and structural features and their relationship with catalytic properties. Two synthesis methods gave strongly different features. Catalysts prepared by precipitation showed higher reducibility (which involves higher oxygen mobility) and a more homogeneous Ni particle size distribution. Catalytic tests (at 500 °C for 5 h using severe Gas Hourly Space Velocity conditions) revealed also different behaviors. Though the initial conversion (near complete) and H<sub>2</sub> yield (60%, i.e., 3.6 mol H<sub>2</sub>/mol ethanol) were the same, the catalyst prepared by microemulsion was deactivated much faster. Similar trends were found for La-promoted supports. Catalyst deactivation was mainly related to coke deposition as was shown by SEM of the used samples. Higher reducibility of the catalysts prepared by the precipitation method led to a decrease in coke deposition rate by facilitating the removal of coke precursors, which made them the more stable catalysts of the reaction., This research was funded by MINECO project CTQ2015-71823-R and MICINN project RTI2018-101604-B-I00 (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Methanol Production over Non-promoted Cu-MgO-Al2O3Materials with Ex-solved 2 nm Cu Particles: Insights from an Operando Spectroscopic Study

  • Cored, Jorge
  • Mazarío, Jaime
  • Cerdá Moreno, Cristina
  • Lustemberg, Pablo G.
  • Ganduglia-Pirovano, M. V.
  • Dómine, Marcelo Eduardo
  • Concepción, Patricia
Enhanced methanol production is obtained over a non-promoted Cu-MgO-Al2O3 mixed oxide catalyst derived from a Cu-Mg-Al hydrotalcite precursor (HT) containing narrowly distributed small Cu NPs (2 nm). Conversions close to the equilibrium (∼20%) with a methanol selectivity of 67% are achieved at 230 °C, 20 bar, and a space velocity of 571 mL·gcat-1·h-1. Based on operando spectroscopic studies, the striking activity of this Cu-based catalyst is ascribed to the stabilization of Cu+ ions favored under reaction conditions due to lattice reorganization associated with the "HT-memory effect"promoted by water. Temperature-resolved infrared-mass spectrometry experiments have enabled the discernment of monodentate formate species, stabilized on Cu+ as the intermediate in methanol synthesis, in line with the results of density functional theory calculations. These monodentate formate species are much more reactive than bridge formate species, the latter ones behaving as intermediates in methane and CO formation. Moreover, poisoning of the Cu0 surface by strongly adsorbed species behaving as spectators is observed under reaction conditions. This work presents a detailed spectroscopic study highlighting the influence of the reaction pressure on the stabilization of active surface sites, and the possibility of enhancing methanol production on usually less active non-promoted nano-sized copper catalysts, provided that the proper support is selected, allowing the stabilization of doped Cu+. Thus, a methanol formation rate of 2.6 × 10-3 molMeOH·gcat-1·h-1 at 230 °C, 20 bar, and WHSV = 28 500 mL·gcat-1·h-1 is obtained on the Cu-MgO-Al2O3 HT-derived catalyst with 71% methanol selectivity, compared to 2.2 × 10-4 molMeOH·gcat-1·h-1 with 54% methanol selectivity obtained on a reference Cu/(Al2O3/MgO) catalyst not derived from a HT structure., The research leading to these results received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Programme (SEV-2016-0683) and through the RTI2018-099668-B-C21 and RTI2018-101604-B-I00 projects. The authors also thank the Microscopy Service of UPV for kind help on measurements. J.C. thanks the Spanish Government (MINECO) for a “Severo Ochoa” grant (BES-2015-075748). J.M. thanks the MICINN (CTQ2015-67592) for his Ph.D. scholarship. M.E.D. thanks financial support by the Spanish Government (PGC2018-097277-B100). P.G.L. thanks the CSIC for the extension of the MSCA-IF Grant Agreement no. 832121. Computer time provided by the RES (Red Española de Supercomputación) resources at Mare Nostrum 4 (BSC, Barcelona) and La Palma (IAC, La Palma) nodes is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nature of the Active Sites on Ni/CeO2Catalysts for Methane Conversions

  • Lustemberg, Pablo G.
  • Mao, Zhongtian
  • Salcedo, Agustín
  • Irigoyen, Beatriz
  • Ganduglia-Pirovano, M. V.
  • Campbell, Charles T.
Effective catalysts for the direct conversion of methane to methanol and for methane's dry reforming to syngas are Holy Grails of catalysis research toward clean energy technologies. It has recently been discovered that Ni at low loadings on CeO2(111) is very active for both of these reactions. Revealing the nature of the active sites in such systems is paramount to a rational design of improved catalysts. Here, we correlate experimental measurements on the CeO2(111) surface to show that the most active sites are cationic Ni atoms in clusters at step edges, with a small size wherein they have the highest Ni chemical potential. We clarify the reasons for this observation using density functional theory calculations. Focusing on the activation barrier for C-H bond cleavage during the dissociative adsorption of CH4 as an example, we show that the size and morphology of the supported Ni nanoparticles together with strong Ni-support bonding and charge transfer at the step edge are key to the high catalytic activity. We anticipate that this knowledge will inspire the development of more efficient catalysts for these reactions., Department of Energy, Office of Basic Energy Sciences, Chemical Sciences Division grant number DE-FG02-96ER14630, for support of this work. A.S. thanks FIUBA for the Peruilh doctoral fellowship and UBA for the research grant for a short-term stay at the ICP-CSIC in Madrid. This project also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no 832121. We thank J. A. Rodriguez for helpful discussions. Computer time provided by the Red Española de Supercomputación (RES) resources at MareNostrum 4 (BSC, Barcelona), Caesaraugusta (BIFI-UNIZAR, Zaragoza), and La Palma (IAC, La Laguna, Tenerife) nodes is acknowledged. Computer time provided by the DECI resources at Finis Terrae II based in Spain at CESGA, with the support from PRACE aislb, is also acknowledged. M.V.G.-P. thanks the support by the MICINN-Spain (RTI2018-101604-B-I00), The authors declare no competing financial interest. The DFT data that support the findings of this study are available in Materials Cloud {https://www.materialscloud.org/home} with the identifier DOI: 10.24435/materialscloud:ksqb. The repository contains the calculations described in Figures 2−4 and the related content in SupportingInformation. The data are also available from the authors upon reasonable request.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reaction Pathway for Coke-free methane steam reforming on a Ni/ CeO2Catalyst: Active Sites and the Role of Metal-Support Interactions

  • Salcedo, Agustín
  • Lustemberg, Pablo G.
  • Rui, Ning
  • Palomino, Robert M.
  • Liu, Zongyuan
  • Nemsak, Slavomir
  • Senanayake, Sanjaya D.
  • Rodriguez, José A.
  • Ganduglia-Pirovano, M. V.
  • Irigoyen, Beatriz
Methane steam reforming (MSR) plays a key role in the production of syngas and hydrogen from natural gas. The increasing interest in the use of hydrogen for fuel cell applications demands development of catalysts with high activity at reduced operating temperatures. Ni-based catalysts are promising systems because of their high activity and low cost, but coke formation generally poses a severe problem. Studies of ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) indicate that CH4/H2O gas mixtures react with Ni/CeO2(111) surfaces to form OH, CHx, and CHxO at 300 K. All of these species are easy to form and desorb at temperatures below 700 K when the rate of the MSR process is accelerated. Density functional theory (DFT) modeling of the reaction over ceria-supported small Ni nanoparticles predicts relatively low activation barriers between 0.3 and 0.7 eV for complete dehydrogenation of methane to carbon and the barrierless activation of water at interfacial Ni sites. Hydroxyls resulting from water activation allow for CO formation via a COH intermediate with a barrier of about 0.9 eV, which is much lower than that through a pathway involving lattice oxygen from ceria. Neither methane nor water activation is a rate-determining step, and the OH-assisted CO formation through the COH intermediate constitutes a low-barrier pathway that prevents carbon accumulation. The interactions between Ni and the ceria support and the low metal loading are crucial for the reaction to proceed in a coke-free and efficient way. These results pave the way for further advances in the design of stable and highly active Ni-based catalysts for hydrogen production., Financial support from Universidad de Buenos Aires (UBACyT −20020190100167BA) and ANPCyT (PICT-2015-2135). M.V.G.-P. acknowledges the support by the MICINN-Spain (RTI2018-101604-B-I00). This project also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 832121. The work carried out at Brookhaven National Laboratory was supported by the U.S. Department of Energy (Chemical Sciences Division, DESC0012704). S.D.S. is supported by a U.S. Department of Energy Early Career Award.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal-Support Interactions and C1 Chemistry: Transforming Pt-CeO2into a Highly Active and Stable Catalyst for the Conversion of Carbon Dioxide and Methane

  • Zhang, Feng
  • Gutiérrez, Ramon A.
  • Lustemberg, Pablo G.
  • Liu, Zongyuan
  • Rui, Ning
  • Wu, Tianpin
  • Ramírez, Pedro J.
  • Xu, Wenqian
  • Idriss, Hicham
  • Ganduglia-Pirovano, M. V.
  • Senanayake, Sanjaya D.
  • Rodriguez, José A.
[EN] There is an ongoing search for materials which can accomplish the activation of two dangerous greenhouse gases like carbon dioxide and methane. In the area of C1 chemistry, the reaction between CO2 and CH4 to produce syngas (CO/H2), known as methane dry reforming (MDR), is attracting a lot of interest due to its green nature. On Pt(111), high temperatures must be used to activate the reactants, leading to a substantial deposition of carbon which makes this metal surface useless for the MDR process. In this study, we show that strong metal-support interactions present in Pt/CeO2(111) and Pt/CeO2 powders lead to systems which can bind CO2 and CH4 well at room temperature and are excellent and stable catalysts for the MDR process at moderate temperature (500 °C). The behavior of these systems was studied using a combination of in situ/operando methods (AP-XPS, XRD, and XAFS) which pointed to an active Pt-CeO2-x interface. In this interface, the oxide is far from being a passive spectator. It modifies the chemical properties of Pt, facilitating improved methane dissociation, and is directly involved in the adsorption and dissociation of CO2 making the MDR catalytic cycle possible. A comparison of the benefits gained by the use of an effective metal-oxide interface and those obtained by plain bimetallic bonding indicates that the former is much more important when optimizing the C1 chemistry associated with CO2 and CH4 conversion. The presence of elements with a different chemical nature at the metal-oxide interface opens the possibility for truly cooperative interactions in the activation of C-O and C-H bonds., The XRD and XAFS experiments carried out at the Advanced Photon SourceBeamline 17BM (XRD) and 9BM (XAFS) at Argonne National Laboratory was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357. This project has also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skl̷odowska-Curie grant agreement No 832121. M.V.G.P. thanks the support from the MINECO and MICINN-Spain(CTQ2015-71823-R and RTI2018-101604-B-I00, respectively), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vibrational frequencies of CO bound to all three low-index cerium oxide surfaces: A consistent theoretical description of vacancy-induced changes using density functional theory

  • Lustemberg, Pablo G.
  • Yang, C.
  • Wang, Y.
  • Wöll, C.
  • Ganduglia-Pirovano, M. V.
The facet-dependent adsorption of CO on oxidized and reduced CeO2 single crystal surfaces is reviewed, with emphasis on the effect of CO coverage and the ability of state-of-the-art quantum-mechanical methods to provide reliable energies and an accurate description of the IR vibrational frequency of CO. Comparison with detailed, high-resolution experimental infrared reflection absorption spectroscopy data obtained for single crystal samples allows the assignment of the different CO vibrational bands observed on all three low-index ceria surfaces. Good agreement is achieved with the hybrid density functional theory approach with the HSE06 functional and with saturation coverage. It is shown that CO is very sensitive to the structure of cerium oxide surfaces and to the presence of oxygen vacancies. The combined theoretical-experimental approach offers new opportunities for a better characterization of ceria nanoparticles and for unraveling changes occurring during reactions involving CO at higher pressures. © 2023 Author(s)., This project received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 832121, the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Project No. 426888090—SFB 1441, and the National Natural Science Foundation of China (21902005). M.V.G.-P. acknowledges the support by the MICINN-Spain (Grant Nos. RTI2018-101604-B-I00 and PID2021-128915NB-I00) and the International Excellence Fellowship of Karlsruhe Institute of Technology (KIT) funded within the Framework of the University of Excellence Concept “The Research University in the Helmholtz Association I Living the Change” Germany. Computer time provided by FinisTerrae3 at CESGA (Centro de Supercomputación de Galicia) and the RES (Red Española de Supercomputación) resources at MareNostrum 4 (BSC, Barcelona) and LaPalma (IAC, Canarias) nodes is acknowledged., The data that support the findings of this study are openly available in Materials Cloud (https://www.materialscloud.org/home) at http://doi.org/10.24435/materialscloud:7n-7m, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the Interaction of Nickel and Copper with Ceria on Ethanol Steam Reforming over Ni-Cu-CeO2 Catalysts

  • Pájaro, Karen C.
  • Cortés Corberán, Vicente
  • Martínez Arias, Arturo
Catalysts of nickel-ceria, nickel-copper-ceria, and copper-ceria were explored with respect to their properties for hydrogen production through ethanol steam reforming (ESR). They were prepared by coprecipitation of the components within inverse microemulsions to achieve intimate contact between them, and the catalysts were characterized by N2 adsorption measurements, XRD, Raman spectroscopy, TPR, and XPS. The catalysts were tested for the ESR reaction, and they were regenerated with oxygen when significant deactivation took place, as occurred for the copper-containing systems. In contrast, the nickel–ceria catalyst exhibits a high activity and stability despite the formation of an important amount of carbon deposits during the course of the ESR test. The presence of nickel sites, which strongly interact with the ceria support, and which are affected by the presence of copper, and the limitation of copper for C-C bond breaking are invoked to explain the results obtained on the whole., This work was financed by Projects RTI2018-101604-B-I00 and PID2021-128915NB-I00 of the Spanish Ministry of Science and Innovation (MICINN)., Peer reviewed