Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Monolithic Interconnection of Thin Film Minimodule Prepared by a CNC Mechanical Scribing

  • Payno, David
  • Andrade-Arvizu, Jacob
  • Miró-Llorente, Marta
  • Vidal-Fuentes, Pedro
  • Caballero, Raquel
  • Izquierdo-Roca, Víctor
  • Pérez-Rodríguez, Alejandro
3 pages, 5 figures, 1 table . -- 42nd European Photovoltaic Solar Energy Conference and Exhibition , 22-26 September, Bilbao, España, Monolithic interconnection is a key strategy for thin-film photovoltaic (PV) modules, enabling dense series-connected cell arrays without external wiring. Conventional laser scribing, however, requires complex optimization and can be unsuitable for high-melting-point or highly transparent materials. This work demonstrates a low-cost, flexible alternative based on fully mechanical scribing using a computer numerical control (CNC) system. Kesterite (Cu₂ZnSnSe₄) thin-film minimodules with Mo/CZTSe/CdS/ZnO/ITO architecture were fabricated and interconnected into an 8-cell series configuration. By selecting scribing tips of different hardness, specific layers were selectively removed without damaging underlying contacts, achieving effective P1–P2-P3 patterning. The interconnected module delivered a total open-circuit voltage of 2.65 V, consistent with the sum of individual cell voltages, while maintaining comparable current and shunt resistance. Main performance losses arose from increased series resistance and reduced active area, limiting power conversion efficiency to 2% for the module, 3.1% for the module active area, versus a efficiency of 6% for an individual reference cell. These results highlight mechanical scribing as a practical method for early-stage PV technologies and a potential complement to laser scribing in industrial applications, This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 952982 (Custom-Art) and the Project ASSESS (TED2021-129666B-C21) funded by MCIN/AEI/ 10.13039/501100011033, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Gradient doping in Cu2ZnSnSe4 by temperature and potential induced defect steering

  • Jiménez Arguijo, Alex|||0000-0002-3583-0958
  • Caño Prades, Ivan|||0000-0003-4226-1527
  • Atlan, Fabien
  • Gong, Yuancai|||0000-0003-3548-9064
  • Tiwari, Kunal Jogendra|||0000-0002-1126-2634
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Jehl Li-Kao, Zacharie
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Giraldo Muñoz, Sergio|||0000-0003-4881-5041
Kesterite materials are among the most promising emerging photovoltaic absorbers, despite the number of challenging issues this technology presents. The use of soft thermal post-deposition treatments is key to improving the CdS/kesterite interface quality. Thermal treatments can result in a low-temperature phase transition which affects the optoelectronic properties. In this work, the effects of applied voltage during a full device thermal post-deposition treatments above the critical temperature of the phase transition are explored. The applied voltage modifies the formation energy and drives in-depth migration of ionized defects, which can generate a shallow doping density gradient. Supporting the experimental findings, the effects of a shallow doping density gradient on the current–voltage curves and the external quantum efficiency are modelled using drift–diffusion calculations. The presence of bulk recombination centers in the modelling is a key aspect to precisely reproduce the experimental results. The shallow doping density gradient in opposite directions precisely matches the experimental results for opposite voltage polarizations. The effects on the band structure of the device are presented proving this as a promising strategy for improving charge carrier selectivity. This is the first time that a defect engineering approach has been proposed and successfully proven to control shallow doping density profiling and improve the charge carrier selectivity of kesterite devices. In this sense, the results and their thorough physical interpretation presented in this work will potentially open new perspectives in other photovoltaic technologies as well as in the field of materials engineering., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 952982 (CUSTOM-ART). Authors from IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the “Generalitat de Catalunya” (Ref. 2017 SGR 862)”. M.P. and Z.J. acknowledge the financial support from Spanish Ministry of Science, Innovation and Universities within the Ramon y Cajal (RYC2017–23758 and RYC2021-033239-I) program. A.J.A. thanks the European Social 40 Fund for the FI fellowship. I.C. acknowledges UPC and Banco Santander for the FPI-UPC scholarship (2021 FPI-UPC_060). S.G thanks the grant IJC2020-044716-I funded 41 by MCIN/AEI/10.13039/ 501100011033 and by the European Union 42 NextGenerationEU/ PRTR. E.S. is grateful to ICREA Academia program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hole Transport Layer based on atomic layer deposited V2Ox films: paving the road to semi-transparent CZTSe solar cells

  • Almache Hernández, Rosa Estefanía|||0000-0002-3172-5026
  • Pusay Villarroel, Benjamín Andrés
  • Tiwari, Kunal Jogendra|||0000-0002-1126-2634
  • Ros, Eloi
  • Masmitjà Rusiñol, Gerard|||0000-0001-9541-7586
  • Becerril Romero, Ignacio
  • Martín García, Isidro|||0000-0001-8833-9057
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work explores the use of very thin transparent vanadium oxide films deposited by atomic layer deposition (ALD) technique as hole transport layer for CZTSe solar cells as alternative of opaque molybdenum based contacts. Contact resistivity between the CZTSe absorber and the ALD V2Ox contact was measured. In order to improve contact quality, a cleaning bath using hydrofluoric acid (HF) dip, was also analyzed and its influence on kesterite surface was studied. Elementary material characterization and composition analysis of the V2Ox layers was performed. Contact quality was assessed yielding contact resistivity values below 9 and 30 mOcm2 for ALD and thermal evaporated V2Ox films respectively. The proposed ALD V2Ox based hole transport layer was deposited onto a glass covered with a transparent conductive oxide forming part of the rear contact scheme of a vertical CZTSe solar cell with a conventional ITO/CdS stack as electron transport layer. The impact of subsequent thermal post-annealing treatments in the cell performance was also analyzed yielding efficiency up to 3.9% on a semi-transparent CZTSe solar cell without any additional optimization process. In this way, a CZTSe solar cell with both transparent electrodes has been demonstrated paving the way to obtain in the future high efficiency bifacial and/or semitransparent Building –integrated photovoltaic devices., Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopias Avanzadas" at Universidad de Zaragoza; moreover, this work has been supported by the Ecuadorian government grants SENESCYT (BECAS DE POSGRADOS INTERNACIONALES 2018), Spanish Government through projects IGNITE (ENE2017-87671-C3-2-R) - SCALED (PID2019-109215RB-C41) and the European Research Council Grant Horizon 2020 CUSTOM-ART project (Grant agreement ID: 952982) and Ministerio de Ciencia e Innovación, grant number PID2020-116719RB-C41, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac|||0009-0005-5699-466X
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel|||0000-0002-0890-0842
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • de Benito, Carola
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Impact of vapor phase Ge incorporation and reaction pathways on the performance and stability of Cu2Zn(Ge,Sn)Se4 solar cells

  • Khonsor, Talat
  • Nowak, David
  • Pareek, Devendra
  • Guc, Maxim|||0000-0002-2072-9566
  • Fonoll Rubio, Robert
  • Izquierdo Roca, Víctor
  • Vidal Fuentes, Pedro
  • Gütay, Levent|||0000-0002-7626-8586
In this study, we investigate how variations in precursor composition and partial vapor-assisted substitution of Sn by Ge affect the material quality and device performance of CZTGSe solar cells. Precursor films with different Cu–Sn alloy ratios were selenized under controlled SnSe2-x and GeSe2-x vapor conditions, enabling the synthesis of Cu2ZnSn1-xGexSe4 absorber layers with Ge/(Ge + Sn) ratios ranging from 0 to 36%. Despite the initial variations, the final absorber compositions converged due to in-process shifts driven by Sn and/or Ge incorporation and loss during the reaction. Beyond the established role of the absorber composition, we show that the reaction pathway, determined by the precursor composition, strongly influences the defect concentration, material quality, and device performance. A Cu-rich and Sn-poor (Cu/Sn > 2) starting composition that evolves into a Cu-poor Sn-rich kesterite absorber is found to be particularly beneficial. Furthermore, prolonged post deposition treatment revealed distinct stability trends: Ge-free devices degraded steadily, whereas Ge-containing devices continued to improve over ~430 hours. We attribute this to stabilization of [VCu + ZnCu] defect clusters and re-distribution of Ge atoms. The best-performing device, with Ge/(Ge + Sn) = 9% achieved 12.5% efficiency with enhanced long-term stability, underscoring the potential of vapor-phase Ge integration for advancing physically synthesized kesterite solar cells., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 952982 (“Custom-Art”). Also, this work is part of the project SCALING (PID2022-138434OB-C52) funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. This work is part of the project InnoPV (ref. PID2022-140226OB-C31) funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. This work is part of the project CURIO-CITY (PID2023-148976OB-C42) está financiado por MCIN/AEI/10.13039/501100011033/FEDER, UE. The authors from IREC belong to the MNT-Solar Consolidated Research Group of the “Generalitat de Catalunya” (ref. 2021 SGR 01286) and acknowledge support from European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013). M. G. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and from FSE+ within the Ramón y Cajal (RYC2022-035588-I) program. T. K. thanks the Hans-Böckler-Stiftung for the scholarship and for supporting this work., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A circuital model of Sb2Se3 solar cells as memdiode devices for neuromorphic applications

  • Vega Bru, Didac
  • Picos, Rodrigo
  • Rodríguez Martínez, Ángel
  • Gupta, Yash
  • Camps, Oscar
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
  • de Benito, Carola
  • Llorca Piqué, Jordi
  • Stavrinides, Stavros G.
Memristors are one of the four fundamental electrical components, relating electrical quantities such as current, voltage, charge (integral of current), and flux (integral of voltage). First proposed in 1971 and experimentally demonstrated in 2009, memristors have garnered significant research interest due to their unique properties. Among their many applications, neuromorphic computing and memory storage stand out. However, memristive behavior is not limited to standalone devices; it can also manifest as a parasitic effect in various systems. Despite this, research on parasitic memristive effects remains limited, especially when compared to studies on resistors and capacitors. In this work, we present experimental evidence demonstrating that a Mo/MoSe2/Sb2Se3 (10 nm)/CdS (2 nm)/indium titanium oxide (ITO) substrate configuration, originally designed as a solar cell, exhibits memristive behavior. This behavior is investigated by applying both triangular waveforms and a series of voltage pulses to the solar cell contacts while recording the current transient response. Our proposed model builds upon the standard single-diode solar cell model, with modifications to incorporate the observed memristive effects as second-order, parasitic elements. The experimental data show that the proposed model fits well with the experimental results, confirming the memristive behavior in the system., This work was supported in part by the European Union’s H2020 Research and Innovation Program under Grant 952982 (CUSTOM-ART) and Grant 866018 (SENSATE); and in part by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under Project PID2021-124572OBC31 (HYNTERCAT), Project PID2020-116719RB-C41 (MATER-ONE), Project TED2021-130265B-C21 (MIRACLE), and Project PID2022- 139586NB-CB41., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Gradient doping in Cu2ZnSnSe4 by temperature and potential induced defect steering

  • Jiménez Arguijo, Alex
  • Caño Prades, Ivan
  • Atlan, Fabien
  • Gong, Yuancai
  • Tiwari, Kunal Jogendra
  • Placidi, Marcel Jose
  • Puigdollers i González, Joaquim
  • Jehl Li-Kao, Zacharie
  • Saucedo Silva, Edgardo Ademar
  • Giraldo Muñoz, Sergio
Kesterite materials are among the most promising emerging photovoltaic absorbers, despite the number of challenging issues this technology presents. The use of soft thermal post-deposition treatments is key to improving the CdS/kesterite interface quality. Thermal treatments can result in a low-temperature phase transition which affects the optoelectronic properties. In this work, the effects of applied voltage during a full device thermal post-deposition treatments above the critical temperature of the phase transition are explored. The applied voltage modifies the formation energy and drives in-depth migration of ionized defects, which can generate a shallow doping density gradient. Supporting the experimental findings, the effects of a shallow doping density gradient on the current–voltage curves and the external quantum efficiency are modelled using drift–diffusion calculations. The presence of bulk recombination centers in the modelling is a key aspect to precisely reproduce the experimental results. The shallow doping density gradient in opposite directions precisely matches the experimental results for opposite voltage polarizations. The effects on the band structure of the device are presented proving this as a promising strategy for improving charge carrier selectivity. This is the first time that a defect engineering approach has been proposed and successfully proven to control shallow doping density profiling and improve the charge carrier selectivity of kesterite devices. In this sense, the results and their thorough physical interpretation presented in this work will potentially open new perspectives in other photovoltaic technologies as well as in the field of materials engineering., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 952982 (CUSTOM-ART). Authors from IREC belong to the SEMS (Solar Energy Materials and Systems) Consolidated Research Group of the “Generalitat de Catalunya” (Ref. 2017 SGR 862)”. M.P. and Z.J. acknowledge the financial support from Spanish Ministry of Science, Innovation and Universities within the Ramon y Cajal (RYC2017–23758 and RYC2021-033239-I) program. A.J.A. thanks the European Social 40 Fund for the FI fellowship. I.C. acknowledges UPC and Banco Santander for the FPI-UPC scholarship (2021 FPI-UPC_060). S.G thanks the grant IJC2020-044716-I funded 41 by MCIN/AEI/10.13039/ 501100011033 and by the European Union 42 NextGenerationEU/ PRTR. E.S. is grateful to ICREA Academia program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hole Transport Layer based on atomic layer deposited V2Ox films: paving the road to semi-transparent CZTSe solar cells

  • Almache Hernández, Rosa Estefanía
  • Pusay Villarroel, Benjamín Andrés
  • Tiwari, Kunal Jogendra
  • Ros, Eloi
  • Masmitjà Rusiñol, Gerard
  • Becerril Romero, Ignacio
  • Martín García, Isidro
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
  • Saucedo Silva, Edgardo Ademar
  • Ortega Villasclaras, Pablo Rafael
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work explores the use of very thin transparent vanadium oxide films deposited by atomic layer deposition (ALD) technique as hole transport layer for CZTSe solar cells as alternative of opaque molybdenum based contacts. Contact resistivity between the CZTSe absorber and the ALD V2Ox contact was measured. In order to improve contact quality, a cleaning bath using hydrofluoric acid (HF) dip, was also analyzed and its influence on kesterite surface was studied. Elementary material characterization and composition analysis of the V2Ox layers was performed. Contact quality was assessed yielding contact resistivity values below 9 and 30 mOcm2 for ALD and thermal evaporated V2Ox films respectively. The proposed ALD V2Ox based hole transport layer was deposited onto a glass covered with a transparent conductive oxide forming part of the rear contact scheme of a vertical CZTSe solar cell with a conventional ITO/CdS stack as electron transport layer. The impact of subsequent thermal post-annealing treatments in the cell performance was also analyzed yielding efficiency up to 3.9% on a semi-transparent CZTSe solar cell without any additional optimization process. In this way, a CZTSe solar cell with both transparent electrodes has been demonstrated paving the way to obtain in the future high efficiency bifacial and/or semitransparent Building –integrated photovoltaic devices., Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopias Avanzadas" at Universidad de Zaragoza; moreover, this work has been supported by the Ecuadorian government grants SENESCYT (BECAS DE POSGRADOS INTERNACIONALES 2018), Spanish Government through projects IGNITE (ENE2017-87671-C3-2-R) - SCALED (PID2019-109215RB-C41) and the European Research Council Grant Horizon 2020 CUSTOM-ART project (Grant agreement ID: 952982) and Ministerio de Ciencia e Innovación, grant number PID2020-116719RB-C41, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Impact of vapor phase Ge incorporation and reaction pathways on the performance and stability of Cu2Zn(Ge,Sn)Se4 solar cells

  • Khonsor, Talat
  • Nowak, David
  • Pareek, Devendra
  • Guc, Maxim
  • Fonoll Rubio, Robert
  • Izquierdo Roca, Víctor
  • Vidal Fuentes, Pedro
  • Gütay, Levent
In this study, we investigate how variations in precursor composition and partial vapor-assisted substitution of Sn by Ge affect the material quality and device performance of CZTGSe solar cells. Precursor films with different Cu–Sn alloy ratios were selenized under controlled SnSe2-x and GeSe2-x vapor conditions, enabling the synthesis of Cu2ZnSn1-xGexSe4 absorber layers with Ge/(Ge + Sn) ratios ranging from 0 to 36%. Despite the initial variations, the final absorber compositions converged due to in-process shifts driven by Sn and/or Ge incorporation and loss during the reaction. Beyond the established role of the absorber composition, we show that the reaction pathway, determined by the precursor composition, strongly influences the defect concentration, material quality, and device performance. A Cu-rich and Sn-poor (Cu/Sn > 2) starting composition that evolves into a Cu-poor Sn-rich kesterite absorber is found to be particularly beneficial. Furthermore, prolonged post deposition treatment revealed distinct stability trends: Ge-free devices degraded steadily, whereas Ge-containing devices continued to improve over ~430 hours. We attribute this to stabilization of [VCu + ZnCu] defect clusters and re-distribution of Ge atoms. The best-performing device, with Ge/(Ge + Sn) = 9% achieved 12.5% efficiency with enhanced long-term stability, underscoring the potential of vapor-phase Ge integration for advancing physically synthesized kesterite solar cells., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 952982 (“Custom-Art”). Also, this work is part of the project SCALING (PID2022-138434OB-C52) funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. This work is part of the project InnoPV (ref. PID2022-140226OB-C31) funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. This work is part of the project CURIO-CITY (PID2023-148976OB-C42) está financiado por MCIN/AEI/10.13039/501100011033/FEDER, UE. The authors from IREC belong to the MNT-Solar Consolidated Research Group of the “Generalitat de Catalunya” (ref. 2021 SGR 01286) and acknowledge support from European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007–2013). M. G. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and from FSE+ within the Ramón y Cajal (RYC2022-035588-I) program. T. K. thanks the Hans-Böckler-Stiftung for the scholarship and for supporting this work., Peer Reviewed, Postprint (published version)