Skip to main content

OPTIMIZACION DE LA LIMPIEZA CON LASER DE PATINAS DESARROLLADAS SOBRE GRANITOS Y ROCAS AFINES. APLICACION A LA CONSERVACION DEL PATRIMONIO

BIA2014-54186-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Cleaning of gypsum-rich black crusts on granite using a dual wavelength Q-Switched Nd: YAG laser

  • Pozo Antonio, José Santiago
  • Papanikolaou, Athanasia
  • Philippidis, Aggelos
  • Melessanaki, Kristalia
  • Rivas Brea, Maria Teresa
  • Pouli, Paraskevi
Gypsum black crust is one of the most severe deterioration forms affecting the built Cultural Heritage (CH) worldwide. Its removal from granitic substrates is necessary since gypsum layer favours the deterioration of the rock. This study investigates the laser assisted removal of gypsum black crust, from a Hercynian granite from the North-West (NW) Iberian Peninsula. The suggested laser cleaning methodology involves the combination of two wavelengths (1064 nm and 355 nm) from a QS Nd:YAG laser system and is based on their simultaneous interaction with the involved materials at various fluence values and FIR/FUV ratios (1/1, 1/3 and 3/1). This ablative scheme was initially introduced in order to overcome undesirable discoloration issues recorded upon single wavelength laser cleaning of black crusts but its role to effectively remove different undesired over-layers was also acknowledged. The results of this study were comparatively evaluated with surfaces irradiated using one of the two specific wavelengths, while the presence of water as an enhancing cleaning agent was also considered. A multi-analytical evaluation methodology based on stereomicroscopy, Raman spectroscopy, Fourier Transform Infrared spectroscopy (FTIR) and Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy (SEM-EDS), was carried out to determine the optimum cleaning strategy in terms of crust removal effectiveness and minimisation of damages to the substrate. The optimum irradiation condition determined in this study is the simultaneous application of the two wavelengths in FIR/FUV = 1/1 ratio (with FIR = FUV = 0.3 J·cm−2) on a pre-wetted surface. Under this irradiation condition a high removal level of carbonaceous pollution particles and gypsum was achieved, without any damage to the granitic minerals in the form of melting and spallation and/or exfoliation of planes of biotite and K-feldspar and cleavage fracture of quartz., Xunta de Galicia, Universidade de Vigo, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017-32771, Ministerio de Economía y Competitividad | Ref. BIA2014-54186-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Laser versus scalpel cleaning of crustose lichens on granite

  • Rivas Brea, Maria Teresa
  • Pozo Antonio, José Santiago
  • López de Silanes Vázquez, María Eugenia
  • Ramil Rego, Alberto
  • López Díaz, Ana Jesús
This paper addresses the evaluation of the cleaning of crustose lichens developing on granite. The evaluation was performed considering the effectiveness of the cleanings and harmfulness exerted on the granite. The laser cleaning of lichen was compared with the most conventional procedure, scalpel. The combination of both procedures was also tested. The study, which was carried out with two different species of crustose lichen, was also focused on the influence of the intrinsic characteristics of the lichen on the effectiveness. The cleanings were evaluated by optic and electronic microscopies, FTIR and colour spectrophotometry. A previous characterization of the lichen and its interaction with the granite using those analytical techniques were also performed. The laser cleaning effectiveness depends on the coverage and the colour of the lichen; also, the prior mechanical weakening of the lichen by scalpel seemed to improve the laser cleaning. The darkest lichen was satisfactorily removed by laser and with the combined cleaning. Conversely, the lightest lichen was more difficult to extract with laser than the darkest lichen, being necessary to apply both methods sequentially. Despite laser and the combination of methods cleaned satisfactorily the surface, they were unable to eliminate the thalli into fissures., Ministerio de Economía y Competitividad | Ref. BIA2014-54186-R, Universidade de Vigo
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Influence of the commercial finishes of ornamental granites on roughness, colour and reflectance

  • López, Ana
  • Pozo Antonio, José Santiago
  • Ramil, Alberto
  • Rivas Brea, Teresa
[Abstract] The effects of the four common commercial finishes (polished, honed, disc cutting and bush hammering) on several properties of ornamental granites were evaluated. Two granites of different texture, widely used as ornamental stones in NW Iberian Peninsula, were selected. Roughness, colour and reflectance (properties used as cleaning indicators of cultural heritage objects) of the surfaces subjected to each finish were characterized and the correlations among these parameters were obtained. The results show that the roughness generated by disk cutting and polishing is higher in Vilachán than in Rosa Porriño, showing that the finer the grain size, the higher the roughness generated. The lightness parameter (L∗) in CIELAB space is dependent on the roughness of the surface. The rest of the colour parameters (a∗, b∗, C∗ab and hab) does not depend on roughness and they are related mostly with the colour of the surface by itself. Reflectance features are not affected by the different content of forming minerals and superficial colour which condition the reflectance intensity of each commercial finish. Reflectance is directly related with the roughness of the granite; the rougher the surface the higher the reflectance intensity. In addition, the lightness L∗ and the reflectance are directly related while the other colour parameters do not show any relation with the reflectance. These results can be used as an aesthetical criteria in order to standardize an objective methodology to evaluate the cleaning effectiveness in the conservation of cultural heritage objects., This work was supported by the Spanish project BIA2014-54186-R funded by Ministerio de Economía y Competitividad. SEM-EDS analysis were performed at the Centro de Apoyo Científico y Tecnológico a la Investigación – CACTI University of Vigo. Roughness parameters were measured in Servicio de Apoyo a la Investigación-SAI University of A Coruña. J.S. Pozo-Antonio was supported by a postdoctoral contract with the University of Vigo within the framework of the 2011–2015 Galician Plan for Research, Innovation and Growth (Plan I2C) for 2014.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Influence of the weathering rate on the response of granite to nanosecond UV laser irradiation

  • Rivas Brea, Teresa
  • Pozo Antonio, José Santiago
  • Ramil, Alberto
  • López, Ana
[Abstract]: Laser ablation is an accepted cleaning technology for cultural heritage stonework. Optimized laser ablation may,however, have different side effects depending on the mineralogical composition of the stone. In the case of graniticrocks, observed side effects – colour changes, fracturing or/and mineral melting – have been attributed to laser parameter interactions with the patina to be cleaned from this complex rock with a grained texture and polymineral composition. We describe the influence of the weathering degree of a granite on its response to laser irradiation, confirming that the existence of secondary minerals in the rock influences the intensity and typology of side effects. Knowledge of this influence is of special relevance to the conservation of heritage builtwith Western European Variscan granites, which are already slightly weathered in quarry. Two specimens of the same Variscan granite taken from the same quarry but with different colours (suggesting different weathering rates)were subjected to nanosecond (ns)Nd:YVO4 laser irradiation,working at 355nm(UV irradiation) under different fluences. The specimens responded very differently to laser irradiation in terms of colour changes and resistance of the main minerals to laser radiation. The existence on one of the specimens of kaolinite deposits covering feldspar grains and Fe oxyhydroxides filling fissures seemed to be the reason for the different response to laser radiation. Our findings would suggest the need, during laser interventions, to take into account – in addition to texture and porosity – the degree of weathering of this particular kind of granite, widely used in the architectural and archaeological heritage of Western Europe, This work was supported by the Spanish research project BIA2014-54186-R. J.S. Pozo-Antonio's research was supported by the Ministry of Economy and Competitiveness-Government of Spain through grant IJCI-2017-32771. We thank Ailish Maher for revising the English in a version of this manuscript.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Development of processing strategies for 3D controlled laser ablation: Application to the cleaning of stonework surfaces

  • López, Ana
  • Lamas, Javier
  • Pozo Antonio, José Santiago
  • Rivas Brea, Teresa
  • Ramil, Alberto
[Abstract] Laser cleaning is an environmentally friendly method based on laser ablation processes to remove impurities or contaminants from a surface layer of a material. The configuration of a laser station in the case of flat surfaces is not complicated because laser irradiates from a fixed position. In contrast, controlled laser processing of 3D surfaces is not yet completely solved because the laser beam must be scanned along a three dimensional (3D) path. In this paper, a 3D laser processing strategy was developed to achieve an accurate and successful cleaning of freeform surfaces. Laser processing trajectories can be programmed directly on the 3D surface model instead of the 2D projection, which ensures both constant fluence and constant scanning speed all over the 3D surface during the laser processing. The strategy was applied to the removal of spray paint from a granite carved skirting board in order to validate the 3D cleaning system. The results, evaluated by means of hyperspectral imaging, stereomicroscopy and scanning electron microscopy, were compared with those of the surfaces treated with the same parameters but deactivating the 3D processing system. These analyses confirmed the improvement of the cleaning process when the 3D processing system is applied., This work was supported by the Spanish Government Research Projects BIA2017-85897-R and BIA2014-54186-R. J. Santiago Pozo-Antonio was supported by a postdoctoral contract awarded by the University of Vigo within the framework of the 2011–2015 Galician Plan for Research, Innovation and Growth (Plan I2C) for 2014.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A computer vision system for identification of granite-forming minerals based on RGB data and artificial neural networks

  • Ramil, Alberto
  • López, Ana
  • Pozo Antonio, José Santiago
  • Rivas Brea, Teresa
[Abstract]: Granitic stones are widely used in the field of Cultural Heritage in the north-western Iberian Peninsula. In some activities regarding conservation, such as the laser cleaning, it is of great interest the identification of the minerals on the granitic stone surface in order to improve the treatment and to avoid damages by means of the adaption of the fluence to each different forming mineral. The aim of this work is the optimization of a back propagation artificial neural network (ANN) in order to obtain the rapid and reliable identification of forming minerals in granitic rocks by means of RGB images. Our goal is, eventually, in situ monitoring the laser cleaning of granitic stonework. The results obtained, though preliminary, led a high degree of correct identification of the forming minerals for three different granitic types., This work has been supported by the Spanish Research Project BIA2014-54186-R funded by Ministerio de Economía y Competitividad. The authors would like to thank INGEMARGA S.L., especially to Miguel Martinez for his kind attention. J.S. Pozo-Antonio was supported by a postdoctoral contract with the University of Vigo within the framework of the 2011–2015 Galician Plan for Research, Innovation and Growth (Plan I2C) for 2014.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Laser versus scalpel cleaning of crustose lichens on granite

  • Rivas Brea, Teresa
  • Pozo Antonio, José Santiago
  • Ramil, Alberto
  • López, Ana
[Abstract]: This paper addresses the evaluation of the cleaning of crustose lichens developing on granite. The evaluation was performed considering the effectiveness of the cleanings and harmfulness exerted on the granite. The laser cleaning of lichen was compared with the most conventional procedure, scalpel. The combination of both procedures was also tested. The study, which was carried out with two different species of crustose lichen, was also focused on the influence of the intrinsic characteristics of the lichen on the effectiveness. The cleanings were evaluated by optic and electronic microscopies, FTIR and colour spectrophotometry. A previous characterization of the lichen and its interaction with the granite using those analytical techniques were also performed. The laser cleaning effectiveness depends on the coverage and the colour of the lichen; also, the prior mechanical weakening of the lichen by scalpel seemed to improve the laser cleaning. The darkest lichen was satisfactorily removed by laser and with the combined cleaning. Conversely, the lightest lichen was more difficult to extract with laser than the darkest lichen, being necessary to apply both methods sequentially. Despite laser and the combination of methods cleaned satisfactorily the surface, they were unable to eliminate the thalli into fissures., This work was supported by the Spanish Research Project BIA2014-54186-R. SEM and FTIR analyses were performed in support research services of University of Vigo (CACTI). J.S. Pozo-Antonio was supported by a post-doctoral contract with the University of Vigo within the framework of the 2011–2015 Galician Plan for Research, Innovation and Growth (Plan I2C) for 2014