Skip to main content

MODELIZACION DEL PROCESO DE TALADRADO DE MATERIALES COMPUESTOS DE FIBRA DE CARBONO

BES-2012-055162

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Formación de Personal Investigador
Subprogram Subprograma de Ayudas de Formación de Personal Investigador
Call Contratos Predoctorales
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD CARLOS III DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs

  • Feito Sánchez, Norberto
  • Díaz Álvarez, José
  • López Puente, Jorge
  • Miguélez Garrido, María Henar
CFRPs drilling is a common process in the aerospace industry carried out prior to components assembly. Machining induced damage leads to significant percentage of component rejection. Damage extension strongly depends on drilling geometry and cutting parameters. Fresh drill geometry changes with cutting time due to the wear progression and the risk for hole quality is enhanced as cutting progresses. The influence of wear on hole quality has been analyzed in the literature using mainly an experimental approach. Simulation of drilling process is an effective method that can be used to optimize drill geometry and process parameters in order to control hole quality and analyze the drill wear evolution. In this paper a finite element model for drilling woven CFRPs, reproducing both fresh and worn tools, is presented. Two different point angles considering fresh and honned edge were modeled. A progressive intra-laminar failure model based on the Chang and Chang model is considered. Cohesive elements allowed the analysis of inter-laminar damage (delamination). The model demonstrated its ability to predict thrust force and delamination for different values of feed rate and cutting speed. Model predictions show the influence of tool geometry (including variations induced due to wear) on delamination., This study has been developed under the financial support of the Ministry of Economy and Competitiveness of Spain under the projects DPI2011-25999 and DPI2013-41094-R, and the FPI subprogram associated to the project DPI2011-25999 with the reference BES-2012-055162.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical Modelling of Ballistic Impact Response at Low Velocity in Aramid Fabrics

  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Loya, J.A.
  • Muñoz-Sánchez, A.
  • Das, R.
[EN] In this study, the effect of the impact angle of a projectile during low-velocity impact on Kevlar fabrics has been investigated using a simplified numerical model. The implementation of mesoscale models is complex and usually involves long computation time, in contrast to the practical industry needs to obtain accurate results rapidly. In addition, when the simulation includes more than one layer of composite ply, the computational time increases even in the case of hybrid models. With the goal of providing useful and rapid prediction tools to the industry, a simplified model has been developed in this work. The model offers an advantage in the reduced computational time compared to a full 3D model (around a 90% faster). The proposed model has been validated against equivalent experimental and numerical results reported in the literature with acceptable deviations and accuracies for design requirements. The proposed numerical model allows the study of the influence of the geometry on the impact response of the composite. Finally, after a parametric study related to the number of layers and angle of impact, using a response surface methodology, a mechanistic model and a surface diagram have been presented in order to help with the calculation of the ballistic limit., This research was funded by the Ministry of Economy and Competitiveness from Spain, grant number BES-2012-055162 and the international collaborations subprogram under the reference EEBB-I-2016-11586.