Skip to main content

MATERIALES CON ALTAS PRESTACIONES PARA BATERIAS MAS SEGURAS, Y PILAS DE COMBUSTIBLES DE OXIDO SOLIDO SIMETRICAS MAS ECONOMICAS: DESARROLLO DE MATERIALES Y PROTOTIPOS

PID2019-106662RB-C41

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre FUNDACION UNIVERSITARIA SAN PABLO CEU

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Reduction of Grain Boundary Resistance of La0.5Li0.5TiO3 by the Addition of Organic Polymers

  • Boyano, Iker
  • Mainar, Aroa R.
  • Blázquez, Alberto
  • Kvasha, Andriy
  • Bengoechea, Miguel
  • De Meatza, Iratxe
  • García Martín, Susana
  • Lumbier Álvarez, Alejandro
  • Sanz, Jesús
  • García Alvarado, Flaviano
The organic solvents that are widely used as electrolytes in lithium ion batteries present safety challenges due to their volatile and flammable nature. The replacement of liquid organic electrolytes by non-volatile and intrinsically safe ceramic solid electrolytes is an effective approach to address the safety issue. However, the high total resistance (bulk and grain boundary) of such compounds, especially at low temperatures, makes those solid electrolyte systems unpractical for many applications where high power and low temperature performance are required. The addition of small quantities of a polymer is an efficient and low cost approach to reduce the grain boundary resistance of inorganic solid electrolytes. Therefore, in this work, we study the ionic conductivity of different composites based on non-sintered lithium lanthanum titanium oxide (La0.5Li0.5TiO3) as inorganic ceramic material and organic polymers with different characteristics, added in low percentage (<15 wt.%). The proposed cheap composite solid electrolytes double the ionic conductivity of the less cost-effective sintered La0.5Li0.5TiO3., We thank the Spanish Ministry for Science and Technology (MAT2007-64486-C07-05) and CDTI (ALMAGRID of the "CERVERA Centros Tecnológicos" program, CER-20191006) for financial their support. JS, AV, SG, and FG also want to acknowledge Agencia Española de Investigación /Fondo Europeo de Desarrollo Regional (FEDER/UE) for funding the projects PID2019-106662RB-C41, C42, C43, and C44.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimisation of high-performance, cobalt-free SrFe1-xMoxO3-δ cathodes for solid oxide fuel cells prepared by spray pyrolysis

  • Zapata-Ramírez, Víctor
  • Rosendo-Santos, Paula
  • Amador, Ulises
  • Mather, Glenn C.
  • Pérez-Coll, Domingo
[EN] Strontium-ferrite-based perovskites as cobalt-free cathodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs) have been analysed employing structural, stability and electrochemical studies. Neutron diffraction of SrFeO and SrFeMoO prepared by a Pechini method confirmed that SrFeO undergoes a phase transition from tetragonal to cubic symmetry at 300–400 °C, whereas Mo-doping stabilises cubic symmetry in the range RT-900 °C. Spray-pyrolysed electrodes offered significantly lower area-specific resistances of 0.2 and 0.11 Ω cm for SrFeO and SrFeMoO at 700 °C, respectively, in comparison to their analogues synthesised by the Pechini method (0.55 and 0.42 Ω cm), and lower grain size, as confirmed by scanning electron microscopy. Thermal cycling and ageing studies indicated a more robust response for the spray-pyrolysed electrodes, in particular the Mo-doped phase, which achieved a stable electrode-polarisation resistance <0.1 Ω cm for 10 heating/cooling cycles and 100 h of ageing at 700 °C. Anode-supported single cells with a thin CeGdO electrolyte produced performances of 0.5 and 0.9 W cm at 700 and 800 °C, respectively. SrFeMoO deposited by spray pyrolysis is, thus, proposed as a promising cobalt-free cathode for IT-SOFC based on its good structural stability and highly competitive electrochemical performance., The authors acknowledge the Fundación Domingo Martínez (“Ayuda a la Investigación 2017. Área de Materiales: celdas de combustible”) and “Ministerio de Ciencia, Innovación y Universidades” (RTI2018-095088-B-I00) for financial support. We also thank the Spanish MICINN and the Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER/UE) for funding the Project PID2019-106662RB-C41. UA and PRS thank University San Pablo CEU (USP CEU) for financial support. We thank Institut Laue-Langevin (ILL) for allocation of beam time (experiment code 5-21-1132 https://doi.org/10.5291/ILL-DATA. 5-21- 1132). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimisation of the electrochemical performance of (Nd,Gd)1/3Sr2/3CoO3−δ cathode for solid oxide fuel cells via spray-pyrolysis deposition and decoration with Ag nanoparticles

  • Santos, P.R.
  • Pérez-Coll, Domingo
  • Azcondo, M.T.
  • Mather, Glenn C.
  • Muñoz-Noval, I.
  • Salas, Eduardo
  • Amador, U.
  • Boulahya, K.
  • Muñoz-Gil, D.
Single-step synthesis and deposition of composite solid oxide fuel cell cathodes of composition (Nd,Gd)1/3Sr2/3CoO3−δ : Ce0.9(Gd,Nd)0.1O1.95 (70 : 30 w : w) with and without the addition of Ag nanoparticles (Ag NPs) was achieved employing spray pyrolysis and low-temperature sintering at 900 °C. Spray-pyrolysis-prepared materials offered improved microstructure with smaller particle size and higher porosity (extended triple phase boundary) in comparison to slurry-coated electrodes of analogous composition. Impedance spectroscopy of symmetrical cells of the composite air electrodes indicated a lower resistive response of the spray-pyrolysis-prepared electrodes with lower overall polarisation resistance (Rp), attributable to improved oxygen surface exchange and oxide-ion diffusion processes. Further reduction in Rp was achieved on decoration of the composite air electrodes with Ag NPs; the decorated composites were characterised by high resolution transmission electron microscopy (HRTEM) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Ag K-edge X-ray Absorption Near Edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) of Ce0.9Gd0.1O2−δ:Ag spray-pyrolysed composites indicated that the Ag nanoparticles exhibit a core-shell structure with a Ag2O outer layer calculated to be two unit cells in thickness. The outer particle shell is suggested to participate in the enhanced electrochemical response, lowering the electrode polarisation response of symmetrical cells below 700 °C. Anode-supported single-cell fuel cells corresponding to the composite air electrode with Ag NPs and a thin YSZ-CGO electrolyte provided a maximum power density of 0.6 W cm−2 at 700 °C. © 2024 The Royal Society of Chemistry., We thank the project PID2019-106662RB-C41 funded by MCIN/AEI/10.13039/501100011033 and the project PID2021-123308OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". PRS, MTA and UA are grateful to the USP-CEU for other financial support. We also thank BM5 Spline line and CSIC for allocating beamtime and facilitating access to the ESRF for XAS experiments., Supplementary material, Peer reviewed