Skip to main content

MATERIALES CON ALTAS PRESTACIONES PARA BATERIAS MAS SEGURAS, Y PILAS DE COMBUSTIBLES DE OXIDO SOLIDO SIMETRICAS MAS ECONOMICAS: DESARROLLO DE MATERIALES Y PROTOTIPOS

PID2019-106662RB-C42

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Reduction of Grain Boundary Resistance of La0.5Li0.5TiO3 by the Addition of Organic Polymers

  • Boyano, Iker
  • Mainar, Aroa R.
  • Blázquez, Alberto
  • Kvasha, Andriy
  • Bengoechea, Miguel
  • De Meatza, Iratxe
  • García Martín, Susana
  • Lumbier Álvarez, Alejandro
  • Sanz, Jesús
  • García Alvarado, Flaviano
The organic solvents that are widely used as electrolytes in lithium ion batteries present safety challenges due to their volatile and flammable nature. The replacement of liquid organic electrolytes by non-volatile and intrinsically safe ceramic solid electrolytes is an effective approach to address the safety issue. However, the high total resistance (bulk and grain boundary) of such compounds, especially at low temperatures, makes those solid electrolyte systems unpractical for many applications where high power and low temperature performance are required. The addition of small quantities of a polymer is an efficient and low cost approach to reduce the grain boundary resistance of inorganic solid electrolytes. Therefore, in this work, we study the ionic conductivity of different composites based on non-sintered lithium lanthanum titanium oxide (La0.5Li0.5TiO3) as inorganic ceramic material and organic polymers with different characteristics, added in low percentage (<15 wt.%). The proposed cheap composite solid electrolytes double the ionic conductivity of the less cost-effective sintered La0.5Li0.5TiO3., We thank the Spanish Ministry for Science and Technology (MAT2007-64486-C07-05) and CDTI (ALMAGRID of the "CERVERA Centros Tecnológicos" program, CER-20191006) for financial their support. JS, AV, SG, and FG also want to acknowledge Agencia Española de Investigación /Fondo Europeo de Desarrollo Regional (FEDER/UE) for funding the projects PID2019-106662RB-C41, C42, C43, and C44.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Order-Disorder in the Structures of Lithium Aluminosilicate Minerals by XRD and Multinuclear NMR

  • Sánchez-Muñoz, Luis
  • Sanz, Jesús M.
  • Florian, Pierre
  • Díaz-Gómez, Virginia
  • Furio, Marta
  • Sobrados, Isabel
The crystal structures of the lithium aluminosilicate minerals of the Li2O–Al2O3–SiO2 (LAS) system (Li1−xAl1−xSi1+xO4 system for 0.0 ≤ x ≤ 1.0), and bikitaite were determined by X-ray diffraction (XRD) in literature, suggesting several possible lattice models for each of the crystallized phases, because of the intrinsic experimental difficulties of this technique. Here, we correlate powder XRD patterns with Rietveld refinement of cell parameters and magic angle sample spinning multinuclear magnetic resonance (NMR) spectra, including 29Si, 27Al, 7Li, and 6Li spectroscopy at 7.05 T, 9.4 T, and 20 T. The aim is to select appropriate lattice models from short-range order schemes in the lithium aluminosilicate phases, from natural minerals and synthetic crystals from the crystallization of amorphous gel precursors by a ceramic route and also by hydrothermal high-pressure experiments. Solid solutions were found in α-quartz and α-cristobalite up to x ≥ 0.75, and in β-eucryptite and β-spodumene for 0.0 ≤ x ≤ 1.0, when the ceramic synthesis is at work. The local structures of these intermediate members of the β-eucryptite and β-spodumene solid-solution series have 29Si NMR spectra consistent with the Loewenstein’s rule, i.e., they have short-range order but are strictly non-periodic structures. However, β-eucryptite LiAlSiO4 end-member has a short-range structure compatible with the long-range order of the P6422 symmetry, when the crystallization is produced at hydrothermal conditions. The local structure of α-spodumene LiAlSi2O6 is consistent with the C2/c model. α-eucryptite LiAlSiO4 shows a short-range structure as that suggested by the R-3 lattice model. Petalite LiAlSi4O10 has a local structure compatible with the P2/a space group. Finally, the 29Si NMR spectra of bikitaite LiAlSi2O6·H2O indicate a short-range structure well-suited with the P1 symmetry. These results are consistent with the Ostwald‘s rule of stages, forming a order-disorder sequence of increasing long-range order from the starting fully disordered solid gels, through crystalline pseudoperiodic structures in non-stoichiometric solid solution crystals that respect the Lowenstein’s rule, up to fully ordered crystals with short-range structures from NMR close to the long-range structures by XRD, as in the stoichiometric compounds found in some natural minerals., This research was funded by the Ministerio de Ciencia e Innovación PID2019-106662RB-C42, and Ministerio de Economía y Competitividad MAT2017-86450-C4-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Li conductivity of Li1+xTi2(PO4)3-x(SiO4)x and Li1.2+xTi1.8In0.2(PO4)3-x(SiO4)x (0 ≤ x ≤ 0.2) NASICON series. Composition and microstructure

  • Kahlaoui, Radhouene
  • Sobrados, Isabel
  • Ternane, Riadh
  • Jiménez, Ricardo
  • Sanz, Jesús M.
Rhombohedral NASICON compounds with general formulas Li1+xTi2(PO4)3-x(SiO4)x and Li1.2+xTi1.8In0.2(PO4)3-x(SiO4)x (0 ≤ x ≤ 0.2) have been prepared via a conventional solid-state reaction and characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) and impedance spectroscopy (IS) techniques. In the Li1+xTi2(PO4)3-x(SiO4)x (0 ≤ x ≤ 0.2) series, high ''bulk'' conductivity (1.55 × 10−4 S cm−1) and low activation energy (Ea = 0.32 eV) were measured at room temperature for x = 0.1 sample. In the Li1.2+xTi1.8In0.2(PO4)3-x(SiO4)x (0 ≤ x ≤ 0.2) series, the presence of In3+ increased "bulk" and "grain-boundary" conductivities of pellets. The Li1.25Ti1.8In0.2 (PO4)2.95(SiO4)0.05 (x = 0.05) sample, with 97 % relative density, displays a maximum "bulk" conductivity of 2.35 × 10−3 S cm−1, a low activation energy of 0.26 eV, and a good ''overall'' DC-conductivity of 1.93 × 10−4 S cm−1 at room temperature. This sample can be considered a good example of a solid electrolyte in all solid-state batteries (ASSBs). In Si-rich samples, XRD patterns and 31P MAS-NMR spectra confirmed the presence of orthorhombic (S.G: Pnma) LiTiPO5 and hexagonal (S.G: P6222) SiO2 secondary phases. The formation of small SiO2 particles enhanced NASICON particle sintering and "overall" Li conductivity; however, both characteristics decreased as the silica particles grew., The authors would like to thank the Spanish Ministry of Higher Education and Scientific Research for financial support. This research was funded by the Spanish I-COOP2021-COOPB20630 and PID2019-106662RB-C42 projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced “overall” ionic conductivity in Li1+xAlxTi2−x(PO4)3 (0.3 ≤ x ≤ 0.7) ceramics prepared from sol-gel powders by spark plasma sintering

  • Martínez-Chaparro, Sandra
  • Kobylianska, Sofia D.
  • Sobrados, Isabel
  • Jiménez, Ricardo
  • Sanz, Jesús M.
The Li1+xAlxTi2−x(PO4)3 (LATPx) series displays the highest “bulk” reported conductivity, but a much lower “overall” contribution, that changes with the powder preparation and sintering conditions. In this work, the preparation of LATPx ceramics is discussed, by using the sol-gel technique for powders synthesis and mild spark plasma (SPS) for ceramics sintering at 800 °C. An “overall” conductivity ~ 2.10−3 Ω−1 cm−1 was obtained for the x = 0.4 composition, that was the result of a high “bulk” conductivity, an optimized microstructure and almost full density, in absence of micro-cracks, with a small content of secondary phases and clean grain boundaries. Fast-ion ceramics prepared by SPS are good candidates for solid electrolytes in all solid state batteries (ASSB)., This research was funded by Regional and National agencies: S2013/MIT-2753 project (Comunidad de Madrid), MAT2016-78362-C4-2R, PCIN-2017-110 (M-ERA-net 2016) and PID2019-106662RB-C42 projects (Education Ministry)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comparative study of LiTa2PO8 ceramics prepared with different lithium sources

  • Kwatek, K.
  • Ślubowska-Walkusz, W.
  • Nowiński, J. L.
  • Krawczyńska, A. T.
  • Sobrados, Isabel
  • Díez-Gómez, Virginia
  • Sanz Lázaro, Jesús
In advancing lithium-ion batteries, solid electrolytes like LiTa2PO8, a Li-ion conductor with high bulk conductivity (∼10−3 S/cm), show promise for all-solid-state battery technology. Here, we investigate the impact of different Li sources and their excess on the structural, microstructural and electrical properties of LiTa2PO8 ceramics. Employing diverse characterization techniques, including XRD, MAS NMR, TMA, SEM/EDS, IS, DC potentiostatic polarization, and density measurements, we unveil significant impact of the source of lithium ions and its excess on electrical properties. The sample without excess LiNO3 source exhibited the highest σtot = 5.2 × 10−4 S/cm at 30°C. Notably, the grain conductivity remained constant at ca. 3 mS/cm, irrespective of the chosen lithium source and excess. The microstructural analysis uncovered correlations between variations in total ionic conductivity and changes in the nature and concentration of secondary phases. Additionally, it revealed the influence of the arrangement of grains affecting the grain boundaries and porosity regions., The Polish group has received funding from "International scholarship exchange of doctoral students and academic staff" implemented as part of the Activity specified in the application for co-financing of the project no. POWR.03.03.00-00-PN13 / 18 and the National Science Centre, MINIATURA 5, 2021/05/X/ST5/00530, and SONATA 18, 2022/47/D/ST5/00362. The Spanish group has received funding from the Ministerio de Ciencia, Innovacion y Universidades PID2019-106662RB-C42, TED2021-129254B projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlation between microstructure and ionic conductivity in titanium-doped lithium tantalum phosphate (LiTa2PO8) ceramics

  • Kwatek, K.
  • Pachulska, K.
  • Ślubowska-Walkusz, W.
  • Nowiński, J. L.
  • Jastrzębski, C.
  • Krawczyńska, A. T.
  • Sobrados, Isabel
  • Díez-Gómez, Virginia
  • Sanz Lázaro, Jesús
LiTa2PO8 (LTPO) is considered as a promising candidate for application as a solid electrolyte in Li-ion technology, owing to its high grain conductivity, exceeding 1 mS/cm, and total ionic conductivity values that approach the bulk conductivity at room temperature. In this study, we investigate the effect of titanium doping on the structural, microstructural, and electrical characteristics of LTPO ceramics prepared at various sintering temperatures. While the introduction of Ti dopant into the LTPO crystal structure did not significantly alter the grain conductivity, which remained consistent at approximately 1–2 mS/cm, it induced notable changes in the microstructure and phase purity, influencing total electrical properties. However, the effect of Ti doping on total ionic conductivity was found to be less pronounced compared to the influence of the sintering process. Among the investigated samples, those sintered at 1200 °C exhibited the highest total ionic conductivity, reaching 0.49 mS/cm, highlighting the critical role of sintering temperature in optimizing the material's electrical performance., The Polish group has received funding from "International scholarship exchange of doctoral students and academic staff" implemented as part of the Activity specified in the application for co-financing of the project no POWR.03.03.00–00-PN13 / 18 - MOBILITY PW and the National Science Centre, SONATA 18, 2022/47/D/ST5/00362. The Spanish group has received funding from the Ministerio de Ciencia, Innovacion y Universidades PID2019–106662RB-C42, TED2021–129254B projects., Peer reviewed