Skip to main content

FOTODETECTORES PARA INFRARROJO CERCANO Y MEDIO BASADOS EN SEMICONDUCTORES HIPERDOPADOS COMPATIBLES CON TECNOLOGIA CMOS

TEC2017-84378-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Ti supersaturated Si by microwave annealing processes

  • Olea Ariza, Javier
  • González Díaz, Germán
  • Pastor Pastor, David
  • García Hemme, Eric
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • García Hernansanz, Rodrigo
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
  • Lee, Yao-Jen
  • Hong, Tzu-Chieh
  • Chao, Tien-Sheng
Microwave annealing (MWA) processes were used for the first time to obtain Ti supersaturated Si. High Ti doses were ion implanted on Si substrates and subsequently MWA processed to recrystallize the amorphous layer. The resulting layers were monocrystalline with a high density of defects. Ti depth profiles indicate that diffusion is avoided once recrystallization is produced. Finally, the electronic transport properties measurements point to a decoupling effect between the Si:Ti layer and the substrate. The implanted layer present also a shallow donor and very high Hall mobility.
Docta Complutense
Publication Artículo científico (JournalArticle)

Estimation of the melting threshold of Ti supersaturated Si using time resolved reflectometry and haze measurements

  • Montero Álvarez, Daniel
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • García Hernansanz, Rodrigo
  • Suler, Andrej
  • Acosta Alba, Pablo
  • Kerdiles, Sébastien
  • Pastor Pastor, David
  • García Hemme, Eric
  • Roy, Francois
  • Olea Ariza, Javier
Hyperdoped or supersaturated semiconductors are gathering the attention of industry and research institutions due to their sub-bandgap photon absorption properties. In this study, two fast and non-invasive techniques, time-resolved reflectometry (TRR) and Haze Measurements, are applied to infer the melt and solidification regimes of Ti supersaturated 300 mm silicon wafers, aiming to ease the characterization process towards high volume manufacturing of supersaturated materials. Ti supersaturation is attained by using an ion implantation process with a dose 3 x 10(15) cm(-2), which amorphizes the surface. Crystalline quality is then recovered by means of a XeCl UV nanosecond laser annealing process. TRR technique is used to determine two different melting and solidification processes of the laser annealed implanted surface. A first brief, low temperature peak (alpha peak) is associated with the melting process of the amorphized surface, followed by a longer peak/plateau (beta (1) peak/plateau), linked to the melting process of the crystalline phase below the amorphized layer, at sufficiently high laser fluences. Haze technique is used to indirectly measure the crystalline quality after the solidification process of the laser-annealed surface. Atomic force microscopy measurements are used to obtain the surface roughness value and cross-section high resolution transmission electron microscopy micrographs to check crystalline quality.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the properties of GaP supersaturated with Ti

  • Olea, J.
  • Algaidy, S.
  • Prado, A. del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Montero, D.
  • Caudevilla, D.
  • González-Díaz, G.
  • Soria, Esther
  • Gonzalo de los Reyes, J.
8 pags., 7 figs., 2 tabs., We have fabricated GaP supersaturated with Ti by means of ion implantation and pulsed-laser melting to obtain an intermediate band material with applications in photovoltaics. This material has a strong sheet photoconductance at energies below the bandgap of GaP and it seems to be passivated by a Ga defective GaPO oxide layer during the laser process. Passivation is consistently analyzed by sheet photoconductance and photoluminescence measurements. We report on the structural quality of the resulting layers and analyze the energy of the new optical transitions measured on GaP:Ti. A collapse found in the sheet photoconductance spectra of GaP:Ti samples fabricated on undoped substrates is explained by the negative photoconductivity phenomenon., Authors would like to acknowledge the C.A.I. de Tecnicas Físicas of the Universidad Complutense de Madrid for ion implantation and evaporation processes. Also, the Institute for Optoelectronics Systems and Microtechnology of the Universidad Politecnica de Madrid for photoluminescence experiments. The fabrication of TEM samples were conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon (LMA-INA) ofthe Universidad de Zaragoza. Authors acknowledge the LMA-INAfor offering access to their instruments and expertise, and the Centro Nacional de Microelectronica at the Moncloa Campus for theTEM and XEDS measurements.This work was partially supported by the Spanish Ministry of Science, Innovation and Universities/FEDER under grants TEC2017-84378-R and RTI 2018-096498-B-I00. The work of D. Montero wasbsupported by the Spanish MINECO under contract BES-2014-067585. This work is part of the project MADRID-PV2 P-2018/EMT-4308 funded by the Regional Government of Madrid with thesupport from FEDER funds
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optoelectronic properties of GaP:Ti photovoltaic devices

  • Olea, J.
  • Gonzalo de los Reyes, J.
  • Siegel, Jan
  • Braña, A. F.
  • Godoy-Pérez, G.
  • Benítez-Fernández, R.
  • Caudevilla, D.
  • Algaidy, S.
  • Pérez-Zenteno, F.
  • Duarte-Cano, S.
  • Prado, A. del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Pastor, D.
  • San-Andrés, E.
  • Mártil, I.
6 pages, 6 figures, 1 table, Supersaturated GaP is of interest for the photovoltaic field since optical transitions at energies below the bandgap (2.26 eV) could enhance the overall device efficiency up to theoretically 60%. We have previously demonstrated that Ti supersaturated GaP can be obtained by means of ion implantation and pulsed-laser melting with high structural quality and measured its below-bandgap photoconductivity. In this work we report the first results of a GaP:Ti based photovoltaic device. We have fabricated and measured photovoltaic devices with a GaP:Ti absorber layer showing enhanced external quantum efficiency at wavelengths above 550 nm. Also, we have measured the absorption coefficient (around 104 cm−1) and refractive index of this absorber layer. Finally, current-voltage curves in darkness were measured and analyzed using a two-diodes model, showing improvable characteristics. Ideas to enhance the properties of the devices are suggested., Authors would like to acknowledge the “CAI de Tecnicas Físicas” of the Universidad Complutense de Madrid for the fabrication processes and “Laboratorio de Caracterizaci´ on de Superficies” of CENIM for XPS measurements. This work was partially supported by the Project MADRID-PV2 (P2018/EMT-4308) funded by the Regional Government of Madrid with the support from FEDER Funds, by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants TEC2017-84378-R, PID2020-116508RB-I00 and PID2020-117498RB-I00. The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B–C21/C22) funded by the Recovery and Resilience Facility of the EU and ALPHOMENA (PID2021-123190OB-I00) funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF). D. Caudevilla would also acknowledge the grant PRE2018-083798, financed by MICINN and European Social Fund. F. Perez-Zenteno is also thankful for financial collaboration from the Mexican grants program CONACyT and for predoctoral contract from UCM (call CT58/21-CT59/ 21). The authors would also like to acknowledge financial support from Ministry of Education in the Kingdom of Saudi Arabia. G. Godoy-Perez and R. Benítez-Fernandez acknowledges the research contracts under the Investigo Program (CT19/23-INVM-35 and CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social. A. F. Bra˜ na gratefully acknowledges the financial support from rom Grant No. TED2021- 129624B–C43 funded by the Spanish International Research Agency MCIN/AEI/10.13039/501100011033 and by “NextGenerationEU”/ PRTR., Peer reviewed
Docta Complutense
Publication Artículo científico (JournalArticle)

Inversion charge study in TMO hole-selective contact based solar cells

  • García Hernansanz, Rodrigo
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • García Hemme, Eric
  • Olea Ariza, Javier
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
  • Ros, Eloy
  • Puigdollers, Joaquim
  • Ortega, Pablo
  • Voz, Cristobal
In this article, we study the effect of the inversion charge ( Q _inv ) in a solar cell based on the hole-selective characteristic of substoichiometric molybdenum oxide (MoO_x ) and vanadium oxide (VO_x ) deposited directly on n-type silicon. We measure the capacitance–voltage ( C – V ) curves of the solar cells at different frequencies and explain the results taking into account the variation of the space charge and the existence of Q_inv in the c-Si inverted region. The high-frequency capacitance measurements follow the Schottky metal–semiconductor theory, pointing to a low inversion charge influence in these measurements. However, for frequencies lower than 20 kHz, an increase in the capacitance is observed, which we relate to the contribution of the inversion charge. In addition, applying the metal–semiconductor theory to the high-frequency measurements, we have obtained the built-in voltage potential and show new evidence about the nature of the conduction process in this structure. This article provides a better understanding of the transition metal oxide/n-type crystalline silicon heterocontact.
Docta Complutense
Publication Artículo científico (JournalArticle)

Electronic transport properties of Ti-supersaturated Si processed by rapid thermal annealing or pulsed-laser melting

  • Olea Ariza, Javier
  • González Díaz, Germán
  • Pastor Pastor, David
  • García Hemme, Eric
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • García Hernansanz, Rodrigo
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
In the scope of supersaturated semiconductors for infrared detectors, we implanted Si samples with Ti at high doses and processed them by rapid thermal annealing (RTA) to recover the crystal quality. Also, for comparative purposes, some samples were processed by pulsed-laser melting. We measured the electronic transport properties at variable temperatures and analyzed the results. The results indicate that, for RTA samples, surface layers with a high Ti concentration have negligible conductivity due to defects. In contrast, the implantation tail region has measurable conductivity due to very high electron mobility. This region shows the activation of a very shallow donor and a deep donor level. While deep levels have been previously reported for Ti in Si, such a shallow level has never been measured, and we suggest that it originates from Ti-Si complexes. Finally, a decoupling effect between the implanted layer and the substrate seems to be present, and a bilayer model is applied to fit the measured properties. The fitted parameters follow the Meyer–Neldel rule. The role of the implantation tails in Si supersaturated with Ti is revealed in this work.