Skip to main content

DEVELOPMENT OF MULTISITE SOLIDS AND MULTISITE ORGANIC-INORGANIC STRUCTURED HYBRID CATALYSTS

BES-2017-080329

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Contratos Predoctorales
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evolution of the optimal catalytic systems for the oxidative dehydrogenation of ethane: The role of adsorption in the catalytic performance

  • De Arriba-Mateos, Agustín
  • Solsona, Benjamin
  • Dejoz, Ana M.
  • Homs, Narcís
  • Ramírez de la Piscina, Pilar
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Three samples that correspond to the evolution of optimal catalytic systems for the oxidative dehydrogenation of ethane have been synthesized and compared in terms of catalytic behavior and adsorption properties: (i) vanadium oxide supported on alumina, (ii) Sn-promoted NiO, and (iii) multicomponent MoVTeNbO with the M1 structure. The main difference in catalytic performance lies in the extent of the overoxidation of the ethylene formed, following the order VOx/Al2O3 > NiSnOx > MoVTeNb-M1. Accordingly, the selectivity to ethylene at medium and high ethane conversion follows the order MoVTeNb-M1 > NiSnOx > VOx/Al2O3. These results are confirmed by the relative reaction rates observed for the oxidation of ethane and the oxidation of ethylene. Microcalorimetry studies indicate that the heat of adsorption of both ethane and ethylene is the highest in the most selective MoVTeNb-M1 sample. Thus, the low olefin decomposition in the MoVTeNb-M1 catalyst is not due to weaker adsorption of ethylene but to the reduced ability of its active sites to activate ethylene. The same conclusion regarding the MoVTeNb-M1 catalyst can be drawn by FT-IR of adsorbed ethylene. On the other hand, NiSnOx active sites present a high overoxidation ability, as demonstrated by the notorious formation of oxygenated species, precursors of COx. However, the ethylene decomposition is rather mild because of the existence of many free Lewis sites not involved in the overoxidation reaction. In contrast, in the case of the VOx/Al2O3 catalyst, almost all active sites are involved in the oxidation path, so that the olefins decompose readily., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding (RTl2018-099668B-C21, MAT2017-84118-C2-1-R and MAT2017-87500-P) and FEDER. The authors from ITQ also thank Programa Severo Ochoa (SEV-2016-0683). A.A. acknowledges the Severo Ochoa Excellence Program for his grant (BES-2017-080329).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The nickel-support interaction as determining factor of the selectivity to ethylene in the oxidative dehydrogenation of ethane over nickel oxide/alumina catalysts

  • Abdelbaki, Yousra
  • De Arriba-Mateos, Agustín
  • Solsona Espriu, Benjamin Eduardo
  • Delgado Muñoz, Daniel
  • Garcia-Gonzalez, Ester
  • Issaadi, Rachid
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Nickel oxides supported on gamma-alumina (Ni-loading from 5 to 30 wt% NiO) have been synthesized and tested in the oxidative dehydrogenation (ODH) of ethane in order to determine the importance of the NiO-support interaction. The best performance was achieved by the catalyst with 15 wt% NiO; higher NiO-loadings lead to the formation of unselective bulk-like NiO and lower Ni-loadings present high proportion of free alumina surface sites. The presence of oxalic acid and/or niobium in the synthesis gel resulted in the formation of NiO particles with similar size, but higher crystallinity and reducibility than the standard 15 wt% NiO catalyst. The obtained results have revealed that, in addition to NiO crystal size, the nickel oxide-support interaction determines the catalytic performance of these catalysts., Authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain through projects CRTl2018-099668-B-C21, MAT2017-84118-C2-1-R and PID2019-106662RB-C44 and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowl-edges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) . EGG acknowledges Dr. E. Urones for the valuable assistance in the use of electron microscopy facilities as well as to the CNME (Spain) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of promoters on the catalytic performance of MxV2O5 bronzes for the selective partial oxidation of H2S

  • Ruiz-Rodríguez, Lidia
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • Rodríguez-Castellón, Enrique
[EN] Metal-containing vanadium oxide bronzes (MxV2O5; M= Cu, Ag and Ca) have been prepared, characterized (before and after reaction) by various physicochemical techniques, and tested in the partial oxidation of H2S. The catalysts were prepared hydrothermally at 175 ¿C (from gels containing M/V molar ratios of 0.17 or 0.33) and heat-treated at 500 ¿C/2 h in N2. The most effective catalysts, showing a sulfur selectivity greater than 95 % for a H2S conversion beyond 90 %, were those presenting vanadium oxide bronze (ß-Cu0.261V2O5 or Ag0.333V2O5) as the main crystalline phase. Cu- and Ag-containing vanadium oxide bronzes were stable under reaction conditions. For calcium containing materials (mainly presenting the Ca0.17V2O5 bronze phase), the formation of CaSO4 has been observed during the reaction, which resulted in a negative effect on both activity and selectivity. The nature of active and selective sites in this type of catalysts, as well as the role of promoters, are also discussed., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (TED2021-130756B-C31, TED2021-130756B-C32 and MAT2017-84118-C2-1-R projects) . Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) and Dr. Ferran Sabate from ITQ for his assistance with the EPR data treatment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of the performance of bulk NiO catalyst in the oxidative dehydrogenation of ethane by tuning the synthesis parameters

  • Abdelbaki, Yousra
  • De Arriba-Mateos, Agustín
  • Issaadi, Rachid
  • Sánchez Tovar, Rita
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Highly stable and selective bulk NiO catalysts have been synthesized for the oxidative dehydrogenation (ODH) of ethane to ethylene. Interestingly, by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature, undoped NiO catalysts have shown a consistent selectivity to ethylene of ca. 75%. The optimal catalyst requires the presence of a certain amount of oxalic acid in the synthesis gel and a final calcination at low temperatures (i.e. 350 ¿C). These catalysts have been deeply characterized by means of XRD, TPR, HRTEM, Raman and UV¿vis diffuse reflectance spectroscopies, XPS and Electrochemical Impedance Spectroscopy measurements and tested in the ethane ODH. A novel electrochemical study has been undertaken, showing the p-character of all the NiO catalysts synthesized but differing in their capacitance values and density of cationic vacancies. The catalytic performance of NiO catalysts has been explained in terms of the different physicochemical properties (including changes in the number of vacancies) of the samples and the isolation of electrophilic oxygen species., Authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain through projects CRTl2018099668-B-C21 and MAT2017-84118-C2-1-R. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). Y.A. and R.I. thank the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Te-doped MoV-Oxide (M1 phase) for ethane ODH. The role of tellurium on morphology, thermal stability and catalytic behaviour

  • De Arriba-Mateos, Agustín
  • Solsona, Benjamin
  • Garcia-Gonzalez, Ester
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Undoped and Te-doped MoV-Oxide (M1 phase) catalysts have been prepared hydrothermally (Te/Mo ratio in the synthesis gel from 0 to 0.17; and heat-treated at 400 or 600ºC in N2 atmosphere), characterized by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The morphology and microporosity of the catalysts, the nature of V-species on the catalyst surface and the catalytic performance strongly depend on the composition and the heat-treatment temperature. When calcined at 400ºC, the selectivity to ethylene decreases when the amount of tellurium increases, whereas when heat treated at 600ºC, the selectivity to ethylene increases when the Te-loading increases. These trends have been explained on the basis of the good correlation between selectivity to ethylene and the concentration of V4+ species on the surface of catalysts, in which the most selective catalyst is that prepared with a Te/Mo ratio of 0.17 and heat-treated at 600ºC., The authors would like to thank the Spanish Ministry of Economy and Competitiveness for funding the projects (MINECO/FEDER) : CRTl2018-099668-B-C21, PID2019-106662RBC44, MAT2017-84118- C2-1-R and SEV-2016-0683. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) . Authors would also like to acknowledge the "A -Team" of the ITQ (Dr. Miguel Palomino, Dr. Susana Valencia and Prof. Fernando Rey) for their assistance in the performance of the adsorption experiments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Predicting the catalytic performance of Nb-doped nickel oxide catalysts for the oxidative dehydrogenation of ethane by knowing their electrochemical properties

  • Abdelbaki, Yousra
  • Sánchez-Tovar, Rita
  • de Arriba, Agustín
  • García-González, Ester
  • Fernández-Domene, Ramón M.
  • Solsona, Benjamín
  • López Nieto, José Manuel
In the present article, a relationship between the catalytic performance in the oxidative dehydrogenation of ethane (ODHE) for Nb-doped NiO catalysts and their electrochemical properties has been proposed. To do so, highly stable and selective Nb-doped NiO catalysts for the ODHE to ethylene have been synthesized by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature. These catalysts have been characterized by means of XRD, HRTEM, Raman and UV–vis diffuse reflectance spectroscopies, TPR and XPS. Moreover, Electrochemical Impedance Spectroscopy (EIS), capacitance measurements (Mott-Schottky analysis) and cyclic voltammetries studies were also carried out. Electrochemical characterization indicates changes in the type of semiconductivity: p-type for samples calcined at 350 °C and the sample prepared in the absence of oxalic acid and calcined at 500 °C, to n-type for samples prepared in the presence of oxalic acid in the synthesis gel and calcined at 500 °C. According to the obtained results, the most selective catalysts present a low Nb-incorporation on the NiO lattice with a large amount of tiny NbO nanoparticles covering NiO crystallites. This work presents, for the first time, a complete electrochemical characterization of Nb-doped NiO catalysts showing a correlation between electrochemical properties and catalytic performance., The authors would like to thank the the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: TED2021-129555B-I00, PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and MFA/2022/016). Y.A. thanks the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the selectivity to ethylene during ethane ODH over M1-based catalysts. A surface and electrochemical study

  • de Arriba, Agustín
  • Sánchez, Ginebra
  • Sánchez-Tovar, Rita
  • Concepción, Patricia
  • Fernández-Domene, Ramón
  • Solsona, Benjamín
  • López Nieto, José Manuel
MoVO, MoVTeO and MoVTeNbO mixed oxides, prepared hydrothermally and heat-treated in N at 400, 500 or 600 °C, are active and selective catalysts in the oxidative dehydrogenation (ODH) of ethane, although their catalytic behaviour strongly depends on the composition and the activation temperature of the material. Thus, the selectivity to ethylene over samples heat-treated at 400 or 600 °C, decreases according to the following trend: MoVTeNb-600 > MoV-400 > MoVTe-600 > MoVTe-400 > MoVTeNb-400 >> MoV-600 (with catalysts heat-treated at 500 °C presenting an intermediate performance). This catalytic performance can be explained to a high extent by the presence of the M1 phase in the best catalysts. Interestingly, the temperature of formation and decomposition of the M1 phase strongly depends on the chemical composition of the catalysts, leading to different trends depending on the heat-treatment temperature. Not only the presence of the M1 phase determines the catalytic performance but also the V/V ratio in the surface of catalysts. Additionally, a comprehensive brand-new electrochemical characterization of the catalysts has been carried out for MoV-based samples with M1 phase. Accordingly, the best catalytic behaviour in terms of selectivity to ethylene in the ethane ODH was observed in those materials presenting higher charge-transfer resistances at the interfacial active parts and n-type semiconductivity with few O-vacancies. Besides, lower current densities obtained in cyclic voltammetries (related to low electrochemical activity) has been associated with higher selectivity in the ODH reaction., The funding received from the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00), for this study is acknowledged. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329)., Peer reviewed