Skip to main content

CEMENTOS HIBRIDOS: SINTESIS E HIDRATACION

BIA2013-43293-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydration of Hybrid Alkaline Cement Containing a Very Large Proportion of Fly Ash: A Descriptive Model

  • García-Lodeiro, Inés
  • Donatello, Shane
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
In hybrid alkaline fly ash cements, a new generation of binders, hydration, is characterized by features found in both ordinary portland cement (OPC) hydration and the alkali activation of fly ash (AAFA). Hybrid alkaline fly ash cements typically have a high fly ash (70 wt % to 80 wt %) and low clinker (20 wt % to 30 wt %) content. The clinker component favors curing at ambient temperature. A hydration mechanism is proposed based on the authors’ research on these hybrid binders over the last five years. The mechanisms for OPC hydration and FA alkaline activation are summarized by way of reference. In hybrid systems, fly ash activity is visible at very early ages, when two types of gel are formed: C–S–H from the OPC and N–A–S–H from the fly ash. In their mutual presence, these gels tend to evolve, respectively, into C–A–S–H and (N,C)–A–S–H. The use of activators with different degrees of alkalinity has a direct impact on reaction kinetics but does not modify the main final products, a mixture of C–A–S–H and (N,C)–A–S–H gels. The proportion of each gel in the mix does, however, depend on the alkalinity generated in the medium., : This study was funded by a research grant (BIA2013-43293-R) awarded by the Spanish Ministry of the Economy and Competitiveness (MINECO) to Ana Fernández. The participation of Post-graduate Studies Council post-doctoral grantees (2011) Shane Donatello and Ines Garcia-Lodeiro (JAE Doc 2011) was co-funded by MINECO and the European Social Fund. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Activated carbon as an alternative fuel. Effect of carbon ash on cement clinkerization

  • Husillos Rodríguez, N.
  • Martínez-Ramírez, S.
  • Blanco-Varela, María Teresa
9 págs.; 7 figs.; 10 tabs., Spent activated carbon is a by-product of potabilization plants. The present study explored the feasibility of valorizing this waste as an alternative fuel to replace oil coke in portland clinker furnaces. This involved determining its composition, calorific value, and ash and heavy metal content. Since the ash generated by spent activated carbon firing is taken up by the clinker, the possible effect of such uptake on clinkerization or the properties of the clinker obtained were also ascertained. Although spent activated carbon has an 18% lower calorific value than oil coke, one of the traditional cement kiln fuels, it was found to be apt for the purpose envisaged. Its ash content (10 wt%) is one order of magnitude higher than the ash content in coke. Spent activated carbon ash contains substantial proportions of anhydrite and quartz, hematite and augite, but consists primarily of amorphous matter (59 wt%). The effect of this ash on clinker phases was studied by clinkerizing raw meal in which it was used as a replacement for clay. Such meal exhibited high burnability and yielded clinkers with a composition and mineralogy comparable to the properties found in the industrial product. The sulfate present in the ash induced substantial alite crystal growth in the clinker. The loss of minority elements during clinkerization was likewise studied. © 2016 Elsevier Ltd. All rights reserved., This study was conducted under the leadership of Aguas de Barcelona as part of a CENIT 2007-1039 (National Strategic Consortia for Technical Research) project entitled “Technological development of a self-sustainable urban water cycle” (SOSTAQUA), funded by the Spanish Centre for Industrial Technological Development (CDTI). It has been also funded from BIA 2013-47876-C2-1-P and BIA2013- 43293-R projects., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanical-chemical activation of coal fly ashes: An effective way for recycling and make cementitious materials

  • Fernández-Jiménez, Ana
  • García-Lodeiro, Inés
  • Maltseva, O.
This paper is wholly committed to resource efficiency through the valorization of waste from other industries, and more specifically fly ash as a raw material to produce concrete-like geopolymers. In particular, this study aimed to determine the effect of the physical and chemical characteristics of recycled coal fly ash used to manufacture alkaline cement on reaction kinetics and product microstructure and performance. The ash was mixed with 8 M NaOH and cured for 20 h at 85°C and RH > 90% to form a compact paste, after which mechanical strength was determined and the reaction rate was calculated using isothermal conduction calorimetry. The findings showed that vitreous content (SiO2/Al2O3), reactive and (especially) fineness play a very important role in both the development of cement mechanical strength and the composition and structure of the reaction products formed., This research was funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects BIA2013-43293-R, BIA2016-76466-R, and RTC2016-4872-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Mechanochemical activation of fly ashes a way to make concretes with high levels of substitution: hybrid concretes

  • Cabrera, Oscar
  • Viejo-Mariño, David
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
  • Maltseva, O.
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., The objective pursued in this study was to determine the mechanical properties and some technological characteristics of a few concrete formulations containing a high level of fly ash. Three concrete options were considered with respect the fly ash addition: i) concrete TO (prepared by adding original fly ash); ii) concrete TM (prepared with mechanically activated fly ash); iii) concrete TMA (prepared with mechano-chemical activated fly ash). The pozzolanic activity of the fly ash as function of the type of activation procedure (TO, TM or TMA) was determined by the Frattini method and also by the Activity Index. The effect of the fly ash in the hydration kinetics was also determined by conduction calorimetry. Finally the effect in the mechanical strength development was determined in a H-30 concrete. Results of this research indicate that the mechano-chemical treatment of the fly ash (TMA), allows to develop a compressive strength of 30 MPa at 28 days for a replacement level (fly ash for OPC) of 50%., This research was funded by the Spanish Ministry of the Economy and Competitiveness and funds FEDER under research projects BIA2013-43293-R and BIA2016-76466-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization and hydration of cements and pastes obtained from raw mix containing Moroccan oil shale and coal waste as a raw material

  • Chhaiba, Salma
  • Blanco-Varela, María Teresa
  • Diouri, A.
  • Bougarrani, S.
In the present work, the hydration and physical properties of cements obtained from a raw mixes containing oil shale and coal waste as an alternative raw material were explored. A study of clinkers was carried out using chemical analysis and Rietveld analysis and the hydrated products were characterized by conduction calorimetry, X-ray diffraction, FTIR, Differential thermal analysis-thermal gravimetry and Scanning electron microscope. The findings showed that the cement paste containing both oil shale and coal waste had the highest compressive strength. According to the hydration studies, the four hydration steps were observed in all cements. The conduction calorimetry study showed the formation of the calcium monosulfoaluminate phase (AFm) in all cements which in cement containing coal waste was retarded by 50 h due to the high Na2O concentration in its clinker. Further, the identified hydration products: C-S-H gel, portlandite and Afm phase, which detected by XRD, FTIR and ATD/TG have been observed morphologically in SEM images. Moreover, the EDX microstructural study revealed that C-S-H gel contains a less amount of Aluminum and sulfur., This paper has been carried out as part of a CSIC-Mohammed V University of Rabat, cooperation programm (iCOOPA20067). Facilities given by IETcc (CSIC) and funding from BIA 2013-47876-C2-1-P and BIA BIA2013-43293-R projects as well as the Regional Government of Madrid Community and European Social Fund (Geomaterials Programme2 S2013/MIT-2914) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Moroccan oil shale and coal waste as alternative raw materials in Portland cement clinker manufacture. Clinkerisation reactions and clinker characterisation, Esquistos bituminosos como materia prima alternative en la fabricación de clínker de cemento Portland. Reacciones de clinkerización y caracterización del clínker.

  • Chhaiba, Salma
  • Blanco-Varela, María Teresa
  • Diouri, A.
[EN]: For some time the cement industry has been seeking procedures to effectively lower the higher energy costs involved in cement manufacture. Timahdit oil shale and Jerada coal waste could potentially be used as alternative raw materials to produce clinker. This study explored the possibility of applying those materials to a greener use, based on the reactivity and burnability of raw mixes containing Moroccan oil shale and coal waste. The findings showed that, irrespective of particle size, oil shale mixes delivered higher reactivity than coal waste materials, although reactivity was highest in the oil shale clinker with a particle size < 45 μm. The clinkers bearing oil shale with a particle size < 90 μm or a blend of oil shale and coal waste with a size < 45 μm contained higher proportions of alite ( > 70 %)., [ES]: La industria cementerabusca desde hace algún tiempo procedimientos que reduzcan el alto consumo de energía de la producción de cemento. La pizarra bituminosa de Timahdit (BOS) y los desechos de carbón de Jerada (CW) se pueden utilizar potencialmente como materiales alternativos en la fabricación de clinker. Este estudio se enfoca en evaluar esta posibilidad, valorizar dichos materiales y considerar un uso más ecológico para ellos. Exploramos la reactividad y la aptitud a la cocción de mezclas crudas de clínker que contienen BOS o CW. La reactividad de los crudos que contienen BOS es mejor que la de los que contienen CW, independientemente de su tamaño de partícula, siendo el que contiene BOS con un tamaño de partícula <45 μm, la más reactiva. Los clínkeres que contienen BOS o la mezcla de BOS y CW (tamaño de partícula <90 μm y 45 μm respectivamente) contienen proporciones de alita >70%., This paper has been carried out as part of a CSIC-Mohammed V University of Rabat, cooperation programm (i-COOPA20067). Facilities given by IETcc (CSIC) and funding from BIA 2013-47876-C2-1-P and BIA BIA2013-43293-R projects as well as the Regional Government of Madrid Community and European Social Fund (Geomaterials Programme2 S2013/MIT-2914) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Temperature effect on performance of Portland cement versus advanced hybrid cements and alkali-Fly ash cement

  • Qu, Bo
[ES]: El objetivo principal de este trabajo es estudiar el efecto de la temperatura en diferentes conglomerantes con un bajo contenido de clinker y elevados contenidos de adiciones minerales (“Suplementary cementitious materials”, SCMs), contenidos superiores a los contemplados en los cementos compuestos (Blended cement). Esos nuevos materiales han sido considerados como una de las posibles soluciones para enfrentar el problema ambiental causado por la industria tradicional del cemento, especialmente las emisiones de CO2. En concreto los conglomerantes estudiados han sido: i) OPC: cemento Portland comercial tipo CEM I 42.5 como referencia; ii) HYC: cementos alcalinos híbridos preindustrial compuesto de un 30% de clinker de cemento Portland y un 70% de SCMs (mezcla de escoria, cenizas volantes y activador sólido (en diseño); iii) HYP: cemento preindustrial compuesto por un 50% de Clinker de cemento belitico, y 50% de cenizas volantes junto a una pequeña fracción de activador sólido (en diseño); iv) FAN: cenizas volantes activadas alcalinamente (sin Clinker), como activador se empleó una disolución de NaOH 8M (referencia). La investigación se ha centrado en el estudio del efecto de la temperatura en el proceso de hidratación temprana (en el proceso de pre-curado), así como, en el efecto de la exposición de las pastas endurecidas a elevadas temperatura (entre 200 y 1000 ºC) En primer lugar, se estudió como la temperatura de curado en las primeras 20 horas (25 ± 1 o 85 °C d) afecta a la hidratación inicial de estos materiales aglutinantes. Se exploró el efecto de la temperatura de curado inicial sobre la cinética de hidratación y el desarrollo de resistencias mecánicas a 2 y 28 días. También se determinó su efecto sobre los productos de reacción formados y la microestructura desarrollada. Los productos de hidratación formados se caracterizaron usando XRD, SEM/EDX y 27Al y 29Si MAS-NMR. Los resultados obtenidos mostraron que HYC y HYP al hidratarse con agua a temperatura ambiente (25 ± 1 ºC) fraguan y endurecen alcanzando unos valores de resistencia mecánica a compresión superior a 30 MPa, a los 28 días. El principal producto de reacción formado fue una mezcla de geles cementosos: C-(A)-S-H y C-A-S-H para HYC y una mezcla de C-(A)-S-H, C-A-S-H y (N,C)-A-S-H para HYP. Curando a 85 °C durante 20 horas, presentaron un comportamiento similar al OPC, inhibieron la formación de ettringita y generaron geles más polimerizados, mejorando la resistencia mecánica de tres días, pero no de 28 o 90 días. En segundo lugar, en lo que respecta al comportamiento de las pastas endurecidas a elevadas temperaturas (desde 200 hasta 1000 ºC), se realizaron dos tipos de ensayos: (1) ensayo para determinar la resistencia mecánica, el módulo elástico y la tenacidad a la fractura de los materiales hasta 1000 ºC “in situ” y (2) prueba para evaluar el comportamiento post-tratamiento térmico después de 2 horas de exposición a temperaturas que van desde 400 ºC a 1000 ºC. Los cambios mineralógicos y micro-estructurales que tienen lugar en los materiales se estudiaron por XRD, SEM/EDX y 27Al y 29Si MAS-NMR, DTA / TG. Los cambios en la distribución del tamaño de poro de las pastas cementantes también fueron estudiados por MIP después del calentamiento a temperaturas ≥ 600 ºC. Los resultados obtenidos muestran que las pastas OPC perdieron totalmente la resistencia entre 400 y 600 ºC, sin embargo, las pastas de HYC e HYP presentaron una mejor resistencia a altas temperaturas que las pastas cementantes OPC. La pasta FAN mostró buena resistencia residual después de su exposición al calor. Sin embargo, a temperaturas superiores a 800 ° C, presenta un importante evento de contracción (especialmente en la prueba in situ) y grandes cambios en la porosidad, que se asoció con un proceso de sinterización parcial y la formación de nuevas fases minerales. Las diferentes fases formadas en los cementos en función de la temperatura de exposición se asocian con la diferente composición química de los cementos de partida y también con la diferente composición y microestructura del gel o geles mixtos que se formaron durante la hidratación. Los resultados obtenidos con los cuatro materiales cementantes estudiados pueden dar una idea general de la relación entre la composición elemental y el rendimiento a altas temperaturas. Será un factor importante a tener en cuenta al determinar el rendimiento a alta temperatura de futuros cementos y hormigones. Resumiendo, los hallazgos de este trabajo mostraron que cementos con bajos contenidos en Clinker pueden ser manufacturarse industrialmente. Estos cementos con elevados contenidos de SCMs en presencia de un activador alcalino (solido) presentan un desarrollo mecánico adecuado y pueden tener un mejor comportamiento a elevadas temperaturas que los cementos tradicionales de OPC., [EN]: The main objective of this work is to study the effect of temperature on some specific cementitious binder materials with low clinker content and higher supplementary cementitious materials (SCMs) than blend cements. Those novel materials have been considered as one of potential solution to face environment issue caused by traditional cement industry especially CO2 emission. Specifically cements studied were: i) OPC: A commercial Portland cement Type CEM I 42.5R as reference; ii) HYC: pre-industrial hybrid alkaline cements contain 30 % of Portland cement clinker, 70 % mix of slag, fly ash and little solid activator (in design); iii) HYP: Pre-industrial cement: 50 % belite cement clinker and 50 % mix of fly ash and little solid activator (in design); iv) FAN: Alkali-activated fly ash binder (free clinker, activated by sodium hydroxide, as reference). Research has focused on the study of the effect of temperature on the early hydration process (in the pre-cure process), as well as on the effect of high temperature on hardened pastes (between 200 and 1000 ºC). First, it was studied how the curing temperature in the first 20 hours (25 ± 1 or 85 ° C d) affects the initial hydration of these binder materials. The effect of the initial curing temperature on the hydration kinetics and the development of mechanical resistance at 2 and 28 days were explored. Its effect on the reaction products formed and the developed microstructure was also determined. The hydration products formed were characterized using XRD, SEM / EDX and 27Al and 29Si MAS-NMR. The results obtained showed that HYC and HYP when hydrated with water at room temperature (25 ± 1 C) set and harden reaching mechanical compressive strength values over 30 MPa, at 28 days. The main reaction product formed was a mix of cementitious gels: C-(A)-S-H and C-A-S-H for HYC and a mix of C-(A)-S-H, C-A-S-H and (N, C)-A-S-H for HYP. Curing at 85C for 20 hours, they performed behaviour similar to OPC, inhibited ettringite formation and generated more polymerised gels, enhancing 3-day but not 28- or 90-day mechanical strength. Secondly, with regard to the behaviour of the hardened pastes at high temperatures (from 200 to 1000 ºC), two types of tests were carried out: (1) trial to determine the mechanical strength, the elastic modulus and the fracture toughness of materials up to 1000 ºC “in situ” and (2) trial to evaluate post-thermal behaviour after two hours of exposure to temperatures ranging from 400 ºC to 1000 ºC. The mineralogical and micro-structural changes that take place in the materials were studied by XRD, SEM/EDX and 27Al and 29Si MAS-NMR, DTA/TG. The changes in the pore size distribution of the cementing pastes were also studied by MIP after heating at temperatures ≥ 600 ° C. The OPC pastes totally lost the resistance between 400 and 600 ºC; however, the pastes of the HYC and HYP performed better high-temperature resistance than the OPC cementitious pastes. The FAN paste showed good residual strength after heat exposure. However, at temperatures above 800 ° C, it presents an important event of contraction (especially in the in situ test) and large changes in porosity, which was associated with a partial sintering process and the formation of new mineral phases. The different phases formed in the cements as a function of the exposure temperature are associated with the different chemical composition of the starting cements and also with the different composition and microstructure of the gel or mixed gels that were formed during hydration. The results obtained with the four cementitious materials studied can give a general idea of the relationship between elemental composition and high temperature performance. It will be an important factor to consider when determining the high temperature performance of future cement and concrete. In summary, the findings of this work showed that cements with low Clinker content can be manufactured industrially. These cements with high contents of SCMs in the presence of an alkaline activator (solid) have a suitable mechanical development and can have a better behaviour at high temperatures than traditional OPC cements., Gobierno de España: BIA2013-43293-R - Cementos híbridos: síntesis e hidratación; BIA2016-76466-R -CSIC - Avances en ciencia y tecnología de cementos híbridos- sostenibles. Universidad Politécnica de Madrid. China Scholarship Council and Universidad Politécnica de Madrid for providing scholarship, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Manufacture of hybrid cements with fly ash and bottom ash from a municipal solid waste incinerator

  • García-Lodeiro, Inés
  • Carcelen-Taboada, V.
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
Concerns about the large volume of fly ash and bottom ash generated by the incineration of municipal solid waste (MSW) have induced the scientific community to seek ways to reduce their environmental impact. One of the proposals that has been researched most intensely is their valorisation as supplementary cementitious materials and aggregates in Portland cement-based pastes, mortars and concretes. The present paper proposes an alternative use for this waste: as a raw material in alkali-activated hybrid cements. A hybrid cement developed for that purpose by blending 60 wt% clinker and 40 wt% incinerator bottom ash and fly ash exhibited good 28-day mechanical strength (upward of 32.5 MPa). The leaching of potentially toxic metals present in the hybrid cement as a result of the inclusion of MSW fly ash and bottom ash was tested with different leaching procedures. The findings and the results of the analysis of the leaching parameters measured (Li, Fij…) showed that the hybrid cement proposed can effectively immobilise the potentially hazardous metals present in MSW fly ash and bottom ash., This research was funded by the Spanish Ministry of the Economy and Competitiveness under projects BIA2013-43293-R and RTC-2014-2351-5. One of the authors worked under a Post-graduate Studies Council grant co-funded by the Spanish National Research Council and the European Social Fund (ESF)., Peer reviewed