Skip to main content

Desarrollo de recubrimientos bajo-emisivos Bird Friendly y multi-Superficies Selectivas en Frecuencia-BiFre

CPP2022-010053

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Transferencia de Conocimiento
Call Proyectos en Colaboración Público-Privada
Call year 2022
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre ARIÑO DUGLASS, S.A.

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Study of the optimal deposition conditions of Ag(O2) and Ag(N2) seed layers on ultrathin silver transparent conductive films

  • Cueva, Ana
  • Carretero, Enrique
In this study, ultrathin Ag layers were analyzed for their use as conductive films, which were fabricated via magnetron sputtering on a glass substrate and protected with aluminum-doped zinc oxide (AZO). These layers were obtained using seed layers made of silver deposited by adding small amounts of oxygen or nitrogen prior to the deposition of the metallic silver layer. This study aimed to determine the optimal amount of gas needed to maximize the conductivity and transparency properties of the conductive films with varied silver thicknesses. The optimal characteristics of the studied samples were verified using spectrophotometric, sheet resistance measurements, and surface morphology techniques. It was concluded that a smaller amount of silver required a higher amount of gas to be introduced into the seed layer. Besides, to fabricate an optimal conductive film, it is necessary to deposit 5.9 or 5.2 nm of silver with a seed layer obtained with a O2 partial pressure of 1.7 × 10−4 mbar, or 5.2 or 4.7 nm of silver with a seed layer obtained using a N2 partial pressure of 4.2 × 10−4 mbar. These samples provide sheet resistance values between 13.0 Ω/sq and 17.6 Ω/sq and transmission between 86.2 % and 87.3 % at 550 nm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improving communication signal transmission in multiple low-e windows using frequency selective surfaces

  • Chueca, Rocío
  • Muñoz, María
  • Cueva, Ana
  • Alcain, Raúl
  • Heras, Carlos D.
  • Salinas, Íñigo
The use of low-emissivity and solar control glass for thermal insulation in transportation and architecture poses a problem for communications, since the metallic coatings used in this glass attenuate radiofrequency (RF) signals. One solution to this problem is to define Frequency Selective Surfaces (FSS) on the coatings to ensure the transmission of RF signals while maintaining the thermal properties of the glazing. On windows with multiple coated panes, the interaction between the different surfaces grows more complex, as the dimensions of the structure are in the order of the wavelength of the signals involved. This is also an opportunity for the design of windows with specific transmission properties. The aim of this work is to present a design method for windows with multiple low-e coatings and multiple FSS based on the optimization of the RF transmission using an equivalent transmission line model. As a validation of our method, we show designs for windows with attenuation minima at 1, 1.8 and 5.8 GHz. Window samples according to these designs have been fabricated and measured, showing good correlation between simulation and experiment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optical properties in the near ultraviolet of low-emissivity coatings

  • Martín-Nieto, Andrea
  • Cueva, Ana
  • Carretero, Enrique
Low-emissivity (low-E) coatings are widely used in architectural glazing to improve building energy performance and reduce environmental impact. Although their optical behavior is generally studied in the visible and infrared regions, this work investigates the ultraviolet optical properties of visually equivalent low-E multilayer coatings fabricated by magnetron sputtering, in order to enable the fabrication of bird-friendly coatings that prevent bird collisions with building glazing. The coatings were prepared with a silver layer and two different dielectric materials, tin oxide (SnO2) and aluminum-doped zinc oxide (AZO). Visually equivalent samples with the different dielectric materials were designed and their optical properties characterized, showing the expected similar behavior in the visible and infrared regions, while revealing clear differences in the transmission of the samples, with over a 40% higher transmittance in the case of SnO2 samples and similar reflectance in both types. Furthermore, from 13 to 40% lower emissivity was found for samples deposited with AZO, depending on the amount of silver. Finally, a remarkable increase in ultraviolet reflectance was observed with increasing silver thickness, from approximately 0.20 for the 10 nm Ag sample to around 0.45 for the 20 nm one.