Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new well-balanced non-oscillatory central scheme for the shallow water equations on rectangular meshes

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
This paper is concerned with the development of high-order well-balanced central schemes to solve the shallow water equations in two spatial dimensions. A Runge Kutta scheme is applied for time discretization. A Gaussian quadrature rule is used to evaluate time integrals and a three-degree polynomial which calculates point-values or flux values. A new procedure has been defined to evaluate the flux integrals and to approach the 2D source term integrals in order to verify the exact C-property, using the water surface elevation instead of the water depth as a variable. Numerical experiments have confirmed the high-resolution properties of our numerical scheme in 2D test problems., This work was partially funded by the "Programa de Apoyo a la Investigacion y Desarrollo" (PAID-06-10) and (PAID-05-12) of the Universidad Politecnica de Valencia. Angel Balaguer-Beser thanks the support of the Spanish Ministry of Education and Science in the framework of the Projects CGL2009-14220-C02-01 and CGL2010-19591. The authors express their gratitude to the anonymous reviewers for their helpful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automatic extraction of shorelines from Landsat TM and ETM+ multi-temporal images with subpixel precision

  • Pardo Pascual, Josep Eliseu|||0000-0003-0471-9795
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Palomar-Vázquez, Jesús|||0000-0001-5438-8950
  • Almonacid Caballer, Jaime
A high precision geometric method for automated shoreline detection from Landsat TM and ETM+ imagery is presented. The methodology is based on the application of an algorithm that ensures accurate image geometric registration and the use of a new algorithm for sub-pixel shoreline extraction, both at the sub-pixel level. The analysis of the initial errors shows the influence that differences in reflectance of land cover types have over shoreline detection, allowing us to create a model to substantially reduce these errors. Three correction models were defined according to the type of gain used in the acquisition of the original Landsat images. Error assessment tests were applied on three artificially stabilised coastal segments that have a constant and well-defined land-water boundary. A testing set of 45 images (28 TM, 10 ETM high-gain and 7 ETM low-gain) was used. The mean error obtained in shoreline location ranges from 1.22 to 1.63. m, and the RMSE from 4.69 to 5.47. m. Since the errors follow a normal distribution, then the maximum error at a given probability can be estimated. The results confirm that the use of Landsat imagery for detection of instantaneous coastlines yields accuracy comparable to high-resolution techniques, showing the potential of Landsat TM and ETM images in those applications where the instantaneous lines are a good geomorphological descriptor. © 2012 Elsevier Inc., The authors appreciate the financial support provided by the Spanish Ministerio de Ciencia e Innovacion and the Spanish Plan E in the framework of the Projects CGL2009-14220-C02-01 and CGL2010-19591.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A well-balanced high-resolution shape-preserving central scheme to solve one-dimensional sediment transport equations

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
[EN] We present a well-balanced high-resolution non-oscillatory central finite volume scheme for solving the shallow water equations with a non-flat bottom topology. Time integration is obtained following a Runge¿Kutta procedure, coupled with its natural continuous extension. We use a central scheme with a point value reconstruction algorithm based on average or flux values, which satisfies the monotonicity preserving property. We apply a special treatment for the source term spatial integration, which preserves the time and space accuracy and it results in a well-balanced scheme. Several one-dimensional test cases are used to verify the behaviour and non-oscillatory properties of our scheme., Angel Balaguer thanks the support of the Spanish Ministry of Education and Science in the framework of the Project CGL2009-14220-C02-01. This work was partially funded by the "Programa de Apoyo a la Investigacion y Desarrollo" (PAID-06-10) of the Polytechnic University of Valencia. We express our gratitude to the anonymous reviewers for their helpful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Change detection in periurban areas based on contextual classification

  • Hermosilla Gómez, Txomin
  • Gil Yepes, José Luis
  • Recio Recio, Jorge Abel|||0000-0003-2159-7494
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
This paper presents a methodology for change detection in peri-urban areas using high spatial resolution image and lidar data, founded on object-based image classification and a comparison of the classification results from two epochs. The definition of the objects is based on cadastral boundaries obtained from a geospatial database. An exhaustive set of descriptive features is computed, characterising each object for both epochs regarding spectral, texture, geometrical, and three-dimensional (3D) aspects. In addition, contextual features describing the object at two levels are defined. Internal context features describe the relations between different land cover elements within the object, whereas external context features describe each object considering the common properties of neighbouring objects, usually coinciding in urban areas with an urban block. Both the classification and the change detection process are thoroughly evaluated, and the specific contribution of 3D features to the accuracy of the processes is analysed. The results show that 3D information enables to improve the classification results, remarkably increasing the accuracy values of certain classes, and allowing for an enhanced discrimination of building typologies. Moreover, the change detection efficiency is notably improved by a significant reduction of both commission and omission errors., The authors appreciate the financial support provided by the Spanish Ministerio de Ciencia e Innovacion and FEDER in the framework of the projects CGL2009-14220 and CGL2010-19591/BTE, and by the Spanish Instituto Geografico Nacional.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of channel changes in a Mediterranean ephemeral stream since the early twentieth century. The Rambla de Cervera, eastern Spain

  • Segura Beltran, Francisca
  • Sanchis Ibor, Carles|||0000-0002-8795-2922
An analysis of morphological changes during the last six decades is presented for a 16.5-km reach of the Rambla de Cervera, a Mediterranean ephemeral stream located in eastern Spain. Channel changes were analysed through a range of techniques, specifically the analysis of aerial photographs with geographical information systems (GIS) and comparison of topographic surveys. The gravel channel underwent a general decline over the study period, losing width (68.5%) and surface area (45.7%). Incision ocurred along the entire study reach at an average depth of 3.5 m. Natural and human-induced factors producing contradictory effects are considered responsible for changes in the Rambla de Cervera, This study was funded by the Ministry of Science and Innovation with the project 'Recent environmental changes in fluvial systems: morphological and sedimentary consequences' (CGL2009-14220-C02-02-BTE) and is financed with FEDER funds. Comments from anonymous reviewers greatly improved this manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Distribution of bedrock channel erosion. Micro and mesoforms in fluviokarstic canyons, Distribución de la erosión en cauces excavados en roca madre: micro y mesoformas en los cañones fl uviocársti cos

  • Sanchis Ibor, Carles
  • Segura, F.
  • Rosselló, V.M.
[EN] This paper examines erosional forms and processes in a calcareous bedrock channel, in the Tambuc rambla (Caroig platf orm, Valencia). The analysis of forms demonstrates the dominance of abrasion, erosion and quarrying over corrosion processes. The incision caused by channel fl ow (forming flutes, potholes and inner channels) has been more eff ective than other produced by dissoluti on (resulting in kamenitza and rillenkarren). The hydrodynamic processes, which are strongly structurally infl uenced, produce an irregular longitudinal profile with several knickpoints., [ES] En el presente trabajo se analizan las formas y los procesos de erosión del lecho de un meandro de la rambla del Tambuc, encajado en las calizas subtabulares de la plataforma del Caroig (Valencia). El análisis de las formas demuestra el predominio de procesos de abrasión, evorsión y remoción sobre los de corrosión. La incisión producida por el flujo del canal (en forma de surcos, marmitas de gigante y canales interiores) ha sido más efectiva que la generada por procesos de disolución (manifiestos en cuencos y rillenkarren). El dominio de los procesos hidrodinámicos, fuertemente condicionados por la estructura, da como resultado la formación de un perfil longitudinal irregular con numerosas rupturas de pendiente., This work was supported by Research projects CGL2006-11242-C03-02 and CGL2009-14220-C02-02, from Ministerio de Ciencia e Innovación and financed with FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of parcel-based image classification methods for monitoring the activities of the Land Bank of Galicia (Spain)

  • Hermosilla, T.
  • Díaz Manso, J.M.
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Recio Recio, Jorge Abel|||0000-0003-2159-7494
  • Fernández-Sarría, Alfonso|||0000-0001-5533-7661
  • Ferradáns Nogueira, P
[EN] The abandonment of agricultural plots entails a low economic productivity of the land and a higher vulnerability to wildfires and degradation of affected areas. In this sense, the local government of Galicia is promoting new methodologies based on high-resolution images in order to classify the territory in basic and generic land uses. This procedure will be used to control the sustainable management of plots belonging to the Land Bank. This paper presents an application study for maintaining and updating land use/land cover geospatial databases using parcel-oriented classification. The test is performed over two geographic areas of Galicia, in the northwest of Spain. In this region, forest and shrublands in mountain environments are very heterogeneous with many private unproductive plots, some of which are in a high state of abandonment. The dataset is made of high spatial resolution multispectral imagery, cadastral cartography employed to define the image objects (plots), and field samples used to define evaluation and training samples. A set of descriptive features is computed quantifying different properties of the objects, i.e. spectral, texture, structural, and geometrical. Additionally, the effect on the classification and updating processes of the historical land use as a descriptive feature is tested. Three different classification methodologies are analyzed: linear discriminant analysis, decision trees, and support vector machine. The overall accuracies of the classifications obtained are always above 90 % and support vector machine method is proved to provide the best performance. Forest and shrublands areas are especially undefined, so the discrimination between these two classes is low. The results enable to conclude that the use of automatic parcel-oriented classification techniques for updating tasks of land use/land cover geospatial databases, is effective in the areas tested, particularly when broad and well defined classes are required., The authors appreciate the collaboration and support provided by Xunta de Galicia, Sociedade para o Desenvolvemento Comarcal de Galícia, and Banco de Terras de Galicia. The financial support provided by the Spanish Ministerio de Ciencia e Innovación in the framework of the projects CGL2010-19591/BTE and CGL2009-14220 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Six decades of changes in the riparian corridor of a Mediterranean river: A synthetic analysis based on historical data sources

  • Garófano-Gómez, Virginia|||0000-0001-5516-5695
  • Martinez-Capel, Francisco|||0000-0003-4991-0251
  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Segura-Beltrán, Francisca
  • Bertoldi, Walter
  • Gurnell, Ángela
Riparian corridors in semi-arid Mediterranean environments are ecosystems of high biodiversity and complexity. However, they are threatened because of high levels of human intervention. River damming and related flow manipulation is considered as one of the most prominent human impacts on riparian corridors. This study combines historical time series information on river flows and their human manipulation, historical aerial images depicting changes in riparian land cover and ground observations of the species - age composition and morphology of the riparian corridor of a Mediterranean river (the Mijares River, Eastern Spain) over the last 60years. In this sense, we explored how to integrate information from a wide variety of data sources, and we extracted a variety of indices and undertook analyses that identified and summarized spatio-temporal changes in riparian structure and in the driving flow processes. Results revealed an increase in the cover and density of woody vegetation and a decrease in bare sediment areas (essential for recruitment of riparian pioneer species), with a synchronous reduction in the complexity of the riparian corridor of the middle reaches of the Mijares River. These vegetation changes have accompanied a decrease in the magnitude and variability of river flows over the last six decades, with higher severity since dam closure. This study illustrates the effectiveness of combining disparate historical data sources and the effectiveness of processing these sources to extract informative metrics that can improve the understanding and management of riparian systems. © 2012 John Wiley & Sons, Ltd., The authors are grateful to Paula De Lamo (who worked in an early version of this study), Carlos Gonzalez-Hidalgo (who gave us access to the MOPREDAS database) and Alicia Garcia-Arias and Oscar Belmar (for their support in the calculation of confusion matrices and in the flow regime analysis, respectively). We also thank Confederacion Hidrografica del Jucar (Spanish Ministry of Agriculture, Food and Environment) and the professors Juan Marco Segura and Javier Paredes for the hydrological data provided to develop this study. TECNOMA S. A. provided logistic support. Finally, we acknowledge the Universitat Politecnica de Valencia for the two grants of the Support Programme for Research and Development 'Programa de Apoyo a la Investigacion y Desarrollo' (PAID 00-10 and 00-11). This study was partially funded by the Spanish Ministry of Economy and Competitiveness with the projects 'Recent environmental changes in fluvial systems: morphological and sedimentological consequences' (CGL2009-14220-C02-02-BTE) and SCARCE (Consolider-Ingenio 2010 CSD2009-00065). The feedback of two anonymous reviewers has been very helpful and is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

ESTIMACIÓN DE LA VELOCIDAD DEL FLUJO DEL AGUA EN CAUCES EFÍMEROS NO AFORADOS A PARTIR DE DATOS LIDAR Y GPS-RTK

  • Colmenarez López, Gerson Rafael
  • Segura Betrán, Francesca
  • Pardo Pascual, Josep Eliseu|||0000-0003-0471-9795
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Palomar-Vázquez, Jesús|||0000-0001-5438-8950
[ES] La fórmula de Manning es una de las más usadas para calcular la velocidad media del flujo del agua en cauces no aforados. Para aplicarla es necesario medir en campo el radio hidráulico (RH), la pendiente de la lámina de agua (S) y obtener el coeficiente de rugosidad (n) generalmente a través de tablas creadas para este fin. Esto implica una ardua, poco eficiente y subjetiva toma de datos en campo. En este estudio se evalúa la posibilidad de obtener dichos parámetros de forma automatizada, lo que disminuye la subjetividad a la vez que ahorra tiempo al permitir trabajar sobre espacios más amplios. Para lograr estos objetivos, en este trabajo se han utilizado: 1) modelos digitales del terreno generados a partir de datos LiDAR, con una densidad de dos puntos por metro cuadrado y que fueron obtenidos cuando el cauce estaba seco; 2) las cotas de la lámina de agua y el perímetro de mojado del cauce medidas en el campo mediante GPS cuando pasaba agua; 3) medidas de caudal cuando se registró circulación. Con esta información se estimó la velocidad (Ve), que se relacionó con la velocidad media del flujo del agua (Vc), calculada a partir de datos medidos en campo. El coeficiente de determinación entre las dos velocidades fue de 73,52%, lo cual sugiere que la metodología propuesta es útil para obtener la velocidad media del flujo, especialmente en zonas de difícil acceso o en cauces secos., [EN] The Manning formula is one of the most used to calculate the average velocity of water flow in ungauged channels. In order to be applied, it is necessary to measure in field the hydraulic radius (RH), the slope of the water surface (S), and to obtain the roughness coefficient (n), usually through tables created for this purpose. This involves a difficult, inefficient and subjective data collection in the field. This study evaluates the possibility to obtain these parameters in a more efficient manner, reducing the time of the process and allowing to work in larger areas. To achieve these objectives, the data used in this work were: 1) digital terrain models generated from airborne LiDAR data with a density of 2 points/m2, acquired when the channel was dry; 2) the height of the waterline and channel geometry measurements in the field using GPS; 3) Flow measurements. With this information, the velocity (Ve) was estimated and related to the average velocity of water flow (Vc) calculated from data measured in the field. The coefficient of determination between both velocity values was 73.52%, suggesting that the proposed methodology is useful to obtain the average velocity of flow, especially in remote areas or dry riverbeds., Agradecemos la financiación por parte del Ministerio de Ciencia e Innovación y el FEDER, en el marco de los proyectos, CGL2009-14220-C02-02, CGL2009-14220-C02-01 y CGL2010-19591.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessing contextual descriptive features for plot-based classification of urban areas

  • Hermosilla, T.
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Recio Recio, Jorge Abel|||0000-0003-2159-7494
  • Cambra López, María|||0000-0001-6130-9392
A methodology for mapping urban land-use types integrating information from multiple data sources (high spatial resolution imagery, LiDAR data, and cadastral plots) is presented. A large set of complementary descriptive features that allow distinguishing different urban structures (historical, urban, residential, and industrial) is extracted and, after a selection process, a plot-based image classification approach applied, facilitating to directly relate the classification results and the urban descriptive parameters computed to the existent land-use/land-cover units in geospatial databases. The descriptive features are extracted by considering different hierarchical scale levels with semantic meaning in urban environments: buildings, plots, and urban blocks. Plots are characterised by means of image-based (spectral and textural), three-dimensional, and geometrical features. In addition, two groups of contextual features are defined: internal and external. Internal contextual features describe the main land cover types inside the plot (buildings and vegetation). External contextual features describe each object in terms of the properties of the urban block to which it belongs. After the evaluation in an heterogeneous Mediterranean urban area, the land-use classification accuracy values obtained show that the complementary descriptive features proposed improve the characterisation of urban typologies. A progressive introduction of the different groups of descriptive features in the classification tests show how the subsequent addition of internal and external contextual features have a positive effect by increasing the final accuracy of the urban classes considered in this study. © 2012 Elsevier B.V., The authors appreciate the financial support provided by the Spanish Ministry of Science and Innovation and FEDER in the framework of the projects CGL2009-14220 and CGL2010-19591/BTE, and the support of the Spanish Instituto Geografico Nacional (IGN).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Historical Land Use as a Feature for Image Classification

  • Recio Recio, Jorge Abel|||0000-0003-2159-7494
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Fernández-Sarría, Alfonso|||0000-0001-5533-7661
  • Hermosilla, T.
[EN] This paper analyzes the effect of the addition of historical land-use as a descriptive feature in plot-based image classification when updating land-use/land-cover geospatial databases. Several historical databases have been simulated to assess the influence and significance of this feature in the classification. The causes, nature, and evolution of classification errors as the database currency varies are analyzed; and the impact of these errors on change detection during the updating process is evaluated. The results show that the addition of historical land-use information increases the overall accuracy of image classifications. During a database updating process, changes are detected by comparing the historical land-use with the classification results. The main drawback of employing historical land-use as a descriptive feature in image classification for change detection is that the percentage of undetectable errors significantly increases as more accurate is the database information., Acknowledgments The authors appreciate the financial support provided by the Spanish Ministerio de Ciencia e Innovacion and the FEDER in the framework of the Project CGL2009-14220-C02-01. We also thank the Spanish Instituto Geografico Nacional for the support provided to carry out this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of storm impact on sandy beaches of the Gulf of Valencia using Landsat imagery series

  • Pardo Pascual, Josep Eliseu|||0000-0003-0471-9795
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Palomar-Vázquez, Jesús|||0000-0001-5438-8950
  • Almonacid Caballer, Jaime
  • Rodrigo-Alemany, Raül
The impact of storms on sandy beaches and the subsequent recovery process is described from an analysis of the shoreline positions obtained from Landsat 5 TM and Landsat 7 ETM + imagery. Shoreline extraction is based on an algorithm previously proposed by the authors that enables a positioning accuracy of 5 m root mean square error (RMSE). The impact of six storms registered over a period of seven months (between November 2001 and May 2002) and the beach recovery processes until December 2002 across a 100 km segment of the Gulf of Valencia on the Spanish Mediterranean coast were analysed by comparing 12 shoreline positions. The multiple shoreline positions obtained from Landsat images provide very useful information for describing the impact of storms and the recovery process across large segments of microtidal coast. This enables the identification of differences not only in the magnitude of change produced by a particular event but also in the cumulative effect associated with several storm events, and in the study of how the beach recovery process takes place. The results show a high level of spatial variability. Beaches with steep slopes experienced fewer changes than shallow slopes. The existence of well developed foredunes in some areas minimised the reduction in the beach width after the storms. Coastal orientation was another important factor in explaining storm impact and the recovery process. This factor affects not only the way the waves interact with the beaches but also the sediment longshore transport: beach regeneration is slower when the transport of sediments is limited by artificial infrastructures (groins, jetties, ports) or natural sediment traps (headlands). The main limitations of using the proposed methodology to obtain the shoreline position from Landsat images are related to: (i) the precision in the shoreline detection; (ii) the nature of the indicator obtained, that is, the water/land interface; and (iii) the registration instant defined by the image acquisition time. However, the high frequency of the data acquisition and the possibility to cover large coastal areas bring a new perspective that enriches other methods and tools used by coastal scientists., The authors appreciate the financial support provided by the Spanish Ministerio de Ciencia e Innovacion in the framework of the Projects CGL2009-14220-C02-01 and CGL2010-19591. We also thank the Direccion General de Costas in Valencia for making available the data for the tests and analysis. Finally, we would like to thank the useful suggestions provided by the anonymous referees and the assigned editor, which enabled us to improve the quality of this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new reconstruction procedure in central schemes for hyperbolic conservation laws

  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
This paper presents a new point value reconstruction algorithm based on average values or flux values for central Runge-Kutta schemes in the resolution of hyperbolic conservation laws. This reconstruction employs a fourth-order accurate approximation of point values of the solution at the two extrema and at the mid-point of each cell. These point values are modified in order to enforce monotonicity and shape preserving properties. This correction has been applied essentially in the cells close to the maxima and minima of the solution and in these cases, it has been proven that the reconstruction is fourth-order accurate. In the cells with a maximum or minimum of the solution, a correction has also been applied to such point values with the aim of ensuring that the resulting numerical solution has a non-oscillatory behavior. Several standard one- and two-dimensional test cases are used to verify high-order accuracy, non-oscillatory behavior and high-resolution properties for smooth and discontinuous solutions, and also in their componentwise extension to the Euler gas dynamics equations. © 2011 John Wiley & Sons, Ltd., I express my gratitude to the anonymous reviewers for their helpful comments. I thank Txomin Hermosilla for his suggestions. I thank the R & D & I Linguistic Assistance Office, Universidad Politecnica de Valencia (Spain), for translating this paper. This work is supported by Spanish Ministry of Education and Science under grant number CGL2009-14220-C02-01. This work was partially funded by the PAID-06-10 of the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Semivariogram calculation optimization for object-oriented image classification

  • Balaguer-Beser, A.
  • Hermosilla, T.
  • Recio, J.
  • Ruiz, L.A.
[EN] In this paper we propose and evaluate different mathematical parameters extracted from the experimental semivariogram for land use/land cover classification using high-resolution images and cadastral mapping limits for the definition of the objects of analysis. First, we describe the process of calculating the semivariogram from the gray level values in an image object. In order to optimize the computation time we present two pixel selection techniques that preserve the original shape of the semivariogram. Several parameters are then extracted from the semivariogram. Finally, we use various statistical techniques to select the most discriminant parameters. Last section shows the results obtained using aerial digital images of an agricultural area on the Mediterranean coast of Spain. The study of the practical application presented in this paper facilitates the understanding of the relationship between the behaviour of the experimental semivariogram and the variability of the intensity values in a digital image. In order to follow the development of this work, the reader should know some basis of classification methods and digital image processing techniques., [ES] En este trabajo se proponen y evalúan diferentes parámetros matemáticos extraídos del semivariograma experimental para la clasificación de los usos del suelo mediante imágenes de alta resolución, usando los límites catastrales para la definición de los objetos de análisis. En primer lugar, se describe el proceso de cálculo del semivariograma a partir de los valores de niveles de gris del objeto imagen. Con el fin de optimizar el tiempo de cálculo se presentan dos técnicas de selección de píxeles que conservan la forma original del semivariograma. A continuación se definen varios parámetros del semivariograma. Final- mente, se usan diferentes técnicas estadísticas para la selección de los parámetros más discriminantes. La última sección muestra los resultados obtenidos con las imágenes digitales aéreas de una zona agrícola en la costa mediterránea de España. El estudio de la aplicación práctica que se presenta facilita la comprensión de la relación entre el comportamiento del semivariograma experimental y la variabilidad de los valores de intensidad en una imagen digital. Con el fin de seguir el desarrollo de este trabajo, el lector debe conocer algunos métodos estadísticos de clasificación y algunas técnicas de procesamiento digital de imágenes., The authors appreciate the financial support provided by the Spanish Ministry of Science and Innovation and the FEDER in the framework of the Projects CGL2009-14220-C02-01 and CGL2010-19591/BTE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Caracterización de la evolución reciente de las playas de Sagunt y Canet d&apos, En Berenguer a patir de imágenes Landsat

  • Pardo Pascual, Josep Eliseu|||0000-0003-0471-9795
  • Almonacid Caballer, Jaime
  • Mislata Cabo, Rosa María
  • Roselló Soto, Raquel
[ES] Se presenta un análisis de la evolución reciente de la línea de costa de los términos municipales de Sagunt y de Canet d’en Berenguer. La principal novedad es el empleo de imágenes Landsat –con una resolución espacial de 30 m– que tratada con una metodología específica, desarrollada por el equipo de investigación al que pertenecen los autores, permite detectar la posición de la orilla en el momento de la toma de la imagen con una precisión de unos 5 m (error medio cuadrático). Ello permite aprovechar una gran cantidad de imágenes (en este caso 50) entre 1984 y 2009 disponibles de la base de datos del USGS. Se ha calculado la tasa de cambio a lo largo de todo el periodo y, también, en dos subperiodos (1984-2000 y 1999-2009). Los resultados prueban el predominio de la acumulación en la mayor parte de la zona estudiada provocada fundamentalmente por la introducción en 1982 del puerto Siles. Los procesos acumulativos sin embargo fueron singularmente mayores en el primer subperiodo que en el segundo. El estudio de los cambios a lo largo de un mismo año en tres momentos dados ha permitido extraer conclusiones no solo de cómo cambia la anchura de las playas sino también de su morfología (pendiente) y sus características texturales., [EN] This paper presents an analysis of the recent evolution of the shorelines of the municipalities of Sagunt and Canet d’en Berenguer. The main new is the use of Landsat images - with a spatial resolution of 30 m -to deal with a specific methodology developed by the research team they belong to the authors, can detect the position of the shore at the moment the taking of the image with an accuracy of about 5 m (RMSE). This allows take advantage of a large amount of mages (in this case 50) between 1984 and 2009 available from the USGS database. It has been estimated the rate of change over the whole period and also in two sub-periods (1984-2000 and 1999-2009). The results show the dominance of accumulation in most of the study area mainly caused by the introduction in 1982 the port Siles. However cumulative processes were particularly higher in the first sub-period in the second. The study of changes along a year on three occasions has given not only to draw conclusions on how to change the width of beaches but also on their morphology (slope) and textural characteristics., Los autores agradecemos el apoyo económico recibido por el Ministerio de Ciencia e Innovación en el marco de los proyectos CGL2009-14220-C02-01 y CGL2010-19591.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automated extraction of tree and plot-based parameters in citrus orchards from aerial images

  • Recio Recio, Jorge Abel|||0000-0003-2159-7494
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Palomar-Vázquez, Jesús|||0000-0001-5438-8950
  • Hermosilla, T.
A plot-based approach is proposed to detect fruit trees from high spatial resolution aerial images and extract tree and plot-based parameters, such as fraction of tree cover, number of trees, and planting patterns. Each plot image, defined by the boundaries or polygons obtained from a cadastral database, is analyzed independently. The methodology is based on image processing methods: an unsupervised classification with the k-means algorithm is applied, followed by the automatic identification of the classes representing trees. Once extracted, each tree is individualized using a morphological process applied on the binary image of the trees. A set of parameters is calculated at tree and plot levels that produces a comprehensive description of the spectral and morphological aspects of the trees, as well as their spatial distribution in each plot. The methodology was tested on 0.5 m/pixel spatial resolution aerial images of 300 citrus orchard plots which included the three citrus tree typologies found in the Valencia region (Spain). The accuracy of the fruit tree extraction and the parameters calculated was evaluated by comparison with reference data obtained by manual delineation of the images. The automatically extracted fraction of tree cover was significantly related to the reference tree cover area (R2 = 0.96). In the case of the number of detected trees, the R2 values were always higher than 0.90 for the three typologies. Tree location was estimated with an average positional error of 40 cm. The error obtained in the characterization of the planting pattern was less than 50 cm. The proposed methodology may be applied to large agricultural databases, and the derived information combined with precision agricultural techniques could improve the efficiency of various irrigation and agricultural management tasks such as handling per-plot water requirements and distribution., The authors appreciate the financial support provided by the Spanish Ministry of Science and Innovation within the framework of the Projects CGL2009-14220 and CGL2010-19591/BTE, by the Universitat Politecnica de Valencia within the program PAID-06-11, the support of the Spanish Instituto Geografico Nacional (IGN), and the collaboration of the IMIDA and the IVIA through the Telerieg Project (SOE1/P2/E082).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of automatic building detection approaches combining high resolution images and LiDAR data

  • Hermosilla, T.
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Recio Recio, Jorge Abel|||0000-0003-2159-7494
  • Estornell Cremades, Javier|||0000-0003-0854-5358
In this paper, two main approaches for automatic building detection and localization using high spatial resolution imagery and LiDAR data are compared and evaluated: thresholding-based and object-based classification. The thresholding-based approach is founded on the establishment of two threshold values: one refers to the minimum height to be considered as building, defined using the LiDAR data, and the other refers to the presence of vegetation, which is defined according to the spectral response. The other approach follows the standard scheme of object-based image classification: segmentation, feature extraction and selection, and classification, here performed using decision trees. In addition, the effect of the inclusion in the building detection process of contextual relations with the shadows is evaluated. Quality assessment is performed at two different levels: area and object. Area-level evaluates the building delineation performance, whereas object-level assesses the accuracy in the spatial location of individual buildings. The results obtained show a high efficiency of the evaluated methods for building detection techniques, in particular the thresholding-based approach, when the parameters are properly adjusted and adapted to the type of urban landscape considered. © 2011 by the authors., The authors appreciate the financial support provided by the Spanish Ministry of Science and Innovation and FEDER in the framework of the projects CGL2009-14220 and CGL2010-19591/BTE, and the support of the Spanish Instituto Geografico Nacional (IGN).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efectos de una crecida en un cauce antropizado. La riada del Palancia de octubre de 2000, Flood effects on a human-modified channel: The Palancia River flood of October of 2000

  • Segura-Beltrán, Francisca
  • Sanchis Ibor, Carles|||0000-0002-8795-2922
[EN] In October of 2000, the Palància River underwent a major flood, which substantially modified the morphology of the river channel. These changes took place on a river bed previously modified by public works aimed at cleaning and simplifying the river section. The flood partially restored the braided morphology, reconstructing bars and channels. Moreover, river incision processes increased, particularly downstream the Palància bridges. This process reveals a sedimentary deficit caused by reservoirs; land use changes and gravel mining. The aim of this work is to describe these processes of change and to analyze the morphosedimentary consequences, through the interpretation of aerial photographs previous, simultaneous and subsequent to the flood., [ES] El río Palància experimentó, en octubre de 2000, una importante crecida que modificó sustancialmente la morfología del cauce. Esta transformación tuvo lugar sobre un lecho que previamente había sido arrasado por diversas obras de limpieza y regularización de la sección fluvial. La crecida restauró parcialmente la morfología braided del río, construyendo diversas barras y canales. Además, acentuó los procesos de incisión fluvial en el cauce, singularmente intensos en las inmediaciones de los puentes que cruzan el río, Este proceso denota un déficit sedimentario provocado por los cambios de usos del suelo, la extracción de áridos y la retención de sedimentos en los embalses de la cuenca. El presente trabajo, describe estos procesos de cambio y analiza sus implicaciones morfosedimentarias, a partir de la fotointerpretación de imágenes anteriores, simultáneas y posteriores a la crecida., Este artículo ha sido financiado con fondos del proyecto del Ministerio de Educación, Cultura y Deporte, (CGL2009-14220-C02-02-BTE) y cuenta con fondos FEDER
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A feature extraction software tool for agricultural object-based image analysis

  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Recio Recio, Jorge Abel|||0000-0003-2159-7494
  • Fernández-Sarría, Alfonso|||0000-0001-5533-7661
  • Hermosilla, T.
A software application for automatic descriptive feature extraction from image-objects, FETEX 2.0, is presented and described in this paper. The input data include a multispectral high resolution digital image and a vector file in shapefile format containing the polygons or objects, usually extracted from a geospatial database. The design of the available descriptive features or attributes has been mainly focused on the description of agricultural parcels, providing a variety of information: spectral information from the different image bands; textural descriptors of the distribution of the intensity values based on the grey level co-occurrence matrix, the wavelet transform and a factor of edgeness; structural features describing the spatial arrangement of the elements inside the objects, based on the semivariogram curve and the Hough transform; and several descriptors of the object shape. The output file is a table that can be produced in four alternative formats, containing a vector of features for every object processed. This table of numeric values describing the objects from different points of view can be externally used as input data for any classification software. Additionally, several types of graphs and images describing the feature extraction procedure are produced, useful for interpretation and understanding the process. A test of the processing times is included, as well as an application of the program in a real parcel-based classification problem, providing some results and analyzing the applicability, the future improvement of the methodologies, and the use of additional types of data sets. This software is intended to be a dynamic tool, integrating further data and feature extraction algorithms for the progressive improvement of land use/land cover database classification and agricultural database updating processes. © 2011 Elsevier B.V., The authors appreciate the financial support provided by the Spanish Ministerio de Ciencia e Innovacion and the FEDER in the framework of the Project CGL2009-14220 and CGL2010-19591/BTE, the Spanish Institut Geografico Nacional (IGN), Institut Cartografico Valenciano (ICV), Institut Murciano de Investigacion y Desarrollo Agrario y Alimentario (IMIDA) and Banco de Terras de Galicia (Bantegal).