Skip to main content

ESTUDIO EXPERIMENTAL Y NUMERICO DE REGIONES D PLANAS Y ESPACIALES EN ESTRUCTURAS DE HORMIGON. APLICACION A APOYOS A MEDIA MADERA Y CALICES

BIA2009-11369

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proposal and experimental validation of simplified strut-and-tie models on dapped-end beams

  • Mata Falcon, Jaime|||0000-0001-8701-4410
  • Pallarés Rubio, Luis|||0000-0003-2126-2387
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
[EN] Dapped-end beams are frequent precast concrete elements. Spalling on the top of the hanger reinforcement has been observed to be often their governing failure mode. This failure hinders the geometric definition of strut-and-tie models for design or assessment purposes. In this work, a simplified procedure for defining the geometry of strut-and-tie models considering spalling failures is proposed. The model is based on the results of a specific experimental programme consisting on twenty-eight tests on fifteen different reinforcement configurations with and without inclined reinforcement. The experimental results show that elements with high amounts of reinforcement and hanger reinforcement concentrated in one layer are more prone to spalling failures, and suggest that the geometry of strut-and-tie models is strongly influenced by the behaviour of the nodal region on top of the hanger reinforcement. The model is verified for tests with and without spalling failures, including elements from the literature, showing sound agreement between the modelling results and experimental observations., The authors wish to thank the Spanish Ministry of Science and Innovation for funding Project BIA2009-11369 and for FPI fellowship BES-2010-030353 received by the first author. This work forms part of the first author's doctoral research awarded by the Business Chair of Sustainable and Advanced Construction at the Universitat Polithcnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental and analytical investigations on the effect of steel fibers on the crack behavior and strength of dapped-end connections

  • Yu, Karin
  • Hippola, Sameera
  • Mihaylov, Boyan
  • Mata Falcon, Jaime|||0000-0001-8701-4410
[EN] Reinforced concrete (RC) dapped-end connections feature a sharp re-entrant corner subjected to high stress concentrations, leading to wide cracks under service loads and potential durability issues such as reinforcement corrosion. Effective crack control is therefore essential in the design of new dapped-end connections. Steel fiber reinforced concrete (SFRC) has shown potential to improve crack control while also enhancing ultimate strength. This study proposes a kinematics-based model to describe the response of SFRC dapped ends along the re-entrant corner crack. Appropriate constitutive relationships are used to link the deformations along the corner crack and the compression zone to the resisting forces: reinforcement and SFRC in compression and tension. The model is validated against eight large-scale tests with varying fiber amounts including detailed deformation measurements from which the resisting mechanisms and crack-opening behavior are derived. The experimental results show that a fiber amount of 70 kg/m3 reduces the crack width by about 40%, enabling compliance with code requirements. The validation demonstrates that the proposed model represents a reliable tool for designing SFRC dapped-end connections at both service and ultimate limit states., The experimental campaign was funded by the Spanish Ministry of Science and Innovation (Project BIA2009-11369). The authors wish to thank Prof. Dr. Walter Kaufmann (ETH Zurich), Prof. Dr. Pedro Miguel Sosa and Prof. Dr. Luis Pallares Rubio (Universitat Politecnica de Valencia) for supporting this research. The authors extend their gratitude to Dr. Chathura Rajapakse (University of Moratuwa) for valuable discussions. Karin Yu acknowledges support by the ETH AI Center through an ETH AI Center doctoral fellowship. Open access publishing facilitated by Eidgenossische Technische Hochschule Zurich, as part of the Wiley - Eidgenossische Technische Hochschule Zurich agreement via the Consortium Of Swiss Academic Libraries.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A simplified method to predict the ultimate shear stress of reinforcedconcrete membrane elements

  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
  • Bonet Senach, José Luís|||0000-0002-6687-5307
This paper presents a new simplified verification method to predict the ultimate shear stress and the mode of failure of reinforced concrete membrane elements with orthogonal reinforcement under any combination of normal stresses. This method is based on a simplified model designed to take the condition of the concrete at failure into account. The methodology is non-iterative, simple and easy to use for practical purposes. The accuracy of the verification method has been checked using test results from 88 RC membrane elements subjected to a wide range of in-plane normal and shear stresses, concrete strengths, and reinforcement ratios for both x and y directions. Moreover, the proposed method is compared with MCFT using Membrane-2000 software and other simplified methods (SMCS by Rahal 2010, the Marti-Kauffman method 1998 and the Mancini proposal 2001). The proposed method strikes a balance between a general view, accuracy and simplicity, using a wide range of tests that cover different modes of failure., The authors of this work wish to thank the research bureau of the Spanish Ministry of Science and Innovation for the funding of the projects BIA 2009-10207 and BIA 2009-11369, and the Universitat Politecnica de Valencia for the funding through the Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental and analytical investigation of the crack behaviour of dapped-end beams

  • Mata Falcon, Jaime|||0000-0001-8701-4410
  • Pallarés Rubio, Luis|||0000-0003-2126-2387
  • Yu, Karin L.
  • Miguel Sosa, Pedro
[EN] Reinforced concrete dapped ends are a widely used connection for precast elements in infrastructure and building structures. However, they are prone to major durability problems due to the formation of an inclined crack at the re-entrant corner of the joint. The crack typically forms at low loads and reaches a significant opening under service load conditions, causing corrosion and stress concentration in the reinforcement, which impairs the safety of the connection. The behaviour of these cracks in a highly disturbed structural region is not well understood. This paper presents the experimental results of 28 dapped-end tests in which the crack behaviour in the re-entrant corner was continuously measured using digital image correlation. The main test variables are the amount of dapped-end reinforcement, the presence of diagonal reinforcement and the ratio of horizontal to vertical dapped-end reinforcement area. The bond behaviour of the dapped-end reinforcement was estimated from the measured crack widths and reinforcement strains, assuming a pull-out mechanism with constant bond shear stresses on both crack sides. The paper proposes a model for evaluating the width of corner cracks at service loads, in which the reinforcement strains are derived from strut-and-tie models. The modelling results agreed satisfactorily well with the experimental observations of this study and 28 additional tests from the literature for dapped-ends with reinforcement diameter below 20 mm., The authors wish to thank the Spanish Ministry of Science and Innovation for funding Project BIA2009-11369 and for FPI fellowship BES-2010-030353 received by Jaime Mata-Falco <acute accent> n. A special thanks for supporting the research goes to Prof. Dr. Walter Kaufmann (ETH Zurich) .