Skip to main content

Plataforma (Oncodeeplasm) para inmunoensayos optoplasmónicos ultrasensibles para la detección temprana del cáncer de mama basada en biomarcadores de proteínas en la región profunda del proteoma sanguíneo

PLEC2021-007892

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i en Líneas Estratégicas
Call year 2021
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Square Membrane Resonators Supporting Degenerate Modes of Vibration for High-Throughput Mass Spectrometry of Single Bacterial Cells

  • Sanz-Jiménez, Adrián
  • Ruz Martínez, José Jaime
  • Gil-Santos, Eduardo
  • Malvar, Óscar
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Cano-Tortajada, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
In nanomechanical mass spectrometry, sensing devices are commonly placed in the vacuum environment and a stream of analytes is directed toward the sensor surface for measurement. Beam structures, such as double-clamped nanobeams and nanocantilevers, are commonly used due to their low inertial mass and the simplicity of the analytical models for mass extraction. The drawback of such structures is their low capture areas, compromising the capture efficiency and throughput of this technique. Bi-axisymmetric resonators, such as ultrathin square or circular membranes, arise as an optimal geometry to maximize capture efficiency while minimizing the device inertial mass. However, these structures present degenerate mechanical modes, whose frequency perturbations upon analyte adsorption are not well described by commonly used models. Furthermore, prior knowledge of the vibration mode shapes of the sensor is crucial for the correct calculation of the analyte’s mass, and the mode shape of degenerate modes may change significantly after every adsorption event. In this work, we present an accurate analytical theory to describe the effect of mass adsorption on the degenerate modes of square membrane resonators and propose two different methods based on the new theory to update the vibration mode shapes after every adsorption event. Finally, we illustrate the problem experimentally obtaining the mass and adsorption position of individual Escherichia coli K-12 bacterial cells on commercial square silicon nitride membranes fabricated with very small tolerances., This work was partially supported by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 731868 VIRUSCAN, by the ERC CoG grant 681275 “LIQUIDMASS”, and by 101034583-H2020-FETOPEN “VIRAIR”. It has received funding from the Spanish Science and Innovation Ministry through projects AES (DTS21/00136/ISCIII/Unión Europea/FEDER), “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/ 10.13039/501100011033/FEDER, UE), “ONCOLIGHT” (PDC2022-133503-I00/MCIN/AEI/10.13039/ 501100011033/European Union/Next Generation EU/ PRTR), “ONCODEEPLASM” (PLEC2021-007892/MCIN/ AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid Y2020/BIO-65194 scCANCER-CM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanomechanical Sensing for Mass Flow Control in Nanowire-Based Open Nanofluidic Systems

  • Escobar, Javier Enrique
  • Molina Fernández, Juan
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Open nanofluidic systems, where liquids flow along the outer surface of nanoscale structures, provide otherwise unfeasible capabilities for extremely miniaturized liquid handling applications. A critical step toward fully functional applications is to obtain quantitative mass flow control. We demonstrate the application of nanomechanical sensing for this purpose by integrating voltage-driven liquid flow along nanowire open channels with mass detection based on flexural resonators. This approach is validated by assembling the nanowires with microcantilever resonators, enabling high-precision control of larger flows, and by using the nanowires as resonators themselves, allowing extremely small liquid volume handling. Both implementations are demonstrated by characterizing voltage-driven flow of ionic liquids along the surface of the nanowires. We find a voltage range where mass flow rate follows a nonlinear monotonic increase, establishing a steady flow regime for which we show mass flow control at rates from below 1 ag/s to above 100 fg/s and precise liquid handling down to the zeptoliter scale. The observed behavior of mass flow rate is consistent with a voltage-induced transition from static wetting to dynamic spreading as the mechanism underlying liquid transport along the nanowires., This work was supported by European Research Council through ERC CoG Grant 681275; project PID2021- 128395OB-I00 funded by MCIN/AEI/10.13039/ 501100011033/FEDER, UE; Projects PDC2022-133944-I00 and PLEC2021-007892 funded by MCIN/AEI/10.13039/ 501100011033 and European Union “NextGenerationEU”/ PRTR; Project Y2020/BIO-65194 funded by Comunidad de Madrid; Grant RYC-2019-026626-I funded by MCIN; Project AES (DTS21/00136) funded by ISCIII/Unión Europea/ FEDER. We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2- SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simultaneous Optical and Mechanical Sensing Based on Optomechanical Resonators

  • Sentre Arribas, Elena
  • Aparicio-Millán, Alicia
  • Lemaître, Aristide
  • Favero, Ivan
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
  • Gil-Santos, Eduardo
Optical and mechanical resonators have each been abundantly employed in sensing applications, albeit following separate development. Here we show that bringing together optical and mechanical resonances in a unique sensing device significantly improves the sensor performance. To that purpose, we employ nanoscale optomechanical disk resonators that simultaneously support high quality optical and mechanical modes localized in tiny volumes, which provide extraordinary sensitivities. We perform environmental sensing, but the conclusions of our work extend to other sensing applications. First, we determine optical and mechanical responsivities to temperature and relative humidity changes. Second, by characterizing mechanical and optical frequency stabilities, we determine the corresponding limits of detection. Mechanical modes appear more sensitive to relative humidity changes, while optical modes appear more sensitive to temperature ones, reaching, respectively, 0.05% and 0.6 mK of independent resolution. We then prove that simultaneous optical and mechanical monitoring enables disentangling both effects and demonstrates 0.1% and 1 mK resolution, even considering that both parameters may change at the same time. Finally, we highlight the importance of actively tracking the optical mode when optomechanical sensor devices. Not doing so enforces tedious independent calibration, influences the device sensitivity during the experiment, and shortens the sensing range. The present work hence clarifies the requirements for the optimal operation of optomechanical sensors, which will be of importance for chemical and biological sensing., This work was partially supported by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 731868-VIRUSCAN, by the “Fundación BBVA” under the program “Beca Leonardo a Investigadores y Creadores Culturales 2021” through the project DISOM, and by the “Fundación Ramón Areces” under the project OPTOCAP. E.G.-S. acknowledges the financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I. J.T. and M.C acknowledge the financial support by Spanish Science and Innovation Ministry through the projects “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE) and “ONCODEEPLASM” (PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR); and by “Comunidad Autónoma de Madrid” through the project Y2020/BIO- 65194 scCANCER-CM.I.F. I.F. acknowledges financial support from ERC NOMLI project (no 770933)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rapid mechanical phenotyping of breast cancer cells based on stochastic intracellular fluctuations

  • Cano-Tortajada, Álvaro
  • Yubero, Marina L.
  • Millá, Carmen
  • Puerto Belda, Verónica
  • Ruz Martínez, José Jaime
  • Kosaka, Priscila M.
  • Calleja, Montserrat
  • Malumbres, Marcos
  • Tamayo de Miguel, Francisco Javier
Predicting the phenotypic impact of genetic variants and treatments is crucial in cancer genetics and precision oncology. Here, we have developed a noise decorrelation method that enables quantitative phase imaging (QPI) with the capability for label-free noninvasive mapping of intracellular dry mass fluctuations within the millisecond-to-second timescale regime, previously inaccessible due to temporal phase noise. Applied to breast cancer cells, this method revealed regions driven by thermal forces and regions of intense activity fueled by ATP hydrolysis. Intriguingly, as malignancy increases, the cells strategically expand these active regions to satisfy increasing energy demands. We propose parameters encapsulating key information about the spatiotemporal distribution of intracellular fluctuations, enabling precise phenotyping. This technique addresses the need for accurate, rapid functional screening methods in cancer medicine., This work was partially supported by the Spanish Science and Innovation Ministry through projects RTI2018-099369-B-I00 (related doctoral fellowship [FPI] PRE2019-087448), AES (DTS21/00136)/ISCIII/EU/FEDER, “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE), “ONCOLIGHT” (PDC2022-133503- I00/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR), and “ONCODEEPLASM” (PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid (Y2020/BIO- 65194 scCANCER-CM). This work has also been supported by private FERO Foundation and Elena Torres Cancer Association funding. We acknowledge the service from the Micro and Nanofabrication Laboratory and X-SEM laboratory at IMN-CNM funded by the Comunidad Autónoma de Madrid (project S2018/NMT-4291 TEC2SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multiparametric quantification of bacterial cells using digital holographic microscopy

  • Cano-Tortajada, Álvaro
  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
The detection and quantification of the physical properties of bacterial cells are crucial for advancing precision microbiology. Here, we use digital holographic microscopy (DHM) to measure the dry mass of individual Staphylococcus epidermidis (S. epidermidis) and Escherichia coli (E. coli) cells with high throughput and rapid acquisition. We demonstrate that by processing quantitative phase images with polynomial background correction, Gaussian filtering, and adaptive masking, we are able to obtain, not only the dry mass of individual bacterial cells, but also detailed morphological information. These features allow the discrimination between single and clustered cocci, as well as the identification of elongation patterns in bacilli, that may provide relevant indicators of bacterial growth and physiological state. Finally, we compare the DHM dry mass distribution with those obtained by nanomechanical mass spectrometry (NMS), highlighting the potential and limitations of each technique., This work was supported by the European Union through HORIZON-EIC-2022-PATHFINDEROPEN Project VIRUSONG 101099058, by the Spanish MCIN through projects “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE), “ONCODEEPLASM” (PLEC2021–007892/MCIN/AEI/10.13039/501100011033/European Union/ Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid (S2022/BMD-7437, i-LUNG 20). This work has also been supported by FERO Fundación Elena Torres Cancer Association funding. We acknowledge the service from MiNa Laboratory at IMN, and founding from EU (FEDER, FSE), MCIN/AEI/10.13039/50110001.1033 and Next Generation EU/PRTR (EQC2021-006944-P)., Peer reviewed