Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evolution of the microstructure and mechanical properties of zirconia-based composites sintered by microwave technology

  • Bonilla-Molina, Ashley
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Moreno, Rodrigo
[EN] This work aims to produce zirconia-based materials by microwave sintering process for dental and prosthetic applications. Two compositions were evaluated: alumina-toughened-zirconia with 25 wt.% Al2O3, stabilized with 10.5 wt.%(Ce, Y), and yttria-stabilized-zirconia (5.4 wt.% Y2O3). The microstructural evolution and its influence on their mechanical properties were analyzed. The composites were sintered by conventional sintering at 1400 and 1500 ¿C with 2 h dwelling, and by microwave sintering at 1200 and 1300 ¿C with 10- and 15-min dwell times, resulting in fully densified ceramics. Relative densities are > 97% and HV higher than 11 GPa for all compositions and sintering conditions. The FESEM images confirm the formation of platelets at higher temperatures, which results in an increase in fracture toughness from 5.0 to 8.2 MPa¿m1/2. The low-thermal-degradation indicates that the composite performs well and that the tetragonal-to-monoclinic transformation is absent after 40 h of ageing, making this material suitable for dental and prosthetic applications., This publication is part of the grant CNS2023 144190 funded by MICIU/AEI/ 10.13039/501,100,011,033 and by the European Union NextGenerationEU/PRTR . CIGRIS/2022/077 and CIAICO/2023/264 projects funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

Microalgae Chorella sp. in biofloc Penaeus vannamei culture [Dataset], Biofloc characterization after achieving a stable population of Chorella sp. for Penaeus vannamei culture (Bonne, 1931).

  • Cascales Martos, Tatiana
Biofloc systems improve water quality and add nutritional value to aquaculture production through complex microbial and planktonic communities, in which the inclusion of microalgae can enhance nutrient recycling and overall system functionality. This study evaluated the inoculation of microalgae in biofloc systems for Penaeus vannamei under different photoperiod regimes. In the first experiment, Chlorella sp. under 16:8 and, particularly, 12:12 photoperiods established stable populations, increased biofloc biodiversity, and improved the mineral profile of the system. In the second experiment, Chlorella sp. persisted for up to 32 days following a single inoculation, reduced nitrate accumulation, and enriched the biofloc with polyunsaturated fatty acids associated with immune function. Although no consistent effect on animal growth was observed, the results highlight the interaction between water quality, biofloc composition, and zootechnical performance. Overall, Chlorella sp. under a 12:12 photoperiod enhanced the ecological and nutritional quality of the biofloc, although further studies are required to optimize inoculation protocols and maximize productive benefits. Shrimp_growth include data on the animals’ growth performance. Water_quality corresponds to the monitoring of biofloc water quality in which the animals were reared. Chlorophyll _concentration include date to chlorophyll content estimate was used to estimate the quantification of the autotrophic population. Plankton_community refers to describe the evolution of biofloc planktonic composition. Nutritional_biofloc refers to dry matter, ash, crude lipid, crude protein anda fatty acid content analyses performed biofloc samples. Mineral_content refers to decribe major and trace mineral element dynamics of biofloc.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combined and Individual Effects of Chlorella sp. and Bacterial Probiotics in Biofloc Systems for White Shrimp (Penaeus vannamei)

  • Cascales-Martos, Tatiana
  • Moyano López, Francisco Javier
  • Brol, Jéssica
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
  • Tomas-Vidal, A.|||0000-0002-2985-9324
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Peñaranda, D.S.|||0000-0002-0861-976X
[EN] This study aimed to evaluate the effects of establishing a population of the green microalgae Chlorella sp. on different key aspects of a biofloc culture of Penaeus vannamei in comparison with those obtained with a commercial probiotic. The aspects evaluated were shrimp zootechnical performance, nutritional composition of biofloc and microbial populations of shrimp intestinal microbiota and biofloc. Four treatments were tested: two of them included Chlorella sp. alone (M) or in combination to a bacterial probiotic (MP), while the other two included only the probiotic (P) or none of them (C). The presence of Chlorella sp. enhanced protein and phosphorus bioavailability in the biofloc and contributed to nutrient bioremediation within the system. However, shrimp growth performance and survival were significantly reduced, likely due to greater and more prolonged nitrate exposure following microalgae inoculation. Although overall nitrate and phosphate concentrations were higher in microalgae treatment, their accumulation over the experimental period was lower in the presence of Chlorella sp. In addition, microalgal supplementation reduced the abundance of bacterial groups associated with oligotrophic lifestyles, complex organic matter degradation, and nitrogen cycling in the intestinal microbiota. In contrast, probiotic supplementation increased protein content in shrimp and phosphorus bioavailability in the biofloc, while zootechnical performance remained comparable to the control and was higher than in microalgae treatments. Furthermore, probiotic addition reduced the abundance of Flavobacteriaceae, a bacterial family proposed as a bioindicator of White Feces Syndrome (WFS) in P. vannamei., This research was funded by the Ministry of Science and Innovation, Spain, the State Research Agency (AEI), and the European Union NextGenerationEU/PRTR, grant TED2021-129272B-C21. T.C-M. was supported by Generalitat Valenciana, through the INVEST Program (grant INVEST/2022/434). J.B. was supported by a predoctoral fellowship from the Generalitat Valenciana under the Santiago Grisolia Program (grant CIGRIS/2021/109).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biofloc characterization after achieving a stable population of Chlorella sp. for Penaeus vannamei culture (Bonne, 1931)

  • Cascales-Martos, Tatiana
  • Aguilar-Escribano, Javier
  • Sánchez-Jerez, Pablo
  • Brol, Jéssica
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
  • Tomas-Vidal, A.|||0000-0002-2985-9324
  • Peñaranda, D.S.|||0000-0002-0861-976X
[EN] This study investigated the integration of microalgae into biofloc systems for Penaeus vannamei under controlled photoperiods, assessing effects on growth performance, water quality, and biofloc ecology. Two consecutive experiments were conducted: (1) evaluation of four photoperiod regimes (16:8, 12:12, 8:16, 0:24 light:dark) combined with Chlorella sp. or Phaeodactylum tricornutum, and (2) the comparison of microalgae or probiotic addition in a biofloc system. Chlorella sp. under 16:8 and 12:12 photoperiods maintained stable populations, promoted greater biodiversity, particularly complex zooplankton and improved mineral profiles by increasing boron and arsenic while reducing bromine. In the second experiment, Chlorella sp. persisted up to 32 days, contributing to nitrate reduction and enriching arachidonic and eicosapentaenoic acid content in the biofloc. However, in terms of growth, the better SGR obtained in the first assay was not confirmed in a second trial. Principal component analysis highlighted a consistent correlation between nitrate concentration and the performance of shrimp, as well as microalgae inoculation and PUFA increase on biofloc. Overall, Chlorella sp. under a 12:12 photoperiod enhanced biofloc quality and ecological diversity, supporting its potential for improving aquaculture system performance., This work was supported by European Union Next Generation-Plan de Recuperación-Ministerio de Ciencia e Innovación-Gobierno de España (TED2021 129272B-C21). T. Cascales contract was supported by European Union Next Generation-Plan of Conselleria d innovació, Universitats, Ciència i Societat Digital of Generalitat Valenciana (INVEST/2022/434). J. Brol has a predoctoral grant from Generalitat Valenciana (Programa Santiago Grisolía 2021; CIGRIS/2021/109). Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mechanistic Insights Into the Photosensitizing Properties of the Topical Retinoid Tazarotene

  • Soler-Orenes, Juan Antonio
  • Dillon, Macarena-Noeli
  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Matilde
  • Andreu, Inmaculada|||0000-0003-3409-9443
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Since the FDA approval of tretinoin in 1971, retinoids have been key in treating acne and different skin pathologies. Tazarotene (TZE), a third-generation retinoid and prodrug, is converted in the skin to its active form, tazarotenic acid (TZA). Its structure allows absorption of UVA/UVB light, prompting concerns about potential phototoxicity, but data on the excited state properties of TZE and TZA are still lacking. This work investigates these retinoids' behavior under UVA light exposure through a combined spectroscopic, analytical, and biological approximation. The results show that both compounds form long-lived triplet excited states, which interact with oxygen to produce reactive singlet oxygen. Additionally, TZA interacts with tryptophan (Trp), leading to the formation of a photoproduct with a mass corresponding to a Trp/TZA cyclobutene adduct. These results correlate with reduced cell viability in fibroblasts exposed to light after treatment with TZE or TZA, indicating potential phototoxic effects. Such light-induced reactivity may also be related to the enhanced therapeutic results observed when TZE is used alongside narrow-band UVB phototherapy., Ministerio de Ciencia, Innovacion y Universidades (PID2021-128348NB-I00; PID2024-162272NB-I00; CEX2021-001230-S; PRE2022-105863); Generalitat Valenciana (CIGRIS/2022/091).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of calcination rate on mechano-chemically activated powders for the synthesis of lead-free KNN-type ceramics

  • Bonilla-Molina, Ashley
  • Pruna, Alina Iuliana|||0000-0002-5250-066X
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Fernández-González, Daniel
[EN] Given the raising environmental concerns over lead toxicity, replacing the common leadbased piezoelectric ceramics with a proper alternative became a hot topic. (Na0.5K0.5)NbO3 (KNN) is considered a potential replacement for such ceramics. This work presents the synthesis of KNN-type ceramics based on conventional solid-state reaction, where the effect of precursor particle size is studied. A combined mechanical activation by ball milling and calcination at low temperature of 800 ¿C is applied. The phase structure evolution, morphology and mechanical properties are investigated systematically with the particle size and the calcination rate. The results indicate a marked effect of the precursor particle size on the properties of obtained ceramics. Secondary phase content could be lowered and tetragonality improved by the applied approach. Despite the presence of secondary phases, dielectric measurements indicated typical values of dielectric constant and loss for piezoelectric materials., This publication is part of the grant PID2021-128548OBC21 & C22 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU , and the grant CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR . CIGRIS/2022/077 project funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

BOPHY Dyes Bearing Arylsulfenyl Moieties as Highly Efficient Triplet Photosensitizers

  • Bellaizac-Riascos, Angie Julieth
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Cortés-Villena, Alejandro
  • Galian, Raquel E.
  • Pérez-Prieto, Julia
[EN] Encouraged by the successful application of BOPHY dyes in a wide range of scientific fields, from energy to biology, the design of novel compounds based on this type of scaffold appears to be warranted. Herein, we have synthesized a family of symmetric BOPHY dyes bearing arylsulfenyl groups at the 2- and 7-position of the main core, which were fully characterized. The molecular structures were confirmed by the X-ray diffraction (XRD) technique. The photophysical properties were investigated in detail, including spectroscopic measurements and laser flash photolysis experiments. Both the singlet and the triplet excited states of the novel BOPHY dyes were characterized in different solvents. Considering their intersystem crossing quantum yields, these dyes were found to be suitable triplet photosensitizers in bimolecular systems for photon upconversion based on triplet-triplet annihilation. Furthermore, not only direct but also indirect experiments revealed that they effectively acted as photosensitizers for singlet oxygen generation, making them potential candidates for biological applications., Financial support from the Spanish Government (projects PID2023-148367OB-I00 and PID2022-1381890NB-I00 funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe") and Generalitat Valenciana (projects IDIFEDER/2018/064, IDIFEDER/2021/064, and CIPROM/2022/57) is gratefully acknowledged. Julieth Bellaizac-Riascos thanks Generalitat Valenciana for a Grisolia contract (CIGRIS/2022/027).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Food 3D Printing Process on the Rheological Properties of Rice Protein Printing Inks

  • Barrios-Rodríguez, Yeison Fernando|||0000-0001-6244-8773
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] Different statistical approaches were used to analyze the rheological properties of a rice-protein-based product before and after printing. The printing ink was composed of 30% rice protein and 70% water, with the addition of 0.5% xanthan gum. Printing parameters: The layer height (1 and 1.5 mm), printing speed (50 and 35 mm/s), and nozzle diameter (1.2 and 1.7 mm) were evaluated. Rheological properties were determined before and after printing using an oscillatory test from 0.1 to 10 Hz at 1 Pa. The decomposition of the curves into principal components helped us better understand the variations of the rheological properties along the frequency, differentiating the samples before and after printing., This research was funded by Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number AICO/2021/137, project AGROALNEXT/2022/001, and from MCIN/AEI/10.13039/501100011033/ through project PID2020-115973RB-C22 and the FPI Ph.D. contract granted by Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number CIGRIS/2021/105.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

Early Physiological and Gut Microbiota Responses to Dietary Fishmeal Reduction in Mugil cephalus Under Biofloc Technology [Dataset]

  • Brol, Jéssica
  • Tomas-Vidal, A.|||0000-0002-2985-9324
  • Olivares-Perona, Ruben|||0009-0000-8374-5056
  • Rodilla, M|||0000-0001-6767-5676
  • Falco, S.|||0000-0002-8679-9153
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Carbó, Ricard
  • Gisbert, Enric
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
  • Peñaranda, D.S.|||0000-0002-0861-976X
The early intestinal response of Mugil cephalus to fishmeal replacement with alternative protein sources under biofloc technology (BFT) was assessed. Juvenile mullet (82.68 ± 0.05 g) were distributed among three dietary treatments with decreasing fishmeal inclusion levels of 15%, 5%, and 0%, corresponding to FM15, FM5, and FM0, respectively. After 27 days of feeding, intestinal samples were analyzed for microbiota composition, transcriptomic responses and enzymatic activity. The FM0 group exhibited reduced intestinal enzyme activity, whereas no significant differences were observed in terms of gut microbiota among the diets. Furthermore, transcriptomic analysis revealed differentially expressed genes associated with enriched GO terms and KEGG pathways related to lipid metabolism. This response was consistent with the lower mesenteric fat indices and whole-body lipid content observed in fish fed the FM0 diet, suggesting an early metabolic adjustment associated with complete fishmeal replacement and the higher dietary protein content. All diets exhibited high protein efficiency ratios (9.98 ± 2.42) and low feed conversion ratios (0.40 ± 0.17), with no significant differences observed among them. However, complete fishmeal replacement negatively affected intestinal physiology and lipid storage, indicating that these alterations were not fully compensated for by the biofloc system and may not be physiologically sustainable over longer periods. Further studies over an extended period could be carried out to evaluate the long-term effects of these diets., This work was supported by Grant TED2021-129272B-C21, funded by MICIU/AEI/10.13039/501100011033, and by the European Union NextGenerationEU/PRTR and the Generalitat Valenciana (GVA AICO/2021/198). J. Brol has a predoctoral grant from Generalitat Valenciana (Programa Santiago Grisolía 2021; CIGRIS/2021/109). R. Olivares-Perona has a technician contract that was funded by TED2021-129272B-C21. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced Green Hydrogen Generation via Photocatalytic Water Splitting Using V-Doped Ti-Squarate MOFs

  • Ferrando-Ferrero, Javier
  • Vos-Gracia, Miriam
  • Santoriello, Giuseppe
  • Voccia, Maria
  • Farnesi Camellone, Matteo
  • Caporaso, Lucia
  • Horcajada, Patricia
  • Carrasco, Sergio
  • Marta
  • Fernandes-de Almeida, Vitor
  • Garcia-Baldovi, Hermenegildo
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Herein, defect engineering strategies were applied to enhance the photocatalytic activity of squarate-based MOFs (IEF-11) for green hydrogen generation via water splitting. The textural properties of pristine IEF-11(Ti) were significantly improved using microwave (MW)-assisted synthesis, leading to a four-fold increase in surface area (350 m2 g-1) due to the formation of mesopores associated with defect aggregation, primarily arising from linker vacancies (24%). Vanadium doping (0-100%) progressively reduced the optical band gap (2.44-1.87 eV), shifting absorption toward the visible region. The IEF-11 series was evaluated as photocatalysts for the hydrogen evolution reaction under simulated sunlight irradiation, revealing a volcano-type trend correlating activity with V content. Doped with 11% V, the MW-synthesized IEF-11(Ti0.89V0.11)_MW solid exhibited the highest activity (1053 vs. 536 mu mol g-1 h-1 H2 for IEF-11(Ti)), attributed to optimized band alignment, enhanced charge separation, and structural robustness. It also showed activity in photocatalytic overall water splitting (83 mu mol g-1 h-1 H2, 30% higher than the undoped IEF-11(Ti)). Theoretical calculations further confirmed band gap narrowing and the generation of new electronic states upon V-doping, facilitating charge transfer and reducing electron-hole recombination. These findings highlight the relevance of inducing artificial porosity and V-doping of IEF-11(Ti) to prepare efficient MOF-based photocatalysts. Importantly, this work not only reports the first V-squarate frameworks but also represents one of the first systematic studies addressing the effect of metal doping in MOFs for photocatalytic water splitting, achieving competitive efficiencies operating in the absence of cocatalysts., M.V.-G., H.G., S.N., P.H., and S.C. acknowledge HYLIOS project (CPP2022-010052), J.F.-F., S.C., and P.H. acknowledge NAPOLION project (PID2022-139956OB-I00) and HYDRAGON project (PCI2025-163274) and S.N. thanks the support received from Grant PID2024-155324OB-I00, all funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. J.F.-F. acknowledges the PhD grant from the Community of Madrid (PIPF-2023/ECO-29763). M.G.-F. thanks the PhD financial support of PRE2022-101327. V.F. thanks support from Generalitat Valenciana for a Santiago Grisolia (CIGRIS/2021/096) scholarship. H.G.B. thanks the support of grant number RYC2022-037287-I funded by MCIN/AEI/1013039/501100011033. G.S. and L.C. gratefully acknowledge the italian MUR for funding via the PRIN 2022 project "MATISSE" (2022K5SX27). We also thank CINECA for providing computational resources through the ISCRA C projects "SCORPION" and "COSACCO". H.G. thanks financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PDI2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). We acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities and Momentum Transfer for facilitating the diffraction measurements. Jakub Drnec is thanked for assistance and support in using beamline ID31. The measurement setup was developed with funding from the European Union's Horizon 2020 research and innovation program under the STREAMLINE project (grant agreement ID 870313). Measurements performed as part of the MatScatNet project were supported by OSCARS through the European Commission's Horizon Europe Research and Innovation programme under grant agreement No. 101129751.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

Synthesis of anodized WO3 nanocatalysts using Melia azedarach leaves extract for energetic applications [Dataset]

  • Fernández Domene, Ramón Manuel
  • Solsona Espriu, Benjamin Eduardo
  • Erans Moreno, María
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Sánchez Tovar, Rita
This study reports the bio-mediated synthesis of tungsten trioxide nanostructures from aqueous extracts of Melia azedarach (L.) dry leaves. The synthesis was carried out by electrochemical anodization of tungsten foils in the presence of different volume percentages of leaves extracts. These nanostructures were afterwards characterized by X-Ray Diffraction (XRD), impedance measurements and linear sweep voltammetry in the presence of simulated solar light. Finally, these nanoelectrodes were used as (photo)electrocatalysts in the photoelectrochemical water splitting process to obtain green hydrogen and as anodes in Li-ion rechargeable batteries. Description of methods used for collection/generation of data: - Synthesis of WO3 nanostructures: The leaves of M. azedarach were randomly sampled from several mature trees from the surroundings of the Burjassot Campus of the University of Valencia (Spain). Fresh leaves were rinsed with tap and distilled water and subsequently air-dried indoors for 1 week, at room temperature. The extracts were obtained from dried leaves, by mixing 15 g of material with 150 mL of distilled water at 60 ºC. The infusion was maintained at that temperature for 20 min. After that, the solution, once cooled, was filtered through filter paper and used to prepare the different reaction media. Nanostructures of WO3 were synthesized by subjecting tungsten foils (1,3 cm2 of exposed area) to an anodization process with a cell potential of 20 V, for 4 h. A platinum foil served as the cathode within the cell. The anodization process employed an aqueous electrolyte composed of 1.5 M methanesulfonic acid (MSA) with varying proportions of M. azedarach leaves extract (from 0% to 10%, in volume), at a temperature of 50◦C. Anodization was performed under controlled hydrodynamic conditions, by means of a Rotating Disk Electrode (RDE) set a constant rotation speed of 750 rpm. Following anodization, a thermal treatment (annealing) was carried out in a tubular oven at 600◦C for 4 h in an air atmosphere to obtain crystalline WO3 nanostructures. - Morphological and structural characterization: X-Ray diffraction analyses (XRD) were performed to investigate the crystallinity of the WO3 samples. A D8AVANCE diffractometer (Bruker) equipped with a monochromatic Cu Kα1 source was used. -(Photo)electrochemical characterization: impedance measurements and photocurrent density vs potential curves: Electrochemical characterization of the WO3 nanostructures was conducted through impedance measurements, performing Electrochemical Impedance Spectroscopy (EIS) and Mott-Schottky (MS) analyses. All electrochemical tests were carried out using a three-electrode cell with the nanostructures acting as working electrodes, a silver/silver chloride (3 M KCl) electrode was the reference electrode and a platinum tip served as counterelectrode. Measurements were performed with a PalmSens4 potentiostat and 0.1 M H2SO4 was used as electrolyte. The sample area exposed to that electrolyte was 0.5 cm2. For EIS, a constant potential of 1 V was selected with an amplitude of 10 mV, scanning the frequency from 100 kHz to 10 mHz. For MS analysis, a constant frequency of 5 kHz was used, while the potential was scanned from 1 V to 0.2 V at a rate of 50 mV/s. For the photoelectrochemical characterization of the WO3 nanostructures, the same experimental set-up was used, with the addition of a solar simulator with AM 1.5 conditions (100 mW/cm2). Linear voltammetries to obtain photocurrent density – potential curves were conducted from 0.2 V to 1.05 V, by applying dark-light pulses (16 s in the dark followed by 4 s with illumination) while the potential was scanned. - Evaluation of WO3 nanostructures as Li-ion battery anodes: WO3 nanostructures were evaluated as anodes (negative electrodes) for Li-ion batteries. For that purpose, Swagelok-type cells were used, with WO3 nanostructures acting as working electrodes and a metallic lithium foil acting as both the counter and the reference electrodes. Batteries were assembled inside an Ar-filled glove box, using 1 M LiPF6 in ethylene carbonate/dimethyl carbonate/diethyl carbonate 1:1:1 (v/ v/v) as electrolyte (Sigma-Aldrich) and a Whatman glass microfiber separator. After sealing the cells, they were cycled outside the glove box at room temperature, using a Biologic BCS-815 cyclic station. Galvanostatic charge/discharge curves were recorded at different cycling rates (from C/10–1 C, and returning to C/10) within a potential window between 1 V and 3.5 V vs Li/Li+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Early Physiological and Gut Microbiota Responses to Dietary Fishmeal Reduction in Mugil cephalus Under Biofloc Technology

  • Brol, Jéssica
  • Tomas-Vidal, A.|||0000-0002-2985-9324
  • Olivares-Perona, Ruben|||0009-0000-8374-5056
  • Rodilla, M|||0000-0001-6767-5676
  • Falco, S.|||0000-0002-8679-9153
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
  • Peñaranda, D.S.|||0000-0002-0861-976X
  • Carbó, Ricard
  • Gisbert, Enric
[EN] The early intestinal response of Mugil cephalus to fishmeal replacement with alternative protein sources under biofloc technology (BFT) was assessed. Juvenile mullet (82.68 +/- 0.05 g) were distributed among three dietary treatments with decreasing fishmeal inclusion levels of 15%, 5%, and 0%, corresponding to FM15, FM5, and FM0, respectively. After 27 days of feeding, intestinal samples were analyzed for microbiota composition, transcriptomic responses and enzymatic activity. The FM0 group exhibited reduced intestinal enzyme activity, whereas no significant differences were observed in terms of gut microbiota among the diets. Furthermore, transcriptomic analysis revealed differentially expressed genes associated with enriched GO terms and KEGG pathways related to lipid metabolism. This response was consistent with the lower mesenteric fat indices and whole-body lipid content observed in fish fed the FM0 diet, suggesting an early metabolic adjustment associated with complete fishmeal replacement and the higher dietary protein content. All diets exhibited high protein efficiency ratios (9.98 +/- 2.42) and low feed conversion ratios (0.40 +/- 0.17), with no significant differences observed among them. However, complete fishmeal replacement negatively affected intestinal physiology and lipid storage, indicating that these alterations were not fully compensated for by the biofloc system and may not be physiologically sustainable over longer periods. Further studies over an extended period could be carried out to evaluate the long-term effects of these diets., This work was supported by Grant TED2021-129272B-C21, funded by MICIU/AEI/10.13039/501100011033, and by the European Union NextGenerationEU/PRTR and the Generalitat Valenciana (GVA AICO/2021/198). J. Brol has a predoctoral grant from Generalitat Valenciana (Programa Santiago Grisolia 2021; CIGRIS/2021/109). R. Olivares-Perona has a technician contract that was funded by TED2021-129272B-C21. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Decyl-riboflavin: membrane-targeted lipophilic photosensitizer for lipid peroxidation and phototoxicity in HeLa cells under blue light irradiation

  • Ardila Padilla, Carlos A.
  • Uribe Mayor, M. Sol
  • Urrutia, Maria Noel
  • Thomas, Andres H.
  • Dantola, M. Laura
  • Layana, Carla
  • Vignoni, Mariana
  • Dillon, Macarena-Noeli
  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Andreu, Inmaculada|||0000-0003-3409-9443
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Photodynamic therapy (PDT) exploits the controlled generation of reactive species to selectively destroy target cells, offering a minimally invasive alternative to conventional cancer and antimicrobial treatments. A key determinant of PDT efficacy is the ability of the photosensitizer (PS) to localize within lipid membranes, where proximity to polyunsaturated lipids maximizes oxidative damage. Riboflavin (Rf, Vitamin B2) is a biocompatible, naturally occurring PS with absorption in the blue light range; however, its inherent hydrophilicity limits membrane interaction. Here, we report the photochemical and biological characterization of 3-decyl-riboflavin (decyl-Rf), a lipophilic Rf derivative designed to direct oxidative damage specifically to the lipid bilayer under blue LED irradiation. Decyl-Rf generates singlet oxygen (Type II) while simultaneously operating through a Type I mechanism. This dual capacity translates into extensive lipid peroxidation and membrane disruption in biomimetic systems, effects essentially absent for hydrophilic Rf. Interaction studies with serum albumin reveal strong ground-state complex formation, which markedly reduces cellular uptake under serum-containing conditions. In HeLa cells, decyl-Rf is efficiently internalized and localizes preferentially in lipid-rich compartments, inducing significant phototoxicity upon blue light irradiation. These results position decyl-Rf as a potent membrane-targeted PS, with its lipid peroxidation capacity suggesting a possible contribution to regulated cell death pathways and provide a mechanistic foundation for lipophilic flavin derivatives as next-generation agents for blue light PDT in oncological and antimicrobial applications., This work was partially supported by Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET, PIP 2023-0187), Agencia Nacional de Promocion Cientifica y Tecnologica (ANPCyT-Grants PICT 2019-3416 and 2020-3103) and Universidad Nacional de La Plata (UNLP-Grant 11/X975 and 11/X1021). Financial support from Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-24), the Spanish (projects PID2021-128348NB-I00, PID2024-162272NB-I00, Severo Ochoa Center of Excellence Program CEX2021-001230-S, funded by MCIN/AEI/https://doi.org/10.13039/5011 00011033/and "FEDER a way of making Europe") and regional (regional (grant CIGRIS/2022/091 to MD) governments is acknowledged. The authors thank CONICET and CSIC for supporting their collaboration through a Project of International Cooperation (DD216/25). CAAP thanks CONICET for doctoral fellowship. MSUM thanks Comision de Investigaciones Cientificas for graduate training fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the injection and filtration flow rates on the electrofiltration performance of three-dimensional porous Sb-SnO2 anodes

  • Carvalho-Rosa, Germano|||0009-0008-7942-4354
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Mestre, Sergio
[EN] Electrofiltration is an emerging electrochemical technique that enables simultaneous filtration and advanced oxidation for water treatment, offering improved control over mass transport and surface activation compared with conventional electrochemical process. Ceramic 3D Sb-doped SnO2 porous electrodes have been proven to be suitable electrofiltration anodes. In this work, the impact of hydrodynamics on the electrochemical behavior and oxidizing capability of such electrofiltration anodes was investigated. Cyclic voltammetry revealed that, without filtration, the system behaves as a quasi-2D flow-by electrode with low internal resistance, limited electroactive area and low oxygen evolution potential at high injection flow. Under filtration, the system behaves as a 3D flow-through electrode exhibits a higher ohmic resistance for all the tested flow rates, an anodic shift of the oxygen evolution potential and a higher activated area. The ability to generate hydroxyl radicals was assessed by salicylic acid electrofiltration and quantification of 2,5- dihydroxybenzoic acid and 2,3-dihydroxybenzoic acid, confirming that hydroxyl radical production at 20 L/h is effective both, without filtration and with filtration; whereas at 60 L/h it is strongly hindered in flow-by mode and only partially recovered under flow-through operation. These findings highlight the critical role of hydrodynamics in electrofiltration with porous ceramic Sb¿SnO2 anodes and provide a mechanistic link between flow regime, electrochemical response and radical-mediated oxidation performance., The authors are greatly thankful to the Generalitat Valenciana (Project GVA-THINKINAZUL/2021/013), the European Union NextGeneration EU/PRTR. G. Carvalho-Rosa thanks the Generalitat Valenciana (Santiago Grisolía scholarship CIGRIS/2021/037) for funding this research. J.J. Giner-Sanz is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and to the Agencia Estatal de Investigacion, for their support by a Juan de la CiervaIncorporacion ¿ fellowship (IJC2020-044087-I) funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The Article Processing Charges (APCs) were covered by the transformative agreements between CRUE-Universitat Politecnica de Valencia and Elsevier.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of Cysteine Fluorophore Conjugates by Visible-Light-Promoted Thiol Ene Coupling Using Organic Photocatalysts

  • Bellaizac-Riascos, Angie Julieth
  • Ortiz Serna, Mª Pilar
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Encinas Perea, Susana|||0000-0001-5275-8436
  • Jiménez, M Consuelo|||0000-0002-8057-4316
[EN] In this work, we have investigated the visible-light-mediated thiol¿ene coupling of N-acetyl-L-cysteine methyl ester with structurally distinct alkene-functionalized fluorophores using metal-free organic photocatalysts under mild conditions. The fluorophore set com prised naphthalene, naphthalimide, and aromatic diimide derivatives featuring different alkene environments and linker architec tures. The transformations were promoted under mild and metal-free conditions using five organic photocatalysts belonging to three distinct structural families, namely acridinium salts, BOPHY derivatives, and xanthene dyes. The methodology proved to be compati ble with structurally diverse fluorophore architectures and enabled the efficient preparation of both mono- and bis-functionalized cysteine conjugates. Reaction efficiency was influenced by fluorophore structure and photocatalyst identity, with yields reaching up to 95% for styrenyl naphthalimide derivatives. Sequential thiol¿ene additions were successfully achieved for divinyl fluorophores, pro viding access to doubly functionalized products under the same reaction conditions. Photophysical studies demonstrated that cysteine incorporation generally preserves the absorption and emission characteristics of the parent fluorophores and, in several cases, leads to enhanced fluorescence quantum yields. These results establish visible-light-mediated thiol¿ene coupling as a straightforward and versatile approach for the preparation of fluorescent cysteine building blocks from structurally diverse fluorophore scaffolds., This study was supported by Agencia Estatal de Investigación (PID2022- 138189NB-I00), Generalitat Valenciana (CIGRIS/2022/027), and European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Investigation on the Use of 2D-DOST on Time Frequency Representations of Stray Flux Signals for Induction Motor Fault Classification Using a Lightweight CNN Model

  • Díaz-Saldaña, Geovanni
  • Biot-Monterde, Vicente|||0000-0002-8229-7447
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Morales-Velazquez, Luis
[EN] Condition monitoring and fault detection in induction motors (IMs) are priorities in the industrial environment to secure safe conditions for the processes and production. Convolutional Neural Networks (CNNs) are gaining interest in these tasks as they allow automatic extraction of features from the inputs, sometimes Time¿Frequency Distributions (TFDs) obtained with various transforms, directly into large models for data classification. This work presents a proposal for the application of a widely used texture analysis tool in the medical field, the 2D Discrete Orthonormal Stockwell Transform (2D-DOST), to improve the accuracy of a lightweight CNN when using different TFDs and comparing the results to the use of the TFDs in RGB and grayscale. The results show that the use of the 2D-DOST improves the classification accuracy in a two to five percent range for all motor conditions under study, while having minimal variations to the training times when compared to RGB or grayscale images, opening the possibility for the use of image processing tools on TFDs to improve automatic feature extraction while using small CNN models., This research was funded by the Spanish "Ministerio de Ciencia e Innovacion", Agencia Estatal de Investigacion and FEDER program in the framework of the "Proyectos de Generacion de Conocimiento 2021" of the "Programa Estatal para Impulsar la Investigacion Cientifico-Tecnica y su Transferencia", belonging to the "Plan Estatal de Investigacion Cientifica, Tecnica y de Innovacion 2021-2023" (ref: PID2021-122343OB-I00). The authors also thank Generalitat Valenciana for supporting part of this research in the context of the "Subvenciones del programa Santiago Grisolia" (Grant CIGRIS/2023/149).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of microbiota signatures in Iberian pig strains using machine learning algorithms

  • Azouggagh, Lamiae
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
  • Martínez-Álvaro, Marina|||0000-0003-2295-5839
  • Casto-Rebollo, Cristina|||0000-0003-4646-345X
  • Varona, Luis
  • Casellas, Joaquim
  • Negro, Sara
[EN] BackgroundThere is a growing interest in uncovering the factors that shape microbiome composition due to its association with complex phenotypic traits in livestock. Host genetic variation is increasingly recognized as a major factor influencing the microbiome. The Iberian pig breed, known for its high-quality meat products, includes various strains with recognized genetic and phenotypic variability. However, despite the microbiome's known impact on pigs' productive phenotypes such as meat quality traits, comparative analyses of gut microbial composition across Iberian pig strains are lacking. This study aims to explore the gut microbiota of two Iberian pig strains, Entrepelado (n = 74) and Retinto (n = 63), and their reciprocal crosses (n = 100), using machine learning (ML) models to identify key microbial taxa relevant for distinguishing their genetic backgrounds, which holds potential application in the pig industry. Nine ML algorithms, including tree-based, kernel-based, probabilistic, and linear algorithms, were used.ResultsBeta diversity analysis on 16 S rRNA microbiome data revealed compositional divergence among genetic, age and batch groups. ML models exploring maternal, paternal and heterosis effects showed varying levels of classification performance, with the paternal effect scenario being the best, achieving a mean Area Under the ROC curve (AUROC) of 0.74 using the Catboost (CB) algorithm. However, the most genetically distant animals, the purebreds, were more easily discriminated using the ML models. The classification of the two Iberian strains reached the highest mean AUROC of 0.83 using Support Vector Machine (SVM) model. The most relevant genera in this classification performance were Acetitomaculum, Butyricicoccus and Limosilactobacillus. All of which exhibited a relevant differential abundance between purebred animals using a Bayesian linear model.ConclusionsThe study confirms variations in gut microbiota among Iberian pig strains and their crosses, influenced by genetic and non-genetic factors. ML models, particularly CB and RF, as well as SVM in certain scenarios, combined with a feature selection process, effectively classified genetic groups based on microbiome data and identified key microbial taxa. These taxa were linked to short-chain fatty acids production and lipid metabolism, suggesting microbial composition differences may contribute to variations in fat-related traits among Iberian genetic groups., LA gratefully acknowledges the receipt of the GRISOLIA scholarship [CIGRIS/2021/098] awarded by the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A tomato MAGIC population reveals candidate genes for leaf dry matter and phenolics, two key traits for stress resilience and climate-smart breeding

  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Antar, Oussama|||0009-0004-7224-6752
  • Solana-Garcia, Andrea|||0000-0002-1071-7625
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Pereira-Dias, Leandro|||0000-0002-6246-0294
  • Kleftogianni, Konstantina
  • Bebeli, Penelope J.
  • Papasotiropoulos, Vasileios
[EN] Increasing leaf dry matter and phenolic content in tomato has the potential to enhance plant resilience, a key requirement for food security and sustainable agriculture in the context of climate change. However, phenolics accumulation in vegetative tissues remains understudied, as does dry matter accumulation. To address this gap, we leveraged 293 recombinant lines of an eight-way Tomato Multi-Parent Advanced Generation Inter-Cross (ToMAGIC) population to identify candidate genes for leaf dry matter and phenolic content. We found significant variation among lines. Leaf dry matter ranged from 6.90 to 23.20% (CV = 24.84%). Substantial variation was also observed for specialized phenolic metabolites, showing larger differences among lines compared with dry matter. Chlorogenic acid, the most abundant phenolic, ranged from 0.18 to 6.77 g kg-& sup1; FW (CV = 76.1%), followed by rutin (0.026-0.352 g kg-& sup1; FW, CV = 45.1%), quercetin (0.008-0.141 g kg-& sup1; FW, CV = 49.9%), and kaempferol (0.003-0.032 g kg-& sup1; FW, CV = 48.8%). Total phenolic content averaged 3.65 g kg-& sup1; FW, with nearly a 20-fold range (0.47-8.36 g kg-& sup1; FW) (CV = 45.3%). The emergence of highly divergent phenotypes suggests extensive recombination in the population. Traits were highly correlated with each other, with rho ranging from 0.35 to 0.77, supporting the possibility of indirect selection and suggesting common genetic regulation. Likewise, genomic heritability estimates were moderate to low, where chlorogenic acid presented the highest value (H2 = 0.66) and kaempferol the lowest (H2 = 0.07). GWAS identified 6 significant associations, explaining 4.50% to 28.24% of the phenotypic variation which, upon further study, enabled the prioritization of candidate genes potentially involved in the control of leaf dry matter and chlorogenic acid content. These findings demonstrate the potential of the ToMAGIC population to facilitate the development of climate-smart tomatoes with improved resilience and reduced input requirements., The author(s) declared that financial support was received for this work and/or its publication. This work was funded by a grant under the program "Ayuda a Primeros Proyectos de Investigacion" (PAID-06-22) from the Vicerrectorado de Investigacion of the Universitat Politecnica de Valencia (UPV), by MAGICPIMPCERAS (PID2020-118627RB-I00), funded by MICIU/AEI/10.13039/501100011033, by CIPROM/2021/020, funded by Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital of the Generalitat Valenciana, and by the HARNESSTOM innovation action (grant agreement no. 101000716), funded by the European Commission H2020 Research and Innovation Programme. L.P.-D. is grateful to the Spanish Ministerio de Universidades for a Margarita Salas postdoctoral grant funded by the European Union NextGenerationEU plan. A.A. is grateful to Spanish Ministerio de Ciencia, Innovacion y Universidades for a predoctoral (FPU18/01742) contract. A.S. is grateful to Spanish Ministerio de Ciencia e Innovacion for a predoctoral grant (PRE2022-102368) funded by MCIN/AEI/10.13039/501100011033 and FSE +. O.A. is grateful to Conselleria d'Innovacio, Ciencia i Societat Digital of the Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia program (CIGRIS/2022/113). P.G. is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical Simulation of the Behavior of Reinforced UHPFRC Ties Considering Effects of Tension Stiffening and Shrinkage

  • Mezquida Alcaraz, Eduardo José
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] Highlights What are the main findings? The developed non-linear finite element model (NLFEM) enables reliable prediction of shrinkage strain range in reinforced UHPFRC ties. The NLFEM reliably reproduces the tension-stiffening behavior of reinforced UHPFRC ties using average parameters derived from a simplified four-point-inverse analysis (4P-IA) method. What is the implication of the main findings? This study aims to develop a reliable and direct design procedure for UHPFRC, ensuring consistency from material characterization to structural application. Shrinkage effects are crucial and must be addressed in the design of reinforced UHPFRC elements under serviceability conditions.Highlights What are the main findings? The developed non-linear finite element model (NLFEM) enables reliable prediction of shrinkage strain range in reinforced UHPFRC ties. The NLFEM reliably reproduces the tension-stiffening behavior of reinforced UHPFRC ties using average parameters derived from a simplified four-point-inverse analysis (4P-IA) method. What is the implication of the main findings? This study aims to develop a reliable and direct design procedure for UHPFRC, ensuring consistency from material characterization to structural application. Shrinkage effects are crucial and must be addressed in the design of reinforced UHPFRC elements under serviceability conditions.Abstract This study presents a reliable methodology for analyzing reinforced ultra-high-performance fiber-reinforced concrete (UHPFRC) elements by linking material behavior to structural performance. A non-linear finite element model (NLFEM) is proposed to simulate the tensile response of reinforced UHPFRC elements, with particular emphasis on shrinkage effects. The model operates in two phases: the first simulates shrinkage during specimen storage and the second simulates the mechanical tensile test, using the internal stresses from the first phase as initial conditions. The model was validated through an experimental program involving reinforced UHPFRC ties. The NLFEM accurately reproduced the load-displacement response using average UHPFRC tensile parameters obtained from a simplified Four-Point bending test Inverse Analysis method (4P-IA). It reliably predicted the shrinkage strain range and its impact on stiffness loss during microcrack initiation and stabilization, where tension-stiffening behavior is critical. Additionally, the simulation from the model captured the transition from microcracking to macrocrack formation and the role of fiber bridging in maintaining stiffness. The predicted shrinkage strain aligns with values reported in the literature and represents a conservative upper bound, neglecting the potential effects of creep and relaxation. Overall, the NLFEM effectively simulates the full tension-stiffening behavior of reinforced UHPFRC, including three-dimensional effects, and provides a reliable tool for structural analysis and design., This work is part of Project PreULight "CIAICO/2022/045", supported by the "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (ES)" and Project PID2023-149364OB-I00/AEI/10.13039/501100011033 funded by the Agencia Estatal de Investigacion (State Research Agency) of Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multivariate evaluation of the printing process on 3D printing of rice protein

  • Barrios-Rodríguez, Yeison Fernando|||0000-0001-6244-8773
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] The combination of printing parameters appropriately improves the printability of 3D-printed foods. In this regard, the present study aims to evaluate the effect of 3D printing process parameters on protein food generation. Printability of a cylinder 3 cm in diameter and 1 cm in height using a protein mixture of rice water and xanthan gum with a ratio of 30:70:0.5 was evaluated in an extrusion printer with an XYZ system. A ¿ fractional factorial design was used with three factors: nozzle diameter (1.2 ¿ 2.2 mm), layer height (1.0 ¿ 2.0 mm), and print speed (20 ¿ 50 mm/s). Each combination of factor levels was performed in triplicate for 12 runs plus three central points. Print time (min), sample weight, change in diameter (%), change in height (%), change in volume (%), mass flow rate (mg/s), appreciation (qualitative variable), and textural and rheology characters were obtained as response variables. The linear effects of the factors and combination factors were evaluated by analysis of variance. Additionally, a principal component analysis was performed to visualize the similarity between the observations and the relationship between the variables. The results showed that the layer height and nozzle diameter affect the printing accuracy concerning surface quality, shape stability, resolution, and layer layout. The nozzle with a diameter of 1.7 mm combined with speeds between 35 and 50 mm/s allowed the effects of overextrusion to be overcome, generating a better flow of the material. Low scores in the printability variable were related to low-speed values (20 mm/s) and a high nozzle diameter (2.2 mm), which generated higher deformations in the printed protein cylinder. Additionally, some printing conditions affected the textural and rheological characteristics, which allowed inferring that the capacity of the protein mass to store and recover energy in compression processes is conditioned by the printing parameters., This work was supported by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number AICO/2021/137, project AGROALNEXT/2022/001, and from MCIN/AEI/10.13039/501100011033/through project PID2020-115973RB-C22 and the FPI Ph.D. contract granted by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number CIGRIS/2021/105
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of CuOx nanostructures in novel electrolytes under hydrodynamic conditions for photoelectrochemical applications

  • Sánchez-García, G.
  • Pérez-Calvo, A.
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Solsona, B.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
[EN] In this work, CuOx (x = 1 and 2) nanostructures have been synthesized by electrochemical anodization in ethylene glycol based electrolytes using oxalic acid or NaF (with or without NaOH) as complexing agents. The influence of hydrodynamic conditions and time during anodization of copper have also been evaluated. A comprehensive morphological, structural, electrochemical and photoelectrochemical characterization of the nanostructures has been performed. The results revealed the convenient use of oxalic acid and 250 rpm for 5 minutes during electrochemical anodization to obtain homogeneous CuOx nanostructures formed by spheres with Cu2O as a predominant phase. Using this nanostructure as a photocathode for N2O photoelectron-reduction, almost 100% of N2O removal was achieved after 1 h, showing the improvement of the photoelectrochemical approach vs. the photo or the electro performance, The authors would like to acknowledge the Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion through the projects PID2021-126235OB-C33 and TED2021-129555B-I00. The authors also thank the Generalitat Valenciana for CIAICO/2021/094, CIGRIS/2022/198, and CIGE/2022/166 and for the financial support (CIACIF/2021/010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Green electrochemical fabrication of WO3 nanostructures using Cistus extracts for enhanced photoelectrocatalytic degradation of ciprofloxacin

  • Rosello-Marquez, Gemma
  • Da Silva, Elianny
  • Solsona, Benjamín
  • Sanchez-Tovar, Rita
  • Fernandez-Domene, Ramon M.
  • García-García, D.M.|||0000-0001-8951-4558
[EN] The development of sustainable fabrication routes for advanced semiconductor materials is crucial for environmental technology. This work presents a green electrochemical anodization strategy to fabricate tungsten trioxide (WO3) nanostructures, employing aqueous extracts of two Mediterranean plants, Cistus monspeliensis and Cistus albidus, as environmentally benign electrolytes. Nanostructures synthesized with varying extract percentages were comprehensively characterized by field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and electrochemical impedance spectroscopy measurements. Their performance was evaluated in photoelectrocatalytic (PEC) tests under simulated sunlight. The WO3 nanostructures anodized in the presence of optimal concentrations (7%) of C. monspeliensis and C. albidus extracts demonstrated superior properties. These optimal samples were then applied to degrade ciprofloxacin, a persistent antibiotic pollutant. The C. albidus-derived photoelectrocatalyst exhibited markedly higher efficiency, achieving a degradation rate constant of 1.76 h-1, which is four times faster than the 0.43 h-1 constant obtained for the C. monspeliensis-based sample. This study confirms that plant extracts can effectively tune the properties of anodized WO3 and introduces Cistus albidus extract as a particularly effective green agent for fabricating high-performance PEC materials for the removal of emerging water pollutants, using a green fabrication process to create high-performance materials for environmental cleanup., Authors would like to acknowledge the Generalitat Valenciana for CIAICO/2024/087 and CIGRIS/2022/198. Thanks to SCSIE-UV for assistance in characterization of materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

Effects of Chlorella sp. and bacterial probiotics in biofloc systems for white shrimp [Dataset], Combined and Individual Effects of Chlorella sp. and Bacterial Probiotics in Biofloc Systems for White Shrimp (Penaeus vannamei)

  • Cascales Martos, Tatiana
Biofloc technology is an increasingly used strategy for more sustainable shrimp farming. However, new approaches are still needed to improve water quality and animal health. In this study, we evaluated the effects of the green microalga Chlorella sp. and a commercial probiotic, applied separately or in combination, in a biofloc system for Pacific white shrimp culture. A single inoculation of Chlorella sp. maintained a stable population for approximately 40 days. The microalga contributed to nutrient bioremediation in water and increased the nutritional value of the biofloc, a natural food source for shrimp. However, shrimp reared in microalgae treatments showed lower growth performance and survival, which may have been associated with prolonged exposure to the elevated nitrate levels associated with microalgae inoculation. In contrast, the probiotic and control treatments showed comparable zootechnical performance, and both outperformed the microalgae treatments. Probiotic supplementation also reduced the abundance of Flavobacteriaceae, a bacterial family proposed as a bioindicator of White Feces Syndrome (WFS). Overall, these findings suggest that microalgae have considerable potential to improve the sustainability of biofloc systems, provided that the inoculation protocol should be optimized, and confirm the probiotic as an effective strategy to enhance shrimp productivity and health., The authors would like to thank the technical staff of the Aquaculture Laboratory of the Universitat Politècnica de València for their assistance during the experimental work. We would also like to sincerely thank João Rito for his invaluable help and support throughout the entire experimental process.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

CuOx nanostrutures synthesized under hydrodynamic conditions photoelectrochemical applications [Dataset]

  • Sánchez García, Germán
  • Pérez Calvo, Alberto
  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Sánchez Tovar, Rita
  • Solsona Espriu, Benjamin Eduardo
CuOx (x = 1 and 2) nanostructures have been synthesized by electrochemical anodization in ethylene glycol based electrolytes using oxalic acid or NaF (with or without NaOH) as complexing agents. The influence of hydrodynamic conditions and time during anodization of copper have also been evaluated. An electrochemical and photoelectrochemical characterization of the nanostructures has been performed.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cooperative driving for automated vehicles: a two-layer algorithm in a full context awareness mixed traffic scenario

  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Nakaema-Aronis, Andre|||0000-0001-9599-7736
  • Trintinaglia-Perin, Augusto|||0000-0002-4915-2852
[EN] Driving advisory usually require a-priori information about the route, which can be provided by context awareness technologies, such as vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) connectivity. This study presents a cooperative driving algorithm by formulating an optimal control problem (OCP) and solving it with a non-linear Model Predictive Control (MPC) approach with two steps. First, the OCP is solved by Dynamic Programming (DP), providing the cost-to-go (CTG) from any pair time-state to the end of the problem. The CTG can be used as a terminal cost for the MPC to be solved recursively during the route considering traffic as a disturbance in a short horizon. Secondly, the optimization is solved iteratively: at any time-step the first vehicle is solved assuming that the rest follow the traffic prediction algorithm. The process continues sequentially until all the vehicles have been solved, while the traffic prediction is replaced by the optimal trajectories of the vehicles that have been previously computed. Different prediction horizons, mixed traffic levels and the scheduling policy to solve the different vehicles are evaluated. Results suggest that the cooperative driving algorithm can reduce the fleet fuel consumption by up to 35%, while covering the same route in a similar time., This research has been partially funded by the Agencia Estatal de Investigacion of Spain through the project PID2020-119691RB-I00, entitled Mantenimiento Y Control Optimo De Vehiculos Hibridos De Transporte Urbano Mediante Datos Del Contexto Operacional and by the Conselleria d Innovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana with the funding program Santiago Grisolıa (GRISOLIA/2023-CIGRIS/2022/065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Downsize Effect on Photocatalytic Syngas Production of a 2D Metal Organic Framework-Tuning the Selectivity From HER to CO2RR via Dimensional Modulation and Mechanical Exfoliation of 2D Metal-Organic Layers

  • Saha, Rajat
  • Molina-Muriel, Manuel
  • Deniz, Fernando
  • Changarath, Mahesh Eledath
  • Ribera, Antonio
  • Benmansour, Samia
  • Sanchez-Royo, Juan F.
  • Canet-Ferrer, Josep
  • Ray, Debmalya
  • Garcia, Carlos J. Gomez
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Tuning the selectivity from hydrogen evolution reaction (HER) to CO2 reduction reaction (CO2RR) is a challenge in heterogeneous photocatalytic CO2 reduction by water as the proton source. The chemical inertness of CO2 and multiple proton-coupled electron transfer for CO2RR favor HER over CO2RR. To favor CO2RR, here we show the effect of downsizing the 2D Co-containing metal-organic framework (MOF) [Co(pdc)(H2O)(2)]& centerdot;H2O (2D) (pdc(2-) = 2,5-pyridinedicarboxylate) on its photocatalytic CO2RR performance. MOF 2D has been downsized in two ways: covalent bond breaking, leading to the 1D MOF [Co(pdc)(H2O)(2)]& centerdot;4H(2)O (1D), and supramolecular bond breaking of the metal-organic layers (MOLs) by liquid phase exfoliation (2D-ex). Structural analysis reveals that the Co-II centers have an octahedral geometry in 2D and a square pyramidal geometry in 1D, resulting in open metal sites. X-ray photoelectron spectroscopy (XPS) indicates that acetonitrile molecules are attached to the metal centers in 2D-ex, replacing some coordinated water molecules. Photocatalytic activity shows that these materials produce syngas with a tunable range of CO:H-2 ratio depending on the structure. Thus, 2D produces a higher proportion of H-2, whereas 1D and 2D-ex show a CO-enriched syngas. Theoretical studies show the relationship between the photocatalytic activity of these MOF and adsorption energies of CO2., This study forms part of the Advanced Materials program and was supported by the Spanish MCIN with funding from European Union NextGeneration EU (PRTR- C17.I1) and the Generalitat Valenciana (projects CIPROM/2022/060, CIPROM/2024/04, CIPROM/2024/071 MFA-2022-057, MFA-2022-017, MFA-2022-009, and MFA-2022-031). We also thank the Grants PID2023-146181OB-I00, PID2024-160147NB-I00, PID2024-161014NB-I00 funded by MCIN/AEI/ 10.13039/501100011033, CEX-2021-001230-S and Maria de Maeztu CEX2021-001202-M, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" M. E. C. acknowledges financial support from the Santiago Grisolia Program of the Generalitat Valencia (grant CIGRIS/2021/150). D.R. acknowledges start-up fund provided by Monmouth University. The computational research used resources of the National Energy Research Scientific Computing Center; a DOE Office of Science User Facility supported by the office of Science of the U.S. Department of Energy under the Contract No. DE-AC02-05CH11231 using NERSC award BES-ERCAP0033005. M.M. acknowledges the funding received through the European Union's Next GenerationEU funds, articulated at the national level by the Recovery, Transformation and Resilience Plan.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of geometric fidelity in protein-based 3D printing via coupled pressure-flow dynamics

  • Barrios-Rodríguez, Yeison Fernando|||0000-0001-6244-8773
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] In extrusion-based food 3D printing, geometric fidelity depends not only on the material's rheological properties but also on the stability of pressure-flow dynamics during deposition. This study aimed to interpret the 3D printing process of a rice protein ink through coupled pressure-flow dynamics analysis and to evaluate the ability of partial least squares (PLS) and machine learning (ML) models to predict geometric fidelity. A 3(2) factorial design was implemented, with real-time extrusion pressure monitoring, flow, oscillatory, and apparent rheological characterization, and image analysis. Mass flow rate ranged from 9.23 to 66.64 mg/s, and maximum pressures ranged from 227 to 237 kPa at 50 mm/s, with AUC reductions of up to 71.4% when increasing nozzle diameter (0.85 to 1.55) at 20 mm/s. The results revealed that printability is governed by two independent mechanisms: lateral redistribution and vertical stability. Lateral expansions reached +19.37% in frontal area and + 17.52% in top area, while maximum height reduction was -12.85%. The combination of 1.55 mm nozzle at 50 mm/s achieved the highest global fidelity (PFI >97%). PLS models showed limited predictive capacity (R-2 = 0.21-0.33), whereas the Random Forest algorithm substantially outperformed them (R-2 = 0.82-0.91), identifying printing speed, mass flow rate, apparent viscosity, and pressure variability as dominant predictors. These findings confirm that geometric fidelity depends on the dynamic balance between volumetric supply and pressure stability, validating ML as a tool to resolve the multivariable complexity of food 3D printing., This work was supported by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number CIAICO/2023/173, MCIN/AEI through project PID2023-149275OB-I00, and the FPI Ph.D. contract granted by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number CIGRIS/2021/105.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical and photoelectrochemical oxidation processes for polystyrene microplastic treatment: BDD anode vs Sb-doped SnO2 ceramic anode coated with a CdFe2O4 photocatalytic layer

  • Medina-Casas, Martha Patricia|||0000-0003-4503-432X
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • García Martín, Gema
  • Mestre, Sergio
[EN] This study evaluates the efficiency of electrochemical and photoelectrochemical oxidation for the degradation of polystyrene (PS) microspheres using two types of anode materials: a commercial boron-doped diamond (BDD) anode and a ceramic tin oxide anode doped with antimony coated with a photoactive cadmium ferrite (CdFe2O4) layer. Experiments were conducted under different current intensities and illumination conditions to assess degradation efficiency. Both electrodes achieved significant PS removal, reaching up to 99¿% with the BDD anode and up to 96¿% with the cadmium ferrite anode under light exposure and 6¿h of treatment. The photoelectrochemical effect was evident in the cadmium ferrite system due to the photogeneration of additional oxidizing species under visible light. Kinetic parameters were calculated using nonlinear regression according to a modified Chamas model with a Monod-type saturation term. Mineralization was confirmed through total organic carbon analysis, and morphological changes were evidenced by scanning electron microscopy and Raman spectroscopy. The specific energy consumption (SEC) analysis revealed that, although the BDD anode exhibited higher efficiency at low applied current intensities, the cadmium ferrite anode represents a viable alternative due to its high removal efficiencies and energy consumption values comparable to those of the BDD anode at intermediate current intensities and due to its cost-effectiveness associated with its lower fabrication costs. These results highlight the potential of these ceramic anodes as a sustainable alternative for the treatment of wastewater containing microplastics., The authors are greatly thankful to the Agencia Estatal de Investigacion for the financial support through the grant (PID2023-147511OB-C21), funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. M. P. Medina-Casas thanks the Generalitat Valenciana (Santiago Grisolía scholarship CIGRIS/2021/035) for funding this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Emotion regulation intervention to promote well-being through a serious game (emoWELL): a study protocol for a randomised controlled trial in Spanish emerging adults

  • Velert-Jiménez, Saray
  • Sanchez-Sanchez, Hugo
  • Pérez Marín, Marian
  • Montoya-Castilla, Inmaculada
  • Gil-Gómez, José-Antonio|||0000-0001-9954-2480
[EN] Introduction: Emerging adulthood is a new life stage characterised by identity exploration, instability, self-focus, a feeling of 'being in-between' and the perception of a range of possibilities. Emerging adults may experience difficulties in their well-being during this complex stage. Adaptive emotion regulation can improve levels of well-being. Previous studies have shown that new technologies can enhance social-emotional competencies in this population. The purpose of the study is to design and implement a serious game, emoWELL, which improves knowledge and the use of adaptive skills of emotion regulation to improve well-being during emerging adulthood. Methods and analysis: The participants will be 385 emerging adults aged 18-29 years. They will be randomly assigned to either the control or experimental group. The experimental group will complete the emoWELL serious game. The game takes place on a train ride with several stops where the player will learn about emotion regulation. To assess the effectiveness of emoWELL, psychological assessment instruments validated in the Spanish population will be used. The primary expected outcomes include characteristics of emerging adulthood, emotion regulation (emotion dysregulation, emotion regulation strategies and cognitive reappraisal and expressive suppression) and psychological well-being. The secondary expected outcomes are self-esteem, psychological distress, loneliness and optimism. The assessment will occur at two different time points: pretest (T1) and post-test (T2) to observe improvements in the variables of interest. Ethics and dissemination: The study has been approved by the Ethics Committee of the Universitat de València (2013883) and will follow the standards of the Declaration of Helsinki for data collection. The findings will be shared with the scientific community. The intellectual property registration number is as follows: UV-SW-202460R., This research was supported by the grant PID2020-114425RB-C21, funded by MCIN/AEI/10.13039/501100011033, an FPU grant from the Spanish Ministry of Universities (FPU20/05797) and a Santiago Grisolia Program grant from the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana (CIGRIS/2022/168, CPI-23-277).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Green biomediated synthesis of anodized WO3 nanocatalysts using Melia azedarach leaves extract for the energetic transition: Solar hydrogen and Li-ion batteries

  • Fernández-Domene, Ramón M.
  • Solsona, Benjamín
  • Erans, María
  • Sánchez-Tovar, Rita
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
[EN] This study reports the bio-mediated synthesis of tungsten trioxide nanostructures from aqueous extracts of Melia azedarach (L.) dry leaves. The synthesis was carried out by electrochemical anodization of tungsten foils in the presence of different volume percentages of leaves extracts. These nanostructures were afterwards completely characterized by Field-Emission Scanning Electron Microscopy (FESEM), X-Ray Diffraction (XRD), High- Resolution Transmission Electron Microscopy (HR-TEM), impedance measurements, linear sweep voltammetry in the presence of simulated solar light and UV-Vis spectroscopy. Finally, these nanoelectrodes were used as (photo)electrocatalysts in the photoelectrochemical water splitting process to obtain green hydrogen and as anodes in Li-ion rechargeable batteries. Nanostructures fabricated with 5% M. azedarach leaves extract provided the best (photo)electrocatalytic behavior for both applications, since in that biogenic electrolyte, thin nanorods arranged in very porous and spongy layers were formed. Therefore, the significant increase in specific surface area found for nanostructures fabricated following this green route, in comparison with the blank sample (i.e., nanostructure formed following a non-green route), was essential to enhance their performance as promising efficient (photo)electrocatalysts., M. Erans is grateful for Grant RYC2021-031428-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. Authors would also like to acknowledge the Generalitat Valenciana for CIAICO/2021/094, CIGRIS/2022/198 and CIGE/2022/166. Authors also would like to acknowledge the Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion through the projects PID2021-126235OB-C33 MCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa, UE and TED2021-129555B-I00/AEI/10.13039/501100011033/Union Europea NextGenerationEU/PRTR. Thanks to SCSIE-UV for assistance in characterization of materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploration of changes in rheological and spectral properties of rice protein inks before and after 3D printing

  • Barrios-Rodríguez, Yeison Fernando|||0000-0001-6244-8773
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] The aim of this work was to understand the effect of the printing process on food inks by applying the chemometric approach to analyze the rheological and spectral properties of rice protein. Rice protein was printed under two conditions (speed: 35 and 50 mm/s, layer height: 1.5 and 1.2 mm, and nozzle diameter: 1.7 and 1.2 mm). Infrared spectroscopy and oscillatory tests at 1 Pa between 0.1 and 10 Hz were performed before and after printing. PCA and k-means analysis of rheological and spectral data identified patterns and significant differences. The analysis revealed that 3D printing affects rheological properties, reducing structural stiffness and modifying the relationship between elastic and viscous behavior. Spectral vibrations associated with NH, CH3, O-H, and C=O functional groups indicated significant structural changes due to the printing process. These results suggest that the printing process influences food inks' rheological and structural properties., This work was supported by Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number AICO/2021/137, project AGROALNEXT/2022/001, and from MCIN/AEI/10.13039/501100011033/through project PID2020-115973RB-C22 and the FPI Ph.D. contract granted by Conselleria de Innovacion, ¿ Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number CIGRIS/2021/105.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Light-induced structural rearrangements of axitinib and their role in phototoxic responses

  • El Ouardi, Meryem
  • do Carmo Linhares, Debora
  • Chen, Xiong
  • Hofkens, Johan
  • Miranda, Miguel A.
  • Álvarez-Satizabal, Alejandro|||0000-0002-4045-0642
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Andreu, Inmaculada|||0000-0003-3409-9443
[EN] Axitinib (AXT) is a second-generation tyrosine kinase inhibitor widely used in advanced renal cell carcinoma and currently explored in light-modulated therapies due to its E/Z photoisomerizable scaffold. Despite its clinical relevance and UVA absorption, the photobiological consequences of its light-induced structural rearrangements remain largely unexplored. Here, we elucidate the mechanistic basis of AXT phototoxicity by integrating photophysical characterization with cellular studies while distinguishing the roles of its (E)- and (Z)-isomers. Steadystate photolysis reveals that (E)-AXT undergoes photodegradation in aqueous media but preferentially isomerizes to (Z)-AXT in lipophilic environments, which is accelerated in the presence of human serum albumin (HSA). Conversely, (Z)-AXT displays medium-dependent photostability, being stabilized by HSA and reverting to the (E)-isomer in aqueous solution. Spectroscopic studies, including laser flash photolysis, support a mechanism involving tautomerization through excited-state intramolecular proton transfer and transient radical intermediates, consistent with predominant Type I photosensitization. Notably, (Z)-AXT is favored in lipophilic and protein-rich environments, likely through intramolecular hydrogen-bond stabilization of its 2H-tautomer. Cellular studies in keratinocytes revealed two complementary phototoxic pathways: photoinduced conversion of cytotoxic (Z)-AXT from (E)-AXT and the intrinsic phototoxicity of (Z)-AXT under irradiation. Although both isomers cause similar protein oxidation, (Z)-AXT is the main contributor due to its higher stability with HSA. While alkaline comet assays detected no direct DNA strand breaks, gamma-H2AX immunostaining revealed lightinduced DNA double-strand breaks. Overall, these findings identify (Z)-AXT as a previously unrecognized phototoxic species and establish a framework linking isomerization, microenvironmental stabilization, and Type I photosensitization in kinase inhibitors., Financial support from the Vicerrectorado de Investigacion of the Universitat Politecnica de Valencia (PAID-11-24) and the FPU predoctoral fellowship (FPU19/02201) from the Spanish Ministry awarded to M. El O. is gratefully acknowledged. We also thank Generalitat Valenciana for support through the Santiago Grisolia program (CIGRIS/2023/130), which enabled the contract of A. A.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Statistical comparison of the photoelectrochemical degradation of an antibiotic pollutant using two Sb-doped SnO2 ceramic anodes coated with photoactive CdFe2O4 and ZnFe2O4 layers

  • Medina-Casas, Martha Patricia|||0000-0003-4503-432X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Mestre, Sergio
[EN] In the present study, the electrochemical and photoelectrochemical responses of two Sb-doped SnO2 ceramic anodes were compared in the degradation of an emerging pharmaceutical pollutant, the antibiotic Norfloxacin. One anode was coated with a photocatalytic layer of cadmium ferrite (CdFe2O4), while the other one was coated with zinc ferrite (ZnFe2O4). A multifactorial analysis of variance (ANOVA) was used to assess the effect of the anode material, the applied current intensity and the presence or absence of light, on the degradation and mineralization kinetics. An initial electrochemical characterization of the electrodes was conducted using linear sweep voltammetry and light-pulsed chronoamperometry, confirming the photoactivity of these electrodes. The results revealed that at intermediate potential values (around 1.8 V vs. Ag/AgCl 3 M for cadmium ferrite anode and 2.4 V vs. Ag/AgCl 3 M for zinc ferrite anode), the largest photoactivity were observed. The degradation rate of Norfloxacin was positively influenced by the presence of light and by the increase in current intensity. Additionally, the combined effect of the electrode material and light presence resulted in higher final degradation values of the compound. The degradation kinetics of Norfloxacin were fitted using a mixed-order model (pseudo-zero order and pseudo-first order). The pseudo-zero order kinetic constant was positively influenced by all the considered factors and by the interaction between electrode material and light, and between current intensity and light, which resulted in higher constant values. All the studied factors had a positive effect on Norfloxacin mineralization. Additionally, the combined effect of the electrode material and current intensity showed a significant improvement in the final mineralization of the compound. Furthermore, it was confirmed that the mineralization current efficiency (MCE) decreases with increasing applied current intensity, but this decrease is lower when the electrode is exposed to light., The authors are greatly thankful to the Generalitat Valenciana (Project GVA-THINKINAZUL/2021/013), the European Union NextGeneration EU/PRTR. M. P. Medina-Casas thanks the Generalitat Valenciana (Santiago Grisolía scholarship CIGRIS/2021/035) for funding this research. J.J. Giner-Sanz is very grateful to the Ministerio de Ciencia e Innovacion, ¿ to the Next Generation EU, and to the Agencia Estatal de Investigacion, ¿ for their support by a Juan de la CiervaIncorporacion ¿ fellowship IJC2020-044087-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Game on: comparing stress reduction effects between emoWELL serious game and computer solitaire in emerging adulthood

  • Velert-Jiménez, S.
  • Sanchez-Sanchez, H.A.
  • Valero-Moreno, S.
  • Blasko Ochoa, I.
  • Montoya-Castilla, I.
  • Gil-Gómez, José-Antonio|||0000-0001-9954-2480
[EN] Emerging adulthood is often characterized by high stress levels due to instability in various life roles. The present study compares outcomes between a serious game area specifically designed for stress management and a conservative commercial off-the-shelf (COTS) approach, assessing both objective (heart coherence) and subjective (perceived stress) measures. Findings indicate that participants in the serious game group experienced significant improvements in heart coherence, with 43.3% showing reliable increases compared to 24% in the COTS group. Additionally, 36.7% of participants in the serious game group reported reductions in perceived stress, while only 8% in the COTS group did so. The moderation analysis revealed that individuals with higher emotion dysregulation experienced more pronounced benefits from the serious game. Feedback from participants highlighted various psychological benefits associated with the serious game, while COTS games were primarily viewed as tools for distraction and training executive functions. These results underscore the potential of serious games to enhance stress management strategies, especially for those struggling with emotion dysregulation. Both serious and COTS games can play complementary roles in stress management., This research was supported by the grant PID2020-114425RB-C21 funded by MCIN/ AEI /10.13039/501100011033, Santiago Grisolia Program; Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital; Generalitat Valenciana (Ref. CIGRIS/2022/168) CPI23 277. and the Spanish Ministry of Science, Innovation, and Universities under Grant FPU20/05797.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Morphological and biochemical responses to water stress in Solanum pimpinellifolium and S. lycopersicum var. cerasiforme accessions

  • Kabas, Aylin
  • Ustun, Hayri
  • Antar, Oussama|||0009-0004-7224-6752
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Vicente, Oscar|||0000-0001-5076-3784
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
[EN] Drought is a critical abiotic stress that negatively affects the growth and productivity of tomato (Solanum lycopersicum L.). In this study, we assessed the morphological and biochemical responses of plants from eight accessions of tomato relatives, four of Solanum pimpinellifolium (SP) and four of S. lycopersicum var. cerasiforme (SLC), under control (100% field capacity, FC) and water stress (40% FC) conditions. Growth parameters, including stem, leaf, and root morphology, biomass, water use efficiency (WUE), photosynthetic pigments (chlorophyll a, chlorophyll b, and carotenoids), and osmolytes (proline and total soluble sugars) were assessed. Thedifferences between accessions, treatments, and their interactions were assessed. In drought conditions, the two accessions, ECU689 (SP) and ECU1009 (SLC), were identified as the most drought-tolerant ones. The two genotypes hardly showed a decrease in root water content, root fresh weight, and aerial biomass, as well as small alterations of leaf morphology. All these features point to their better performance of growth and physiological function under stress. Although proline levels increased under water stress in all accessions, the rise was markedly lower in ECU689 and ECU1009, suggesting that these accessions may utilize alternative adaptive mechanisms, such as root resilience and osmotic regulation. PT210 (SLC) demonstrated strong osmotic adjustment, increasing total soluble sugars by 183.2% (86.15 mg eq. glucose g-1 DW under stress). Photosynthetic pigments remained stable across treatments, indicating that the water stress applied was moderate. Principal component analysis (PCA) revealed a clear separation between the control and water stress groups; however, no clear separation was observed between SP and SLC accessions. Among the traits contributing to this differentiation, proline displayed significant positive correlations with photosynthetic pigments under water stress conditions, but not under control conditions. Overall, these findings highlight ECU689 and ECU1009 as promising donor candidates for breeding drought-tolerant tomato varieties, due to their ability to maintain stable root traits and biochemical balance under water stress. In contrast, among the other accessions, ECU1385 (SP) and PI487625 (SLC) were found to be more sensitive to stress. Incorporating these tolerant accessions into tomato breeding programs may facilitate the development of resilient tomato cultivars and rootstocks for drought-prone environments., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research presented in this publication was funded by grant PID2020-118627RB-I00 funded by MICIU/AEI/https://doi.org/10.13039/501100011033 and by grant CIPROM/2021/020 funded by Conselleria d'Educació, Universitats i Ocupació of the Generalitat Valenciana. Aylin Kabas stay in Valencia for performing this research was supported by The Scientific and Technological Research Council of Turkey (TUBITAK) International Postdoctoral Research Fellowship Programme under project number 1059B192202619. Oussama Antar received a pre-doctoral grant from Conselleria d Educació, Universitats i Ocupació of the Generalitat Valenciana within the Santiago Grisolía program (CIGRIS/2021/113).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Digital flow platform for the synthesis of high-quality multi-material perovskites

  • Iglesias, Diego
  • Tinajero, Cristopher
  • Marchetti, Simone
  • Luis-Gómez, Jaume
  • Martinez-Cuenca, Raul
  • Fuentes-Ballesteros, Jose F.
  • Aranda, Clara A.
  • Martinez-Serra, Alejandro
  • Asensio, Maria C.
  • Abargues, Rafael
  • Zanatta, Marcileia
  • Sans, Victor
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Perovskite materials have demonstrated great potential for a wide range of optoelectronic applications due to their exceptional electronic and optical properties. However, synthesising high-quality perovskite films remains a significant challenge, often hindered by batch-wise processes that suffer from limited control over reaction conditions, scalability and reproducibility. In this study, we present a novel approach for synthesising single-crystal perovskites with an optimised continuous-flow reactor. Our methodology utilises a 3D printed system that enables precise control over reactant concentrations, reaction times, and temperature profiles. The reaction chamber was designed and optimised by combining residence time distribution (RTD) studies and computational fluid dynamics (CFD) simulations. High-quality single-crystal perovskites with different formulations were obtained employing seeding and seedless conditions. The possibility of synthesising mixed halide single crystal perovskites with different compositions along its structure was demonstrated by simply shifting the feedstock solution during the crystallisation, demonstrating the versatility of this technology., This work has been funded by the project (PID2020-119628RB-C33, PID2020-119628RB-C32 and PID2020-119628RB-C31), MCIN/AEI/10.13039/501100011033 and (CNS2023-144752) funded by MCIN/AEI/10.13039/501100011033 and the Union Europea NextGenerationEU/PRTR. CT thanks the Generalitat Valenciana (CIGRIS/2021/075) for funding. The authors are grateful to the SCIC of the Universitat Jaume I for Technical support. J. L-G. is supported by an FPU21/03740 Doctoral grant from the Spanish MCIU. CAA thanks the Spanish Ministry of Science and Innovation under contract number (TED2021-129758B-C33) MCIN/AEI/10.13039/501100011033/European Union NextGeneration EU/PRTR provided gratefully acknowledged financial support. MZ thanks the funding received from the "la Caixa" Foundation (ID 100010434) under the fellowship number LCF/BQ/PR24/12050016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Comprehensive Study of Uterine Muscle Activity During the Third Trimester: Comparison of Singleton and Multiple Gestations

  • Meng, Yu
  • Garcia-Casado, Javier|||0000-0003-1410-2721
  • Prats-Boluda, Gema|||0000-0002-9362-5055
  • Martínez-de-Juan, José L.|||0000-0001-9133-3123
  • Ye Lin, Yiyao|||0000-0003-2929-181X
  • Padilla Prieto, Carmen
  • Monfort-Ortiz, Rogelio
  • Jose Diago-Almela, Vicente
  • Hao, Dongmei
  • Li, Guangfei
[EN] Objective: Electrohysterography (EHG) has been shown to provide valuable information for assessing preterm birth risk. However, few studies have focused on multiple gestations (MG), a well-known risk factor for preterm birth. This study aimed to comprehensively characterize and compare uterine EHG signals between singleton (SG) and MG pregnancies during the third trimester. Method: This prospective cohort study analyzed 383 EHG recordings from 61 SG and 92 MG women during the third trimester. A whole-window approach was used to extract four key EHG features: peak-to-peak amplitude (PPA), Kurtosis of the Hilbert Envelope (KHE), median frequency (MDF) and sample entropy (SampEn). Generalized additive models (GAM) were applied to evaluate temporal trends across gestational age (GA) and gestation type (SG and MG). Results: In SG pregnancies, PPA and KHE progressively increased, with a significant rise in KHE at labour. MDF remained stable until labour, while SampEn gradually declined, especially at term. MG pregnancies showed similar but less pronounced trends: MG exhibited a notably earlier activation of uterine activity than SG before 32 weeks of gestation (WoG), and a slowing-down electrophysiological progression beyond 32 WoG, resulting in similar characteristics with no significant differences. Conclusion: These findings provide electrophysiological evidence suggesting that MG pregnancies may enter a labour-preparatory state earlier, potentially increasing the PTB risk, while the later convergence of EHG features may indicate compensatory mechanisms to delay labour. This work integrates EHG signal analysis with clinical obstetric care, offering valuable insights for clinical management and early PTB risk assessment in MG pregnancies., This work was supported in part by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund under Grant PID2021-124038OB-I00 and Grant PID2024-159119OB-I00, in part by the Generalitat Valenciana under Grant CIGRIS/2022/084, and in part by the Universitat Politecnica de Valencia (funding for open access charge).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A novel tomato inter-specific (Solanum lycopersicum var. cerasiforme and S. pimpinellifolium) MAGIC population facilitates trait association and candidate gene discovery in untapped exotic germplasm

  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Antar, Oussama|||0009-0004-7224-6752
  • Pereira-Dias, Leandro|||0000-0002-6246-0294
  • Solana-Garcia, Andrea|||0000-0002-1071-7625
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Ferrante, Paola
  • Aprea, Giuseppe
  • Díez-Niclós, María José Teresa de Jesús
  • Giuliano, Giovanni
[EN] We developed a novel eight-way tomato multi-parental advanced generation inter-cross (MAGIC) population to improve the accessibility of tomato relatives genetic resources to geneticists and breeders. The inter-specific MAGIC population (ToMAGIC) was obtained by inter-crossing four accessions each of Solanum lycopersicum var. cerasiforme (SLC) and S. pimpinellifolium (SP), which respectively are the weedy relative and the ancestor of cultivated tomato. The eight exotic ToMAGIC founders were selected based on a representation of the genetic diversity and geographical distribution of the two taxa. The resulting MAGIC population comprises 354 lines which were genotyped using a new 12k tomato Single Primer Enrichment Technology (SPET) panel and yielded 6,488 high-quality SNPs. The genotyping data revealed a high degree of homozygosity, an absence of genetic structure, and a balanced representation of the founder genomes. To evaluate the potential of the ToMAGIC population, a proof-of-concept was conducted by phenotyping it for fruit size, plant pigmentation, leaf morphology, and earliness. Genome-wide association studies (GWAS) identified strong associations for the studied traits, pinpointing both previously identified and novel candidate genes near or within the linkage disequilibrium blocks. Domesticated alleles for fruit size were recessive and were found, at low frequencies, in wild/ancestral populations. Our findings demonstrate that the newly developed ToMAGIC population is a valuable resource for genetic research in tomato, offering significant potential for identifying new genes that govern key traits in tomato. ToMAGIC lines displaying a pyramiding of traits of interest could have direct applicability for integration into breeding pipelines providing untapped variation for tomato breeding., This work was supported by grant PID2020-118627RB-I00 funded by MICIU/AEI/10.13039/501100011033, TED2021-129296B-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union Europea NextGenerationEU/PRTR, CIPROM/2021/020 funded by Conselleria d Innovació, Universitats, Ciència i Societat Digital of the Generalitat Valenciana, the HARNESSTOM innovation action (grant agreement no. 101000716) funded by the European Commission H2020 Research and Innovation Programme, and the Horizon Europe PRO-GRACE project (grant agreement no. 101094738). Andrea Arrones is grateful to Spanish Ministerio de Ciencia, Innovación y Universidades for a predoctoral (FPU18/01742) contract. Oussama Antar is grateful to Conselleria d Innovació, Ciència i Societat Digital of the Generalitat Valenciana for a predoctoral grant within the Santiago Grisolía program (CIGRIS/2021/113). Leandro PereiraDias is grateful to Universitat Politècnica de Valencia and the Spanish Ministerio de Universidades for a post-doctoral grant under the Margarita Salas funded by the European Union NextGenerationEU/PRTR. Andrea Solana is grateful to Spanish Ministerio de Ciencia e Innovación for a predoctoral grant (PRE2022-102368) funded by MCIN/AEI/10.13039/501100011033 and FSE+. Pietro Gramazio is grateful to Spanish Ministerio de Ciencia e Innovación for a post-doctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR. Funding for open access: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

From greenhouse conditions to the field: stability of tolerance to water deficit in the tomato wild relatives Solanum lycopersicum var. cerasiforme and Solanum pimpinellifolium

  • Antar, Oussama|||0009-0004-7224-6752
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Isern, Helena
  • Rivera, Ana
  • Díez Niclós, Mª José Teresa De Jesús
  • Casals, Joan
[EN] Breeding tomatoes for tolerance to water deficit (WD) has become a crucial goal amidst climate change scenarios marked by water shortages. Given the limited tolerance within the cultivated genepool, the red-fruited wild relatives Solanum lycopersicum var. cerasiforme (SLC) and Solanum pimpinellifolium (SP) are promising sources of valuable alleles. In this study, we utilized four SP and six SLC genotypes, chosen to represent broad genetic and ecogeographic diversity, to explore the stability of tolerance to WD across highly diverse experimental conditions, including early developmental stages (plantlet), greenhouse experiments (short and long cycles), and field conditions. The impact of WD on phenotypic traits exhibited a consistent direction across all experimental conditions: plant growth traits were negatively affected, whereas fruit quality traits demonstrated a positive response. Biomass partitioning into stems, leaves, and fruits remained unaffected by WD. The genotype-by-watering interaction emerged as the main factor driving the effect of WD on phenotyped biomarkers, indicating substantial genetic variation in phenotypic plasticity in response to WD conditions. Poor correlation was observed among plasticity indices obtained in different experimental conditions, underscoring the need for multi-environmental experiments to unravel the complex genetic architecture of WD tolerance. Two genotypes (SP2, SLC1) originally collected from arid areas of South-America were identified as promising sources of WD tolerance., This work was supported by grant MAGICPIMPCERAS, PID2020-118627RB-I00 funded by MICIU/AEI/https://doi.org/10.13039/501100011033. Oussama Antar is grateful to Conselleria d'Innovacio, Ciencia i Societat Digital de la Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia programme (CIGRIS/2021/113). Joan Casals is a Serra Hunter Fellow at Universitat Politecnica de Catalunya.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Traffic information impact on the optimisation of fuel consumption and emissions in an urban driving scenario

  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Nakaema-Aronis, Andre|||0000-0001-9599-7736
  • Trintinaglia-Perin, Augusto|||0000-0002-4915-2852
[EN] Traffic jams are one of the main causes of city pollution and significantly impact the economic cost of transportation. Context awareness by the traffic players may be key to improving the current control strategies and optimising traffic flow. This study investigates the effect of information availability through vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) connectivity in an urban real-driving route. An optimal control problem (OCP) is formulated to create speed advisory profiles, and it is solved using dynamic programming (DP) to provide the global optimal solution. Experimental engine tests have been used to characterise the fuel consumption and emissions of the engine, while traffic sensors around the city of Valencia have been used to reproduce realistic urban mobility using the traffic simulation software SUMO. The paper quantifies the impact of traffic information on vehicle fuel consumption and emissions. Under normal traffic conditions and assuming total access to the traffic information, the DP algorithm can reduce almost 60% on average the fuel consumption compared to normal driving behaviour provided by the default car-following model of SUMO., The authors disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research has been partially funded by the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana with the Funding programme Santiago Grisol & imath;a (GRISOLIA/2023-CIGRIS/2022/065). Authors would like to acknowledge the Jesus Sanchez Company & the Servici de Mobilitat from the Ayuntamiento de Valencia for their kind help and data providing and the Agencia Estatal de Investigacion, through the project Gestion Energetica Optima en Veh & imath;culos Electricos Conectados (PID2023-152466OBI00), for supporting the research and development of intelligent technologies for sustainable mobility.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Inducing Reactivity by Cluster Strain in Titanium Frameworks

  • Gomez-Oliveira, Eloy P.
  • Castells-Gil, Javier
  • Gandara, Felipe
  • Almora-Barrios, Neyvis
  • Tatay, Sergio
  • Padial, Natalia M.
  • Marti-Gastaldo, Carlos
  • Fernandes-de Almeida, Vitor
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Despite their potential to control charge separation and redox activity, deliberate strategies to distort metal-oxo clusters in molecular frameworks remain limited. Here we present a proof-of-concept for cluster strain engineering using the titanium-organic framework MUV-10 as a model. Replacing Ca2+ with larger alkaline-earth cations (Sr2+, Ba2+) induces predictable distortions of Ti2M2 clusters and a cubic-to-tetragonal cell transformation while preserving the overall connectivity. This local strain alters Ti-O coordination geometry, enhances ligand-to-metal charge transfer, and promotes the photogeneration of Ti3+ sites, as validated by photocatalytic CO2 methanation under standardized conditions. Importantly, the extent of distortion follows the trend anticipated from the Goldschmidt tolerance factor, a classical descriptor from perovskite chemistry, that we repurpose here to rationalize strain in reticular frameworks. Taken together, these findings establish a conceptual link between oxide catalysis and reticular chemistry, highlighting cluster strain as a potential structural switch to modulate redox reactivity in molecular solids., This work was supported by the EU (ERC-2021-COG-101043428 & ERC-2022-POC-101113106), the Generalitat Valenciana (PROMETEU-2021-054 and MFA/2022/026) and MICIU/AEI/10.13039/501100011033 (CEX2024-001467-M, PID2023-149922OB-I00, PID2023-150383OB-I00 and CNS2022-135677). V.F.A. is thankful for PhD financial support from Conselleria de Innnovacion, Universidades, Ciencia y Sociedad Digital under Santiago Grisolia program (CIGRIS/2021/096). H.G. is thankful for Ayuda RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033 and by El FSE invierte en tu future. S.N. is thankful for the support received from Grant PID2024-155324OB-I00, and F.G. is thankful for Grant PID2021-123287OB-I00, funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. N.M.P. thanks La Caixa Foundation for a Postdoctoral Junior Leader-Retaining Fellowship (ID100010434, fellowship code LCF/BQ/PR20/11770014), the Generalitat Valenciana (SEJI-GENT/2021/059) and the RYC2022-037132-I funded by MICIU/AEI/10.13039/501100011033 and by the ESF+. J.C.-G. thanks The Leverhulme Trust for an Early Career Fellowship (ECF-2023-129). The authors would also like to thank Clara Chinchilla Garzon for her help with the EPR measurements, the SCSIE of the University of Valencia for providing access to its research facilities, and the X-ray diffraction facility of ICMM-CSIC for access to SCXRD. BSC-RES (QHS-2025-1-0029 and 2025-2-0035) and Synchrotron ALBA (beamline BL13-XALOC, 2024098672 and beamline BL04-MSPD, 2024028209) are also acknowledged for access to their facilities and technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Molecular cages: emerging applications in diverse fields

  • Ortiz-Gómez, Eduardo|||0009-0005-5778-9158
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Martí-Centelles, Vicente|||0000-0002-9142-9392
[EN] Molecular cages are readily adaptable supramolecular structures with outstanding potential for multiple purposes. Cages have well-defined cavities that enable precise guest encapsulation, offering unique opportunities in sensing, catalysis, environmental and biological applications, among others. Recent advances in the field have demonstrated how the structural versatility of molecular cages - including all-organic and metal-organic architectures - allows the design of systems with tailored functionality. Innovative uses span from simple host-guest applications for the selective encapsulation of chemical species, to more sophisticated approaches aiming to mimic biological systems. This review gives a general overview of the field, focusing on the advances in the last 3 years, and emphasizing how the design of molecular cages to achieve specific functionalities is opening frontiers in innovative applications., V.M.-C. acknowledges the financial support from projects ESGENT/2024/001 and CIDEGENT/2020/031 both funded by the Generalitat Valenciana, Project PID2020-113256RA-I00 funded by MICIU/AEI/10.13039/501100011033, and Project CNS2023-144879 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. R.M.-M. acknowledges the financial support from Project PROMETEO CIPROM/2021/007 from the Generalitat Valenciana and project PID2021-126304OB-C41 funded by MICIU/AEI/10.13039/501100011033/ and FEDER A way to make Europe. This research was supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. E.O.-G. is grateful to the Generalitat Valenciana for Grisolia grant (CIGRIS/2021/128).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Beer Bagasse as Filler for Starch-Based Biocomposite Films for Food Packaging Applications

  • Gómez-Contreras, Paula Andrea|||0000-0002-2185-7607
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Development of biodegradable packaging materials and valorization of agri-food waste are necessary to produce more sustainable materials while reducing the environmental impact. Starch-based biocomposite films reinforced with beer bagasse fractions with different purification degrees were developed and characterized in structural, mechanical, thermal and optical properties. To this aim, 5% and 10% (w/w) of either beer bagasse (BB) or its lignocellulosic-rich fibers (LF), obtained by subcritical water extraction at temperatures between 110 and 170 degrees C, were incorporated into starch matrices. Elastic modulus and tensile strength values increased by up to eight-fold and 2.5-fold, respectively, compared to the control film. The incorporation of BB or LF significantly enhanced the mechanical resistance of the films. In general, the increment in the filler:polymer ratio significantly increased the EM values (p < 0.05), while decreasing the stretchability of the films around 80-85%, regardless of the type of filler. This effect suggests a good interfacial adhesion between the fillers and the polymeric matrix, as observed by FESEM. The biocomposite films exhibited a dark reddish appearance, reduced transparency, light blocking barrier capacity and remarkable antioxidant activity due to the presence of phenolic compounds in the fibers. The water vapor and oxygen barrier properties were better preserved when using the more purified LF obtained at 170 degrees C. Overall, starch films reinforced with beer bagasse fractions showed strong potential for the development of biodegradable food packaging materials., This research was supported by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR (project TED2021-132295B-I00). The authors also thank the Generalitat Valenciana (GVA) for the grant received through the GRISOLIA program (CIGRIS/2021/033).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Digital flow platform for the synthesis of high-quality multi-material perovskites

  • Iglesias, D.
  • Tinajero, C.
  • Marchetti, S.
  • Luis-Gómez, J.
  • Martinez-Cuenca, R.
  • Fuentes-Ballesteros, J.F.
  • Aranda, C.A.
  • Martínez Serra, A.
  • Asensio, María C.
  • Abargues, R.
  • Boix, P.P.
  • Zanatta, M.
  • Sans, V.
Perovskite materials have demonstrated great potential for a wide range of optoelectronic applications due to their exceptional electronic and optical properties. However, synthesising high-quality perovskite films remains a significant challenge, often hindered by batch-wise processes that suffer from limited control over reaction conditions, scalability and reproducibility. In this study, we present a novel approach for synthesising single-crystal perovskites with an optimised continuous-flow reactor. Our methodology utilises a 3D printed system that enables precise control over reactant concentrations, reaction times, and temperature profiles. The reaction chamber was designed and optimised by combining residence time distribution (RTD) studies and computational fluid dynamics (CFD) simulations. High-quality single-crystal perovskites with different formulations were obtained employing seeding and seedless conditions. The possibility of synthesising mixed halide single crystal perovskites with different compositions along its structure was demonstrated by simply shifting the feedstock solution during the crystallisation, demonstrating the versatility of this technology. © 2025 RSC., This work has been funded by the project (PID2020-119628RB-C33, PID2020-119628RB-C32 and PID2020-119628RB-C31), MCIN/AEI/10.13039/501100011033 and (CNS2023-144752) funded by MCIN/AEI/10.13039/501100011033 and the Unión Europea NextGenerationEU/PRTR. CT thanks the Generalitat Valenciana (CIGRIS/2021/075) for funding. The authors are grateful to the SCIC of the Universitat Jaume I for Technical support. J. L-G. is supported by an FPU21/03740 Doctoral grant from the Spanish MCIU. CAA thanks the Spanish Ministry of Science and Innovation under contract number (TED2021-129758B-C33) MCIN/AEI/10.13039/501100011033/European Union NextGeneration EU/PRTR provided gratefully acknowledged financial support. MZ thanks the funding received from the “la Caixa” Foundation (ID 100010434) under the fellowship number LCF/BQ/PR24/12050016., Peer reviewed
Docta Complutense
Publication Artículo científico (JournalArticle)

Invariant spatial pattern across mediterranean scrublands in the iberian pear "Pyrus bourgaeana"

  • Morera, Brayan
  • Garrote, Pedro J.
  • Wiegand, Thorsten
  • Ayllón Fernández, Daniel
  • Fedriani, Jose M.
The spatial distribution pattern of plant species is frequently driven by a combination of biotic and abiotic factors that jointly influence the arrival, establishment, and reproduction of plants. Comparing the spatial distribution of a target plant species in different populations represents a robust approach to identify the underlying mechanisms. We mapped all reproductive individuals of the Iberian pear (Pyrus bourgaeana) in five plots (1.39–8.57 km2) differing in the activity of seed dispersers and vertebrate herbivores in southern Iberian Peninsula. We used Thomas point process models to quantify the consistency in the spatial pattern and the level of spatial aggregation of this mammal-dispersed tree among the five populations. We tested two hypotheses: (i) because the clumped defecation behavior of some dispersers can lead to local tree aggregation, and because denser groups of fruiting trees can limit seed dispersal by attracting frugivores to specific sites, we expected a consistent small-scale aggregation pattern across all populations; and (ii) because ungulates reduce recruitment by preying on seeds and seedlings, we hypothesize that ungulate activity will show negative relationships with tree density and level of aggregation. Our spatial analysis revealed consistent and highly aggregated small-scale patterns of all Iberian pear populations, with one critical scale aggregation, a low density of clusters and high variability in the number of trees per cluster. Ungulate activity and the number of trees per cluster showed a marginally significant negative correlation, suggesting that in areas with higher ungulate activity, trees tend to form less dense clusters. Although several of the underlying processes varied greatly among the five study sites, the Iberian pear showed a relatively consistent spatial pattern with just quantitative nuances throughout the entire region. This result has significant implications for the reproductive success of the species, management strategies, and ultimately the long-term persistence of populations.