Skip to main content

FILMS Y RECUBRIMIENTOS COMESTIBLES/BIODEGRADABLES, CON ACTIVIDAD ANTIMICROBIANA Y ANTIOXIDANTE, PARA USO ALIMENTARIO. UTILIZACION DE PROCESADO EN HUMEDO Y EN SECO.

AGL2010-20694

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Properties and ageing behaviour of pea starch films as affected by blend with poly(Vinyl Alcohol)

  • Cano Embuena, Amalia Isabel
  • Fortunati, Elena
  • Kenny, J.M.
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Pea starch (S) and poly(vinyl alcohol) (PVA) blends with different ratios were produced in order to elucidate the possible advantages of blend films to overcome the common drawbacks of starch films. Starch, poly(vinyl alcohol) and blends (S:PVA ratios of 2:1, 1:1 and 1:2) were obtained by casting and microstructure and thermal behaviour were characterized. Moreover, barrier, mechanical and optical properties were evaluated after 1 and 5 storage weeks at 25 ºC and 53 % relative humidity in order to study the effect of poly(vinyl alcohol) on the ageing process of starch. The incorporation of PVA into pea starch films implied the formation of interpenetrated networks of both incompatible polymers with partial solubilisation. S-PVA blend films were much more extensible and stable during storage, with improved water barrier properties and reduced water sorption capacity especially when the S:PVA ratio were 1:1 and 1:2. Starch-poly(vinyl alcohol) blend films are environmentally friendly, low cost materials, with good functional properties., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2010-20694, co-financed with FEDER funds. Amalia Cano also thanks the Spanish Ministerio de Educacion, Cultura y Deporte for the FPU grant and COST-STSM-FA1001-14253 for the financial support for the collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical and antioxidant properties of chitosan and methylcellulose based films containing resveratrol

  • Pastor Navarro, Clara|||0009-0006-9942-4322
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Sánchez González, Laura
[EN] New trends in edible films focus on the improvement of their functionality through the incorporation of active compounds, such as antimicrobial or antioxidant agents. Resveratrol is a natural antioxidant found in a variety of plant species, such as grapes, and could be used for minimizing or preventing lipid oxidation in food products, retarding the formation of oxidation products, maintaining nutritional quality and prolonging the food shelf life. The aim of this work was to develop and characterize two different polymeric composite films (made with chitosan (CH) and methylcellulose (MC)) containing different amounts of resveratrol. This compound could be incorporated efficiently into both films, but provoke structural changes in the matrices, which became less stretchable (65-70% reduction of deformation at break at the greatest resveratrol content) and resistant to fracture (26 and 54% reduction of tensile at break for MC and CH, respectively, at the greatest resveratrol content) more opaque (significant reduction of the internal transmittance) and less glossy (about 60-65% reduction of gloss at the greatest resveratrol content). Film barrier properties were hardly improved by the presence of resveratrol; water vapour and oxygen permeability tend to slightly decrease when resveratrol was incorporated into both polymers. Composite films showed antioxidant activity, which was proportional to the resveratrol concentration in the film. None of the films showed antimicrobial activity against Penicillium italicum and Botrytis cinerea. Thus, these films could be applied to food products which are sensitive to oxidative processes to prolong their shelf life. (C) 2012 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovación throughout the project AGL2010-20694.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Properties of starch hydroxypropyl methylcellulose based films obtained by compression molding

  • Ortega-Toro, Rodrigo
  • Jiménez Marco, Alberto
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Corn starch glycerol (1:0.3) films, containing or not citric acid (1 g/100 g starch) and HPMC (10 and 20 g/100 g starch), are obtained by compression molding. The microstructure of the films, the thermal behavior, the X-ray diffraction spectra and the physical properties (mechanical, barrier and optical) were analyzed after 1 and 5 storage weeks at 25 °C and 53% relative humidity. The bonded citric acid and film solubility were also determined. Starch HPMC blend films showed a dispersed phase of HPMC in a continuous, starch-rich phase with lower glass transition than HPMC-free films. The addition of citric acid also provoked a decrease in glass transition in line with the partial hydrolysis of starch chains. Both components implied a decrease in the water vapour permeability while the oxygen permeability slightly increased. Although citric acid only provoked a small hardening effect in the films, it greatly decreased their extensibility (weak cross-linking effect), which seems to increase during film storage. Starch crystallization during storage was inhibited by both citric acid and HPMC., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia throughout the project AGL2010-20694. Rodrigo Ortega-Toro thanks the Conselleria de Educacio de la Comunitat Valenciana for the Santiago Grisolla grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antioxidant edible films based on chitosan and starch containing polyphenols from thyme extracts

  • Talón Argente, Emmanuelle
  • Trifkovic, Kata T.
  • Nedovic, Viktor A.
  • Bugarski, Branko M.
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The aim of this study was to analyse the antioxidant activity of different polymeric matrices based on chitosan and starch, incorporating a thyme extract (TE) rich in polyphenols. TE provided the films with remarkable antioxidant activity. When mixed with chitosan, the polyphenols interacted with the polymer chains, acting as crosslinkers and enhancing the tensile behaviour of films. The opposite effect was observed when incorporated into the starch matrix. All the films became darker, more reddish and less transparent when TE was incorporated. These colour changes were more marked in starch matrices, which suggests that TE compounds were poorly encapsulated. The use of chitosan-based matrices carrying TE polyphenols is recommended as a means of obtaining antioxidant films, on the basis of their tensile response and greater antioxidant activity, which could be associated with the development of polyphenol-chitosan interactions, contributing to a better protection of the functionality of polyphenols during film formation and conditioning., The authors acknowledge the financial support provided by the Spanish Ministerio de Ciencia e Innovación (Project AGL2010-20694). Author E. Talon thanks Universitat Politecnica Valencia (UPV) for a FPI Grant (99/2011). The authors also thanks Oscar Gil and Amparo Ribes from Institute of Materials Technology (UPV) for the support and assistance in the use of the infrared spectrometer.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Essential oils as additives in biodegradable films and coatings for active food packaging

  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Background: Petroleum derivate plastics represent a serious environmental problem, which is why alternative sustainable solutions must be found. To this aim, recent research has focused on the development of edible/biodegradable packaging for food products. The implementation of this novel packaging requires analyzing thoroughly the effect of the ingredients used on the most relevant properties of the material. Scope and approach: Essential oils represent an interesting ingredient for biodegradable food packaging, mainly due to their natural origin and their functional (antioxidant/antimicrobial) properties, allowing for obtaining active materials aiming to extend shelf-life and add value to the product. However, their inclusion in edible/biodegradable films for food packaging may imply some impact on several properties of the system (such as optical, tensile¿), affecting in turn the consumer acceptability. Before the increasing research on biodegradable materials for food packaging, and the growing interest on natural food additives, this paper aims to review the latest findings on how essential oils impact the most relevant properties of edible films and coatings, namely microstructural, physical (tensile, barrier, optical), antioxidant and antimicrobial. Key findings and conclusions: Essential oil incorporation affects the continuity of the polymer matrix, leading to physical changes depending on the specific polymer-oil components interactions. Generally, the film structure is weakened by the oil addition, whereas the water barrier properties are improved and the transparency is reduced. Essential oils may provide the films with antioxidant and/or antimicrobial properties. The oil composition and the specific interactions with the polymer determine its effectiveness as an active ingredient., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-11-2013 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2013/152).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of homogenization conditions on physical properties and antioxidant activity of fully biodegradable pea protein-alpha-tocopherol films

  • Fabra, M. José
  • Jiménez, Alberto
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
In this study, antioxidant biodegradable films based on pea protein and alpha-tocopherol were successfully developed by solution casting. The effect of both the homogenization conditions (rotor stator and microfluidizer) and the relative humidity (RH) on the microstructure and physical properties (transparency, tensile, oxygen and water vapour barrier properties) of pea protein/alpha-tocopherol-based films was evaluated. The addition of alpha-tocopherol produced minimal changes in the films transparency, while providing them with antioxidant properties and improved water vapour and oxygen barrier properties (up to 30 % in both water vapour and oxygen permeability) when films were at low and intermediate RH. The addition of alpha-tocopherol in microfluidized films gave rise to an increase in their resistance to break and extensibility (up to 27 % in E values) at intermediate and high RH. These results add a new insight into the potential of employing pea protein and alpha-tocopherol in the development of fully biodegradable antioxidant films which are of interest in food packaging, The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia throughout the project AGL2010-20694, co-funded by FEDER. Author M.J.Fabra is a recipient of a Juan de la Cierva contract from the Spanish Ministerio de Economia y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical properties and antioxidant capacity of starch-sodium caseinate films containing lipids

  • Jiménez Marco, Alberto
  • Fabra Rovira, María José
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Biodegradable films based on starch, sodium caseinate, glycerol and lipids (oleic acid and/or a-tocopherol) were obtained and evaluated in terms of microstructure, mechanical behaviour, barrier and optical properties and antioxidant capacity. The effect of film storage time on these properties was also analysed. The lipid incorporation provoked phase separation due to the different interaction between each polymer and lipids, although structural rearrangement of components during storage could be deduced from the change in mechanical behaviour. After storage, all films showed similar mechanical properties, but lipid containing films were more stretchable. Lipid addition did not induce a notable decreased in water vapour permeability of the films, but oxygen permeability highly increased when they contained oleic acid. All films were highly transparent, with very small differences among formulations, although their gloss values increased when lipids were added. The incorporation of a-tocopherol greatly increased the antioxidant capacity of the films which affected oxygen permeability., The authors acknowledge the financial support from Spanish Ministerio de Educacion y Ciencia throughout the Project AGL2010-20694. A. Jimenez also thanks Conselleria de Educacio de la Comunitat Valenciana for the FPI grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of chitosan lemon essential oil coatings on storage-keeping quality of strawberry

  • Perdones Montero, Ángela
  • Sánchez González, Laura
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vargas, Maria|||0000-0001-6024-0952
[EN] Film-forming dispersions (FFD) were prepared with 1% high molecular weight chitosan and 3% lemon essential oil and were submitted to two different homogenization treatments. The particle size and viscosity of the FFD were evaluated and stand-alone coatings were characterized in terms of water vapour permeability (WVP) and antimicrobial activity. The FFD were applied to cold-stored strawberries, cv. Camarosa, and the physicochemical properties, fungal decay and respiration rate of strawberries were determined throughout cold storage at 5 degrees C. The use of microfluidization to prepare chitosan-based FFD led to a significant reduction in the particle size and apparent viscosity of the dispersions, with no significant effect on the decrease in the WVP of the stand-alone coatings. Chitosan coatings did not show a significant effect in terms of the acidity, pH and soluble solid content of strawberries throughout storage. In contrast, coatings slowed down the respiration rate of samples when lemon essential oil was added to the FFD. Adding lemon essential oil enhanced the chitosan antifungal activity both in in vitro tests and during cold storage in strawberries inoculated with a spore suspension of Botrytis cinerea., The authors acknowledge the financial support provided by Conselleria de Empresa, Universidad y Ciencia (project GV/2010/082), Universitat Politecnica de Valencia (project PAID-06-09-2834) and Ministerio de Economia y Competitividad (project AGL2010-20694). Author A. Perdones is grateful to Universitat Politecnia de Valencia for a FPI grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antilisterial and physical properties of biopolymer films containing lactic acid bacteria

  • Sanchez-Gonzalez, L.
  • Quintero Saavedra, Jorge Ivan
  • Chiralt, Amparo|||0000-0003-1134-8144
Novel biopolymer films were developed and used to control Listeria innocua in an artificially contaminated synthetized medium. Two hydrocolloids, sodium caseinate (NaCas) and methylcellulose (MC), and two bacteriocin-producing lactic acid bacteria (LAB), Lactobacillus acidophilus and Lactobacillus reuteri, were tested. Bioactive cultures were added directly to the film forming solution and films were obtained by casting. In order to study the impact of the incorporation of bacterial cells into the biopolymer matrix, the water vapour permeability, optical and mechanical properties of the dry films were evaluated. Furthermore, the survival of LAB and the antimicrobial potential of bioactive films against L. innocua were studied. Results showed that the use of lactic acid bacteria altered the film s physical properties. Films enriched with bacterial cells exhibit higher gloss and transparency whereas no significant modifications were observed in terms of tensile properties. These films were less-effective water vapour barriers, since a significant increase can be observed in the WVP values. As far as food safety is concerned, these films are an interesting, novel approach. In refrigeration conditions, these films permit a complete inhibition of L. innocua for a week. Viability of LAB was higher in sodium caseinate films, although bacteriocin production was greater in polysaccharide matrix. The best results were obtained for films made of methylcellulose, without differences between the two lactic acid bacteria tested., The authors acknowledge the financial support from Spanish Ministerio de Educacion y Ciencia throughout the project AGL201020694. Author L. Sgnchez-Gonzalez thanks the support of Campus de Excelencia Internacional from Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Edible films and coatings to prevent the detrimental effect of oxygen on food quality: Possibilities and limitations

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Oxygen has a deleterious effect on the quality of a wide variety of food products. The application of edible films and coatings to food products represents a new approach to solve this problem. Edible films and coatings can include antioxidant agents in their formulation and at the same time, they represent a barrier to oxygen, which results in a better preservation of quality. The water activity of the product, as well as the ambient relative humidity, determines the antioxidant effect of films and coatings. This paper reviews the latest studies dealing with the effectiveness and application of antioxidant films and coatings.Highlights ► The deleterious effect of oxygen on food quality can be controlled with edible films and coatings containing antioxidants. ► The action of these involves the oxygen barrier effect and the specific activity of the incorporated antioxidant agents. ► The efficiency of edible films and coatings is greatly affected by the water availability in the film. ► This paper reviews the latest studies dealing with the effectiveness and application of antioxidant films and coatings., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-09-2834 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2010/082).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of cellulose nanocrystals on the properties of pea starch-poly(vinyl alcohol) blend films

  • Fortunati, Elena
  • Cano Embuena, Amalia Isabel
  • Kenny, J.M.
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Incorporation of cellulose nanocrystals (CNC) to pea starch-poly(vinyl alcohol) (PVA) (1:2 ratio) blend films was carried out in order to improve their physical properties. Different ratios (1, 3 and 5 % wt) of CNC were used and structural, thermal and physical (barrier, mechanical and optical) properties were analysed in comparison to the control film without CNC. Incorporation of CNC enhanced phase separation of polymers in two layers. The upper PVA rich phase contained lumps of starch which emerged from the film surface, thus reducing the film gloss. CNC were dispersed in both polymeric phases as aggregates, whose size increased with the CNC ratio rise. CNC addition did not implied changes in water vapour barrier of the films, but they became slightly stiffer and more stretchable, while crystallization of PVA was partially inhibited., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the Projects AGL2010-20694 and AGL2013-42989-R. Amalia Cano also thanks the Spanish Ministerio de Educacion, Cultura y Deporte for the FPU grant and COST-STSM-FA1001-14253 for the financial support for the collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Properties of wheat starch film-forming dispersions and films as affected by chitosan addition

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] In order to evaluate the impact of chitosan on the physical properties of wheat starch-glycerol films, part of the wheat starch was replaced by chitosan, and the effect of composition on the properties of both the films and the film-forming dispersions was studied. The latter became more stable and viscous as the chitosan proportion was increased in the mixture. Both polymers appeared to integrate homogeneously in the film matrix. The combined effect of the glycerol and chitosan proportions affected the mechanical and barrier properties of the films. The tensile strength and elastic modulus of the films were improved as chitosan ratio increased. The oxygen and water vapor permeability slightly increased in line with the amount of chitosan in the blend although the induced differences were very small. Chitosan ratio directly affected the antimicrobial properties of the films, which showed a significant bactericide activity when the chitosan-starch ratio in the film was 50%. Nevertheless, at a starch:chitosan ratio of 80:20, counts of coliforms did not exceed the initial value in the meat after 7 storage days., The authors acknowledge the financial support from Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2010-20694 and Universidad Politecnica de Valencia (projects PAID-06-09-2834 and PAID-06-11-2013). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Lysozyme release from isolate pea protein and starch based films and their antimicrobial properties

  • Fabra Rovira, María José
  • Sánchez González, Laura
  • Chiralt, Amparo|||0000-0003-1134-8144
The objective of the current research was to analyze the effects of the pea protein and corn starch films as well as the temperature influence (10 and 25 C) on the release of lysozyme to a food simulant (agar gel). Lysozyme concentration at different depths of food simulant was measured, as a function of diffusion time, through its enzyme activity. In both polymer matrices, a loss of lysozyme activity was observed after film formation. Diffusion of lysozyme was enhanced when temperature increased, mainly when pea protein films were tested. A higher retention of lysozyme in the film starch matrix was significantly detected which could be attributed to the different hydration degree of the film in contact with the agar medium and the different interactions between the enzyme and the film polymer chains. The antimicrobial effectiveness of pea protein and starch films containing lysozyme (0, 50, 75 and 100 mg lysozyme/g hydrocolloid), against Listeria monocytogenes was proved. At 10 C, both matrices were effective against the pathogen. At 25 C, the effectiveness of films significantly decreased and pea protein films showed the best antimicrobial activity., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2010-20694, con-financed with FEDER founds. Author M.J. Fabra thanks the Campus de Excelencia Internacional VLC/CAMPUS for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of sodium caseinate on properties and ageing behaviour of corn starch based films

  • Jiménez Marco, Alberto
  • Fabra Rovira, María José
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
The effect of sodium caseinate addition on corn starch films was studied in terms of microstructural, mechanical, optical and water and oxygen barrier properties and the changes they underwent during their 5 weeks' storage under controlled conditions. The influence of the polymer mixture on the degree of crystallization of the films was also analysed. The following starch: protein ratios were considered. 100:0, 75:50, 50:50 and 0:100. SEM Microstructure analysis revealed the compatibility of both hydrocolloids since no phase separation was observed. The addition of sodium caseinate to the starch films provided films that were less stiff and resistant to fracture but more flexible and deformable than pure starch films, with similar water vapour permeability values. The films became more permeable to oxygen as their sodium caseinate content increased in line with the higher permeability values of the protein film. Incorporating sodium caseinate to starch films provoked a slight increase in transparency, but a loss of gloss, which also decreased in composite films during storage. The re-arrangement of polymer chains during storage caused a loss of mechanical resistance, stretchability and gloss in composite films., The authors acknowledge the financial support of the Spanish Ministerio de Economi a y Competitividad throughout the project AGL2010-20694. A. Jimenez is also grateful to the Conselleria de Educacio de la Comunitat Valenciana for the FPI grant. Author M.J.Fabra wishes to thank the Campus de Excelencia Internacional of the Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Phase transitions in starch based films containing fatty acids. Effect on water sorption and mechanical behaviour

  • Jiménez Marco, Alberto
  • Fabra Rovira, María José
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
The water sorption capacity (WSC) of starch films containing, or not, glycerol (1:0.25 starch:glycerol ratio) and fatty (palmitic, stearic and oleic) acids (1:0.15 starch:fatty acid ratio) was analysed at 10, 25 and 40 C in the entire range of aw. Starch re-crystallization during the equilibration time was also analysed by X-ray diffraction. Likewise, the glass transition and lipid melting properties as a function of the film water activity were determined. Mechanical behaviour was also analysed at 25 C for film samples equilibrated at 0, 53, 68 and 75% RH. Crystallization was promoted at low temperature and high relative humidity which modifies the expected tendencies in WSC as a function of the temperature. In relationship with this, V-type structures were formed during time, mainly in fatty acids containing films. Glass transition of the starch matrix at low moisture contents was affected by the presence of saturated fatty acids. Microstructural observations seem to corroborate the complex formation between these and the polymer chains. The mechanical behaviour of the films, as a function of the moisture content, is coherent with the results of the phase transition analysis and microstructural observations. The plasticization effects and the structural discontinuities in the polymer matrices determine the value of the elastic modulus and the behaviour at break, The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2010-20694, con-financed with FEDER founds. A. Jimenez also thanks Conselleria de Educacio de la Comunitat Valenciana for the FPI grant. Author M.J. Fabra thanks the support of Campus de Excelencia Internacional from Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of chitosan on the physicochemical and antimicrobial properties of PLA films

  • Bonilla Lagos, Maria Jeannine
  • Fortunati, Elena
  • Kenny, J.M.
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Films based on polylactic acid (PLA) and different amounts of chitosan powder (CH), were prepared by extrusion. The effects of CH particle size (715 and 180 mu m) and the amount of chitosan incorporated in the PLA matrix (5% or 10% on PLA basis) were investigated in terms of physicochemical characteristics and antimicrobial activity of the films. The incorporation of CH particles led to less rigid and less stretchable films. Thermal properties of PLA were not affected by chitosan addition. Water vapor permeability of the composite films was higher than pure PLA films. PLA:CH composite showed significant antimicrobial activity against total aerobial and coliform microorganisms, especially when the particle size of CH was reduced., The authors acknowledge the financial support provided by Ministerio de Educacion y Ciencia (Project AGL2010-20694). J. Bonilla thanks Generalitat Valenciana for Santiago Grisolia grant. The authors E. Fortunati and J.M. Kenny gratefully acknowledge the financial support from the National Consortium of Materials Science and Technology (INSTM). E.F. is the recipient of the fellowship "L'Oreal Italia per le Donne e la Scienza 2012" for the project "Progettazione, sviluppo e caratterizzazione di biomateriali nanostrutturati capaci di modulare la risposta e il differenziamento delle cellule staminali".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the incorporation of antimicrobial/antioxidant proteins on the properties of potato starch films

  • Moreno Marro, Olga
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Glycerol plasticized potato starch films containing bioactive proteins (lactoferrin (LF) and/or lysozyme (LZ), at 0.1 and 0.2 ratio with respect to starch) were obtained by casting method and characterized as to their microstructural, thermal and physical (water content, mechanical, water and oxygen barrier, optical) properties. The bioactive properties, named antioxidant and antimicrobial, of the proteins and the films were also characterized. The incorporation of proteins affected the structural and physical properties of potato starch films, while modifying their thermal behavior and increasing the glass transition temperature. Both proteins showed a certain degree of compatibility with starch chains through the bond formations (increase in Tg), while a part is separated and migrates to the film surface. Their incorporation, especially that of lactoferrin, greatly increased the film s brittleness, regardless of the films water content, although they enhance the water vapor and oxygen barrier properties, whatever the age of the film. Protein also reduced the film s transparency and gloss, while lactoferrin induced color changes. The thermal degradation of blend films and isolated proteins occurred at temperatures of over 250 ◦C, which means that blend starch films can be thermoprocessed, according to their thermoplastic properties and following the usual practices of the plastics industries. A synergistic antimicrobial action against Escherichia coli and coliforms was observed when both LZ and LF were simultaneously applied. Both of these exhibited antioxidant capacity., The authors acknowledge the financial support provided by the Generalitat Valenciana (GV/2013/152) and Ministerio de Economia y Competividad (Projects AGL2013-42989-R) and the services rendered by the Electron Microscopy Service of the UPV. Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of hydroxypropylmethylcellulose addition and homogenization conditions on properties and ageing of corn starch based films

  • Jiménez Marco, Alberto
  • Fabra Rovira, María José
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Edible films based on corn starch, hydroxypropyl methylcellulose (HPMC) and their mixtures were prepared by using two different procedures to homogenize the film forming dispersions (rotor-stator and rotor-stator plus microfluidizer). The influence of both HPMC-starch ratio and the homogenization method on the structural, optical, tensile and barrier properties of the films was analysed. The ageing of the films was also studied by characterizing them after 5 weeks' storage. Starch re-crystallization in newly prepared and stored films was analysed by means of X-ray diffraction. HPMC-corn starch films showed phase separation of polymers, which was enhanced when microfluidization was applied to the film forming dispersion. Nevertheless, HPMC addition inhibited starch re-crystallization during storage, giving rise to more flexible films at the end of the period. Water barrier properties of starch films were hardly affected by the addition of HPMC, although oxygen permeability increased due to its poorer oxygen barrier properties., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2010-20694, co-financed with FEDER funds. A. Jimenez also thanks Conselleria de Educacio de la Comunitat Valenciana for the FPI grant. Author M.J. Fabra thanks the support of Campus de Excelencia Internacional from Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical properties of chitosan-basil essential oil edible films as affected by oil content and homogenization conditions

  • Bonilla Lagos, Maria Jeannine
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] This work studies the influence of basil essential oil, its content and the homogenization treatment on the physical properties of chitosan-based edible films. Two homogenization treatments were applied, without (H1) and with (H2) microfluidization (MF). Composite films were softer, less rigid and more stretchable than pure CH films. MF intensified these changes. H2 films showed microcracks due to the weak interactions between chitosan and oil, which affected their mechanical behaviour. In pure chitosan films, MF significantly increased water vapour permeability. Homogenization treatment greatly affected this property. Gloss was reduced by the essential oil addition, whereas MF tended to yield glossier films., The authors acknowledge the financial support provided by Universidad Politécnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educación y Ciencia (Project AGL2010-20694).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Films de almidón termoplástico. Influencia de la incorporación de hidroxipropil-metil-celuslosa y ácido cítirico, Thermoplastic starch films. Influence of incorporation of hydroxypropyl-methyl-cellulose and citric acid

  • Ortega Toro, Rodrigo
  • Jiménez Marco, Alberto
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The aim of this work was to analyze the influence of citric acid (CA) and hydroxypropyl-methyl-cellulose (HPMC) addition in thermoplastic starch films obtained by compression-molding. Two ratios of HPMC- starch (10% and 20%) were considered while starch: CA ratio was of 1: 0,01. The films were characterized as to micro- and nano-structure using Scanning Electron Microscopy (SEM) and X-ray diffraction. Further, the water solubility, CA linked, mechanical and thermal properties were characterized. The starch-HPMC films showed phase separation although the glass transition analysis showed partial miscibility of the starch and HPMC which is accentuated with the addition of CA. The incorporation of HPMC and CA promoted the decrease of water vapor permeability and a slight increase in the oxygen permeability. The CA addition resulted in an increase of the elasticity modulus and decrease in the extensibility of films, which agrees with the cross-linking effect. The optical properties show a decrease in the material compactness with the CA presence causing higher film transparency., [ES] En este trabajo se analiza la influencia de la adición de ácido cítrico (CA) e hidroxipropil-metil-celulosa (HPMC) en películas de almidón termoplástico obtenidas por moldeo-compresión. Se consideraron dos proporciones de HPMC respecto al almidón (10% y 20%) siendo la proporción almidón: CA de 1: 0,01. Las películas se caracterizaron a nivel micro- y nano-estructural mediante las técnicas de microscopia electrónica de barrido (SEM) y difracción de rayos-X. Además, se caracterizó la solubilidad en agua de las películas y CA ligado, así como las propiedades mecánicas, térmicas y barrera. Las películas de almidón- HPMC mostraron separación de fases a nivel micro-estructural aunque el análisis de la transición vítrea pone de manifiesto miscibilidad parcial del almidón y HPMC que se acentúa con la adición de CA. La incorporación de HPMC y CA supuso la disminución de la permeabilidad al vapor de agua y un ligero incremento de la permeabilidad al oxígeno. La adición de CA dio lugar a valores mayores del módulo de elasticidad y descenso de la extensibilidad de los films, en concordancia con la formación de entrecruzamiento de cadenas. Las propiedades ópticas revelan la disminución de la compacidad del material con la presencia CA dando por resultado mayor transparencia., Los autores agradecen al comité organizador del Seminario Internacional en Empaques Biodegradables de la Universidad del Cauca (Colombia) por la invitación a participar en el evento. También agradecen el apoyo financiero del Ministerio Español de Educación y Ciencia a través del proyecto AGL2010-20694. Rodrigo Ortega-Toro agradece a la Conselleria de Educació de la Comunitat Valenciana por la beca Santiago Grisolía.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of re-crystallization on tensile, optical and water vapour barrier properties of corn starch films containing fatty acids

  • Jiménez Marco, Alberto
  • Fabra Rovira, María José
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Starch films are very hygroscopic and undergo crystallization during processing and storage. In this work, fatty acids (SA, PA and OA) were incorporated into starch films containing glycerol as plasticizer, in order to reduce the hygroscopic character of the films and to improve water vapour permeability. Microstructural, mechanical, barrier and optical properties were studied in both non-stored films and those stored for 5 weeks. Fatty acid addition affected the main properties of films since mechanical resistance was decreased, water vapour permeability was reduced and gloss and transparency were reduced. The degree of starch and FA crystallinity increased with storage time and gave rise to changes in film properties: films became stiffer, less effective as water vapour barriers and less transparent and glossy. Saturated fatty acids were more efficient at reducing WVP as compared to oleic acid, but these differences decreased after storage due to the greater increase in crystallization of the former as it has been observed by X-ray diffraction. © 2011 Elsevier Ltd., The authors acknowledge the financial support from Spanish Ministerio de Educacion y Ciencia throughout the project AGL2010-20694. A. Jimenez also thanks Conselleria de Educacio de la Comunitat Valenciana for the FPI grant. Author M.J. Fabra thanks the support of Campus de Excelencia Internacional from Universidad Politecnica de Valencia. The authors also acknowledge the Electronic Microscopy Service of Universidad Politecnica de Valencia for their assistance in the use of SEM and B. Mari for his assistance in X-ray diffraction analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of citric acid on the properties and stability of starch-polycaprolactone based films

  • Ortega Toro, Rodrigo
  • Collazo-Bigliardi, Sofía
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The influence of citric acid (CA) on structural and physicochemical properties of blend films based on corn starch and polycaprolactone (PCL) was studied. Films were obtained by melt blending of starch and PCL and compression molding. Phase separation of polymers observed by scanning electron microscope and atomic force microscope was reduced by CA incorporation. CA affected both starch and PCL crystallization as deduced from the X-ray diffraction patterns and values of melting enthalpy. Glass transition of starch was reduced by PCL incorporation, while this occurred to a greater extent in films containing CA. Obtained results point to enhanced interactions between PCL and starch chains in films with CA, although this only quantitatively benefits the film properties at a low PCL ratio. Compounding starch with small amounts of PCL, using glycerol and CA, can supply films with better functional properties than net starch films., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia throughout the projects AGL2010-20694 and AGL2013-42989-R. Rodrigo Ortega-Toro thanks the Conselleria de Educacio de la Comunitat Valenciana for the Santiago Grisolia grant. Authors also thank the Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the incorporation of surfactants on the physical properties of corn starch films

  • Ortega Toro, Rodrigo
  • Jiménez Marco, Alberto
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of surfactant addition on structural, mechanical, optical and barrier properties of corn starch-glycerol based films was studied. Sorbitan monopalmitate, monostearate or monooleate were incorporated into starch-glycerol (1:0.25) at a surfactant:starch ratio of 0.15:1. The film forming dispersions (FFD) were characterized as to rheology, ζ-potential, particle size distribution and contact angle. Film characterization was carried out at 1 and 5 storage weeks (at 25ºC and 53 % relative humidity). Surfactants led to different particle size distribution, zeta potential and viscosity in FFD, and film extensibility, depending on their hydrophobicity and melting properties. Their incorporation to the corn starch-glycerol films produced a coarser film microstructure due to the appearance of free surfactant aggregates or V-amylose inclusion complexes which produce discontinuities in the amorphous continuous matrix. The size of these crystalline complexes was smaller for the surfactant with the lowest hydrophobicity with saturated fatty acid (span 40). This contributed to decrease the WVP values with respect to surfactant-free film. Films containing surfactants were less hard, resistant and extensible, and more permeable to oxygen, than surfactant-free films, but they did not notably affect the film gloss and transparency. Saturated fatty acid compounds with higher melting temperature are recommended to ensure a finer microstructure in the final film which favours water barrier efficiency., The authors acknowledge the financial support from Spanish Ministerio de Educacion y Ciencia throughout the project AGL2010-20694. Rodrigo Ortega-Toro thanks Conselleria de Educacio de la Comunitat Valenciana for the Santiago Grisolia grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Properties of film forming dispersions and films based on chitosan containing basil and thyme essential oils

  • Perdones Montero, Ángela
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vargas, Maria|||0000-0001-6024-0952
[EN] Film-forming emulsions and films of chitosan containing basil or thyme essential oil, with and without oleic acid were characterised as to the emulsion stability (particle size, z-potential and rheological behaviour) and barrier, mechanical and optical properties of the films. The losses of the essential oil during the film formation were also quantified as well as the antifungal effect of the films against Aspergillus niger, Botrytis cinerea and Rhizopus stolonifer. The retention of essential oil in the films was greatly dependent on the stability of the film-forming emulsion. The addition of oleic acid (OA) to the chitosan-essential oil formulations enhanced the emulsion stability and oil retention in the film, at the same time that it improved the water vapour barrier properties of the film. Lipids reduced the film stretchability but when OA was present in the formulation, this reduction was mitigated, as well as the changes in colour provoked by the essential oils, whereas OA reduced the film transparency. Chitosan films with thyme or basil essential oil did not inhibit the growth of the tested fungi., The authors acknowledge the financial support provided by the Universitat Politecnica de Valencia (UPPTE/2012/183) and the Ministerio de Ciencia e Innovacion (AGL2010-20694). Author A. Perdones thanks the Universitat Politecnica de Valencia for an FPIgrant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physicochemical properties of chitosan-essential oils film-forming dispersions. Effect of homogenization treatments

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Chitosan films enriched with basil (B) or thyme (T) essential oils (EO) were prepared by means of two homogenization treatments, without (H1) and with (H2) microfluidization. H2 treatment led to a significant decrease in the average particle size and the type of EO significantly affected d(43) values (p<0.05). zeta-potential significantly increased with the use of H2 treatment. Treatment H2 changed the rheological behaviour of the FFD. In all cases, the viscosity of the FFD was reduced by this treatment. The type of EO had a different effect on rheological behaviour depending on the homogenization treatment. CH:T were more viscous at H2 and CH:A showed higher apparent viscosity values than CH:T at H1., The authors acknowledge the financial support provided by Universidad Politécnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educación y Ciencia (Project AGL2010-20694)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical, antioxidant and antimicrobial properties of chitosan cinnamon leaf oil films as affected by oleic acid

  • Perdones Montero, Ángela
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
The physical, antioxidant and antimicrobial properties of chitosan (CH)-cinnamon leaf essential oil (C) films, containing or not oleic acid (OA), were evaluated. The addition of OA led an increase in surface charge and particle size of the film-forming dispersions. This is in agreement with a greater CH adsorption on the droplets containing OA and the entrapment of C compounds in the non-polar core of the OA molecule associations. OA contributed to a better retention of C in the film during its drying, diminished the changes in colour parameters provoked by C addition and reduced the film transparency. Water vapour permeability of CH films was reduced by OA incorporation while it increased when they contained only C. Every film containing C showed antioxidant and antifungal properties, depending on the C content (the higher the C content, the greater the effect). OA reduced the antifungal effectiveness of C containing films in line with its encapsulating effect on C compounds. All the coatings were effective in extending the shelf-life of cold-stored strawberries, mainly when CH was combined with C at the ratio 1: 0.5., The authors acknowledge the financial support provided by Universitat Politecnica de Valencia (UPPTE/2012/183) and Ministerio de Ciencia e Innovacion (AGL2010-20694). Author A. Perdones acknowledges Universitat Politecnica de Valencia for a doctoral grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of amylose:amylopectin ratio and rice bran addition on starchfilms properties

  • Cano Embuena, Amalia Isabel
  • Jiménez Marco, Alberto
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
The influence of the amylose:amylopectin ratio on the properties of pea, potato and cassava starch films and the effect of the incorporation of rice bran of two different particle sizes were studied. The structural, mechanical, optical and barrier properties of the films were analyzed after 1 and 5 weeks. The high content of amylose gave rise to stiffer, more resistant to fracture, but less stretchable films, with lower oxygen permeability and greater water binding capacity. Although no changes in the water vapour permeability values of the films were observed during storage, their oxygen permeability decreased. Throughout storage, films became stiffer, more resistant to break, but less stretchable. Rice bran with the smallest particles improved the elastic modulus of the films, especially in high amylose content films, but reduced the film stretchability and its barrier properties, due to the enhancement of the water binding capacity and the introduction of discontinuities., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2010-20694, co-financed with FEDER founds. Amalia Cano also thanks Spanish Ministerio de Educacion, Cultura y Deporte for the FPU grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of essential oils and homogenization conditions on properties of chitosan-based films

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The influence of essential oil type (basil and thyme), its content and the homogenization treatment on the physical properties of chitosan-based film-forming dispersions and edible films was studied. Two homogenization treatments were applied, without (H1) and with (H2) microfluidization (MF) at 165 MPa. H2 emulsions showed the smallest particle size with the highest zeta-potential and the lowest viscosity. Composite films with essential oils were softer, less rigid and more stretchable than pure CH films. MF intensified these changes. H2 films showed micro-cracks due to the weakening of the polymer chain interaction forces when oils are present, which affected their mechanical behaviour. MF increased WVP of pure CH films while oil incorporation was only effective to reduce WVP when they were incorporated at the lowest ratio and when high pressure was used in the homogenization of the film-forming dispersion. Gloss was reduced by the essential oil addition, whereas MF tended to yield glossier films., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-09-2834 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2010/082). Authors also thank Manuel Planes, Jose Luis Moya and Mercedes Tabernero of the UPV Electronic Microscopy Service for their assistance in the use of the SEM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of chitosan essential oil films on the storage-keeping quality of pork meat products

  • Bonilla Lagos, Maria Jeannine
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
Edible films based on chitosan were prepared, with and without basil or thyme essential oils, with the aim of assessing their protective ability against lipid oxidation and their antimicrobial activity. Chitosan films had good oxygenbarrier properties, which were worsened by essential oil addition, especially when the film equilibrium moisture content increased. Due to the oxygen-barrier effect, all the films effectively protected pork fat from oxidation, in comparison to unprotected samples. In spite of the worsening of the oxygen-barrier properties, the films with essential oils were more effective than those of pure chitosan, which points to the chemical action of specific antioxidant compounds of the oils. Films were effective to control microbial growth in minced pork meat, although the incorporation of essential oils did not improve their antimicrobial activity. Throughout the storage, the films led to colour changes in minced pork meat associated with the conversion of myoglobin into metmyoglobin due to the reduction of the oxygen availability., The authors acknowledge the financial support provided by the Universitat Politecnica de Valencia (PAID-06-09-2834), Generalitat Valenciana (GV/2010/082) and Ministerio de Educacion y Ciencia (AGL2010-20694). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical properties and antilisterial activity of bioactive edible films containing Lactobacillus plantarum

  • Sánchez González, Laura
  • Quintero Saavedra, Jorge Ivan
  • Chiralt, Amparo|||0000-0003-1134-8144
Bioactive polymeric films were developed from the incorporation of Lactobacillus plantarum into polysaccharide or protein edible films. Lactic acid bacteria (LAB) were added directly to the film forming solution and films were obtained by casting. Four different biopolymers were tested: sodium caseinate, pea protein, methylcellulose and hydroxypropylmethylcellulose. In order to study the impact of the incorporation of the protective culture into the biopolymer matrix, the water vapour permeability (WVP), optical and mechanical properties of the dry films were evaluated. Furthermore, survival of L. plantarum and the antimicrobial potential of bioactive films against Listeria innocua were studied. Whereas optical and mechanical properties of the films were not notably altered by the LAB incorporation, WVP values increased for all biopolymers. Viability of the strain was lower in cellulose derivative matrices than in protein films, although bacteriocin production in the newly prepared films was greater in these matrices. As a result, a significant antimicrobial activity against L. innocuawas observed for polysaccharide matrices, which was not observed for protein films, where the bacteriocin production is delayed. In pea protein films the maximum bacteriocin production occurs at 15 storage days and afterwards decreases. So, the nature of the biopolymer and the knowledge of time when an adequate bacteriocin concentration is produced are key to use bioactive films in an effective way., The authors acknowledge the financial support from Spanish Ministerio de Educacion y Ciencia throughout the project AGL2010-20694. Author L. Sanchez-Gonzalez thanks the support of Campus de Excelencia Internacional from Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical and bioactive properties of corn starch - buttermilk edible films

  • Moreno Marro, Olga
  • MULLER, JUSTINE
  • Gonzalez Martínez, Chelo
  • Pastor Navarro, Clara|||0009-0006-9942-4322
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of incorporating different ratios of both non-heated and heated (95 ºC) buttermilk (BM) to corn starch (CS) films was analyzed in terms of its structural, mechanical, barrier, optical and bioactive properties. The properties of the film forming dispersions (particle size distribution, &#61562;-potential and rheological behavior) were also analyzed. As the BM increased in the blend, both the average particle size and the apparent viscosity of the film forming dispersions were reduced. The low degree of compatibility between both materials resulted in heterogeneous structures, where an interpenetrated protein phase in the starch matrix was observed as a result of the protein gelation when BM was heated. This affected the mechanical and barrier properties giving rise to more resistant and extensible, and less permeable films than in non-heated BM. Only films formulated with heated BM exhibited antioxidant activity, probably due to the release of the antioxidant peptides during thermal treatment of proteins. BM did not have any effect on the growth of Listeria innocua., The authors acknowledge the financial support provided by Universitat Politecnica de Valencia-Spain (PAID-06-11-2013), Generalitat Valenciana-Spain (GV/2013/152), and Ministerio de Educacion y Ciencia-Spain (Project AGL2010-20694). Olga Moreno Marro also thanks Ministerio de Educacion, Cultura y Deporte-Spain for a FPU grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Edible and Biodegradable Starch Films: A Review

  • Jiménez Marco, Alberto
  • Fabra Rovira, María José
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Mainly due to environmental aims, petroleum-based plastics are being replaced by natural polymers. In the last decades, starch has been evaluated in its film-forming ability for applications in the food packaging area. Characteristics of the starch film matrices, the film formation methods, and physicochemical properties of the starch films are reviewed in this paper. The influences of different components added in casting methods and thermoplastic processes have been also analyzed. Comparison of mechanical properties of newly prepared starch films and stored films reveals that the recrystallization phenomenon made the films more rigid and less stretchable. These effects can be inhibited by adding other polymers to the starch matrix. Other approaches to improve the starch films' properties are the reinforcement by adding organic or inorganic fillers to the starch matrix as well as the addition of functional compounds. In this way starch films have improved mechanical and barrier properties and can act as a bioactive packaging. Physicochemical properties of the starch films showed a great variability depending on the compounds added to the matrix and the processing method. Nevertheless, dry methods are more recommendable for film manufacturing because of the greater feasibility of the industrial process. In this sense, a better understanding of the nano and microstructural changes occurring in the matrices and their impact on the film properties is required. © 2012 Springer Science+Business Media, LLC., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia throughout the project AGL2010-20694, con-financed with FEDER founds. A. Jimenez also thanks Conselleria de Educacio de la Comunitat Valenciana for the FPI grant. Author M.J. Fabra thanks the Campus de Excelencia Internacional VLC/CAMPUS for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical and microstructural properties of biodegradable films based on pea starch and PVA

  • Cano Embuena, Amalia Isabel
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The effect of storage time on the physical properties of pea starch (PS) and polyvinyl alcohol (PVA) films and their blend was studied to develop biodegradable packaging materials for food applications. To this end, an analysis was performed of the microstructural and physical properties (solubility, moisture content, barrier, mechanical and optical properties) of PS, PVA and PS:PVA films stored for five weeks (25 C 53%RH). Whereas SEM micrographs showed a homogenous appearance for PS films, PVA presented irregularities typical of semi-crystalline structures. Blend films showed a structure which was more similar to PVA films. After 5 weeks, the physical properties of PVA films did not change; in the case of PS, however, the elastic modulus and tensile strength increased markedly but the stretchability and gloss significantly decreased, which was associated with water loss in the starch matrix. All the physical properties of blend films remained unchanged throughout time, except the elastic modulus and the tensile strength, which slightly increased. Therefore, the incorporation of PVA into pea starch films improved their physical properties and inhibited the changes that occurred in the starch matrix caused by ageing., The authors wish to acknowledge the finance support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2010-20694. Amalia Cano also thanks the Spanish Ministerio de Educacion, Cultura y Deporte for the FPU grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Barrier properties of sodium caseinate films as affected by lipid composition and moisture content

  • Fabra Rovira, María José
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
  • Chiralt, Amparo|||0000-0003-1134-8144
This work analyses the effect of lipid addition (oleic acid, beeswax and oleic acid-beeswax mixtures) as well as the influence of the relative humidity (RH), or the equilibrium water content of the films, on the permeability of sodium caseinate based films to water vapor and gas (oxygen and carbon dioxide). The effect that lipid addition had on the gas and water vapor permeability was dependent both on the composition of oleic acid-beeswax mixtures and the film's moisture content. The addition of lipid mixtures reduced water vapor transfer as compared to the control films (without lipid), whereas pure oleic acid or beeswax were less effective. Both control films and films prepared with pure beeswax showed the lowest O-2 and CO2 permeability, whereas the incorporation of oleic acid exponentially increased these values. A linear increase in water vapor and gas permeability was observed when the water content of the film rose, due to its plasticizing effect, which led to an increase in the molecular mobility. Predictive equations for water vapor permeability (WVP) and gas permeability were established as a function of water content and lipid composition., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia throughout the project AGL2007-01009 and AGL2010-20694, con-financed with FEDER founds. Author M.J. Fabra thanks the Campus de Excelencia Internacional VLC/CAMPUS for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical, structural and antimicrobial properties of poly vinyl alcohol-chitosan biodegradable films

  • Bonilla Lagos, Maria Jeannine
  • Fortunati, Elena
  • Kenny, J.M.
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Chitosan (CH) was blended with poly vinyl alcohol (PVA) in different compositions to obtain biodegradable films (PVA90:CH10, PVA80:CH20, PVA70:CH30). Blends and neat polymer films (PVA100,CH100) were characterized for their thermal behavior, structural, mechanical and barrier properties as well as antimicrobial activity. Both polymers showed good compatibility, as demonstrated by FESEM images and thermal behavior. A reduction in crystallinity of the blend was observed as the chitosan content was increased. Moreover, chitosan addition strongly reduced the film stretchability while increased the film rigidity and resistance to fracture, mainly at 70:30 PVA:CH ratio. Additional advantages of chitosan incorporation to PVA films are the reduction of the UV-transmittance while providing antimicrobial properties, The authors acknowledge the financial support provided by Universidad Politecnica de Valencia (PAID-06-11-2013) and Ministerio de Educacion y Ciencia (Project AGL2010-20694). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant. The authors E. Fortunati and J.M. Kenny gratefully acknowledge the financial support from the National Consortium of Materials Science and Technology (INSTM). E. F. is the recipient of the fellowship "L'Oreal Italia per le Donne e la Scienza 2012" for the project "Progettazione, sviluppo e caratterizzazione di biomateriali nanostrutturati capaci di modulare la risposta e il differenziamento delle cellule staminali".