Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

BAFFI: a bit-accurate fault injector for improved dependability assessment of FPGA prototypes

  • Tuzov, Ilya|||0000-0002-1980-0708
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
  • Hernández Luz, Carles|||0000-0003-1192-6223
[EN] FPGA-based fault injection (FFI) is an indispensable technique for verification and dependability assessment of FPGA designs and prototypes. Existing FFI tools make use of Xilinx essential bits technology to locate the relevant fault targets in FPGA configuration memory (CM). Most FFI tools treat essential bits as black-box, while few of them are able to filter essential bits on the area basis in order to selectively target design components contained within the predefined Pblocks. This approach, however, remains insufficiently precise since the granularity of Pblocks in practice does not reach the smallest design components. This paper proposes an open-source FFI tool that enables much more fine-grained FFI experiments for Xilinx 7-series and Ultrascale+ FPGAs. By mapping the essential bits with the hierarchical netlist, it allows to precisely target any component in the design tree, up to an individual LUT or register, without the need for defining Pblocks (floorplanning). With minimal experimental effort it estimates the contribution of each DUT component into the resulting dependability features, and discovers weak points of the DUT. Through case studies we show how the proposed tool can be applied to different kinds of DUTs: from small-footprint microcontrollers, up to multicore RISC-V SoC. The correctness of FFI results is validated by means of RT-level and gate-level simulation-based fault injection., This work has received funding from (i) ECSEL Joint Undertaking (JU) under grant agreement No 877056, (ii) Agencia Estatal de Investigacion from Spain under grant agreement no. PCI2020-112092, (iii) European Unions Horizon 2020 research and innovation programme under grant agreement no. 871467, and (iv) Grant PID2020-120271RB-I00 funded by MCIN/AEI/ 10.13039/501100011033. Carles Hernandez is partially supported by Spanish Ministry of Science, Innovation and Universities under Ramon y Cajal, fellowship No. RYC2020-030685-I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

HPC Platform for Railway Safety-Critical Functionalities Based on Artificial Intelligence

  • Labayen, Mikel
  • Eizaguire, Fernando
  • Aginako, Naiara
  • L. Medina-Chaveli|||0000-0001-5954-0261
  • Flich Cardo, José
[EN] The automation of railroad operations is a rapidly growing industry. In 2023, a new European standard for the automated Grade of Automation (GoA) 2 over European Train Control System (ETCS) driving is anticipated. Meanwhile, railway stakeholders are already planning their research initiatives for driverless and unattended autonomous driving systems. As a result, the industry is particularly active in research regarding perception technologies based on Computer Vision (CV) and Artificial Intelligence (AI), with outstanding results at the application level. However, executing high-performance and safety-critical applications on embedded systems and in real-time is a challenge. There are not many commercially available solutions, since High-Performance Computing (HPC) platforms are typically seen as being beyond the business of safety-critical systems. This work proposes a novel safety-critical and high-performance computing platform for CV- and AI-enhanced technology execution used for automatic accurate stopping and safe passenger transfer railway functionalities. The resulting computing platform is compatible with the majority of widely-used AI inference methodologies, AI model architectures, and AI model formats thanks to its design, which enables process separation, redundant execution, and HW acceleration in a transparent manner. The proposed technology increases the portability of railway applications into embedded systems, isolates crucial operations, and effectively and securely maintains system resources., The novel approach presented in this work is being developed as a specific railway use case for autonomous train operation into SELENE European research project. This project has received funding from RIA Research and Innovation action under grant agreement No. 871467.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

HP-DCFNoC: High Performance Distributed Dynamic TDM Scheduler Based on DCFNoC Theory

  • Picornell-Sanjuan, Tomás
  • Duato Marín, José Francisco
  • Flich Cardo, José
  • Hernández Luz, Carles|||0000-0003-1192-6223
[EN] The need for increasing the performance of critical real-time embedded systems pushes the industry to adopt complex multi-core processor designs with embedded networks-on-chip. In this paper we present hp-DCFNoC, a distributed dynamic scheduler design that by relying on the key properties of a delayed confict-free NoC (DCFNoC) is able to achieve peak performance numbers very close to a wormhole-based NoC design without compromising its real-time guarantees. In particular, our results show that the proposed scheduler achieves an overall throughput improvement of 6.9x and 14.4x over a baseline DCFNoC for 16 and 64-node meshes, respectively. When compared against a standard wormhole router 95% of its network throughput is preserved while strict timing predictability as property is kept. This achievement opens the door to new high performance time predictable NoC designs., This work was supported in part by the Secretara de Estado de Investigacin Desarrollo e Innovacin (MINECO) under Grant BES-2016-076885, in part by the European Regional Development Fund (ERDF) under Grant TIN2015-66972-C05-1-R and Grant RTI2018-098156-B-C51, and in part by the EC H2020 European Institute of Innovation and Technology (SELENE) Project under Grant 871467.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Improving the Robustness of Redundant Execution with Register File Randomization

  • Tuzov, Ilya|||0000-0002-1980-0708
  • Andreu-Cerezo, Pablo|||0000-0003-2070-9271
  • L. Medina-Chaveli|||0000-0001-5954-0261
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
  • Flich Cardo, José
  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Picornell-Sanjuan, Tomás
  • Robles Martínez, Antonio
[EN] Staggered Redundant execution (SRE) is a fault-tolerance mechanism that has been widely deployed in the context of safety-critical applications. SRE not only protects the system in the presence of faults but also helps relaxing safety requirements of individual elements. However, in this paper, we show that SRE does not effectively protect the system against a wide range of faults and thus, new mechanisms to increase the diversity of homogeneous cores are needed. In this paper, we propose Register File Randomization (RFR), a low-cost diversity mechanism that significantly increases the robustness of homogeneous multicores in front of common-cause faults (CCFs) and register file wearout. Our results show that RFR completely removes the failure rate for register file CCFs for certain workloads and reduces by a factor of 5X the impact of stress related register file aging for the workloads analysed. Our implementation requires less than 50 RTL lines of code and the area (FPGA logic) overhead of RFR is less than 0.2% of a 64-bit RISC-V core FPGA implementation., This work has received funding from the ECSEL Joint Undertaking (JU) under grant agreement No 877056 and the Agencia Estatal de Investigacion from Spain under grant agreement no. PCI2020-112092, and from the the European Unions Horizon 2020 research and innovation programme under grant agreement no. 871467.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

SELENE: Self-Monitored Dependable Platform for High-Performance Safety-Critical Systems.

  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Flich Cardo, José
  • Paredes Palacios, Roberto
  • Lefebvre, Charles-Alexis
  • Allende, Imanol
  • Abella, Jaume
  • Trilla, David
  • Matschnig, Martin
  • Fischer, Bernhard
  • Schwarz, Konrad
  • Kiszka, Jan
  • Ronnback, Martin
  • Klockars, Johan
  • McGuire, Nicholas
  • Rammerstorfer, Franz
[EN] Existing HW/SW platforms for safety-critical systems suffer from limited performance and/or from lack of flexibility due to building on specific proprietary components. This jeopardizes their wide deployment across domains. While some research has been done to overcome these limitations, they have had limited success owing to missing flexibility and extensibility. Flexibility and extensibility are the cornerstones of industry adoption: industries dealing in capital goods need technologies on which they can rely on during decades (e.g. avionics, space, automotive). SELENE aims at covering this gap by proposing a new family of safety-critical computing platforms, which builds upon open source components such as the RISC-V instruction set architecture, GNU/Linux, and the Jailhouse hypervisor. SELENE will develop an advanced computing platform that is able to: (1) adapt the system to the specific requirements of different application domains, to changing environmental conditions, and to internal conditions of the system itself; (2) allow the integration of applications of different criticalities and performance demands in the same platform, guaranteeing functional and temporal isolation properties; (3) achieve flexible diverse redundancy by exploiting the inherent redundant capabilities of the multicore; and (4) efficiently execute compute-intensive applications by means of specific accelerators., This work has received funding from the European Unions Horizon 2020 research and innovation programme under grant agreement no. 871467.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Automatic Detection of Epileptic Seizures with Recurrent and Convolutional Neural Networks

  • Carrión-Ponz, Salvador
  • López-Chilet, Álvaro
  • Martínez-Bernia, Javier
  • Coll-Alonso, Joan
  • Chorro-Juan, Daniel
  • Gomez, J.A.|||0000-0002-4174-3762
[EN] Computer-aided diagnosis based on intelligent systems is an effective strategy to improve the efficiency of healthcare systems while reducing their costs. In this work, the epilepsy detection task is approached in two different ways, recurrent and convolutional neural networks, within a patient-specific scheme. Additionally, a detector function and its effects on seizure detection performance are presented. Our results suggest that it is possible to detect seizures from scalp EEGs with acceptable results for some patients, and that the DeepHealth framework is a proper deep learning software for medical research., This project has received funding from the European Commission -Horizon 2020 (H2020) under the DeepHealth Project (grant agreement no 825111), and the SELENE project (grant agreement no 871467).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

HPC Platform for Railway Safety-Critical Functionalities Based on Artificial Intelligence

  • Labayen Esnaola, Mikel
  • Medina, Laura
  • Eizaguirre, Fernando
  • Flich, José
  • Aginako Bengoa, Naiara
The automation of railroad operations is a rapidly growing industry. In 2023, a new European standard for the automated Grade of Automation (GoA) 2 over European Train Control System (ETCS) driving is anticipated. Meanwhile, railway stakeholders are already planning their research initiatives for driverless and unattended autonomous driving systems. As a result, the industry is particularly active in research regarding perception technologies based on Computer Vision (CV) and Artificial Intelligence (AI), with outstanding results at the application level. However, executing high-performance and safety-critical applications on embedded systems and in real-time is a challenge. There are not many commercially available solutions, since High-Performance Computing (HPC) platforms are typically seen as being beyond the business of safety-critical systems. This work proposes a novel safety-critical and high-performance computing platform for CV- and AI-enhanced technology execution used for automatic accurate stopping and safe passenger transfer railway functionalities. The resulting computing platform is compatible with the majority of widely-used AI inference methodologies, AI model architectures, and AI model formats thanks to its design, which enables process separation, redundant execution, and HW acceleration in a transparent manner. The proposed technology increases the portability of railway applications into embedded systems, isolates crucial operations, and effectively and securely maintains system resources., The novel approach presented in this work is being developed as a specific railway use case for autonomous train operation into SELENE European research project. This project has received funding from RIA—Research and Innovation action under grant agreement No. 871467.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

SafeSU-2: a safe statistics unit for space MPSoCs

  • Cabo Pitarch, Guillem
  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Hernández Luz, Carles
  • Benedicte Illescas, Pedro|||0000-0003-1670-7783
  • Bas Jalón, Francisco
  • Mazzocchetti, Fabio
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
Advanced statistics units (SUs) have been proven effective for the verification, validation and implementation of safety measures as part of safety-related MPSoCs. This is the case, for instance, of the RISC-V MPSoC by CAES Gaisler based on NOEL-V cores that will become commercially ready on FPGAs by the end of 2022. However, while those SUs support safety in the rest of the SoC, they must be built to be safe to be part of commercial products. This paper presents the SafeSU-2, the safety-compliant version of the SafeSU. In particular, we perform a Failure Mode and Effect Analysis (FMEA) for the SafeSU for relevant fault models, and implement fault detection and tolerance features needed to make it compliant with the requirements of safety-related devices in general, and of space MPSoCs in particular., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 871467. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GBC21/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

On the reliability of hardware event monitors in MPSoCs for critical domains

  • Barrera Herrera, Javier Enrique|||0000-0003-1469-2514
  • Kosmidis, Leonidas
  • Tabani, Hamid
  • Mezzetti, Enrico|||0000-0002-1886-2931
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
  • Fernández, Mikel
  • Bernat Nicolau, Guillem Joan
  • Cazorla Almeida, Francisco Javier
Performance Monitoring Units (PMUs) are at the heart of most-advanced timing analysis techniques to control and bound the impact of contention in Commercial Off-The-Shelf (COTS) SoCs with shared resources (e.g. GPUs and multicore CPUs). In this paper, we report discrepancies on the values obtained from the PMU event monitors and the number of events expected based on PMU event description in the processor's official documentation. Discrepancies, which may be either due to actual errors or inaccurate specifications, make PMU readings unreliable. This is particularly problematic in consideration of the critical role played by event monitors for timing analysis in domains such as automotive and avionics. This paper proposes a systematic procedure for event monitor validation. We apply it to validate event monitors in the NVIDIA Xavier and TX2, and the Zynq UltraScale+ MPSoC. We show that, while some event monitors count as expected, this is not the case for others whose discrepancies with expected values we analyze., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant TIN2015-65316-P, the SELENE European Union’s Horizon 2020 (H2020) research and innovation programme under grant agreement No 871467, and the HiPEAC Network of Excellence. MINECO partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717), Enrico Mezzetti under Juan de la-Cierva-Incorporacion postdoctoral fellowship (IJCI-2016-27396), and Leonidas Kosmidis under Juan de la Cierva-Formacion postdoctoral fellowship (FJCI-2017-34095)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

SELENE: Self-Monitored Dependable Platform for High-Performance Safety-Critical Systems

  • Hernández, Carles
  • Flieh, Jose
  • Paredes, Roberto
  • Lefebvre, Charles-Alexis
  • Allende, Imanol
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
  • Trillin, David
  • Matschnig, Martin
  • Fischer, Bernhard
  • Schwarz, Konrad
  • Kiszka, Jan
  • Rönnbäck, Martin
  • Klockars, Johan
  • Mc Guire, Nicholas
  • Rammerstorfer, Franz
  • Schwarzl, Christian
  • Wartet, Franck
  • Lüdemann, Dierk
  • Labayen, Mikel
Existing HW/SW platforms for safety-critical systems suffer from limited performance and/or from lack of flexibility due to building on specific proprietary components. This jeopardizes their wide deployment across domains. While some research has been done to overcome these limitations, they have had limited success owing to missing flexibility and extensibility. Flexibility and extensibility are the cornerstones of industry adoption: industries dealing in capital goods need technologies on which they can rely on during decades (e.g. avionics, space, automotive). SELENE aims at covering this gap by proposing a new family of safety-critical computing platforms, which builds upon open source components such as the RISC-V instruction set architecture, GNU/Linux, and the Jailhouse hypervisor. SELENE will develop an advanced computing platform that is able to: (1) adapt the system to the specific requirements of different application domains, to changing environmental conditions, and to internal conditions of the system itself; (2) allow the integration of applications of different criticalities and performance demands in the same platform, guaranteeing functional and temporal isolation properties; (3) achieve flexible diverse redundancy by exploiting the inherent redundant capabilities of the multicore; and (4) efficiently execute compute-intensive applications by means of specific accelerators., This work has received funding from the European Unions Horizon 2020 research and innovation programme under grant agreement no. 871467., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

End-to-end QoS for the open source safety-relevant RISC-V SELENE platform

  • Andreu Cerezo, Pablo
  • Hernández Luz, Carles
  • Picornell Sanjuan, Tomás
  • López Rodríguez, Pedro
  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Bas Jalón, Francisco
  • Benedicte Illescas, Pedro|||0000-0003-1670-7783
  • Chang, Feng
  • Cabo Pitarch, Guillem
  • Fuentes Díaz, Francisco Javier
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
This paper presents the end-to-end QoS approach to provide performance guarantees followed in the SELENEplatform, a high-performance RISC-V based heterogeneous SoC for safety-related real-time systems. Our QoS approach includes smart interconnect solutions for buses and NoCs, along with multicore interference-aware statistics units to, cooperatively, achieve end-to-end QoS., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 871467. BSC work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB-C21/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

SafeX: Open source hardware and software components for safety-critical systems

  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Cabo Pitarch, Guillem
  • Bas Jalón, Francisco
  • Benedicte Illescas, Pedro|||0000-0003-1670-7783
  • Fuentes Díaz, Francisco Javier
  • Chang, Feng
  • Lasfar, Ilham
  • Canal Corretger, Ramon|||0000-0003-4542-204X
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
RISC-V Instruction Set Architecture (ISA) emerges as an opportunity to develop open source hardware without being subject to expensive licenses or export restrictions. A plethora of initiatives are nowadays developing systems-on-chip (SoCs) and its components based on RISC-V targeting a wide variety of markets. However, domains with safety requirements, such as avionics, space, and automotive, impose SoCs to include support to meet those requirements.This work introduces the SafeX family of components, a set of components providing SoC controllability, observability and safety measures support. These components, developed by the Barcelona Supercomputing Center with permissive open source licenses, are intended to be the basis to make SoCs meet the needs of domains with safety requirements. In particular, the SafeX components developed so far include the SafeSU (multicore statistics unit), the SafeTI (flexible and programmable traffic injector), the SafeDE and SafeSoftDR (hardware and software modules to enforce lockstep execution), and the SafeDM (module to monitor diversity across cores)., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 871467. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB-C21 funded by MCIN/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

SafeDE: A low-cost hardware solution to enforce diverse redundancy in multicores

  • Bas Jalón, Francisco
  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Cabo Pitarch, Guillem
  • Benedicte Illescas, Pedro|||0000-0003-1670-7783
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
Failure risk must be tiny in high-integrity systems, such as those in cars, satellites and aircraft. Hence, safety measures must be deployed to avoid a single fault leading to a failure. Redundancy has been often used to address this concern, but it has been proven insufficient if a single fault can cause the same error in all redundant elements, which defeats the purpose of redundancy for error detection. Hence, to avoid this scenario, diversity is implemented along with redundancy, being lockstep execution the most popular diverse redundancy solution for computing cores. However, classic lockstep solutions have non-negligible limitations if implemented in hardware (e.g., half of the cores can only be used for redundant execution and are not even visible at user level), or in software (e.g., the software loop to enforce staggering is long and costs performance). This paper tackles the limitations of classic lockstep solutions by providing an extended analysis and evaluation of SafeDE, a Diversity Enforcement hardware module combining the short loop to enforce diversity of hardware solutions, and the nonintrusiveness of software solutions. Hence, cores can operate in lockstep mode efficiently or run independent tasks. In this paper, we present SafeDE and its rationale, its application to N-modular systems, its hardware and software integration, and an evaluation showing its performance and area efficiency, and its behavior in the presence of faults., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme under Grant 871467, and in part by the Spanish Ministry of Science and Innovation under Grant PID2019-107255GB-C21/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

SafeTI: a hardware traffic injector for MPSoC functional and timing validation

  • Sala Sucarrats, Oriol
  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Cabo Pitarch, Guillem
  • Bas Jalón, Francisco
  • Lorenzo Ortega, Rubén
  • Benedicte Illescas, Pedro|||0000-0003-1670-7783
  • Trilla Rodríguez, David
  • Gil Rodríguez, Guillermo
  • Mazzocchetti, Fabio
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
Functional and timing validation of safety-related MPSoCs requires testing specific traffic patterns in the on-chip interconnects. Generally, testing needs to be performed by using software tests whose degree of control on the traffic generated is indirect, and limited to behavior that can be triggered by software, thus often unable to produce traffic generated by peripherals. Therefore, untested traffic scenarios can be abundant and, to a large extent, it is hard to know what traffic scenarios have been effectively tested. This paper presents the safe traffic injector, SafeTI, which allows injecting programmable traffic in AMBA AHB interconnects with high flexibility and degree of control, thus easing achieving high coverage in terms of traffic scenarios tested, and mitigating the uncertainty due to the difficulties to relate software tests with actual traffic scenarios tested. We also integrate successfully the SafeTI in an industrial MPSoC for the space domain proving the effectiveness of the proposed traffic injector., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 871467. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Software-only triple diverse redundancy on GPUs for autonomous driving platforms

  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Kosmidis, Leonidas
  • Hernández Luz, Carles
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
Autonomous driving (AD) imposes the need for safe computations in high-performance computing (HPC) components such as GPUs, thus with capabilities to detect and recover from errors since a safe state may not exist anymore. This can be achieved with Triple Modular Redundancy (TMR) for computation components. Furthermore, error detection capabilities need to provide some form of diversity to avoid the case where a single fault leads all redundant executions lead to the same error, which would go undetected. In our past work, we assessed GPUs against dual modular redundancy (DMR) with diversity, showing their potential and limitations to provide diverse redundancy building on reset and restart for recovery. However, such recovery scheme may be too slow for some applications. This paper proposes a software-only solution to deliver diverse TMR on commercial off-the-shelf (COTS) GPUs. Our work details how staggered execution can be achieved and assesses the performance of TMR on COTS GPUs. Moreover, we identify those elements where diversity cannot be guaranteed and provide some discussion comparing the case of DMR and TMR for those elements., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 871467 (SELENE). Leonidas Kosmidis has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under a Juan de la Cierva Formacion postdoctoral fellowship with number FJCI-2017-34095., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Security, reliability and test aspects of the RISC-V ecosystem

  • Abella Ferrer, Jaume|||0000-0001-7951-4028
  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Anders, Jens
  • Bas Jalón, Francisco
  • Becker, Steffen
  • De Mulder, Elke
  • Elhamawy, Nourhan
  • Gürkaynak, Frank K.
  • Handschuh, Helena
  • Hernández Luz, Carles
  • Hutter, Mike
  • Kosmidis, Leonidas
  • Polian, Ilia
  • Sauer, Matthias
  • Wagner, Stefan
  • Regazzoni, Francesco
RISC-V has emerged as a viable solution on academia and industry. However, to use open source hardware for safety-critical applications, we need a deep understanding of the way in which well established mechanisms for testing and reliability could be integrated and deployed on the RISCV ecosystem, and we need a clear knowledge on how such an ecosystem can be leveraged to improve security. This paper includes four contributions presenting the potential of RISC-V in security research, the way in which RISC-V can be hardened against power analysis attacks, how to implement, using RISCV, software and hardware/software solutions for dual core lock step, and how to perform system-level testing in the RISC-V ecosystem., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

SafeDE: a flexible Diversity Enforcement hardware module for light-lockstepping

  • Bas Jalón, Francisco
  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Lorenzo Ortega, Rubén
  • Cabo Pitarch, Guillem
  • Gil Rodríguez, Guillermo
  • Sala Sucarrats, Oriol
  • Mazzocchetti, Fabio
  • Trilla Rodríguez, David
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
Safety-related systems, such as those in automotive, avionics and space, impose the existence of appropriate safety measures to meet the safety requirements of the system. In the case of the highest integrity level functionalities (e.g. ASIL-D in automotive), diverse redundancy must be deployed to avoid unreasonable risk of a single fault leading the system to a failure (e.g. using lockstepped cores). However, existing lockstep solutions are either (1) highly intrusive and inflexible coupling two cores with hardware means, or (2) costly in terms of execution time and monitoring if a software monitor thread checks that cores running redundantly preserve sufficient staggering. This paper presents SafeDE, a Diversity Enforcement hardware module providing light-lockstep support by means of a non-intrusive and flexible hardware module that preserves staggering across cores running redundant threads, thus bringing time diversity. SafeDE reconciles the lightness and flexibility of software-only solutions, even allowing using the cores without any lockstepping, as well as the tighter staggering of hardware-only solutions that allow using staggering values of few cycles, instead of hundreds of microseconds, as for software-only solutions. Our integration of SafeDE in a RISC-V FPGA-based space multicore from Cobham Gaisler shows that staggering is effectively preserved, and SafeDE overheads are negligible in terms of area and performance due to staggering., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 871467. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

SafeDM: a hardware diversity monitor for redundant execution on non-lockstepped cores

  • Bas Jalón, Francisco
  • Benedicte Illescas, Pedro|||0000-0003-1670-7783
  • Alcaide Portet, Sergi|||0000-0001-8561-7795
  • Cabo Pitarch, Guillem
  • Mazzocchetti, Fabio
  • Abella Ferrer, Jaume|||0000-0001-7951-4028
Computing systems in the safety domain, such as those in avionics or space, require specific safety measures related to the criticality of the deployment. A problem these systems face is that of transient failures in hardware. A solution commonly used to tackle potential failures is to introduce redundancy in these systems, for example 2 cores that execute the same program at the same time. However, redundancy does not solve all potential failures, such as Common Cause Failures (CCF), where a single fault affects both cores identically (e.g. a voltage droop). If both redundant cores have identical state when the fault occurs, then there may be a CCF since the fault can affect both cores in the same way. To avoid CCF it is critical to know that there is diversity in the execution amongst the redundant cores. In this paper we introduce SafeDM, a hardware Diversity Monitor that quantifies the diversity of each redundant processor to guarantee that CCF will not go unnoticed, and without needing to deploy lockstepped cores. SafeDM computes data and instruction diversity separately, using different techniques appropriate for each case. We integrate SafeDM in a RISC-V FPGA space MPSoC from Cobham Gaisler where SafeDM is proven effective with a large benchmark suite, incurring low area and power overheads. Overall, SafeDM is an effective hardware solution to quantify diversity in cores performing redundant execution., EU’s Horizon 2020 grant no. 871467 and Spanish MSI grant PID2019-107255GB-C21/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Enabling hardware randomization across the cache hierarchy in Linux-Class processors

  • Doblas, Max
  • Kostalampros, Ioannis-Vatistas|||0000-0003-1912-5092
  • Moretó Planas, Miquel|||0000-0002-9848-8758
  • Hernández Luz, Carles
The most promising secure-cache design approaches use cache-set randomization to index cache contents thus thwarting cache side-channel attacks. Unfortunately, existing randomization proposals cannot be sucessfully applied to processors’ cache hierarchies due to the overhead added when dealing with coherency and virtual memory. In this paper, we solve existing limitations of hardware randomization approaches and propose a cost-effective randomization implementation to the whole cache hierarchy of a Linux-capable RISC-V processor., This work has been supported by the European HiPEAC Network of Excellence, by the Spanish Ministry of Economy and Competitiveness (contract TIN2015-65316-P), and by Generalitat de Catalunya (contracts 2017-SGR-1414 and 2017- SGR-1328). The DRAC project is co-financed by the European Union Regional Development Fund within the framework of the ERDF Operational Program of Catalonia 2014-2020 with a grant of 50% of total cost eligible. We also thank Red-RISCV for the efforts to promote activities around open hardware. This work has received funding from the EU Horizon2020 programme under grant agreement no. 871467 (SELENE). M. Doblas has been partially supported by the Agency for Management of University and Research Grants (AGAUR) of the Government of Catalonia under Beques de Col·laboració d’estudiants en departaments universitaris per al curs 2019- 2020. V. Kostalabros has been partially supported by the Agency for Management of University and Research Grants (AGAUR) of the Government of Catalonia under Ajuts per a la contractació de personal investigador novell fellowship number 2019FI_ B01274. M. Moreto has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship number RYC- 2016-21104., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

SafeDE: A low-cost hardware solution to enforce diverse redundancy in multicores

  • Bas Jalón, Francisco
  • Alcaide Portet, Sergi
  • Cabo Pitarch, Guillem
  • Benedicte Illescas, Pedro
  • Abella Ferrer, Jaume
Failure risk must be tiny in high-integrity systems, such as those in cars, satellites and aircraft. Hence, safety measures must be deployed to avoid a single fault leading to a failure. Redundancy has been often used to address this concern, but it has been proven insufficient if a single fault can cause the same error in all redundant elements, which defeats the purpose of redundancy for error detection. Hence, to avoid this scenario, diversity is implemented along with redundancy, being lockstep execution the most popular diverse redundancy solution for computing cores. However, classic lockstep solutions have non-negligible limitations if implemented in hardware (e.g., half of the cores can only be used for redundant execution and are not even visible at user level), or in software (e.g., the software loop to enforce staggering is long and costs performance). This paper tackles the limitations of classic lockstep solutions by providing an extended analysis and evaluation of SafeDE, a Diversity Enforcement hardware module combining the short loop to enforce diversity of hardware solutions, and the nonintrusiveness of software solutions. Hence, cores can operate in lockstep mode efficiently or run independent tasks. In this paper, we present SafeDE and its rationale, its application to N-modular systems, its hardware and software integration, and an evaluation showing its performance and area efficiency, and its behavior in the presence of faults., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme under Grant 871467, and in part by the Spanish Ministry of Science and Innovation under Grant PID2019-107255GB-C21/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Enabling hardware randomization across the cache hierarchy in Linux-Class processors

  • Doblas, Max
  • Kostalampros, Ioannis-Vatistas
  • Moretó Planas, Miquel
  • Hernández Luz, Carles
The most promising secure-cache design approaches use cache-set randomization to index cache contents thus thwarting cache side-channel attacks. Unfortunately, existing randomization proposals cannot be sucessfully applied to processors’ cache hierarchies due to the overhead added when dealing with coherency and virtual memory. In this paper, we solve existing limitations of hardware randomization approaches and propose a cost-effective randomization implementation to the whole cache hierarchy of a Linux-capable RISC-V processor., This work has been supported by the European HiPEAC Network of Excellence, by the Spanish Ministry of Economy and Competitiveness (contract TIN2015-65316-P), and by Generalitat de Catalunya (contracts 2017-SGR-1414 and 2017- SGR-1328). The DRAC project is co-financed by the European Union Regional Development Fund within the framework of the ERDF Operational Program of Catalonia 2014-2020 with a grant of 50% of total cost eligible. We also thank Red-RISCV for the efforts to promote activities around open hardware. This work has received funding from the EU Horizon2020 programme under grant agreement no. 871467 (SELENE). M. Doblas has been partially supported by the Agency for Management of University and Research Grants (AGAUR) of the Government of Catalonia under Beques de Col·laboració d’estudiants en departaments universitaris per al curs 2019- 2020. V. Kostalabros has been partially supported by the Agency for Management of University and Research Grants (AGAUR) of the Government of Catalonia under Ajuts per a la contractació de personal investigador novell fellowship number 2019FI_ B01274. M. Moreto has been partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under Ramón y Cajal fellowship number RYC- 2016-21104., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SafeSU-2: a safe statistics unit for space MPSoCs

  • Cabo Pitarch, Guillem
  • Alcaide Portet, Sergi
  • Hernández Luz, Carles
  • Benedicte Illescas, Pedro
  • Bas Jalón, Francisco
  • Mazzocchetti, Fabio
  • Abella Ferrer, Jaume
Advanced statistics units (SUs) have been proven effective for the verification, validation and implementation of safety measures as part of safety-related MPSoCs. This is the case, for instance, of the RISC-V MPSoC by CAES Gaisler based on NOEL-V cores that will become commercially ready on FPGAs by the end of 2022. However, while those SUs support safety in the rest of the SoC, they must be built to be safe to be part of commercial products. This paper presents the SafeSU-2, the safety-compliant version of the SafeSU. In particular, we perform a Failure Mode and Effect Analysis (FMEA) for the SafeSU for relevant fault models, and implement fault detection and tolerance features needed to make it compliant with the requirements of safety-related devices in general, and of space MPSoCs in particular., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 871467. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GBC21/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

On the reliability of hardware event monitors in MPSoCs for critical domains

  • Barrera Herrera, Javier Enrique
  • Kosmidis, Leonidas
  • Tabani, Hamid
  • Mezzetti, Enrico
  • Abella Ferrer, Jaume
  • Fernández, Mikel
  • Bernat Nicolau, Guillem Joan
  • Cazorla Almeida, Francisco Javier
Performance Monitoring Units (PMUs) are at the heart of most-advanced timing analysis techniques to control and bound the impact of contention in Commercial Off-The-Shelf (COTS) SoCs with shared resources (e.g. GPUs and multicore CPUs). In this paper, we report discrepancies on the values obtained from the PMU event monitors and the number of events expected based on PMU event description in the processor's official documentation. Discrepancies, which may be either due to actual errors or inaccurate specifications, make PMU readings unreliable. This is particularly problematic in consideration of the critical role played by event monitors for timing analysis in domains such as automotive and avionics. This paper proposes a systematic procedure for event monitor validation. We apply it to validate event monitors in the NVIDIA Xavier and TX2, and the Zynq UltraScale+ MPSoC. We show that, while some event monitors count as expected, this is not the case for others whose discrepancies with expected values we analyze., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant TIN2015-65316-P, the SELENE European Union’s Horizon 2020 (H2020) research and innovation programme under grant agreement No 871467, and the HiPEAC Network of Excellence. MINECO partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717), Enrico Mezzetti under Juan de la-Cierva-Incorporacion postdoctoral fellowship (IJCI-2016-27396), and Leonidas Kosmidis under Juan de la Cierva-Formacion postdoctoral fellowship (FJCI-2017-34095)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

End-to-end QoS for the open source safety-relevant RISC-V SELENE platform

  • Andreu Cerezo, Pablo
  • Hernández Luz, Carles
  • Picornell Sanjuan, Tomás
  • López Rodríguez, Pedro
  • Alcaide Portet, Sergi
  • Bas Jalón, Francisco
  • Benedicte Illescas, Pedro
  • Chang, Feng
  • Cabo Pitarch, Guillem
  • Fuentes Díaz, Francisco Javier
  • Abella Ferrer, Jaume
This paper presents the end-to-end QoS approach to provide performance guarantees followed in the SELENEplatform, a high-performance RISC-V based heterogeneous SoC for safety-related real-time systems. Our QoS approach includes smart interconnect solutions for buses and NoCs, along with multicore interference-aware statistics units to, cooperatively, achieve end-to-end QoS., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 871467. BSC work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB-C21/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Software-only triple diverse redundancy on GPUs for autonomous driving platforms

  • Alcaide Portet, Sergi
  • Kosmidis, Leonidas
  • Hernández Luz, Carles
  • Abella Ferrer, Jaume
Autonomous driving (AD) imposes the need for safe computations in high-performance computing (HPC) components such as GPUs, thus with capabilities to detect and recover from errors since a safe state may not exist anymore. This can be achieved with Triple Modular Redundancy (TMR) for computation components. Furthermore, error detection capabilities need to provide some form of diversity to avoid the case where a single fault leads all redundant executions lead to the same error, which would go undetected. In our past work, we assessed GPUs against dual modular redundancy (DMR) with diversity, showing their potential and limitations to provide diverse redundancy building on reset and restart for recovery. However, such recovery scheme may be too slow for some applications. This paper proposes a software-only solution to deliver diverse TMR on commercial off-the-shelf (COTS) GPUs. Our work details how staggered execution can be achieved and assesses the performance of TMR on COTS GPUs. Moreover, we identify those elements where diversity cannot be guaranteed and provide some discussion comparing the case of DMR and TMR for those elements., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 871467 (SELENE). Leonidas Kosmidis has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under a Juan de la Cierva Formacion postdoctoral fellowship with number FJCI-2017-34095., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SafeTI: a hardware traffic injector for MPSoC functional and timing validation

  • Sala Sucarrats, Oriol
  • Alcaide Portet, Sergi
  • Cabo Pitarch, Guillem
  • Bas Jalón, Francisco
  • Lorenzo Ortega, Rubén
  • Benedicte Illescas, Pedro
  • Trilla Rodríguez, David
  • Gil Rodríguez, Guillermo
  • Mazzocchetti, Fabio
  • Abella Ferrer, Jaume
Functional and timing validation of safety-related MPSoCs requires testing specific traffic patterns in the on-chip interconnects. Generally, testing needs to be performed by using software tests whose degree of control on the traffic generated is indirect, and limited to behavior that can be triggered by software, thus often unable to produce traffic generated by peripherals. Therefore, untested traffic scenarios can be abundant and, to a large extent, it is hard to know what traffic scenarios have been effectively tested. This paper presents the safe traffic injector, SafeTI, which allows injecting programmable traffic in AMBA AHB interconnects with high flexibility and degree of control, thus easing achieving high coverage in terms of traffic scenarios tested, and mitigating the uncertainty due to the difficulties to relate software tests with actual traffic scenarios tested. We also integrate successfully the SafeTI in an industrial MPSoC for the space domain proving the effectiveness of the proposed traffic injector., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 871467. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SafeDM: a hardware diversity monitor for redundant execution on non-lockstepped cores

  • Bas Jalón, Francisco
  • Benedicte Illescas, Pedro
  • Alcaide Portet, Sergi
  • Cabo Pitarch, Guillem
  • Mazzocchetti, Fabio
  • Abella Ferrer, Jaume
Computing systems in the safety domain, such as those in avionics or space, require specific safety measures related to the criticality of the deployment. A problem these systems face is that of transient failures in hardware. A solution commonly used to tackle potential failures is to introduce redundancy in these systems, for example 2 cores that execute the same program at the same time. However, redundancy does not solve all potential failures, such as Common Cause Failures (CCF), where a single fault affects both cores identically (e.g. a voltage droop). If both redundant cores have identical state when the fault occurs, then there may be a CCF since the fault can affect both cores in the same way. To avoid CCF it is critical to know that there is diversity in the execution amongst the redundant cores. In this paper we introduce SafeDM, a hardware Diversity Monitor that quantifies the diversity of each redundant processor to guarantee that CCF will not go unnoticed, and without needing to deploy lockstepped cores. SafeDM computes data and instruction diversity separately, using different techniques appropriate for each case. We integrate SafeDM in a RISC-V FPGA space MPSoC from Cobham Gaisler where SafeDM is proven effective with a large benchmark suite, incurring low area and power overheads. Overall, SafeDM is an effective hardware solution to quantify diversity in cores performing redundant execution., EU’s Horizon 2020 grant no. 871467 and Spanish MSI grant PID2019-107255GB-C21/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SELENE: Self-Monitored Dependable Platform for High-Performance Safety-Critical Systems

  • Hernández, Carles
  • Flieh, Jose
  • Paredes, Roberto
  • Lefebvre, Charles-Alexis
  • Allende, Imanol
  • Abella Ferrer, Jaume
  • Trillin, David
  • Matschnig, Martin
  • Fischer, Bernhard
  • Schwarz, Konrad
  • Kiszka, Jan
  • Rönnbäck, Martin
  • Klockars, Johan
  • Mc Guire, Nicholas
  • Rammerstorfer, Franz
  • Schwarzl, Christian
  • Wartet, Franck
  • Lüdemann, Dierk
  • Labayen, Mikel
Existing HW/SW platforms for safety-critical systems suffer from limited performance and/or from lack of flexibility due to building on specific proprietary components. This jeopardizes their wide deployment across domains. While some research has been done to overcome these limitations, they have had limited success owing to missing flexibility and extensibility. Flexibility and extensibility are the cornerstones of industry adoption: industries dealing in capital goods need technologies on which they can rely on during decades (e.g. avionics, space, automotive). SELENE aims at covering this gap by proposing a new family of safety-critical computing platforms, which builds upon open source components such as the RISC-V instruction set architecture, GNU/Linux, and the Jailhouse hypervisor. SELENE will develop an advanced computing platform that is able to: (1) adapt the system to the specific requirements of different application domains, to changing environmental conditions, and to internal conditions of the system itself; (2) allow the integration of applications of different criticalities and performance demands in the same platform, guaranteeing functional and temporal isolation properties; (3) achieve flexible diverse redundancy by exploiting the inherent redundant capabilities of the multicore; and (4) efficiently execute compute-intensive applications by means of specific accelerators., This work has received funding from the European Unions Horizon 2020 research and innovation programme under grant agreement no. 871467., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Security, reliability and test aspects of the RISC-V ecosystem

  • Abella Ferrer, Jaume
  • Alcaide Portet, Sergi
  • Anders, Jens
  • Bas Jalón, Francisco
  • Becker, Steffen
  • De Mulder, Elke
  • Elhamawy, Nourhan
  • Gürkaynak, Frank K.
  • Handschuh, Helena
  • Hernández Luz, Carles
  • Hutter, Mike
  • Kosmidis, Leonidas
  • Polian, Ilia
  • Sauer, Matthias
  • Wagner, Stefan
  • Regazzoni, Francesco
RISC-V has emerged as a viable solution on academia and industry. However, to use open source hardware for safety-critical applications, we need a deep understanding of the way in which well established mechanisms for testing and reliability could be integrated and deployed on the RISCV ecosystem, and we need a clear knowledge on how such an ecosystem can be leveraged to improve security. This paper includes four contributions presenting the potential of RISC-V in security research, the way in which RISC-V can be hardened against power analysis attacks, how to implement, using RISCV, software and hardware/software solutions for dual core lock step, and how to perform system-level testing in the RISC-V ecosystem., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SafeDE: a flexible Diversity Enforcement hardware module for light-lockstepping

  • Bas Jalón, Francisco
  • Alcaide Portet, Sergi
  • Lorenzo Ortega, Rubén
  • Cabo Pitarch, Guillem
  • Gil Rodríguez, Guillermo
  • Sala Sucarrats, Oriol
  • Mazzocchetti, Fabio
  • Trilla Rodríguez, David
  • Abella Ferrer, Jaume
Safety-related systems, such as those in automotive, avionics and space, impose the existence of appropriate safety measures to meet the safety requirements of the system. In the case of the highest integrity level functionalities (e.g. ASIL-D in automotive), diverse redundancy must be deployed to avoid unreasonable risk of a single fault leading the system to a failure (e.g. using lockstepped cores). However, existing lockstep solutions are either (1) highly intrusive and inflexible coupling two cores with hardware means, or (2) costly in terms of execution time and monitoring if a software monitor thread checks that cores running redundantly preserve sufficient staggering. This paper presents SafeDE, a Diversity Enforcement hardware module providing light-lockstep support by means of a non-intrusive and flexible hardware module that preserves staggering across cores running redundant threads, thus bringing time diversity. SafeDE reconciles the lightness and flexibility of software-only solutions, even allowing using the cores without any lockstepping, as well as the tighter staggering of hardware-only solutions that allow using staggering values of few cycles, instead of hundreds of microseconds, as for software-only solutions. Our integration of SafeDE in a RISC-V FPGA-based space multicore from Cobham Gaisler shows that staggering is effectively preserved, and SafeDE overheads are negligible in terms of area and performance due to staggering., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 871467. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SafeX: Open source hardware and software components for safety-critical systems

  • Alcaide Portet, Sergi
  • Cabo Pitarch, Guillem
  • Bas Jalón, Francisco
  • Benedicte Illescas, Pedro
  • Fuentes Díaz, Francisco Javier
  • Chang, Feng
  • Lasfar, Ilham
  • Canal Corretger, Ramon
  • Abella Ferrer, Jaume
RISC-V Instruction Set Architecture (ISA) emerges as an opportunity to develop open source hardware without being subject to expensive licenses or export restrictions. A plethora of initiatives are nowadays developing systems-on-chip (SoCs) and its components based on RISC-V targeting a wide variety of markets. However, domains with safety requirements, such as avionics, space, and automotive, impose SoCs to include support to meet those requirements.This work introduces the SafeX family of components, a set of components providing SoC controllability, observability and safety measures support. These components, developed by the Barcelona Supercomputing Center with permissive open source licenses, are intended to be the basis to make SoCs meet the needs of domains with safety requirements. In particular, the SafeX components developed so far include the SafeSU (multicore statistics unit), the SafeTI (flexible and programmable traffic injector), the SafeDE and SafeSoftDR (hardware and software modules to enforce lockstep execution), and the SafeDM (module to monitor diversity across cores)., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 871467. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant PID2019-107255GB-C21 funded by MCIN/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)