Skip to main content

MATERIALES CON ALTAS PRESTACIONES PARA BATERIAS MAS SEGURAS, Y PILAS DE COMBUSTIBLES DE OXIDO SOLIDO SIMETRICAS MAS ECONOMICAS: DESARROLLO DE MATERIALES Y PROTOTIPOS

PID2019-106662RB-C44

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Chirp-dependent dual light emission in Na_(0.95)Er_(0.05)Nb_(0.9)Ti_(0.1)O_(3) perovskite

  • Pérez Benito, Óscar
  • Antón Revilla, Miguel Ángel
  • Urones Garrote, Esteban
  • García Martín, Susana
  • García González, Esther
  • Weigand Talavera, Rosa María
Polar Na_(0.95)Er_(0.05)Nb_(0.9)Ti_(0.1)O_(3) perovskite has been synthesized as a nanostructured material by microwave assisted hydrothermal method. The characterization indicates that erbium is a constituent of the crystal structure and is preferentially located in sodium positions. The compound combines the nonlinear optical properties of the host (NaNb_(0.9)Ti_(0.1)O_(2.95) and the fluorescent properties of the Er^(3+)-dopant. Under excitation by a single femtosecond (< 10 fs) laser in the near-infrared region, simultaneous dual emission signals of second harmonic generation (SHG) and up-converting fluorescence (UCF) are observed and the nonlinear dependencies of the SHG and UCF intensities on the excitation intensity are measured. In addition, both emissions are shown to be sensitive to the chirp of the exciting pulses, and for UCF, it can be explained by means of a simple theoretical model based on the density matrix equations. These nano-structured particles with chirp-dependent dual behavior can be very advantageous when used in biological systems, since they can provide complementary information in different spectral ranges and tissues and are susceptible of coherent control, which can be both useful in optical microscopy and bioimaging.
Docta Complutense
Publication Artículo científico (JournalArticle)

Revisiting the crystal structure of the Y0.9Ba1.7Ca2.4Fe5O13 layered-type perovskite: New interplay of the cation ordering & the modulation of the anion sublattice

  • Martínez de Irujo Labalde, Xavier
  • Urones Garrote, Esteban
  • García Martín, Susana
Oxides of the Ln0.8-xBa0.8Ca0.4+xFe2O6-δ (Ln = Gd3+, Tb3+) systems present layered-perovskite structure asso ciated to layered ordering of Ln3+, Ba2+ and Ca2+ in combination with layered ordering of different oxygenenvironments of the Fe atoms. The compounds with formula corresponding to x = 0, 0.25 and 0.4 do not contain anion vacancies but a stoichiometric oxygen sublattice, resulting the homologous series A3m+5nFe3m+5nO8m+13n (A = Ln, Ba, Ca) with m, n = 1, 0; 1, 1; and 0, 1 respectively. The nature and ratio of the cations highly influence their ordering and the Fe-coordination polyhedra. In this sense, substitution of Ln3+ by Y3+ in the A3m+5nFe3m+5nO8m+13n oxides might modify the A-layered ordering and/or the oxygen sublattice. Y0.9Ba1.7Ca2.4Fe5O13, instead of stoichiometric YBa2Ca2Fe5O13, is prepared as single phase by ceramic method. Its characterization by means of transmission electron microscopy techniques indicates that, like in the LnBa2 Ca2Fe5O13 oxides, the Y3+, Ba2+ and Ca2+ are ordered within five different (00l)-layers in combination with the ordering of the oxygen-polyhedra around the Fe-atoms in square-based pyramids, octahedra and tetrahedra along the c-axis. However, a different superstructure with ̅̅̅ 2 √ ap x 2 ̅̅̅ 2 √ bp x 10cp unit cell, ascribed to the modulation of the [FeO4] tetrahedra within the (00l)-layers, is concluded for Y0.9Ba1.7Ca2.4Fe5O13.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Reduction of Grain Boundary Resistance of La0.5Li0.5TiO3 by the Addition of Organic Polymers

  • Boyano, Iker
  • Mainar, Aroa R.
  • Blázquez, Alberto
  • Kvasha, Andriy
  • Bengoechea, Miguel
  • De Meatza, Iratxe
  • García Martín, Susana
  • Lumbier Álvarez, Alejandro
  • Sanz, Jesús
  • García Alvarado, Flaviano
The organic solvents that are widely used as electrolytes in lithium ion batteries present safety challenges due to their volatile and flammable nature. The replacement of liquid organic electrolytes by non-volatile and intrinsically safe ceramic solid electrolytes is an effective approach to address the safety issue. However, the high total resistance (bulk and grain boundary) of such compounds, especially at low temperatures, makes those solid electrolyte systems unpractical for many applications where high power and low temperature performance are required. The addition of small quantities of a polymer is an efficient and low cost approach to reduce the grain boundary resistance of inorganic solid electrolytes. Therefore, in this work, we study the ionic conductivity of different composites based on non-sintered lithium lanthanum titanium oxide (La0.5Li0.5TiO3) as inorganic ceramic material and organic polymers with different characteristics, added in low percentage (<15 wt.%). The proposed cheap composite solid electrolytes double the ionic conductivity of the less cost-effective sintered La0.5Li0.5TiO3., We thank the Spanish Ministry for Science and Technology (MAT2007-64486-C07-05) and CDTI (ALMAGRID of the "CERVERA Centros Tecnológicos" program, CER-20191006) for financial their support. JS, AV, SG, and FG also want to acknowledge Agencia Española de Investigación /Fondo Europeo de Desarrollo Regional (FEDER/UE) for funding the projects PID2019-106662RB-C41, C42, C43, and C44.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The nickel-support interaction as determining factor of the selectivity to ethylene in the oxidative dehydrogenation of ethane over nickel oxide/alumina catalysts

  • Abdelbaki, Yousra
  • De Arriba-Mateos, Agustín
  • Solsona Espriu, Benjamin Eduardo
  • Delgado Muñoz, Daniel
  • Garcia-Gonzalez, Ester
  • Issaadi, Rachid
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Nickel oxides supported on gamma-alumina (Ni-loading from 5 to 30 wt% NiO) have been synthesized and tested in the oxidative dehydrogenation (ODH) of ethane in order to determine the importance of the NiO-support interaction. The best performance was achieved by the catalyst with 15 wt% NiO; higher NiO-loadings lead to the formation of unselective bulk-like NiO and lower Ni-loadings present high proportion of free alumina surface sites. The presence of oxalic acid and/or niobium in the synthesis gel resulted in the formation of NiO particles with similar size, but higher crystallinity and reducibility than the standard 15 wt% NiO catalyst. The obtained results have revealed that, in addition to NiO crystal size, the nickel oxide-support interaction determines the catalytic performance of these catalysts., Authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain through projects CRTl2018-099668-B-C21, MAT2017-84118-C2-1-R and PID2019-106662RB-C44 and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowl-edges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) . EGG acknowledges Dr. E. Urones for the valuable assistance in the use of electron microscopy facilities as well as to the CNME (Spain) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Te-doped MoV-Oxide (M1 phase) for ethane ODH. The role of tellurium on morphology, thermal stability and catalytic behaviour

  • De Arriba-Mateos, Agustín
  • Solsona, Benjamin
  • Garcia-Gonzalez, Ester
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Undoped and Te-doped MoV-Oxide (M1 phase) catalysts have been prepared hydrothermally (Te/Mo ratio in the synthesis gel from 0 to 0.17; and heat-treated at 400 or 600ºC in N2 atmosphere), characterized by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The morphology and microporosity of the catalysts, the nature of V-species on the catalyst surface and the catalytic performance strongly depend on the composition and the heat-treatment temperature. When calcined at 400ºC, the selectivity to ethylene decreases when the amount of tellurium increases, whereas when heat treated at 600ºC, the selectivity to ethylene increases when the Te-loading increases. These trends have been explained on the basis of the good correlation between selectivity to ethylene and the concentration of V4+ species on the surface of catalysts, in which the most selective catalyst is that prepared with a Te/Mo ratio of 0.17 and heat-treated at 600ºC., The authors would like to thank the Spanish Ministry of Economy and Competitiveness for funding the projects (MINECO/FEDER) : CRTl2018-099668-B-C21, PID2019-106662RBC44, MAT2017-84118- C2-1-R and SEV-2016-0683. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) . Authors would also like to acknowledge the "A -Team" of the ITQ (Dr. Miguel Palomino, Dr. Susana Valencia and Prof. Fernando Rey) for their assistance in the performance of the adsorption experiments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The nickel-support interaction as determining factor of the selectivity to ethylene in the oxidative dehydrogenation of ethane over nickel oxide/alumina catalysts

  • Abdelbaki, Yousra
  • de Arriba, Agustín
  • Solsona, Benjamín
  • Delgado, Daniel
  • García-González, Ester
  • Issaadi, Rachid
  • López Nieto, José Manuel
Nickel oxides supported on γ-alumina (Ni-loading from 5 to 30 wt% NiO) have been synthesized and tested in the oxidative dehydrogenation (ODH) of ethane in order to determine the importance of the NiO-support interaction. The best performance was achieved by the catalyst with 15 wt% NiO; higher NiO-loadings lead to the formation of unselective bulk-like NiO and lower Ni-loadings present high proportion of free alumina surface sites. The presence of oxalic acid and/or niobium in the synthesis gel resulted in the formation of NiO particles with similar size, but higher crystallinity and reducibility than the standard 15 wt% NiO catalyst. The obtained results have revealed that, in addition to NiO crystal size, the nickel oxide-support interaction determines the catalytic performance of these catalysts., Authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades in Spain through projects CRTl2018-099668-B-C21, MAT2017-84118-C2-1-R and PID2019-106662RB-C44 and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). EGG acknowledges Dr. E. Urones for the valuable assistance in the use of electron microscopy facilities as well as to the CNME (Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

YBaCuO-type perovskites as potential air electrodes for SOFCs. The case of YSr2Cu2FeO7+δ

  • López-Paz, Sara A.
  • Marín-Gamero, Rafael
  • de Irujo-Labalde, Xabier
  • Sánchez-Marcos, Jorge
  • Pérez-Coll, Domingo
  • Álario-Franco, M.Ángel
  • García-Martín, Susana
The electrochemical properties of YSr2Cu2FeO7+δ with YBaCuO-type structure have been studied. The temperature dependent oxygen content of this oxide has a marked influence on its p-type conducting behavior, since topochemical oxygen release occurs on heating above 673 K while reversible oxygen uptake takes place on cooling. Mixed valence Fe3+/Fe4+ and Cu2+/Cu3+ in combination with anion vacancies within the oxygen-sublattice suggest mixed (electronic and ionic) conductivity in this oxide. Electrochemical measurements indicate that YSr2Cu2FeO7+δ shows high oxygen reduction reaction activity at intermediate temperatures, revealing its potential applications as an air electrode in SOFCs., We dedicate this article to the memory of Professor Emilio Morán Miguélez. We will always remember him. We thank the Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER/UE) for funding the Projects PID2019-106662RB-C44 and MAT2016-78362-C4-4-R. D. P.-C. thanks the Project RTI2018-095088. S. L.-P. thanks the MECD for the grant FPU-016/00732. S. G.-M. and M. A. A.-F. also thank Fundación Ramón Areces (Project FRA2019/03)., Peer reviewed