Skip to main content

NANOCRISTALES MAGNETICOS MONO-NUCLEO Y MULTI-NUCLEO PARA APLICACIONES BIOMEDICAS

MAT2014-52069-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Nanoclustering and Dipolar Interactions in Heat Generation for Magnetic Hyperthermia

  • Coral, Diego Fernando
  • Mendoza Zélis, Pedro
  • Marciello, Marzia
  • Morales, María Del Puerto
  • Craievich, Aldo
  • Sánchez, Francisco H.
  • Fernández van Raap, Marcela B.
Biomedical magnetic colloids commonly used in magnetic hyperthermia experiments often display a bidisperse structure, i.e., are composed of stable nanoclusters coexisting with well-dispersed nanoparticles. However, the influence of nanoclusters in the optimization of colloids for heat dissipation is usually excluded. In this work, bidisperse colloids are used to analyze the effect of nanoclustering and long-range magnetic dipolar interaction on the magnetic hyperthermia efficiency. Two kinds of colloids, composed of magnetite cores with mean sizes of around 10 and 18 nm, coated with oleic acid and dispersed in hexane, and coated with meso-2,3-dimercaptosuccinic acid and dispersed in water, were analyzed. Small-angle X-ray scattering was applied to thoroughly characterize nanoparticle structuring. We proved that the magnetic hyperthermia performances of nanoclusters and single nanoparticles are distinctive. Nanoclustering acts to reduce the specific heating efficiency whereas a peak against concentration appears for the well-dispersed component. Our experiments show that the heating efficiency of a magnetic colloid can increase or decrease when dipolar interactions increase and that the colloid concentration, i.e., dipolar interaction, can be used to improve magnetic hyperthermia. We have proven that the power dissipated by an ensemble of dispersed magnetic nanoparticles becomes a nonextensive property as a direct consequence of the long-range nature of dipolar interactions. This knowledge is a key point in selecting the correct dose that has to be injected to achieve the desired outcome in intracellular magnetic hyperthermia therapy., We acknowledge CONICET and UNLP of Argentina for financial support with grants PIP 0720 and X11/680 and the European Union for Multifun (EU-FP ref 262943) and NanoMag (EU-FP7 ref 60448) projects and MAT2014-52069-R from the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

How shape and internal structure affect the magnetic properties of anisometric magnetite nanoparticles

  • Gavilán, Helena
  • Posth, Oliver
  • Bogart, Lara K.
  • Steinhoff, Uwe
  • Gutiérrez, Lucía
  • Morales, María Del Puerto
A three-step aqueous approach to obtain large (>50 nm) magnetite single-core particles has been developed. The steps are a) synthesis of antiferromagnetic nanoparticles, b) particle coating and c) subsequent reduction of the core material to magnetite. By variation of precursor material and process conditions, the synthesis yielded rhombohedra, discs or needles below 200 nm. A combination of X-ray diffraction, 57Fe Mössbauer spectroscopy and infrared spectroscopy confirmed magnetite to be the dominant final core material. From transmission electron microscopy, we identified porous structures after the reduction. Magnetic characterization of the different magnetic nanopaticles revealed strikingly different magnetic behaviour depending on their shape, internal structure and reduction process. We conclude that each of these parameters have to be considered in further characterization of large magnetite nanoparticles., This work was supported by the EC FP-7 grant “NanoMag” (grant agreement no 604448) and the Spanish Government by MAGO project (MAT2014-52069-R). The magnetic characterization was supported by COST Action TD1402. LG acknowledges financial support from the Ramón y Cajal subprogram (RYC-2014-15512)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ particles reorientation during magnetic hyperthermia application: Shape matters twice

  • Simeonidis, Konstantinos
  • Morales, María Del Puerto
  • Marciello, Marzia
  • Angelakeris, Makis
  • Presa, Patricia de la
  • Lázaro-Carrillo, Ana
  • Tabero, Andrea
  • Villanueva, Ángeles
  • Chubykalo-Fesenko, O.
  • Serantes, David
Promising advances in nanomedicine such as magnetic hyperthermia rely on a precise control of the nanoparticle performance in the cellular environment. This constitutes a huge research challenge due to difficulties for achieving a remote control within the human body. Here we report on the significant double role of the shape of ellipsoidal magnetic nanoparticles (nanorods) subjected to an external AC magnetic field: first, the heat release is increased due to the additional shape anisotropy; second, the rods dynamically reorientate in the orthogonal direction to the AC field direction. Importantly, the heating performance and the directional orientation occur in synergy and can be easily controlled by changing the AC field treatment duration, thus opening the pathway to combined hyperthermic/mechanical nanoactuators for biomedicine. Preliminary studies demonstrate the high accumulation of nanorods into HeLa cells whereas viability analysis supports their low toxicity and the absence of apoptotic or necrotic cell death after 24 or 48 h of incubation., This work was partially supported by the EC FP-7 grant “NanoMag” (grant agreement no. 604448), the Spanish Ministry of Economy and Competitiveness (MAT2013-47078-C2-2-P, MAT2014-52069-R, MAT2013-47395-C4-3-R, MAT2015- 67557-C2-1-P - MICINN, CONSOLIDER CSD2007-00041, CTQ2013-48767-C3-3-R), and Gobierno de la Comunidad de Madrid (NANOFRONTMAG, S2013/MIT-2850). D.S. acknowledges financial support from Xunta de Galicia (I2C Postdoctoral Plan). A.T. thanks UAM for a predoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Colloidal Flower-Shaped Iron Oxide Nanoparticles: Synthesis Strategies and Coatings

  • Gavilán, Helena
  • Morales, María Del Puerto
Gavilán, Helena et al., The assembly of magnetic cores into regular structures may notably influence the properties displayed by a magnetic colloid. Here, key synthesis parameters driving the self-assembly process capable of organizing colloidal magnetic cores into highly regular and reproducible multi-core nanoparticles are determined. In addition, a self-consistent picture that explains the collective magnetic properties exhibited by these complex assemblies is achieved through structural, colloidal, and magnetic means. For this purpose, different strategies to obtain flower-shaped iron oxide assemblies in the size range 25–100 nm are examined. The routes are based on the partial oxidation of Fe(OH)2, polyol-mediated synthesis or the reduction of iron acetylacetonate. The nanoparticles are functionalized either with dextran, citric acid, or alternatively embedded in polystyrene and their long-term stability is assessed. The core size is measured, calculated, and modeled using both structural and magnetic means, while the Debye model and multi-core extended model are used to study interparticle interactions. This is the first step toward standardized protocols of synthesis and characterization of flower-shaped nanoparticles., This work was partially supported by the European Commission Framework Program 7 (NanoMag project, NO 604448) and by the Spanish Ministry of Economy and Competitiveness (Mago project, No. MAT2014-52069-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning morphology and magnetism of magnetite nanoparticles by calix[8]arene-induced oriented aggregation

  • Vita, Francesco
  • Gavilán, Helena
  • Rossi, Francesca
  • Julián Fernández, César de
  • Secchi, Andrea
  • Arduini, Arturo
  • Albertini, Franca
  • Morales, María Del Puerto
Magnetite nanoparticles have been prepared by oriented aggregation exploiting the action of calix[8]arene, an organic macrocycle capable of complexing Fe ions, during the synthesis. Control over the degree of aggregation enables tuning of the morphology of the product, which can vary from multicore aggregated nanoparticles to nano-octahedra, with a dramatic change in the magnetic properties. Octahedral magnetite nanoparticles display ferrimagnetic behavior, which is typical of magnetite above 40 nm in size. In contrast, multicore nanostructures exhibit a narrower hysteresis loop and remarkable heating capacity under an alternating magnetic field. With the aim of producing a material useful for biomedical applications, all samples were made to be dispersible in water and biocompatible by ligand exchange with 2,3-dimercaptosuccinic acid. Their morphology and magnetic properties were maintained after functionalization, as well as their good colloidal properties, which were characterized by dynamic light scattering., This work was supported by the EU FP-7 grant “NanoMag” (grant agreement no. 604448), the Spanish Ministry of Economy and Competitiveness under the MAGO project (MAT2014-52069-R), the Cariparma Foundation through the BioNiMed project, the Italian Ministero dell'Università e della Ricerca (MIUR) (PRIN 2010CX2TLM “InfoChem”) and the University of Parma., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Counterion and solvent effects on the size of magnetite nanocrystals obtained by oxidative precipitation

  • Luengo, Yurena
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
  • Veintemillas-Verdaguer, S.
We present the effect of the counterions and the proportion of ethanol in the preparation of uniform magnetite nanocrystals by oxidative precipitation. In this work we compared the materials produced using iron(II) chloride, bromide and sulfate, sodium and potassium nitrates and hydroxides in water and ethanol 25%–water solution. The process was followed by chemical analysis of the remaining iron(II), and the variation of the pH. The magnetite nanoparticles were characterized by X-ray powder diffraction, transmission electron microscopy and specific surface area. Although the final product was always magnetite nanocrystals, the morphology and particle size distributions depended significantly on the nature of the counterions and the ethanol content. The morphologies observed ranged between cubic and octahedral depending on the size. Particle sizes were correlated with the Hofmeister scale that reflects the influence of the cosmotropic or caotropic character of the counterions in water or in water/ethanol mixtures. The Hofmeister effect accounts for the competition that occurs between the counterions and the magnetite precursors for the water molecules. The main conclusion is that cosmotropic counterions in the presence of ethanol favor the nucleation of magnetite and generate smaller nanocrystals. Nanoparticle size variations are greater than 50%, which is extremely relevant to their magnetic properties and therefore to their biomedical applications., This work was partially supported by grant No. MAT2014-52069-R from the Spanish Ministry of Economy and Competitiveness and the NanoMag project from the European Commission Framework Program 7 under grant agreement No. 604448. Lucía Gutiérrez acknowledges financial support from the Ramón y Cajal subprogram (RYC-2014-15512)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oriented Attachment of Recombinant Proteins to Agarose-Coated Magnetic Nanoparticles by Means of a β-Trefoil Lectin Domain

  • Acebrón, Iván
  • Ruiz, Amalia
  • Luengo, Yurena
  • Morales, María Del Puerto
  • Guisán, José Manuel
  • Mancheño, Jose M.
Design of generic methods aimed at the oriented attachment of proteins at the interfacial environment of magnetic nanoparticles currently represents an active field of research. With this in mind, we have prepared and characterized agarose-coated maghemite nanoparticles to set up a platform for the attachment of recombinant proteins fused to the β-trefoil lectin domain LSL, a small protein that combines fusion tag properties with agarose-binding capacity. Analysis of the agarose-coated nanoparticles by dynamic light scattering, Fourier transform infrared spectroscopy, and thermogravimetric studies shows that decoupling particle formation from agarose coating provides better results in terms of coating efficiency and particle size distribution. LSL interacts with these agarose-coated nanoparticles exclusively through the recognition of the sugars of the polymer, forming highly stable complexes, which in turn can be dissociated ad hoc with the competing sugar lactose. Characterization of the complexes formed with the fusion proteins LSL-EGFP (LSL-tagged enhanced green fluorescent protein from Aquorea Victoria) and LSL-BTL2 (LSL-tagged lipase from Geobacillus thermocatenolatus) provided evidence supporting a topologically oriented binding of these molecules to the interface of the agarose-coated nanoparticles. This is consistent with the marked polarity of the β-trefoil structure where the sugar-binding sites and the N- and C-terminus ends are at opposed sides. In summary, LSL displays topological and functional features expected from a generic molecular adaptor for the oriented attachment of proteins at the interface of agarose-coated nanoparticles., This work was partially supported by grant No. MAT2014-52069-R from the Spanish Ministry of Economy and Competitiveness (M.P.M.), by C-KBBE/3293 project from the European Commission (J.M.G.) and by grant BFU2010-17929 from the Spanish Ministry of Science and Innovation (J.M.M.). I.A. and Y.L. hold a predoctoral FPU fellowship from the Spanish Ministry of Economy and Competitiveness. A.G.R.-E. holds a predoctoral fellowship from a CSIC–CITMA collaborative project (ICMM, 2011-2014)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formation mechanism of maghemite nanoflowers synthesized by a polyol-mediated process

  • Gavilán, Helena
  • Sánchez, Helena H.
  • Fortes Brollo, María Eugenia
  • Asín, Laura
  • Moerner, Kimmie K.
  • Frandsen, Cathrine
  • Lázaro, Francisco J.
  • Serna Pereda, Carlos J.
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
Magnetic nanoparticles are being developed as structural and functional materials for use in diverse areas, including biomedical applications. Here, we report the synthesis of maghemite (γ-FeO) nanoparticles with distinct morphologies: single-core and multicore, including hollow spheres and nanoflowers, prepared by the polyol process. We have used sodium acetate to control the nucleation and assembly process to obtain the different particle morphologies. Moreover, from samples obtained at different time steps during the synthesis, we have elucidated the formation mechanism of the nanoflowers: the initial phases of the reaction present a lepidocrocite (γ-FeOOH) structure, which suffers a fast dehydroxylation, transforming to an intermediate >undescribed> phase, possibly a partly dehydroxylated lepidocrocite, which after some incubation time evolves to maghemite nanoflowers. Once the nanoflowers have been formed, a crystallization process takes place, where the γ-FeO crystallites within the nanoflowers grow in size (from ∼11 to 23 nm), but the particle size of the flower remains essentially unchanged (∼60 nm). Samples with different morphologies were coated with citric acid and their heating capacity in an alternating magnetic field was evaluated. We observe that nanoflowers with large cores (23 nm, controlled by annealing) densely packed (tuned by low NaAc concentration) offer 5 times enhanced heating capacity compared to that of the nanoflowers with smaller core sizes (15 nm), 4 times enhanced heating effect compared to that of the hollow spheres, and 1.5 times enhanced heating effect compared to that of single-core nanoparticles (36 nm) used in this work., This work was supported by the EC FP-7 grant “NanoMag” (grant agreement no. 604448) and the Spanish Government by MAGO project (MAT2014-52069-R). L.G. acknowledges financial support from the Ramon y Cajal subprogram (RYC-2014-15512) and M.E.F.B. acknowledges financial support from the Brazilian agency CNPq grant (232947/2014-7)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PEG-copolymer-coated iron oxide nanoparticles that avoid the reticuloendothelial system and act as kidney MRI contrast agents

  • Gómez-Vallejo, Vanessa
  • Puigivila, María
  • Plaza-García, Sandra
  • Szczupak, Boguslaw
  • Piñol, Rafael
  • Murillo, José Luis
  • Sorribas, Víctor
  • Lou, Gustavo
  • Veintemillas-Verdaguer, S.
  • Ramos-Cabrer, Pedro
  • Llop, Jordi
  • Millán, Ángel
In vitro experiments have shown the great potential of magnetic nanocarriers for multimodal imaging diagnosis and non-invasive therapies. However, their extensive clinical application is still jeopardized by a fast retention in the reticuloendothelial system (RES). The other issue that restrains their potential performance is slow degradation and excretion, which increases their risks of toxicity. We report a promising case in which multicore iron oxide nanoparticles coated with a poly(4-vinylpyridine) polyethylene glycol copolymer show low RES retention and high urinary excretion, as confirmed by single photon emission computerized tomography (SPECT), gamma counting, magnetic resonance imaging (MRI) and electron microscopy (EM) biodistribution studies. These iron oxide-copolymer nanoparticles have a high PEG density in their coating which may be responsible for this effect. Moreover, they show a clear negative contrast in the MR imaging of the kidneys. These nanoparticles with an average hydrodynamic diameter of approximately 20 nm were nevertheless able to cross the glomerulus wall which has an effective pore size of approximately 6 nm. A transmission electron microscopy inspection of kidney tissue revealed the presence of iron containing nanoparticle clusters in proximal tubule cells. This therefore makes them exceptionally useful as magnetic nanocarriers and as new MRI contrast agents for the kidneys., Financial support by the Spanish Ministry of Science and Innovation (MAT2014-52069-R) (SAF2014-53413-R) (PC2015-1-05 (53-80)) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Versatile theranostics agents designed by coating ferrite nanoparticles with biocompatible polymers

  • Zahraei, M.
  • Marciello, Marzia
  • Lazaro-Carrillo, A.
  • Villanueva, A.
  • Herranz, Fernando
  • Talelli, Marina
  • Costo, Rocío
  • Monshi, Ahmad
  • Shahbazi-Gahrouei, D.
  • Amirnasr, M.
  • Behdadfar, B.
  • Morales, María Del Puerto
Three biocompatible polymers, polyethylene glycol (PEG), dextran and chitosan, have been used in this work to control the colloidal stability of magnetic nanoparticles (14 ± 5 nm in diameter) and to vary the aggregation state in order to study their effect on relaxometric and heating properties. Two different coating strategies have been deeply developed; one based on the formation of an amide bond between citric acid coated nanoparticles (NPs) and amine groups present on the polymer surface and the other based on the NP encapsulation. Relaxometric properties revealed that proton relaxation rates strongly depend on the coating layer hydrophilicity and the aggregation state of the particles due to the presence of magnetic interactions. Thus, while PEG coating reduces particle aggregation by increasing inter-particle spacing leading to reduction of both T and T relaxation, dextran and chitosan lead to an increase mainly in T values due to the aggregation of particles in bigger clusters where they are in close contact. Dextran and chitosan coated NPs have also shown a remarkable heating effect during the application of an alternating magnetic field. They have proved to be potential candidates as theranostic agents for cancer diagnosis and treatment. Finally, cytotoxicity of PEG conjugated NPs, which seem to be ideal for intravenous administration because of their small hydrodynamic size, was investigated resulting in high cell viability even at 0.2 mg Fe ml after 24 h of incubation. This suspension can be used as drug/biomolecule carrier for in vivo applications., This work was supported by the Isfahan University of Technology, Iran and partially supported by the European Union (EU-FP7MULTIFUN project, ref. 246479, MAT2014-52069-R and S2013/MIT-2850).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Time-course assessment of the aggregation and metabolization of magnetic nanoparticles

  • Rojas, José Manuel
  • Gavilán, Helena
  • Dedo, Vanesa
  • Lorente-Sorolla, Eduardo
  • Sanz-Ortega, Laura
  • Silva, Gustavo B. da
  • Costo, Rocío
  • Pérez-Yagüe, Sonia
  • Talelli, Marina
  • Marciello, Marzia
  • Morales, María Del Puerto
  • Barber, Domingo F.
  • Gutiérrez, Lucía
To successfully develop biomedical applications for magnetic nanoparticles, it is imperative that these nanoreagents maintain their magnetic properties in vivo and that their by-products are safely metabolized. When placed in biological milieu or internalized into cells, nanoparticle aggregation degree can increase which could affect magnetic properties and metabolization. To evaluate these aggregation effects, we synthesized citric acid-coated iron oxide nanoparticles whose magnetic susceptibility can be modified by aggregation in agar dilutions and dextran-layered counterparts that maintain their magnetic properties unchanged. Macrophage models were used for in vitro uptake and metabolization studies, as these cells control iron homeostasis in the organism. Electron microscopy and magnetic susceptibility studies revealed a cellular mechanism of nanoparticle degradation, in which a small fraction of the particles is rapidly degraded while the remaining ones maintain their size. Both nanoparticle types produced similar iron metabolic profiles but these profiles differed in each macrophage model. Thus, nanoparticles induced iron responses that depended on macrophage programming. In vivo studies showed that nanoparticles susceptible to changes in magnetic properties through aggregation effects had different behavior in lungs, liver and spleen. Liver ferritin levels increased in these animals showing that nanoparticles are degraded and their by-products incorporated into normal metabolic routes. These data show that nanoparticle iron metabolization depends on cell type and highlight the necessity to assess nanoparticle aggregation in complex biological systems to develop effective in vivo biomedical applications. Statement of Significance Magnetic iron oxide nanoparticles have great potential for biomedical applications. It is however imperative that these nanoreagents preserve their magnetic properties once inoculated, and that their degradation products can be eliminated. When placed in a biological milieu nanoparticles can aggregate and this can affect their magnetic properties and their degradation. In this work, we showed that iron oxide nanoparticles trigger the iron metabolism in macrophages, the main cell type involved in iron homeostasis in the organism. We also show that aggregation can affect nanoparticle magnetic properties when inoculated in animal models. This work confirms iron oxide nanoparticle biocompatibility and highlights the necessity to assess in vivo nanoparticle aggregation to successfully develop biomedical applications., José M. Rojas was supported by a JAEdoc grant co-financed by the CSIC and the European Social Fund. Laura Sanz-Ortega receives a predoctoral FPU grant (13/05037) from the Spanish Ministry of Economy and Competitiveness. Marina Talelli received a JdC post-doctoral grant (JCI-2012-13159) from the Spanish Ministry of Economy and Competitiveness. Gustavo B. da Silva was beneficiary of a sandwich-PhD grant of the Brazilian agency CNPq (Science without borders – Process: 279444/2013-9). Lucía Gutiérrez was the beneficiary of a post-doctoral grant from the AXA Research Fund and also acknowledges financial support from the Ramón y Cajal subprogram (RYC-2014-15512). This work was supported in part by grants from the Spanish Ministry of Economy and Competitiveness (SAF-2011-23639 and SAF-2014-54057-R to DFB and MAT2014-52069-R to Sabino Veintemillas-Verdaguer).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Key parameters on the microwave assisted synthesis of magnetic nanoparticles for MRI contrast agents

  • Fortes Brollo, María Eugenia
  • Veintemillas-Verdaguer, S.
  • Menor Salván, Cesar
  • Morales, María Del Puerto
Uniform iron oxide magnetic nanoparticles have been synthesized using a microwave assisted synthesis method in organic media and their colloidal, magnetic, and relaxometric properties have been analyzed after its transference to water and compared with those nanoparticles prepared by thermal decomposition in organic media. The novelty of this synthesis relies on the use of a solid iron oleate as precursor, which assures the reproducibility and scalability of the synthesis, and the microwave heating that resulted in being faster and more efficient than traditional heating methods, and therefore it has a great potential for nanoparticle industrial production. The effect of different experimental conditions such as the solvent, precursor, and surfactant concentration and reaction time as well as the transference to water is analyzed and optimized to obtain magnetic iron oxide nanoparticles with sizes between 8 and 15 nm and finally colloids suitable for their use as contrast agents on Magnetic Resonance Imaging (MRI). The r2 relaxivity values normalized to the square of the saturation magnetization were shown to be constant and independent of the particle size, which means that the saturation magnetization is the main parameter controlling the efficiency of these magnetic nanoparticles as MRI T2-contrast agents., This work was supported by the Spanish Ministry of Economy and Competitiveness (MAGO project MAT2014-52069R) and by the Brazilian agency CNPq grant [232947/2014-7]. X-ray diffraction, FTIR spectroscopy, and thermogravimetric and chemical analysis were carried out in the support laboratories of Instituto de Ciencia de Materiales de Madrid (CSIC). MRI relaxivity data were carried out at the CNIC, Madrid. The authors would like to acknowledge Lucia Gutierrez for the ZFC/FC curves using the SQUID at the Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza, and the TEM facilities at the SIDI of the Madrid Autonomous University. Finally, M. E. F. Brollo acknowledges the Brazilian agency CNPq for her grant within the Science Without Borders Program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conversion of biogenic aragonite into hydroxyapatite scaffolds in boiling solutions

  • Reinares-Fisac, Daniel
  • Veintemillas-Verdaguer, S.
  • Fernández-Díaz, L.
The interaction of Sepia officinalis cuttlefish bone, made of aragonitic CaCO, with (NH)HPO boiling solutions produces porous carbonate-bearing hydroxyapatite (Ca(PO)(OH)) scaffolds with extremely large specific surface area. Percentages of aragonite into hydroxyapatite conversion close to 90% are reached after 10 hours for all the conditions explored, though higher efficiency of the transformation process is achieved by increasing the concentration of the (NH)HPO solution. The conversion has a pseudomorphic character since it occurs with the accurate preservation of the external shape as well as the primary macro- and microtextural features of the biomineral. Moreover, the mineral replacement transformation is accompanied by a significant increase in surface area, which most likely relates to newly formed porosity. We proposed that this transformation occurs through an interface coupled dissolution-crystallization mechanism, which is continuously promoted by the release of CO to the atmosphere. The generation of newly formed porosity would be the consequence of the preservation of the biomineral's external shape, which requires the balance of both molar volume and solubility changes involved in the mineral transformation., Financial support from projects CGL2013-47988-C2-1-P and MAT2014-52069-R (Spanish Ministry of Economy and Competitiveness) is gratefully acknowledged. The authors thank the staff of ICTS Centro Nacional de Microscopía Electrónica for kindly providing technical support. The authors are indebted to Dr. Emilio Matesanz from the X-ray Diffraction Central Service of the Complutense University (UCM) for assistance with XRD measurements and interpretation. D. R.-F. thanks the Spanish Ministry of Education, Culture and Sport for funding through a research initiation scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-step fast synthesis of nanoparticles for MRI: coating chemistry as the key variable determining positive or negative contrast

  • Pellico, Juan
  • Ruiz-Cabello, Jesús
  • Fernández-Barahona, Irene
  • Gutiérrez, Lucía
  • Lechuga-Vieco, Ana V.
  • Enríquez, José Antonio
  • Morales, María Del Puerto
  • Herranz, Fernando
Iron oxide nanomaterial is a typical example of a magnetic resonance imaging probe for negative contrast. It has also been shown how this nanomaterial can be synthesized for positive contrast by modification of the composition and size of the core. However, the role of the organic coating in the relaxometric properties is largely unexplored. Here, maghemite nanoparticles with either excellent positive or very good negative contrast performance are obtained by modifying coating thickness while the core is kept unchanged. Different nanoparticles with tailored features as contrast agent according to the coating layer thickness have been obtained in a single-step microwave-driven synthesis by heating at different temperatures. A comprehensive analysis is conducted of how the composition and structure of the coating affects the final magnetic, relaxometric, and imaging performance. These results show how the organic coating plays a fundamental role in the intrinsic relaxometric parameters of iron oxide-based contrast media., This study was supported by a grant from the Spanish Ministry for Economy and Competitiveness (MEyC) (grant nos. MAT2013-47303-P, MAT2014-52069-R, SAF2016-79593-P). L.G. received financial support from the Ramón y Cajal subprogram (RYC-2014-15512). The CNIC is supported by the MEyC and the Pro-CNIC Foundation and is a SO-Center of Excellence (SEV-2015-0505).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The internal structure of magnetic nanoparticles determines the magnetic response

  • Pacakova, B.
  • Kubickova, S.
  • Salas, Gorka
  • Mantlikova, A. R.
  • Marciello, Marzia
  • Morales, María Del Puerto
  • Niznansky, D.
  • Vejpravova, J.
This work aims to emphasize that the magnetic response of single-domain magnetic nanoparticles (NPs) is driven by the NPs' internal structure, and the NP size dependencies of magnetic properties are overestimated. The relationship between the degree of the NPs' crystallinity and magnetic response is unambiguously demonstrated in eight samples of uniform maghemite/magnetite NPs and corroborated with the results obtained for about 20 samples of spinel ferrite NPs with different degrees of crystallinity. The NP samples were prepared by the thermal decomposition of an organic iron precursor subjected to varying reaction conditions, yielding variations in the NP size, shape and relative crystallinity. We characterized the samples by using several complementary methods, such as powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), high resolution TEM (HR-TEM) and Mössbauer spectroscopy (MS). We evaluated the NPs' relative crystallinity by comparing the NP sizes determined from TEM and PXRD and further inspecting the NPs' internal structure and relative crystallinity by using HR-TEM. The results of the structural characterization were put in the context of the NPs' magnetic response. In this work, the highest saturation magnetization (M) was measured for the smallest but well-crystalline NPs, while the larger NPs exhibiting worse crystallinity revealed a lower M. Our results clearly demonstrate that the NP crystallinity level that is mirrored in the internal spin order drives the specific magnetic response of the single-domain NPs., This work was supported by the Czech Science Foundation (Project 15-01953S), the Spanish Ministry of Economy and Competitiveness (Project MAT2015-71806-R), the Madrid regional government (NANOFRONTMAG, S2013/MIT-2850), the Spanish government project MAGO (under Grant MAT2014-52069-R). Magnetic measurements were performed in the MLTL.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

How shape and internal structure affect the magnetic properties of anisometric magnetite nanoparticles

  • Gavilán, H.
  • Posth, O.
  • Bogart, L. K.
  • Steinhoff, U.
  • Gutiérrez, L.
  • Morales, M. P.
A three-step aqueous approach to obtain large (>50 nm) magnetite single-core particles has been developed. The steps are a) synthesis of antiferromagnetic nanoparticles, b) particle coating and c) subsequent reduction of the core material to magnetite. By variation of precursor material and process conditions, the synthesis yielded rhombohedra, discs or needles below 200 nm. A combination of X-ray diffraction, 57Fe Mössbauer spectroscopy and infrared spectroscopy confirmed magnetite to be the dominant final core material. From transmission electron microscopy, we identified porous structures after the reduction. Magnetic characterization of the different magnetic nanopaticles revealed strikingly different magnetic behaviour depending on their shape, internal structure and reduction process. We conclude that each of these parameters have to be considered in further characterization of large magnetite nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unravelling the mechanisms that determine the uptake and metabolism of magnetic single and multicore nanoparticles in a: Xenopus laevis model

  • Marín-Barba, M.
  • Gavilán, H.
  • Gutiérrez, L.
  • Lozano-Velasco, E.
  • Rodríguez-Ramiro, I.
  • Wheeler, G.N.
  • Morris, C.J.
  • Morales, M.P.
  • Ruiz, A.
Multicore superparamagnetic nanoparticles have been proposed as ideal tools for some biomedical applications because of their high magnetic moment per particle, high specific surface area and long term colloidal stability. Through controlled aggregation and packing of magnetic cores it is possible to obtain not only single-core but also multicore and hollow spheres with internal voids. In this work, we compare toxicological properties of single and multicore nanoparticles. Both types of particles showed moderate in vitro toxicity (MTT assay) tested in Hep G2 (human hepatocellular carcinoma) and Caco-2 (human colorectal adenocarcinoma) cells. The influence of surface chemistry in their biological behavior was also studied after functionalization with O, O'-bis(2-aminoethyl) PEG (2000 Da). For the first time, these nanoparticles were evaluated in a Xenopus laevis model studying their whole organism toxicity and their impact upon iron metabolism. The degree of activation of the metabolic pathway depends on the size and surface charge of the nanoparticles which determine their uptake. The results also highlight the potential of Xenopus laevis model bridging the gap between in vitro cell-based assays and rodent models for toxicity assessment to develop effective nanoparticles for biomedical applications.
Docta Complutense
Publication Artículo científico (JournalArticle)

In-situ particles reorientation during magnetic hyperthermia application: Shape matters twice

  • Simeonidis, Konstantinos
  • Puerto Morales Herrero, María Del
  • Marciello, Marzia
  • Angelakeris, Makis
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Lázaro Carrillo, Ana
  • Tabero Truchado, Andrea
  • Villanueva Oroquieta, Ángeles
  • Chubykalo-Fesenko, Oksana
  • Serantes Abalo, David
Promising advances in nanomedicine such as magnetic hyperthermia rely on a precise control of the nanoparticle performance in the cellular environment. This constitutes a huge research challenge due to difficulties for achieving a remote control within the human body. Here we report on the significant double role of the shape of ellipsoidal magnetic nanoparticles (nanorods) subjected to an external AC magnetic field: first, the heat release is increased due to the additional shape anisotropy; second, the rods dynamically reorientate in the orthogonal direction to the AC field direction. Importantly, the heating performance and the directional orientation occur in synergy and can be easily controlled by changing the AC field treatment duration, thus opening the pathway to combined hyperthermic/mechanical nanoactuators for biomedicine. Preliminary studies demonstrate the high accumulation of nanorods into HeLa cells whereas viability analysis supports their low toxicity and the absence of apoptotic or necrotic cell death after 24 or 48 h of incubation.