Skip to main content

DISEÑO RACIONAL DE CATALIZADORES NANOESTRUCTURADOS BASADOS EN METALES NO NOBLES Y CERIA PARA PRODUCCION DE HIDROGENO A PARTIR DE PRODUCTOS DERIVADOS DE LA BIOMASA

CTQ2015-71823-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The structure of oxygen vacancies in the near-surface of reduced CeO2 (111) under strain

  • Han, Zhong-Kang
  • Zhang, Lei
  • Liu, Meilin
  • Ganduglia-Pirovano, M. V.
  • Gao, Yi
[EN] Strain has been widely recognized as important for tuning the behavior of defects in metal oxides since properties such as defect configuration, electronic structure, excess charge localization, and local atomic distortions may be affected by surface strain. In CeO, the most widely used promoter in three-way catalysts and solid state electrolyte in fuel cells, the behaviors of oxygen vacancies, and associated Ce polarons are crucial in applications. Recent STM and AFM investigations as well as DFT-based calculations have indicated that in the near-surface of CeO (111), at low temperatures and vacancy concentrations, subsurface oxygen vacancies are more stable than surface ones, and the Ce ions are next-nearest neighbors to both types of vacancies, which can be explained by the better ability of the system to relax the lattice strain induced by vacancy formation as well as by the excess charge localization. The results also revealed that the interaction between first-neighbor vacancies is repulsive. In this work, the relative stability of surface and subsurface oxygen vacancies at the CeO (111) surface under in-plane strain is investigated by means of DFT+U calculations. The tensile strain favors isolated surface vacancies with next nearest neighbor polarons, whereas isolated subsurface vacancies with nearest neighbor polarons are energetically favored under compressive strain. In addition, the formation of both surface and subsurface dimers is favored over having corresponding isolated species under compressive strain, which implies the possibility of controlling the formation of vacancy clusters using strain. In many applications, ceria is employed as a supported thin film or within a heterostructure in which ceria can be strained, and this study shows that strain can be a useful handle to tune properties of such materials., This work has been funded by the National Natural Science Foundation of China (11574340, 21773287) as well as by the US Department of Energy SECA Core Technology Program (DE-NT0006557) and DOE ARPA-E REBELS Program (DE-AR0000502). MVG-P acknowledges support by the MINECO- and MICINN-Spain (CTQ2015-71823-R and RTI2018-101604-B-I00, respectively). The computational resources utilized in this research have been provided by the National Supercomputing Center in Tianjin, the Shanghai Supercomputer Center and the Guangzhou Supercomputer Center, as well as by the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number TG-DMR170045. We thank Gustavo E. Murgida from the CAC-CNEA and CONICET-Argentina for fruitful discussions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Corrigendum: The Structure of Oxygen Vacancies in the Near-Surface of Reduced CeO2 (111) Under Strain

  • Han, Zhong-Kang
  • Zhang, Lei
  • Liu, Meilin
  • Ganduglia-Pirovano, M. V.
  • Gao, Yi
[EN] A Corrigendum on The Structure of Oxygen Vacancies in the Near-Surface of Reduced CeO2 (111) Under Strain by Han, Z.-K., Zhang, L., Liu, M., Ganduglia-Pirovano, M. V., and Gao, Y. (2019). Front. Chem. 7:436. doi: 10.3389/fchem.2019.00436 In the original article, there was a mistake in Figure 8 as published. The SSV and SSSV labeling in the top-right and bottom-left panels were interchanged. Moreover, in the bottom-right panel, the Densities of states (DOS) summed over spin projections and all atoms for a SSSV shown, did not correspond to those of the structure under the +4% strain with AB and 12 Ce3+ configurations and 5 × 5 periodicity, as indicated in the caption. The corrected Figure 8 appears below. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated., This work has been funded by the National Natural Science Foundation of China (11574340, 21773287) as well as by the US Department of Energy SECA Core Technology Program (DE-NT0006557) and DOE ARPA-E REBELS Program (DE-AR0000502). MVG-P acknowledges support by the MINECO- and MICINN-Spain (CTQ2015-71823-R and RTI2018-101604-B-I00, respectively). The computational resources utilized in this research have been provided by the National Supercomputing Center in Tianjin, the Shanghai Supercomputer Center and the Guangzhou Supercomputer Center, as well as by the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number TG-DMR170045. We thank Gustavo E. Murgida from the CAC-CNEA and CONICET-Argentina for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microemulsion vs. Precipitation: Which Is the Best Synthesis of Nickel–Ceria Catalysts for Ethanol Steam Reforming?

  • Pizzolitto, Cristina
  • Menegazzo, Federica
  • Ghedini, Elena
  • Martínez Arias, Arturo
  • Cortés Corberán, Vicente
  • Signoretto, Michela
Ethanol steam reforming is one of the most promising ways to produce hydrogen from biomass, and the goal of this research is to investigate robust, selective and active catalysts for this reaction. In particular, this work is focused on the effect of the different ceria support preparation methods on the Ni active phase stabilization. Two synthetic approaches were evaluated: precipitation (with urea) and microemulsion. The effects of lanthanum doping were investigated too. All catalysts were characterized using N<sub>2</sub>-physisorption, temperature programmed reduction (TPR), XRD and SEM, to understand the influence of the synthetic approach on the morphological and structural features and their relationship with catalytic properties. Two synthesis methods gave strongly different features. Catalysts prepared by precipitation showed higher reducibility (which involves higher oxygen mobility) and a more homogeneous Ni particle size distribution. Catalytic tests (at 500 °C for 5 h using severe Gas Hourly Space Velocity conditions) revealed also different behaviors. Though the initial conversion (near complete) and H<sub>2</sub> yield (60%, i.e., 3.6 mol H<sub>2</sub>/mol ethanol) were the same, the catalyst prepared by microemulsion was deactivated much faster. Similar trends were found for La-promoted supports. Catalyst deactivation was mainly related to coke deposition as was shown by SEM of the used samples. Higher reducibility of the catalysts prepared by the precipitation method led to a decrease in coke deposition rate by facilitating the removal of coke precursors, which made them the more stable catalysts of the reaction., This research was funded by MINECO project CTQ2015-71823-R and MICINN project RTI2018-101604-B-I00 (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal-Support Interactions and C1 Chemistry: Transforming Pt-CeO2into a Highly Active and Stable Catalyst for the Conversion of Carbon Dioxide and Methane

  • Zhang, Feng
  • Gutiérrez, Ramon A.
  • Lustemberg, Pablo G.
  • Liu, Zongyuan
  • Rui, Ning
  • Wu, Tianpin
  • Ramírez, Pedro J.
  • Xu, Wenqian
  • Idriss, Hicham
  • Ganduglia-Pirovano, M. V.
  • Senanayake, Sanjaya D.
  • Rodriguez, José A.
[EN] There is an ongoing search for materials which can accomplish the activation of two dangerous greenhouse gases like carbon dioxide and methane. In the area of C1 chemistry, the reaction between CO2 and CH4 to produce syngas (CO/H2), known as methane dry reforming (MDR), is attracting a lot of interest due to its green nature. On Pt(111), high temperatures must be used to activate the reactants, leading to a substantial deposition of carbon which makes this metal surface useless for the MDR process. In this study, we show that strong metal-support interactions present in Pt/CeO2(111) and Pt/CeO2 powders lead to systems which can bind CO2 and CH4 well at room temperature and are excellent and stable catalysts for the MDR process at moderate temperature (500 °C). The behavior of these systems was studied using a combination of in situ/operando methods (AP-XPS, XRD, and XAFS) which pointed to an active Pt-CeO2-x interface. In this interface, the oxide is far from being a passive spectator. It modifies the chemical properties of Pt, facilitating improved methane dissociation, and is directly involved in the adsorption and dissociation of CO2 making the MDR catalytic cycle possible. A comparison of the benefits gained by the use of an effective metal-oxide interface and those obtained by plain bimetallic bonding indicates that the former is much more important when optimizing the C1 chemistry associated with CO2 and CH4 conversion. The presence of elements with a different chemical nature at the metal-oxide interface opens the possibility for truly cooperative interactions in the activation of C-O and C-H bonds., The XRD and XAFS experiments carried out at the Advanced Photon SourceBeamline 17BM (XRD) and 9BM (XAFS) at Argonne National Laboratory was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357. This project has also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skl̷odowska-Curie grant agreement No 832121. M.V.G.P. thanks the support from the MINECO and MICINN-Spain(CTQ2015-71823-R and RTI2018-101604-B-I00, respectively), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Diffusion Barriers Block Defect Occupation on Reduced CeO2 (111)

  • Lustemberg, Pablo G.
  • Pan, Y.
  • Shaw, B.J.
  • Grinter, D.
  • Pang, Chi
  • Thornton, G.
  • Pérez, Rubén
  • Ganduglia-Pirovano, M. V.
  • Nilius, N.
[EN] Surface defects are believed to govern the adsorption behavior of reducible oxides. We challenge this perception on the basis of a combined scanning-tunneling-microscopy and density-functional-theory study, addressing the Au adsorption on reduced CeO2-x(111). Despite a clear thermodynamic preference for oxygen vacancies, individual Au atoms were found to bind mostly to regular surface sites. Even at an elevated temperature, aggregation at step edges and not decoration of defects turned out to be the main consequence of adatom diffusion. Our findings are explained with the polaronic nature of the Au-ceria system, which imprints a strong diabatic character onto the diffusive motion of adatoms. Diabatic barriers are generally higher than those in the adiabatic regime, especially if the hopping step couples to an electron transfer into the ad-gold. As the population of O vacancies always requires a charge exchange, defect decoration by Au atoms becomes kinetically hindered. Our study demonstrates that polaronic effects determine not only electron transport in reducible oxides but also the adsorption characteristics and therewith the surface chemistry., Support from the COST Action CM1104 is acknowledged. P. G. L. thanks CONICET for a postdoctoral fellowship and funding (PIP No. 272). G. T. announces support from the ERC AdV Grant ‘EnergySurf’, the EPSRC and the Royal Society. R. P. and M. V. G. P. thank the Spanish MINECO (Projects No. CTQ2012-32928, No. CTQ2015-71823-R, No. MAT2014-54484-P, and No. MDM-2014-0377);
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure/redox/activity relationships in CeO2/CuMn2O4 CO-PROX catalysts

  • Elmhamdi, A.
  • Pascual, Laura
  • Nahdi, K.
  • Martínez-Arias, Arturo
tCuMn2O4prepared by a microemulsion method is employed as support of ceria with different loadinglevel (between 5 and 80 wt.%) and the CO-PROX properties of corresponding catalysts are explored. Thecatalysts have been characterized by XRD, SBETmeasurement, HREM and XEDS, XPS and TPR, which allowsestablishing a complete model of the structural and chemical characteristics of the catalysts. The charac-terization results have been correlated with the analysis of CO-PROX catalytic properties performed bymeans of activity measurements complemented by operando-DRIFTS. Important differences in structural,redox and catalytic properties are detected as a function of the amount of ceria present in the catalyst.These are shown to depend basically on the size of the supported ceria nanocrystals as well as the factthat the increase in the ceria loading gradually increases the interfacial character of surface exposed sitesof the support with important implications for the CO-PROX properties of the catalyst.© 2017 Elsevier B.V. All rights reserved, Ministerio de Economía, Industria y Competitividad (Plan Nacional Project CTQ2015-71823-R)., Peer reviewed