Skip to main content

DISEÑO CON CRITERIOS DE DUCTILIDAD DE UNIONES SOPORTE-CIMENTACION EN ELEMENTOS PREFABRICADOS DE HORMIGON

BIA2009-10207

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis de maestría (MasterThesis)

Comportamiento de uniones soporte-cimentación de elementos prefabricados sometidos a carga cíclica

  • Romero García, Agustín
[ES] Los soportes de hormigón armado que forman parte de una estructura sismorresistente en lugares donde existen mayores riesgos de sismo, deben diseñarse con el objetivo de asegurar un adecuado comportamiento en cuanto a resistencia y capacidad de deformación. Estos requerimientos surgen como resultado de observaciones hechas sobre la respuesta de pilares tras un sismo intenso y aunque en el diseño se tenga el concepto de columna fuerte-viga débil, los daños en los pilares pueden ocurrir especialmente en la unión columna-cimentación. Estos elementos deben estar diseñados de forma tal, que sean capaces de ofrecer una respuesta en un rango inelástico sin una apreciable pérdida de capacidad de carga. En el presente trabajo de investigación se estudia el comportamiento de soportes sometidos a una fuerza axial constante y una carga lateral cíclica. Los parámetros de estudio y las variables consideradas en el programa experimental para el desarrollo de los ensayos son: tipo de unión soporte-cimentación y nivel de axil reducido. Se pretende analizar el comportamiento de soportes prefabricados de hormigón convencional con distintos tipos de conexión con el elemento de cimentación dado los vacíos existentes en el estado actual del conocimiento para este tipo de solicitud de carga., [EN] The reinforced concrete columns that are part of a seismic structure in places where there are greater risks of earthquake should be designed in order to ensure proper behavior in terms of strength and deformation capacity. These requirements arise as a result of observations on the response of pillars after a strong earthquake and although the design has the concept of strong column-weak beam, damage to the pillars may occur especially in the column-foundation connection. These elements must be so designed that are able to offer a response inelastic range without an appreciable loss of capacity. This research work studies the behavior of media subjected to a constant axial force and cyclic loading. The study parameters and the variables considered in the experimental program for the development of the tests are: type of joint-support foundations and reduced axial level. It aims to analyze the behavior of conventional precast concrete supports with different types of connection to the foundation element given the gaps in the current state of knowledge for this type of load application.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ductility of slender reinforced concrete columns under monotonic flexureand constant axial load

  • BARRERA PUERTO, ANGELA
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
In this paper an investigation is presented based on tests results of reinforced concrete columns subjected to monotonic flexure and constant axial load from a previous paper [1]. The variables of the tests were strength of concrete (30, 60 and 90 MPa), shear span ratio (M/(V h) = 7.5, 10.5 and 15), axial load level (0–45%), and transversal and longitudinal reinforcement ratio (1.4–3.2%). This paper is a continuation of the aforementioned but focuses on the deformation capacity, which depends on the method selected to idealize the response diagram comparing four of these methods. The results show that the parameters affecting ductility are greatly influenced by the different methods. It was observed that the ductility in displacements does not always decrease with axial load and column slenderness. In addition, a new equation is proposed to obtain the ultimate displacement for slender columns. 2012 Elsevier Ltd. All rights reserved, The authors of this work wish to thank the Research Bureau of the Spanish Ministry of Science and Innovation and the Plan E, for the funding of the project BIA 2009-10207.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Behaviour of steel-fibre-reinforced normal-strength concrete slender columnsunder cyclic loading

  • Caballero Morrison, Karen Elena
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
The inclusion of ductility requirements is necessary to guarantee the safety design of any concrete structure subjected to unexpected and/or reversal loads. It is important to outline that plastic hinges may be developed in columns of reinforced concrete buildings, especially in column-foundation joints. The deformation capacity of the column depends on its slenderness. However, few experimental tests of normal and fibre-reinforced concrete columns in the range of medium slenderness (between 5 and 10) have been performed for the case of cyclic loading. This paper presents an experimental research study on the behaviour of slender columns subjected to combinations of constant axial and lateral cyclic loads. In order to study the behaviour of this type of element fourteen experimental tests were performed. The experimental results make it possible to calibrate numerical models, and to validate simplified methods. The following variables are studied: slenderness, axial load level, transverse reinforcement ratio, and volumetric steel-fibre ratio. The maximum load and deformation capacity of the columns are analyzed. It is interesting to note that the deformation capacity depends on the four test variables analyzed. Moreover, the inclusion of steel fibres into the concrete mixture increases the deformation capacity. The inclusion of a minimum transverse reinforcement is required in order to improve the effectiveness of the steel fibres. Thus, the column behaviour suffers moderate strength losses due to cyclic loads. Finally, slenderness influences the deformation capacity if second-order effects are important, the cross-section displays ductile behaviour, and the capacity of the materials is reached., The authors of this work wish to thank the research bureau of the Spanish Ministry of Science and Innovation and the Plan E, for the funding of the Project BIA 2008-03734 and BIA 2009-10207.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental tests of slender reinforced concrete columns under combined axial load and lateral force

  • BARRERA PUERTO, ANGELA
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
The use of high strength concrete (HSC) in columns has become more frequent since a substantial reduction of the cross-section is obtained, meaning that slenderness increases for the same axial load and length, producing higher second order effects. However, the experimental tests in the literature of reinforced concrete columns subjected to axial load and lateral force focus on shear span ratios, according to Eurocode 2 (2004), clause 5.6.3., (M/(V·h)) lower than 6.5. This gap in the literature limits technological development for the construction of these structural elements. This paper presents 44 experimental tests on reinforced concrete columns subjected to constant axial load and monotonic lateral force. The aim of this is to gain greater knowledge of the types of elements which will also be of use in calibrating the numerical models and validating the simplified methods. The test parameters are strength of concrete (normal- and high-strength concrete), shear span ratio, axial load level and longitudinal and transversal reinforcement ratios. The strength and deformation of the columns were studied, and an analysis of the simplified methods from Eurocode 2 (2004) and ACI-318 (2008) concluded that both are very conservative. © 2011 Elsevier Ltd., The authors wish to express their sincere gratitude to the Spanish Ministry of Science and Innovation for the help provided through project BIA2009-10207 and to the European Union for the financial support from Feder funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Slenderness limit of the weak axis in the design of rectangular reinforced concrete non-sway columns

  • Cortés-Moreno, Eduardo
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
Most design codes (Model Code 90, ACI-318-2008 and Eurocode-2-2004) suggest that the effect of a geometrical imperfection ought to be taken into account in the most unfavorable direction when designing slender reinforced concrete columns. If the bending plane of the beam-column is related to the strong axis, this imperfection acting in the opposite direction results in the column being subjected to axial load and biaxial bending, complicating the design procedure and increasing computational costs considerably. Such standards do not indicate when this geometrical imperfection generates a notable loss of resistance in the column. This paper proposes the geometrical slenderness of the weak axis (lb/b) as the variable that determines whether or not to consider the influence of such imperfection. This paper denominates this boundary value the "slenderness limit of the weak axis" (¿g,weak), and this is associated with a loss of resistance of 10% of the bending moment of the unbraced columns with respect to non-sway columns. An approximated equation of this limit is proposed using the results of a numerical simulation. The equation is valid for rectangular columns with doubly symmetric reinforcement and both normal and high strength concrete, and also for short-term and sustained loads. © 2011 Elsevier Ltd., The authors wish to express their sincere gratitude to the Spanish "Ministerio de Ciencia e Innovacion" for help provided through projects BIA2008-03734 and BIA2009-10207 and to the European Community for financial support from Feder funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A simplified method to predict the ultimate shear stress of reinforcedconcrete membrane elements

  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
  • Bonet Senach, José Luís|||0000-0002-6687-5307
This paper presents a new simplified verification method to predict the ultimate shear stress and the mode of failure of reinforced concrete membrane elements with orthogonal reinforcement under any combination of normal stresses. This method is based on a simplified model designed to take the condition of the concrete at failure into account. The methodology is non-iterative, simple and easy to use for practical purposes. The accuracy of the verification method has been checked using test results from 88 RC membrane elements subjected to a wide range of in-plane normal and shear stresses, concrete strengths, and reinforcement ratios for both x and y directions. Moreover, the proposed method is compared with MCFT using Membrane-2000 software and other simplified methods (SMCS by Rahal 2010, the Marti-Kauffman method 1998 and the Mancini proposal 2001). The proposed method strikes a balance between a general view, accuracy and simplicity, using a wide range of tests that cover different modes of failure., The authors of this work wish to thank the research bureau of the Spanish Ministry of Science and Innovation for the funding of the projects BIA 2009-10207 and BIA 2009-11369, and the Universitat Politecnica de Valencia for the funding through the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An experimental study of steel fiber-reinforced high-strength concrete slender columns under cyclic loading

  • Caballero Morrison, Karen Elena
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Serna Ros, Pedro|||0000-0001-8754-1165
Structural engineers usually limit the use of HSC columns to seismic active zones because of their brittle behavior in comparison with NSC, even though it presents advantages both in terms of mechanics and durability. A possible solution to improve the ductile behavior of HSC columns is the use of transverse reinforcement and steel fibers simultaneously. In addition, the use of HSC makes the design of more slender columns possible, with the consequent increase of second-order effects. However, there are few experimental tests on columns of medium slenderness (between 5 and 10) subjected to cyclic loads including or excluding steel fibers. This article presents experimental research work on the behavior of slender columns subjected to combined constant compression and cyclic lateral loads. Fifteen tests were carried out in order to study the behavior of such elements. The following variables were studied: concrete strength, slenderness, axial load level, transverse reinforcement ratio, and volumetric steel-fiber ratio. The maximum load and deformation capacity of the columns were analyzed. The fact that the inclusion of steel fibers into the concrete mixture increases the deformation capacity was verified. Moreover, a minimum transverse reinforcement is required in order to improve the effectiveness of the steel fibers with no significant decrease in the carrying capacity under cyclic loading. The inclusion of steel fibers in HSC can ensure similar ductility values to those of NSC. It was shown that slenderness influences the deformation capacity., The authors of this work wish to thank the research bureau of the Spanish Ministry of Economy and Competitiveness and the Plan E, for the funding of the Project BIA 2008-03734 and BIA 2009-10207.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effective flexural stiffness of slender reinforced concrete columns under axial forces and biaxial bending

  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
Most of the design codes (ACI-318-2008 and Euro Code-2-2004) propose the moment magnifier method in order to take into account the second order effect to design slender reinforced concrete columns. The accuracy of this method depends on the effective flexural stiffness of the column. This paper proposes a new equation to obtain the effective stiffness EI of slender reinforced concrete columns. The expression is valid for any shape of cross-section, subjected to combined axial loads and biaxial bending, both for short-time and sustained loads, normal and high strength concretes, but it is only suitable for columns with equal effective buckling lengths in the two principal bending planes. The new equation extends the proposed EI equation in the "Biaxial bending moment magnifier method" by Bonet et al. (2004) [6], which is valid only for rectangular sections. The method was compared with 613 experimental tests from the literature and a good degree of accuracy was obtained. It was also compared with the design codes ACI-318 (08) and EC-2 (2004) improving the precision. The method is capable to verify and design with sufficient accuracy slender reinforced concrete columns in practical engineering design applications. © 2010 Elsevier Ltd., The authors wish to express their sincere gratitude to the Spanish "Ministerio de Ciencia e Innovacion" for help provided through projects BIA2008-03734 and BIA2009-10207 and to the European Community with the Feder funds.