Skip to main content

MODELIZACION DEL PROCESO DE TALADRADO DE MATERIALES COMPUESTOS DE FIBRA DE CARBONO

DPI2011-25999

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD CARLOS III DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs

  • Feito Sánchez, Norberto
  • Díaz Álvarez, José
  • López Puente, Jorge
  • Miguélez Garrido, María Henar
CFRPs drilling is a common process in the aerospace industry carried out prior to components assembly. Machining induced damage leads to significant percentage of component rejection. Damage extension strongly depends on drilling geometry and cutting parameters. Fresh drill geometry changes with cutting time due to the wear progression and the risk for hole quality is enhanced as cutting progresses. The influence of wear on hole quality has been analyzed in the literature using mainly an experimental approach. Simulation of drilling process is an effective method that can be used to optimize drill geometry and process parameters in order to control hole quality and analyze the drill wear evolution. In this paper a finite element model for drilling woven CFRPs, reproducing both fresh and worn tools, is presented. Two different point angles considering fresh and honned edge were modeled. A progressive intra-laminar failure model based on the Chang and Chang model is considered. Cohesive elements allowed the analysis of inter-laminar damage (delamination). The model demonstrated its ability to predict thrust force and delamination for different values of feed rate and cutting speed. Model predictions show the influence of tool geometry (including variations induced due to wear) on delamination., This study has been developed under the financial support of the Ministry of Economy and Competitiveness of Spain under the projects DPI2011-25999 and DPI2013-41094-R, and the FPI subprogram associated to the project DPI2011-25999 with the reference BES-2012-055162.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling of impact dynamics and application in public security education

  • Rodríguez-Millán, Marcos
  • Marco, Miguel
  • Loya, José Antonio
  • Moure, Fernando
  • Miguélez, María Henar
[EN] This work presents a methodology for interfacing with the students in order to study impact problems. The results are derived from the Bachelor Thesis developed at the end of the fourth course in the Security Engineering Degree. The knowledge regarding security topic and the use of new analysis tools (commercial finite element solver) have proved to be extremely useful for future Guardia Civil officers., The authors acknowledge the financial support for the work to the Ministry of Economy and Competitiveness of Spain under the Project DPI2011-25999.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A review on recent advances in numerical modelling of bone cutting

  • Marco, Miguel
  • Rodríguez Millán, Marcos
  • Santiuste, Carlos
  • Henar Miguélez, María
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] Common practice of surgical treatments in orthopaedics and traumatology involves cutting processes of bone. These operations introduce risk of thermo-mechanical damage, since the threshold of critical temperature producing thermal osteonecrosis is very low. Therefore, it is important to develop predictive tools capable of simulating accurately the increase of temperature during bone cutting, being the modelling of these processes still a challenge. In addition, the prediction of cutting forces and mechanical damage is also important during machining operations. As the accuracy of simulations depends greatly on the proper choice of the thermo-mechanical properties, an essential part of the numerical model is the constitutive behaviour of the bone tissue, which is considered in different ways in the literature. This paper focuses on the review of the main contributions in modelling of bone cutting with special attention to the bone mechanical behaviour. The aim is to give the reader a complete vision of the approaches commonly presented in the literature in order to help in the development of accurate models for bone cutting., The authors acknowledge to the Ministry of Economy and Competitiveness of Spain the financial support for this work received through the projects DPI2011-25999 and DPI2013-46641-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The influence of anisotropy in numerical modelling of orthogonal cutting of cortical bone

  • Santiuste, C.
  • Rodríguez Millán, M.
  • Miguélez, H.
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
Cutting operations in bone are involved in surgical treatments in orthopaedics and traumatology. The importance of guaranteeing the absence of damage in the living workpiece is equivalent in this case to ensuring surface quality. The knowledge in this field is really far from the expertise in industrial cutting of mechanical components. Modeling of bone cutting is a challenge strongly dependent on the accurate modeling of mechanical behaviour of the bone. This paper focuses on modeling of orthogonal cutting of cortical bone. The intrinsic anisotropic nature of the cortical bone that makes it comparable to a composite material is taken into account. The influence of anisotropy is analysed comparing this behaviour with an isotropic approach. It is shown that both chip morphology and temperature are affected by the anisotropy of the cortical bone that acts as a workpiece., The authors acknowledge the financial support for the work to the Ministry of Economy and Competitiveness of Spain under the Project DPI2011-25999 and DPI2013-46643-R.