Skip to main content

APLICACIONES DE SISTEMAS GEOPOLIMERICOS OBTENIDOS A PARTIR DE MEZCLAS DE RESIDUOS: MORTEROS,HORMIGONES Y ESTABILIZACION DE SUELOS

BIA2015-70107-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Rice straw ash: A potential pozzolanic supplementary material for cementing systems

  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Santamarina Siurana, M. Pilar|||0000-0002-2461-9794
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Akasaki, Jorge Luis
[EN] Biomass waste from rice straw has many management problems, including field firing causing severe air pollution and natural organic decomposition resulting in methane emission. The conversion of this waste to ashes may offer the possibility of reusing them in cementing systems. For the first time ashes from different parts of the rice plant (Oryza sativa) were characterised from the chemical composition point of view: rice leaf ash (RLA), rice leaf sheath ash (RlsA) and rice stem ash (RsA). Microscopic studies on ashes revealed heterogeneity in the distribution of chemical elements in the remaining cellular structure (spodograms). The highest concentration of SiO2 was found in dumbbell-shaped phytoliths (%SiO2 > 78%). In the global chemical composition of ashes, SiO2 was also the main oxide present. According to Vassilev¿s classification of chemical composition, RLA belongs to the K-MA zone (medium acid), RlsA to the K-zone (low acid) and RsA to the S-zone (high acid). Calcination temperatures ¿550 ¿C completely removed organic matter from the straw and ashes underwent significant sinterisation by calcining at 650 ¿C due to the presence of potassium chloride. Here, ashes from global straw (rice straw ash, RSA) are characterised (via X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetry) and tested from a reactivity point of view (reaction towards calcium hydroxide) in order to assess the possibility for its reuse in cementing systems. Results from pastes made by mixing RSA and calcium hydroxide showed that the pozzolanic reactivity of the ashes is important (hydrated lime fixation of 82% for 7 days and 87% for 28 days in RSA:hydrated lime paste) and cementing C S H gel is formed after 7 and 28 days at room temperature. Compressive strength development of Portland cement mortars with 10% and 25% replacements by RSA yielded 107% and 98% of the strength of control mortar after 28 days of curing. Frattini test confirmed the pozzolanicity of the RSA blended cements. These reactivity results are very promising in terms of the potential reuse of ashes in cementing systems., The authors acknowledge the financial support of the Ministerio de Economia y Competitividad MINECO, Spain, and FEDER funding [Project: B1A2015-70107-R] The authors thank the Electron Microscopy Service of the Universitat Politecnica de Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Use of residual diatomaceous earth as a silica source in geopolymer production

  • Font-Pérez, Alba
  • Reig, L.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] The use of binders as an alternative to Portland cement has gained importance in recent years. Among them, geopolymeric binders, developed by the reaction between an aluminosilicate precursor and a high alkalinity solution, have become one of the most promising alternatives. The activating solution generally comprises waterglass and sodium hydroxide. Since waterglass is the most expensive material and has a high environmental impact, using alternative silica sources will lead to more sustainable binders. Previous studies have successfully used rice husk ash (RHA) as a silica source. This research aims to assess the possibility of using diatomaceous earth (or diatomite) as an alternative silica source, like the previous studies with RHA. Diatomite is a sedimentary rock with a high amorphous silica content formed by fossilized diatom remains. In this work, the geopolymer was obtained using a fluid cracking catalyst residue as the precursor and six different activating solution types prepared with commercial products, residual diatomite (from beer and wine industries) and RHA. The results open a new possible route for the reuse and recovery of diatomaceous earth residue, although the compressive strength results of the mortars were slightly lower than those for mortars prepared with RHA or commercial reagents., This work has been financially supported by the Spanish education, culture and sport ministry through the project BIA 2015-70107-R. Thanks are given to Heineken, Bodegas Vicente Gandia, OMYA, Dacsa and JJ Minerals for providing the materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of rice straw ash as a pozzolanic addition in cementitious mixtures

  • Hidalgo, Samantha
  • Font, Alba
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
[EN] Rice husk ash is one of the most widely studied biomass ashes used in pozzolanic addition. Given its lower silica content, rice straw ash (RSA) has been explored less often, despite the fact that, according to the United Nations Food and Agriculture Organization (FAO), rice straw (RS) production is estimated at 600 million tons/year. In this work, RSA was physically and chemically characterized, and its pozzolanic properties were assessed. A controlled conditioning, burning, homogenization and grinding procedure was carried out to obtain RSA from RS. Chemical composition, insoluble residue, reactive silica, chloride content and particle size distribution were assessed for ash characterization. To determine RSA pozzolanicity, Frattini, electrical conductivity and pH measurements in an aqueous suspension of hydrated CH/RSA mixtures were obtained. Portland cement (PC) mortars with 15% and 30% RSA substitutions evaluated. The mechanical tests showed specimens with a strength activity index up to 90% and 80% with 15% and 30% RSA, respectively, after 3 days, and these values grew to 107¿109% after 90 curing days, This research was funded by the Spanish Government and FEDER funds (MINECO/FEDER-Project RTI2018-09612-B-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Salt slag recycled by-products in high insulation geopolymer cellular concrete manufacturing

  • Font-Pérez, Alba
  • Moraes, J.C.B.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] This investigation presents an important contribution to the understanding of the ¿zero discharge in the aluminium cycle¿ goal. The salt slag recycled by-product was reused as alternative aerating agent in the manufacture of cellular concretes: fluid catalytic cracking catalyst (FCC) ¿ based geopolymer (GCC) and blast furnace (BFS) ¿ based alkali-activated (AACC). The hydrogen emission test was used to evaluate the gas releasing properties because of the presence of metallic aluminium in the salt slag. Density (kg/cm3), compressive strength (MPa) and thermal conductivity (W/mK) for GCC were 75, 6.9 and 0.31 and for AACC were 602, 7.5 and 0.16., The authors give special grateful to Befesa Aluminio S.L (Valladolid, Spain) for the granulated paval supply. The authors would also thanks to Cementval and BPOil for precursors supplying. Thanks are given to the Electron Microscopy Service of the Universitat Politècnica de València (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stabilization of soil by means alternative alkali-activated cement prepared with spent FCC catalyst

  • Cosa-Martínez, Juan
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
[EN] Alkali-activated cements are widely studied as alternative and sustainable binder in soil stabilization. In this research work, a mold was designed and constructed, which allowed small cubic specimens to be made (40 x 40 x 40 mm(3)). With the newly designed mold, cubic samples of soil stabilized with portland cement (OPC) and alternative AAC (based on spent fluid catalytic cracking catalyst FCC) were prepared from which compressive strength was obtained. Cylindrical specimens were also prepared using the same binders as in the previous case to obtain their compressive strength. The results obtained in both cases were compared. Greater resistances for cubic samples were achieved. The cubic specimens were selected for being better in terms of standard deviation of compressive strength for AAC stabilized soil. The obtained compressive strength and standard deviation results were compared between the soil specimens stabilized with different stabilizers cured at 7, 14, 28, and 90 days. The method allows small-sized cubic specimens to be prepared. It improves ergonomics. It also facilitates a large number of specimens being obtained with a small amount of sample. Soil stabilized with AAC yielded higher compressive strength after 90 days compared to that with OPC., Spanish Ministry of Economy and Competitiveness, Grant/Award Number: BIA2015 70107-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of Thermochemical Treatments for Rice Husk Ash Valorisation as a Source of Silica in Preparing Geopolymers

  • Bouzón, Noelia
  • Font, Alba
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] The use of geopolymers has revolutionized research in the field of construction. Although their carbon footprint is often lower than that of traditional mortars with Portland cement, activators such as sodium silicate have a high environmental impact in the manufacturing of materials. Employing alternative alkali sources to produce geopolymers is necessary to obtain materials with a lower carbon footprint. The present research explores the use of rice husk ash (RHA) as an alternative source of silica to produce alkaline activators by four methods: reflux; high pressure and temperature reaction; thermal bath at 65 C; and shaking at room temperature. To evaluate the efficiency of these methods, two types of experiments were performed: (a) analysing silica dissolved by the filtering/gravimetric method; and (b) manufacturing mortars to compare the effectiveness of the treatment in mechanical strength terms. The percentages of dissolved silica measured by the gravimetric method gave silica dissolution values of 70¿80%. The mortars with the best mechanical strength results were the mixtures prepared with the thermal bath treatment at 65 C. Mortar cured for 1 day (at 65 C), prepared with this activator, yielded 45 MPa versus the mortar with commercial reagents (40.1 MPa). It was generally concluded that utilising original or milled RHA in preparing activators has minimal influence on either the percentage of dissolved silica or the mechanical strength development of the mortars with this alternative activator., European Union-Next Generation (Maria Zambrano for attraction of international talent).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Compressive Strength and Microstructure of Alkali-Activated Binary Cements Developed by Combining Ceramic Sanitaryware with Fly Ash or Blast Furnace Slag

  • Cosa-Martínez, Juan
  • Reig, L.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
[EN] The properties of a binder developed by the alkali-activation of a single waste material can improve when it is blended with different industrial by-products. This research aimed to investigate the influence of blast furnace slag (BFS) and fly ash (FA) (0¿50 wt %) on the microstructure and compressive strength of alkali-activated ceramic sanitaryware (CSW). 4 wt % Ca(OH)2 was added to the CSW/FA blended samples and, given the high calcium content of BFS, the influence of BFS was analyzed with and without adding Ca(OH)2. Mortars were used to assess the compressive strength of the blended cements, and their microstructure was investigated in pastes by X-ray diffraction, thermogravimetry, and field emission scanning electron microscopy. All the samples were cured at 20 °C for 28 and 90 days and at 65 °C for 7 days. The results show that the partial replacement of CSW with BFS or FA allowed CSW to be activated at 20 °C. The CSW/BFS systems exhibited better mechanical properties than the CSW/FA blended mortars, so that maximum strength values of 54.3 MPa and 29.4 MPa were obtained in the samples prepared with 50 wt % BFS and FA, respectively, cured at 20 °C for 90 days., This research received financial support from the Spanish Ministry of Science and Innovation through Project APLIGEO BIA2015-70107-R and FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of calcium additiions on the compressive strength and microstructure of alkali-activated ceramic sanitaryware

  • Reig, L.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] The ceramic sanitary-ware market generates large amounts of waste, both during the production process and due to construction and demolition practices. In this paper, the effect of different amounts and calcium sources (calcium hydroxide Ca(OH)2, calcium aluminate cement CAC, Portland cement PC) on the alkaline activation of ceramic sanitary-ware waste (CSW) was assessed. Blended samples were activated with NaOH and sodium silicate solutions and cured for 3 and 7 days at 65°C. The maximum amount of calcium source-type added to the system varied according to its influence on the compactability of the mortars.CSW was physico-chemically characterized and the compressive strength development of activated samples was assessed on the mortars. The nature of the reaction products was analyzed in pastes, by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy and microscopic studies. The results show a great positive influence with the addition of moderate amounts of Ca(OH)2, PC and CAC on the mechanical properties. Among the typical hydrates usually observed in plain water-hydrated PC or CAC, only AH3 and a small amount of C3AH6 were identified in the alkali-activated CSW/CAC blended pastes, which indicates that Al and Ca from PC, CAC and Ca(OH)2 are taken up in the newly formed (N,C)-A-S-H or C-A-S-H gels., Spanish Ministry of Science and Innovation, Grant/Award Number: APLIGEO BIA2015-70107-R, GEOCEDEM BIA 2011-26947; Electron Microscopy Service of the Universitat Politecnica de Valencia; FEDER
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of sugar cane straw ash (SCSA) as solid precursor and the alkaline activator composition on alkali-activated binders based on blast furnace slag (BFS)

  • Moraes, J.C.B
  • Akasaki, Jorge Luis
  • J.L.P.Melges
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Alkali-activated materials (AAM) comprise one of the solutions to diminish the use of Portland cement in building construction and, consequently, a reduction in the environmental problems related to CO2 emissions and energy consumption may be achieved. These kinds of binders are obtained when a mineral precursor (calcium silicate or aluminosilicate material) is mixed with an alkaline solution. In this study, the blast furnace slag (BFS) combined with a new waste from the sugar cane industry, sugar cane straw ash (SCSA), is utilised. This new residue was studied replacing partially the blast furnace slag in BFS/SCSA proportions of 100/0, 85/15, 75/25, 67/33 and 50/50. The alkaline solution concentration plays an important role in obtaining AAM with good mechanical properties. Therefore, this paper intends to assess the influence of the activating solution (composed of sodium hydroxide and sodium silicate) through different H2O/Na2O (called g) and SiO2/Na2O (called e) molar ratios. For BFS/SCSA proportions of 100/0 and 75/25, the g values assessed were 22, 28 and 37, whereas the e values selected were 0 and 0.75. In order to study the effects of SCSA in the mixture, other BFS/SCSA proportions (0¿50% replacement) were assessed by only g and e ratios of 28 and 0¿0.75, respectively. To reach these objectives, mortars and pastes were manufactured in order to study their behaviour in the following tests: compressive strength (3, 7, 28 and 90 days of curing at 25 C), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), mercury intrusion porosimetry (MIP) and field emission scanning electron microscopy (FESEM). The results showed that the alkaline solution influenced the compressive strength development, and specimens reached more than 60 MPa after 90 days of curing, The authors would like to thanks to CNPq processo no 401724/2013-1 and the "Ministerio de Educacion, Cultura y Deporte" of Spain ("Cooperacion Interuniversitaria" program with Brazil PHB-2011-0016-PC). Thanks are also given to the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimum use of sugar cane straw ash (SCSA) in alkali-activated binders based on blast furnace slag (BFS)

  • Moraes, J.C.B
  • Melges, J.L.P.
  • Akasaki, J.L.
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Alkali-activated binders (AABs) are a material obtained from the combination of a solid precursor and an alkaline activating solution. In this study, one solid precursor used was blast-furnace slag (BFS) and the other was an agro waste: sugar cane straw ash (SCSA). Sodium hydroxide was used for preparing activating solutions. In order to reach the potential reactivity of the SCSA, a study varying the BFS/SCSA mass ratio and H2O=Na2O molar ratio was carried out. The BFS/SCSA ratio varied from 100=0 to 70=30, and H2O=Na2O was studied in the range of 11.1¿18.5. To fulfill this objective, specimens were assessed by their compressive strength of mortars and microstructural studies of pastes [X-ray diffraction (XRD); thermogravimetric analysis (TGA); Fourier transform infrared spectroscopy (FTIR); and field emission scanning electron microscopy (FESEM)] in the curing time range of 3¿90 days at 25°C. Results from these tests showed that the best BFS/SCSA and H2O=Na2O ratios were 70=30 and 18.5, respectively. This study revealed an interesting valorization of the SCSA as a complementary precursor in BFS-based AABs because of the improvement of mechanical properties and the reduction in the consumption of BFS in AAB, The authors would like to thank CNPq processo n° 401724/2013-1, CNPq processo n° 140779/2015-0, and the Ministerio de Educación, Cultura y Deporte of Spain ( Cooperación Interuniversitaria program with Brazil PHB-2011-0016-PC). Thanks are also given to the Electron Microscopy Service of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New eco-cellular concretes: sustainable and energy-efficient material

  • Font-Pérez, Alba
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Mellado Romero, Ana María|||0000-0002-2105-154X
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Chemistry is an essential science for understanding and developing construction materials. Specifically, the application of the green chemistry concept to the cement sector may allow the fabrication of new environmentally friendly materials with good sustainability and energy efficiency. Cellular concretes are an excellent alternative to conventional concrete in terms of thermal insulation and material economy. In this paper, the development of waste-based cellular concrete is presented; due to its good performance and low environmental impact, this focus is warranted. Three different cellular concrete systems were investigated: (i) traditional cellular concrete based on ordinary Portland cement and commercial aluminium powder; (ii) geopolymer cellular concrete applying alkali-activated chemical technology with a comparison of the use of two precursors, fluid catalytic cracking catalyst residue (FCC) and blast furnace slag (BFS), and recycled aluminium foil as an aerating agent; (iii) eco-cellular concrete, where commercial waterglass was replaced by an agro-industrial by-product, rice husk ash (RHA), in the activating solution. The development of geopolymer cellular concretes with different precursors and activating solutions has proven that the production of this type of concrete using different types of precursors is possible, depending on the availability of by-products and wastes. The densities, compressive strengths, and thermal properties of the three cellular concrete systems are assessed and a complete study on the carbon footprints of the developed concretes is presented. The results show that the alternative concretes have densities from 474 to 813 kg m¿3 , with compressive strengths from 2.6 to 4.6 MPa and thermal conductivities from 0.083 to 0.281 W m¿1 K¿1. In the case of the cellular concrete prepared using RHA in the activating reagent, the heat released from the dissolution of NaOH pellets in water dissolved the soluble silica present in the ash. This production method resulted in a reduction of its carbon footprint by 78%., The authors acknowledge financial support from the Universitat Politecnica de Valencia (UPV) through the internal project GEOCELPLUS. The authors would also like to express special gratitude to Dr Mrs Josefa L. Rosello Caselles for the recycled aluminium foil and to the Electronic Microscopy Service of the UPV. Thanks are given to DACSA, Cementval and BPOil for supplying samples.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the pozzolanic reactivity of sugar cane straw ashes (SCSA) bured under controlled conditions

  • Rodrigues, Michelle S.
  • Savastano Jr., Holmer
  • Beraldo, Antonio L.
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
[EN] The aims of this work were to evaluate the reactivity of sugarcane straw ashes (SCSA) burned under controlled conditions and to analyze their reactivity in blended cement and hydrated lime pastes by thermogravimetric analysis (TG) and calorimetry. Four different ashes were produced, and burned at 600 °C, 700 °C, 800 °C and 900 °C (SCSA600, SCSA700, SCSA800 and SCSA900, respectively). These ashes were characterized by X-ray fluorescence spectroscopy, X-ray diffractometry, particle size distribution by laser diffraction and specific area surfaces to assess their potential interest in the partial replacement of inorganic binders (Portland cement (OPC) and hydrated lime). The hydrated lime pastes were subjected to scanning electron microscopy (SEM) and TG. The blended cement pastes were analyzed by TG and calorimetry, compressive strength testing and mercury intrusion porosimetry. High lime fixation percentages were observed in the hydrated lime and OPC pastes and were higher than 75% and 50% for the ashes burned at 600 °C and 700 °C, respectively. Calorimetry showed a delay in the heat release of SCSA600 and SCSA700 compared to the control paste. These pastes also had higher compressive strength and a smaller total pore volume. The results indicate the positive response of preparing sugar cane ashes under controlled conditions (mainly for straw calcined within the 600¿700 °C range) for their use as pozzolanic addition by partially replacing inorganic binders., The authors wish to thank the Brazilian agency CNPq for their financial support of this work and the Central de Tecnologia Canavieira for providing the sugar cane straw used in this research. We dedicate this work to our dear Antonio Ludovico Beraldo (in memory) for his friendship, his contribution to science and his teaching of students with all our gratitude.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vegetable ashes as Supplementary Cementitious Materials

  • Martirena, F.
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
[EN] Approximately 140 billion metric tons of biomass are produced every year in the world from agriculture. The ashes resulting from firing agricultural wastes such as rice husk, sugar cane and others can be used as Supplementary Cementitious Materials (SCM). They can be mixed with lime alone or in ternary mixtures with Portland cement and lime. If fired at temperatures around 600-700 °C the agricultural ashes exhibit good reactivity. Despite extensive research work carried out on the use of agricultural ashes as source of SCMs, few success stories are reported on practical applications on an industrial scale. Details of the firing technology should be re-assessed, with special emphasis on the scale at which the technology begins to be economically suitable. Further research is also needed to understand the mechanisms of structural transformation of amorphous silica during calcination, and the impact of the ashes on cement hydration in blended systems.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of sewage sludge ash on mechanical and microstructural properties of geopolymers based on metakaolin

  • Istuque, D.B.
  • Akasaki, J.L.
  • Melges, J.L.P.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
[EN] This paper explored the effect of sewage sludge ash (SSA) on the mechanical and microstructural properties of geopolymers based on metakaolin (MK) involving two different SiO2/Na2O molar ratios (0.8 and 1.6), two temperature curing conditions (25 degrees C and 65 degrees C) and various ages of curing (1, 3, 7, 14, 28, 90 or 180 days). The geopolymers were characterized using different techniques as X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and compressive strength of mortars. The compressive strength tests showed that the replacement of MK by SSA in 10 wt% when cured at 25 degrees C with the highest SiO2/Na2O molar ratio reaches similar compressive strengths after 14 days of curing compared to the samples with only MK, which reached a maximum compressive strength of 50.8 MPa at 180 days. The FTIR analyses carried out in the geopolymer pastes with SSA (10 wt% of SSA and 90 wt% of MK) showed a formation of N-A-S-H gels in the samples cured at 25 degrees C. The microstructural studies by XRD, TGA and SEM pointed out the formation of a crystalline phase as Na P-type zeolite in MK/SSA based-geopolymer pastes cured at 65 degrees C, which explained the loss of compressive strength of the samples cured at high temperature. However, the SSA retarded the crystallization process in the MK based-geopolymer. (C) 2019 Elsevier Ltd. All rights reserved., This research has been supported by funding agency Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) and Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) (processo n° 309015/2015-4).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A 100% waste-based alkali-activated material by using olive-stone biomass ash (OBA) and blast furnace slag (BFS)

  • Font-Pérez, Alba
  • Moraes, J.C.B
  • Tashima, M.M.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] This study presents the use of olive-stone biomass ash (OBA) as an alkali source in alkali-activated materials (AAM) based on blast furnace slag (BFS). The OBA was physically and chemically characterized. It presented high K2O and CaO contents, and yielded high alkalinity in water medium. The newly designed OBA + BFS mixes (a 100% waste-based AAM) reached a compressive strength of 30 MPa after 7 days of curing at 65 ºC, which was higher than for BFS activated with KOH solution. Thermogravimetric studies showed the formation of C-S-H/(C,K)-A-S-H gels and hydrotalcite. The OBA presented excellent performance as a component in AAM and a good valorisation was achieved
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New use of sugar cane straw ash in alkali-activated materials: a silica source for the prparation of alkaline activator

  • Moraes, J.C.B
  • Font-Pérez, Alba
  • Akasaki, J.L.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Alkali silicates, expensive and highly pollutant chemical reagents, are required to produce the alkaline activator for high-performance alkali-activated materials. This study presents a new silica source for producing the alkaline activator, sugar cane straw ash (SCSA). An activating suspension was prepared with SCSA and NaOH by means of a thermal bottle. The ash reacting time inside the thermal bottle (s) was assessed from 0 to 48 h, and the SCSA amount in suspension, represented by the SiO2/Na2O ratio (e), was analysed from 0 to 1.82. Compressive strengths were obtained from blast-furnace slag-based mortars that were cured for three days at 65 C, with the optimal mortars produced when s = 24 h and e = 1.46. Comparison of these new SCSA systems with two common silica sources, sodium silicate chemical reagent and rice husk ash, revealed that SCSA yielded lower results than the former and similar results to the latter silica source., The authors would like to thank CNPq processo no 401724/2013-1 and CNPq processo no 140779/2015-0. The authors would also like to thank the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainable soil-compacted blocks containing blast furnace slag (BFS) activated with olive stone biomass ash (OBA)

  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Rosello Caselles, Josefa|||0000-0003-2642-4285
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Font-Pérez, Alba
[EN] Soil stabilization using cementing materials is a well-known procedure for earth-based building blocks preparation. For the selected binding materials, innovation usually focuses on low carbon systems, many of which are based on alkaline activation. In the present paper, blast furnace slag (BFS) is used as a mineral precursor, and the innovative alkali activator was olive stone biomass ash (OBA). This means that the most important component in CO2 emissions terms, which is the alkali activator, has been replaced with a greener alternative: OBA. The OBA/BFS mixture was used to prepare compacted dolomitic soil blocks. These specimens were mechanically characterized by compression, and water strength coefficient and water absorption were assessed. The microstructure of blocks and the formation of cementing hydrates were analyzed by field emission scanning electron microscopy and thermogravimetry, respectively. The final compressive strength of the 120-day cured blocks was 27.8 MPa. It was concluded that OBA is a sustainable alkali activator alternative for producing BFS-stabilized soil-compacted blocks: CO2 emissions were 3.3 kgCO(2)/ton of stabilized soil, which is 96% less than that for ordinary Portland cement (OPC) stabilization., This research was funded by the Spanish Government and FEDER funds (MINECO/FEDER-Project RTI2018-09612-B-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

One-part blast furnace slag mortars activated with almond-shell biomass ash (ABA): A new 100% waste-based material

  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Font-Pérez, Alba
[EN] The use of almond-shell biomass ash (ABA) as an alkali source in one-part blast furnace slag (BFS) mortars activation was investigated for the first time. The chemical composition of ABA revealed high alkalinity ash to be composed mainly of K2O and CaO. The one-part 100% waste-based mortars and pastes were studied by mechanical and thermogravimetric tests. The compressive strength values of the newly designed materials were higher than the mortars fabricated with commercial products (36.4 versus 21.2 MPa). The formation of C-S-H/(C,K)-A-S-H gels took place in the thermogravimetric studies. The use of ABA in mortars proved an interesting alternative to chemical reagents in alkali activated cements., We wish to thank Borges Agricultural & Industrial Nuts for supplying ash and the Electronic Microscopy Service at the UPV. This research was supported by Spanish governerment MINECO/FEDER (Project RTI2018-097612-B-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of Addition of Fluid Catalytic Cracking Residue (FCC) and the SiO2 Concentration in Alkali-Activated Ceramic Sanitary-Ware (CSW) Binders

  • Cosa-Martínez, Juan
  • Reig, L.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
[EN] Production of Portland cement requires a large volume of natural raw materials and releases huge amounts of CO2 to the atmosphere. Lower environmental impact alternatives focus on alkali-activated cements. In this paper, fluid catalytic cracking residue (FCC) was used to partially replace (0 wt %¿50 wt %) ceramic sanitaryware (CSW) in alkali-activated systems. Samples were activated with NaOH and sodium silicate solutions and were cured at 65 °C for 7 days and at 20 °C for 28 and 90 days. In order to increase CSW/FCC binders¿ sustainability, the influence of reducing the silica concentration (from 7.28 mol·kg¿1 up to 2.91 mol·kg¿1) was analyzed. The microstructure of the developed binders was investigated in pastes by X-ray diffraction, thermo tests and field emission scanning electron microscopy analyses. Compressive strength evolution was assessed in mortars. The results showed a synergetic effect of the CSW/FCC combinations so that, under the studied conditions, mechanical properties significantly improved when combining both waste materials (up to 70 MPa were achieved in the mortars containing 50 wt % FCC cured at room temperature for 90 days). Addition of FCC allowed CSW to be activated at room temperature, which significantly broadens the field of applications of alkali-activated CSW binders., The authors would like to thank the Spanish Ministry of Science and Innovation for supporting this research through Project APLIGEO BIA2015-70107-R, FEDER funds and the companies Ideal Standard and Omya Clariana S.A., for supplying the raw CSW and FCC materials respectively. We also wish to thank the electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards the valorization of Cumbre Vieja volcanic ash - Production of alternative cements

  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] One of the most critical issues after a volcanic eruption is managing damaged infrastructure and human health. This study aims to promote the valorization of non-weathered volcanic ash (VA) from the Cumbre Vieja volcano (La Palma Island ¿ Spain) in the production of alternative cements. A detailed study related to the characterization of VA was performed, and its use in the production of alkali-activated cements is proposed. Promising results, achieving about 80 MPa in compression, indicated that using a cementing material based on VA could be a fascinating solution for the VA valorization and the reconstruction of the affected infrastructure of La Palma Island, especially in producing prefabricated elements., Thanks are given to the Government Presidency of the Canary Islands, the Spanish Military Emergency Unit (UME), and the General Directorate for Coordination of Action of the Generalitat Valenciana Government. Also, to the Electron Microscopy Service of the Universitat Politecnica de Val`encia and Sonia Cortes from Ediciones Fruit Today, S. L. to provide photos of the Cumbre Vieja volcano and affected zones (Figure b and suppl. Figure). Finally, M.M. Tashima wishes to thank the Spanish Ministry of Universities and the Universitat Politecnica de Valencia for the grant "Maria Zambrano for attraction of international talent", funded by European Union-Next Generation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and properties of 100% waste-based ternary alkali-activated mortars: blastfurnace slag, olive-stone biomass ash and rice husk ash

  • Font-Pérez, Alba
  • Pinheiro, Sayonara Maria de Moraes
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Alkali-activated cements (AACs) technology is being widely investigated as a replacement for ordinary Portland cement (OPC) for environmental benefits. Blast furnace slag (BFS) is one of the most well known precursors used in AACs, having comparable properties to those of traditional OPC-based materials. AACs require alkali solutions, which are commonly based on a combination of sodium or potassium hydroxides with sodium or potassium silicates in high concentration. These alkali solutions represent the use of chemical reagents, and thus can have major environmental, health and economic impacts. Olive-stone (also known as olive pits) biomass ash (OBA) is a residue mainly composed of calcium and potassium oxides. Rice husk ash (RHA) is a rich silica residue from the combustion of rice husk. The combination of both residues can produce a good activating reagent for BFS-based AACs. In the present work, 100% waste-based ternary alkali-activated mortars (TAAM) based on BFS activated by OBA and RHA were developed. The mortars were assessed in terms of their dosage, curing treatment and time evolution. Finally an eco-friendly 100% waste-based TAAM with 67.39 +/- 0.44 MPa after 90 days of curing at 20 degrees C is obtained and a complete microstructural characterization shows a dense and compact matrix with binding gel products labelled as C(K)-S(A)-H and C(K)-S-H.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Almond-shell biomass ash (ABA): a greener alternative to the use of commercial alkaline reagents in alkali-activated cement

  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Font, Alba
  • Bonifacio, Thais
[EN] The use of almond-shell biomass ash (ABA) as an alternative component to the commercial reagents used in the activation of blast furnace slag (BFS) systems is investigated. The presence in its chemical composition of a high content of K2O indicate s that it can alkalinize the medium. 100% waste-based mixtures ABA/BFS were studied by micro- and macrostructural tests. A compressive strength of 44 MPa was achieved by the mortar with 25% ABA addition cured for 7 days at 65 °C. The microstructural analysis showed the formation of slightly different C(K)-A-S-H gels to those formed when using KOH. The use of ABA in BFS mortars is shown as a greener alternative for onstruction materials because the replace- ment of synthetic chemical reagents that produced around a 75¿80% of reduction in the values of kgCO2eq/m3 material, We wish to thank the Spanish Government for project support (MINECO/FEDER-Project RTI2018-09612-B-C21). The authors would like to thank Borges Agricultural & Industrial Nuts for supplying the biomass ash and the Electronic Microscopy Service at the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of dissolved rice husk ash in the development of binary blast furnace slag-sewage sludge ash alkali-activated mortars

  • Istuque, Danilo Bordan
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
[EN] This study evaluated the compressive strength performance and microstructure of binary blast furnace slag-sewage sludge ash (BFS-SSA) alkali-activated mortars, in which rice husk ash (RHA) was dissolved in NaOH solution to replace commercial sodium silicate. The dissolution of RHA, performed in a thermal bottle with NaOH solution, enhanced the compressive strength of the alkali-activated mortars based on BFS up to 4.5-fold. BFS-SSA based mortars (10¿40% SSA), activated with NaOH/RHA-based sodium silicate suspensions, reached a compressive strength up to 30 MPa after 28 curing days at 20¿C. The RHA dissolution enhanced the strength and sustainability of the BFS-SSA alkali-activated mortars., This study was financed partly by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brazil (CAPES) - (Finance Code 001). Thanks go to Cementval, the DACSA Group and the Pinedo Wastewater Treatment Plant for supplying some raw materials. Thanks go to the Electron Microscopy Service of the Universitat Politècnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Resistance to acid attack of alkali-activated binders: Simple new techniques to measure susceptibility

  • Mellado Romero, Ana María|||0000-0002-2105-154X
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Martha Iris Pérez-Ramos
[EN] Two rapid tests were developed to evaluate the resistance to acid attack by ordinary Portland cement (OPC) and alkali-activated pastes. Acid neutralisation capacity (ANC) at pH 7, 4 and 2 was monitored with powdered pastes. In parallel, a `combined-pH assay¿ with a single sample was used to sequentially assess ANC at different pH values. A mass loss/consumed acid monitoring technique has been also developed in order to assess monolithic samples. The OPC paste showed the most degradation. Among the alkaliactivated pastes, those with the lowest calcium content (fly ash and spent-FCC catalyst) had the best performance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Olive-stone biomass ash (OBA): an alternative alkaline source for the blast furnace slag activation

  • Pinheiro, S.M.M.
  • Font-Pérez, Alba
  • Soriano Martinez, Lourdes
  • Tashima, M.M.
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Alkali activated materials (AAM) are being investigated as an alternative binder that could be more eco-efficient than Portland cement. The effect of olive-stone biomass ash (OBA) on the activation of blast furnace slag (BFS) was studied. The mechanical behaviour of mortars in which OBA was replaced, or added to, BFS were compared to those found for BFS mortars activated with potassium hydroxide (KOH) and sodium hydroxide (NaOH) solutions in the range of 4¿12 molkg-1 . The results showed the high efficiency of OBA as activating reagent because it provided similar, or higher, strengths when compared to the alkali hydroxide activating solutions. The microstructural characteristics of the new binding OBA/BFS systems were assessed by X-ray diffraction (XRD), thermogravimetric analysis (TGA),field emission scanning electron microscopy (FESEM) and mercury intrusion porosimetry (MIP). These systems showed lower mean pore diameter and scarcer formation of zeolite structures when compared to KOH/BFS systems. These promising results demonstrated the viability of the use of these type of ashes as activating reagents in AAM., The authors are grateful to CAPES for the scholarship. Thanks are also given to Electron Microscopy Service of the Universitat Politecnica de Valencia, the GeocelPlus-UPV project and Almazara Candela - Elche, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Utilización de mezclas de residuos para la obtención de cementos de activación alcalina: aplicación en morteros y suelos estabilizados

  • Cosa Martínez, Juan
[ES] Esta tesis englobada dentro del programa de doctorado en ingeniería de la construcción sigue la línea de investigación en sostenibilidad y gestión de la construcción. Las investigaciones se han centrado en el desarrollo de cementos de activación alcalina (CAA) obtenidos a partir de residuos con el fin de reducir tanto el coste económico como medioambiental. Este hecho implicaría la reducción en el uso tanto de materias primas, en el caso de los precursores, como de reactivos químicos en el caso de los activadores. La tesis doctoral que se presenta estudia el uso de diferentes mezclas de residuos como precursores: cerámica sanitaria, catalizador gastado de craqueo catalítico, escoria de alto horno y ceniza volante de central térmica en la preparación de morteros. Así mismo, utiliza también CAA, obtenidos a partir de residuos en la estabilización de suelos. En este último caso también se han usado residuos en la preparación de activadores como son las cenizas obtenidas en la combustión de biomasa. Los resultados obtenidos ponen de manifiesto la viabilidad en el uso de residuos para la preparación de CAA, y la posibilidad incluso de ser usados en contextos de subdesarrollo., [CA] Aquesta tesi englobada dins del programa de doctorat en enginyeria de la construcció segueix la línia d'investigació en sostenibilitat i gestió de la construcció. Les investigacions s'han centrat en el desenvolupament de ciments d'activació alcalina (CAA) obtinguts a partir de residus amb la finalitat de reduir tant el cost econòmic com mediambiental. Aquest fet implicaria la reducció en l'ús tant de matèries primeres, en el cas dels precursors, com de reactius químics en el cas dels activadors. La tesi doctoral que es presenta estudia l'ús de diferents mescles de residus com a precursors: ceràmica sanitària, catalitzador gastat de craqueig catalític, escòria d'alt forn i cendra volant de central tèrmica en la preparació de morters. Així mateix, utilitza també CAA, obtinguts a partir de residus en l'estabilització de sòls. En aquest últim cas també s'han usat residus en la preparació d'activadors com són les cendres obtingudes en la combustió de biomassa. Els resultats obtinguts posen de manifest la viabilitat en l'ús de residus per a la preparació de CAA, i la possibilitat de ser usats fins i tot en contextos de subdesenvolupament., [EN] This doctoral thesis encompassed within the doctoral program in construction engineering follows the research line in sustainability and construction management. The research has focused on the development of alkaline activated cements (AAC) obtained from waste to reduce the economic and environmental cost. This fact would imply a reduction in the use of raw materials in the case of precursors, and chemical reagents in the case of activators. The doctoral thesis that is presented studies the use of different waste mixtures as precursors: sanitary ceramics, spent fluid cracking catalyst, blast furnace slag and fly ash from thermal power plants in the preparation of mortars. Likewise, also is used CAA obtained from residues in soil stabilization. In the latter case, residues have also been used in the activators preparation, such as the ashes obtained in the combustion of biomass. The results obtained show the viability in the use of residues for CAA preparation, and the possibility of being used even in underdeveloped contexts., Agradecer al Ministerio de Ciencia e Innovación por el soporte a mi investigación, mediante los fondos del proyecto APLIGEO BIA2015-70107-R y los fondos FEDER. También a las empresas: Ideal Standard por suministrar residuos de cerámica sanitaria, Omya Clariana S.A. por suministrar catalizador gastado del craqueo catalítico, a Balalva S.L. por suministrar cenizas volantes, a Cementval por suministrar escorias de alto horno, a Heineken España S.A. por el suministro de residuo del filtrado de cerveza (tierras diatomeas), a DACSA GROUP por la ceniza de cáscara de arroz, y a PAVASAL por suministrar suelo de tipo dolomítico. Támbien al servicio de Microscopía electrónica y al Instituto de Ciencia y Técnología del Hormigón de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Construction System for Single-Family Homes using Load Bearing Straw Bale Walls Quivillungo Community, Bolivar, Ecuador

  • Viera, Paulina
  • Pachala, Jose
  • Rosero, Hernan
  • Caiza, Pablo
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
[EN] This study begins by describing how our team chose an area in the Ecuadorian Andean Region where a prototype single-family home using load bearing straw-bale-walls could be successfully built. The criteria used in this search were based on results from geographic information systems. The next section describes the design and manufacture of a baler machine which is essential to the feasibility of the strawbale home construction procedure. The study then goes on to explain the features of the most important elements of the single-family home structure: fmmdations, straw walls, wall crovVns, roof and structural plaster. The prototype home was built in accordance with existing standards from other cmmtries, taking into account the high seismic hazard of the geographic region and applying the specific capacities of the Quivilllmgo community. The construction was valídated using analytic models that show the existence of relatively low stresses and deformations and highlíght the structural importance of the plaster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Valorization of sugarcane bagasse ash (SCBA) with high quartz content as pozzolanic material in portland cement mixtures

  • Pereira, A.M.
  • Moraes, J.C.B
  • Bassan de Moraes, M.J.B.
  • Akasaki, J.L.
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Portland cement (OPC) production is one of the most contaminating greenhouse gas producing activities. In order to reduce OPC consumption, several alternatives are being assessed, and the use of pozzolanic material is one of them. This paper presents study on the reactivity of sugarcane bagasse ash (SCBA), a residue from sugarcane industry, as a pozzolanic material. In order to evaluate SCBA reactivity, it was mixed in pastes with hydrated lime and OPC, which were microstructurally characterised. These studies showed that SCBA presents some pozzolanic characteristics. Studies on mortars in which OPC was replaced by SCBA in the range 10¿30% were also carried out. Replacement in the range 15¿20% yielded the best behaviour in terms of compressive strength. Finally, it can be concluded this ash could be valorised despite its relative low pozzolanic reactivity., [ES] Valorización de la ceniza de bagazo de azúcar (SCBA) con alto contenido de cuarzo como material puzolánico en mezclas de cemento Portland. La producción de cemento Portland (OPC) presenta una elevada emisión de CO2. Con el objeto de reducir el consumo de OPC, se están evaluando algunas alternativas, y el uso de materiales puzolánicos es una de ellas. En este trabajo se presenta el estudio de la reactividad de la ceniza de bagazo de caña de azúcar (SCBA) como material puzolánico, un residuo procedente de la industria de la caña de azúcar. Al objeto de evaluar la reactividad de SCBA, se realizaron pastas con cal hidratada y con OPC, las cuales fueron caracterizadas microestructuralmente. Estos estudios mostraron que SCBA presenta una cierta característica puzolánica. Se llevaron a cabo estudios en morteros en los que OPC se sustituyó por SCBA en el intervalo de 10-30%. La sustitución en el intervalo 15-20% produjo el mejor comportamiento en términos de resistencia a compresión. Finalmente, se puede concluir que esta ceniza puede ser valorizada a pesar de su baja reactividad puzolánica., The authors would like to thank the Ministerio de Educacion, Cultura y Deporte of Spain (Cooperacion Interuniversitaria Program with Brazil, Project PHB-2011-0016-PC), CAPES-Brazil (Project CAPES/DGU No. 266/12), CNPq (Project 401724/2013-1) and Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compressive strength and microstructure of alkali-activated mortars with high ceramic waste content

  • Reig, L.
  • Sanz, M.A.
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] The present work investigated alkali-activated mortars with high ceramic waste contents. Tile ceramic waste (TCW) was used as both a recycled aggregate (TCWA) and a precursor (TCWP) to obtain a binding matrix by the alkali-activation process. Mortars with natural siliceous (quartz) and calcareous (limestone) aggregates, and with other ceramic waste materials (red clay brick RCB and ceramic sanitaryware CSW waste), were also prepared for comparison purposes. Given the lower density and higher water absorption values of the ceramic aggregates, compared to the natural ones, it was necessary to adapt the preparation process of the recycled mortars by presaturating the aggregate with water before mixing with the TCWP alkali-activated paste. Aggregate type considerably determined the mechanical behaviour of the samples cured at 65 °C for 3 days. The mortars prepared with the siliceous aggregate presented poor mechanical properties, even when cured at 65 °C. The behaviour of the limestone aggregate mortars depended heavily on the applied curing temperature and, although they presented the best mechanical properties of all those cured at room temperature, their compressive strength reached a maximum when cured at 65 °C, and then decreased. The mechanical properties of the mortars prepared with TCWA progressively increased with curing time (53 MPa at 65 °C for 28 days). An optimum 50 wt% proportion was observed for the limestone/TCWA mortars (¿43 MPa, 3 days at 65 °C), whereas the mechanical properties of that prepared with siliceous particles (10 MPa) progressively increased with the TCWA content, up to 100 wt% substitution (23 MPa). Limestone particles interacted with the binding matrix, and played an interesting beneficial role at the 20 °C curing temperature, with a slight reduction when cured long term (28 days) at 65 °C. The results demonstrated a potential added value for these ceramic waste materials., The authors would like to thank the Spanish Ministry of Science and Innovation and the Spanish Ministry of Economy and Competitiveness for supporting this study through Projects GEOCEDEM BIA 2011-26947 and BIA2015 70107-R, respectively. They also thank FEDER funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Environmental assessment of alkali-activated materials based on agro-industrial waste as alkaline activators through leaching tests

  • Salas, Iván
  • Cifrian, Eva
  • Andrés, Ana
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
[EN] Global circular economy drives the development of sustainable alkali activated materials (AAM) for use as construction material from industrial by-products and wastes. The assessment of the potentially hazardous substances release of these new material combinations into the soil and groundwater over time is essential. In this study, the aim is the environmental assessment of three AAMs based on blast furnace slag (BFS), activated with almond shell biomass ash (ABA) as potassium source and three solid sources of silica from the agricultural industry, rice husk ash (RHA), spent diatomaceous earth (SDE) and bamboo leaf ash (BLA), using European horizontal leaching tests proposed for construction materials, for monolithic form, Dynamic Surface Leaching Test (DSLT) and for granular form, Up-flow Percolation Test and the Compliance leaching test, by simulating different scenarios of their entire life cycle. The leaching results of the AAM showed the effectiveness of the inertization of all the recycled materials studied, which exceeded some inert materials limits, by means of the activation process. Despite the absence of significant differences in the leaching mechanisms of the oxyanions As, Cr, Mo, Sb, Se and V between the three AAMs developed, they presented different long-term leaching behavior depending on their form, monolithic, or granular, and therefore in their different life cycle stages. Therefore, it is concluded that although the incorporation of agro-industrial waste as alternative activators in BFS based AAM according to the Dutch Soil Quality Decree (for unrestricted use of monolithic and granular materials) is an environmentally acceptable option, the design of waste derived AAMs should be assessed by means of a combination of leaching tests that cover their expected life cycle., This work was financially supported by the grants RTI-2018-097612-B-C21 and RTI2018-097612-B-C22, funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe".