Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of surface stress induced curvature on the eigenfrequencies of microcantilever plates

  • Ruz Martínez, José Jaime
  • Pini, Valerio
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Ultrasensitive physical, chemical and biological sensors have emerged in the last decade based on the measurement of the eigenfrequencies of micro- and nanosized cantilever plates. Surface stress is omnipresent in these devices due to a variety of factors such as the fabrication process, temperature variations and analyte adsorption. How surface stress influences on the eigenfrequencies of cantilever plates has remained as an unsolved question in physics that has raised a long debate since first experiments in 1975. Recent theoretical models have shed light on the role of the net surface stress. Still, there exists a discrepancy between theory and some experimental reports, affecting to the capability for quantification of these sensors. In this Letter, we present a theoretical framework that demonstrates that the cantilever bending due to differential surface stress between opposite faces of the cantilever, a neglected effect in classical beam theory, plays a relevant role in the stiffness and eigenfrequencies of cantilevers. We develop a new theoretical framework that provides analytical equations that accurately describe the effect of surface stress on the first three vibration modes of cantilevers. Our findings provide the final piece of the puzzle for solving this long-standing problem in physics, This study has been supported by European Union’ s Horizon 2020 research and innovation programme under grant agreement No 731868 – VIRUSCAN and European Research Council grant 681275 – LIQUIDMASS- ERC- CoG-2015; by Spanish Ministry of Economy and Competitiveness (grant MAT2015-66904-R). PMK acknowledges financial support by Fundación General CSIC (ComFuturo Program), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanomechanical plasmon spectroscopy of single gold nanoparticles

  • Ramos Vega, Daniel
  • Malvar, Óscar
  • Davis, Zachary James
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
We experimentally demonstrate the effect of the localized surface plasmon resonance (LSPR) of a single gold nanoparticle (AuNP) of 100 nm in diameter on the mechanical resonance frequency of a free-standing silicon nitride membrane by means of optomechanical transduction. We discover that a key effect to explain the coupling in these systems is the extinction cross section enhancement due to the excitation of the LSPR at selected wavelengths. In order to validate this coupling, we have developed a fixed wavelength interferometric readout system with an integrated tunable laser source, which allows us to perform the first experimental demonstration of nanomechanical spectroscopy of deposited AuNPs onto the membrane, discerning in between single particles and dimers by the mechanical frequency shift. We have also introduced three-axis mechanical scanners with nanometer-scale resolution in our experimental setup to selectively study single nanoparticles or small clusters. Whereas the single particles are polarization-insensitive, the gold dimers have a clearly defined polarization angle dependency as expected by theory. Finally, we found an unexpected long-distance (∼200 nm) coupling of the LSPR of separated AuNPs coming out from the guided light by the silicon nitride membrane., This work was supported by the Spanish Science Ministry (MINECO) through project TEC2017-89765-R and by the European Union’s Horizon 2020 research and innovation program under Grant Agreement 31868−VIRUSCAN and European Research Council Grant 681275 − LIQUIDMASSERC- CoG-2015. D.R. acknowledges the RyC fellowship supported by MINECO. All authors acknowledge the service from the X-SEM Laboratory at IMN and funding from MINECO under project CSIC13-4E-1794 with support from EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of a methodology for reversible chemical modification of silicon surfaces with application in nanomechanical biosensors

  • Sato, Roseli H.
  • Kosaka, Priscila M.
  • Omori, Álvaro T.
  • Ferreira, Edgard A.
  • Petri, Denise F. S.
  • Malvar, Óscar
  • Domínguez, Carmen M.
  • Pini, Valerio
  • Ahumada, O.
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
  • Cunha, Rodrigo L. O. R.
  • Fiorito, Pablo A.
Hypervalent tellurium compounds have a particular reactivity towards thiol compounds which are related to their biological properties. In this work, this property was assembled to tellurium-functionalized surfaces. These compounds were used as linkers in the immobilization process of thiolated biomolecules (such as DNA) on microcantilever surfaces. The telluride derivatives acted as reversible binding agents due to their redox properties, providing the regeneration of microcantilever surfaces and allowing their reuse for further biomolecules immobilizations, recycling the functional surface. Initially, we started from the synthesis of 4-((3-((4-methoxyphenyl) tellanyl) phenyl) amino)-4-oxobutanoic acid, a new compound, which was immobilized on a silicon surface. In nanomechanical systems, the detection involved a hybridization study of thiolated DNA sequences. Fluorescence microscopy technique was used to confirm the immobilization and removal of the telluride-DNA system and provided revealing results about the potentiality of applying redox properties to chalcogen derivatives at surfaces., We acknowledge the financial support from the CAPES for granting a postgraduate scholarship, the Multiuser Central Facilities (CEM-UFABC) and the Universidade Federal do ABC, Santo André, Brazil. This work was supported by the Spanish Science Ministry (MINECO) through project TEC2017-89765-R and by the European Union's Horizon 2020 research and innovation program under grant agreement No 731868–VIRUSCAN and European Research Council grant 681275 – LIQUIDMASS- ERC- CoG-2015. P M Kosaka acknowledges funding from the Fundación General CSIC ComFuturo Program. We thank Prof. Dr. Erick Leite Bastos from the Universidade de São Paulo, Brazil, for financially supporting the organics analysis (NMR and MS) and Prof. Dr. Willian Reis de Araujo from Unicamp, Brazil, Dr. Letícia Christina Pires Gonçalves and Dr. Nathana Barbosa Lopes for their help in the analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Real-Time Particle Spectrometry in Liquid Environment Using Microfluidic-Nanomechanical Resonators

  • Martín-Pérez, Alberto
  • Ramos Vega, Daniel
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
Trabajo presentado en la 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII), celebrada en Berlín (Alemania), del 23 al 27 de junio de 2019, Hollow nanomechanical resonators represent a promising technique for particle spectrometry, as their design allows highly sensitive particle mass sensing in liquid environments by putting together the good mechanical behavior of a nanomechanical resonator vibrating in vacuum or gas environment with physiological compatibility of liquid environments for biological applications. Nevertheless, for real-world practical applications these sensors require not only a high mass sensitivity but also a high-throughput particle flow. In this work, we use a fast-response and low-cost hollow nanomechanical resonator which let us measure up to 10 particles per second. However, this unprecedented particle velocities brings new implications related to the entanglement between the mechanics and the microfluidics in this structure. We realized that the measured particle masses depend on the fluid velocity. The study of this phenomenon demonstrates the need to introduce a correction factor in mass sensing dependent on particle velocity., This work was supported by the European Union's Horizon 2020 program under European Research Council grant 681275 – LIQUIDMASS- ERC- CoG-2015 and by the Comunidad de Madrid (iLUNG B2017/BMD-3884) - co-funded by FSE & FEDER and the Spanish Science Ministry(MINECO) through project TEC2017-89765-R. All authors acknowledge the service from the X-SEM Laboratory at IMN and MINECO under project CSIC13- 4E-1794, also with support from EU (FEDER, FSE). All the authors also acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13- 4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechano-Optical Analysis of Single Cells with Transparent Microcapillary Resonators

  • Martín-Pérez, Alberto
  • Ramos Vega, Daniel
  • Gil-Santos, Eduardo
  • García-López, Sergio
  • Yubero, Marina L.
  • Kosaka, Priscila M.
  • San Paulo, Álvaro
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
The study of biophysical properties of single cells is becoming increasingly relevant in cell biology and pathology. The measurement and tracking of magnitudes such as cell stiffness, morphology, and mass or refractive index have brought otherwise inaccessible knowledge about cell physiology, as well as innovative methods for high-throughput labelfree cell classification. In this work, we present hollow resonator devices based on suspended glass microcapillaries for the simultaneous measurement of single-cell buoyant mass and reflectivity with a throughput of 300 cells/minute. In the experimental methodology presented here, both magnitudes are extracted from the devices’ response to a single probe, a focused laser beam that enables simultaneous readout of changes in resonance frequency and reflected optical power of the devices as cells flow within them. Through its application to MCF-7 human breast adenocarcinoma cells and MCF-10A nontumorigenic cells, we demonstrate that this mechano-optical technique can successfully discriminate pathological from healthy cells of the same tissue type., This work was supported by the European Union’s Horizon 2020 research and innovation program under European Research Council Grant 681275-LIQUIDMASS-ERC-CoG2015 and by the Spanish Science, Innovation and Universities Ministry through project CELLTANGLE reference RTI2018- 099369-B-I00, project MOMPs reference TEC2017-89765-R and Ramon y Cajal grant RYC-2017-21640 to P.M.K.; by the ́ Comunidad de Madrid (iLUNG B2017/BMD-3884) with support from EU (FEDER, FSE). E.G.-S. received funding from Fundacion General CSIC (Programa ComFuturo), as ́ well as Marie-Sklodowska Curie Actions (H2020-MSCA-IF2015) under NOMBIS project (703354).The service from the Micro and Nanofabrication Laboratory (MiNa) and X-SEM Laboratory, is funded by MCIU (CSIC13-4E-1794) and EU (FEDER, FSE). We have received support for part of the publication fee by CSIC open access publication support initiative through URICI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Imaging low-dimensional nanostructures by very low voltage scanning electron microscopy: ultra-shallow topography and depth-tunable material contrast

  • Zarraoa, Laura
  • González Sagardoy, María Ujué
  • San Paulo, Álvaro
We demonstrate the implications of very low voltage operation (<1 kV) of a scanning electron microscope for imaging low-dimensional nanostructures where standard voltages (2–5 kV) involve a beam penetration depth comparable to the cross-section of the nanostructures. In this common situation, image sharpness, contrast quality and resolution are severely limited by emission of secondary electrons far from the primary beam incidence point. Oppositely, very low voltage operation allows reducing the beam-specimen interaction to an extremely narrow and shallow region around the incidence point, enabling high-resolution and ultra-shallow topographic contrast imaging by high-angle backscattered electrons detection on the one hand, and depth-tunable material contrast imaging by low-angle backscattered electrons detection on the other. We describe the performance of these imaging approaches on silicon nanowires obtained by the vapor-liquid-solid mechanism. Our experimental results, supported by Monte Carlo simulations of backscattered electrons emission from the nanowires, reveal the self-assembly of gold-silica core-shell nanostructures at the nanowire tips without any ad-hoc thermal oxidation step. This result demonstrates the capacity of very low voltage operation to provide optimum sharpness, contrast and resolution in low-dimensional nanostructures and to gather information about nanoscaled core-shell conformations otherwise impossible to obtain by standard scanning electron microscopy alone., This work has been supported by European Research Council grant 681275 (LIQUIDMASS-ERC-CoG-2015). We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coherent optical transduction of suspended microcapillary resonators for multi-parameter sensing applications

  • Martín-Pérez, Alberto
  • Ramos Vega, Daniel
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
Characterization of micro and nanoparticle mass has become increasingly relevant in a wide range of fields, from materials science to drug development. The real-time analysis of complex mixtures in liquids demands very high mass sensitivity and high throughput. One of the most promising approaches for real-time measurements in liquid, with an excellent mass sensitivity, is the use of suspended microchannel resonators, where a carrier liquid containing the analytes flows through a nanomechanical resonator while tracking its resonance frequency shift. To this end, an extremely sensitive mechanical displacement technique is necessary. Here, we have developed an optomechanical transduction technique to enhance the mechanical displacement sensitivity of optically transparent hollow nanomechanical resonators. The capillaries have been fabricated by using a thermal stretching technique, which allows to accurately control the final dimensions of the device. We have experimentally demonstrated the light coupling into the fused silica capillary walls and how the evanescent light coming out from the silica interferes with the surrounding electromagnetic field distribution, a standing wave sustained by the incident laser and the reflected power from the substrate, modulating the reflectivity. The enhancement of the displacement sensitivity due to this interferometric modulation (two orders of magnitude better than compared with previous accomplishments) has been theoretically predicted and experimentally demonstrated., This work was supported by the European Union’s Horizon 2020 program under European Research Council grant 681275—LIQUIDMASS-ERC-CoG-2015 and by the Comunidad de Madrid (iLUNG B2017/BMD-3884)—co-funded by FSE & FEDER and the Spanish Science Ministry (MINECO) through project MOMPs TEC2017-89765-R. All authors acknowledge the service from the X-SEM Laboratory at IMN and MINECO under project CSIC13-4E-1794, also with support from EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical Transduction for Vertical Nanowire Resonators

  • Molina Fernández, Juan
  • Ramos Vega, Daniel
  • Gil-Santos, Eduardo
  • Escobar, Javier Enrique
  • Ruz Martínez, José Jaime
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
We describe an optical transduction mechanism to measure the flexural mode vibrations of vertically aligned nanowires on a flat substrate with high sensitivity, linearity, and ease of implementation. We demonstrate that the light reflected from the substrate when a laser beam strikes it parallel to the nanowires is modulated proportionally to their vibration, so that measuring such modulation provides a highly efficient resonance readout. This mechanism is applicable to single nanowires or arrays without specific requirements regarding their geometry or array pattern, and no fabrication process besides the nanowire generation is required. We show how to optimize the performance of this mechanism by characterizing the split flexural modes of vertical silicon nanowires in their full dynamic range and up to the fifth mode order. The presented transduction approach is relevant for any application of nanowire resonators, particularly for integrating nanomechanical sensing in functional substrates based on vertical nanowires for biological applications., This work was supported by the ERC CoG Grant 681275 “LIQUIDMASS” and by the Spanish Science, Innovation and Universities Ministry through project “EXOFLUX” (ref: PGC2018-101762-B-I00). We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT4291 TEC2SPACE) and by MINECO (Project CSIC13-4E1794 with support from FEDER, FSE). E.G.S. acknowledges financial support by Fundacion General CSIC (Programa ́ ComFuturo), as well as Marie-Sklodowska Curie Actions (H2020-MSCA-IF-2015) under NOMBIS project (703354). We acknowledge partial open access support by CSIC through URICI initiative., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optomechanical detection of vibration modes of a single bacterium

  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Favero, Iván
  • Lemaître, Aristide
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Low-frequency vibration modes of biological particles, such as proteins, viruses and bacteria, involve coherent collective vibrations at frequencies in the terahertz and gigahertz domains. These vibration modes carry information on their structure and mechanical properties, which are good indicators of their biological state. In this work, we harnessed a particular regime in the physics of coupled mechanical resonators to directly measure these low-frequency mechanical resonances of a single bacterium. We deposit the bacterium on the surface of an ultrahigh frequency optomechanical disk resonator in ambient conditions. The vibration modes of the disk and bacterium hybridize when their associated frequencies are similar. We developed a general theoretical framework to describe this coupling, which allows us to retrieve the eigenfrequencies and mechanical loss of the bacterium low-frequency vibration modes (quality factor). Additionally, we analysed the effect of hydration on these vibrational modes. This work demonstrates that ultrahigh frequency optomechanical resonators can be used for vibrational spectrometry with the unique capability to obtain information on single biological entities., his work was supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 731868 – VIRUSCAN and European Research Council grants 681275 – LIQUIDMASS- ERC- CoG-2015 and 770933-NOMLI-ERC-CoG 2017, by the Spanish Science, Innovation and Universities Ministry through project CELLTANGLE reference RTI2018-099369-B-I00 and Ramón y Cajal grant RYC-2017-21640 to P.M.K. and by the Comunidad de Madrid (iLUNG B2017/BMD-3884) with support from the EU (FEDER, FSE). We acknowledge J. Mingorance for guidance and for providing the bacterial samples. All the authors acknowledge service from the IMN X-SEM Laboratory, which is funded by MCIU (project CSIC13-4E-1794) and the EU (FEDER, FSE). E.G.S. acknowledges financial support by the Fundación General CSIC (Programa ComFuturo), as well as Marie-Sklodowska Curie Actions (H2020-MSCA-IF-2015) under the NOMBIS project (703354).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effects of energy metabolism on the mechanical properties of breast cancer cells

  • Yubero, Marina L.
  • Kosaka, Priscila M.
  • San Paulo, Álvaro
  • Malumbres, Marcos
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Tumorigenesis induces actin cortex remodeling, which makes cancerous cells softer. Cell deformability is largely determined by myosin-driven cortical tension and actin fiber architecture at the cell cortex. However, it is still unclear what the weight of each contribution is, and how these contributions change during cancer development. Moreover, little attention has been paid to the effect of energy metabolism on this phenomenon and its reprogramming in cancer. Here, we perform precise two-dimensional mechanical phenotyping based on power-law rheology to unveil the contributions of myosin II, actin fiber architecture and energy metabolism to the deformability of healthy (MCF-10A), noninvasive cancerous (MCF-7), and metastatic (MDA-MB-231) human breast epithelial cells. Contrary to the perception that the actin cortex is a passive structure that provides mechanical resistance to the cell, we find that this is only true when the actin cortex is activated by metabolic processes. The results show marked differences in the nature of the active processes that build up cell stiffness, namely that healthy cells use ATP-driven actin polymerization whereas metastatic cells use myosin II activity. Noninvasive cancerous cells exhibit an anomalous behavior, as their stiffness is not as affected by the lack of nutrients and ATP, suggesting that energy metabolism reprogramming is used to sustain active processes at the actin cortex., This work was supported by the European Union’s Horizon 2020 research and innovation program under European Research Council Grant 681275-LIQUIDMASS-ERCCoG-2015, under Grant Agreement No. 731868 – VIRUSCAN and by the Spanish Science, Innovation and Universities Ministry through project CELLTANGLE reference RTI2018-099369-B-I00; by the Comunidad de Madrid (iLUNG B2017/BMD-3884) with support from EU (FEDER, FSE) and Ramón y Cajal grant RYC-2017-21640 to P.M.K. The service from the X-SEM Laboratory is funded by MCIU (CSIC13-4E-1794) and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrodynamic assisted multiparametric particle spectrometry

  • Martín-Pérez, Alberto
  • Ramos Vega, Daniel
  • Yubero, Marina L.
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
The real-time analysis of single analytes in flow is becoming increasingly relevant in cell biology. In this work, we theoretically predict and experimentally demonstrate hydrodynamic focusing with hollow nanomechanical resonators by using an interferometric system which allows the optical probing of flowing particles and tracking of the fundamental mechanical mode of the resonator. We have characterized the hydrodynamic forces acting on the particles, which will determine their velocity depending on their diameter. By using the parameters simultaneously acquired: frequency shift, velocity and reflectivity, we can unambiguously classify flowing particles in real-time, allowing the measurement of the mass density: 1.35 ± 0.07 g·mL-1 for PMMA and 1.7 ± 0.2 g·mL-1 for silica particles, which perfectly agrees with the nominal values. Once we have tested our technique, MCF-7 human breast adenocarcinoma cells are characterized (1.11 ± 0.08 g·mL-1) with high throughput (300 cells/minute) observing a dependency with their size, opening the door for individual cell cycle studies., This work was supported by the European Union’s Horizon 2020 research and innovation program under European Research Council Grant 681275-LIQUIDMASS-ERC-CoG-2015, project CELLTANGLE reference RTI2018-099369-B-I00, project MOMPs reference TEC2017-89765-R, Asociación Elena Torres (contract OTR04893) and FERO Foundation (Grant OTR06145). The service from the Micro and Nanofabrication Laboratory (MiNa) and X-SEM Laboratory, is funded by MCIU (CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanomechanical Molecular Mass Sensing Using Suspended Microchannel Resonators

  • Martín-Pérez, Alberto
  • Ramos Vega, Daniel
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
In this work we study the different phenomena taking place when a hydrostatic pressure is applied in the inner fluid of a suspended microchannel resonator. Additionally to pressure-induced stiffness terms, we have theoretically predicted and experimentally demonstrated that the pressure also induces mass effects which depend on both the applied pressure and the fluid properties. We have used these phenomena to characterize the frequency response of the device as a function of the fluid compressibility and molecular masses of different fluids ranging from liquids to gases. The proposed device in this work can measure the mass density of an unknown liquid sample with a resolution of 0.7 µg/mL and perform gas mixtures characterization by measuring its average molecular mass with a resolution of 0.01 atomic mass units, This work was supported by the European Union’s Horizon 2020 research and innovation program under European Research Council grant 681275-LIQUIDMASS-ERC-CoG-2015 and the Spanish Science Ministry (MINECO) through project MOMPs TEC2017-89765-R. The service from the Micro and Nanofabrication Laboratory (MiNa) and X-SEM Laboratory, is funded by MCIU (CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Dynamic Range Nanowire Resonators

  • Molina Fernández, Juan
  • Escobar, Javier Enrique
  • Ramos Vega, Daniel
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Dynamic range quantifies the linear operation regime available in nanomechanical resonators. Nonlinearities dominate the response of flexural beams in the limit of very high aspect ratio and very small diameter, which leads to expectation of low dynamic range for nanowire resonators in general. However, the highest achievable dynamic range for nanowire resonators with practical dimensions remains to be determined. We report dynamic range measurements on singly clamped silicon nanowire resonators reaching remarkably high values of up to 90 dB obtained with a simple harmonic actuation scheme. We explain these measurements by a comprehensive theoretical examination of dynamic range in singly clamped flexural beams including the effect of tapering, a usual feature of semiconductor nanowires. Our analysis reveals the nanowire characteristics required for broad linear operation, and given the relationship between dynamic range and mass sensing performance, it also enables analytical determination of mass detection limits, reaching atomic-scale resolution for feasible nanowires., This work was supported by the ERC CoG Grant 681275 “LIQUIDMASS” and by the Spanish Science, Innovation and Universities Ministry through Projects “EXOFLUX” (PGC2018-101762-B-I00) and “MOMPs” (TEC2017-89765- R). E.G.-S. acknowledges financial support by Fundación General CSIC through the ComFuturo program. We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC13-4E-1794 with support from FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Resonadores Microcapilares Transparentes para la Caracterización Multiparamétrica de Células

  • Martín-Pérez, Alberto
Tesis Doctoral inédita leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamento de Física de Materiales. Fecha de Lectura: 23-07-2021, Los microcanales suspendidos resonantes han demostrado ser una técnica muy útil para la detección y caracterización de partículas suspendidas en medios líquidos (especialmente células) a través de la medida de su masa. Gracias a la integración de un canal microfluídico dentro de un resonador mecánico, estos dispositivos permiten aprovechar la gran sensibilidad en masa de un resonador mecánico oscilando en vacío (o atmósfera gaseosa) mientras se trabaja con partículas o células suspendidas en un medio líquido (que fluye a través del microcanal integrado en el dispositivo). En los trabajos previos al desarrollo de esta tesis doctoral en este tipo de dispositivos, sólo podían medir la masa boyante de las partículas (diferencia entre la masa de la partícula y del líquido desplazado por la misma), no obstante, este parámetro no permite una distinción unívoca entre distintos tipos de partículas ya que, partículas distintas en tamaño y material pueden presentar el mismo valor de masa boyante. Para superar este problema, en la presente tesis doctoral, Resonadores Microcapilares Transparentes para la Caracterización Multiparamétrica de Células, se proponen nuevos conceptos para el desarrollo de microcanales suspendidos resonantes a fin de conseguir la medida simultánea de múltiples parámetros físicos de estas partículas coloidales, poniendo especial interés en su aplicación a la caracterización de células en entornos fisiológicos. Para ello, se ha desarrollado un proceso de fabricación de microcanales suspendidos resonantes basado en la integración de un capilar de sílice sobre un sustrato reflectante (resonador microcapilar transparente, RMT). Para la transducción de estos dispositivos se ha empleado un sistema interferométrico, que permite medir simultáneamente y en tiempo real la frecuencia de resonancia (señal mecánica) y la potencia de luz reflejada (señal óptica) por estos dispositivos., Este trabajo ha sido apoyado por el programa de investigación e innovación de la Unión Europea Horizon 2020 del European Research Council a través del proyecto Liquidmass (681275-LIQUIDMASS-ERC-CoG-2015). Así mismo, este trabajo ha contado con el apoyo del servicio de Micro y Nanofabricación (MiNa) del IMN, el cual está financiado por la Comunidad de Madrid a través del proyecto S2013/ICE-2822 (Space-Tec) con soporte de la UE (FEDER, FSE). También se ha contado con el apoyo del laboratorio X-SEM del IMN, el cual está financiado por el MINECO a través del proyecto CSIC13-4E-1794 con soporte de la Unión Europea (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Optomechanical detection of vibration modes of single bacterium

  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Favero, Iván
  • Lemaître, Aristide
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Resumen del trabajo presentado en la Conferencia Española de Nanofotónica (CEN2021), celebrada de forma virtual del 20 al 22 de septiembre de 2021, Vibration modes of biological particles such as proteins, viruses and bacteria involve coherent structural vibrations at frequencies in the THz and GHz domains. These vibration modes carry information on its structure and mechanical properties that play a pivotal role in many relevant biological processes. Despite the rapid advances of optical spectroscopy techniques, detection of vibration modes of single bioparticles has remained elusive. Here we harness a particular regime in the physics of mechanical resonator sensing that serves for detecting them. By depositing single bacterium on the surface of ultra-high frequency optomechanical disk resonators, we demonstrate that the vibration modes of the disk and bacterium hybridize when their associated frequencies are similar (Figure). A general theoretical framework is developed to describe the different regimes that can be found when an analyte adsorbs on a mechanical resonant sensor. The model recovers the classical inertial mass sensing regime as a limit case of a more general problem. Theory, numerical calculations and experiments show excellent agreement, allowing to retrieve the eigenfrequencies and mechanical loss of the bacterium vibration modes. Our method is applied for analysis of the effect of hydration on the vibrational properties of a single bacterium. This work opens the door for a new class of vibrational spectrometry based on the use of high frequency mechanical resonators with the unique capability to obtain information on single biological entities, This work was supported by the European Union’s Horizon 2020 under grants agreement no. 731868 – VIRUSCAN, 681275 – LIQUIDMASS- ERC- CoG-2015 and 770933-NOMLI-ERC-CoG 2017. E. Gil-Santos acknowledge financial support by the Spanish Science and Innovation Ministry through the projects PID2019-109765RA-I00 and RYC2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Desarrollo de Biosensores Nanomecánicos y Optoplasmónicos para la Detección Ultrasensible de Proteínas

  • García-López, Sergio
Tesis Doctoral leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamento de Física de la Materia Condensada. Fecha de Lectura: 01-04-2022.--Calificación: CumLaude, La presente tesis doctoral titulada “Desarrollo de Biosensores Nanomecánicos y Optoplasmónicos para la Detección Ultrasensible de Proteínas” ha sido realizada en el laboratorio de Bionanomecánica del Instituto de Micro y Nanotecnología (IMN-CNM) perteneciente al Consejo Superior de Investigaciones Científicas (CSIC) dirigida por el Profesor Doctor Francisco Javier Tamayo de Miguel y la Doctora Priscila Kosaka Monteiro (Instituto de Micro y Nanotecnología - CSIC) y bajo la tutela del Doctor Julio Gómez Herrero (Facultad de Ciencias, Departamento de Física de la Materia Condensada de la Universidad Autónoma de Madrid). El principal objetivo de esta tesis doctoral ha sido el desarrollo de biosensores en los cuales, combinando dos tipos de transducciones; la transducción nanomecánica y la transducción optoplasmónica, se lleva a cabo la detección de proteínas. Para ello se ha estandarizado el protocolo para la funcionalización de micropalancas de silicio, el anclaje de anticuerpos a las mismas y la funcionalización de nanopartículas de oro de 100 nm con anticuerpos. Del mismo modo que las micropalancas, adaptando el protocolo según lo requería y haciendo uso de la transducción optoplasmónica, se han utilizado superficies de silicio de 5 x 5 mm2 para su futura implementación en clínicas. Esta tesis doctoral se divide en 4 capítulos y un apéndice A. El primer capítulo consta de una introducción que abarca el estado del arte de los sensores utilizados en la detección de partículas biológicas, concretamente de los sensores nanomecánicos. Así mismo, se hace una revisión de las distintas técnicas empleadas en la actualidad para la detección de biomarcadores, haciendo hincapié en la importancia del desarrollo de nuevas tecnologías que sean capaces de descubrir nuevos marcadores que se encuentran en la parte desconocida del proteoma plasmático humano, como el uso de biosensores nanomecánicos y optoplasmónicos para el descubrimiento de dichas proteínas, para su utilización en enfermedades. En el segundo capítulo se abordan los materiales y métodos empleados a lo largo de esta tesis doctoral. En dicho capítulo encontraremos los diferentes reactivos, productos y equipos utilizados. Además de explicar con detalle en que consiste el proceso de funcionalización de las superficies de silicios para la realización del inmunoensayo en el proceso de bioreconocimiento. El tercer capítulo se centra en el desarrollo y validez de un nanosensor híbrido para la detección de proteínas utilizando tres líneas celulares de cáncer de mama: MCF-10A, MCF-7 y MDA-MB-231, siendo una línea sana, una tumoral y otra tumoral metastásica respectivamente. Así mismo, tras la validación del nanosensor, se utilizaron muestras de suero de pacientes con cáncer de mama como prueba de concepto en la detección de la proteína pAKT (Ser473) y la mutación G13D en KRAS haciendo uso del nanosensor optoplasmónico. Finalmente, en el último capítulo se aplican los métodos desarrollados a lo largo de la tesis utilizando superficies de silicio de 5 x 5 mm2 para el desarrollo de un sensor optoplasmónico para la detección de las proteínas S1 y N del virus SARS-CoV-2 a concentraciones ultrabajas. En el apéndice A se aborda la explicación del desarrollo del sensor optoplasmónico para la detección de la Interleucina 11 (IL-11) en suero., Este trabajo ha sido apoyado por el programa de investigación e innovación de la Unión Europea Horizon 2020 del European Reseach Council a través del proyecto Liquidmass (681275-LIQUIDMASS-ERC-CoG-2015), por el Ministerio de Ciencia, Innovación y Universidades de España a través del proyecto CELLTANGLE (RTI2018-099369-B-I00), por el proyecto de la Comunidad de Madrid iLUNG-CM (B2017/BMD-3884), por la Plataforma Telemática Interdisciplinar denominada Salud Global (PTI Salud Global) del Consejo Superior de Investigaciones Científicas (CSIC) a través del proyecto Covid-19 (202050E156 - CSIC-COV19-035), por la fundación Fero (209376) y por la Asociación Elena Torres por la investigación contra el cáncer (201917019). Agradecemos particularmente a los pacientes y al Biobanco del Hospital Ramón y Cajal-IRYCIS (B.0000678) integrado en la Plataforma de Biobancos y Biomodelos del ISCIII y al Biobanco IBSP-CV (PT13/0010/0064) integrado en la Red Nacional de Biobancos y en la Red Valenciana de Biobancos su colaboración
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-throughput determination of dry mass of single bacterial cells by ultrathin membrane resonators

  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Gil-Santos, Eduardo
  • Cano-Tortajada, Álvaro
  • San Paulo, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
How bacteria are able to maintain their size remains an open question. Techniques that can measure the biomass (dry mass) of single cells with high precision and high-throughput are demanded to elucidate this question. Here, we present a technological approach that combines the transport, guiding and focusing of individual bacteria from solution to the surface of an ultrathin silicon nitride membrane resonator in vacuum. The resonance frequencies of the membrane undergo abrupt variations at the instants where single cells land on the membrane surface. The resonator design displays a quasi-symmetric rectangular shape with an extraordinary capture area of 0.14 mm2, while maintaining a high mass resolution of 0.7 fg (1 fg = 10−15 g) to precisely resolve the dry mass of single cells. The small rectangularity of the membrane provides unprecedented frequency density of vibration modes that enables to retrieve the mass of individual cells with high accuracy by specially developed inverse problem theory. We apply this approach for profiling the dry mass distribution in Staphylococcus epidermidis and Escherichia coli cells. The technique allows the determination of the dry mass of single bacterial cells with an accuracy of about 1% at an unparalleled throughput of 20 cells/min. Finally, we revisit Koch & Schaechter model developed during 60 s to assess the intrinsic sources of stochasticity that originate cell size heterogeneity in steady-state populations. The results reveal the importance of mass resolution to correctly describe these mechanisms., This work was supported by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 731868—VIRUSCAN and by the ERC CoG Grant 681275 “LIQUIDMASS”. We acknowledge the service from the Micro and Nanofabrication Laboratory an X-SEM laboratory at IMN-CNM funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC13-4E-1794 with support from FEDER, FSE). E.G.S. acknowledges financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-Throughput Mass Measurement Of Single Bacterial Cells By Silicon Nitride Membrane Resonators

  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Gil-Santos, Eduardo
  • Cano-Tortajada, Álvaro
  • Papanastasiou, Dimitris
  • Kounadis, Diamantis
  • Panagiotopoulos, Elias
  • Mingorance, Jesús
  • Rodríguez-Tejedor, María
  • San Paulo, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Trabajo presentado en la 36th International Conference on Micro Electro Mechanical Systems (MEMS), celebrada en Munich (Alemania), del 15 al 19 de enero de 2023., © 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., We present a technological approach to precisely measure the dry mass of many individual cells of a bacteria colony. In this technique, bacteria are transported from aqueous solution into gas phase and subsequently guided to the surface of a silicon nitride membrane resonator. Abrupt downshifts in the membrane eigenfrequencies are measured upon every bacterium adhesion and are related to the dry mass of the cell by theoretical methods. We measure the dry mass of Escherichia coli K-12 and Staphylococcus epidermidis with an unprecedented throughput of 20 cells/min and with a mass resolution of ⁓1%. Finally, we apply the Koch & Schaechter model to assess the intrinsic sources of growth stochasticity., This work was supported by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 731868-VIRUSCAN and by the ERC CoG Grant 681275 “LIQUIDMASS”. We acknowledge the service from the Micro and Nanofabrication Laboratory an X-SEM laboratory at IMNCNM funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC12-4E-1794 with support from FEDER, FSE). E. G. S. acknowledges financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detection Limits in Nanomechanical Mass Flow Sensing for Nanofluidics With Nanowire Open Channels

  • Escobar, Javier Enrique
  • Molina Fernández, Juan
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Trabajo presentado en la 36th International Conference on Micro Electro Mechanical Systems (MEMS), celebrada en Munich (Alemania), del 15 al 19 de enero de 2023., © 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Nanomechanical sensing is applied to measure the transport of liquid along the external surface of nanowire open fluidic channels. We integrate nanowire open channels with microcantilever resonators as sensors, enabling larger flow measurements; or use the nanowires simultaneously as open channels and resonators, for quantifying extremely small amounts of liquid. We study the detection limits of both systems and their implications for measuring the transport of ionic liquid from a microdroplet reservoir to Si nanowires when these are partially inserted into the microdroplet in the absence of any electrical signal. We obtain detection limits in the order of tens of femtogram and single attograms for each system, respectively, and a combined sensing range from 1 ag to beyond 10 pg, enabling the detection of transport of liquid volumes down to the zeptoliter scale., This work was supported by the ERC-CoG 681275 “LIQUIDMASS” and by the Spanish Science and Innovation Ministry through Projects “EXOFLUX” (PGC2018-101762-B-I00) and “MOMPs” (TEC2017- 89765- R). We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). E.G.S. acknowledges financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC- 2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Square Membrane Resonators Supporting Degenerate Modes of Vibration for High-Throughput Mass Spectrometry of Single Bacterial Cells

  • Sanz-Jiménez, Adrián
  • Ruz Martínez, José Jaime
  • Gil-Santos, Eduardo
  • Malvar, Óscar
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Cano-Tortajada, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
In nanomechanical mass spectrometry, sensing devices are commonly placed in the vacuum environment and a stream of analytes is directed toward the sensor surface for measurement. Beam structures, such as double-clamped nanobeams and nanocantilevers, are commonly used due to their low inertial mass and the simplicity of the analytical models for mass extraction. The drawback of such structures is their low capture areas, compromising the capture efficiency and throughput of this technique. Bi-axisymmetric resonators, such as ultrathin square or circular membranes, arise as an optimal geometry to maximize capture efficiency while minimizing the device inertial mass. However, these structures present degenerate mechanical modes, whose frequency perturbations upon analyte adsorption are not well described by commonly used models. Furthermore, prior knowledge of the vibration mode shapes of the sensor is crucial for the correct calculation of the analyte’s mass, and the mode shape of degenerate modes may change significantly after every adsorption event. In this work, we present an accurate analytical theory to describe the effect of mass adsorption on the degenerate modes of square membrane resonators and propose two different methods based on the new theory to update the vibration mode shapes after every adsorption event. Finally, we illustrate the problem experimentally obtaining the mass and adsorption position of individual Escherichia coli K-12 bacterial cells on commercial square silicon nitride membranes fabricated with very small tolerances., This work was partially supported by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 731868 VIRUSCAN, by the ERC CoG grant 681275 “LIQUIDMASS”, and by 101034583-H2020-FETOPEN “VIRAIR”. It has received funding from the Spanish Science and Innovation Ministry through projects AES (DTS21/00136/ISCIII/Unión Europea/FEDER), “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/ 10.13039/501100011033/FEDER, UE), “ONCOLIGHT” (PDC2022-133503-I00/MCIN/AEI/10.13039/ 501100011033/European Union/Next Generation EU/ PRTR), “ONCODEEPLASM” (PLEC2021-007892/MCIN/ AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid Y2020/BIO-65194 scCANCER-CM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanomechanical Sensing for Mass Flow Control in Nanowire-Based Open Nanofluidic Systems

  • Escobar, Javier Enrique
  • Molina Fernández, Juan
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Open nanofluidic systems, where liquids flow along the outer surface of nanoscale structures, provide otherwise unfeasible capabilities for extremely miniaturized liquid handling applications. A critical step toward fully functional applications is to obtain quantitative mass flow control. We demonstrate the application of nanomechanical sensing for this purpose by integrating voltage-driven liquid flow along nanowire open channels with mass detection based on flexural resonators. This approach is validated by assembling the nanowires with microcantilever resonators, enabling high-precision control of larger flows, and by using the nanowires as resonators themselves, allowing extremely small liquid volume handling. Both implementations are demonstrated by characterizing voltage-driven flow of ionic liquids along the surface of the nanowires. We find a voltage range where mass flow rate follows a nonlinear monotonic increase, establishing a steady flow regime for which we show mass flow control at rates from below 1 ag/s to above 100 fg/s and precise liquid handling down to the zeptoliter scale. The observed behavior of mass flow rate is consistent with a voltage-induced transition from static wetting to dynamic spreading as the mechanism underlying liquid transport along the nanowires., This work was supported by European Research Council through ERC CoG Grant 681275; project PID2021- 128395OB-I00 funded by MCIN/AEI/10.13039/ 501100011033/FEDER, UE; Projects PDC2022-133944-I00 and PLEC2021-007892 funded by MCIN/AEI/10.13039/ 501100011033 and European Union “NextGenerationEU”/ PRTR; Project Y2020/BIO-65194 funded by Comunidad de Madrid; Grant RYC-2019-026626-I funded by MCIN; Project AES (DTS21/00136) funded by ISCIII/Unión Europea/ FEDER. We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2- SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Estudio de Fluctuaciones Intracelulares Estocásticas de Células Cancerosas con Microscopía Holográfica Digital

  • Cano-Tortajada, Álvaro
Trabajo presentado para lograr el título de Doctor por la Universidad Autónoma de Madrid, Departamento de Física de la Materia Condensada y Física Teórica de la Materia Condensada, Programa de Doctorado en Física de la Materia Condensada, Nanociencia y Biofísica.--©2023 Álvaro Cano Tortajada Todos los derechos reservados / All rights reserved, Las dinámicas celulares se rigen por una gran cantidad de procesos bioquímicos que ocurren simultáneamente. El efecto agregado de todos estos procesos genera un ambiente intracelular con un fondo ruidoso. Estos procesos se generan, bien debido a colisiones aleatorias entre distintas especies moleculares, o bien son producidos activamente por motores moleculares. Encriptadas dentro de las fluctuaciones incoherentes del movimiento intracelular se encuentra la información completa de las dinámicas celulares. En una célula sana hay una gran diversidad de procesos, los cuales son necesarios para mantener su rol dentro del organismo. Durante la carcinogénesis la célula pierde su rol y aumenta su capacidad de proliferación y de invasibilidad. Para ello priman ciertos procesos que fomentan estas capacidades, frente a los mecanismos responsables del correcto cumplimiento de su rol. El metabolismo también se ve alterado. En las células sanas existe un balance energético que regula los procesos activos manteniendo siempre unas reservas de energía. En las células cancerosas no existe este balance, haciendo que el único limitante de consumo de energía sea su disponibilidad. El objetivo principal de esta tesis es el estudio y la caracterización de las distintas etapas del cáncer de mama mediante las fluctuaciones intracelulares. Para ello emplearemos un microscopio holográfico digital comercial, que permite medir de una forma no invasiva, label-free y en condiciones fisiológicas. Para los modelos de las distintas etapas del cáncer emplearemos las líneas celulares MCF-10A (no cancerosa), MCF-7 (tumorales no metastásicas) y MDA-MB-231 (tumorales metastásicas). A lo largo de esta tesis se ha hecho un trabajo exhaustivo de desarrollo de distintos programas de análisis de imagen que nos permiten acceder a las series temporales de las fluctuaciones intracelulares. De éstas se obtienen observables, que caracterizan la malignidad del cáncer. Mediante un estudio espectral conseguimos identificar tres rangos marcados de frecuencia dominados por distintos procesos celulares, los cuales son distintos entre las células no cancerosas y cancerosas. Para ahondar en el origen de estas fluctuaciones se realizan medidas con distintas drogas que inhiben comportamientos celulares y se comparan los cambios. También se analizan las distribuciones espacia- les de movimiento intracelular. Combinando ambas se ha podido tener información completa de las dinámicas celulares dominantes en cada banda de frecuencia, Este trabajo ha sido apoyado mediante el programa de investiga- ción e innovación de la Unión Europea Horizon 2020 a través del pro- yecto Liquidmass (681275-LIQUIDMASS-ERC-CoG-2015) y median- te el proyecto de investigación de la Comunidad de Madrid scCancer (Y2020/BIO-65194scCancer-CM, Peer reviewed