Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Estimation of the melting threshold of Ti supersaturated Si using time resolved reflectometry and haze measurements

  • Montero Álvarez, Daniel
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • García Hernansanz, Rodrigo
  • Suler, Andrej
  • Acosta Alba, Pablo
  • Kerdiles, Sébastien
  • Pastor Pastor, David
  • García Hemme, Eric
  • Roy, Francois
  • Olea Ariza, Javier
Hyperdoped or supersaturated semiconductors are gathering the attention of industry and research institutions due to their sub-bandgap photon absorption properties. In this study, two fast and non-invasive techniques, time-resolved reflectometry (TRR) and Haze Measurements, are applied to infer the melt and solidification regimes of Ti supersaturated 300 mm silicon wafers, aiming to ease the characterization process towards high volume manufacturing of supersaturated materials. Ti supersaturation is attained by using an ion implantation process with a dose 3 x 10(15) cm(-2), which amorphizes the surface. Crystalline quality is then recovered by means of a XeCl UV nanosecond laser annealing process. TRR technique is used to determine two different melting and solidification processes of the laser annealed implanted surface. A first brief, low temperature peak (alpha peak) is associated with the melting process of the amorphized surface, followed by a longer peak/plateau (beta (1) peak/plateau), linked to the melting process of the crystalline phase below the amorphized layer, at sufficiently high laser fluences. Haze technique is used to indirectly measure the crystalline quality after the solidification process of the laser-annealed surface. Atomic force microscopy measurements are used to obtain the surface roughness value and cross-section high resolution transmission electron microscopy micrographs to check crystalline quality.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strong subbandgap photoconductivity in GaP implanted with Ti

  • Olea, Javier
  • Prado, Álvaro del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Montero, D.
  • González-Díaz, Germán
  • Gonzalo de los Reyes, J.
  • López, E.
  • Siegel, Jan
  • López, Esther
9 pags., 6 figs., 1 tab., Photovoltaic solar cells based on the intermediate band (IB) concept could greatly enhance the efficiency of future devices. We have analyzed the electrical and photoconductivity properties of GaP supersaturated with Ti to assess its suitability for IB solar cells. GaP:Ti was obtained by ion implantation followed by pulsed-laser melting (PLM) using an ArF excimer laser. It was found that PLM energy densities between 0.35 and 0.55 J/cm produced a good recovery of the crystalline structure of GaP (both unimplanted and implanted with Ti), as evidenced by high mobility measured values (close to the reference GaP). Outside this energy density window, the PLM failed to recover the crystalline structure producing a low mobility layer that is electrically isolated from the substrate. Spectral photoconductivity measurements were performed by using the van der Pauw set up. For GaP:Ti a significant enhancement of the conductivity was observed when illuminating the sample with photon energies below 2.26 eV, suggesting that this photoconductivity is related to the presence of Ti in a concentration high enough to form an IB within the GaP bandgap. The position of the IB was estimated to be around 1.1 eV from the conduction band or the valence band of GaP, which would lead to maximum theoretical efficiencies of 25% to 35% for a selective absorption coefficients scenario and higher for an overlapping scenario., This work was partially supported by Project MADRID‐PV (grant no. P2013/MAE‐2780) funded by the Comunidad de Madrid, by the Spanish MINECO (Ministerio de Economía y Competitividad) under grants TEC 2013‐41730‐R and TEC 2015‐ 69916‐C2‐1‐R, and by the Universidad Complutense de Madrid (Programa de Financiación de Grupos de Investigación UCM–Banco Santander) under grant 910173‐2014. The work of D. Montero was supported by the Spanish MINECO under contract BES‐2014‐ 067585., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the properties of GaP supersaturated with Ti

  • Olea, J.
  • Algaidy, S.
  • Prado, A. del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Montero, D.
  • Caudevilla, D.
  • González-Díaz, G.
  • Soria, Esther
  • Gonzalo de los Reyes, J.
8 pags., 7 figs., 2 tabs., We have fabricated GaP supersaturated with Ti by means of ion implantation and pulsed-laser melting to obtain an intermediate band material with applications in photovoltaics. This material has a strong sheet photoconductance at energies below the bandgap of GaP and it seems to be passivated by a Ga defective GaPO oxide layer during the laser process. Passivation is consistently analyzed by sheet photoconductance and photoluminescence measurements. We report on the structural quality of the resulting layers and analyze the energy of the new optical transitions measured on GaP:Ti. A collapse found in the sheet photoconductance spectra of GaP:Ti samples fabricated on undoped substrates is explained by the negative photoconductivity phenomenon., Authors would like to acknowledge the C.A.I. de Tecnicas Físicas of the Universidad Complutense de Madrid for ion implantation and evaporation processes. Also, the Institute for Optoelectronics Systems and Microtechnology of the Universidad Politecnica de Madrid for photoluminescence experiments. The fabrication of TEM samples were conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon (LMA-INA) ofthe Universidad de Zaragoza. Authors acknowledge the LMA-INAfor offering access to their instruments and expertise, and the Centro Nacional de Microelectronica at the Moncloa Campus for theTEM and XEDS measurements.This work was partially supported by the Spanish Ministry of Science, Innovation and Universities/FEDER under grants TEC2017-84378-R and RTI 2018-096498-B-I00. The work of D. Montero wasbsupported by the Spanish MINECO under contract BES-2014-067585. This work is part of the project MADRID-PV2 P-2018/EMT-4308 funded by the Regional Government of Madrid with thesupport from FEDER funds