Skip to main content

METODOLOGIAS DE REFUERZO DE ESTRUCTURAS DE MAMPOSTERIA CON TRM FRENTE A CARGAS SISMICAS: ESTUDIOS NUMERICO Y EXPERIMENTAL.

BIA2015-69952-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Parametric dynamic interaction assessment between bells and supporting slender masonry tower

  • Bru, David
  • Ivorra Chorro, Salvador
  • Betti, Michele
  • Bartoli, Gianni
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Recent years have seen a growing interest toward implementation and testing of structural health monitoring techniques for cultural heritage structures, and many scientific papers report on the application of operational modal strategies as an effective knowledge based tool for vulnerability reduction of masonry buildings. Focusing on historic masonry bell-towers, being such structures particularly prone to earthquake-induced damage, the most part of the studies discuss structural monitoring and vibration-based identification methods with the goal of their seismic protection. As a consequence, while there is great number of researches that investigate masonry towers behaviour under earthquake loads, only a few scientific papers discuss their structural response under service loads such as bell-loads. This issue is also of paramount importance, since in many real cases the bell ringing has been stopped due to the dynamic interaction phenomena that are activate between the bells and the host structure. With the aim to contribute of improving the knowledge in this field, this paper focuses on a methodology for the study of the dynamic interaction between bells and slender masonry towers. The proposed methodology is divided into four phases: (i) Geometric and structural characterization of the tower and bells; (ii) Evaluation of the dynamic forces generated by the swinging bells; (iii) Experimental campaign to characterize the dynamic properties of the tower by means of operational modal analysis; (iv) Parametric finite element analysis. To illustrate the methodology, a real case of masonry bell-tower in which bell-ringing had to be stopped due to a history of strong vibrations is discussed. The paper includes a method of analysing the dynamic properties of masonry bell-towers, in which the dynamic interaction between the harmonic bell forces and the fundamental tower modes is analysed by means of a calibrated numerical model and the dynamic amplification factor. (C) 2019 Elsevier Ltd. All rights reserved., The authors are grateful to the Spanish Ministry of Economy and Competitiveness, who partially supported this study by Grant BIA2015-69952-R and BES-2013-064068.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Mechanical and dynamic properties of TRM with different fibers

  • Bru, David
  • Torres, Benjamín
  • Baeza, F. Javier
  • Ivorra, Salvador
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Torres, Benjamín|||/items/605a19b9-d11e-44d5-b7d8-28a71eaaaa72
To perform the structural analysis of masonry walls reinforced with composite materials based in textile fiber reinforced mortars (TRM) it is necessary to know the mechanical characteristics of TRM materials. This work presents the experimental campaign developed on mortar plates reinforced with of glass and carbon fiber meshes. Several 4x4x16 mm mortar specimens has been tested under compression and bending forces to obtain the maximum capacity in tension and in compression. The technique has been validated with the simultaneous application of the ultrasound technique to evaluate evolution with the maturation, both of the modulus of elasticity and the Poisson's coefficient. Finally, TRM plates of 400x100x10 mm have been manufactured. These plates have been tested using an Erudite MkIV electronic resonant frequency test system to determine the transverse resonant frequency and, through them, the dynamic modulus of elasticity and the damping factor of the TRM material. This analysis has been carried out at different ages. Finally, the stress-strain curves have been evaluated after 56 days. A combination of different reinforcements with fiberglass and carbon has been tested. With these results, it has been possible to evaluate the maximum capacity in tension and in compression of this material as well the modulus of elasticity and damping factor. These values are necessary to define any type of reinforcement in masonry walls.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Stone masonry confinement with FRP and FRCM composites

  • Estevan, Luis
  • Baeza, F. Javier
  • Bru, David
  • Ivorra, Salvador
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Estevan, Luis|||/items/5f18efe7-6bb3-4f03-8105-197f6c652db1
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
In the last decades, there are many reports on the use of composites as reinforcement of structural elements under compression, especially regarding the confinement of concrete structures, but works on stone or masonry columns are limited. Initially, FRP jackets were used because their high structural performance. However, they present some drawbacks like aesthetics or water impermeability, which can affect their applicability in historical constructions made in stone. Recently, FRCM appeared as an alternative with better compatibility with masonry structures. In the present study, a comparison between different composite materials to confine masonry specimens was made. FRPs with carbon or glass fibers and epoxy matrix, and FRCM with basalt or glass fiber mesh in a cementitious matrix were used to confine masonry, made in calcarenite cylindrical pieces and lime mortar. Strength and ductility gains under compressive loads were measured, and compared to the recommendations of different guidelines. Unidirectional FRPs were the optimal solution from a strengthening point of view. On the other hand, FRCM confinement offered more ductility than unreinforced masonry, but showed a softening behavior. Finally, regarding the studied design codes, the specific parameters included for masonry structures seemed enough to obtain accurate predictions of the compressive strength increase due to the confinement with the tested composites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Dynamic changes on a masonry cross vault after a forced damage

  • Bru, David
  • Ivorra, Salvador
  • Torres, Benjamín
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Torres, Benjamín|||/items/605a19b9-d11e-44d5-b7d8-28a71eaaaa72
This work shows the preliminary results related to the evaluation of the dynamic behavior of a 5x5 m masonry cross vault after undergoing different changes in its structural behavior. It has been built using solid clay bricks and lime and sand mortar. The cross vault has been built in the laboratory specifically for carrying out these tests and evaluating its structural behavior. A device has been designed to be able to carry out a controlled settling of one of its supports without causing an instantaneous collapse of the structure. Dynamic identification using OMA was performed by installing seismic accelerometers at several selected points on the structure, using ARTEMIS software to analyze the results. The evolution of the dynamic characteristics was carried out in four different states: (i) After construction (ii) After the generation of generalized damage through the forced settlement of one of its supports. (iii) After repair using Textile Reinforced Mortars (TRM) (iv) After generating new damage by settling one of its supports in the TRM repaired structure. After the generation of the damage in the structure, important cracks are observed in various points of the structure, although no situation was reached that would foresee a possible collapse. The repair with TRM has consisted of the introduction of fiberglass mesh bands coated in lime and sand mortar. These bands have been arranged forming a cross in the upper part of the structure and in all the edge arches of the structure. In all these phases the OMA was developed under a situation of ambient vibrations, where these vibrations levels were very low due to the situation inside of a laboratory. After each of these phases, their main frequencies, their vibration modes and the structural damping factor of each of the identified modes have been obtained. It is observed how a loss of rigidity of the vault occurs after the production of damage and how it completely recovers by means of reinforcement and repair with TRM. An increase in the damping ratio of practically all the vibration modes has been detected when the structure is damaged, although after repair with TRM these values are reduced again.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Parametric dynamic interaction assessment between bells and supporting slender masonry tower

  • Bru, David
  • Ivorra, Salvador
  • Betti, Michele
  • Adam Martínez, José Miguel
  • Bartoli, Gianni
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
Recent years have seen a growing interest toward implementation and testing of structural health monitoring techniques for cultural heritage structures, and many scientific papers report on the application of operational modal strategies as an effective knowledge-based tool for vulnerability reduction of masonry buildings. Focusing on historic masonry bell-towers, being such structures particularly prone to earthquake-induced damage, the most part of the studies discuss structural monitoring and vibration-based identification methods with the goal of their seismic protection. As a consequence, while there is great number of researches that investigate masonry towers behaviour under earthquake loads, only a few scientific papers discuss their structural response under service loads such as bell-loads. This issue is also of paramount importance, since in many real cases the bell-ringing has been stopped due to the dynamic interaction phenomena that are activate between the bells and the host structure. With the aim to contribute of improving the knowledge in this field, this paper focuses on a methodology for the study of the dynamic interaction between bells and slender masonry towers. The proposed methodology is divided into four phases: (i) Geometric and structural characterization of the tower and bells; (ii) Evaluation of the dynamic forces generated by the swinging bells; (iii) Experimental campaign to characterize the dynamic properties of the tower by means of operational modal analysis; (iv) Parametric finite element analysis. To illustrate the methodology, a real case of masonry bell-tower in which bell-ringing had to be stopped due to a history of strong vibrations is discussed. The paper includes a method of analysing the dynamic properties of masonry bell-towers, in which the dynamic interaction between the harmonic bell forces and the fundamental tower modes is analysed by means of a calibrated numerical model and the dynamic amplification factor.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Comparativa numérico experimental de elementos de mampostería a compresión diagonal

  • Bru, David
  • Torres, Benjamín
  • Varona Moya, Francisco de Borja
  • Reynau, Ricardo
  • Ivorra, Salvador
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Torres, Benjamín|||/items/605a19b9-d11e-44d5-b7d8-28a71eaaaa72
  • Varona Moya, Francisco de Borja|||/items/b2f78412-2138-4bd9-a2e5-a9b3e391373e
Las estructuras de fábrica de mampostería son un sistema estructural tradicional con una elevada vulnerabilidad sísmica debida a su reducida resistencia a tracción. Con el fin de mejorar el comportamiento sísmico de muros de mampostería pueden emplearse diversas técnicas, como por ejemplo la aplicación de refuerzos externos. Una alternativa actual serían los morteros reforzados con fibra (FRCM, Fiber Reinforced Cement Matrix), que se componen normalmente de una malla bidireccional (de fibra de vidrio, carbono o basalto) y una matriz cementicia. El empleo de los FRCM en las estructuras de mampostería incrementa su resistencia y mejora su ductilidad. El objetivo de este trabajo es comprobar la eficiencia de esta técnica de refuerzo (FRCM) como mejora de la resistencia a corte producida por los esfuerzos de corte asociadas con las acciones sísmicas. Para ello se presentan los resultados experimentales medidos en ensayos de compresión diagonal en muros reforzados a una o dos caras y con diferentes tipos de malla de refuerzo (vidrio y carbono). Se ha observado un incremento de resistencia y ductilidad, para todos los casos de refuerzo ensayados. Además se han definido modelos numéricos que sean capaces de reproducir los resultados experimentales registrados, con el fin de evaluar la mejora del refuerzo, tanto a nivel de carga como a nivel de ductilidad.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Influence of masonry bonding patterns on the diagonal compressive strength of brick walls

  • Reynau, Ricardo
  • Bru, David
  • Ivorra, Salvador
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
During the 19th and 20th centuries, brick and masonry load-bearing walls were widely used in the construction of residential and public buildings. These structural elements exhibit relatively low compressive strength and brittle failure behavior under horizontal seismic loads. Moreover, the internal arrangement of brick units and mortar joints varies according to the masonry bond pattern selected by master builders, directly impacting the wall’s mechanical performance. This study aims to clarify how different masonry bond patterns influence the structural integrity of these walls, specifically examining diagonal compressive strength, transverse elastic modulus, and detailed failure typologies and zones. To achieve these insights, two complementary testing methods were employed: traditional displacement sensors and digital image correlation (DIC), an advanced optical technique that captures high-resolution strain and crack propagation data. Findings indicate that crack patterns and shear strength significantly depend on the masonry bond type, highlighting the critical role of bonding arrangements in determining a wall’s resilience and failure behavior under loading. These results provide a refined understanding of the factors contributing to masonry wall collapse, with specific bond types showing distinct vulnerability or resistance patterns. Overall, this research offers valuable guidance for the assessment, preservation, and reinforcement of historical masonry structures, allowing engineers and conservation specialists to better anticipate structural responses and mitigate potential risks associated with lateral and seismic forces.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Numerical Model of TRM-Reinforced Masonry Walls Under Lateral In-Plane Loads

  • Ivorra, Salvador
  • Bru, David
  • Baeza, F. Javier
  • Torres, Benjamín
  • Foti, Dora
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Torres, Benjamín|||/items/605a19b9-d11e-44d5-b7d8-28a71eaaaa72
The development of Textile Reinforced Mortar (TRM) has offered new potential for a number of applications in the field of structural strengthening. Its advantages over other strengthening techniques – such as compatibility with substrates, lower costs, better performance at high temperatures and high ductility – make the TRM vital for unreinforced masonry structures which are most vulnerable to seismic loadings. This paper presents a non-linear numerical simulation with a 2D finite element analysis (FEA) of TRM reinforced masonry walls under lateral in-plane loading. Simulations include the modelling of walls with and without openings; walls were modelled through a non-linear shelllayered element; brick masonry wall was modelled as a continuous material using two overlapping layers with different mechanical characteristics. The TRM was defined as a single shell of material for the mortar matrix and the mesh glass fibre applied through two layers that make up the reinforced plaster applied to the two faces of the wall. The increment of the maximum horizontal load and the high increment of ductility of the TRM retrofitted have been observed. Results provide a prediction of the plane’s structural behaviour in order to propose a reinforcement method for masonry structures using a TRM.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Experimental Damage Identification in Masonry Structures by OMA

  • Bru, David
  • Ivorra, Salvador
  • Camassa, Domenico
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
This paper presents a study carried out in different types of masonry structures to identify existing damage through dynamic identification techniques using operational modal analysis. A cross vault, a masonry wall and a simple clay brick construction have been analyzed. The three cases have been tested on a full scale in the laboratory. The cross vault has been subjected to a settlement of one of its supports, the damage has occurred and then it has been repaired by using Textile Reinforced Mortars (TRM). In the case of the wall and the simple construction, the damage has been generalized by means of horizontal loads simulating a seismic action by a cyclic incremental load, after the generation of the damage, it has been repaired using TRM. In all cases, a dynamic identification has been carried out prior to the generation of the damage, after the generation of the damage and later after its repair, finally after a new process of damage the structural health changes have been monitored. In the four phases, an identification of the dynamic characteristics of the structures has been carried out, both main frequencies and damping factor associated with each mode shape. Regarding operational modal analysis, the first vibration modes have been identified. Singular Value Plot have been obtained through the EFDD technique. In general terms, the results of the investigation showed that the effect of cracking generated by both horizontal cyclic loads and vertical displacements located in one of the supports generated a decrease in the vibration frequencies and an increase in the structural damping factors for the different vibration modes. On the other hand, in relation to the effect of the reinforcement techniques employed, the results showed the feasibility of recovering or even slightly increasing the stiffness of the original damaged structure. However, the results for the strengthened structures also showed that the intervention on the damaged structure tended to reduce the structural damping factors with respect to the unreinforced structure. In addition, it was also observed that after the tests the reinforced and newly damaged structures showed dynamic characteristics very similar to the unreinforced damaged structures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Evaluación experimental mediante análisis digital de imágenes del comportamiento de muros de mampostería frente a cargas cíclicas en su plano

  • Torres, Benjamín
  • Bru, David
  • Varona Moya, Francisco de Borja
  • Baeza, F. Javier
  • Ivorra, Salvador
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
  • Torres, Benjamín|||/items/605a19b9-d11e-44d5-b7d8-28a71eaaaa72
  • Varona Moya, Francisco de Borja|||/items/b2f78412-2138-4bd9-a2e5-a9b3e391373e
El presente artículo se centra en el comportamiento estructural de muros de mampostería con hueco de ventana sometidos a cargas cíclicas en su plano. Para ello, se realizó una campaña experimental a escala real donde se fabricaron muros de 3 x 2 metros con un hueco central, siguiendo para ello las recomendaciones de las normas españolas para diseño sísmico. Con el objetivo de mejorar la resistencia y ductilidad, un muro se ha reforzado a dos caras mediante el sistema Textile Reinforced Mortar (en adelante TRM). El comportamiento de los muros ha sido analizado en términos de resistencia, ductilidad, comportamiento cíclico, degradación de rigidez y capacidad de disipación de energía. Todos los ensayos fueron monitorizados empleando sensores LVDT, así como la técnica de correlación de imagen. Los resultados muestran que el TRM aumenta la resistencia mecánica, el desplazamiento último, disipa más cantidad de energía y controla la propagación de la fisuración.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Seismic Behavior of a Masonry Chimney Retrofitted with Composite Materials: A Preliminary Aproach

  • Bru, David
  • Ivorra, Salvador
  • Baeza, F. Javier
  • Baeza, F. Javier|||/items/e40f041d-5b10-47fa-abd4-dd4fb5f526b6
  • Bru, David|||/items/00098396-76d2-44fc-8652-746908d86a33
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
This paper presents a structural analysis of a masonry chimney, which is being catalogued as local interest heritage, according Eurocode 8. The chimney, located in Alicante (Spain), is severely damaged, and it shows several longitudinal cracks, and mortar loss between bricks. In order to guarantee the structural safety under seismic forces, the chimney was retrofitted with composite materials. This reinforcement comprised an internal textile reinforced mortar (TRM) layer, i.e. glass fiber mesh and cement matrix, and local reinforcement with longitudinal carbon fiber bands. This study consisted of two stages: first, numerical and experimental analyses of the original chim- ney were done. Second, design of an internal reinforcement scheme was done. The experimental text includes acceleration measures under ambient vibration for an operational modal analysis. And laboratory test for bricks and mortar to study the mineralogical composition and mechanical properties. The numerical analysis includes, preliminary pushover analysis before and after the reinforcement was done, and second, linear response spectrum analysis to evaluate the structural stability under the seismic demand.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Simple model for predicting the vibration transmission of a squat masonry tower by base forced vibrations

  • Ivorra, Salvador
  • Giannoccaro, Nicola Ivan
  • Foti, Dora
  • Ivorra, Salvador|||/items/f458a5ac-f699-440d-ad8a-ca0b6fec91bd
This paper presents the analysis of the dynamic performances of a simple model related to a squat masonry tower situated in the Swabian Castle of Trani (Italy). The main objective of this paper is to introduce a novel strategy based on a simple model validated by experimental data for defining the influence of the excitation frequency on the structural damping dynamic transmission. To this aim, first, the accelerations have been acquired simultaneously in 23 points of the tower at different levels, both due to environmental vibrations and due to a series of sinusoidal forced vibrations applied at the base by using an electro‐hydraulic shaker device specifically designed for the tests. Four different excitation frequencies have been then selected for exciting the structure. An operational modal analysis has been carried out by the environmental recordings and with the different forcing loads obtaining a very good correlation of the identified frequencies in all the cases. Then a digital filtering process has been applied over all the recorded signals to evaluate the specific contribution for each frequency generated by the shaking device at each level of the tower. Increments of damping ratio have been detected with these forced vibrations at the base. Finally, a simple frame numerical model has been developed to reproduce the dynamic amplification at the most significant locations of the tower. It has been updated not only to have the same main frequencies and modal shapes but also to get a similar response under forced vibrations at the base. A good correlation has been obtained between the model and the real structure for the base forced vibrations at different excitation frequencies in order to correctly predict the dynamic behaviour of the structure.