Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Ribbons of Light: Emerging (Sb,Bi)(S,Se)(Br,I) Van der WaalsChalcohalides for Next-Generation Energy Applications

  • Caño, Iván
  • Galiana Blanco, Beatriz
Documento escrito por un elevado número de autores/as, solo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M, (Sb,Bi)(S,Se)(Br,I) pnictogen chalcohalides constitute an emerging family of Van der Waals (VdW) semiconductors with remarkable potential for energy-related applications, including photovoltaics (PV), photocatalysis (PC), and photoelectrocatalysis (PEC). These ternary compounds exhibit a quasi-1D orthorhombic crystalline phase, and an electronic structure analogous to lead-halide perovskites, making them promising candidates for sustainable and high-performance energy devices. This study introduces a new versatile and adaptable synthesis methodology, which combines co-evaporation of binary chalcogenides with reactive annealing under high-pressure halide atmospheres, to fabricate the eight (Sb,Bi)(S,Se)(Br,I) chalcohalides. Comprehensive structural, compositional, and optoelectronic analyses reveal a wide bandgap range (1.2–2.2 eV), high absorption coefficients, and anisotropic properties driven by unique ribbon-like morphology. Theoretical and experimental results highlight their high stability, versatile chemical adaptability, and defect-tolerant characteristics. Moreover, the distinct differences in morphology and crystallization between Sb and Bi-based compounds, as well as the influence of chalcogen and halogen elements on the optical and structural properties are discussed. Demonstrations of functional devices, including photocatalytic systems, underscore the practical viability of these materials. This work establishes a foundation for the development of pnictogen chalcohalides as scalable and eco-friendly alternatives for advanced energy applications., This research has received funding from the European Union H2020Framework Program under the SENSATE project: Low-dimensional semi-conductors for optically tunable solar harvesters (grant agreement Num-ber 866018) and Renew-PV European COST action (CA21148). L.S. and J.L.acknowledge the financial support from the Spanish Ministry of Scienceand Innovation, and Generalitat de Catalunya by projects MICINN/FEDERPID2021-124572OB-C31 and GC 2021 SGR01061 respectively. I.C. andM.P. acknowledge financial support of the Spanish Ministry of Scienceand Innovation from the InnoPV project (PID2022-140226OB-C31). E.S.and J.P. acknowledge financial support of the Spanish Ministry of Scienceand Innovation from the CURIO-CITY project (PID2023-148976OB-C41).E.S. and A.J.A. acknowledge funding from the MICINN project ACT-FAST(PCI2023-145971-2), from the CETP-Partnership Program 2022. This workwas part of Maria de Maetzu Units of Excellence Programme CEX2023 -001300-M, funded by MCIN/AEI/10.13039/501100011033. L.C-B. and E.S.acknowledge the financial support from the Spanish Ministry of Scienceand Innovation under the MATER-ONE project (PID2020-116719RB-C41and C44). L.S. is grateful to the MICINN Ramon y Cajal program (grantagreement RYC2019-026704). A.N. acknowledges the Spanish Ministry ofScience and Innovation for his FPI Ph.D. scholarship (PRE-2021-098293).C.L. acknowledges funding from the Spanish Ministry of Science and In-novation under FPU grant (FPU22/02945). C.C. acknowledges supportfrom MICINN Ramon y Cajal program (grant agreement RYC2018-024947-I), and grants PID2020-112975GB-I00 and TED2021-130265B-C22. C.L.and C.C. acknowledge technical support for computational resources atMareNostrum4, provided by the Barcelona Supercomputing Center (FI-2024-1-0025, FI-2024-1-0005, FI-2024-2-0006, FI-2024-2-0003). L.W. andH-Z. C. acknowledge the Singapore Ministry of Education Tier 1 grant(RG68/21). J.L. is a Serra Húnter Fellow and is grateful to the ICREAAcademia Program. E.S. and J-L.T. acknowledge the ICREA Academia pro-gram.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

SbSeI and SbSeBr micro-columnar solar cells by a novel high pressure-based synthesis process

  • Caño, Ivan
  • Navarro Güell, Alejandro
  • Maggi, Edoardo
  • Barrio, Maria
  • Tamarit, Josep Lluís
  • Svatek, Simon
  • Antolín, Elisa
  • Yan, Shunya
  • Barrena, Esther
  • Galiana, Beatriz
  • Placidi, Marcel
  • Puigdollers, Joaquim
  • Saucedo, Edgardo
Van der Waals chalcogenides and chalcohalides have the potential to become the next thin film PV breakthrough, owing to the earth-abundancy and non-toxicity of their components, and their stability, high absorption coefficient and quasi-1D structure, which leads to enhanced electrical anisotropic properties when the material is oriented in a specific crystalline direction. However, quasi-1D semiconductors beyond Sb2(S,Se)3, such as SbSeX chalcohalides, have been scarcely investigated for energy generation applications, and rarely synthesised by physical vapor deposition methodologies, despite holding the promise of widening the bandgap range (opening the door to tandem or semi-transparent devices), and showing enticing new properties such as ferroelectric behaviour and defect-tolerant nature. In this work, SbSeI and SbSeBr micro-columnar solar cells have been obtained for the first time by an innovative methodology based on the selective halogenation of Sb2Se3 thin films at pressure above 1 atm. It is shown that by increasing the annealing temperature and pressure, the height and density of the micro-columnar structures grows monotonically, resulting in SbSeI single-crystal columns up to 30 μm, and tuneable morphology. In addition, solar cell prototypes with substrate configuration have shown remarkable Voc values above 550 mV and 1.8 eV bandgap., This research has received funding from the European Union H2020 Framework Program under through the SENSATE project: Low dimensional semiconductors for optically tunable solar harvesters (grant agreement number 866018). Other funding from the Ministry of Science and Innovation of the Government of Spain under the MATER-ONE (PID2020- 116719RB-C41) and MIRACLE projects. I. C. acknowledges UPC and Banco Santander for his FPI-UPC PhD scholarship. A. N. acknowledges the acknowledges the Ministry of Science and Innovation for his FPI PhD scholarship. E. B. acknowledges node DME (Cadiz, Spain) of ICTS “ELECMI”. M. P. acknowledges the nancial support from Ministry of Science and Innovation within the Ramon y Cajal program (RYC-2017- 23758). E. S. acknowledges the ICREA Academia program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

KCN Chemical Etching of van der Waals Sb2Se3 Thin Films Synthesized at Low Temperature Leads to Inverted Surface Polarity and Improved Solar Cell Efficiency

  • Jiménez Guerra, Maykel
  • Calvo Barrio, Lorenzo
  • Asensi, José Miguel
  • Caño Prades, Iván
  • Yan, Shunya
  • Barrena, Esther
  • Puigdollers, Joaquim
  • Jehl, Zacharie
  • Sánchez, Yudania
  • Saucedo, Edgardo
Recent developments in Sb2Se3 van der Waals material as an absorber candidate for thin film photovoltaic applications have demonstrated the importance of surface management for improving the conversion efficiency of this technology. Sb2Se3 thin films' versatility in delivering good efficiencies in both superstrate and substrate configurations, coupled with a compatibility with various low-temperature deposition techniques (below 500 °C and often below 350 °C), makes them highly attractive for advanced photovoltaic applications. This study presents a comparative analysis of the most effective chemical etchings developed for related thin film chalcogenide technologies to identify and understand the most appropriate surface chemical treatments for Sb2Se3 in substrate configuration, synthesized using a sequential process at very low temperatures (320 °C). Eight different chemical etchings were tested and investigated, and the results show that only KCN-based solutions lead to an improvement in the solar cell's performance, primarily due to an increase in the fill factor. Surface analysis of the samples shows that KCN etching produces very Sb-rich surfaces that do not affect the properties of the bulk. It is proposed that this Sb-rich interface inverts the surface polarity, creating a "buried junction" with CdS, thereby explaining the improvement of the fill factor of the devices, as confirmed by device modeling. The results of this study underscore the importance of surface management in low-temperature synthesized Sb2Se3 absorbers, where Sb-rich interfaces are crucial for achieving high-efficiency devices. This research contributes to ongoing efforts to improve the performance of Sb2Se3 thin film photovoltaic technology and could pave the way for the development of more efficient solar cells with optimized interfaces., This research has received funding from the European Union H2020 Framework Programme under Grant Agreement No. 866018, Low dimensional semiconductors for optically tunable solar harvesters (SENSATE); by the Spanish Ministry of Science and Innovation under the MATER-ONE project (PID2020-116719RB-C41 and C44), MIRACLE project (TED2021-130265B-C21), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S). S.Y. is financially supported by the China Scholarship Council (CSC) under Grant No. 202006990034. I.C. acknowledges UPC and Banco Santander for the FPI-UPC scholarship (2021 FPI-UPC_060), and Z.J. acknowledges the Spanish Ministry of Science and Innovation for the Ramon y Cajal Fellowship (RYC2021-033239-I). E.S. acknowledges the ICREA Academia program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Giant thermally induced band-gap renormalization in anharmonic silver chalcohalide antiperovskites

  • Benítez Colominas, Pol|||0009-0005-4910-7241
  • Chen, Siyu
  • Jiang, Ruoshi
  • López Álvarez, Cibrán
  • Tamarit Mur, José Luis|||0000-0002-7965-0000
  • Íñiguez, Jorge
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Monserrat Sánchez, Bartomeu
  • Cazorla Silva, Claudio|||0000-0002-6501-4513
Silver chalcohalide antiperovskites (CAP), Ag3XY (X = S, Se; Y = Br, I), are a family of highly anharmonic inorganic compounds with great potential for energy applications. However, a substantial and unresolved discrepancy exists between the optoelectronic properties predicted by theoretical first-principles methods and those measured experimentally at room temperature, hindering the fundamental understanding and rational engineering of CAP. In this work, we employ density functional theory, tight-binding calculations, and anharmonic Fröhlich theory to investigate the optoelectronic properties of CAP at finite temperatures. Near room temperature, we observe a giant band-gap (Eg) reduction of approximately 20–60% relative to the value calculated at T = 0 K, bringing the estimated Eg into excellent agreement with experimental measurements. This relative T-induced band-gap renormalization is roughly twice the largest value previously reported in the literature for similar temperature ranges. Low-energy optical polar phonon modes, which break inversion symmetry and enhance the overlap between silver and chalcogen s electronic orbitals in the conduction band, are identified as the primary drivers of this significant Eg reduction. Furthermore, when temperature effects are considered, the optical absorption coefficient of CAP increases by nearly an order of magnitude in the visible light spectrum. These findings not only bridge a critical gap between theory and experiment but also pave the way for future technologies where temperature, electric fields, and light dynamically modulate optoelectronic properties, establishing CAP as a versatile platform for energy and photonic applications., We acknowledge financial support by MICIN/AEI/10.13039/501100011033 and ERDF/EU under the grants TED2021-130265B-C22, TED2021-130265B-C21, PID2023-146623NB-I00, PID2023-147469NB-C21 and RYC2018-024947-I and by the Generalitat de Catalunya under the grants 2021SGR-00343, 2021SGR-01519 and 2021SGR-01411. Computational support was provided by the Red Española de Supercomputación under the grants FI-2024-1-0005, FI-2024-2-0003 and FI-2024-3-0004. This work is part of the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI (10.13039/501100011033). P. B. acknowledges support from the predoctoral program AGAUR-FI ajuts (2024 FI-1 00070) Joan Oró, which is backed by the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia, as well as the European Social Plus Fund. C. L. acknowledges support from the Spanish Ministry of Science, Innovation and Universities under an FPU grant. E. S. and J.-Ll.T. are grateful to the ICREA Academia program. Work at LIST was supported by the Luxembourg National Research Fund through grant C21/MS/15799044/FERRODYNAMICS. This project received funding from the European Union's H2020 European Research Council under the grant agreement number 866018 (SENSATE). S. C. and B. M. are supported by a EPSRC grant [EP/V062654/1] and R. J. and B. M. are supported by a UKRI Future Leaders Fellowship [MR/V023926/1]. B. M. also acknowledges support from the Gianna Angelopoulos Programme for Science, Technology, and Innovation, and from the Winton Programme for the Physics of Sustainability., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Ag-promoted Na retention for synergistic defect passivation in kesterite solar cells

  • El Khouja, Outman
  • Gong, Yuancai|||0000-0003-3548-9064
  • Goniotakis, Harris|||0009-0009-9994-2463
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • Rovira Ferrer, David|||0000-0003-3867-8987
  • Jiménez Arguijo, Alex|||0000-0002-3583-0958
  • Segura Blanch, Oriol
  • Scaffidi, Romain
  • Malerba, Claudia
  • Valentini, Matteo
  • Hernández Ramírez, Francisco|||0000-0002-2690-947X
  • Giraldo Muñoz, Sergio|||0000-0003-4881-5041
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Jehl, Zacharie Victor Samuel Na|||0000-0002-2610-5973
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
The performance of kesterite solar cells is fundamentally limited by a large open-circuit voltage deficit. Here, we demonstrate aprecursor-level Ag–Na codoping strategy via solution processing to overcome this limitation through synergistic regulation oflattice properties and bulk defects. A 10% Ag substitution triggers pronounced grain coarsening and reduces band-tail disorderby suppressing Cu Zn antisite defects, evidenced by a modest but systematic reduction in Urbach energy. Depth profiling reveals aunique cooperative growth mechanism in which rapid Ag-induced surface crystallization effectively traps Na within the film,suppressing severe Na loss during high-temperature selenization and creating a concentrated Na reservoir near the back contact.Na subsequently diffuses upward to passivate bulk defects. Consequently, this Ag-driven lattice framework enables a minimal 2%Na addition to significantly boost the majority carrier concentration, effectively reversing the conventional expectation that Agalloying inevitably depletes carriers. Uniting these structural and electronic improvements at the optimal 10Ag–2Na composition,we achieve a champion power conversion efficiency of 13.1% alongside a severely reduced Voc deficit of 0.378 V. This synergisticcodoping approach offers a robust and scalable pathway for advancing high-efficiency earth-abundant thin-film photovoltaics, This study was supported by HORIZON EUROPE InnovativeEurope (101169056, 866018, CA21148), Ministerio de Ciencia yTecnología (PID2023-148976OB-C41, C44 (CURIO-CITY), PCI2023-145971-2 (ACT-FAST), PID2022-140226OB-C31, C32 (INNO-PV),PCI2024-155100-2, PCI2024-155054-2 (ENPOWER, CETP-PartnershipProgram 2023, co), and CNS2023-14817 (SELECTRON, cofunded byNextGenerationEU/PRTR), María de Maeztu Units (CEX2023-001300-M), and Departament de Salut, Generalitat de Catalunya (2021 SGR01286), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Elimination of interface energy barriers using dendrimer polyelectrolytes with fractal geometry

  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Tom, Thomas
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Martín García, Isidro|||0000-0001-8833-9057
  • Maggi, Edoardo
  • Asensi López, José Miguel
  • Lopez Vidrier, Julià
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Bertomeu Balagueró, Joan
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
In this work we study conjugated polyelectrolyte (CPE) films based on polyamidoamine (PAMAM) dendrimers of generations G1 and G3. These fractal macromolecules are compared to branched polyethylenimine (b-PEI) polymer using methanol as the solvent. All of these materials present a high density of amino groups, which protonated by methoxide counter-anions create strong dipolar interfaces. The vacuum level shift associated to these films on n-type silicon was 0.93 eV for b-PEI, 0.72 eV for PAMAM G1 and 1.07 eV for PAMAM G3. These surface potentials were enough to overcome Fermi level pinning, which is a typical limitation of aluminium contacts on n-type silicon. A specific contact resistance as low as 20 mO·cm2 was achieved with PAMAM G3, in agreement with the higher surface potential of this material. Good electron transport properties were also obtained for the other materials. Proof-of-concept silicon solar cells combining vanadium oxide as a hole-selective contact with these new electron transport layers have been fabricated and compared. The solar cell with PAMAM G3 surpassed 15% conversion efficiency with an overall increase of all the photovoltaic parameters. The performance of these devices correlates with compositional and nanostructural studies of the different CPE films. Particularly, a figure-of-merit (Vs) for CPE films that considers the number of protonated amino groups per macromolecule has been introduced. The fractal geometry of dendrimers leads to a geometric increase in the number of amino groups per generation. Thus, investigation of dendrimer macromolecules seems a very good strategy to design CPE films with enhanced charge-carrier selectivity., This research has received funding from the European Union H2020 Framework Programme under Grant Agreement no. 866018, Low dimensional semiconductors for optically tunable solar harvesters (SENSATE), by the Spanish Ministry of Science, Innovation and Universities under the MATERONE project (PID2020-116719RB-C41) as well as PID2019- 109215RB-C43 and PID2019-109215RB-C41. E.S. also thanks the ICREA Academia Program. One of the authors (T. Tom) acknowledges the support of the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456). This work is also part of projects PID2020-115719RB-C21 (GETPV) and TED2021-131778B (TROPIC) funded b y MCIN/AEI/10.13039/ 5011000110033. Project TED2021-131778B (TROPIC) is also funded by European Union “NextGenerationEU”/PRTR.″, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Polymeric interlayer in CdS-Free electron-selective contact for Sb2Se3 thin-film solar cells

  • Rovira Ferrer, David|||0000-0003-3867-8987
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Tom, Thomas
  • Jiménez Guerra, Maykel|||0000-0002-1778-8805
  • Asensi López, José Miguel
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Lopez Vidrier, Julià
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Bertomeu Balagueró, Joan
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
High open-circuit voltage in Sb2Se3 thin-film solar cells is a key challenge in the development of earth-abundant photovoltaic devices. CdS selective layers have been used as the standard electron contact in this technology. Long-term scalability issues due to cadmium toxicity and environmental impact are of great concern. In this study, we propose a ZnO-based buffer layer with a polymer-film-modified top interface to replace CdS in Sb2Se3 photovoltaic devices. The branched polyethylenimine layer at the ZnO and transparent electrode interface enhanced the performance of Sb2Se3 solar cells. An important increase in open-circuit voltage from 243 mV to 344 mV and a maximum efficiency of 2.4% was achieved. This study attempts to establish a relation between the use of conjugated polyelectrolyte thin films in chalcogenide photovoltaics and the resulting device improvements., This research was supported by the Spanish government through grants PID2019-109215RB-C41, PID2019-109215RB-C43, and PID2020-116719RB-C41 funded by MCIN/AEI/10.13039/501100011033. This research was funded by the European Union H2020 Framework Programme under Grant Agreement No. 866018, low-dimensional semiconductors for optically tunable solar harvesters (SENSATE). E.S. acknowledges the ICREA Academia program. One of the authors (T.T.) acknowledges the support of the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Formation pathway of high-efficiency kesterite solar cells fabricated through molecular ink chemistry

  • Jiménez Arguijo, Alex|||0000-0002-3583-0958
  • Gong, Yuancai|||0000-0003-3548-9064
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • El Khouja, Outman
  • Li, Jianjun|||0000-0003-2872-9648
  • Sun, Kaiwen
  • Jehl, Zacharie Victor Samuel Na|||0000-0002-2610-5973
  • Giraldo Muñoz, Sergio|||0000-0003-4881-5041
  • Xin, Hao
  • Pérez Rodríguez, Alejandro
  • Hao, Xiaojing
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
Solar cells based on kesterite materials, Cu2ZnSn(S,Se)4 (CZTSSe), offer a non-toxic, Earth-abundant solution for energy generation. However, they have historically struggled to achieve power conversion efficiencies comparable to those of other thin-film photovoltaic technologies. Here we highlight the critical role of the synthesis and formation pathway of these multinary semiconductors, discussing the challenges associated with kesterite layer fabrication and their impact on device performance. In particular, we discuss how the design of molecular inks in kesterite synthesis is key to overcoming these limitations, unveiling the connections between precursor chemistry, synthesis pathways and the formation of point and extended defects. We discuss how precise control over these factors has enabled kesterite solar cells to exceed 15% efficiency. Building on these advances, we propose strategies to further improve device performance. Finally, the insights presented here provide a framework for the exploration and development of other multinary semiconductor materials., This project received funding from the European Union’s Horizon research and innovation programme under grant agreements number 866018 (SENSATE) and 101151487 (LEKPV); by the Spanish Ministry of Science and Innovation projects number PCI2023-145971-2 (ACT-FAST) from the CETP-Partnership Program 2022, PID2022-140226OB-C31 and 32 (INNO-PV), and PID2023-148976OB-C41 (CURIO-CITY); by the National Key Research and Development Program of China (project number 2019YFE0118100) and the National Natural Science Foundation of China (project number 22075150); and by the Cost Association project number CA-21148 (Renew-PV). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033. The authors from UPC and IREC belong to the Micro and Nanotechnologies for Solar Energy Group (MNTSolar) Consolidated Research Group of the “Generalitat de Catalunya” (2021 SGR 01286). K.S. acknowledges the Australian Research Council (ARC) Discovery Early Career Researcher Award (DE230100021) and support from the Australian Centre of Advanced Photovoltaics (ACAP) as a recipient of the ACAP Fellowship (RG172864-B). ZJL acknowledges the Spanish Ministry of Science and Innovation for the Ramon y Cajal Fellowship (RYC2021-033239-I). S.G. thanks the Serra Húnter program. X. H. acknowledges the financial support of the Australian Research Council (ARC) Future Fellowship (FT190100756). E.S. acknowledges the ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Numerical investigation of interface passivation strategies for Sb2Se3/CdS solar cells

  • Gon Medaille, Axel|||0000-0002-8628-0781
  • Tiwari, Kunal Jogendra|||0000-0002-1126-2634
  • Giraldo, Sergio
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Jehl Li-Kao, Zacharie
Sb2Se3 is an emerging earth-abundant material praised for its promising optoelectronic properties, although the presence of interfacial defects at the vicinity of the p–n junction limit its performance as photovoltaic absorber. Using a device modeling approach and a realistic set of material parameters, it unravels pathways mitigating the impact of interfacial defects with a baseline Sb2Se3/CdS. Two straightforward strategies are devised and tested against the baseline. First, a thin front surface sulfurization of the Sb2Se3 absorber allowing a local lowering of the valence band and creating a “front surface field,” resulting in an increased carrier selectivity and limiting the density of holes available for interface recombination, leading to a significant efficiency improvement for optimized conditions. Second, the use of an ultrathin insulating Al2O3 layer between the absorber and the buffer layer is considered, helping in preventing detrimental chemical interdiffusion at the junction. This strategy provides a direct interface passivation, though the interlayer thickness needs a fine tuning to balance the benefits of reduced interface recombination and a detrimental Al2O3 low-conductivity layer. In each case, an analysis covering a broad range of parameters is presented, and conclusions are made in the frame of past numerical and experimental results., The authors thank Prof. Marc Burgelman, for his invaluable contribution to the field of photovoltaics by designing the program SCAPS, now widely used by various research groups around the world. The authors acknowledge the European Research Council ERC-CoG grant SENSATE (grant agreement ID: 866018) for the financial support of this work. This work is part of the R+D+i MaterOne project ref. PID 2020-116719RB-C41 funded by MCIN/AEI/10.13039/5011000110033. M.P. acknowledges the Spanish Ministry of Science and Innovation (MCIN) for the financial support in the frame of the Ramon y Cajal program (RYC-2017-23758)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac|||0009-0005-5699-466X
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel|||0000-0002-0890-0842
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • de Benito, Carola
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Interdigitated MgO/Au front selective contacts for enhanced photocatalytic systems based on TiO2 as light-absorber

  • Segura Blanch, Oriol
  • Ros Costals, Eloi
  • Agrelo Lestón, Asier|||0000-0002-4744-7278
  • Maggi, Edoardo
  • Calvo Barrio, Lorenzo
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
Selective charge extraction is a central limitation in heterogeneous photocatalysis, where short carrier diffusion lengths and interfacial recombination strongly restrict efficiency. Here we translate the photovoltaic concept of selective contacts to photocatalytic systems by designing interdigitated front architectures on a planar TiO2 absorber. Magnesium–magnesium oxide (Mg–MgOx) is used as an electron-selective layer, while gold nanoparticles act simultaneously as hole-selective contacts, plasmonic enhancers, and charge-transfer mediators toward gas-phase reactants. Interdigitated Mg–MgOx/Au patterns with controlled coverage and perimeter were fabricated on sol–gel anatase TiO2 films and tested for hydrogen production from ethanol–water vapor mixtures under UV illumination. While Au nanoparticles alone strongly enhance activity through efficient hole extraction and plasmonic effects, the addition of Mg–MgOx enables selective electron collection. However, performance is not governed by Mg–MgOx coverage alone. Samples with similar Mg–MgOx area fractions but different geometries show markedly different hydrogen production rates. To rationalize this behavior, we introduce a dimensionless geometric parameter η, defined as the normalized ratio between selective-contact perimeter and coverage. Hydrogen production follows a Langmuir–Hinshelwood-type kinetic model when expressed as a function of η, demonstrating that interfacial length, rather than area alone, controls the number of photogenerated carriers that reach adsorbed reactants before recombining. Highly interdigitated samples show up to a twofold increase in hydrogen production compared to non-patterned TiO2/Au references, despite having comparable material composition., This project received funding from the European Union’s H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain projects number PID2023-148976OBC41/C44 (CURIO-CITY) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program), PID2022-140226OB-C31C32 (INNO-PV), PID2022-138434OB-C51 (SCALING), MICIN/FEDER PID2024-156765OB-C21, PCI2024-155100-2 (ENPOWER, CETPPartnership Program 2023), funded by MCIN/AEI/10.13039/ 501100011033/FEDER, and CNS2023-14817 (SELECTRON) funded by MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR. Some of the authors from UPC belong to the Micro and Nanotechnologies for Solar Energy Group (MNT-Solar) Consolidated Research Group of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. E.S. is grateful to ICREA Academia program. J.L is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). E.R. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d’Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022., Peer Reviewed, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

10.6% Efficient solution-processed Cu2ZnSnS4solar cells via cation substitutions and Li doping

  • El Khouja, Outman
  • Gong, Yuancai|||0000-0003-3548-9064
  • Jiménez Arguijo, Alex|||0000-0002-3583-0958
  • Assahsahi, Ilhame|||0000-0002-7154-8730
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • Goniotakis, Harris|||0009-0009-9994-2463
  • Segura Blanch, Oriol
  • Navarro Güell, Alejandro
  • Radu, Cristian
  • Calvo Barrio, Lorenzo
  • Giraldo Muñoz, Sergio|||0000-0003-4881-5041
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Jehl, Zacharie Victor Samuel Na|||0000-0002-2610-5973
  • Catalin Galca, Aurelian|||0000-0002-1914-4210
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
Copper–zinc–tin–sulfide (Cu2ZnSnS4, CZTS) kesterites a promising earth-abundant and non-toxic absorber for next-generation thin-film photovoltaics. However, sulfur-based CZTS solar cells remain limited in performance, largely due to intrinsic defects and interfacial recombination losses. Here, we systematically investigate the impact of solvent chemistry and extrinsic doping and compositional engineering on the quality of solution-processed CZTS absorbers. A comparative study of three solvents, 2-methoxyethanol (MOE), dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) reveals that all yield phase-pure, and compact films due to a robust Cu+–Sn4+ molecular precursor system, with MOE producing the most uniform morphology and superior optoelectronic properties. Rather than focusing on pure CZTS, the solvent screening is conducted on Cd-alloyed CZTS (CZCTS), as Cd incorporation substantially alters precursor coordination and crystallization behavior. Building on the optimized processing route, a synergistic compositional strategy combining silver (Ag) – cadmium (Cd) co-alloying with lithium (Li) doping is introduced to suppress cation disorder, passivate grain-boundary defects, and enhance carrier transport. As a result, the optimized he optimized absorber delivers a champion device with a power conversion efficiency of 10.6%, placing it among the highest efficiencies reported for solution-processed, selenium-free CZTS solar cells. These results highlight the critical role of solvent engineering coupled with targeted extrinsic doping in overcoming the long-standing limitations of CZTS photovoltaics and provide a scalable pathway toward environmentally benign thin-film solar technologies., This work also received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number 101169056 (MENTOR) and 866018 (SENSATE), and by the Science Ministry of Spain (Ministerio de Ciencia Innovaci´on y Universidades) projects number PID2023- 148976OB-C41 and C44 (CURIO-CITY) and PCI2023-145971-2 (CT-FAST). Y.G. thanks the European Union's Horizon research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 101151487 (LEKPV). E.S. is grateful to ICREA (InstituciÓ Catalana de Recerca i Estudis Avançats) Academia program. ZJ acknowledges the RyC program (RYC2021-033239-I), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Quasi-1D SbSeI as a photocathode for light-driven hydrogen production

  • Maggi, Edoardo
  • Navarro Güell, Alejandro
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • Segura Blanch, Oriol
  • Calvo Barrio, Lorenzo
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
This work reports the first functional implementation of SbSeI as a photocathode for photoelectrochemical hydrogen production via water splitting. SbSeI is a quasi-one-dimensional chalcohalide semiconductor that naturally forms nano/micro-ribbon structures, offering highly anisotropic charge transport and an increased interfacial surface area for photoelectrochemical reactions when properly oriented. Operating in neutral phosphate buffer, the SbSeI devices achieve a photocurrent density of 1.2 mA cm-2, a half-cell solar-to-hydrogen efficiency of 0.4%, and an onset potential of 0.6 VRHE. Stable hydrogen evolution is sustained under continuous operation, demonstrating the intrinsic robustness of the material system under working conditions. A comprehensive structural, morphological, and photoelectrochemical characterization is presented, elucidating how absorber morphology and interfacial engineering govern charge transfer, efficiency, and stability. Importantly, these performances are achieved using simple device architectures, neutral electrolytes, and without reliance on scarce or noble metal nanoparticle catalysts, highlighting SbSeI as a sustainable and promising photocathode material for solar-driven hydrogen production., This project received funding from the European Union's H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain/FEDER projects number PID2023-148976OB-C41/C44 (CURIO-CITY), PID2021-124572OB-C31 (HYNTERCAT) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program). The authors belong to the ‘‘Micro and Nanotechnologies for Solar Energy Group’’ (MNTSolar) and ‘‘Energy, Catalysis, Process and Reaction Engineering’’ (ENCORE) consolidated research groups of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286 and 2021 SGR 01061, respectively). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. A.N. acknowledges the Spanish Ministry of Science and Innovation for his FPI PhD grant (PRE-2021-098293. E.S. is grateful to ICREA Academia program. L.S. is grateful to the MICINN Ramon y Cajal program (grant agreement RYC2019-026704)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Numerical investigation of interface passivation strategies for Sb2Se3/CdS solar cells

  • Gon Medaille, Axel
  • Tiwari, Kunal Jogendra
  • Giraldo, Sergio
  • Placidi, Marcel Jose
  • Saucedo Silva, Edgardo Ademar
  • Jehl Li-Kao, Zacharie
Sb2Se3 is an emerging earth-abundant material praised for its promising optoelectronic properties, although the presence of interfacial defects at the vicinity of the p–n junction limit its performance as photovoltaic absorber. Using a device modeling approach and a realistic set of material parameters, it unravels pathways mitigating the impact of interfacial defects with a baseline Sb2Se3/CdS. Two straightforward strategies are devised and tested against the baseline. First, a thin front surface sulfurization of the Sb2Se3 absorber allowing a local lowering of the valence band and creating a “front surface field,” resulting in an increased carrier selectivity and limiting the density of holes available for interface recombination, leading to a significant efficiency improvement for optimized conditions. Second, the use of an ultrathin insulating Al2O3 layer between the absorber and the buffer layer is considered, helping in preventing detrimental chemical interdiffusion at the junction. This strategy provides a direct interface passivation, though the interlayer thickness needs a fine tuning to balance the benefits of reduced interface recombination and a detrimental Al2O3 low-conductivity layer. In each case, an analysis covering a broad range of parameters is presented, and conclusions are made in the frame of past numerical and experimental results., The authors thank Prof. Marc Burgelman, for his invaluable contribution to the field of photovoltaics by designing the program SCAPS, now widely used by various research groups around the world. The authors acknowledge the European Research Council ERC-CoG grant SENSATE (grant agreement ID: 866018) for the financial support of this work. This work is part of the R+D+i MaterOne project ref. PID 2020-116719RB-C41 funded by MCIN/AEI/10.13039/5011000110033. M.P. acknowledges the Spanish Ministry of Science and Innovation (MCIN) for the financial support in the frame of the Ramon y Cajal program (RYC-2017-23758)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

10.6% Efficient solution-processed Cu2ZnSnS4solar cells via cation substitutions and Li doping

  • El Khouja, Outman
  • Gong, Yuancai
  • Jiménez Arguijo, Alex
  • Assahsahi, Ilhame
  • Caño Prades, Ivan
  • Goniotakis, Harris
  • Segura Blanch, Oriol
  • Navarro Güell, Alejandro
  • Radu, Cristian
  • Calvo Barrio, Lorenzo
  • Giraldo Muñoz, Sergio
  • Placidi, Marcel Jose
  • Jehl, Zacharie Victor Samuel Na
  • Catalin Galca, Aurelian
  • Saucedo Silva, Edgardo Ademar
Copper–zinc–tin–sulfide (Cu2ZnSnS4, CZTS) kesterites a promising earth-abundant and non-toxic absorber for next-generation thin-film photovoltaics. However, sulfur-based CZTS solar cells remain limited in performance, largely due to intrinsic defects and interfacial recombination losses. Here, we systematically investigate the impact of solvent chemistry and extrinsic doping and compositional engineering on the quality of solution-processed CZTS absorbers. A comparative study of three solvents, 2-methoxyethanol (MOE), dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) reveals that all yield phase-pure, and compact films due to a robust Cu+–Sn4+ molecular precursor system, with MOE producing the most uniform morphology and superior optoelectronic properties. Rather than focusing on pure CZTS, the solvent screening is conducted on Cd-alloyed CZTS (CZCTS), as Cd incorporation substantially alters precursor coordination and crystallization behavior. Building on the optimized processing route, a synergistic compositional strategy combining silver (Ag) – cadmium (Cd) co-alloying with lithium (Li) doping is introduced to suppress cation disorder, passivate grain-boundary defects, and enhance carrier transport. As a result, the optimized he optimized absorber delivers a champion device with a power conversion efficiency of 10.6%, placing it among the highest efficiencies reported for solution-processed, selenium-free CZTS solar cells. These results highlight the critical role of solvent engineering coupled with targeted extrinsic doping in overcoming the long-standing limitations of CZTS photovoltaics and provide a scalable pathway toward environmentally benign thin-film solar technologies., This work also received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number 101169056 (MENTOR) and 866018 (SENSATE), and by the Science Ministry of Spain (Ministerio de Ciencia Innovaci´on y Universidades) projects number PID2023- 148976OB-C41 and C44 (CURIO-CITY) and PCI2023-145971-2 (CT-FAST). Y.G. thanks the European Union's Horizon research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 101151487 (LEKPV). E.S. is grateful to ICREA (InstituciÓ Catalana de Recerca i Estudis Avançats) Academia program. ZJ acknowledges the RyC program (RYC2021-033239-I), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
  • de Benito, Carola
  • Llorca Piqué, Jordi
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Giant thermally induced band-gap renormalization in anharmonic silver chalcohalide antiperovskites

  • Benítez Colominas, Pol
  • Chen, Siyu
  • Jiang, Ruoshi
  • López Álvarez, Cibrán
  • Tamarit Mur, José Luis
  • Íñiguez, Jorge
  • Saucedo Silva, Edgardo Ademar
  • Monserrat Sánchez, Bartomeu
  • Cazorla Silva, Claudio
Silver chalcohalide antiperovskites (CAP), Ag3XY (X = S, Se; Y = Br, I), are a family of highly anharmonic inorganic compounds with great potential for energy applications. However, a substantial and unresolved discrepancy exists between the optoelectronic properties predicted by theoretical first-principles methods and those measured experimentally at room temperature, hindering the fundamental understanding and rational engineering of CAP. In this work, we employ density functional theory, tight-binding calculations, and anharmonic Fröhlich theory to investigate the optoelectronic properties of CAP at finite temperatures. Near room temperature, we observe a giant band-gap (Eg) reduction of approximately 20–60% relative to the value calculated at T = 0 K, bringing the estimated Eg into excellent agreement with experimental measurements. This relative T-induced band-gap renormalization is roughly twice the largest value previously reported in the literature for similar temperature ranges. Low-energy optical polar phonon modes, which break inversion symmetry and enhance the overlap between silver and chalcogen s electronic orbitals in the conduction band, are identified as the primary drivers of this significant Eg reduction. Furthermore, when temperature effects are considered, the optical absorption coefficient of CAP increases by nearly an order of magnitude in the visible light spectrum. These findings not only bridge a critical gap between theory and experiment but also pave the way for future technologies where temperature, electric fields, and light dynamically modulate optoelectronic properties, establishing CAP as a versatile platform for energy and photonic applications., We acknowledge financial support by MICIN/AEI/10.13039/501100011033 and ERDF/EU under the grants TED2021-130265B-C22, TED2021-130265B-C21, PID2023-146623NB-I00, PID2023-147469NB-C21 and RYC2018-024947-I and by the Generalitat de Catalunya under the grants 2021SGR-00343, 2021SGR-01519 and 2021SGR-01411. Computational support was provided by the Red Española de Supercomputación under the grants FI-2024-1-0005, FI-2024-2-0003 and FI-2024-3-0004. This work is part of the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI (10.13039/501100011033). P. B. acknowledges support from the predoctoral program AGAUR-FI ajuts (2024 FI-1 00070) Joan Oró, which is backed by the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia, as well as the European Social Plus Fund. C. L. acknowledges support from the Spanish Ministry of Science, Innovation and Universities under an FPU grant. E. S. and J.-Ll.T. are grateful to the ICREA Academia program. Work at LIST was supported by the Luxembourg National Research Fund through grant C21/MS/15799044/FERRODYNAMICS. This project received funding from the European Union's H2020 European Research Council under the grant agreement number 866018 (SENSATE). S. C. and B. M. are supported by a EPSRC grant [EP/V062654/1] and R. J. and B. M. are supported by a UKRI Future Leaders Fellowship [MR/V023926/1]. B. M. also acknowledges support from the Gianna Angelopoulos Programme for Science, Technology, and Innovation, and from the Winton Programme for the Physics of Sustainability., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Formation pathway of high-efficiency kesterite solar cells fabricated through molecular ink chemistry

  • Jiménez Arguijo, Alex
  • Gong, Yuancai
  • Caño Prades, Ivan
  • El Khouja, Outman
  • Li, Jianjun
  • Sun, Kaiwen
  • Jehl, Zacharie Victor Samuel Na
  • Giraldo Muñoz, Sergio
  • Xin, Hao
  • Pérez Rodríguez, Alejandro
  • Hao, Xiaojing
  • Saucedo Silva, Edgardo Ademar
Solar cells based on kesterite materials, Cu2ZnSn(S,Se)4 (CZTSSe), offer a non-toxic, Earth-abundant solution for energy generation. However, they have historically struggled to achieve power conversion efficiencies comparable to those of other thin-film photovoltaic technologies. Here we highlight the critical role of the synthesis and formation pathway of these multinary semiconductors, discussing the challenges associated with kesterite layer fabrication and their impact on device performance. In particular, we discuss how the design of molecular inks in kesterite synthesis is key to overcoming these limitations, unveiling the connections between precursor chemistry, synthesis pathways and the formation of point and extended defects. We discuss how precise control over these factors has enabled kesterite solar cells to exceed 15% efficiency. Building on these advances, we propose strategies to further improve device performance. Finally, the insights presented here provide a framework for the exploration and development of other multinary semiconductor materials., This project received funding from the European Union’s Horizon research and innovation programme under grant agreements number 866018 (SENSATE) and 101151487 (LEKPV); by the Spanish Ministry of Science and Innovation projects number PCI2023-145971-2 (ACT-FAST) from the CETP-Partnership Program 2022, PID2022-140226OB-C31 and 32 (INNO-PV), and PID2023-148976OB-C41 (CURIO-CITY); by the National Key Research and Development Program of China (project number 2019YFE0118100) and the National Natural Science Foundation of China (project number 22075150); and by the Cost Association project number CA-21148 (Renew-PV). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033. The authors from UPC and IREC belong to the Micro and Nanotechnologies for Solar Energy Group (MNTSolar) Consolidated Research Group of the “Generalitat de Catalunya” (2021 SGR 01286). K.S. acknowledges the Australian Research Council (ARC) Discovery Early Career Researcher Award (DE230100021) and support from the Australian Centre of Advanced Photovoltaics (ACAP) as a recipient of the ACAP Fellowship (RG172864-B). ZJL acknowledges the Spanish Ministry of Science and Innovation for the Ramon y Cajal Fellowship (RYC2021-033239-I). S.G. thanks the Serra Húnter program. X. H. acknowledges the financial support of the Australian Research Council (ARC) Future Fellowship (FT190100756). E.S. acknowledges the ICREA Academia program., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ag-promoted Na retention for synergistic defect passivation in kesterite solar cells

  • El Khouja, Outman
  • Gong, Yuancai
  • Goniotakis, Harris
  • Caño Prades, Ivan
  • Rovira Ferrer, David
  • Jiménez Arguijo, Alex
  • Segura Blanch, Oriol
  • Scaffidi, Romain
  • Malerba, Claudia
  • Valentini, Matteo
  • Hernández Ramírez, Francisco
  • Giraldo Muñoz, Sergio
  • Placidi, Marcel Jose
  • Jehl, Zacharie Victor Samuel Na
  • Saucedo Silva, Edgardo Ademar
The performance of kesterite solar cells is fundamentally limited by a large open-circuit voltage deficit. Here, we demonstrate aprecursor-level Ag–Na codoping strategy via solution processing to overcome this limitation through synergistic regulation oflattice properties and bulk defects. A 10% Ag substitution triggers pronounced grain coarsening and reduces band-tail disorderby suppressing Cu Zn antisite defects, evidenced by a modest but systematic reduction in Urbach energy. Depth profiling reveals aunique cooperative growth mechanism in which rapid Ag-induced surface crystallization effectively traps Na within the film,suppressing severe Na loss during high-temperature selenization and creating a concentrated Na reservoir near the back contact.Na subsequently diffuses upward to passivate bulk defects. Consequently, this Ag-driven lattice framework enables a minimal 2%Na addition to significantly boost the majority carrier concentration, effectively reversing the conventional expectation that Agalloying inevitably depletes carriers. Uniting these structural and electronic improvements at the optimal 10Ag–2Na composition,we achieve a champion power conversion efficiency of 13.1% alongside a severely reduced Voc deficit of 0.378 V. This synergisticcodoping approach offers a robust and scalable pathway for advancing high-efficiency earth-abundant thin-film photovoltaics, This study was supported by HORIZON EUROPE InnovativeEurope (101169056, 866018, CA21148), Ministerio de Ciencia yTecnología (PID2023-148976OB-C41, C44 (CURIO-CITY), PCI2023-145971-2 (ACT-FAST), PID2022-140226OB-C31, C32 (INNO-PV),PCI2024-155100-2, PCI2024-155054-2 (ENPOWER, CETP-PartnershipProgram 2023, co), and CNS2023-14817 (SELECTRON, cofunded byNextGenerationEU/PRTR), María de Maeztu Units (CEX2023-001300-M), and Departament de Salut, Generalitat de Catalunya (2021 SGR01286), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Elimination of interface energy barriers using dendrimer polyelectrolytes with fractal geometry

  • Ros Costals, Eloi
  • Tom, Thomas
  • Ortega Villasclaras, Pablo Rafael
  • Martín García, Isidro
  • Maggi, Edoardo
  • Asensi López, José Miguel
  • Lopez Vidrier, Julià
  • Saucedo Silva, Edgardo Ademar
  • Bertomeu Balagueró, Joan
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
In this work we study conjugated polyelectrolyte (CPE) films based on polyamidoamine (PAMAM) dendrimers of generations G1 and G3. These fractal macromolecules are compared to branched polyethylenimine (b-PEI) polymer using methanol as the solvent. All of these materials present a high density of amino groups, which protonated by methoxide counter-anions create strong dipolar interfaces. The vacuum level shift associated to these films on n-type silicon was 0.93 eV for b-PEI, 0.72 eV for PAMAM G1 and 1.07 eV for PAMAM G3. These surface potentials were enough to overcome Fermi level pinning, which is a typical limitation of aluminium contacts on n-type silicon. A specific contact resistance as low as 20 mO·cm2 was achieved with PAMAM G3, in agreement with the higher surface potential of this material. Good electron transport properties were also obtained for the other materials. Proof-of-concept silicon solar cells combining vanadium oxide as a hole-selective contact with these new electron transport layers have been fabricated and compared. The solar cell with PAMAM G3 surpassed 15% conversion efficiency with an overall increase of all the photovoltaic parameters. The performance of these devices correlates with compositional and nanostructural studies of the different CPE films. Particularly, a figure-of-merit (Vs) for CPE films that considers the number of protonated amino groups per macromolecule has been introduced. The fractal geometry of dendrimers leads to a geometric increase in the number of amino groups per generation. Thus, investigation of dendrimer macromolecules seems a very good strategy to design CPE films with enhanced charge-carrier selectivity., This research has received funding from the European Union H2020 Framework Programme under Grant Agreement no. 866018, Low dimensional semiconductors for optically tunable solar harvesters (SENSATE), by the Spanish Ministry of Science, Innovation and Universities under the MATERONE project (PID2020-116719RB-C41) as well as PID2019- 109215RB-C43 and PID2019-109215RB-C41. E.S. also thanks the ICREA Academia Program. One of the authors (T. Tom) acknowledges the support of the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456). This work is also part of projects PID2020-115719RB-C21 (GETPV) and TED2021-131778B (TROPIC) funded b y MCIN/AEI/10.13039/ 5011000110033. Project TED2021-131778B (TROPIC) is also funded by European Union “NextGenerationEU”/PRTR.″, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Interdigitated MgO/Au front selective contacts for enhanced photocatalytic systems based on TiO2 as light-absorber

  • Segura Blanch, Oriol
  • Ros Costals, Eloi
  • Agrelo Lestón, Asier
  • Maggi, Edoardo
  • Calvo Barrio, Lorenzo
  • Llorca Piqué, Jordi
  • Soler Turu, Lluís
  • Placidi, Marcel Jose
  • Voz Sánchez, Cristóbal
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
Selective charge extraction is a central limitation in heterogeneous photocatalysis, where short carrier diffusion lengths and interfacial recombination strongly restrict efficiency. Here we translate the photovoltaic concept of selective contacts to photocatalytic systems by designing interdigitated front architectures on a planar TiO2 absorber. Magnesium–magnesium oxide (Mg–MgOx) is used as an electron-selective layer, while gold nanoparticles act simultaneously as hole-selective contacts, plasmonic enhancers, and charge-transfer mediators toward gas-phase reactants. Interdigitated Mg–MgOx/Au patterns with controlled coverage and perimeter were fabricated on sol–gel anatase TiO2 films and tested for hydrogen production from ethanol–water vapor mixtures under UV illumination. While Au nanoparticles alone strongly enhance activity through efficient hole extraction and plasmonic effects, the addition of Mg–MgOx enables selective electron collection. However, performance is not governed by Mg–MgOx coverage alone. Samples with similar Mg–MgOx area fractions but different geometries show markedly different hydrogen production rates. To rationalize this behavior, we introduce a dimensionless geometric parameter η, defined as the normalized ratio between selective-contact perimeter and coverage. Hydrogen production follows a Langmuir–Hinshelwood-type kinetic model when expressed as a function of η, demonstrating that interfacial length, rather than area alone, controls the number of photogenerated carriers that reach adsorbed reactants before recombining. Highly interdigitated samples show up to a twofold increase in hydrogen production compared to non-patterned TiO2/Au references, despite having comparable material composition., This project received funding from the European Union’s H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain projects number PID2023-148976OBC41/C44 (CURIO-CITY) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program), PID2022-140226OB-C31C32 (INNO-PV), PID2022-138434OB-C51 (SCALING), MICIN/FEDER PID2024-156765OB-C21, PCI2024-155100-2 (ENPOWER, CETPPartnership Program 2023), funded by MCIN/AEI/10.13039/ 501100011033/FEDER, and CNS2023-14817 (SELECTRON) funded by MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR. Some of the authors from UPC belong to the Micro and Nanotechnologies for Solar Energy Group (MNT-Solar) Consolidated Research Group of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. E.S. is grateful to ICREA Academia program. J.L is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). E.R. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d’Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022., Peer Reviewed, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Polymeric interlayer in CdS-Free electron-selective contact for Sb2Se3 thin-film solar cells

  • Rovira Ferrer, David
  • Ros Costals, Eloi
  • Tom, Thomas
  • Jiménez Guerra, Maykel
  • Asensi López, José Miguel
  • Voz Sánchez, Cristóbal
  • Lopez Vidrier, Julià
  • Puigdollers i González, Joaquim
  • Bertomeu Balagueró, Joan
  • Saucedo Silva, Edgardo Ademar
High open-circuit voltage in Sb2Se3 thin-film solar cells is a key challenge in the development of earth-abundant photovoltaic devices. CdS selective layers have been used as the standard electron contact in this technology. Long-term scalability issues due to cadmium toxicity and environmental impact are of great concern. In this study, we propose a ZnO-based buffer layer with a polymer-film-modified top interface to replace CdS in Sb2Se3 photovoltaic devices. The branched polyethylenimine layer at the ZnO and transparent electrode interface enhanced the performance of Sb2Se3 solar cells. An important increase in open-circuit voltage from 243 mV to 344 mV and a maximum efficiency of 2.4% was achieved. This study attempts to establish a relation between the use of conjugated polyelectrolyte thin films in chalcogenide photovoltaics and the resulting device improvements., This research was supported by the Spanish government through grants PID2019-109215RB-C41, PID2019-109215RB-C43, and PID2020-116719RB-C41 funded by MCIN/AEI/10.13039/501100011033. This research was funded by the European Union H2020 Framework Programme under Grant Agreement No. 866018, low-dimensional semiconductors for optically tunable solar harvesters (SENSATE). E.S. acknowledges the ICREA Academia program. One of the authors (T.T.) acknowledges the support of the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456)., Peer Reviewed, Postprint (published version)