Skip to main content

NUEVOS MATERIALES BIODEGRADABLES MULTICAPA PARA ENVASADO ACTIVO DE ALIMENTOS SENSIBLES AL DETERIORO MICROBIANO Y/O OXIDATIVO

AGL2013-42989-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 42
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Active bilayer films of thermoplastic starch and polycaprolactone obtained by compression molding

  • Ortega-Toro, Rodrigo
  • Morey, Iris
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Bilayer films consisting of one layer of PCL with either one of thermoplastic starch (S) or one of thermo-plastic starch with 5% PCL (S95) were obtained by compression molding. Before compression, aqueoussolutions of ascorbic acid or potassium sorbate were sprayed onto the S or S95 layers in order to plas-ticize them and favor layer adhesion. S95 films formed bilayers with PCL with very good adhesion andgood mechanical performance, especially when potassium sorbate was added at the interface. All bilayersenhanced their barrier properties to water vapour (up to 96% compared to net starch films) and oxygen(up to 99% compared to PCL pure). Bilayers consisting of PCL and starch containing 5% PCL, with potas-sium sorbate at the interface, showed the best mechanical and barrier properties and interfacial adhesionwhile having active properties, associated with the antimicrobial action of potassium sorbate., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia throughout the project AGL2013-42989-R. Rodrigo Ortega-Toro thanks the Conselleria de Educacio de la Comunitat Valenciana for the Santiago Grisolia grant (GROSO-LIA 2012/001). Authors also thank to Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Carvacrol encapsulation in starch or PCL based matrices by electrospinning

  • Tampau, Alina
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Carvacrol (CA) was encapsulated in polar (corn starch-Sodium caseinate, CS:NaCas) or non-polar (poly-¿-caprolactone, PCL) matrices by electrospinning (ES). Electrospunable formulations were prepared with CS:NaCas (9:1 w/w ratio), at 2, 4 and 6 wt % in water, or PCL at 5, 10 and 15 wt% in glacial acetic acid using different CA ratios (0, 5, 10 and 15 wt% with respect to the polymer). The liquid formulations were characterized for electrical conductivity, rheological behaviour and surface tension, and ES process conditions were established. The electrospun structures were analysed as to their nanostructure and CA retention. Geometry of the nanostructures obtained from the PCL systems was nanofibrillar with some beads, whereas it is particles that are mainly deposited for starch systems. PCL systems yielded better CA encapsulation efficiency (EE) than the polar ones, where greater variability was observed. The best EE (around 80%) was obtained for 15% PCL regardless of the CA ratio., The authors would like to thank the Ministerio de Economia y Competitividad of Spain, for funding this study as part of projects AGL2013-42989-R and AGL2016-76699-R and predoctoral research grant # BES-2014-068100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bomba rice conservation with a natural biofilm

  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Giménez, Silvia
  • Ibañez, M.D.
  • Blazquez, M.A.
[EN] The chemical composition of commercial Syzygium aromaticum, Cinnamomum verum, and Laurus nobilis essential oils as well as their antifungal activity against four pathogenic fungi isolated from Mediterranean rice grains has been investigated. Eighty nine compounds accounting for between 98.5 and 99.4% of the total essential oil were identified. The phenylpropanoids eugenol (89.37 ± 0.29%) and eugenol (56.34 ± 0.41%), followed by eugenol acetate (19.48 ± 0.13%) were, respectively, the main compounds in clove and cinnamon essential oils, whereas large amounts of the oxygenated monoterpenes 1,8-cineole (58.07 ± 0.83%) and ¿-terpinyl acetate (13.05 ± 0.44%) were found in bay leaf essential oil. Clove and cinnamon oils showed the best antifungal activity results against all tested fungi. Against Alternaria alternata, clove essential oil displayed the best antifungal effect, whereas against Curvularia hawaiiensis, cinnamon essential oil was more active. Both essential oils showed a similar antifungal effect towards Fusarium proliferatum and Fusarium oxysporum. In vitro studies in inoculated rice grains showed that clove and cinnamon totally inhibited pathogenic fungal development after 30 days of incubation. In vivo studies showed that eugenol used with a polysaccharide such as agar¿agar formed a fine coat which wraps the inoculated rice grains, creating a natural biofilm and reducing the development of all pathogenic fungi (80¿95%) for 30 days., This study has been financed by the Ministerio de Economia y Competitividad; Subdireccion General de Proyectos de Investigacion; Convocatoria de Ayudas a Proyectos de I+D+i; Research Challenges and Program-Oriented Societal Challenges 2014-2017, reference number AGL2013-42989-R-AR. The authors also thank the Central Service for Experimental Research of the University of Valencia (SCSIE) for providing the gas chromatography-mass spectrometry equipment and the Coleccion Espanola de Cultivos Tipo (CECT) for providing equipment for molecular identification of strains.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bioactivity of essential oils in phytopathogenic and post-harvest fungi control

  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Ibañez, M. D.
  • Marques, M.
  • Giménez, S.
  • Blazquez, M. A.
[EN] Commercial thyme and lavender essential oils were analysed by GC/MS. Sixty-six compounds accounting for 98.6¿99.6% of total essential oil were identified. Thymol (52.14 ± 0.21%), followed by pcymene (32.24 ± 0.16%), carvacrol (3.71 ± 0.01%) and ¿-terpinene (3.34 ± 0.02%), were the main compounds in thyme essential oil, while large amounts of oxygenated monoterpenes linalool acetate (37.07 ± 0.24%) and linalool (30.16 ± 0.06%) were found in lavender one. In vitro antifungal activity of the essential oils was evaluated at 200 and 300 ¿g/mL against 10 phytopathogenic and post-harvest fungi, which significantly affect agriculture. Micelial growth inhibition was calculated for each tested fungus and dose. Thyme essential oil showed satisfactory results with 90¿100% growth inhibition in almost all the assayed fungi at 300 ¿g/mL, while lavender essential oil showed no noteworthy inhibition data at either dose, and its growth was even enhanced. Thyme essential oil represents a natural alternative to control harvest and post-harvest fungi, and to extend the shelf-life of agriculture products., This study has been financed by the Spanish Ministry of Economy and Competitiveness, Programme-oriented Societal Challenges 2014-2017 [grantnumber AGL2013-42989-R-AR].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Poly(lactic) acid (PLA) and starch bilayer films, containing cinnamaldehyde, obtained by compression moulding

  • Muller, Justine
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Bilayer films from thermoplastic starch and cast amorphous PLA were obtained by compression moulding, incorporating or not cinnamaldehyde in the PLA layer. Films were characterized as to their microstructure and barrier, tensile and optical properties, as well as thermal behaviour, X-ray diffraction pattern and FTIR spectra. Bilayers using semicrystalline PLA, instead of starch, were also analysed for comparison purposes. Despite the lower ratio of cast PLA sheet in the bilayer assembly (about 1/3 of the film thickness), a great improvement in tensile and water vapour barrier properties was achieved with respect to the net starch films, the films maintaining high transparency and oxygen permeability as low as starch films. When cinnamaldehyde was included in the cast PLA sheet, films became thinner dim to the losses of the volatile active during processing, but the improvement in barrier properties was maintained, with lower mechanical resistance. Thermal analyses revealed diffusion of cinnamaldehyde or low molecular weight compounds from cast PLA layer to the adhered sheets (starch or semicrystalline PLA) which contributed to plasticizing the amorphous regions and affected crystallization pattern of PLA, as also revealed by the X-ray diffraction patterns. The obtained results offer an interesting option to obtain high barrier-highly resistant active films from thermoplastic starch and amorphous PLA, including cinnamaldehyde as active compound., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2013-42989-R and AGL2016-76699-R. Author Justine Muller thanks the Generalitat Valenciana for the Santiago Grisolia Grant (GRISOLIA/2014/003). Authors acknowledge the support of Elmira Arab-Tehrany from LIBio, University of Lorraine (France), for the research stay of Justine Muller carrying out the ATR-FTIR and X-Ray Diffraction analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical and Antimicrobial Properties of Compression-Molded Cassava Starch-Chitosan Films for Meat Preservation

  • Valencia-Sullca, Cristina Encarnación
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cassava starch-chitosan films were obtained by melt bending and compression molding, using glycerol and polyethylene glycol as plasticizers. Both the starch/chitosan and the polymer/plasticizer ratios were varied in order to analyze their effect on the physical properties of the films. Additionally, the antimicrobial activity of 70:30 polymer:plasticizer films was tested in cold-stored pork meat slices as affected by chitosan content. All film components were thermally stable up to 200 A degrees C, which guaranteed their thermostability during film processing. Starch and chitosan had limited miscibility by melt blending, which resulted in heterogeneous film microstructure. Polyethylene glycol partially crystallized in the films, to a greater extent as the chitosan ratio increased, which limited its plasticizing effect. The films with the highest plasticizer ratio were more permeable to water vapor, less rigid, and less resistant to break. The variation in the chitosan content did not have a significant effect on water vapor permeability. As the chitosan proportion increased, the films became less stretchable, more rigid, and more resistant to break, with a more saturated yellowish color. The incorporation of the highest amount of chitosan in the films led to the reduction in coliforms and total aerobic counts of cold-stored pork meat slices, thus extending their shelf-life., The authors acknowledge the financial support provided by the Spanish Ministerio de Economia y Competividad (Projects AGL2013-42989-R and AGL2016-76699-R). Author Cristina Valencia-Sullca thanks the Peruvian Grant National Program (PRONABEC Grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Active starch-gelatin films for shelf-life extension of marinated salmon

  • Moreno Marro, Olga
  • Gil, Agueda
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Biodegradable active films were obtained by casting, using glycerol plasticized oxidized corn starch (OS) and bovine gelatine (BG) blends (1:1 mass ratio), with and without ethyl lauroyl arginate (LAE) as antimicrobial agent (13 g LAE/100 g polymer). Water vapour barrier capacity and colour of the films conditioned at 53 or 88% relative humidity were determined. Both LAE incorporation and high RH promoted film browning, coherently with the progression of Maillard reactions between amino groups of gelatine or LAE and carbonyl groups of oxidized starch. These compounds imparted antimicrobial properties to the films with and without LAE, both exhibiting antilisterial activity in in vitro tests. Packaging of marinated salmon samples in these films greatly reduced the total viable counts, which remained below the legal limit after 45 storage days at 5 degrees C. Nevertheless, films were not effective at controlling weight loss of salmon samples during the cold storage., The authors acknowledge the financial support provided by Ministerio de Economia y Competividad (Projects AGL2013-42989-R and AGL2016-76699-R). Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)] active bilayer filmsobtained by compression moulding and applying essential oils at the interface

  • Requena-Peris, Raquel
  • Jiménez Marco, Alberto
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Four active components, oregano essential oil (OR) and its respective main compound carvacrol (CA) and clove essential oil (CLO) and its respective main compound eugenol (EU), were used separately to obtain, using compression moulding, poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)] (PHBV) bilayer films with antimicrobial activity. The active compounds were sprayed (15% w/w, polymer to active compound ratio) at the interface between two layers of PHBV, which were joined using thermo-compression. Tensile, barrier and optical properties, as well as thermal behaviour, of the films were characterized after one week at 25 ∘C and 53% relative humidity. Likewise, the antimicrobial activity of the films was evaluated against Escherichia coli and Listeria innocua. Although the tensile properties of the films were not improved with respect to pure PHBV films by the addition of the active compounds, more transparent materials with better water vapour barrier capacity were obtained. Thermogravimetric analyses showed that CA and EU slightly decreased the polymer thermal stability, while OR and CLO led to more thermally resistant material. Miscibility of actives with the polymer was assessed through the promoted decrease in melting temperature and degree of crystallinity. PHBV films allowed the release of the active compounds in adequate amounts and at adequate rates into culture media to control themicrobial growth of the two tested bacteria. The films were significantly more effective against E. coli than against L. innocua. Both bacteria were more sensitive to OR and to its main compound, CA, due to the greater antimicrobial effectiveness of these components., The authors thank the Ministerio de Economía y Competitividad – Government of Spain for financial support provided through AGL2013-42989-R Project. RR thanks the Ministerio de Educación, Cultura y Deporte – Government of Spain for an FPU Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Commercial Laurus nobilis L. and Syzygium aromaticum L. Men. &amp, Perry essential oils against post-harvest phytopathogenic fungi on rice

  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Gimenez, Silvia
  • Blazquez Ferrer, Maria Amparo
[EN] Rice is exposed in the field and in stored conditions to a great variety of fungi that can cause a lot of diseases with potential risk to consumers. In the present study, the chemical composition of commercial Laurus nobilis L. and Syzygium aromaticum L. Merr. & Perry essential oils and antifungal activity against five pathogenic fungi isolated from Mediterranean rice grains has been investigated. Thirty-seven compounds accounting for more than 99.5% of the total essential oil were identified by GC and GC/MS. 1,8-Cineole (51.95%), alpha-terpinyl acetate (12.93%) and the monoterpene hydrocarbon sabinene (9.56%) were the main compounds in bay leaf essential oil, while the phenylpropanoid eugenol (88.58%), and the sesquiterpene hydrocarbons beta-caryophyllene (8.13%) and alpha-humulene (2.35%) were found in clove essential oil. Clove essential oils at 300 mu g/mL showed more antifungal effect than bay leaf essential oil against all tested strains. S. aromaticum essential oil showed the best antifungal activity towards Fusarium graminearum and similar antifungal activity compared to pure eugenol against all tested phytopathogenic fungi. In inoculated rice grain, clove essential oil significantly reduced the fungal infection in food so S. aromaticum essential oil could be a good alternative as preservative in stored rice grain. (C) 2015 Elsevier Ltd. All rights reserved., This study has been financed by the Ministerio de Economia y Competitividad; Subdireccion General de Proyectos de Investigacion; Convocatoria de Ayudas a Proyectos de I+D+i; Research Challenges; Programme-oriented Societal Challenges 2014-2017, reference number AGL2013-42989-R-AR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biopolymers Carrying Essential Oils, or their Compounds, for Food Antimicrobial Packaging

  • Requena-Peris, Raquel
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Background: Biodegradable antimicrobial materials for food packaging applications are in great demand by the food industry and society alike for the purposes of extending food shelf life, thus reducing the environmental impacts associated with synthetic plastics. Among the natural and non-toxic active compounds available, essential oils and their major components have been widely studied due to their antioxidant and antimicrobial properties together with their Generally Recognized as Safe status. Objective: In this review, the antimicrobial and antioxidant properties of several essential oils and their major compounds are summarized, as well as their action when included in different biopolymer-based matrices. Both the method of incorporating active ingredients into the biopolymer matrix and the yield of such processes as a function of the technique used (casting methods or thermoplastic processing) are also assessed. The effect of active compounds on the functional properties of the films is reviewed, as well as the effective release of the active ingredients into different food systems and food simulants, as affected by polymer-active interactions and the nature of the food. Conclusion: Finally, the antimicrobial action of some of these active compounds (embedded in different biopolymer matrices) is also discussed both in in vitro studies and in antimicrobial tests performed using foods of different compositions., The authors acknowledge the financial support provided by Ministerio de Economia y Competividad (Project AGL2013-42989-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antifungal starch-based edible films containing Aloe vera

  • Ortega-Toro, Rodrigo
  • Collazo-Bigliardi, Sofía
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Aloe vera gel, analysed as to its antifungal properties against six fungi causing plant diseases, was found to be most effective against Fusarium oxysporum. It was included in different ratios in starch based films plastiziced with glycerol to obtain antifungal films. These were characterized as to their physical (barrier and optical) and structural properties. Films containing the highest ratio of Aloe vera solids (1:1, with respect to starch) and different glycerol mass ratios with respect to starch (0.15 and 0.25) were analysed as to the water sorption and water plasticization effects, in order to discover the water sensitivity of the films in different RH ambients. Films with 0.15 g glycerol/g starch were more homogenous, with a lower degree of starch crystallization, reduced water vapour permeability and higher gloss and transparency. These films with the highest Aloe vera ratio were effective at controlling fungal decay and weight loss in cherry tomatoes. (C) 2017 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2013-42989-R and AGL2016-76699-R. Rodrigo Ortega-Toro thanks Universidad Nacional Abierta y a Distancia from Colombia for their support through project PIE-01 2016. Authors also thank the Electron Microscopy Service of the Universitat Politecnica de Valencia for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of starch oxidation on the functionality of starch-gelatin based active films

  • Moreno Marro, Olga
  • Cárdenas Estela, Julián
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Biodegradable active films were prepared by casting, using corn starch, with differing oxidation degree, bovine gelatin, glycerol, as a plasticizer, and ethyl lauroyl arginate (LAE) as antimicrobial compound. The films were characterized as to their microstructure, physical properties and water affinity. Starch oxidation with sodium periodate (SP) greatly improved polymer compatibility and crosslinking, especially at 1: 1 glucose: SP molar ratio, which promoted the films' strength (40-92%) and barrier capacity (33 and 40% reduction in water vapour and oxygen permeability, respectively in LAE-free films), while Maillard reactions promoted the film browning. LAE, with amino and carbonyl groups, participated in the condensation reactions, interfering in the network crosslinking. All films with LAE showed bactericidal effect against Listeria innocua and Escherichia coli and LAE free films with oxidized starch inhibited the growth of both bacteria by 1-2 log CFU, due to the antimicrobial properties of Maillard compounds. Blend films with the most oxidized starch and gelatin containing LAE are promising materials for food packaging applications., The authors acknowledge the financial support provided by Ministerio de Economia, Industria y Competitividad (Projects AGL2013-42989-R and AGL2016-76699-R). The authors also thank Oscar Gil and Amparo Ribes from the Institute of Materials Technology (UPV) for the support and assistance in the use of the infrared spectrometer and the services rendered by the Electron Microscopy Service of the UPV. Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical and structural properties and thermal behaviour of starch-poly(ɛ-caprolactone) blend films for food packaging

  • Ortega Toro, Rodrigo
  • Contreras, Jessica
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Structural and physical properties (barrier, mechanical, and optical properties) and thermal behaviour of corn starch-PCL blend films, containing glycerol as plasticizer, obtained by compression moulding, at 160 °C and 130 bars, were studied. The stability on the films properties was also evaluated. Blend films showed phase separation of the polymers in a heterogeneous matrix with starch rich regions and PCL rich regions. Nevertheless, a small miscibility of PCL in the starch phase was detected trough the shift in the glass transition temperature of the starch phase, which leads to a partial inhibition of amylose crystallization during film formation and storage. The lack of interfacial adhesion of PCL and starch phases promoted films fragility and reduced stretchability, although elastic modulus of the films with small PCL ratios increased. Water barrier properties of starch films were improved as the PCL increased in the blend, but oxygen permeability increased. Due to the food compatibility of this polymer blends (without any toxic compound) these could be an interesting alternative for food packaging, where some drawbacks of starch films has been overcome., The authors acknowledge the financial support from the Ministerio de Economi'a y Competitividad (Spain) throughout the project AGL2013-42989-R. Rodrigo Ortega-Toro thanks the Conselleria de Educacio de la Comunitat Valenciana for the Santiago Grisolia grant. Authors also thank to Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of cellulose nanocrystals on the properties of pea starch-poly(vinyl alcohol) blend films

  • Fortunati, Elena
  • Cano Embuena, Amalia Isabel
  • Kenny, J.M.
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Incorporation of cellulose nanocrystals (CNC) to pea starch-poly(vinyl alcohol) (PVA) (1:2 ratio) blend films was carried out in order to improve their physical properties. Different ratios (1, 3 and 5 % wt) of CNC were used and structural, thermal and physical (barrier, mechanical and optical) properties were analysed in comparison to the control film without CNC. Incorporation of CNC enhanced phase separation of polymers in two layers. The upper PVA rich phase contained lumps of starch which emerged from the film surface, thus reducing the film gloss. CNC were dispersed in both polymeric phases as aggregates, whose size increased with the CNC ratio rise. CNC addition did not implied changes in water vapour barrier of the films, but they became slightly stiffer and more stretchable, while crystallization of PVA was partially inhibited., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the Projects AGL2010-20694 and AGL2013-42989-R. Amalia Cano also thanks the Spanish Ministerio de Educacion, Cultura y Deporte for the FPU grant and COST-STSM-FA1001-14253 for the financial support for the collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Carvacrol encapsulation by electrospinning or solvent casting to obtain biodegradable multilayer active films for food packaging applications

  • Tampau, Alina
[ES] El uso masivo de plásticos sintéticos y su impacto medioambiental obliga a buscar alternativas biodegradables para el envasado de los alimentos,etapa necesaria para su adecuada conservación.Así mismo,la necesidad de incrementar la vida útil de los alimentos ha despertado gran interés en el desarrollo de materiales activos(antimicrobianos y antioxidantes)que mantengan su calidad y seguridad por más tiempo,mediante el uso de compuestos de origen natural,seguros para el consumidor.En este sentido,el desarrollo de materiales biodegradables activos para el envasado de alimentos constituye hoy en día un reto importante para la industria alimentaria.En la presente Tesis Doctoral,se ha estudiado la encapsulación de carvacrol mediante el electroestirado o extensión y secado de diferentes disoluciones poliméricas con carvacrol.Se han utilizado polímeros biodegradables portadores de diferente polaridad(almidón termoplástico:TPS,polivinil-alcohol:PVA, policaprolactona:PCL o ácido poliláctico:PLA)disueltos en el solvente adecuado,con el fin de obtener capas activas.Estas capas se han combinado con otras de polímeros con propiedades complementarias,para obtener laminados activos adecuados para el envasado de alimentos.Los laminados combinaron polímeros polares(TPS o PVA)y poliésteres no polares(PCL o PLA)incorporando el carvacrol en una de las capas.Se evaluó la cinética de liberación del activo,así como la acción antimicrobiana de los materiales obtenidos.Los laminados se caracterizaron en su funcionalidad como material de envase(prop. de barrera,mecánicas u ópticas)así como en su estructura y comportamiento térmico.Los estudios de encapsulación revelaron un mayor potencial encapsulante del carvacrol para los polímeros no polares(PCL;PLA),aunque el PVA mostró también una buena afinidad con el compuesto activo.La matriz de PVA mostró una mayor retención de carvacrol mediante electroestirado de sus disoluciones acuosas que por extensión y secado,sin necesidad de adición de tensoactivos como el Tween85.Para la encapsulación en PLA,se usaron mezclas binarias de solventes aptos para contacto con los alimentos(acetato de etilo y DMSO).En este caso,se obtuvo una mayor eficiencia encapsulante del PLA en los materiales obtenidos por extensión y secado que en los electroestirados.La cinética de liberación del carvacrol de las fibras de PCL explicó el mayor efecto antibacteriano contra E.coli,y el escaso efecto antilisteria.La velocidad de liberación del activo aumentó cuando disminuyó la polaridad de los simulantes alimentarios, mostrando una liberación completa en los sistemas apolares,pero solo hasta 75% en los sistemas acuosos,que requerirían una mayor proporción del activo en el envase para potenciar su efectividad.La combinación de láminas de TPS con fibras de PCL cargadas con carvacrol dio lugar a materiales con una permeabilidad al vapor de agua mejorada,en comparación con los films de almidón,sin efectos relevantes sobre las otras propiedades funcionales estudiadas.Cuando los laminados se probaron in vitro contra cepas G(+) y G(-) mostraron un efecto antibacteriano similar al de las fibras de PCL con carvacrol,pero retrasado en el tiempo.Los estudios de desintegración-biodegradación de los laminados almidón-PCL revelaron que las películas con carvacrol afectaron la actividad del inóculo del compost,disminuyendo ligeramente la biodegradabilidad de las películas,pero alcanzando valores de desintegración similares(75-80%)a las muestras libres de carvacrol.Se obtuvieron también laminados de PLA y PVA mediante la extensión y secado de disoluciones acuosas de PVA con carvacrol.La superficie del PLA fue sometida a aminolización a fin de mejorar la extensibilidad de las disoluciones acuosas.A pesar del incremento de la componente polar de la energía superficial del PLA y su mejorada humectabilidad con las soluciones de PVA,estas bicapas no mostraron una mejora significativa en las propied, [CA] L'ús massiu de plàstics sintètics i el seu impacte mediambiental obliga a buscar alternatives biodegradables per a l'envasament dels aliments necessari per a la seua conservació.Així mateix,la necessitat d'incrementar la vida útil dels aliments ha despertat gran interés en el desenvolupament de materials actius(antimicrobians i antioxidants)que mantinguen la seua qualitat i seguretat per més temps,per mitjà de l'ús de compostos d'origen natural,segurs per al consumidor.En este sentit,el desenvolupament de materials biodegradables actius per a l'envasament d'aliments constituïx un repte important per a la indústria alimentària.En la present Tesi Doctoral,s'ha estudiat l'encapsulació de carvacrol per mitjà de l'electroestirat o extensió i assecat de diferents dissolucions polimèriques amb carvacrol.S'han utilitzat polímers biodegradables portadors de diferent polaritat(midó termoplàstic:TPS, polivinil-alcohol:PVA, policaprolactona:PCL o àcid poliláctic:PLA)dissolts en el solvent adequat,a fi d'obtindre capes actives.Estes s'han combinat amb altres de polímers amb propietats complementàries,per a obtindre laminats actius adequats per a l'envasament d'aliments.Els laminats van combinar polímers polars(TPS o PVA)i poliésters no polars(PCL o PLA)incorporant el carvacrol en una de les capes.Es va avaluar la cinètica d'alliberament de l'actiu,així com l'acció antimicrobiana dels materials obtinguts.Els laminats es van caracteritzar en la seua funcionalitat com a material d'envàs(propietats de barrera, mecàniques o òptiques),així com en la seua estructura i comportament tèrmic.Els estudis d'encapsulació van revelar un major potencial encapsulant del carvacrol per als polímers no polars(PCL i PLA),encara que el PVA va mostrar també una bona afinitat amb el compost actiu.La matriu de PVA va mostrar una major retenció de carvacrol per mitjà d'electroestirat de les seues dissolucions aquoses que per extensió i assecat,sense necessitat d'addició de tensioactius com el Tween 85.Per a l'encapsulació en PLA,es van usar mescles binàries de solvents aptes per a contacte amb els aliments(acetat d'etil i DMSO).Es va obtindre una major eficiència encapsulant del PLA en els materials obtinguts per extensió i assecat que en els electroestirats.La cinètica d'alliberament del carvacrol de les fibres de PCL va explicar el major efecte antibacterià contra Escherichia coli,i l'escàs efecte antilisteria.La velocitat d'alliberament de l'actiu va augmentar quan va disminuir la polaritat dels simulants alimentaris,mostrant un alliberament complet en els sistemes no polars, però només fins a un 75% en els sistemes aquosos,que requeririen una major proporció de l'actiu en l'envàs per a potenciar la seua efectivitat.La combinació de làmines de TPS amb fibres de PCL carregades amb carvacrol va donar lloc a materials amb una permeabilitat al vapor d'aigua millorada,en comparació amb els films de midó, sense efectes rellevants sobre les altres propietats funcionals.Quan els laminats es van provar in vitro contra ceps Gram(+) i Gram(-) van mostrar un efecte antibacterià semblant al de les fibres de PCL amb carvacrol,però retardat en el temps.Els estudis de desintegració-biodegradació dels laminats midó-PCL van revelar que les pel·lícules amb carvacrol van afectar l'activitat de l'inocule del compost,disminuint lleugerament la biodegradabilitat,però aconseguint valors de desintegració semblants(75-80%)a les mostres lliures de carvacrol.Es van obtindre també laminats de PLA i PVA per mitjà de l'extensió i assecat de dissolucions aquoses de PVA amb carvacrol.La superfície del PLA va ser sotmesa a aminolizatció a fi de millorar l'extensibilitat de les dissolucions aquoses.A pesar de l'increment de la component polar de l'energia superficial del PLA i la seua millorada mullabilitat amb les solucions de PVA,estes bicapes no van mostrar una millora significativa en les propietats mecàniques i de barrera, [EN] The massive use of synthetic plastics and their environmental impact makes necessary the search for biodegradable alternatives for food packaging. Likewise, the need to increase the shelf life of food has aroused great interest in the development of active materials (antimicrobial and antioxidant) that maintain food quality and safety for longer periods of time through the use of compounds of natural origin, safe for the consumer. In this sense, the development of active biodegradable materials for food packaging is both a major imperative and challenge for the food industry today. In the present Doctoral Thesis, the encapsulation of carvacrol has been studied by means of the electrospinning or casting of different polymeric solutions with carvacrol. Biodegradable polymers with different polarities (thermoplastic starch: TPS, poly(vinyl-alcohol): PVA, poly-(¿-caprolactone): PCL or poly(lactic acid): PLA) dissolved in the appropriate solvent have been used to obtain active layers. These have been combined with other polymers with complementary properties, to obtain active laminates suitable for food packaging. The laminates combined polar polymers (TPS or PVA) and non-polar polyesters (PCL or PLA) incorporating carvacrol in one of the layers. The release kinetics of the active ingredient was evaluated, as well as the antimicrobial action of the materials obtained. The laminates were characterized in their functionality as a packaging material (barrier, mechanical or optical properties), as well as in their structure and thermal behaviour. Encapsulation studies revealed a higher encapsulating potential of carvacrol for non-polar polymers (PCL and PLA), although PVA also showed a good affinity with the active compound. The PVA matrix showed a higher retention of carvacrol by electrospinning of its aqueous solutions than by casting, without the need for addition of surfactants such as Tween 85. For the encapsulation in PLA, binary mixtures of solvents suitable for food contact (ethyl acetate and DMSO) were used. A higher encapsulation efficiency of PLA was obtained in the materials produced by casting than by electrospinning. The carvacrol release kinetics of PCL fibres explained the higher antibacterial effect against Escherichia coli and the lower antilisterial effect. The release ratio of the active ingredient increased when the polarity of the food simulants decreased, showing a complete release in non-polar systems and only up to 75% in aqueous systems that would require a higher proportion of the active ingredient in the packaging material to enhance its effectiveness. The combination of TPS films with carvacrol loaded PCL fibres resulted in materials with improved water vapour permeabilities, compared to starch films, with no relevant effects on the other functional properties. When the laminates were tested in vitro against Gram (+) and Gram (-) strains, they showed a similar antibacterial effect to that of PCL fibres with carvacrol, but delayed in time. Disintegration-biodegradation studies of PCL-starch laminates revealed that carvacrol films affected the activity of the compost inoculum, slightly decreasing the biodegradability of the laminates, but reaching similar disintegration values (75-80%) to the carvacrol-free samples. PLA and PVA laminates were also obtained by casting aqueous PVA solutions with carvacrol. The surface of PLA was submitted to aminolization in order to improve the extensibility of the aqueous solutions. Despite the increase in the polar component of the PLA surface energy and its improved wettability with PVA solutions, these bilayers did not show significant improvement in mechanical and barrier properties over the PLA monolayers., The authors would like to thank the Ministerio de Economia y Competitividad of Spain, for funding this study as part of projects AGL2013-42989-R and AGL2016-76699-R and predoctoral research grant # BES-2014-068100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical and antimicrobial properties of starch-PVA blend films as affected by the incorporation of natural antimicrobial agents

  • Cano Embuena, Amalia Isabel
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] In this work, active films based on starch and PVA (S:PVA ratio of 2:1) were developed by incorporating neem (NO) and oregano essential oils (OEO). First, a screening of the antifungal effectiveness of different natural extracts (echinacea, horsetail extract, liquid smoke and neem seed oil) against two fungus (P. expansum and A. niger) was carried out. The effect of NO and OEO incorporation on the films¿ physical and antimicrobial properties was analyzed. Only composite films containing OEO exhibited antibacterial and antifungal activity. Antibacterial activity occurred at low OEO concentration (6.7%), while antifungal effect required higher doses of OEO in the films. Incorporation of oils did not notably affect the water sorption capacity and water vapor barrier properties of S-PVA films, but reduced their transparency and gloss, especially at the highest concentrations. The mechanical response of the S-PVA films was also negatively affected by oil incorporation but this was only relevant at the highest oil ratio (22%). S-PVA films with 6.7% of OEO exhibited the best physical properties, without significant differences with respect to the S-PVA matrix, while exhibiting antibacterial activity. Thus, the use of OEO as a natural antimicrobial incorporated into starch-PVA films represents a good and novel alternative in food packaging applications., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2013-42989-R. Amalia Cano also thanks the Spanish Ministerio de Educacion, Cultura y Deporte for the FPU grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antimicrobial properties and release of cinnamaldehyde in bilayer films based on polylactic acid (PLA) and starch

  • Muller, Justine
  • Casado Quesada, Alba
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cinnamaldehyde (CIN) loaded amorphous PLA films were obtained by casting, using ethyl acetate as solvent. Likewise, bilayer films were obtained by thermocompression of the PLA active layer and compression moulded cassava starch (S) films or semi crystalline PLA films. Starch-PLA laminated materials were considered to improve the barrier capacity (high oxygen barrier through the starch layer and high water vapour capacity through the polyester layer), while CIN incorporation confers antimicrobial activity on the films. The PLA bilayers were obtained for comparison purposes. The antimicrobial activity of the CIN loaded PLA films and S bilayer films was proved against Escherichia coli and Listeria Innocua through in vitro tests, which indicates that the active amount released into the growth medium exceeded the minimum inhibitory concentration (MIC) of both bacteria. The release kinetics of the active compound in different food simulants demonstrated that a part of CIN was tightly bonded to the PLA matrix, whereas the free compound diffused more easily through the starch layer, making S bilayers more active against the bacteria when the starch layer was in direct contact with the culture medium. CIN entrapped in PLA bilayers did not exhibited any antibacterial effect due to its release inhibition, associated to its bonding within the PLA matrix and the lower degree of relaxation in the semi crystalline PLA layer in contact with the food simulants., The authors thank the Ministerio de Economia y Competitividad (Spain) for the financial support provided through Project AGL2013-42989-R and AGL2016-76699-R. Author Justine Muller thanks the Generalitat Valenciana for the Santiago Grisolia Grant (GRISOLIA/2014/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect on tomato plant and fruit of the application of biopolymer¿oregano essential oil coatings

  • Perdones Montero, Ángela
  • Tur, Núria
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vargas, Maria|||0000-0001-6024-0952
[EN] BACKGROUND: Oregano essential oil (EO) was incorporated into film-forming dispersions (FFDs) based on biopolymers (chitosan and/or methylcellulose) at two different concentrations. The effect of the application of the FFDs was evaluated on tomato plants (cultivar Micro-Tom) at three different stages of development, and on pre-harvest and postharvest applications on tomato fruit. RESULTS: The application of the FFDs at '3 Leaves' stage caused phytotoxic problems, whichwere lethal when the EO was applied without biopolymers. Even though plant growth and development were delayed, the total biomass and the crop yield were not affected by biopolymer-EO treatments. When the FFDs were applied in the 'Fruit' stage the pre-harvest application of FFDs had no negative effects. All FFDs containing EO significantly reduced the respiration rate of tomato fruit and diminished weight loss during storage. Moreover, biopolymer-EO FFDs led to a decrease in the fungal decay of tomato fruit inoculated with Rhizopus stolonifer spores, as compared with non-treated tomato fruit and those coated with FFDs without EO. CONCLUSION: The application of biopolymer-oregano essential oil coatings has been proven to be an effective treatment to control R. stolonifer in tomato fruit. (C) 2016 Society of Chemical Industry, The authors acknowledge the support provided by Universitat Politecnica de Valencia (SP20120518) and the Spanish Ministerio de Economia y Competitividad (AGL2013-42989-R-AR). Angela Perdones is grateful to Universitat Politecnia de Valencia for a FPI grant
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antifungal films based on starch-gelatin blend, containing essential oils

  • Acosta-Davila, Sandra Cecilia
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
[EN] The antimicrobial activity of essential oils (EO) is very well-known and it has been reported that incorporating them into edible films based on biopolymers extends the food's shelf-life. In this study, cinnamon, clove and oregano EO, at 25% with respect to the polymer, were incorporated into glycerol plasticized starch-gelatin blend films (ratio 1:1) in order to elucidate their effect on the physical (barrier, mechanical and optical), structural and antifungal properties of the films. Whereas EOs exhibited no significant effect on tensile behavior in the case of casting films conditioned at 53% relative humidity and 25 degrees C, the EO compounds did significantly reduce the water vapor and oxygen permeability of the films. Likewise, the EOs increased the films' transparency but reduced their gloss. Despite the fact that about 60% of the incorporated EOs were lost during the film drying step, they exhibited antifungal activity against the two tested fungal species, Colletotrichum gloesporoides (CG) and Fusarium oxysporum (FOG), as revealed by the in vitro agar diffusion method. (C) 2016 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support provided by the Ministerio de Economia y Competitividad-Spanish Government (AGL2013-42989-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Starch-gelatin antimicrobial packaging materials to extend the shelf life of chicken breast fillets

  • Moreno Marro, Olga
  • Cruz-Romero, Malco C.
  • Kerry, Joseph
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Antimicrobial starch:gelatin (1:1) films containing N-¿-lauroyl-l-arginine ethyl ester monohydrochloride (LAE) (10 % wt.) were used as food contact active layers in chicken breast fillets vacuum-packaged in polyamide/polyethylene pouches. Active layers were thermoprocessed (TP) or cast (OC) on the plastic film. Oxidized starch was used in OC coatings. Packaged chicken breast samples were stored at 4¿°C and their physicochemical properties (pH, colour and lipid oxidation) and microbial quality were analysed throughout storage. Both TP and OC films significantly (p¿<¿0.05) extended the shelf life of chicken breast fillets compared to control samples. The starch oxidation reaction in OC films promoted the formation of Maillard reaction compounds in the starch-gelatine blends, which enhanced the antimicrobial effectiveness of the OC films, but also promoted oxidative processes. This greatly affected the pH and colour parameters in OC packaged samples. Therefore, TP blend films containing LAE are recommended since they effectively extended the shelf life of chicken breast fillets without affecting the meat oxidation., The authors acknowledge the financial support provided by Ministerio de Economia y Competividad (Projects AGL2016-76699-R and AGL2013-42989-R). Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Release kinetics of carvacrol and eugenol from poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) films for food packaging applications

  • Requena-Peris, Raquel
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] 13 wt.% of active compounds (carvacrol-CA, eugenol-EU) were obtained by spraying the active between PHBV layers and their subsequent adhesion. Release kinetics of CA and EU in food simulants of different polarity was analysed and the films antimicrobial activity was predicted, taking the minimal inhibitory concentration against some foodborne pathogens into account. Overall migration values were also determined. At equilibrium, an almost total release of both CA and EU occurred in 50% ethanol, about 20 and 50% of CA and EU, respectively, was delivered in the more aqueous simulants and 65 70% in fatty systems. The release rate increased when the polarity of aqueous simulants decreased, but it fell markedly in fatty systems. EU was released faster than CA in the less polar simulants, but more slowly in the more aqueous systems., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2013-42989-R and AGL2016-76699-R. Author Raquel Requena thanks the Ministry of Education, Culture and Sport (Spain) for the FPU (FPU13/03444) Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antioxidant starch-based films with encapsulated eugenol. Application to sunflower oil preservation

  • Talón-Argente, Emmanuelle
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Starch films containing eugenol, which was added to the film-forming dispersion in free form or encapsulated with different wall materials (whey protein or lecithin), were obtained by casting. The physical and the antioxidant properties of the films, the release kinetics of eugenol in different food simulants and their performance at preventing sunflower oil oxidation during storage were evaluated. Encapsulated eugenol modified the film microstructure, yielding less stretchable films with reduced water affinity, transparency and oxygen permeability as compared to films formulated with non-encapsulated eugenol. The addition of eugenol microcapsules containing oleic acid promoted the eugenol retention in the starch matrix during film formation and thus, these films exhibited the greatest antioxidant activity. Films developed with encapsulated eugenol powder containing lecithin and oleic acid were highly effective at preventing sunflower oil oxidation even throughout 53 days of storage at 30¿°C, maintaining low and almost constant values of peroxide index, conjugated dienes and trienes in comparison with the control samples., The authors acknowledge the financial support provided by the Spanish Ministerio de Educacion y Ciencia (Projects AGL2013-42989-R and AGL2016-76699-R). Author Emma Talon thanks the Universitat Politecnica de Valencia for a FPI Grant (99/2011). The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the incorporation of antimicrobial/antioxidant proteins on the properties of potato starch films

  • Moreno Marro, Olga
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Glycerol plasticized potato starch films containing bioactive proteins (lactoferrin (LF) and/or lysozyme (LZ), at 0.1 and 0.2 ratio with respect to starch) were obtained by casting method and characterized as to their microstructural, thermal and physical (water content, mechanical, water and oxygen barrier, optical) properties. The bioactive properties, named antioxidant and antimicrobial, of the proteins and the films were also characterized. The incorporation of proteins affected the structural and physical properties of potato starch films, while modifying their thermal behavior and increasing the glass transition temperature. Both proteins showed a certain degree of compatibility with starch chains through the bond formations (increase in Tg), while a part is separated and migrates to the film surface. Their incorporation, especially that of lactoferrin, greatly increased the film s brittleness, regardless of the films water content, although they enhance the water vapor and oxygen barrier properties, whatever the age of the film. Protein also reduced the film s transparency and gloss, while lactoferrin induced color changes. The thermal degradation of blend films and isolated proteins occurred at temperatures of over 250 &#9702;C, which means that blend starch films can be thermoprocessed, according to their thermoplastic properties and following the usual practices of the plastics industries. A synergistic antimicrobial action against Escherichia coli and coliforms was observed when both LZ and LF were simultaneously applied. Both of these exhibited antioxidant capacity., The authors acknowledge the financial support provided by the Generalitat Valenciana (GV/2013/152) and Ministerio de Economia y Competividad (Projects AGL2013-42989-R) and the services rendered by the Electron Microscopy Service of the UPV. Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Release of polyphenols from starch-chitosan based films containing thyme extract

  • Talón-Argente, Emmanuelle
  • Trifkovic, Kata T.
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The release kinetics of thyme extract polyphenols (TE) from chitosan (CH), pea starch (S) and CH:S blend films in different solvents was evaluated, as well as their antioxidant activity in each release media. Pure starch films showed the fastest delivery rate and the highest delivery ratio of polyphenols, although the corresponding release media exhibited the lowest antioxidant capacity. TE provided CH based films with remarkable antioxidant activity, despite the lower polyphenol release obtained in all solvents, due to the strong polyphenols-chitosan interactions. The maximum amount of polyphenols delivered was found in the acetic acid solution, due to the high solubility of CH. The incorporation of tannic acid (TA) into CH films promoted cross-linking effect, which delays the TE release rate in water and ethanol aqueous solutions, except for CH:S:TA films. Thus, the polarity of the solvents and the polyphenols-matrix interactions markedly affected the polyphenol release and the antioxidant activity of the films., The authors acknowledge the financial support provided by the Spanish Ministerio de Economía y Competividad (Projects AGL2013-42989-R and AGL2016-76699-R). Author Emma Talón thanks Universitat Politècnica València for a FPI Grant (99/2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development and characterization of active films based on starch-PVA, containing silver nanoparticles

  • Cano Embuena, Amalia Isabel
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] In order to obtain antimicrobial packaging films, starch-PVA-based films with silver nanoparticles (AgNPs) have been developed and characterized as to their physical and antimicrobial properties and silver release kinetics to polar (A, B, C and D1) and non-polar (D2) food simulants. Antimicrobial activity against two bacteria, Listeria innocua and Escherichia coli, and two fungi, Aspergillus niger and Penicillium expansum, was studied. Silver-loaded starch-PVA films exhibited antimicrobial activity gainst the tested microorganisms, which depended heavily on the concentration of AgNPs. Their addition only led to notable physical changes in the colour and transparency of the films, which underwent significant changes and turned brownish-yellow and opaque, this being more notable when the silver concentration rose. Silver was released into aqueous simulants in its entirety within the first 60 min of contact. In the non-polar simulant (oleic acid), the release capacity of the films drastically decreased, being the only case where the established limit (60 mg/kg simulant) was met. As a consequence, the use of the developed films as food packaging materials should be restricted to fat-rich foodstuffs., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad through the project AGL2013-42989-R. Amalia Cano also thanks the Spanish Ministerio de Educacion, Cultura y Deporte for the FPU grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of properties of glycerol plasticized starch films by blending with a low ratio of polycaprolactone and/or polyethylene glycol

  • ORTEGA-TORO, RODRIGO
  • Muñoz, Amparo
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of the melt blending of polycaprolactone (PCL) (5 and 10 wt. %) and polyethylene glycol (PEG 4000 D) (2 wt. %) with corn thermoplastic starch (with 30 % glycerol) on film properties was studied through the characterization of the structural, thermal and physical properties of the films obtained by compression moulding, after 1 and 5 storage weeks. PCL and PEG decreased the glass transition temperature of starch, whereas no changes in PCL melting properties were observed. Starch films could incorporate 5% PCL without a notable phase separation, leading to more stretchable and stable films. Blend films with 10% PCL showed clear phase separation, without any improved tensile properties, but with lower water vapour permeability. In ternary systems, PEG reduced the PCL-starch affinity, enhancing phase separation, whereas it did not improve the film properties with respect to starch films, The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2013-42989-R. Rodrigo Ortega-Toro thanks the Conselleria de Educació de la Comunitat Valenciana for the Santiago Grisolía grant. Authors also thank to Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Grapefruit Seed Extract and Lemon Essential Oil as Active Agents in Corn Starch-Chitosan Blend Films

  • Bof, M.J.
  • Jiménez, A.
  • Locaso, D.E.
  • García, M.A.
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of lemon essential oil (LEO) and grapefruit seed extract (GSE) addition to starch-chitosan blend films on their functional properties and the associated structural changes were studied. Likewise, the films' antioxidant properties and antimicrobial activity against some molds and Gram (+) and Gram (-) bacteria was evaluated. Composite active films exhibited a yellowish color, especially in the case of LEO addition. Film microstructure was analyzed by SEM evidencing a good incorporation of GSE to film matrix, while LEO droplets were dispersed in the polymer blend. Oxygen and water vapor barrier properties were not notably modified by the presence of active agents. FTIR analyses revealed that hydrogen bonding occurs in the blend films as the main interaction mechanism between components. Films containing LEO or GSE were less stiff and resistant but more stretchable than the control ones, being this effect concentration dependent. No notable antimicrobial action was observed in the films, which suggest that the required final concentration of active compounds must be fitted considering the minimum inhibitory concentration (MIC) values for a specific microorganism and its release kinetics to the food matrix., The present work was financially supported by CONICET Argentina, UNLP, and ANPCyT (Project PICT 2011-1213)., This work was financially supported by the Project PICT 2011-1213 (ANPCyT, Argentina) and Project AGL2013-42989-R (Ministerio de Economía y Competitividad, España). M. J. Bof acknowledges to the Argentinean Scholarship Program for Professionals Abroad (Bec.ar).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of citric acid on the properties and stability of starch-polycaprolactone based films

  • Ortega Toro, Rodrigo
  • Collazo-Bigliardi, Sofía
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The influence of citric acid (CA) on structural and physicochemical properties of blend films based on corn starch and polycaprolactone (PCL) was studied. Films were obtained by melt blending of starch and PCL and compression molding. Phase separation of polymers observed by scanning electron microscope and atomic force microscope was reduced by CA incorporation. CA affected both starch and PCL crystallization as deduced from the X-ray diffraction patterns and values of melting enthalpy. Glass transition of starch was reduced by PCL incorporation, while this occurred to a greater extent in films containing CA. Obtained results point to enhanced interactions between PCL and starch chains in films with CA, although this only quantitatively benefits the film properties at a low PCL ratio. Compounding starch with small amounts of PCL, using glycerol and CA, can supply films with better functional properties than net starch films., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia throughout the projects AGL2010-20694 and AGL2013-42989-R. Rodrigo Ortega-Toro thanks the Conselleria de Educacio de la Comunitat Valenciana for the Santiago Grisolia grant. Authors also thank the Electron Microscopy Service of the UPV for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of liposome encapsulated essential oils on properties of chitosan films

  • Valencia-Sullca, Cristina Encarnación
  • Jiménez Serrallé, Miriam
  • Jiménez Marco, Alberto
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of the encapsulation of eugenol and cinnamon leaf essential oil (CLEO) in lecithin liposomes on the losses of these compounds during the chitosan film formation process by casting was evaluated. Film-forming dispersions and films with eugenol or CLEO (either free or encapsulated) were obtained and characterized. The content of eugenol in active films was quantified by means of solvent extraction and gas chromatograph analysis. The encapsulation of eugenol or CLEO in lecithin liposomes led to the films retaining 40% &#8722;50% of the incorporated eugenol, whereas only 1%&#8722;2% was retained when eugenol was incorporated by direct emulsification. Films with liposomes exhibited a lamellar microstructure which improved film extensibility and increased water vapour barrier capacity with respect to those with free emulsified compounds. Liposomes also modified the optical properties of the films, reducing their gloss, increasing colour saturation and making them redder in colour. The encapsulation of volatile active compounds in liposomes appears to be a good strategy for obtaining antimicrobial films with essential oils., The authors acknowledge the financial support provided by the Ministerio de Economía y Competitividad (Project AGL2013-42989-R). Cristina Valencia Sullca thanks the Programa Nacional de Becas del Perú (Pronabec) for the completion of her doctoral thesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermoplastic Starch: Improving their Barrier Properties, Almidón termoplástico: mejorando sus propiedades de barrera

  • ORTEGA-TORO, RODRIGO
  • Collazo-Bigliardi, Sofia
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] There are several strategies for improving functional properties of starch based materials. Blending with more hydrophobic compounds and bilayer formation are the most common methods. Barrier properties of several formulations obtained by different processing methods were measured. The properties of some obtained materials were compared with those usually employed in food packaging. The most promising materials were those starch PCL blends, compatibilized with grafted poly(ε-caprolactone) with polar groups and PCL-starch bilayer films, showing a parallel resistance to mass transfer of two layers with respective good barrier to water vapour and oxygen. Their barrier properties met the food packaging requirements for a wide number of food products., [ES] Existen diversas estrategias para incrementar las propiedades funcionales de materiales a base de almidón. Las mezclas con compuestos más hidrofóbicos y formación de bicapas son los métodos más comunes. Se determinaron las propiedades de barrera de diversas formulaciones obtenidas mediante diferentes métodos de procesamiento. Las propiedades de algunos materiales adquiridos fueron comparables a la de aquellos usados normalmente en empaques alimentarios. Los materiales más prometedores fueron aquellas mezclas almidón-PCL compatibilizadas con poli(ε-caprolactona) injertada con grupos polares y las materiales bicapas de almidón-PCL, que presentan dos capas paralelas con alta barrera al oxígeno y al vapor de agua, respectivamente. Las propiedades barreras de estos materiales se adecuaron a los requerimientos para empacado alimentario de un gran número de productos alimenticios., The authors acknowledge the financial support from the Spanish Ministerio de Educación y Ciencia throughout the project AGL2013-42989-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of plasticizers on thermal and physical properties of compression-moulded poly[(3-hydroxybutyrate)-co- (3-hydroxyvalerate)] films

  • Requena-Peris, Raquel
  • Jiménez Marco, Alberto
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)] (PHBV) is a promising bio-based, biodegradable polymer for replacing synthetic polymers, but its brittleness limits its application range. With the aim of improving the mechanical properties of PHBV films, different plasticizers (polyethylene glycol (PEG 200, 1000 and 4000), lauric acid (LA) and stearic acid (SA)) were incorporated into the film formulation at 10 wt%. All plasticized films showed lower melting temperature and crystallization degree than pure PHBV films. All plasticizers, except SA, reduced film stiffness and resistance to break, and increased the films¿ water sorption capacity and solubility as well as their water vapour permeability, but only PEG1000 yielded more extensible films. PEG1000 and PEG4000 gave rise to the most heat-resistant plasticized films, while LA and SA highly promoted the heat-sensitivity of PHBV. PEG1000 was the most effective at plasticizing PHBV films, and it was the only plasticizer that partially mitigated the ageing effects. However, a greater ratio of plasticizer would be required to adapt PHBV mechanical properties to some packaging requirements., The authors thank the Ministerio de Economia y Competitividad - Government of Spain for the financial support provided through AGL2013-42989-R Project. Author Raquel Requena thanks the Ministry of Education, Cultural and Sport - Government of Spain for a FPU Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Eugenol incorporation into thermoprocessed starch films using different encapsulating materials

  • Talón, Emma
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The effect of the incorporation of eugenol on the mechanical, barrier and antioxidant properties of compression moulded corn starch films was studied as well as the release kinetics. Free or spray-dried encapsulated eugenol, using whey protein or lecithin as wall materials and maltodextrin as drying coadjuvant and oleic acid (OA) as a carrying agent, was used. Thermo-processing of the films caused significant eugenol losses (80-65%), which were minimised when microcapsules contained OA. In the films with free eugenol, the compound retention was enhanced through its complexation with starch. Eugenol microcapsules provoked a heterogeneous microstructure in the film matrices, which became less resistant and stretchable, with lower water sorption capacity and improved barrier properties. Encapsulates promoted a faster eugenol release and a greater release ratio at equilibrium, especially when they contained more water-soluble components. An acid medium promoted the release ratio, associated with the progressive partial hydrolysis of the starch matrix., The authors acknowledge the financial support provided by the Spanish Ministerio de Educacion y Ciencia (Projects AGL2013-42989-R and AGL2016-76699-R). Author Emma Talon thanks the Universitat Politecnica Valencia (UPV) for a FPI Grant (99/2011). The authors also thank the services rendered by the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biodegradation behavior of starch-PVA films as affected by the incorporation of different antimicrobials

  • Cano Embuena, Amalia Isabel
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
The effect that the incorporation of different antimicrobial substances into S-PVA films had on their disintegration and biodegradation process was analysed. To this end, starch, PVA and S-PVA films containing different concentrations of neem oil, oregano essential oil and silver nanoparticles were submitted to composting conditions in order to determine the disintegration and biodegradability percentages for 73 and 45 days, respectively. Additionally, thermogravimetric and structural analyses were also carried out throughout the composting period. The biodegradation and disintegration behavior of S-PVA films was intermediate between S and PVA films. The addition of neem and oregano essential oils slightly affected the biodegradation and disintegration profile of starch-PVA films, enhancing both disintegration and biodegradation levels. So, the presence of these antimicrobials did not compromise the compostable and biodegradable character of the starch-PVA blend films. Nevertheless, the biodegradation capacity of films containing 9.8% silver species was seriously affected, reaching values of only 58% after 45 days of composting, despite their high disintegration capacity. Thus, lower silver concentrations are recommended in order to avoid possible alterations in compost microbial activity., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad through the projects AGL2013-42989-R. Amalia Cano also thanks the Spanish Ministerio de Education, Cultura y Deporte for the FPU grant (AP2010-4377).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physical properties and stability of starch-gelatin based films as affected by the addition of esters of fatty acids

  • Acosta Dávila, Sandra Cecilia
  • Jiménez Marco, Alberto
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cassava starch films containing 25 and 50 % (in the polymer blend) of bovine gelatin were obtained using glycerol (30 %) as plasticizer. Film formulations were also obtained with 15 % of lipid (blend of fatty acid-glycerol esters). Microstructural and physical (optical, barrier and mechanical) properties were analysed in order to compare blend films with neat starch or gelatin films. The incorporation of gelatin and lipids to glycerol-plasticized cassava starch films notably affected their physical properties, while they showed polymer-phase separation and a lipid-dispersed phase. Gelatine incorporation gave rise to harder films with greater resistance to break and extensibility, while the lipids decreased film hardness and resistance but enhanced the stretchability, especially in films with 50 % gelatin content. Likewise, lipids improved water barrier properties of the films, but they impaired the oxygen permeability at the same time as they decreased the film gloss and transparency. After 5 weeks of storage, all the films became harder and more resistant to break, especially those which did not contain lipids, which enhanced the films extensibility during storage. Cassava starch films with 50 % gelatine, both with and without lipids, exhibited very adequate properties for food coating or packaging., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad throughout the project AGL2013-42989-R, co-financed with FEDER founds. Sandra Acosta also thanks ESPOL (Equador) for a predoctoral grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the processing method and antimicrobial agents on properties of starch-gelatin biodegradable films

  • Moreno Marro, Olga
  • Díaz, Raúl
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Biodegradable films based on corn starch (CS), bovine gelatin (BG), glycerol as a plasticizer, and lysozyme or N--lauroyl-l-arginine ethyl ester monohydrochloride (LAE) as antimicrobial agents were obtained by both extension-drying (casting) of the aqueous dispersions and melt blending and compression moulding. Microstructural analyses revealed the lack of miscibility between CS and BG, which implied polymer phase separation, with the formation of domains rich in each polymer, with different arrangements for casting and melt blending processes. Thermoprocessed films were more permeable to water vapour (60%-115%) and oxygen (70%-355%) compared to the corresponding cast films and exhibited lower stiffness (50%-75%) and resistance to break (17%-33%) and greater extensibility (150%-190%) than casting films. LAE improved the water vapour barrier and reduced the oxygen barrier of both kinds of films, whereas the opposite effect was observed for lysozyme. Antimicrobial activity against Listeria innocua was observed for formulations containing LAE processed by both casting and compression moulding, all of which exhibited a bactericidal effect. (c) 2016 Society of Chemical Industry, The authors acknowledge the financial support provided by the Ministerio de Economía y Competividad (Projects AGL2013- 42989-R) and the services rendered by the Electron Microscopy Service of the UPV. Olga Moreno Marro also thanks the Ministerio de Educación, Cultura y Deporte, for the FPU 2012–1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of interfacial adhesion between starch and graftedpoly(epsilon-caprolactone)

  • Ortega-Toro, Rodrigo
  • Santagata, Gabriella
  • D Ayala, Giovanna Gomez
  • Cerruti, Pierfrancesco
  • Malinconico, Mario
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The use of a modified poly(Epsilon-caprolactone) (gPCL) to enhance polymer miscibility in films based on ther-moplastic starch (S) and poly(Epsilon-caprolactone) is reported. PCL was functionalized by grafting with maleicanyhdride (MA) and/or glycidyl methacrylate (GMA) by reactive blending in a batch mixer. gPCL basedmaterials were analysed in terms of their grafting degree, structural and thermal properties. Blends basedon starch and PCL (wt. ratio 80:20) with including gPCL (0, 2.5 and 5 wt.%), as a compatibilizer, wereobtained by extrusion and compression moulding, and their structural, thermal, mechanical and bar-rier properties were investigated. Blends containing gPCL evidenced better interfacial adhesion betweenstarch and PCL domains, as deduced from both structural (XRD, FTIR, SEM) and bulk properties (DSC, TGA).Moreover, grafted PCL-based compatibilizers greatly improved functional properties of S-PCL blend films,as pointed out from mechanical performance and higher barrier properties, valuable to meet the foodpackaging requirements., The authors gratefully acknowledge the project MAREA, "Materiali Avanzati per la Ricerca ed il comparto Agroalimentare"-in the frame of National Operative Program (PON 2007-2013) and Ministerio de Economia y Competitividad (Spain) throughout the project AGL2013-42989 for their research financial support. They would like to thank the laboratory of electron microscopy "LaMEST" CNR, in the person of Maria Cristina Del Barone for the kind technical assistance in performing SEM analysis. R. Rodrigo Ortega-Toro thanks the Conselleria de Educacio de la Comunitat Valenciana for the Santiago Grisolia grant (GRISOLIA 2012/001) and to Short-Term Scientific Missions (STSM) from European Cooperation in Science and Technology (COST).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of chitosan lemon essential oil coatings on volatile profile of strawberries during storage

  • Perdones Montero, Ángela
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vargas, Maria|||0000-0001-6024-0952
[EN] Chitosan coatings containing lemon essential oils were described as effective at controlling fruit fungal decay at 20 C during 7 days. In this work, GC MS was used to characterise the volatile compounds of strawberries during cold storage in order to analyse the influence of fruit coatings with chitosan, containing or not containing lemon essential oil, on the volatile profile of the fruits. The coatings affected the metabolic pathways and volatile profile of the fruits. Pure chitosan promoted the formation of esters and dimethyl furfural in very short time after coating, while coatings containing lemon essential oil incorporated terpenes (limonene, c-terpinene, p-cymene and alpha-citral) to the fruit volatiles and enhanced the fermentative process, modifying the typical fruit aroma composition. No effect of chitosan coatings was sensorially perceived, the changes induced by lemon essential oil were notably appreciated., The authors acknowledge the financial support provided by Ministerio de Economia y Competividad (AGL2013-42989-R). Angela Perdones also thanks the Universidad Politecnica de Valencia for the FPI Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermoplastic cassava starch-chitosan bilayer films containing essential oils

  • Valencia-Sullca, Cristina Encarnación
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Starch-chitosan bilayer films, containing or not essential oils in the casted chitosan layer were obtained by thermo-compression. Bilayer films exhibited a good interfacial adhesion and better mechanical resistance than starch monolayers, although they were less stretchable and less transparent. Starchchitosan films were effective at controlling the bacterial growth in pork meat, but the thermal treatment applied to obtain the bilayers reduced their antimicrobial properties as compared to chitosan monolayers. The addition of essential oils did not promote any antimicrobial action in chitosan mono and bilayer films applied to pork meat. The final amount of essential oils in the films was very limited probably due to the losses occurred during film processing method. Other strategies to incorporate the essential oils into chitosan-based films should be used to improve their final retention in the film matrix and their effective release into the coated food. (C) 2017 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support provided by the Spanish Ministerio de Economia y Competividad (Projects AGL2013-42989-R and AGL2016-76699-R). Author Cristina Valencia-Sullca thanks the Peruvian Grant National Program (PRONABEC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combination of poly(lactic) acid (PLA) and starch to obtain biodegradable materials for food packaging

  • Muller, Justine
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The massive use of synthetic plastics, in particular in the food packaging area, has a great environmental impact, and alternative more ecologic materials are being required. Poly(lactic) acid (PLA) and starch have been extensively studied as potential replacements for non-degradable petrochemical polymers on the basis of their availability, adequate food contact properties and competitive cost. Nevertheless, both polymers exhibit some drawbacks for packaging uses and need to be adapted to the food packaging requirements. Starch, in particular, is very water sensitive and its film properties are heavily dependent on the moisture content, exhibiting relatively low mechanical resistance. PLA films are very brittle and offer low resistance to oxygen permeation. Their combination as blend or multilayer films could provide properties that are more adequate for packaging purposes on the basis of their complementary characteristics. The main characteristics of PLA and starch in terms of not only the barrier and mechanical properties of their films but also of their combinations, by using blending or multilayer strategies, have been analysed, identifying components or processes that favour the polymer compatibility and the good performance of the combined materials. The properties of some blends/combinations have been discussed in comparison with those of pure polymer films., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2013-42989-R and AGL2016-76699-R. Author Justine Muller thanks the Generalitat Valènciana for the Santiago Grisolía Grant (GRISOLIA/2014/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Release kinetics and antimicrobial properties of carvacrol encapsulated in electrospun poly-(epsilon-caprolactone) nanofibres. Application in starch multilayer films

  • Tampau, Alina
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Electrospun poly-(epsilon-caprolactone) (PCL) fibre mats encapsulating Carvacrol (CA) were obtained with good encapsulation efficiency (85%) and CA load (11% in the fibre). These mats were effective at controlling the growth of Escherichia coli, when the surface density of CA loaded fibres was 1.2 or 1.8 mg/cm2, in line with the CA released into the culture medium that exceeded the MIC of the bacteria. However, they were not effective at controlling the growth of Listeria innocua, since a greater release of CA was necessary to achieve the MIC of this bacterium. It was not only the CA load in the fibres, but also its release capacity in the media that determined the antimicrobial effect. The fibre showed higher release rate and ratio in less polar simulants, D1 (50% ethanol) and D2 (isooctane) (representing fatty foodstuff), where practically the total amount of CA was released; whereas in more polar systems (simulants A (10% ethanol) and B (3% acetic acid)) a more limited CA delivery (60-75%) occurred, at a slower rate. The antimicrobial action of the active PCL mats was reproduced in multilayer starch films containing the CA-loaded electrospun PCL fibres between two starch sheets, with a slightly delayed response. In the multilayer films, a great reduction in the water vapour permeability was also observed with respect to that of starch films, without relevant changes in other functional properties of the films for packaging purposes., The authors thank the Ministerio de Economia y Competitividad (MINECO) of Spain, for the financial support for this study as a part of projects AGL2013-42989-R and AGL2016-76699-R. The author A. Tampau thanks MINECO for the pre-doctoral research grant # BES-2014-068100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Encapsulation of eugenol by spray-drying using whey protein isolate or lecithin: Release kinetics, antioxidant and antimicrobial properties

  • Talón-Argente, Emmanuelle
  • Lampi, Anna-Maija
  • Jouppila, Kirsi
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The encapsulation of eugenol (E) by spray-drying using whey protein (WP) or soy lecithin (LE) and maltodextrin in combination with oleic acid (OA) and chitosan (CH) was analysed in order to obtain antioxidant and antimicrobial powders for food applications. Formulations with only WP or LE showed higher encapsulation efficiencies (EE) (95¿98%) and antibacterial effect against E. coli and L. innocua due to their greater E load. Incorporation of OA or CH promoted lower EE, which negatively affected the antimicrobial and antioxidant activities of the powders. Furthermore, the addition of CH implied less thermal protection against the E losses. The eugenol release was not notably affected by pH or polarity of the food simulant, but the release rate significantly decreased when incorporating OA and CH. The E-LE formulations better retained the eugenol than E-WP powders when heated above 200¿°C, this being relevant for the powder inclusion in thermally treated products., The authors acknowledge the financial support provided by the Spanish Ministerio de Educacion y Ciencia (Projects AGL2013-42989-R and AGL2016-76699-R). Author Emma Talon thanks the Universitat Politecnica Valencia (UPV) for a FPI Grant (99/2011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Use of tannins to enhance the functional properties of protein based films.

  • Cano, A.
  • Andrés, M.
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] In this study, three tannins from different sources have been used (from white peel grape (W), red peel grape (R) and from oak bark (O)) to obtain active films based on proteins (caseinate and gelatin) on the basis of their natural origin and potential antioxidant and antimicrobial activity. Films were obtained in two different ways: monolayer films, by homogeneously blending the tannins with the proteins and bilayer films, by coating the previously obtained protein film with the different tannin solutions. The microstructural, physicochemical characterisation as well as the antioxidant and antimicrobial activities of the films were analysed. The interactions developed between tannins and protein matrices determined the physico-chemical properties of the films. Significant changes were only observed in tannin-caseinate films, due to the establishment of hydrogen bonding and hydrophobic interactions, especially when using the tannin with the greatest phenolic content (W). Thus, the W tannin caseinate based films turned thicker, with markedly improved (p < 0.05) water solubility and WVP values and became mechanically stiffer and less stretchable. All of the films incorporating tannins exhibited remarkable antioxidant and antimicrobial activities against E.Coli and L. innocua, being the bilayer films containing W tannin the ones exhibiting the best antioxidant and antimicrobial activity against both bacteria (5 log of reduction), due to the greater availability of the active component when incorporated as a bilayer., The authors acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad through the project AGL2016-76699-R.