Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Chemistry of the interaction between an alkoxysilane-based impregnation treatment and cementitious phases

  • Garcia-Lodeiro, Inés
  • Carmona-Quiroga, P.M.
  • Zarzuela Sánchez, Rafael
  • Mosquera Díaz, María Jesús
  • Blanco-Varela, María Teresa
Chemical compatibility with a wide range of materials is among the features that has driven the use of alkox- ysilanes as consolidants in built structures. Such compatibility is particularly important in cementitious materials where the reaction with portlandite may generate C-S-H gel, one of the main hydration phases of OPC. The cementitious matrix is a complex system, however, and the reaction of its many phases with alkoxysilanes, while poorly understood, may determine treatment efficacy. This article describes a detailed study of the individual interactions between an oligomeric alkoxysilane-based impregnation treatment previously shown to interact with the portlandite present in cement paste and the cementitious phases generated in ordinary portland cement hydration. The findings show that both portlandite and C-S-H gel interact with the silicon oligomers in the hydrolysed impregnation treatment to generate a C-S-H gel (in the case of portlandite) and a rise in C-S-H gel mean chain length (MCL). Ettringite is also altered in the presence of alkoxysilanes, transforming to gypsum and AH3. Its transformation generates a tetrahedral aluminium that is taken up into a high silicon gel sourced from the treatment to form an amorphous aluminosilicate gel. Monocarboaluminate and katoite also partially decompose in the interaction with the product, whereas gibbsite remains unaffected
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Chemistry of the interaction between an alkoxysilane-based impregnation treatment and cementitious phases

  • Garcia-Lodeiro, Inés
  • Carmona-Quiroga, P.M.
  • Zarzuela Sánchez, Rafael
  • Mosquera Díaz, María Jesús
  • Blanco-Varela, María Teresa
Chemical compatibility with a wide range of materials is among the features that has driven the use of alkoxysilanes as consolidants in built structures. Such compatibility is particularly important in cementitious materials where the reaction with portlandite may generate C-S-H gel, one of the main hydration phases of OPC. The cementitious matrix is a complex system, however, and the reaction of its many phases with alkoxysilanes, while poorly understood, may determine treatment efficacy. This article describes a detailed study of the individual interactions between an oligomeric alkoxysilane-based impregnation treatment previously shown to interact with the portlandite present in cement paste and the cementitious phases generated in ordinary portland cement hydration. The findings show that both portlandite and C-S-H gel interact with the silicon oligomers in the hydrolysed impregnation treatment to generate a C-S-H gel (in the case of portlandite) and a rise in C-S-H gel mean chain length (MCL). Ettringite is also altered in the presence of alkoxysilanes, transforming to gypsum and AH(3). Its transformation generates a tetrahedral aluminium that is taken up into a high silicon gel sourced from the treatment to form an amorphous aluminosilicate gel. Monocarboaluminate and katoite also partially decompose in the interaction with the product, whereas gibbsite remains unaffected.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Use of nanosilica- or nanolime-additioned TEOS to consolidate cementitious materials in heritage structures: Physical and mechanical properties of mortars

  • Barberena-Fernández, A. M.
  • Blanco-Varela, María Teresa
  • Carmona-Quiroga, Paula
Tetraethoxysilane or tetraethyl orthosilicate (TEOS), also known as ethyl silicate, traditionally applied to consolidate stone, has recently begun to be used on Portland cement mortars and concrete with promising results. TEOS not only fills the pores in the substrate, but reacts with the cement favouring the precipitation of new C-S-H gels that densify and strengthen the materials. This study explored the effectiveness of new TEOS-based treatments bearing nanosilica (NS) or nanolime (NC) and their compatibility with cement materials found in the built heritage, given the participation of the various products in the pozzolanic reactions that may induce additional C-S-H gel. The physical and hydric properties (mechanical strength, porosity, surface gloss and colour, water vapour permeability and low pressure water absorption) of a Portland cement mortar were determined before and after applying the consolidants. Ethyl silicate alone or in conjunction with nanolime (4:1) proved to most effectively raise material strength and improve water repellence while conserving the original colour and gloss., Funding from the Regional Government of Madrid (Geomateriales 2; S2013/MIT-2914) is gratefully acknowledged. Financial support for Dr. Paula M. Carmona-Quiroga was provided by the Spanish Ministry of the Economy and Competitiveness under project BIA2015-73237-JIN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Effect of BaCO3 on cement hydration

  • Carmona-Quiroga, Paula
  • Blanco-Varela, María Teresa
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., Thaumasite is an expansive salt in spite of its low formation puts cement structures such as foundations, tunnels, dams, bridges, etc. at risk. Unfortunately, none of the current commercial sulfate resistant (SR) cements would resist a thaumasite form of sulfate attack. Recent studies have shown the potential of Ba ions (added to cement as BaCO3 additions) to immobilise sulfates from the medium by precipitating a highly stable and insoluble salt, barite (BaSO4) and inhibiting not only the precipitation of ettringite, like conventional SR cements, but also thaumasite. However, current knowledge on the cement hydration reactions of these OPC-BaCO3 cement blends is still limited. This study aims to gain knowledge on the role of BaCO3 (15 and 25% wt.) on the hydration of Portland cement pastes at 2, 7 and 28 days, when sulfate content in dissolution is limited to gypsum content, by combining XRD, calorimetry and TG-DTA analysis and porosimetric determinations. Results have revealed that in spite of BaCO3 low dissolution rate, BaSO4 was able to precipitate after 2 days of hydration. Isothermal conduction calorimetry studies have shown that BaCO3 alters the hydration of OPC by delaying initial cement hydration reactions and then increasing the total heat that was liberated for 7 days. Evidences of this increase of cement hydration rate of BaCO3-bearing cements were also observed through porosimetric determinations that revealed blends were more effective than OPC in the refinement of the pore structure over time., This research was funded by the Spanish Ministry Science, Innovation and Universities (former Spanish Ministry of the Economy and Competitiveness) under project BIA2015-73237-JIN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Role of ternesite on the hydration of C3A in the presence and absence of gypsum

  • Montes, Myriam
  • Pato, Esther
  • Carmona-Quiroga, Paula
  • Blanco-Varela, María Teresa
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., In the search for new eco-cements it has been found that ternesite (2C2S·CaSO4), which has traditionally been regarded as a hydraulically inactive phase, can be activated by aluminum hidroxides (AH3) and some calcium aluminates. This research, in particular, studies the role of ternesite on C3A hydration, with and without gypsum. After laboratory synthesis, C3A was blended with ternesite, gypsum and ternesite+gypsum. The early hydration of those blends was monitored with isothermal conduction calorimetry at 25 °C for 7 days. The resulting pastes were analysed with XRD, FTIR and DTA/TG. Additionally, mixtures of C3AH6 and ternesite in water were prepared in order to study their compatibility. The calorimetric results showed a higher total heat per gram of aluminate in the sample containing gypsum and ternesite than in the sample C3A+ternesite. XRD diffractograms and DTG-TG analysis revealed the presence of AFm in all the samples with gypsum but not in C3A+ternesite which shows no evidence of ternesite activation by C3A., Funding from BIA2016-76466-R project as well as the Regional Government of Madrid Community and European Social Fund (Geomaterials Programme2 S2013/MIT-2914) is gratefully acknowledged. Authors thank to Ministerio de Economía y Competitividad the young researcher contract given to Myriam Montes. Financial support for Dr. Paula M. Carmona-Quiroga’s participation was provided by the Spanish Ministry of the Economy and Competitiveness under project BIA2015-73237-JIN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Can calcium aluminates activate ternesite hydration?

  • Montes, Myriam
  • Pato, Esther
  • Carmona-Quiroga, Paula
  • Blanco-Varela, María Teresa
Aluminum hydroxide (AH3) has recently been shown to be able to activate hydration in ternesite, a phase found in some calcium sulfoaluminate (CSA) cements. This study explored the capacity of a number of calcium aluminates (C3A, C12A7, CA and C4A3) to activate ternesite hydraulic reactivity. After laboratory synthesis, the aluminates were blended with ternesite at a ratio of 1:2 and their hydration was monitored with isothermal conduction calorimetry for 7 days at 25 °C. The resulting pastes were analysed with XRD, FTIR and DTA. The presence of ternesite in the pastes altered the aluminate heat flow curves, shortening the induction period and bringing the reaction peak forward, an indication of hastened hydration. Ternesite also altered the reaction products, which included calcium monosulfoaluminate hydrate and strätlingite., This paper has been funded from BIA2016-76466-R project as well as the Regional Government of Madrid Community and European Social Fund (Geomaterials Programme2 S2013/MIT-2914). Authors thank to Ministerio de Economía y Competitividad the young researcher contract given to Myriam Montes. Financial support for Dr. Paula M. Carmona-Quiroga's participation was provided by the Spanish Ministry of the Economy and Competitiveness under project BIA2015-73237-JIN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Resistance to thaumasite sulfate attack in BaCO3-bearing cement pastes and mortars

  • Carmona-Quiroga, Paula
  • Blanco-Varela, María Teresa
Recent studies on the harmful effects of sulfates on OPC have shown that these salts can be immobilised by conversion to insoluble BaSO4. The response of blended OPC-BaCO3 cement to thaumasite sulfate attack is still poorly understood, however. This study explored the effect of BaCO3 on sulfate resistance in fairly high C3A (>10%) OPC mortars and pastes in the presence and absence of CaCO3. Further to the findings, due to low BaCO3 solubility at 8 °C, the temperature that favours thaumasite precipitation, neat OPC sulfate resistance was only slightly improved. Specimens, particularly mortars with 12.5% BaCO3 and no added CaCO3 (12.5B), deteriorated due to gypsum, ettringite and thaumasite precipitation, although less intensely than the samples bearing other blends. None of the BaCO3 or BaCO3 + CaCO3 blends performed better than the commercial sulfate-resistant cement used as the reference., Funding from the Spanish Ministry of the Economy and Competitiveness and the European Regional Development Fund, BIA2015-73237-JIN project (MINECO/ERDF; EU), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Barium carbonate and supplementary cementitious materials to counteract thaumasite sulfate attack in mortars: Effect of aggregate composition

  • Carmona-Quiroga, Paula
  • Blanco-Varela, María Teresa
Supplementary cementitious materials (SCMs) have been shown to have a beneficial impact on carbonate-bearing mortar and concrete resistance to sulfates in general and thaumasite sulfate attack (TSA) in particular, although the effect is limited in some cases. In pursuit of improved sulfate-resistance formulations that inhibit thaumasite formation, this study added barium carbonate, both as mineral addition and as aggregate, to cements blended with SCMs. The aim was to immobilise sulfates via conversion to barite, a practically insoluble form of barium sulfate. The study was conducted on standardised mortars prepared with CEM I 52.5 N-SR 5 (reference, Ref) cement, laboratory-blended CEM III/C-SR (with slag) or CEM IV/B-SR (fly ash-bearing) cements. Mixes were also prepared with the latter two cements in which the slag or fly ash filler was partially replaced with barium carbonate. Barium or calcium carbonate sands were used as aggregate in the respective mortars, all of which were soaked in a NaSO solution at 8 °C for 6 months and monitored for variations in mass, compressive strength, ultrasonic velocity, soundness (expansion) and mineralogy. The findings showed that at such low temperatures the amount of Ba solubilised did not suffice to effectively immobilise the external sulfates in the blends containing SCMs. The fly ash-bearing samples, particularly where the addition was partially replaced with barium carbonate, deteriorated severely or very severely (substantial expansion and mass loss) because thaumasite precipitated even in the presence of the barite formed. The low cement content, slag-bearing blends exhibited greatest sulfate resistance, irrespective of the presence of barium carbonate as addition or aggregate. In mortars made with commercial, low CA content (Ref.) sulfate-resistant cement, barium carbonate sand inhibited gypsum and ettringite formation, whereas both products precipitated in analogous and less porous mixes bearing limestone aggregate., This research was funded by the Spanish Ministry of the Economy and Competitiveness and the European Regional Development Fund (MINECO/ERDF; EU project BIA2015-73237-JIN; Spain). Supply of the OPCs by Grupos Cementos Portland Valderrivas and of the limestone aggregates by Omnya Clariana is gratefully acknowledged. The authors wish to thank Germán García Pérez and Isabel Pajares, respectively, for making the necessary arrangements. The professional support provided by the CSIC’s ‘Open Heritage: Research and Society (PTI-PAIS)’ Interdisciplinary Theme Platform is also gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of BaCO3 reactivity and mixing procedure on sulfate-resistant cement performance

  • Carmona-Quiroga, Paula
  • Mota-Heredia, Carlos
  • Torres-Carrasco, Manuel
  • Fernández, José F.
  • Blanco-Varela, María Teresa
The present study focuses on exploring the effects of reactivity and degree of dispersion of BaCO additions in the manufacture of sulfate-resistant OPC cements. A new electrochemical deposition method is attempted to effectively disperse BaCO particles (studying two different materials with particle size: D = 11.45 and 2.37 μm) on cement to enhance their reactivity and favour sulfate immobilisation in the form of BaSO. The barium carbonate additions, particularly the finest, activate cement hydration to a greater extent. Electrodeposition is also observed to improve early age reactivity (2 d–7 d) in fine BaCO. Cement paste bearing 15 wt % BaCO is more resistant to sulfate attack by a 5% (w/v) solution of NaSO (180 d at 23 °C) than a commercial sulfate-resistant cement, although secondary ettringite and gypsum precipitated in all cases., This study was funded by the Spanish Ministry of the Economy and Competitiveness and the European Regional Development Fund, BIA2015-73237-JIN project (MINECO/ERDF; EU) and MAT2017- 86450-C4-1-R. The authors wish to thank Grupos Cementos Portland Valderrivas and in particular Germ´an García P´erez for the supply of the OPCs used.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemistry of the interaction between an alkoxysilane-based impregnation treatment and cementitious phases

  • García-Lodeiro, Inés
  • Carmona-Quiroga, Paula
  • Zarzuela, Rafael
  • Mosquera, Maria Jesus
  • Blanco-Varela, María Teresa
Chemical compatibility with a wide range of materials is among the features that has driven the use of alkoxysilanes as consolidants in built structures. Such compatibility is particularly important in cementitious materials where the reaction with portlandite may generate C-S-H gel, one of the main hydration phases of OPC. The cementitious matrix is a complex system, however, and the reaction of its many phases with alkoxysilanes, while poorly understood, may determine treatment efficacy. This article describes a detailed study of the individual interactions between an oligomeric alkoxysilane-based impregnation treatment previously shown to interact with the portlandite present in cement paste and the cementitious phases generated in ordinary portland cement hydration. The findings show that both portlandite and C-S-H gel interact with the silicon oligomers in the hydrolysed impregnation treatment to generate a C-S-H gel (in the case of portlandite) and a rise in C-S-H gel mean chain length (MCL). Ettringite is also altered in the presence of alkoxysilanes, transforming to gypsum and AH. Its transformation generates a tetrahedral aluminium that is taken up into a high silicon gel sourced from the treatment to form an amorphous aluminosilicate gel. Monocarboaluminate and katoite also partially decompose in the interaction with the product, whereas gibbsite remains unaffected., This research was funded by the European Union’s Horizon 2020 - Research and Innovation Framework Programme under grant no. 760858 (Innovaconcrete project), by the Regional Government of Madrid (TopHeritage-CM; S2018/NMT_4372) and by the Spanish Gov- ernment/FEDER-EU under research project MAT2017-84228-R. Dr. Paula M. Carmona-Quiroga’s participation was supported by the Span- ish Ministry of Economy and Competitiveness and the European Regional Development Fund under project BIA2015-73237-JIN (MINECO/ERDF; EU). Authors thank the support of the PTI-PAIS plat- form, Peer reviewed