Skip to main content

TRANSFORMACIONES DE FASE VIA SOLVENTE: IMPLICACIONES EN CIENCIAS DE LA TIERRA

CGL2013-47988-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Growth of Gypsum in the Presence of Hexavalent Chromium: A Multiscale Study

  • Morales, Juan
  • Astilleros, José Manuel
  • Matesanz, Emilio
  • Fernández Díaz, Lurdes
The sorption of dissolved inorganic pollutants into the structure of minerals is an important process that controls the mobility and fate of these pollutants in the Earth’s crust. It also modifies the surface structure and composition of the host mineral, affecting its crystallization kinetics. Here, we investigate the effect of hexavalent chromium, Cr(VI), on the nucleation and growth of gypsum by conducting two types of experiments: (i) in situ atomic force microscopy (AFM) observations of the growth of gypsum {010} surfaces in the presence of Cr(VI) and (ii) gypsum precipitation experiments by mixing aqueous solutions containing variable amounts of Cr(VI). Gypsum precipitation is progressively delayed when occurring from solutions bearing increasing Cr(VI) concentrations. Chemical analyses of gypsum precipitates show that gypsum incorporates small Cr(VI) amounts that correlate with the content of this ion in the aqueous solution. Gypsum cell parameters variation reflects this incorporation. At the molecular scale, Cr(VI) induces a slowdown of step advance rates on gypsum {010} surfaces accompanied by the roughening of nanostep edges and the so-called “template effect”. This effect involves the reproduction of the original nanotopography after the completion of individual advancing monolayers and appears as a general nanoscale phenomenon occurring during growth of solid solutions from aqueous solutions even in the case of compositionally-restricted solid solutions., This research was funded by project CGL2013-47988-C2-1-P (Ministerio de Economía y Competitividad; MINECO-Spain). Juan Morales acknowledges an FPI (Formación de Personal Investigador) fellowship from the Spanish Ministry of Science and Innovation. The authors wish to thank the National Centre of Microscopy (ICTS-CNME, UCM), the X-ray Diffraction Central Service and the Geological Techniques Research Centre of the Complutense University of Madrid (UCM) for kindly providing technical support for their research., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reaction pathways and textural aspects of the replacement of anhydrite by calcite at 25 ºC.

  • Roncal-Herrero, Teresa
  • Astilleros, José Manuel
  • Bots, Pieter
  • Rodríguez-Blanco, Juan Diego
  • Prieto, Manuel
  • Benning, Liane G.
  • Fernández Díaz, Lurdes
The replacement of sulfate minerals by calcium carbonate polymorphs (carbonation) has important implications in various geological processes occurring in Earth surface environments. In this paper we report the results of an experimental study of the interaction between anhydrite (100), (010), and (001) surfaces and Na2CO3 aqueous solutions under ambient conditions. Carbonation progress was monitored by glancing incidence X‑ray diffraction (GIXRD) and scanning electron microscopy (SEM). We show that the reaction progresses through the dissolution of anhydrite and the simultaneous growth of calcite. The growth of calcite occurs oriented on the three anhydrite cleavage surfaces and its formation is accompanied by minor vaterite. The progress of the carbonation always occurs from the outer-ward to the inner-ward surfaces and its rate depends on the anhydrite surface considered, with the (001) surface being much more reactive than the (010) and (100) surfaces. The thickness of the formed carbonate layer grows linearly with time. The original external shape of the anhydrite crystals and their surface details (e.g., cleavage steps) are preserved during the carbonation reaction. Textural characteristics of the transformed regions, such as the gradation in the size of calcite crystals, from ~2 mm in the outer region to ~17 mm at the calcite-anhydrite interface, the local preservation of calcite crystalographic orientation with respect to anhydrite and the distribution of the microporosity mainly within the carbonate layer without development of any significant gap at the calcite-anhydrite interface. Finally, we compare these results on anhydrite carbonation with those on gypsum carbonation and can explain the differences on the basis of four parameters: (1) the molar volume change involved in the replacement process in each case, (2) the lack/existence of epitactic growth between parent and product phases, (3) the kinetics of dissolution of the different surfaces, and (4) the chemical composition (amount of structural water) of the parent phases., This study was supported by the MINECO (Spain) under projects CGL2013-47988-C2-1-P and CGL2016-77138-C2-1-P, the Marie Curie EU-FP6 Mineral Nucleation and Growth Kinetics (MIN-GRO) Research and Training Network under contract MRTNCT-2006-035488, and by the UK Engineering and Physical Research Council through grant number EP/P015514/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combined Influence of Reagent Concentrations and Agar Hydrogel Strength on the Formation of Biomimetic Hydrogel–Calcite Composites

  • Greiner, Martina
  • Yin, Xiaofei
  • Fernández Díaz, Lurdes
  • Griesshaber, Erika
  • Weitzel, Florian
  • Ziegler, Andreas
  • Veintemillas-Verdaguer, S.
  • Schmahl, Wolfgang W.
We report results of CaCO3 crystallization experiments by counter diffusion in agar gel with two different solid contents (0.5 and 2 wt %) and two solute concentrations (0.1 M CaCl2, 0.1 M Na2CO3; 0.5 M CaCl2, 0.5 M Na2CO3). Solute concentration and hydrogel strength influence the characteristics of the gel–mineral composite formation. High reagent solution concentrations give rise to high supersaturation and high growth rates. When combined with a light gel, single crystal composites form; in a dense gel, the aggregates are mosaic crystal composites. Low reagent solution concentrations result in low supersaturation and low growth rates; when combined with a light gel, single crystal composites form; in a dense gel, the precipitate is a co-oriented polycrystal composite. Gel occlusion within the mineral increases with gel density. Gel distribution inside the mineral is homogeneous for high growth rates. For low growth rates, the gel accumulates locally in the precipitates. Light gels are pushed ahead by the growing crystals, and gel occlusion into the mineral is decreased; at low reagent solution concentrations, slightly more gel gets occluded. In conclusion, agar gel solid content determines the amount of gel occlusion and calcite orientation organization; reagent solution concentration influences the mode of gel distribution inside the mineral/gel composite aggregates., This research was partially funded by projects CGL2013-47988-C2-1-P and CGL2016-77138-C2-1-P (MECC-Spain). M.G. is supported by Deutsche Forschungsgemeinschaft, DFG Grant Gr 959/20-1,2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Epitactic Overgrowths of Calcite (CaCO3) on Anhydrite (CaSO4) Cleavage Surfaces

  • Cuesta Mayorga, Iris
  • Astilleros, José Manuel
  • Fernández Díaz, Lurdes
  • Morales, Juan
  • Prieto, Manuel
  • Roncal-Herrero, Teresa
  • Benning, Liane G.
We investigate the crystallographic relationships between calcite crystals overgrown on the three main anhydrite cleavage surfaces, (100), (010), and (001), as a result of the interaction between anhydrite surfaces with carbonate-rich aqueous solutions (0.5 mol/L Na2CO3). Scanning electron microscope (SEM) images and energy back scattered diffraction (EBSD) analyses reveal that this interaction always leads to oriented nucleation and growth of calcite crystals, characterized by a parallelism between the calcite {101̅4} faces and the corresponding anhydrite cleavage surface. A high density of oriented calcite crystals was observed on the (001)Anh face, while the calcite crystal density was significantly lower on the (100)Anh and (010)Anh faces. On all investigated anhydrite cleavage surfaces, calcite {101̅4} showed at least two excellent matching orientations, both defined by the parallelism between ⟨4̅41⟩Cal and one of the three crystallographic axes of anhydrite. As a result, two different populations of calcite crystals coexisted on the same substrate. In each population four groups of differently orientated crystals could be distinguished, related by symmetric operators inherent to the anhydrite substrates. The coalescence of these differently oriented crystals leads to the formation of twins. The calcite epitactic overgrowth contains an intrinsic intergranular porosity that makes the passivation of anhydrite crystals very unlikely. This characteristic together with the negative molar volume change involved in the anhydrite carbonation reaction makes anhydrite a material suitable to be used in the design of CO2 capture strategies., This study was supported by the MINECO (Spain) under projects CGL2013-47988-C2-1-P and CGL2016-77138- C2-1-P. I. Cuesta Mayorga acknowledges a FPI (BES-2014-070279) fellowship from the Spanish MINECO and L.G.B. acknowledges financial support from the Helmholtz Recruiting Initiative, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Crecimiento Epitaxial de Calcita (CaCO3) sobre las Superficies de Exfoliación de Anhidrita (CaSO4)

  • Astilleros, José Manuel
  • Cuesta Mayorga, Iris
  • Fernández Díaz, Lurdes
  • Morales, Juan
  • Prieto, Manuel
  • Roncal-Herrero, Teresa
  • Benning, Liane G.
Trabajo presentado en la XXXVI Reunión de la Sociedad Española de Mineralogía, celebrada en Oviedo (España) del 4 al 7 de julio de 2017, Las reacciones de disoluciónprecipitación conducen frecuentemente a la nucleación y posterior crecimiento de la fase que precipita (fase secundaria) sobre el mineral que se está disolviendo (substrato). Cuando esto ocurre, pueden desarrollarse procesos de remplazamiento mineral, cuyo avance vendrá favorecido por el desarrollo de una red de poros en la fase secundaria que garantice una comunicación continua entre la solución acuosa y el substrato (Putnis, 2002)., Este trabajo ha sido financiado por los proyectos CGL2013-47988-C2-1-P y CGL2016-77138-C2-1-P. Iris Cuesta agradece el disfrute de una beca FPI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conversion of biogenic aragonite into hydroxyapatite scaffolds in boiling solutions

  • Reinares-Fisac, Daniel
  • Veintemillas-Verdaguer, S.
  • Fernández-Díaz, L.
The interaction of Sepia officinalis cuttlefish bone, made of aragonitic CaCO, with (NH)HPO boiling solutions produces porous carbonate-bearing hydroxyapatite (Ca(PO)(OH)) scaffolds with extremely large specific surface area. Percentages of aragonite into hydroxyapatite conversion close to 90% are reached after 10 hours for all the conditions explored, though higher efficiency of the transformation process is achieved by increasing the concentration of the (NH)HPO solution. The conversion has a pseudomorphic character since it occurs with the accurate preservation of the external shape as well as the primary macro- and microtextural features of the biomineral. Moreover, the mineral replacement transformation is accompanied by a significant increase in surface area, which most likely relates to newly formed porosity. We proposed that this transformation occurs through an interface coupled dissolution-crystallization mechanism, which is continuously promoted by the release of CO to the atmosphere. The generation of newly formed porosity would be the consequence of the preservation of the biomineral's external shape, which requires the balance of both molar volume and solubility changes involved in the mineral transformation., Financial support from projects CGL2013-47988-C2-1-P and MAT2014-52069-R (Spanish Ministry of Economy and Competitiveness) is gratefully acknowledged. The authors thank the staff of ICTS Centro Nacional de Microscopía Electrónica for kindly providing technical support. The authors are indebted to Dr. Emilio Matesanz from the X-ray Diffraction Central Service of the Complutense University (UCM) for assistance with XRD measurements and interpretation. D. R.-F. thanks the Spanish Ministry of Education, Culture and Sport for funding through a research initiation scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Calcite (CaCO3) epitactic overgrowths on anhydrite (CaSO4) cleavage surfaces

  • Fernández Díaz, Lurdes
  • Cuesta Mayorga, Iris
  • Astilleros, José Manuel
  • Prieto, Manuel
Trabajo presentado en el 30th European Crystallographic Meeting, celebrado del 28 de agosto al 1 de septiembre de 2016 en Basilea (Suiza), The mineral replacement of calcium sulfate minerals by calcium carbonate phases is a common phenomenon in numerous Earth’s surface environments. This process is usually triggered by the presence of carbonate-rich aqueous solutions. It involves dissolution and crystallization reactions that, when finely coupled, lead to the formation of pseudomorphs. Reactions pathways which involve the formation of different calcium carbonate polymorphs have been observed depending on the specific calcium sulfate mineral. When the calcium sulfate mineral is anhydrite (CaSO4 ; Amma; a = 6.993 Å, b = 6.995 Å, c = 6.245 Å), the initial stages of the replacement reaction are characterized by the simultaneous formation of dissolution pits and the oriented nucleation of calcite (CaCO3 ; R3 ̅c; a = 4.941 Å, c = 16.864 Å) crystals on anhydrite crystal surfaces. The progress of the coupled dissolution-crystallization reactions eventually results in the formation of calcite pseudomorphs after anhydrite. In this work we investigate the crystallographic relationships observed during the development of these reactions between calcite crystals and the three main anhydrite cleavage surfaces, (100), (010) and (001). In all the investigated anhydrite cleavage surfaces, calcite crystals dispose one of their{104} faces in contact and parallel to the substrate. In the case of anhydrite (100) surface the better matching occurs with [001]Anh, [011]Anh║ <4 ̅41>Cal, <010>Cal. As a consequence, most calcite crystals show this orientation. However, for a few calcite crystals the matching occurs so that [010]Anh, [011]Anh ║ <4 ̅41>Cal, <010>Cal. Although this second matching is characterized by a slightly higher misfit, this still is within the limits required for epitactic nucleation from solution. On anhydrite (010) surface, calcite crystals are oriented according to a similar pattern as observed on (100) surface. Most calcite crystals appear oriented so that [001]Anh, [101]Anh ║ <4 ̅41>Cal, 2 x <010>Cal. This orientation provides an excellent matching. However, also in this case a small number of calcite crystals are oriented with [100]Anh, [101]Anh ║ <4 ̅41>Cal, 2 x <010>Cal. Calcite crystals grown on anhydrite (001) also shown two main orientations, with [100]Anh, [110]Anh ║ <4 ̅41>Cal, <010>Cal and [100]Anh, [010]Anh ║ [4 ̅41]Cal, [481 ̅]Cal., Funding through project CGL2013-47988-C2-1-P is acknowledged., Peer reviewed