Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 50
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Thin film nanostructuring at oblique angles by substrate patterning

  • Muñoz Piña, S.
  • Alcaide, A.M.
  • Limones Ahijón, B.
  • Oliva Ramírez, M.
  • Rico, V.
  • Alcalá Penadés, Germán
  • González, M.U.
  • García Martín, J.M.
  • Álvarez, R.
  • Wang, D.
  • Schaaf, P.
  • González Elipe, A.R.
  • Palmero, A.
It is demonstrated that, besides classical nanocolumnar arrays, the oblique angle geometry induces the growth of singular structures in the nanoscale when using wisely designed patterned substrates. Well-ordered array of crosses, cylindrical nanorods or hole structures arranged in square or hexagonal regular geometries are reported as examples, among others. The fundamental framework connecting substrate topography and film growth at oblique angles is presented, allowing the use of substrate patterning as a feasible thin film nanostructuring technique. A systematic analysis of the growth of TiO2 thin films on 4 different lithographic patterned substrates in 4 different scale lengths is also presented. A first conclusion is the existence of a height-based selective growth in the initial stages of the deposition, by which the film preferentially develops on top of the tallest substrate features. This behavior is maintained until the film reaches a critical thickness, the so-called Oblivion Thickness, above which the film topography becomes gradually independent of the substrate features. A general formula relating the spatial features of the pattern, the coarsening exponent and the Oblivion Thickness has been deduced.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

One-step decomposition pathway for solution-derived metal oxide layers driven by hydroxyl radical atmospheres

  • Rivas, Y. A.
  • Echaniz-Cintora, M.
  • Barreto, A.
  • Molina-Calzada, J. A.
  • Serrano, M. C.
  • Jimenez, R.
  • Bretos, I.
  • Calzada, M. L.
  • Vidal Moya, José Alejandro
[EN] Solution deposition of high-performance oxide films has attracted intense research interest driven by the need for sustainable synthesis strategies that simplify key processes such as ligand removal, oxidation of organic residues, and the formation of amorphous and crystalline oxide phases. These approaches aim not only to reduce the carbon footprint but also to lower the thermal budget required for oxide film formation, thereby enabling direct, large-area deposition on low-cost, temperature-sensitive substrates required for emerging applications in thin-film electronics. In this work, we elucidate the chemical mechanism underlying the crystallization of solution-processed metal oxide films under highly reactive hydroxyl ((OH)-O-center dot) radical atmospheres. These radicals promote a simple, rapid, one-step decomposition of solution-derived films, directly yielding crystalline oxide films with substantially reduced energy input compared with conventional solution-deposition processes. Because this mechanism is independent of solution chemistry and oxide formulation, the platform is broadly applicable to diverse solution chemistries, crystalline oxides, and substrates. As a representative demonstration, BiFeO3 perovskite films are fabricated on flexible polyimide substrates, producing biocompatible, multifunctional flexible films., This work was supported by the Spanish projects PID2022-136790OB-I00, PID2021, CNS2022-135743 and TED2021-130871BC21 funded by MCIN/AEI/10.13039/501100011033 and the European Union through the "NextGeneration EU"/PRTR initiative. The Severo Ochoa Centres of Excellence program is acknowledged through Grant CEX2024-001445-S. A. B acknowledges financial support of the CAM PhD grant from the Comunidad de Madrid (PIPF-2024ECO-33982). The authors acknowledge Teresa Blasco Ibanez for contributing to the interpretation and discussion of the Electron Paramagnetic Resonance (EPR) results of the samples obtained at the Instituto de Tecnologia Quimica (UPV-CSIC), Universitat Politecnica de Valencia - Consejo Superior de Investigaciones Cientificas. The Advanced Light Microscopy Service at the Centro Nacional de Biotecnologia (CNB-CSIC) is acknowledged for assistance with confocal microscopy studies. The Scanning Electron Microscopy Service at the Instituto de Micro y Nanotecnologia (IMN-CSIC) is acknowledged for support with SEM studies. The MiNa Laboratory at IMN acknowledges its funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Dynamic Range Nanowire Resonators

  • Molina Fernández, Juan
  • Escobar, Javier Enrique
  • Ramos Vega, Daniel
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Dynamic range quantifies the linear operation regime available in nanomechanical resonators. Nonlinearities dominate the response of flexural beams in the limit of very high aspect ratio and very small diameter, which leads to expectation of low dynamic range for nanowire resonators in general. However, the highest achievable dynamic range for nanowire resonators with practical dimensions remains to be determined. We report dynamic range measurements on singly clamped silicon nanowire resonators reaching remarkably high values of up to 90 dB obtained with a simple harmonic actuation scheme. We explain these measurements by a comprehensive theoretical examination of dynamic range in singly clamped flexural beams including the effect of tapering, a usual feature of semiconductor nanowires. Our analysis reveals the nanowire characteristics required for broad linear operation, and given the relationship between dynamic range and mass sensing performance, it also enables analytical determination of mass detection limits, reaching atomic-scale resolution for feasible nanowires., This work was supported by the ERC CoG Grant 681275 “LIQUIDMASS” and by the Spanish Science, Innovation and Universities Ministry through Projects “EXOFLUX” (PGC2018-101762-B-I00) and “MOMPs” (TEC2017-89765- R). E.G.-S. acknowledges financial support by Fundación General CSIC through the ComFuturo program. We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC13-4E-1794 with support from FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High thermoelectric efficiency in electrodeposited silver selenide films: from Pourbaix diagram to a flexible thermoelectric module

  • Manzano, Cristina V.
  • Caballero-Calero, Olga
  • Martín-González, Marisol
In the last few years, the exploration of new thermoelectric materials with low-toxicity, earth-abundance, and high-efficiency has become essential. Following this trend, sustainable, easily scalable, and costeffective fabrication methods, such as electrochemical deposition, are also desirable. In this work, the Pourbaix diagram of silver¿selenium¿water was developed to find an adequate pH and reduction potential for the electrodeposition of stable silver selenide. Based on this diagram, a solution without the incorporation of additives was developed. Silver selenide films were electrodeposited at different reduction potentials, and after the deposition, the compositional, morphological, and structural characterizations of the silver selenide thin films were analyzed. The thermoelectric properties of the electrodeposited silver selenide films were measured at room temperature. The maximum power factor was found for the films grown at 0.071 V with a value of 3421 705 mW m1 K2 and a thermal conductivity of 0.56 0.06 W m1 K1. Even better, when it can be done by employing a technique that is easily scalable to an industrial level and allows large areas to be obtained, such as electrodeposition. Finally, films with similar properties were deposited on a flexible Kapton substrate. A unileg thermoelectric power generator was produced with maximum output powers of 14.7, 29.4, and 37 mW under temperature differences of 10, 15, and 19 K, respectively; and maximum power densities of 55.1, 110.1, and 138.6 mW m2 under temperature differences of 10, 15, and 19 K, respectively., The authors would like to acknowledge financial support from MAT2017-86450-C4-3-R and CSIC PIF 2D-MESES. Cristina V. Manzano would like to acknowledge funding from “Atracci´on de Talento Investigador” de la Comunidad de Madrid, contract 2019- T1/IND-13541. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and the EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic modulation of mid and far-infrared plasmon resonances using the orientational magneto optical effect

  • Armelles Reig, Gaspar
  • Cebollada, Alfonso
Arrays of in plane randomly placed aligned slits were engraved on an anisotropic magneto resistance Ni81Fe19 film, a material whose optical properties depend on the relative orientation of the light polarization and the magnetization direction (orientational magneto optical effect). In the 3-14 μm spectral range and for light polarized perpendicular to the slit axis, the reflectivity of the arrays presents a dip related to the excitation of the slit plasmon longitudinal resonance. We show that the intensity of this feature is different if the direction of the magnetization is parallel or perpendicular to the light polarization that excites this resonance. By varying the slit length, the spectral dependence of this magnetic modulation of the plasmon resonance has been analyzed. The results suggest that the orientational magneto optical effect could be used for magnetic modulation of plasmon resonances from the mid-infrared to the far-infrared spectral ranges., We acknowledge the MiNa Laboratory at IMN for the fabrication of the slits arrays and funding from MINECO under Project No. CSIC13-4E-1794 and from CM under Project No. S2013/ICE-2822 (Space-Tec), both with the support from EU (FEDER, FSE). This work has been also supported by MINECO through projects AMES (MAT 2014-58860-P), Quantum Spin Plasmonics (FIS2015-72035-EXP), MIRRAS(MAT2017-84009-R), and Comunidad de Madrid through project SINOXPHOS-CM (S2018/BAA-4403).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Micro-Kelvin Resolution at Room Temperature Using Nanomechanical Thermometry

  • Ferreiro-Vila, Elías
  • Molina Fernández, Juan
  • Weituschat, Lukas Max
  • Gil-Santos, Eduardo
  • Postigo, Pablo Aitor
  • Ramos Vega, Daniel
Ultrahigh sensitivity temperature measurement is becoming increasingly relevant for different scientific and technological fields from fundamental physics to high-precision engineering applications. Here, we demonstrate the use of a nanomechanical resonator - free standing silicon nitride membranes with thicknesses in the nanoscale - for room temperature thermometry reaching an unprecedented resolution of 15 μK. These devices were characterized by using an interferometric system at high vacuum, where there are only two possible mechanisms for heat transfer: thermal conductivity and radiation. While the expected behavior should be to decrease the frequency of the mechanical resonance due to the thermoelastic effect, we observe that the nanomechanical response can be both positive and negative depending on the thermal flux: a heat point source always shifts the mechanical resonance to lower frequencies, while a distributed heat source shifts the resonance to higher frequencies., This research is funded by the Spanish Ministry of Science under project MOMPs reference TEC2017-89765-R and the European Association of National Metrology Institutes (JRP f14 PhotOQuanT17FUN05). E.G.-S acknowledges financial support by the Spanish Ministry of Science under the project MicroBIOMS, reference PID2019-109765RA-I00. This project has received funding from the EMPIR program co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation program. The service from the Micro and Nanofabrication Laboratory (MiNa) and X-SEM Laboratory is funded by MCIU (CSIC13-4E-1794) and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal conductivity reduction by nanostructuration in electrodeposited CuNi alloys

  • Manzano, Cristina V.
  • Caballero-Calero, Olga
  • Martín-González, Marisol
In the last few years, the use of inexpensive and scalable materials in industry for thermoelectric applications has received great interest, such as CuNi alloys. In this work, nanocrystalline CuNi alloys with different compositions were grown by pulsed electrodeposition. The incorporation of saccharine in the electrolyte allowed reduction of the crystallite size of CuNi down to 30¿40 nm. The thermoelectric properties, such as the electrical conductivity, Seebeck coefficient, and thermal conductivity of these nanocrystalline alloys, were studied. The maximum figure of merit obtained at room temperature was (6.1 1.4) 102 for nanocrystalline Cu0.55Ni0.45. The thermal conductivity of CuNi alloys was reduced by the nanostructuration to a value of 9.0 0.9 W m1 K1, making these nanocrystalline CuNi alloys more competitive than other more classical thermoelectric materials. This work opens a new field to be investigated, that can be described as the use of commercial alloys such as CuNi for thermoelectric applications and shows the use of a new approach to enhance the thermoelectric properties of inexpensive and/or fewer pollutant materials, The authors would like to acknowledge financial support from MAT2017-86450-C4-3-R. C. V. M. acknowledges financial support from Juan de la Cierva Incorporacio´n grants (IJCI-2017-31350) and P. C.-S. acknowledges financial support from CSIC JAEINT19_EX_0606 grant. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

3D Bi2Te3 Interconnected Nanowire Networks to Increase Thermoelectric Efficiency

  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Maeder, Xavier
  • Beardo, Albert
  • Cartoixà, Xavier
  • Álvarez, F. Xavier
  • Martín-González, Marisol
3D interconnected nanowire scaffoldings are shown to increase the thermoelectric efficiency in comparison to similar diameter 1D nanowires and films grown under similar electrodeposition conditions. Bi2Te3 3D nanonetworks offer a reduction in thermal conductivity (¿T) while preserving the high electrical conductivity of the films. The reduction in ¿T is modeled using the hydrodynamic heat transport equation, and it can be understood as a heat viscosity effect due to the 3D nanostructuration. In addition, the Seebeck coefficient is twice that of nanowires and films, and up to 50% higher than in a single crystal. This increase is interpreted as a nonequilibrium effect that the geometry of the structure induces on the distribution function of the phonons, producing an enhanced phonon drag. These thermoelectric metamaterials have higher performance and are fabricated with large areas by a cost-effective method, which makes them suitable for up-scale production, The authors acknowledge financial support from Spanish Ministerio de Ciencia, Innovación y Universidades under Grants [PID2020-118430GB-100, RTI2018-097876-B-C22 (MCIU/AEI/FEDER, UE), and RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE)] and the CSIC project 2DMESES. Cristina V. Manzano acknowledges funding from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract [2019-T1/IND-13541]. The authors ac knowledge the service from the MiNa Laboratory at IMN and funding from CM (project SpaceTec, [S2013/ICE2822]), MINECO (project [CSIC13-4E-1794]), and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Resonadores Microcapilares Transparentes para la Caracterización Multiparamétrica de Células

  • Martín-Pérez, Alberto
Tesis Doctoral inédita leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamento de Física de Materiales. Fecha de Lectura: 23-07-2021, Los microcanales suspendidos resonantes han demostrado ser una técnica muy útil para la detección y caracterización de partículas suspendidas en medios líquidos (especialmente células) a través de la medida de su masa. Gracias a la integración de un canal microfluídico dentro de un resonador mecánico, estos dispositivos permiten aprovechar la gran sensibilidad en masa de un resonador mecánico oscilando en vacío (o atmósfera gaseosa) mientras se trabaja con partículas o células suspendidas en un medio líquido (que fluye a través del microcanal integrado en el dispositivo). En los trabajos previos al desarrollo de esta tesis doctoral en este tipo de dispositivos, sólo podían medir la masa boyante de las partículas (diferencia entre la masa de la partícula y del líquido desplazado por la misma), no obstante, este parámetro no permite una distinción unívoca entre distintos tipos de partículas ya que, partículas distintas en tamaño y material pueden presentar el mismo valor de masa boyante. Para superar este problema, en la presente tesis doctoral, Resonadores Microcapilares Transparentes para la Caracterización Multiparamétrica de Células, se proponen nuevos conceptos para el desarrollo de microcanales suspendidos resonantes a fin de conseguir la medida simultánea de múltiples parámetros físicos de estas partículas coloidales, poniendo especial interés en su aplicación a la caracterización de células en entornos fisiológicos. Para ello, se ha desarrollado un proceso de fabricación de microcanales suspendidos resonantes basado en la integración de un capilar de sílice sobre un sustrato reflectante (resonador microcapilar transparente, RMT). Para la transducción de estos dispositivos se ha empleado un sistema interferométrico, que permite medir simultáneamente y en tiempo real la frecuencia de resonancia (señal mecánica) y la potencia de luz reflejada (señal óptica) por estos dispositivos., Este trabajo ha sido apoyado por el programa de investigación e innovación de la Unión Europea Horizon 2020 del European Research Council a través del proyecto Liquidmass (681275-LIQUIDMASS-ERC-CoG-2015). Así mismo, este trabajo ha contado con el apoyo del servicio de Micro y Nanofabricación (MiNa) del IMN, el cual está financiado por la Comunidad de Madrid a través del proyecto S2013/ICE-2822 (Space-Tec) con soporte de la UE (FEDER, FSE). También se ha contado con el apoyo del laboratorio X-SEM del IMN, el cual está financiado por el MINECO a través del proyecto CSIC13-4E-1794 con soporte de la Unión Europea (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Metallic Nanostructured Electrodes for in vivo and in vitro Electrical Stimulation

  • Mobini, Sahba
  • González Sagardoy, María Ujué
  • Caballero-Calero, Olga
  • Patrick, Erin E.
  • Martín-González, Marisol
  • García Martínez, Jorge Manuel
  • García-Martín, José Miguel
Trabajo presentado en la 31st Annual Conference of the European Society for Biomaterials, celebrada virtualmente del 5 al 9 de septiembre de 2021, The use of electricity in interaction with biological systems for therapeutic and diagnostic purposes become a prominent research topic. Electrodes are key components of electrical stimulation and recording devices for in vivo and in vitro usages. Bioelectrodes should present excellent electroconductivity to be able to transfer the electrical current efficiently (charge mobility inside the device). Moreover, they need to provide excellent electroactivity to convert electronic current to ionic current at the electrode/extracellular fluid (ECF) interphase. The use of nanostructures in fabrication of bioelectrodes is beneficial, since nanostructures offer superior effective surface area that decreases impedance (Z) and increases charge storage capacity (CSC) of the electrodes. Low Z prevents irreversible faradic reactions that are harmful for biological systems (safe stimulation), and decreases thermal noises that interfere recording bioelectrical signals. Higher CSC ensures effective charge transfer (effective stimulation)1. Here we developed highly pure metallic nanostructured electrodes from Ti, Au and Pt and characterized their electrochemical properties. Electrical stimulation (ES) modes for both in vitro and in vivo applications were simulated. Finally, we present the design of an in vitro ES platform incorporating nanostructured electrodes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reactive Accelerated Aging Test, A Time Machine to Evaluate the Durability of Biomaterials for Neural Implants

  • Limones-Ahijón, Blanca
  • García-Martín, José Miguel
  • González Sagardoy, María Ujué
  • Mobini, Sahba
Resumen del trabajo presentado en la 31st Annual Conference of the European Society for Biomaterials, celebrada virtualmente del 5 al 9 de septiembre de 2021, Neural implants are increasingly investigated to assist patients with defects or pathologies in nervous system. There is a growing research about developing new biomaterials to improve the effectiveness and biocompatibility of neural implants. For example, inflammatory responses to implantation of these devices, also called foreign body reactions (FBR), are still a challenge for their performance. During FBR, immune cells such as monocytes and macrophages are recruited and activated, leading to several consequences. One of those is the increased amount of reactive oxygen species (ROS) due to differentiation and phagocytosis of macrophages. ROS affects the performance of neural implants in the long-term by increasing corrosion and delamination. Reactive accelerated aging tests (RAAT) are used as a tool to test the durability of bioelectrodes and neural implants, mimicking the presence of ROS in vivo. In RAAT, an H2O2 solution with high temperature can mimic several years of implantation during a few weeks due to the increased reaction rate provided by temperature. A RAAT protocol for testing neural implants has been recently approved by FDA. In this work, we have built a RAAT setup based on this protocol. We have studied different parameters that affect the stability of the system and we have employed RAAT to analyse the durability of different flat and nanostructured metallic layers.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coexisting magnetic orders and concomitant Morin-like transition and relaxor behavior in multiferroic Aurivillius Bi4Ti3 - 2xNbxFexO12compounds

  • Algueró, Miguel
  • Pérez del Real, Rafael
  • Amorín, Harvey
  • Castro, Alicia
[EN] Aurivillius layered oxides with general formula (Bi2O2)(Am-1BmO3m+1) stand out among room-temperature magnetoelectric multiferroics for their large magnetization. However, despite extensive research, there is an obvious lack of understanding of their magnetism. The chemical design strategy for obtaining multiferroism involves the incorporation of M3+ magnetic cations at the B-site of well-known ferroelectric compounds such as Bi4Ti3O12 (m = 3). We report here a study of the magnetism and dielectric properties of Aurivillius Bi4Ti3 - 2xNbxFexO12 phases with x ≥ 1 up to 1.2, which correspond to magnetic cation fractions at the B site between 0.33 and 0.4 above the threshold for percolation. This is a three-layer system, less prone to the formation of intergrowths, which nominally contains Fe3+ as single magnetic species. Despite that, a rich phenomenology is uncovered. Coexisting magnetic orders are present in the Aurivillius compounds, and a Morin-like transition takes place at low temperatures. The dielectric characterization does not show any associated anomaly that could indicate a polymorphic phase transition but the appearance of relaxor-like characteristics. Possible scenarios are discussed, which involve the presence of Fe2+, cation partitioning between nonequivalent B-sites, and the development of polar nanodomains within a ferroelectric phase at a spin reorientation transition., Research funded by Spanish MICINN through Project No. MAT2017-88788-R. Technical support by Ms. I. Martínez at ICMM-CSIC was also recognized. Part of the FEG-SEM experiments were carried out as service from the MiNa Laboratory at IMN, which acknowledges funding from CM (Project No. S2018/NMT-4291 TEC2SPACE), MINECO (Project No. CSIC13-4E-1794), and EU (FEDER, FSE), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pepper-Mediated Green Synthesis of Selenium and Tellurium Nanoparticles with Antibacterial and Anticancer Potential

  • Shah, Veer
  • Medina Cruz, David
  • Vernet Crua, Ada
  • Truong, Linh B.
  • Sotelo, Eduardo
  • Mostafavi, Ebrahim
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
  • Cholula-Díaz, Jorge L.
  • Webster, Thomas J.
This article belongs to the Special Issue Functional Biomaterials and Biomaterial Composites with Antimicrobial Properties., The production of nanoparticles for biomedical applications (namely with antimicrobial and anticancer properties) has been significantly hampered using traditional physicochemical approaches, which often produce nanostructures with poor biocompatibility properties requiring post-synthesis functionalization to implement features that such biomedical applications require. As an alternative, green nanotechnology and the synthesis of environmentally friendly nanomaterials have been gaining attention over the last few decades, using living organisms or biomolecules derived from them, as the main raw materials to produce cost-effective, environmentally friendly, and ready-to-be-used nanomaterials. In this article and building upon previous knowledge, we have designed and implemented the synthesis of selenium and tellurium nanoparticles using extracts from fresh jalapeño and habanero peppers. After characterization, in this study, the nanoparticles were tested for both their antimicrobial and anticancer features against isolates of antibiotic-resistant bacterial strains and skin cancer cell lines, respectively. The nanosystems produced nanoparticles via a fast, eco-friendly, and cost-effective method showing different antimicrobial profiles between elements. While selenium nanoparticles lacked an antimicrobial effect at the concentrations tested, those made of tellurium produced a significant antibacterial effect even at the lowest concentration tested. These effects were correlated when the nanoparticles were tested for their cytocompatibility and anticancer properties. While selenium nanoparticles were biocompatible and had a dose-dependent anticancer effect, tellurium-based nanoparticles lacked such biocompatibility while exerting a powerful anti-cancer effect. Further, this study demonstrated a suitable mechanism of action for killing bacteria and cancer cells involving reactive oxygen species (ROS) generation. In summary, this study introduces a new green nanomedicine synthesis approach to create novel selenium and tellurium nanoparticles with attractive properties for numerous biomedical applications., The groups at CSIC and Tecnologico de Monterrey acknowledge the i-Link+2019 program (ref. LINKB20024 “NANOBIO-ROJA”) for financial support. CSIC authors thank the service from the MiNa Laboratory at IMN, funded from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-throughput determination of dry mass of single bacterial cells by ultrathin membrane resonators

  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Gil-Santos, Eduardo
  • Cano-Tortajada, Álvaro
  • San Paulo, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
How bacteria are able to maintain their size remains an open question. Techniques that can measure the biomass (dry mass) of single cells with high precision and high-throughput are demanded to elucidate this question. Here, we present a technological approach that combines the transport, guiding and focusing of individual bacteria from solution to the surface of an ultrathin silicon nitride membrane resonator in vacuum. The resonance frequencies of the membrane undergo abrupt variations at the instants where single cells land on the membrane surface. The resonator design displays a quasi-symmetric rectangular shape with an extraordinary capture area of 0.14 mm2, while maintaining a high mass resolution of 0.7 fg (1 fg = 10−15 g) to precisely resolve the dry mass of single cells. The small rectangularity of the membrane provides unprecedented frequency density of vibration modes that enables to retrieve the mass of individual cells with high accuracy by specially developed inverse problem theory. We apply this approach for profiling the dry mass distribution in Staphylococcus epidermidis and Escherichia coli cells. The technique allows the determination of the dry mass of single bacterial cells with an accuracy of about 1% at an unparalleled throughput of 20 cells/min. Finally, we revisit Koch & Schaechter model developed during 60 s to assess the intrinsic sources of stochasticity that originate cell size heterogeneity in steady-state populations. The results reveal the importance of mass resolution to correctly describe these mechanisms., This work was supported by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 731868—VIRUSCAN and by the ERC CoG Grant 681275 “LIQUIDMASS”. We acknowledge the service from the Micro and Nanofabrication Laboratory an X-SEM laboratory at IMN-CNM funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC13-4E-1794 with support from FEDER, FSE). E.G.S. acknowledges financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bacterial-mediated Selenium Nanoparticles as Highly Selective Antimicrobial Agents with Anticancer Properties

  • Medina Cruz, David
  • Truong, Linh B.
  • Sotelo, Eduardo
  • Martínez Orellana, Lidia
  • González Sagardoy, María Ujué
  • Huttel, Yves
  • Webster, Thomas J.
  • García-Martín, José Miguel
  • Cholula-Díaz, Jorge L.
The green synthesis of nanomaterials offers advantages over traditional chemical methods, such as the production of biocompatible nanostructures in an environmentally friendly and cost-effective manner. Among all of the available green synthesis routes, the use of bacteria offers a high-throughput and versatile synthesis of nanoparticles that can be used in a wide range of biomedical approaches. In this article, we present a controllable and versatile synthesis of selenium nanoparticles (SeNPs) using bacterial isolates of both Gram negative and Gram positive bacteria. The SeNPs were characterized in terms of their physicochemical properties and tested in both antimicrobial and cytotoxicity assays, showing a selective dose-dependent antibacterial activity in a selected range of concentrations (especially when SeNPs synthesized by a particular bacterial isolate were exposed to that isolate) and a mild cytotoxicity when exposed to human dermal fibroblasts. Furthermore, the SeNPs were tested for their anticancer activity by exposure to melanoma cells (skin cancer) in in vitro models, showing a significant dose¿response cytotoxic behavior that was associated to the production of reactive oxygen species. Therefore, this work presents a robust and versatile method to produce SeNPs using selected bacterial isolates for numerous biomedical applications., The authors from Tecnologico de Monterrey and CSIC thank the bilateral project BILTC22001 for funding. The authors from Tecnologico de Monterrey also thank the Department of Sciences – Chemistry and Nanotechnology at Tecnologico de Monterrey, campus Monterrey. TJW thanks Art Zaropoulo for funding. The authors acknowledge the service from the MiNa Laboratory at IMN, funded from CM (project SpaceTec, S2018/ NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Spherical gallium nanodroplets

  • García Martínez, Jorge Manuel
  • Fuster, David
  • Dotor-Castilla, María Luisa
  • Méndez, Javier
  • González Díez, Yolanda
Trabajo presentado en el 21st European Workshop on Molecular Beam Epitaxy (EuroMBE 2023), celebrado en Madrid (España), del 16 al 19 de abril de 2023, Gallium (Ga) nanoparticles has unique characteristics that could enable new devices based on phase changes, such as optical switches and memories and active plasmonic platforms [1]. Gallium is also a very interesting material for its biocompatibility properties and many other applications [2]. We show the fabrication by MBE of gallium nanodroplets on GaAs(001) by droplet epitaxy [3, 4]. Furthermore, it is possible to control the shape of the nanodroplets by changing the wettability of Ga over the surface by evaporation of one monolayer of carbon [3] prior to the droplet formation. This effect is used for obtaining almost perfectly spherical Ga nanodroplets on GaAs and could be used in many other substrates. We acknowledge the following projects: MAT2015-67021-R, S2018/NMT-4291 TEC2SPACE, CSIC13- 4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308. References [1] Maria Losurdo, et al., ¿Thermally stable coexistence of liquid and solid phases in gallium nanoparticles¿, Nature Mat., Vol. 15, pp. 995-1002, 2016. [2] Michael D. Dickey, ¿Liquid metals at room temperature¿, Physics Today Vol. 74, 4, pp. 30- 36, 2021. [3] D. Fuster et al., ¿Optimization of a carbon evaporator cell for MBE growth¿, Vacuum, Vol. 181, pp. 109653(1)-109653(8), 2020. [4] D. Fuster, et al., ¿Fundamental role of arsenic flux in nanohole formation by Ga droplet etching on GaAs (001),¿ Nanoscale Res Lett. Vol. 9, pp. 309(1)-309(6), 2014., Service from the MiNa Laboratory at IMN (funding from CM), X-SEM Laboratory and funding projects MAT2015-67021-R, S2018/NMT-4291, TEC2SPACE, CSIC13-4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Domain wall propagation and pinning induced by current pulses in cylindrical modulated nanowires

  • Bran, Cristina
  • Fernández-Roldán, José A.
  • Moreno, J. A.
  • Fraile Rodríguez, A.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Saugar, Elías
  • Marqués-Marchán, Jorge
  • Foerster, Michael
  • Aballe, Lucía
  • Kosel, J.
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
The future developments in 3D magnetic nanotechnology require the control of domain wall dynamics by means of current pulses. While this has been extensively studied in 2D magnetic strips (planar nanowires), few reports on this exist in cylindrical geometry, where Bloch point domain walls are expected to have intriguing properties. Here, we report an investigation on cylindrical magnetic Ni nanowires with geometrical notches. An experimental work based on synchrotron X-ray magnetic circular dichroism (XMCD) combined with photoemission electron microscopy (PEEM) indicates that large current densities induce domain wall nucleation, while smaller currents move domain walls preferably antiparallel to the current direction. In the region where no pinning centers are present, we found a domain wall velocity of about 1 km s. Thermal modelling indicates that large current densities temporarily raise the temperature in the nanowire above the Curie temperature, leading to nucleation of domain walls during the system cooling. Micromagnetic modelling with a spin-torque effect shows that for intermediate current densities, Bloch point domain walls with chirality parallel to the Oersted field propagate antiparallel to the current direction. In other cases, domain walls can be bounced from the notches and/or get pinned outside their positions. We thus found that current is not only responsible for domain wall propagation, but also is a source of pinning due to the Oersted field action., Grants PID2019-108075RB-C31 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and S2018/NMT-4321 NANOMAGCOST-CM funded by the Government of Madrid Region, Spain. We acknowledge the service from the MiNa Laboratory at IMN and the funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)., Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d3nr00455d, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanomechanical Sensing for Mass Flow Control in Nanowire-Based Open Nanofluidic Systems

  • Escobar, Javier Enrique
  • Molina Fernández, Juan
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Open nanofluidic systems, where liquids flow along the outer surface of nanoscale structures, provide otherwise unfeasible capabilities for extremely miniaturized liquid handling applications. A critical step toward fully functional applications is to obtain quantitative mass flow control. We demonstrate the application of nanomechanical sensing for this purpose by integrating voltage-driven liquid flow along nanowire open channels with mass detection based on flexural resonators. This approach is validated by assembling the nanowires with microcantilever resonators, enabling high-precision control of larger flows, and by using the nanowires as resonators themselves, allowing extremely small liquid volume handling. Both implementations are demonstrated by characterizing voltage-driven flow of ionic liquids along the surface of the nanowires. We find a voltage range where mass flow rate follows a nonlinear monotonic increase, establishing a steady flow regime for which we show mass flow control at rates from below 1 ag/s to above 100 fg/s and precise liquid handling down to the zeptoliter scale. The observed behavior of mass flow rate is consistent with a voltage-induced transition from static wetting to dynamic spreading as the mechanism underlying liquid transport along the nanowires., This work was supported by European Research Council through ERC CoG Grant 681275; project PID2021- 128395OB-I00 funded by MCIN/AEI/10.13039/ 501100011033/FEDER, UE; Projects PDC2022-133944-I00 and PLEC2021-007892 funded by MCIN/AEI/10.13039/ 501100011033 and European Union “NextGenerationEU”/ PRTR; Project Y2020/BIO-65194 funded by Comunidad de Madrid; Grant RYC-2019-026626-I funded by MCIN; Project AES (DTS21/00136) funded by ISCIII/Unión Europea/ FEDER. We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2- SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid hydrogels support neural cell culture development under magnetic actuation at high frequency

  • Martínez-Ramírez, Julia
  • Toldos-Torres, Marta
  • Benayas, Esther
  • Villar-Gómez, Natalia
  • Fernández-Méndez, Laura
  • Espinosa, Francisco M.
  • García García, Ricardo
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
  • Serrano, María C.
The combination of hydrogels and magnetic nanoparticles, scarcely explored to date, offers a wide range of possibilities for innovative therapies. Herein, we have designed hybrid 3D matrices integrating natural polymers, such as collagen, chitosan (CHI) and hyaluronic acid (HA), to provide soft and flexible 3D networks mimicking the extracellular matrix of natural tissues, and iron oxide nanoparticles (IONPs) that deliver localized heat when exposed to an alternating magnetic field (AMF). First, colloidally stable nanoparticles with a hydrodynamic radius of ∼20 nm were synthesized and coated with either CHI (NPCHI) or HA (NPHA). Then, collagen hydrogels were homogeneously loaded with these coated-IONPs resulting in soft (E0 ∼ 2.6 kPa), biodegradable and magnetically responsive matrices. Polymer-coated IONPs in suspension preserved primary neural cell viability and neural differentiation even at the highest dose (0.1 mg Fe/mL), regardless of the coating, even boosting neuronal interconnectivity at lower doses. Magnetic hydrogels maintained high neural cell viability and sustained the formation of highly interconnected and differentiated neuronal networks. Interestingly, those hydrogels loaded with the highest dose of NPHA (0.25 mgFe/mg polymer) significantly impaired non-neuronal differentiation with respect to those with NPCHI. When evaluated under AMF, cell viability slightly diminished in comparison with control hydrogels magnetically stimulated, but not compared to their counterparts without stimulation. Neuronal differentiation under AMF was only affected on collagen hydrogels with the highest dose of NPHA, while non-neuronal differentiation regained control values. Taken together, NPCHI-loaded hydrogels displayed a superior performance, maybe benefited from their higher nanomechanical fluidity. STATEMENT OF SIGNIFICANCE: Hydrogels and magnetic nanoparticles are undoubtedly useful biomaterials for biomedical applications. Nonetheless, the combination of both has been scarcely explored to date. In this study, we have designed hybrid 3D matrices integrating both components as promising magnetically responsive platforms for neural therapeutics. The resulting collagen scaffolds were soft (E0 ∼ 2.6 kPa) and biodegradable hydrogels with capacity to respond to external magnetic stimuli. Primary neural cells proved to grow on these substrates, preserving high viability and neuronal differentiation percentages even under the application of a high-frequency alternating magnetic field. Importantly, those hydrogels loaded with chitosan-coated iron oxide nanoparticles displayed a superior performance, likely related to their higher nanomechanical fluidity., The MiNa Laboratory at IMN-CSIC acknowledges its funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). Authors are grateful to Inmaculada Aranaz from the Universidad Complutense de Madrid for assistance with chitosan characterization studies. EB acknowledges Ministerio de Ciencia e Innovación of Spain for an FPI fellowship associated to grant PID2020-113480RB-I00. MTT acknowledges Comunidad de Madrid for a contract from the Programa Investigo and NVG and JMR acknowledge CSIC for a JAE-Intro ICU and a JAE-Intro ICU Nanomed CSIC Hub fellowships, respectively., This work has received funding from the European Union's Horizon Europe research and Innovation Programme under grant agreement No. 101098597. It has been also supported by grant PID2020-113480RB-I00 funded by MCIN/AEI/10.13039/501100011033/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ether cleavage and chemical removal of SU-8

  • Ripalda, José María
  • Álvaro Bruna, Raquel
  • Dotor-Castilla, María Luisa
The high chemical stability of SU-8 makes it irreplaceable for a wide range of applications, most notably as a lithography photoresist for micro and nanotechnology. This advantage becomes a problem when there is a need to remove SU-8 from the fabricated devices. Researchers have been struggling for two decades with this problem, and although a number of partial solutions have been found, this difficulty has limited the applications of SU-8. Here we demonstrate a fast, reproducible, and comparatively gentle method to chemically remove SU-8 photoresist. An ether cleavage mechanism for the observed reaction is proposed, and the hypothesis is tested with ab initio quantum chemical calculations. We also describe a complementary removal method based on atomic hydrogen inductively coupled plasma., Funding was provided by the Comunidad de Madrid (P2018/EMT- 4308), the Spanish Ministerio de Ciencia e Innovación (MCIU-AEI) and the European Union (FEDER) through projects PID2021-124193OB-C22 and TED2021-130623B-I00. We acknowledge the service from the MiNa Laboratory at IMN made possible by funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Detección de Modos de Vibración de Células Tumorales mediante Resonadores Micromecánicos

  • Puerto Belda, Verónica
Trabajo presentado para lograr el título de Doctor por la Universidad Autónoma de Madrid, Departamentos de Física de la Materia Condensada y Física Teórica de la Materia Condensada, Programa de Doctorado en Física de la Materia Condensada, Nanociencia y Biofísica.--2023-10-27.--©2023 Verónica Puerto Belda Todos los derechos reservados / All rights reserved, Todos los objetos presentan modos de vibración que dependen de sus propiedades mecánicas, densidad, tamaño y forma. Un caso práctico en el que se emplean estos modos son los resonadores micro y nanomecánicos, los cuales han demostrado ser una herramienta muy útil para la detección y caracterización de entidades biológicas. En concreto, en los últimos años se ha logrado medir la masa, las propiedades mecánicas y vibracionales de entidades biológicas muy variadas. Al centrarse en las propiedades vibracionales de entidades biológicas, se ha conseguido medir la frecuencia de resonancia y el factor de calidad de modos de vibración de bacterias en aire. Desde hace más de medio siglo se cuestiona si las células exhiben modos de vibración. Ahora bien, la dificultad de medir las propiedades vibracionales de una célula viva en sus condiciones fisiológicas ha generado dificultades a la hora de responder esa cuestión. La necesidad de sumergir el dispositivo de medida y la célula en el medio de cultivo correspondiente, produce una gran disipación de energía debido a la presión hidrodinámica, dificultando la obtención de una respuesta concluyente. Por otra parte, las células eucariotas son estructuras extremadamente complejas que contienen múltiples estructuras internas. En su interior coexisten las fases sólida y líquida, y su respuesta ante estímulos mecánicos muestra un comportamiento viscoelástico. En consecuencia, en el caso de que las células vivas eucariotas puedan manifestar modos de vibración, su huella sería sumamente sutil debido a la importante disipación de energía que se produce como resultado de la viscoelasticidad celular y el amortiguamiento hidrodinámico del fluido circundante., En la presente tesis doctoral, se han observado esas huellas sutiles y se ha conseguido determinar las propiedades vibracionales de células humanas epiteliales de mama vivas en sus condiciones fisiológicas, confirmando la existencia de modos de vibración en la célula eucariota. Para ello, se ha medido el espectro de frecuencia de las fluctuaciones térmicas de las deflexiones de una micropalanca, en el medio de cultivo correspondiente, antes y después de adherir una única célula a la superficie funcionalizada del resonador. Al analizar las fluctuaciones térmicas de la palanca con la célula adherida en el rango de altas frecuencias, 5 − 800 kHz, se han observado anomalías que están relacionadas con la existencia de modos de vibración de la célula. Para poder entender estas anomalías, ha sido necesario el desarrollo de un modelo teórico que explique la interacción mecánica entre la célula viva (material viscoelástico) y el resonador en un amplio rango de frecuencias. A partir del modelo se consigue obtener la frecuencia de resonancia y la disipación de los dos modos de vibración principales de la célula viva adherida al resonador durante el proceso de adhesión, además de otros parámetros físicos. El método aplica para una célula viva individual adherida a un resonador. Adicionalmente, se han utilizado células humanas epiteliales de mama con distinto grado de malignidad: sanas (MCF-10A), tumorales no invasivas (MCF-7) y metastásicas (MDA-MB-231). Curiosamente, al analizar cada línea celular de forma individual, se han logrado observar diferencias entre las propiedades vibracionales de las células humanas epiteliales de mama sanas y tumorales, abriendo muchas vías para la comprensión de la mecanobiología de una única célula, el fingerprinting físico, así como terapias de ultrasonido., Este trabajo se ha llevado a cabo gracias a la beca predoctoral para la formación de investigadores (FPI, PRE2019-087448) a través del proyecto RTI2018-099369-B-I00. Y ha sido apoyada por el programa de investigación e innovación de la Unión Europea Horizon 2020 mediante el proyecto European Research Council 731868-VIRUSCAN y la Asociación Elena Torres por la investigación contra el cáncer. Agradecer el servicio del laboratorio X-SEM del IMN-CNM financiado por la Comunidad de Madrid (Proyecto S2018/NMT- 4291 TEC2SPACE) y por el MINECO (Proyecto CSIC13-4E- 1794 con apoyo de FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rapid and simple viral protein detection by functionalized 2D MoS2/graphene electrochemiluminescence aptasensor

  • Gutiérrez-Gálvez, Laura
  • El Hajioui-El Ghalbzouri, Hanaa
  • Enebral-Romero, Estefanía
  • Garrido, Marina
  • Naranjo, Alicia
  • López-Diego, David
  • Luna, Mónica
  • Pérez, Emilio M.
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work we present the development of an electrochemiluminescence aptasensor based on electrografting molybdenum disulphide nanosheets functionalized with diazonium salt (MoS2-N2+) upon screen-printed electrodes of graphene (SPEs GPH) for viral proteins detection. In brief, this aptasensor consists of SPEs GPH electrografted with MoS2-N2+ and modified with a thiolated aptamer, which can specifically recognize the target protein analyte. In this case, we have used SARS-CoV-2 spike protein as model protein. Electrochemiluminescence detection was performed by using the [Ru(bpy)3]2+/TPRA (tripropylamine) system, which allows the specific detection of the SARS-CoV-2 spike protein easily and rapidly with a detection limit of 9.74 fg/mL and a linear range from 32.5 fg/mL to 50.0 pg/mL. Moreover, the applicability of the aptasensor has been confirmed by the detection of the protein directly in human saliva samples. Comparing our device with a traditional saliva antigen test, our aptasensor can detect the spike protein even when the saliva antigen test gives a negative result., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T) and Community of Madrid (TRANSNANOAVANSENS (S2018/NMT-4349) and FotoArt (P2018/NMT-4367)). E.M.P. acknowledges funding from the Ministerio de Ciencia, Innovación y Universidades (PID2020-116661RB-I00), and Comunidad de Madrid “Materiales Disruptivos Bidimensionales (2D)” (MAD2D-CM)-UAM and (MAD2D-CM)-IMDEA-NC funded by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanoscience acknowledges support from the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D CEX2020-001039-S. We also acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance and Relative Humidity Impact of Cellulose-Derivative Networks in All-Day Passive Radiative Cooling

  • Manzano, Cristina V.
  • Díaz-Lobo, Alba
  • Gil-García, Marta
  • Rodríguez de la Fuente, Óscar
  • Morales-Sabio, Ángel
  • Martín-González, Marisol
All-day passive daytime radiative coolers (PDRC) offer a promising solution for energy-free cooling of buildings and devices. This study investigates the use of various cellulose-derivative networks to achieve optimal and stable cooling performance. These results showed that the mixed cellulose ester network has a maximum solar reflectance of 97%. While cellulose acetate network has a maximum infrared emissivity of 96% in the atmospheric transparency window band, which is a near-perfect infrared emitter, the nitrocellulose network shows the highest cooling temperature, with a significant reduction of 14 °C from the ambient temperature and a power of 124 W·m−2 during the daytime and at night of 7.7 °C and 72.8 W·m−2. This study also analyzes the dampness's effect on the cooling performance of cellulose-derivative networks. The cooling performance of the nitrocellulose network drops ≈ 3 °C (from 14 to 11.3 °C) when the relative humidity of the day exceeds ≈ 30% is observed. These findings indicate that the capacity of a material to absorb water from the surrounding air significantly influences its performance as a passive cooler, primarily due to changes in its optical properties. This is an important insight, as it highlights the need to consider environmental factors like relative humidity and sample hydrophobicity for PDRC systems., C.V.M acknowledges financial support from “ERC Consolidator Grant No.101087974 COOLed” and from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract 2019-T1/IND-13541. M.S.M.G acknowl-edge the MERGE project PID2020-118430GB-100. The authors acknowl-edge the service from the MiNa Laboratory at IMN, and funding from CM(project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794)and EU (FEDER, FSE). And the CSIC for the article processing charges., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metallic Coatings Boost the Cooling Power of Nanoporous Alumina

  • Díaz-Lobo, Alba
  • Martín-González, Marisol
  • Song, Qimeng
  • Morales-Sabio, Ángel
  • Retsch, Markus
  • Manzano, Cristina V.
Passive daytime radiative cooling (PDRC) has emerged as a promising strategy to mitigate the increasing impact of heat waves. However, achieving effective PDRCs requires cost-effective, ecofriendly, and industrially scalable materials. In this study, we investigate the potential of anodic aluminum oxide (AAO) nanostructures coated with metals as passive radiative coolers. We explore the effects of different metallic coatings (Al and Au) with varying thicknesses (ranging from 20 to 100 nm) on the cooling performance of the AAO nanostructures. Our finding reveals a maximum temperature reduction (ΔT) of 12.5 °C for 60 nm of Au coating. Furthermore, we demonstrate the dependence of the cooling performance on ambient temperature, emphasizing the practical benefits of these enhanced AAO-based radiative coolers for real-world applications. Notably, our results surpass previous works, offering an avenue to enhance the PDRC capability., The authors would like to acknowledge financial support from“Atracción de Talento Investigador” de la Comunidad deMadrid, contract 2019-T1/IND-13541 and the iMOVE23088CSIC grant. We acknowledge the service from the MiNaLaboratory at IMN and funding from CM (project SpaceTec,S2013/ICE2822), MINECO (project CSIC13-4E-1794), andEU (FEDER, FSE). Q.S. and M.R. acknowledge financialsupport from the European Research Council (ERC) underthe European Union’s Horizon 2020 research and innovationprogram (grant agreement no. 101082087). We also acknowl-edge support of the publication fee by the CSIC Open AccessPublication Support Initiative through its Unit of InformationResources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bismuthene - Tetrahedral DNA nanobioconjugate for virus detection

  • Enebral-Romero, Estefanía
  • García-Fernández, Daniel
  • Gutiérrez-Gálvez, Laura
  • López-Diego, David
  • Luna, Mónica
  • García-Martín, Adrián
  • Salagre, Elena
  • Michel, Enrique G.
  • Torres, Íñigo
  • Zamora, Félix
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work, we present an electrochemical sensor for fast, low-cost, and easy detection of the SARS-CoV-2 spike protein in infected patients. The sensor is based on a selected combination of nanomaterials with a specific purpose. A bioconjugate formed by Few-layer bismuthene nanosheets (FLB) and tetrahedral DNA nanostructures (TDNs) is immobilized on Carbon Screen-Printed Electrodes (CSPE). The TDNs contain on the top vertex an aptamer that specifically binds to the SARS-CoV-2 spike protein, and a thiol group at the three basal vertices to anchor to the FLB. The TDNs are also marked with a redox indicator, Azure A (AA), which allows the direct detection of SARS-CoV-2 spike protein through changes in the current intensity of its electrolysis before and after the biorecognition reaction. The developed sensor can detect SARS-CoV-2 spike protein with a detection limit of 1.74 fg mL-1 directly in nasopharyngeal swab human samples. Therefore, this study offers a new strategy for rapid virus detection since it is versatile enough for different viruses and pathogens., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T), Spanish Ministry of Science, Innovation and Universities (TED2021-129738B–I00) and Community of Madrid (REACT-UE NANOCOV-CM, TRANSNANOAVANSENS, S2018/NMT-4349). Estefanía Enebral-Romero thanks the financial support of “Nanotecnología para detección del SARS-CoV-2 y sus variantes. NANOCOV” project and a contract as a predoctoral researcher funded by grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. Laura Gutiérrez-Gálvez was supported by a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Daniel García-Fernández and Adrián García-Martín were supported by a Programa Investigo grant from Autonomous Community of Madrid in the framework of the Plan de Recuperación, Transformación y Resiliencia financed by the European Union – NextGenerationEU (09-PIN1-00013.4/2022- 83rd and 66rd place, respectively). The authors acknowledge the support of the European Union (EU) and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. F. Z. acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M, PDC2021-120782-C21, and PID2022-138908NB-C31), the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. F.Z. also acknowledge support from the European Innovation Council under grant Agreement 101047081 (EVA). EGM acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M) and through grant PID2021-123295NB-I00. We also acknowledge María U. González help with Fluorescence Microscopy and the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

All-Optical Domain Inversion in LiNbO3 Crystals by Visible Continuous-Wave Laser Irradiation

  • Sebastián-Vicente, Carlos
  • Imbrock, Jörg
  • Laubrock, Simon
  • Caballero-Calero, Olga
  • García-Cabañes, Ángel
  • Carrascosa, Mercedes
LiNbO3 is a distinguished multifunctional material where ferroelectric domain engineering is of paramount importance. This degree of freedom of the spontaneous polarization remarkably enhances the applicability of LiNbO3, for instance, in photonics. In this work, we report the first method for all-optical domain inversion of LiNbO3 crystals using continuous-wave visible light. While we focus mainly on iron-doped LiNbO3, the applicability of the method is also showcased in undoped congruent LiNbO3. The technique is simple, cheap, and readily accessible. It relies on ubiquitous elements: a light source with low/moderate intensity, basic optics, and a conductive surrounding medium, e.g., water. Light-induced domain inversion is unequivocally demonstrated and characterized by combination of several experimental techniques: selective chemical etching, surface topography profilometry, pyroelectric trapping of charged microparticles, scanning electron microscopy, and 3D Čerenkov microscopy. The influence of light intensity, exposure time, laser spot size, and surrounding medium is thoroughly studied. To explain all-optical domain inversion, we propose a novel physical mechanism based on an anomalous interplay between the bulk photovoltaic effect and external electrostatic screening. Overall, our all-optical method offers straightforward implementation of LiNbO3 ferroelectric domain engineering, potentially sparking new research endeavors aimed at novel optoelectronic applications of photovoltaic LiNbO3 platforms., Financial support for this research project is gratefullyacknowledged: grant PID2020-116192RB-I00 by MCIN/AEI/10.13039/501100011033 and grant TED2021-129937B−I00by MCIN/AEI/10.13039/501100011033 and EU (FEDER,FSE). C.S.-V. also thanks financial support through his FPUcontract (FPU19/03940) and his grant for a research stay inMü nster (EST23/00644). Also, the authors acknowledge theservice from the MiNa Laboratory at IMN, and funding fromCM (project S2018/NMT-4291 TEC2SPACE), MINECO(project CSIC13-4E-1794), and EU (FEDER, FSE). Likewise,the authors express their gratitude to Fernando Moreno forkindly conducting the surface profilometry measurements, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rapid mechanical phenotyping of breast cancer cells based on stochastic intracellular fluctuations

  • Cano-Tortajada, Álvaro
  • Yubero, Marina L.
  • Millá, Carmen
  • Puerto Belda, Verónica
  • Ruz Martínez, José Jaime
  • Kosaka, Priscila M.
  • Calleja, Montserrat
  • Malumbres, Marcos
  • Tamayo de Miguel, Francisco Javier
Predicting the phenotypic impact of genetic variants and treatments is crucial in cancer genetics and precision oncology. Here, we have developed a noise decorrelation method that enables quantitative phase imaging (QPI) with the capability for label-free noninvasive mapping of intracellular dry mass fluctuations within the millisecond-to-second timescale regime, previously inaccessible due to temporal phase noise. Applied to breast cancer cells, this method revealed regions driven by thermal forces and regions of intense activity fueled by ATP hydrolysis. Intriguingly, as malignancy increases, the cells strategically expand these active regions to satisfy increasing energy demands. We propose parameters encapsulating key information about the spatiotemporal distribution of intracellular fluctuations, enabling precise phenotyping. This technique addresses the need for accurate, rapid functional screening methods in cancer medicine., This work was partially supported by the Spanish Science and Innovation Ministry through projects RTI2018-099369-B-I00 (related doctoral fellowship [FPI] PRE2019-087448), AES (DTS21/00136)/ISCIII/EU/FEDER, “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE), “ONCOLIGHT” (PDC2022-133503- I00/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR), and “ONCODEEPLASM” (PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid (Y2020/BIO- 65194 scCANCER-CM). This work has also been supported by private FERO Foundation and Elena Torres Cancer Association funding. We acknowledge the service from the Micro and Nanofabrication Laboratory and X-SEM laboratory at IMN-CNM funded by the Comunidad Autónoma de Madrid (project S2018/NMT-4291 TEC2SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermoelectric bismuth telluride nanostructures fabricated by electrodeposition within flexible templates

  • Cerviño Solana, Pablo
  • Ramírez-Peral, María Jesús
  • Martín-González, Marisol
  • Caballero-Calero, Olga
Bismuth telluride, a highly efficient thermoelectric material, stands out for applications around room temperature in wearable devices. By harnessing the thermal gradient established between the human body and ambient temperature, we can generate useable electricity. Notably, bismuth telluride nanostructures exhibit significantly lower thermal conductivities compared to their bulk counterparts. As a result, the thermoelectric efficiency achieved is notably higher. Our research focuses on developing efficient nanostructured materials based on bismuth telluride inside a flexible substrate made of polyester. We employ scalable methods, such as template-assisted electrochemical deposition, to fabricate these nanostructures. In this study, we present an approach to the development of flexible nanostructured thermoelectric materials. Despite using a reduced quantity of active material, our electrochemically deposited nanostructures inside a flexible template demonstrate a remarkable performance. They exhibit 24 % of the Power Factor reported for conventional electrochemically fabricated Bi2Te3 thin films, and notably, they even surpass the Power Factor reported for flexible Bi2Te3-based inks used in the creation of flexible generators. This achievement underscores the potential of our method in the advancement of efficient, flexible thermoelectric devices., This work has been supported by the Ramon Areces Foundation through the micro-TENERGY project. The authors would like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). We also acknowledge the funding by the MINECO under grant number PID2020-118430 GB-100. O.C–C would also like to acknowledge fruitful discussions with David López Romero and the assistance with the SEM microscope from Raquel Álvaro Bruna., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polylactic acid 3D interconnected nanonetworks as high reflectance distributed Bragg reflectors

  • Resende, Pedro M.
  • Martín-González, Marisol
Natural systems found ways to exploit light at the nanoscale, devising complex 3D structures that behave as photonic crystals, able to produce structural coloration. Distributed Bragg reflectors are a particular example of 1D photonic crystals, used in different applications, including structural coloration. Currently distributed Bragg reflectors rely on multi-material deposition or material doping to achieve high refractive index contrast, unlike the biological counterparts that often rely on single-materials through structural variations. In this work, we report single-material polymeric distributed Bragg reflectors fabricated from the infiltration of polylactic acid into 3D anodic aluminium oxide templates. These templates act as sacrificial scaffolds for the nanostructuration of the polymeric material, generating a 3D polymer network with periodic modulations. The obtained structures present very high reflectance, above 95%, with a low number of periods around 20 repeating layers. These structures offer a new approach to the generation of flexible single-material DBRs with high reflectance, an important issue in all-polymer photonic systems., M. S. M. G wants to acknowledge the MINECO project PID2020- 118430GB-100 for financial support. The authors acknowledge also the service from the MiNa Laboratory at IMN, and funding CM (project SpaceTec, S2013/ICE2822), MINECO (Project CSIC13-4E-1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shedding Light on the Mid-Infrared Complex Refractive Index of Anodic Aluminum Oxide

  • Díaz-Lobo, Alba
  • Castro-Fernández, Irene
  • Blanco, Eduardo
  • Ramos Vega, Daniel
  • Martín-González, Marisol
  • Manzano, Cristina V.
In the current scientific landscape, the understanding of optical properties in the mid-infrared (mid-IR) range (3–30 µm) is crucial in simulations and models to explore the potential of materials for various applications. However, due to the challenges associated with mid-IR characterization, accurate refractive index (n) and extinction coefficient (κ) data are often lacking in the literature. This study addresses this gap by investigating the mid-IR n and κ spectra of anodic aluminum oxide (AAO) nanostructures anodized under different conditions, using two distinct approaches: IR ellipsometry and a theoretical model based on multilayer reflection and effective medium. The results demonstrate a strong agreement: the anodizing conditions have a significant influence on the optical properties of the AAO nanostructures. These differences enable accurate simulations of the emissivity spectra of AAO nanostructures on Al foils, which align closely with experimental measurements. This theoretical approximation is versatile and extensible to a broad range of materials. Different materials are tested, namely, a sapphire, a polycarbonate film, and a polyethylene terephthalate (PET) film achieving a useful qualitative description. This study paves the way for a novel approach in the engineering of new micro and nano-optical materials, facilitating their evaluation for suitability in mid-IR applications., C.V.M. acknowledges financial support from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract 2019-T1/IND-13541. The authors acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). This study was partially supported by the Spanish Ministry of Science under project OMNIPATH (reference PID2020-119587RB-I00. I.C. acknowledges the funded by Formación de Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities, reference FPU21/03180. M.M.G. acknowledged the Ministerio de Ciencia e Innovación with the Merge Project (PID2020118430GB-I00). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tetrahedral DNA nanostructures, graphene and carbon nanodots-based electrochemiluminescent biosensor for BRCA1 gene mutation detection

  • García-Fernández, Daniel
  • Gutiérrez-Gálvez, Laura
  • López-Diego, David
  • Luna, Mónica
  • Torres, Íñigo
  • Zamora, Félix
  • Solera, Jesús
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this study, we present a novel electrochemiluminescent DNA biosensor designed for detecting breast cancer type 1 (BRCA1) gene mutations. The biosensor integrates graphene nanosheets (Graph-NS), tetrahedral DNA nanostructures (TDNs), and carbon nanodots (CNDs) to enhance sensitivity and specificity. Graph-NS are employed to structure the transducer and serve as a platform for DNA immobilization. TDNs are engineered with a BRCA1 gene-specific capture probe located at the apex (TDN-BRCA1), facilitating efficient biorecognition. Additionally, the basal vertices of TDNs are functionalized with amino groups, enabling their attachment to the CSPE/Graph-NS surface via amino-graphene interaction. This platform effectively identifies single-base mutations in the BRCA1 gene utilizing synthesized CNDs as a coreactant and [Ru(bpy)3]2+ as the luminophore through the coreactant pathway. The developed biosensor demonstrates exceptional sensitivity and can detect a single mutation in the BRCA1 gene. Furthermore, it has been successfully validated in real samples obtained from breast cancer patients, showcasing a remarkable detection limit of 1.41 aM., The Spanish Ministry of Economy and Competitiveness has financially supported this work (PID2020-116728RB-I00, PID2023-150844OB-I00, RED2022-134120-T and TED2021-129738B–I00). Spanish Ministry of Universities supported Laura Gutiérrez-Gálvez with a FPU (FPU19/06309). European Union, through Autonomous Community of Madrid supported Daniel García-Fernández with a Programa Investigo grant in from the Plan de Recuperación, Transformación y Resiliencia– NextGenerationEU (09-PIN1-00013.4/2022-Puesto 83). The authors acknowledge the support of the EU and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. The authors also appreciate the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MINECO (project CSIC13-4E-1794) and CM (project S2018/NMT-4291 TEC2SPACE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Espectrometría de masas nanomecánica de alta eficiencia para la caracterización de poblaciones bacterianas

  • Sanz Jiménez, Adrián
Trabajo presentado para lograr el título de Doctor por la Universidad Autónoma de Madrid, Departamentos de Física de la Materia Condensada y Física Teórica de la Materia Condensada, Facultad de Ciencias, Programa de Doctorado en Física de la Materia Condensada, Nanociencia y Biofísica, Este trabajo ha sido apoyado por el programa de investigación e innovación de la Unión Europea Horizon 2020 a través del proyecto ViruScan (731868-VIRUSCAN-FETPROACT) y mediante el proyecto de investigación VIROMECH (PDC2022- 133944-100), financiado por MCIN/AEI/10.13039/501100011033 y Unión Europea “NextGeneration EU”/PRTR. Así mismo, este trabajo ha contado con el apoyo del laboratorio X-SEM del IMN, el cual está financiado por la Comunidad de Madrid (Proyecto S2018/NMT-4291 TEC2SPACE) y por el MINECO (Proyecto CSIC13-4E-1794 con apoyo de FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advancing diagnostics with BODIPY-bismuthene DNA biosensors

  • Gutiérrez-Gálvez, Laura
  • Enebral-Romero, Estefanía
  • Valle Amores, Miguel Ángel
  • Pina Coronado, Clara
  • Torres, Iñigo
  • López-Diego, David
  • Luna, Mónica
  • Fraile, Alberto
  • Zamora, Félix
  • Alemán, José
  • Álvarez, Jesús
  • Capitán, M. J.
  • Lorenzo, Encarnación
  • García-Mendiola, Tania
In this work, an electrochemical biosensor is prepared based on few-layer bismuthene hexagons (FLBHs) and a water-soluble BODIPY (BDP) derivative (BDP-NaSO3) for early infection diagnosis. In particular, the detection in advance of a virus sequence in nasopharyngeal swab samples was developed. The combination of the FLBHs and BDP-NaSO3 facilitates the direct, sensitive, and specific detection of gene viruses without the need for any prior amplification step. This work demonstrates that the FLBHs provide an improved electrochemical platform for immobilizing thiolated DNA capture probes that increase the sensitivity of the biosensor, while BDP-NaSO3 serves as a newly powerful electrochemical indicator of the hybridization event. As a proof of concept, SARS-CoV-2 was selected as the model virus. The developed biosensor demonstrated selective, rapid, and straightforward detection of the specific sequence RNA-dependent RNA-polymerase (RdRp) of SARS-CoV-2 with a detection limit of 4.97 fM and a linear range from 16.6 fM to 100 fM. Furthermore, this platform successfully detects the virus directly in nasopharyngeal swab samples with a viral load of at least 19 Cts without being subjected to any prior amplification stage. Finally, the high stability of the biosensor response, which has been working under ambient conditions for over one month, the selectivity and rapidity for specific virus detection, and the requirement of low-volume samples for the determination are remarkable characteristics that make it ideal for its potential application in clinical diagnosis in point-of-care settings., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T, PID2023-150844OB-I00, PID2022- 138908NB-C31, and PID2021-122299NB-I00), the Community of Madrid (REACT-UE NANOCOV-CM and Y2020/NMT6469), the Spanish Ministry of Science, Innovation and Universities (TED2021-129738B-I00, TED2021-130470B-I00, and TED2021- 129999B-C32) and the “María de Maeztu” Programme for Units of Excellence in R&D, CEX2023-001316-M. Laura Gutiérrez-Gálvez gratefully acknowledges the financial support of a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Estefanía Enebral-Romero received financial support from the “Nanotecnología para detección del SARS-CoV-2 y sus variantes, NANOCOV” project and a contract as a pre-doctoral researcher funded by a grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. We also acknowledge María U. González and Raquel Alvaro for their help with fluorescence microscopy and EDAX mapping, respectively, and the services of the MiNa Laboratory at IMN and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and the EU (FEDER, FSE). We also acknowledge the “Servicio de Microbiología, Hospital Universitario Ramón y Cajal and Instituto Ramón y Cajal de Investigación Sanitaria (IRYCIS)” for providing the clinical samples. We acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid by the Recovery, Transformation and Resilience Plan and by NextGenerationEU from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

MoS₂-DNA tetrahedral bioconjugate for high-performance DNA biosensors: application in viral infection diagnostics

  • Enebral-Romero, Estefanía
  • Martínez-Periñán, Emiliano
  • López-Diego, David
  • Luna, Mónica
  • Garrido, Marina
  • Navío, Cristina
  • Pérez, Emilio M.
  • Lorenzo, Encarnación
  • García-Mendiola, Tania
An electrochemical DNA biosensor is presented for early viral infection detection, integrating molybdenum disulphide (MoS₂), tetrahedral DNA nanostructures (TDNs), and thionine-modified carbon nanodots (CNDsTy). The innovation of this work lies in the first-time integration of these nanomaterials for the preparation of a bioconjugate, whose synergy enables the biosensor's functionality. MoS₂ anchors the TDNs, which carry the capture probe for virus identification via genetic code recognition. CNDsTy allow the electrochemical detection based on their different affinity for single-stranded (ssDNA) and double-stranded DNA (dsDNA), enabling hybridization event identification. The biosensor achieves high sensitivity (detection limit of 5.00 fM) and can distinguish viral loads, validated with the SARS-CoV-2 ORF1ab sequence in human nasopharyngeal samples., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The research leading to these results received funding from Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T, and PID2023-150844OB-I00), Community of Madrid (REACT-UE NANOCOV-CM, (MAD2D-CM)-IMDEA and S2018/NMT-4291 TEC2SPACE), Spanish Ministry of Science, Innovation and Universities (TED2021-129738B-I00, PID2020-116661RB-I00, and CEX2020-001039-S), the Recovery, Transformation and Resilience Plan, the European Union (NextGenerationEU and FEDER, FSE), and by MINECO (CSIC13-4E-1794)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

∼5-Fold enhancement in the thermoelectric figure of merit of sustainable 3D-CuNi interconnected nanonetworks due to ultralow lattice thermal conductivity

  • Manzano, Cristina V.
  • Caballero-Calero, Olga
  • Casari, Daniele
  • Sharma, Amit
  • Díaz-Lobo, Alba
  • Maeder, Xavier
  • Martín-González, Marisol
The pursuit of efficient thermoelectric materials, particularly those composed of low-toxicity and Earth-abundant elements, has intensified in recent years. This study introduces an approach to increase the thermoelectric properties of CuNi alloys through the synergistic application of two nanostructuring techniques: the incorporation of saccharine into the electrolyte to achieve a crystallite size reduction to 23-26 nm and the utilization of three-dimensional (3D) anodic aluminum oxide (3D-AAO) templates to fabricate nanowire networks. For comparison purposes, we successfully electrodeposited CuNi films, one-dimensional (1D) nanowire arrays, and modulated nanowire arrays, together with 3D-nanonetworks, maintaining a consistent composition of Cu0.60Ni0.40 across all samples. Notably, while the electrical conductivity and Seebeck coefficient remained consistent between the nanocrystalline CuNi films and the 3D-nanonetworks, a significant reduction in thermal conductivity was observed, decreasing from 29 W m-1 K-1 for the bulk material to 10.9 ± 1.1 W m-1 K-1 for nanocrystalline films, to 5.3 ± 0.5 W m-1 K-1 for the 3D nanonetworks, and to 4.9 ± 0.6 W m-1 K-1 for free-standing 3D CuNi nanonetworks. This reduction is attributed to enhanced phonon scattering within the 3D architecture together with the nanocrystalline size inside the nanowires. The figure of merit (zT) exhibited an impressive increase of more than four times (4.4) for 3D-CuNi nanonetworks within AAO templates and 4.8 times for free-standing 3D-CuNi nanonetworks, when compared to bulk. Our findings underscore the potential of dual nanostructuring strategies to optimize the thermoelectric performance of environmentally friendly, stable, and abundant materials like CuNi, paving the way for advancements in sustainable energy technologies., The authors would like to acknowledge financial support from MINECO under grant number PID2020-118430GB-100. C. V. M. acknowledges financial support from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract 2019-T1/IND-13541. We acknowledge the service from the MiNa Laboratory at IMN and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetoelastic anisotropy drives localized magnetization reversal in 3D nanowire networks

  • Vivas, Laura G.
  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Navas, David
  • Ordoñez-Cencerrado, Amanda A.
  • Manzano, Cristina V.
  • Sanz González, Ruy
  • Martín-González, Marisol
Three-dimensional magnetic nanowire networks (3DNNs) have shown promise for applications beyond those of their linear counterparts. However, understanding the underlying magnetization reversal mechanisms has been limited. In this study, we present a combined experimental and computational investigation on simplified 3DNNs to address this gap. Our findings reveal a previously unidentified in-plane magnetoelastic anisotropy, validated through comparisons between experimental and simulated magnetic data. Notably, we discovered that magnetization reversal in 3DNNs is driven by highly localized magnetic states, arising from the interplay of exchange and dipolar interactions, magnetoelastic anisotropy, and nanowire microstructure. This discovery challenges the prevailing understanding of magnetization reversal in nickel nanowires. Our work provides critical insights into the magnetic behavior of 3DNNs, opening doors for their tailored design and optimization., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Postdoctoral Fellowship (MIDAS) grant agreement no. 101107507. R. S. acknowledges financial support from grant PID2020-115325GB-C31 funded by MCIN/ AEI/10.13039/501100011033. D. N. acknowledges the financial support from the project CNS2022-135949 funded by the Spanish Ministry of Science and Innovation, MCIN/10.13039/ 501100011033, and by “ESF Investing in your future”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge Nadia Pastor Jimenez for technical support. We thank Xavier Maeder from EMPA for conducting transmission electron backscattered diffraction on Ni nanowires shown in the ESI, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Magnetoelastic anisotropy drives localized magnetization reversal in 3D nanowire networks. Nanoscale [Dataset]

  • Vivas, Laura G.
  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Navas, David
  • Ordoñez-Cencerrado, Amanda A.
  • Manzano, Cristina V.
  • Sanz, Ruy
  • Martín-González, Marisol
According to the open access nature and its exceptions in the datasets regulation of the Call HORIZON-MSCA-2022-PF-01, and having reflected the following statements in the Data Management Plan of such project (ID: 101107507; MIDAS; MSCA Postdoctoral Fellowship), the authors of the data associated with this publication state the following: The datasets associated with this publication will be available upon request, due to these datasets being subjected to Intellectual Property Restrictions; requests by externals for the use of these datasets will be approved by the principal investigators of the project Laura G. Vivas and Marisol Martin. Please, contact Dr. Laura G. Vivas and Prof. Martín-Gonzalez: laura.g.vivas@csic.es and marisol.martin@csic.es This modus operandi will remain in effect, at least until the end of the project., Three-dimensional magnetic nanowire networks (3DNNs) have shown promise for applications beyond those of their linear counterparts. However, understanding the underlying magnetization reversal mechanisms has been limited. This Dataset refers to the following study in which we present a combined experimental and computational investigation on simplified 3DNNs to address this gap. Our findings reveal a previously unidentified in-plane magnetoelastic anisotropy, validated through comparisons between experimental and simulated magnetic data. Notably, we discovered that magnetization reversal in 3DNNs is driven by highly localized magnetic states, arising from the interplay of exchange and dipolar interactions, magnetoelastic anisotropy, and nanowire microstructure. This discovery challenges the prevailing understanding of magnetization reversal in nickel nanowires. Our work provides critical insights into the magnetic behavior of 3DNNs, opening doors for their tailored design and optimization, This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Postdoctoral Fellowship (MIDAS) grant agreement no. 101107507. R. S. acknowledges financial support from grant PID2020-115325GB-C31 funded by MCIN/AEI/10.13039/501100011033. D. N. acknowledges the financial support from the project CNS2022-135949 funded by the Spanish Ministry of Science and Innovation, MCIN/10.13039/501100011033, and by “ESF Investing in your future”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge Nadia Pastor Jimenez for technical support. We thank Xavier Maeder from EMPA for conducting transmission electron backscattered diffraction on Ni nanowires shown in the ESI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring plasmonic hotspots of Au tilted nanocolumns and their application to the uracil detection by surface-enhanced Raman scattering

  • Barbillon, Grégory
  • Faure, Mathilde
  • Douillard, Ludovic
  • Caudron, Eric
  • Humbert, Christophe
  • García-Martín, José Miguel
In this work, an investigation on plasmonic hotspots of Au tilted nanocolumns and their application to the uracil detection by surface-enhanced Raman scattering (SERS) is addressed. These Au tilted nanocolumns are fabricated by employing a low-cost and easy-to-implement fabrication technique, which is the glancing angle deposition with magnetron sputtering. Moreover, these Au nanocolumns can generate a great density of highly confined electric field zones, called hotspots, located in the nanogaps between the nearest nanocolumns. The photoemission electron microscopy is employed to obtain the statistics on the distribution of these plasmonic hotspots with a high accuracy (spatial resolution of 10–20 nm) in the spectral range from 680 nm to 1080 nm. Thus, the SERS intensity can be correlated with the density and the intensity distribution of these plasmonic hotspots. Finally, the plasmonic hotspots of the Au nanocolumns are used to assess the limit of detection (LOD) of the uracil molecule by SERS. This LOD is determined at 6 nM demonstrating the good sensitivity of our Au nanocolumns compared to the existing literature., José Miguel García-Martín thanks grant PID2021-126524NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and also acknowledges the service from the MiNa Laboratory at IMN, funded from CM (project SpaceTec, S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Emission of fine and ultrafine nanoparticle aerosols from composites functionalized with Multi-Wall Carbon Nano Tubes (MWCNTs) subjected to sliding wear: the influence of matrix material

  • Husanu, Francisca
  • Vélez Molina, Juan Camilo
  • Carlos Cornelio, Jesús Antonio
  • Santa Marín, Juan Felipe
  • Toro, Alejandro
  • Castellote, Marta
  • Nevshupa, Roman
While multi-wall carbon nanotube (MWCNT)-reinforced nanocomposites offer improved wear resistance, the health implications of released nanoparticle aerosols are a concern. This research aimed to understand the influence of matrix material on the tribological properties, microstructure, and triboemission of MWCNT-functionalized polymer and cement composites. Key findings reveal that aerosol emission cannot be predicted solely based on porosity and mechanical properties. The observed variations in MWCNT effects across different matrix materials are attributed to the distinct dominant wear mechanisms in each., This work was supported by Spanish National Research Council (Nos. COOPB20363, COOPA20495, and COOPB24043), Ministry of Science, Innovation and Universities of Spain (Nos. PID2019-111063RB-I00 and TED2021-129950B-I00) and the National Council of Science and Technology of Mexico - CONACYT (No. 740521). The authors acknowledge the FESEM service from the MiNa Laboratory at IMN funded by Madrid’s Community Government (No. S2013/ICE2822), Ministry of Science, Innovation and Universities of Spain (No. CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advancing All-Day Passive Radiative Cooling Performance of 3D Anodized Aluminum Oxide Nanostructures on Aluminium

  • Díaz-Lobo, Alba
  • Martín-González, Marisol
  • Manzano, Cristina V.
Passive radiative cooling, which uses the cold sink of outer space for sub-ambient cooling, offers a sustainable alternative to energy-intensive conventional cooling methods. This study investigates the impact of transversal channel distances within three dimensional- 3D- anodic aluminum oxide (AAO) dielectric and inorganic nanostructures on their morphology, emissivity, and passive radiative cooling performance. 3D-AAO nanostructures with varying alumina thicknesses and transverse channel spacings are fabricated. 3D-AAO metamaterials on Aluminium - Al- bulk with larger transverse channel distances exhibit high solar reflectance and high mid-IR emissivity, since they act as Bragg reflectors. Their porosity is significantly higher than the more common 1D-AAO due to the periodically ordered transverse channels. Cooling power density calculations showed that greater transverse channel distances improve daytime cooling performance. Outdoor characterization under direct sunlight confirmed these findings, with a 3D-AAO nanostructure on Al bulk achieving a maximum temperature reduction of 10.2 °C. This research establishes the critical role of transverse nanochannels in tailoring the radiative cooling properties of durable, inorganic, all-dielectric 3D-AAO nanostructures and highlights their potential for multiple applications, including energy-efficient building cooling., The authors would like to acknowledge financial support from the “Atracción de Talento Investigador” de la Comunidad de Madrid, contract 2019-T1/IND-13541. The authors acknowledged the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822),MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). The authorsalso acknowledged support of the publication fee by the CSIC Open AccessPublication Support Initiative through its Unit of Information Resourcesfor Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mid-infrared optical valve based on VO2

  • García-Martín, Antonio
  • Álvaro Bruna, Raquel
  • Fang, Zhuoqun
  • Zimmers, Alexandre
  • Chen, Zhuoying
  • Aigouy, Lionel
We demonstrate an efficient optical binary-switch effect in nanoslit arrays achieved via the temperature-induced phase transition of VO2. Experimental measurements reveal a polarization-dependent 60% reduction in reflectivity during the insulator-to-metal transition. Tuning a single parameter of the slit enables control over the "optical-valve"effect. Full numerical simulations support these findings, predicting a reflectivity reduction up to 90%. The nearly one-to-null transition in reflectivity mimics the operation of a digital switch, with the high-reflectivity and the low-reflectivity states providing a binary response much like digital electronics., The authors are deeply indebted to Prof. G. Armelles, for sharing with us his latest efforts in research, performing the FTIR measurements, the ellipsometry analysis of VO2, and discussing the results. A.G.-M. acknowledges financial support from Grants No. BICPLAN6G (TED2021-131417B-I00) and No. LIGHTCOMPAS (PID2022-137569NB-C41), funded by Grant No. MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe.” A.G.-M. and R.A. acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (Project No. S2018/NMT-4291 TEC2SPACE), MINECO (Project No. CSIC13-4E-1794), and EU (FEDER, FSE). Z.F. acknowledges the Chinese Scholarship Council (CSC) for the Ph.D. thesis grant. All authors acknowledge Paris Sciences & Lettres (PSL) and ESPCI for the Invited Professor Grant attributed to A.G.-M., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Generalized Automated Framework for Thermal Characterization: From Bulk Materials to Complex Heterostructures

  • Tenaguillo Arrese, Miguel Ángel
  • Pérez Picazo, Elena
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Martín-González, Marisol
Precise determination of thermal conductivity in multilayer structures remains a critical challenge for advancing thermoelectric technologies. Conventional techniques often struggle with surface roughness or require complex preparation, hindering the characterization of electrodeposited materials. To address this gap, a fully automated, MATLAB-based computational framework operationalizing the generalized photoacoustic theory for a robust inverse analysis is presented. The methodology is rigorously benchmarked against Bi2Te3/3D anodic aluminum oxide (3D-AAO) reference nanocomposites, reproducing established literature values with high fidelity. Subsequently, the capability of this framework is demonstrated through the characterization of electrodeposited copper selenide (CuxSe) films. Results reveal a systematic dependence of thermal conductivity on copper stoichiometry, offering insights into anharmonicity-driven phonon scattering mechanisms. Comprehensive sensitivity analyses confirm that the photoacoustic signal is predominantly dominated by the film's thermal conductivity. Thus, this work delivers an accessible, validated tool for in situ characterization of structurally non-ideal films, accelerating next-generation energy material development., The authors acknowledge financial support from “ERC Advanced Grant No. 101052603, PowerbyU”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

A Generalized Automated Framework for Thermal Characterization: From Bulk Materials to Complex Heterostructures [Dataset]

  • Tenaguillo Arrese, Miguel Ángel
  • Pérez Picazo, Elena
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Martín-González, Marisol
Precise determination of thermal conductivity in multilayer structures remains a critical challenge for advancing thermoelectric technologies. Conventional techniques often struggle with surface roughness or require complex preparation, hindering the characterization of electrodeposited materials. To address this gap, a fully automated, MATLAB-based computational framework operationalizing the generalized photoacoustic theory for a robust inverse analysis is presented. The methodology is rigorously benchmarked against Bi2Te3/3D anodic aluminum oxide (3D-AAO) reference nanocomposites, reproducing established literature values with high fidelity. Subsequently, the capability of this framework is demonstrated through the characterization of electrodeposited copper selenide (CuxSe) films. Results reveal a systematic dependence of thermal conductivity on copper stoichiometry, offering insights into anharmonicity-driven phonon scattering mechanisms. Comprehensive sensitivity analyses confirm that the photoacoustic signal is predominantly dominated by the film's thermal conductivity. Thus, this work delivers an accessible, validated tool for in situ characterization of structurally non-ideal films, accelerating next-generation energy material development., The authors acknowledge financial support from “ERC Advanced Grant No. 101052603, PowerbyU”. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of twinning mechanisms of Mg–RE alloys using in situ synchrotron radiation diffraction and high-resolution digital image correlation

  • Garcés, Gerardo
  • Orozco-Caballero, A.
  • Medina, Judit
  • Pérez Zubiaur, Pablo
  • Stark, Andreas
  • Schell, Norbert
  • Adeva, Paloma
In situ synchrotron diffraction combined with high-resolution digital image correlation (HRDIC) were used to analyse the activation and spatial propagation of different twinning modes during compression deformation in an extruded Mg-6%Gd(wt%) alloy. Gadolinium atoms are in solid solution in the as-extruded state. Initially, the deformation process is controlled by the activation of tensile {101̅2}< 101̅1 > twinning (TTW). The volume fraction of TTWs evolves rapidly due to the twins transfer throughout neighbour grains and basal slip-assisted twin nucleation, as evidenced by HRDIC from the early development of localized deformation bands. TTW mode induces the rotation of the lattice with respect to the initial magnesium orientation and, therefore, a progressive increase in the intensity of the {0002} diffraction peak with increasing the strain in the axial direction, that reaches a maximum at around 6% of compression strain that also coincides with the maximum of the work-hardening curve. Above this strain, the compression (CTW) and double twinning (DTW) modes are also activated. This fact reduces the {0002} intensity along AD and increases the intensity of the {0002} diffraction peak in a direction between 15º to 45º from axial direction. The activation of non-basal dislocation-mediated slip modes within twins relaxes the localized stress concentration that DTWs generate. Therefore, gadolinium in solid solution enhances compressive plasticity in Mg alloys through the cooperative interaction between twinning and non-basal dislocation slip., This work was financially supported by the Spanish Ministry of Science, Innovation and Universities under project number TED2021–131235B-I00. The authors acknowledge the Deutsches Elektronen-Synchrotron (DESY) for providing beamtime at the P07 beamline of the PETRA III synchrotron facility. We would like to acknowledge support of the Electron Microscopy Laboratory at National Center for Metallurgical Research (CSIC) and National Center of Electron Microscopy (UCM) for access to their facilities and expert assistance. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT−4291 TEC2SPACE), MINECO (project CSIC13–4E−1794) and EU (FEDER, FSE).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improved photoenergy properties of low-emissivity coatings deposited by sputtering with an ion gun treatment

  • Carretero, E.
  • Cueva, A.
  • Preciado-Garbayo, J.
  • Sevillano, P.
This work studies the effect of ion treatment on low-emissivity (low-e) coatings deposited by magnetron sputtering. Specifically, we have investigated the application of an ion treatment in the dielectric layer before deposition of a layer of silver. This reduces layer roughness which means the silver layer can be deposited with enhanced characteristics. We have also evaluated the etching rate on the SnOx layer due to the ion treatment on already deposit coatings of equal thicknesses. Subsequently, we studied the effects on the coating's photoenergy properties. For equivalent coatings, we found that those treated with ions were more transparent in the visible region, more reflective, and had a lower emissivity, which are essential requirements for low-e coatings applied in architectural glass.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Study of the optimal deposition conditions of Ag(O2) and Ag(N2) seed layers on ultrathin silver transparent conductive films

  • Cueva, Ana
  • Carretero, Enrique
In this study, ultrathin Ag layers were analyzed for their use as conductive films, which were fabricated via magnetron sputtering on a glass substrate and protected with aluminum-doped zinc oxide (AZO). These layers were obtained using seed layers made of silver deposited by adding small amounts of oxygen or nitrogen prior to the deposition of the metallic silver layer. This study aimed to determine the optimal amount of gas needed to maximize the conductivity and transparency properties of the conductive films with varied silver thicknesses. The optimal characteristics of the studied samples were verified using spectrophotometric, sheet resistance measurements, and surface morphology techniques. It was concluded that a smaller amount of silver required a higher amount of gas to be introduced into the seed layer. Besides, to fabricate an optimal conductive film, it is necessary to deposit 5.9 or 5.2 nm of silver with a seed layer obtained with a O2 partial pressure of 1.7 × 10−4 mbar, or 5.2 or 4.7 nm of silver with a seed layer obtained using a N2 partial pressure of 4.2 × 10−4 mbar. These samples provide sheet resistance values between 13.0 Ω/sq and 17.6 Ω/sq and transmission between 86.2 % and 87.3 % at 550 nm.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

GaAs nanoscale membranes, prospects for seamless integration of III-Vs on silicon

  • Raya, Andrés M.|||0000-0002-6619-8967
  • Friedl, Martin
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Alén, Benito
  • Morgan, Nicholas
  • Tütüncüoglu, Gözde
  • Ramasse, Quentin|||0000-0001-7466-2283
  • Fuster Signes, David
  • Llorens, José M.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
The growth of compound semiconductors on silicon has been widely sought after for decades, but reliable methods for defect-free combination of these materials have remained elusive. Recently, interconnected GaAs nanoscale membranes have been used as templates for the scalable integration of nanowire networks on III-V substrates. Here, we demonstrate how GaAs nanoscale membranes can be seamlessly integrated on silicon by controlling the density of nuclei in the initial stages of growth. We also correlate the absence or presence of defects with the existence of a single or multiple nucleation regime for the single membranes. Certain defects exhibit well-differentiated spectroscopic features that we identify with cathodoluminescence and micro-photoluminescence techniques. Overall, this work presents a new approach for the seamless integration of compound semiconductors on silicon.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

3D BiTe Interconnected Nanowire Networks to Increase Thermoelectric Efficiency

  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Manzano, Cristina V.|||0000-0001-5708-6544
  • Maeder, Xavier
  • Beardo, Albert|||0000-0003-1889-1588
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Martín-González, Marisol|||0000-0002-5687-3674
3D interconnected nanowire scaffoldings are shown to increase the thermoelectric efficiency in comparison to similar diameter 1D nanowires and films grown under similar electrodeposition conditions. BiTe 3D nanonetworks offer a reduction in thermal conductivity (κ) while preserving the high electrical conductivity of the films. The reduction in κ is modeled using the hydrodynamic heat transport equation, and it can be understood as a heat viscosity effect due to the 3D nanostructuration. In addition, the Seebeck coefficient is twice that of nanowires and films, and up to 50% higher than in a single crystal. This increase is interpreted as a nonequilibrium effect that the geometry of the structure induces on the distribution function of the phonons, producing an enhanced phonon drag. These thermoelectric metamaterials have higher performance and are fabricated with large areas by a cost-effective method, which makes them suitable for up-scale production.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

From Binary to Ternary Transition-Metal Nitrides, A Boost toward Nitrogen Magneto-Ionics

  • Tan, Zhengwei|||0000-0003-4142-0637
  • Martins, Sofia|||0000-0002-1801-1651
  • Escobar, Michael|||0000-0002-5813-3370
  • de Rojas, Julius|||0000-0002-1206-4744
  • Ibrahim, Fatima
  • Chshiev, Mairbek|||0000-0001-9232-7622
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics is an emerging actuation mechanism to control the magnetic properties of materials via voltage-driven ion motion. This effect largely relies on the strength and penetration of the induced electric field into the target material, the amount of generated ion transport pathways, and the ionic mobility inside the magnetic media. Optimizing all these factors in a simple way is a huge challenge, although highly desirable for technological applications. Here, we demonstrate that the introduction of suitable transition-metal elements to binary nitride compounds can drastically boost magneto-ionics. More specifically, we show that the attained magneto-ionic effects in CoN films (i.e., saturation magnetization, toggling speeds, and cyclability) can be drastically enhanced through 10% substitution of Co by Mn in the thin-film composition. Incorporation of Mn leads to transformation from nanocrystalline into amorphous-like structures, as well as from metallic to semiconducting behaviors, resulting in an increase of N-ion transport channels. Ab initio calculations reveal a lower energy barrier for CoMn-N compared to Co-N that provides a fundamental understanding of the crucial role of Mn addition in the voltage-driven magnetic effects. These results constitute an important step forward toward enhanced voltage control of magnetism via electric field-driven ion motion.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Frequency-dependent stimulated and post-stimulated voltage control of magnetism in transition metal nitrides, towards brain-inspired magneto-ionics

  • Tan, Zhengwei|||0000-0003-4142-0637
  • de Rojas, Julius|||0000-0002-1206-4744
  • Martins, Sofia|||0000-0002-1801-1651
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Quintana, Alberto|||0000-0002-9813-735X
  • Cialone, Matteo|||0000-0002-3018-2787
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Meersschaut, Johan|||0000-0003-2467-1784
  • Vantomme, André|||0000-0001-9158-6534
  • Costa-Krämer, José L.|||0000-0002-7664-2195
  • Sort, Jordi|||0000-0003-1213-3639
  • Menéndez, Enric|||0000-0003-3809-2863
Magneto-ionics, which deals with the change of magnetic properties through voltage-driven ion migration, is expected to be one of the emerging technologies to develop energy-efficient spintronics. While a precise modulation of magnetism is achieved when voltage is applied, much more uncontrolled is the spontaneous evolution of magneto-ionic systems upon removing the electric stimuli (i.e., post-stimulated behavior). Here, we demonstrate a voltage-controllable N ion accumulation effect at the outer surface of CoN films adjacent to a liquid electrolyte, which allows for the control of magneto-ionic properties both during and after voltage pulse actuation (i.e., stimulated and post-stimulated behavior, respectively). This effect, which takes place when the CoN film thickness is below 50 nm and the voltage pulse frequency is at least 100 Hz, is based on the trade-off between generation (voltage ON) and partial depletion (voltage OFF) of ferromagnetism in CoN by magneto-ionics. This novel effect may open opportunities for new neuromorphic computing functions, such as post-stimulated neural learning under deep sleep.