RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication
Artículo científico (JournalArticle)
Refined Three-Dimensional Strut-and-Tie Model for Analysis and Design of Four-Pile Caps
[EN] Pile caps used in foundations are commonly designed for simple cases of loading and geometry using the strut-and-tie method. This approach is known to provide safe designs and rather conservative predictions of the ultimate failure load of tests. This level of conservatism is due mainly to the large simplifications made in the geometry assumed, which in many cases ignore relevant parameters such as the size of the column. A three-dimensional (3-D) strut-and-tie model is presented for four-pile caps in which the geometry adopted is optimized. The inclination of the direct strut from the column to the pile is obtained analytically through the maximization process of the resisting load carried by the truss assuming different modes of failure (flexural and shear). This approach is shown to provide more accurate predictions of the strength of existing deep pile cap tests with lower scatter compared to design approaches in the literature and the ACI 318 Code., The authors wish to thank the Spanish Ministry of Education for the FPU fellowship FPU12-01459 received by the first author and the funding provided for his research stay at the University of Surrey. The authors also wish to thank the Spanish Ministry of Economy and Competitiveness for funding Project BIA 2012-32300.