Skip to main content

DEGRADACION FOTOASISTIDA EFICIENTE DE CONTAMINANTES RECALCITRANTES EN AGUAS RESIDUALES CON CATALIZADORES DE CARBONO E INORGANICOS INTEGRADOS EN REACTORES DE FLUJO CONTINUO

CTM2014-56770-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting visible light conversion in the confined pore space of nanoporous carbons

  • Gomis Berenguer, Alicia
  • Iniesta, Jesús
  • Moro, Artur
  • Maurino, Valter
  • Lima, Joao C.
  • Ovín Ania, María Concepción
We showed the effect of commensurate confinement in the pores of nanoporous carbons in the conversion of visible light into a chemical reaction. By using a series of nanoporous carbons with a controlled distribution of pore sizes obtained from a gradual activation under moderate conditions, we have demonstrated the superior conversion of light in the constrained pore space of the carbons compared to values in solution. Besides a more efficient conversion of light, nanopore confinement resulted in a 100–200 nm redshift in the wavelength onset of the photochemical reaction. The visible light activity was boosted in pores which sizes match the dimensions of the confined compound. We attribute this to the enhanced splitting and charge separation of the photogenerated species in the nanopores, due to the proximity of the charge carriers and the adsorbed molecules., COA thanks the financial support of MINECO (CTM2014-56770-R). AGB thanks MINECO for her PhD fellowship (BES-2012-060410)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the Surface Chemistry of Nanoporous Carbons for Enhanced Nanoconfined Photochemical Activity

  • Fernández Velasco, Leticia
  • Gomis Berenguer, Alicia
  • Lima, Joao C.
  • Ovín Ania, María Concepción
We showed the effect of surface oxidation on the conversion of light into a chemical reaction in the confined pore space of nanoporous carbons. The photoactivity of carbons is caused by the combination of high porosity and the presence of photoreactive sites that favor the splitting of the exciton inside the pores, which boosts its efficient use in chemical reactions. The incorporation of O-containing groups in the carbon matrix decreased the photoconversion inside the pores, although values were higher than those attained in solution. This is attributed to the lower stabilization of the exciton through the delocalization within the conjugated sp2 network of the basal planes because of the electron-withdrawing effect of the O-containing groups. The photochemical conversion of light inside the pores is very sensitive to the acidic/basic nature of the O-containing groups of the carbon matrix, and can be enhanced by balancing the surface composition, porosity, and electronic mobility., The financial support of the Spanish MINECO (grant CTM2014- 56770-R) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Moisture insensitive adsorption of ammonia on resorcinol-formaldehyde resins

  • Seredych, Mykola
  • Ovín Ania, María Concepción
  • Bandosz, Teresa J.
Phenolic-formaldehyde resins aged at 85, 90 and 95 °C were used as ammonia adsorbents at dynamic conditions in dry and moist air. To avoid pressure drops 10% bentonite was added as a binder. The initial and hybrid materials (before and after ammonia adsorption) were extensively characterized from the point of view of their porosity and surface chemistry. The results showed that the addition of the binder had various effects on materials’ properties depending on the chemistry of their surface groups. When the phenolic acidic groups were predominant, the largest increase in surface acidity upon the addition of the binder was found. It was linked to the exfoliation of bentonite by polar moieties of the resins, which made acidic groups from aluminosilicate layers available for ammonia adsorption. On this sample, a relatively high amount of ammonia was strongly adsorbed in dry conditions. Insensitivity to moisture is a significant asset of ammonia adsorbents, This work was partially supported by the Spanish MINECO (CTM2014/56770-R). COA thanks her Salvador de Madariaga Mobility Action (PRX12/00290)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis of Porous and Mechanically Compliant Carbon Aerogels Using Conductive and Structural Additives

  • Macías, Carlos
  • Rasines, Gloria
  • Lavela, Tomás E.
  • Zafra, María C.
  • Lavela, Pedro
  • Tirado, José L.
  • Ovín Ania, María Concepción
We report the synthesis of conductive and mechanically compliant monolithic carbon aerogels prepared by sol-gel polycondensation of melamine-resorcinol-formaldehyde (MRF) mixtures by incorporating diatomite and carbon black additives. The resulting aerogels composites displayed a well-developed porous structure, confirming that the polymerization of the precursors is not impeded in the presence of either additive. The aerogels retained the porous structure after etching off the siliceous additive, indicating adequate cross-linking of the MRF reactants. However, the presence of diatomite caused a significant fall in the pore volumes, accompanied by coarsening of the average pore size (predominance of large mesopores and macropores). The diatomite also prevented structural shrinkage and deformation of the as-prepared monoliths upon densification by carbonization, even after removal of the siliceous framework. The rigid pristine aerogels became more flexible upon incorporation of the diatomite, favoring implementation of binderless monolithic aerogel electrodes., This work was partially funded by the Spanish MINECO (CTM2014/56770-R, IPT-2011-1450-310000 ADECAR) and Junta de Andalucía (FQM288). The help of D.L. García in the preparation of the specimens is greatly appreciated. C.O.A. thanks the financial support of the European Research Council through a Consolidator Grant (ERC-CoG-648161-PHOROSOL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the irradiation wavelength on the performance of nanoporous carbon as an additive to TiO2

  • Andrade, Marta A.
  • Mestre, Ana S.
  • Jiménez Carmona, Rocío
  • Carvalho, A. P.
  • Ovín Ania, María Concepción
We report the dependence of the photochemical activity of titania/carbon hybrid catalysts toward the degradation of phenol from solution using polychromatic light and filters. In all cases larger photooxidative efficiencies were obtained using light at 200 nm < λ < 600 nm. The incorporation of a carbon additive to TiO2 increased the photocatalytic performance regardless the illumination conditions, although, the effect was more pronounced at λ > 200 nm. The photocatalytic runs carried out with the nonporous carbon alone confirmed a certain level of intrinsic photoactivity under both irradiation conditions. Nevertheless, a clear deactivation was evident after 60 min of irradiation suggesting that the photoactive sites in the carbon are either consumed or deactivated in the course of the reaction. The composition of the catalyst and the illumination conditions also have a strong effect on the nature of the degradation intermediates, with a marked regioselectivity toward ortho-substitution at high energy photons and when the carbon component is added to the catalyst composition., The authors thank Cordex (Portugal) for kindly supplying sisal. The financial support of the pluriannual funding to CQB (UID/MULTI/00612/2013), and MINECO (CTM2014/56770-R, AIB2010-PT00209) is also acknowledged. MAA and ASM thank FCT for their PhD (SFRH/BD/71673/2010) and Post-Doc (SFRH/BPD/86693/2012) fellowships, respectively. RJC thanks PCTI Asturias Fondos Feder for her Severo Ochoa fellowship. The authors thank Dr. Matos for fruitful discussion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the use of diatomite as antishrinkage additive in the preparation of monolithic carbon aerogels

  • Macías, Carlos
  • Rasines, G.
  • García, T.E.
  • Rodríguez, C.
  • Lavela, P.
  • Tirado, J.L.
  • Ovín Ania, María Concepción
We have synthesized flexible monolithic carbon aerogels by incorporating diatomite as antishrinkage agent during the sol-gel polycondensation of the precursors. The materials displayed elastic properties and preserved their pristine dimensions upon densification by carbonization even after etching of the diatomite, due to the open pore structure of the siliceous additive in the material’s matrix. The aerogels displayed a well-developed porous structure, confirming that the polymerization of the precursors is not impeded; the effect of the additive was independent of the formulation of the aerogels, as evidenced by the behavior of aerogels with varied composition (molar ratio, pH, N-doping)., This work was partially funded by MINECO (grant CTM2014/56770-R, IPT-2011-1450-310000 ADECAR and Feder cofunding). The help of Mr. D.L. García in the preparation of the specimens is greatly appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sulfur-mediated photochemical energy harvesting in nanoporous carbons

  • Gomis Berenguer, Alicia
  • Seredych, Mikola
  • Iniesta, Jesús
  • Lima, Joao C.
  • Bandosz, Teresa J.
  • Ovín Ania, María Concepción
This work provides new insights in the field of applied photochemistry based on semiconductor-free nanoporous carbons and its application to sunlight energy harvesting. Using carbon materials of increasing average pore size, chemical functionalization to introduce a variety of O- and S-containing functional groups and monochromatic light, we have shown the dependence of the photochemical conversion of phenol in the confinement of the carbons nanopore space with the wavelength of the irradiation source, the dimensions of the pore voids and their surface chemistry. The photochemical conversion of phenol inside the carbons pore space was found to be very sensitive to the nature of the S-containing groups and the confinement state of the adsorbed pollutant., COA thanks the financial support of the European Research Council through a Consolidator Grant (ERC-CoG-648161-PHOROSOL) and the Spanish MINECO (CTM2014/56770-R). AGB thanks her PhD fellowship (BES-2012-060410). TJB acknowledges the NSF support (CBET 1133112)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoporous carbon/WO3 anodes for an enhanced water photooxidation

  • Gomis Berenguer, Alicia
  • Celorrio, Verónica
  • Iniesta, Jesús
  • Fermin, David J.
  • Ovín Ania, María Concepción
This work provides new insights in the field of applied photoelectro chemistry based on the use of nanoporous carbons as additives to tungsten oxide for the photooxidation of water under potential bias. Using a nanoporous carbon of low surface functionalization as additive to WO3 we have shown the dependence of the photochemical oxidation of water with the wavelength of the irradiation source. Photoelectrochemical responses obtained under monochromatic illumination show a significant increase in the incident photon-to-current conversion efficiency (IPCE) values for electrodes featuring up to 20 wt% carbon additive. Photoelectrochemical transient responses also show a sharp potential dependence, suggesting that the performance of the electrodes is strongly influenced by the carrier mobility and recombination losses. Despite the modest IPCE values of the W/NC electrodes (due to high bulk recombination and poor electron transport properties of the electrodes), our data shows that the incorporation of an optimal amount of nanoporous carbon additive to WO3 can enhance the carrier mobility of the semiconductor, without promoting additional recombination pathways or shadowing of the photoactive oxide., COA thanks the financial support of the European Research Council through a Consolidator Grant (ERC-CoG-648161-PHOROSOL) and the Spanish MINECO (grants CTM2014/56770-R, CTQ2013-48280-C3-3-R). VC and DJF kindly thank the UK Catalysis Hub for resources and support provided via the membership of the UK Catalysis Hub Consortium and funded by EPSRC (grants EP/ K014706/1, EP/K014668/1, EP/K014854/1, EP/K014714/1 and EP/M013219/1). AGB thanks her PhD fellowship (BES-2012-060410) and VC thanks the UK National Academy and the Royal Society by the support though the Newton International Fellows program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring the textural properties of hierarchical porous carbons using deep eutectic solvents

  • López-Salas, Nieves
  • Carriazo, Daniel
  • Gutiérrez, María C.
  • Ferrer, M. Luisa
  • Ovín Ania, María Concepción
  • Rubio, F.
  • Tamayo, A.
  • Fierro, José L.G.
  • Monte, Francisco del
Soft-template approaches have been frequently applied for the preparation of porous carbons. Most of these processes proved highly effective for the preparation of mesoporous carbons with pore diameters below 10 nm but less explored has been the preparation of carbons with mesopores larger than 10 nm. The lack of syntheses providing large and well-interconnected mesopores is by no means a trivial issue because it limits the achievement of materials suitable for applications where pore surface accessibility is crucial – e.g. electrodes in supercapacitors or adsorbents in flow-through systems, among others. In this work, we have used deep eutectic solvents (DESs, a sort of ionic liquid, that are obtained by complexation of quaternary ammonium salts with hydrogen-bond donors) composed of resorcinol, urea and choline chloride for the preparation – via formaldehyde polycondensation and subsequent carbonization – of hierarchical porous carbons with micropores and large mesopores within the 10 to 20 nm range. The formation of large mesopores took place at the polycondensation stage via a spinodal decomposition process where some components forming the DES acted as precursors of the polymer phase, while some other ones were segregated into a polymer depleted phase. Thus, the ultimate dimension of the mesopores was controlled by the mass ratio between the segregated and condensed phases, and this mass ratio by the molar ratio of the components forming the original DES. We have finally demonstrated that carbons with larger mesopores exhibited better performance as electrodes in supercapacitor cells., The authors thank Spanish MINECO (grants MAT2012‐34811 and CTM2014‐56770‐R) for financial support. N. López‐Salas also acknowledges MINECO for a FPI research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface Modification of a Nanoporous Carbon Photoanode upon Irradiation

  • Gomis Berenguer, Alicia
  • Velo Gala, Inmaculada
  • Rodríguez-Castellón, Enrique
  • Ovín Ania, María Concepción
The photocorrosion of a nanoporous carbon photoanode, with low surface functionalization and high performance towards the photoelectrochemical oxidation of water using simulated solar light, was investigated. Two different light configurations were used to isolate the effect of the irradiation wavelength (UV and visible light) on the textural and chemical features of the carbon photoanode, and its long-term photocatalytic performance for the oxygen evolution reaction. A complete characterization of the carbon showed that the photocorrosion of carbon anodes of low functionalization follows a different pathway than highly functionalized carbons. The carbon matrix gets slightly oxidized, with the formation of carboxylic and carbonyl-like moieties in the surface of the carbon anode after light exposure. The oxidation of the carbon occurred due to the photogeneration of oxygen reactive species upon the decomposition of water during the irradiation of the photoanodes. Furthermore, the photoinduced surface reactions depend on the nature of the carbon anode and its ability to photogenerate reactive species in solution, rather than on the wavelength of the irradiation source. This surface modification is responsible for the decreased efficiency of the carbon photoanode throughout long illumination periods, due to the effect of the oxidation of the carbon matrix on the charge transfer. In this work, we have corroborated that, in the case of a low functionalization carbon material, the photocorrosion also occurs although it proceeds through a different pathway. The carbon anode gets gradually slightly oxidized due to the photogeneration of O-reactive species, being the incorporation of the O-groups responsible for the decreased performance of the anode upon long-term irradiation due to the effect of the oxidation of the carbon matrix on the electron transfer, This work was partially funded by the Spanish MINECO (CTM2014/56770-R) and the European Council Research through a Consolidator Grant (ERC-CoG-648161, PHOROSOL). A.G.B. thanks the Spanish MINECO for their PhD fellowship (BES-2012-0560410)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photochemistry of nanoporous carbons: Perspectives in energy conversion and environmental remediation

  • Gomis Berenguer, Alicia
  • Fernández Velasco, Leticia
  • Velo Gala, Inmaculada
  • Ovín Ania, María Concepción
The interest in the use of nanoporous carbon materials in applications related to energy conversion and storage, either as catalysts or additives, has grown over recent decades in various disciplines. Since the early studies reporting the benefits of the use of nanoporous carbons as inert supports of semiconductors and as electron acceptors that enhance the splitting of the photogenerated excitons, many researchers have investigated the key role of carbon matrices coupled to all types of photoactive materials. More recently, our group has demonstrated the ability of semiconductor-free nanoporous carbons to convert the absorbed photons into chemical reactions (i.e. oxidation of pollutants, water splitting, reduction of surface groups) opening new opportunities beyond conventional applications in light energy conversion. The aim of this paper is to review the recent progress on the application of nanoporous carbons in photochemistry using varied illumination conditions (UV, simulated solar light) and covering their role as additives to semiconductors as well as their use as photocatalysts in various fields, describing the photochemical quantum yield of nanoporous carbons for different reactions, and discussing the mechanisms postulated for the carbon/light interactions in confined pore spaces., This work was partially funded by the Spanish MINECO (CTM2014/56770-R) and the European Council Research through a Consolidator Grant (ERC-CoG-648161-PHOROSOL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A green and fast approach to nanoporous carbons with tuned porosity: UV-assisted condensation of organic compounds at room temperature

  • Balan, Lavinia
  • Cocina Fernández de Córdoba, María
  • Zahier, Mohamed
  • Ovín Ania, María Concepción
This work reports a green and fast approach to the synthesis of nanoporous carbon materials based on the UV-assisted condensation of organic compounds as precursors. This new approach offers several improvements over the classical soft template and sol-gel routes for the synthesis of materials: versatility of organic precursors, shorter synthesis time, and ambient conditions. Owing to the specificity of the UV-assisted reactions mechanisms, organic compounds of varied chemical composition can be used as precursors in the preparation of nanoporous carbons with tuned porous features. The method consisted in the exposure of an aqueous solution of the organic precursors to UV light for 60 min at room temperature in the absence of a catalyst, allowing an outstanding shortening of the synthesis time compared to sol-gel routes. Furthermore, UV irradiation promoted the cross-linking of the polymer chains of precursors at room temperature, as opposed to classical methods that require an additional step at mild/high temperatures. By changing the chemistry of the organic compound used as precursor, it was possible to modulate the surface area (from 10 to 720 m2 g−1) and the porosity of the synthesized carbons within the micro-/mesopore range. The obtained carbons also presented varied morphology depending on the precursor, from dense aggregates to ordered hexagonal arrangements of nanometric dimensions., This study was supported by the European Research Council through a ERC-Consolidator Grant (648161-PHOROSOL) and the Spanish MINECO (grant CTM2014-56770-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Designing micro- and mesoporous carbon networks by chemical activation of organic resins

  • Gomis Berenguer, Alicia
  • García González, Raquel
  • Mestre, Ana S.
  • Ovín Ania, María Concepción
Carbon xerogels with ultrahigh micro- and mesopore volumes were synthesized from the activation of polymeric resins prepared by sol–gel polycondensation of resorcinol/formaldehyde mixtures in basic medium and subcritical drying. Various activating conditions (e.g., agent, temperature, impregnation conditions) were used and it was found that the textural features of the resulting carbon xerogels are linked to the experimental procedure of the activation reaction to promote the porosity development. The shrinkage and structural collapse of the fragile resins typically obtained upon annealing at high temperatures (during carbonization and/or physical activation) is suppressed when the impregnation of the chemical activating agent is performed under controlled conditions. If the alkaline reagent (either KOH or K2CO3) is put in contact with the resin by wet impregnation (liquid/solid); under such conditions, the intimate contact between both compounds allows the formation of microporosity during the activation along with the enlargement and/or preservation of the mesoporosity of the pristine resin. Furthermore, the chemical activation via wet impregnation allows the combination of high surface areas and the preservation (even higher development) of the mesoporosity created during the synthesis of the resin. The effect of the impregnation method was found highly dependent of the reagent and activation temperature, highlighting the possibility to design micro-mesoporous carbon xerogels at low temperatures with a subtle control of the activation conditions., Authors thank the inancial support of the European Research Council through a Consolidator Grant (ERC-CoG-648161-PHOROSOL), the Spanish MINECO (Grants CTM2014/56770-R) and FCT Portugal (Project PEst-OE/QUI/UI0612/2013)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Room temperature sintering of polar ZnO nanosheets: I-evidence

  • Fernández Pérez, Amparo
  • Rodríguez Casado, Verónica
  • Valdés-Solís Iglesias, Teresa
  • Marbán Calzón, Gregorio
Polar ZnO nanosheets of a high specific surface area (∼120 m2 g−1) were subjected to storage under different atmospheres at room temperature and analyzed for changes in their textural and crystal properties. During their storage under laboratory conditions (in closed transparent polypropylene vials kept under the light of the laboratory on worktop tables) the nanosheets lost up to 75% of their specific surface area in approximately two months, with most of the loss occurring during the first two weeks. The narrow mesoporosity (∼5 nm pore size) became filled with ZnO during the process. No loss or gain in weight was detected. The loss of specific surface area took place under all of the atmospheres assayed, in the following order: moist air (with or without light) > moist CO2-free atmosphere (with or without light and/or oxygen) > dry CO2-free oxygen-containing atmosphere (with or without light) > dry inert atmosphere (with light) > dry inert atmosphere (in the dark). During storage the ZnO crystals grew mainly by the partial merging of their polar surfaces in a process triggered by the action of moisture, oxygen and, in the absence of these two agents, light. The mechanism of this intriguing phenomenon will be analyzed in detail in the second part of this work., The financial support for this research work provided by the Spanish MINECO (CTM2014-56770-R project) and FEDER Funds (GRUPIN14-102, Principado de Asturias) is gratefully acknowledged. AFP is grateful to the Spanish MINECO for the award of a contract (BES-2015-072274)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Room temperature sintering of polar ZnO nanosheets: II-mechanism

  • Fernández Pérez, Amparo
  • Rodríguez Casado, Verónica
  • Valdés-Solís Iglesias, Teresa
  • Marbán Calzón, Gregorio
In a previous work by the authors (A. Fernández-Pérez el al., Room temperature sintering of polar ZnO nanosheets: I-evidence, 2017, DOI: 10.1039/C7CP02306E), polar ZnO nanosheets were stored at room temperature under different atmospheres and the evolution of their textural and crystal properties during storage was followed. It was found that the specific surface area of the nanosheets drastically decreased during storage, with a loss of up to 75%. The ZnO crystals increased in size mainly through the partial merging of their polar surfaces at the expense of narrow mesoporosity, in a process triggered by the action of moisture, oxygen and, in their absence, by light. In the present work, a set of spectroscopic techniques (FTIR, Raman and XPS) has been used in an attempt to unravel the mechanism behind this spontaneous sintering process. The mechanism starts with the molecular adsorption of water, which takes place on Zn atoms close to oxygen vacancies on the (100) surface, where H2O dissociates to form two hydroxyl groups and to heal one oxygen vacancy. This process triggers the room temperature migration of Zn interstitials towards the outer surface of the polar region. What were previously interstitial Zn atoms now gradually occupy the mesopores, with interstitial oxygen being used to build up the O sublattice until total occupancy of the narrow mesoporosity is achieved., The financial support for this research work provided by the Spanish MINECO (CTM2014-56770-R project) and FEDER Funds (GRUPIN14-102, Principado de Asturias) is gratefully acknowledged. AFP is grateful to the Spanish MINECO for the award of a contract (BES-2015-072274)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Load-dependent surface diffusion model for analyzing the kinetics of protein adsorption onto mesoporous materials

  • Marbán Calzón, Gregorio
  • Ramírez Montoya, Luis Adrián
  • García Álvarez, Héctor
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
The adsorption of cytochrome c in water onto organic and carbon xerogels with narrow pore size distributions has been studied by carrying out transient and equilibrium batch adsorption experiments. It was found that equilibrium adsorption exhibits a quasi-Langmuirian behavior (a g coefficient in the Redlich-Peterson isotherms of over 0.95) involving the formation of a monolayer of cyt c with a depth of ∼4 nm on the surface of all xerogels for a packing density of the protein inside the pores of 0.29 g cm–3. A load-dependent surface diffusion model (LDSDM) has been developed and numerically solved to fit the experimental kinetic adsorption curves. The results of the LDSDM show better fittings than the standard homogeneous surface diffusion model. The value of the external mass transfer coefficient obtained by numerical optimization confirms that the process is controlled by the intraparticle surface diffusion of cyt c. The surface diffusion coefficients decrease with increasing protein load down to zero for the maximum possible load. The decrease is steeper in the case of the xerogels with the smallest average pore diameter (∼15 nm), the limit at which the zero-load diffusion coefficient of cyt c also begins to be negatively affected by interactions with the opposite wall of the pore., The financial support for this research work provided by the Spanish MINECO (CTM2014-56770-R project) and FEDER Funds (GRUPIN14-102 and GRUPIN14-117, Principado de Asturias) is gratefully acknowledged. LARM thanks CONACYT (México) for the award of a post-doctoral grant (CVU No 330625, 2016). We thank Dr. J.B. Parra for his suggestions relating the discussion about the pore size distributions of the materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Visible light spectroscopic analysis of Methylene Blue in water; the resonance virtual equilibrium hypothesis

  • Fernández Pérez, Amparo
  • Valdés-Solís Iglesias, Teresa
  • Marbán Calzón, Gregorio
After a critical approach to the centennial literature on Methylene Blue self-aggregation in water, accurate visible-light absorption spectra and thermodynamic equilibrium constants for the monomeric and dimeric forms of this dye in water at different temperatures were obtained by means of a novel procedure based on the Beer-Lambert equation. A thermo-solvatochromic effect was clearly detected in the monomer spectra, which we believe to be the main source of inaccuracy in all previous works. The only published explanation for this phenomenon, the existence of a colorless form of the monomer, is refuted here. Instead, a new notion has been introduced; the resonance virtual equilibrium hypothesis. According to this hypothesis the temperature-dependent absorption behavior of the monomer is provoked by the change in its electron charge distribution with the variation in the temperature-dependent dielectric constant of water. The monomer charge distribution stands between those of the virtual resonance forms, being the absorption spectrum of the monomer a composition of the theoretical spectra for the virtual mesomers, whose proportion is established by a temperature-dependent equilibrium constant. The application of this hypothesis allowed the virtual equilibrium constants and spectra for the mesomers to be evaluated with remarkable accuracy., The financial support for this research work provided by the Spanish MINECO (CTM2014-56770-R project) and FEDER Funds (GRUPIN14-102, Principado de Asturias) is gratefully acknowledged. AFP is grateful to the Spanish MINECO for the award of a contract (BES-2015-072274)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Room temperature sintering of polar ZnO nanosheets: III-Prevention

  • Fernández Pérez, Amparo
  • Marbán Calzón, Gregorio
In this study, the coating of high specific surface area stainless steel wire mesh-supported ZnO with a monolayer of silica was investigated with the aim of preventing the room temperature sintering of the polar ZnO sample (75% specific surface area loss in two months in the presence of moisture, oxygen or light). This research study is the logical conclusion of previous works by the authors in which the room temperature sintering of polar ZnO was detected and analyzed for the first time (https://doi.org/10.1039/c7cp02306e and https://doi.org/10.1039/c7cp02307c). The ZnO surface was modified by inducing a substitution reaction between 3-aminopropyltriethoxysilane (APTES) and surface hydroxyls, followed by a low-temperature calcination step to produce a monolayer of silica (2 atom%) that would provide stability to the ZnO surface. The textural and structural characteristics of the protected material hardly differ from those of freshly calcined (unprotected) ZnO samples, and remain unchanged for long storage periods. This is due to the action of the silica coating, which causes an increase in the number of oxygen interstitials and a decrease in the amount of oxygen vacancies. The combination of these factors provokes the immobilization of the Zn interstitials, whose mobility is responsible for the room temperature sintering of unprotected ZnO. The efficiency of the polar ZnO as a sacrificial template remains unchanged in the presence of silica. Additionally, the photocatalytic activity of the protected ZnO sample in the continuous photodegradation of methylene blue shows a slight improvement compared to that of the unmodified sample calcined at the same temperature. Moreover, losses of Zn during the reaction diminished., The financial support for this research work provided by the Spanish MINECO (CTM2014-56770-R) and FEDER Funds (GRUPIN14-102, Principado de Asturias) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A new continuous flow-through structured reactor for the photodegradation of aqueous contaminants

  • Fernández Pérez, Amparo
  • Rodríguez Casado, Verónica
  • Valdés-Solís Iglesias, Teresa
  • Marbán Calzón, Gregorio
A flow-through photo reactor with a stainless steel mesh-supported ZnO catalytic disc has been designed in this work. The preparation method of the catalyst includes the use of Triton™ X-100 and methylene blue (MB) in order to enhance the homogeneity of the ZnO and its adhesion to the mesh. The catalysts exhibit a high surface area (∼100 m2/g). The photocatalytic reaction is restricted to the most external non-polar edges of the ZnO nanosheets due to the low pH of the MB solution and to the fact that the polar surfaces are hydrophobic. Despite this, the performance of the flowthrough reactor is superior to that of other micro fluidic systems. The catalyst undergoes a slight deactivation during the reaction, though the activity can be restored, without causing any structural changes, by passing water through the catalyst under UV irradiation. The loss of ZnO through photocorrosion is low, especially when compared to the loss experienced by the same catalyst prepared without using methylene blue., The financial support for this research work provided by the Spanish MINECO (CTM2014-56770-R) and FEDER Funds (GRUPIN14-102, Principado de Asturias) is gratefully acknowledg, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Titanium dioxide: A heterogeneous catalyst for dark peroxidation superior to iron oxide

  • Fernández Pérez, Amparo
  • Marbán Calzón, Gregorio
In this work, high specific surface area stainless steel wire mesh-supported TiO2 catalysts (SSWM-TiO2) were synthesized by a modification of the sacrificial polar template accelerated hydrolysis method that permits over 98 mol% purity to be attained. The TiO2 catalysts show an excellent activity in the heterogeneous peroxidation of aqueous methylene blue (MB) in the dark, with clear superiority over Degussa P25® powders or even over the highly active Fe2O3 particles. With the results of batch reaction experiments and the physicochemical characterization of the catalysts, a new reaction mechanism was proposed. This considers the adsorption of H2O2 on an acid site of the catalyst that then forms a hydroperoxyl-Ti activated complex with the help of a nearby Ti4+−OH center (two-site H2O2 activation). MB reacts from the solution with the activated complex following an Eley-Rideal mechanism. A kinetic analysis with the best performing catalyst, TiO2 calcined at 350 °C, resulted in a new kinetic model equation for the proposed reaction mechanism. The increase of the acid sites fraction on increasing the catalyst dosage and the deactivation rate due to adsorption of aromatic reaction intermediates on the acid sites were also included in the kinetic equation. A flow-through reactor was tested with the structured catalysts for continuous flow mode operation. The SSWM-TiO2 catalysts showed high activity and stability under the different reaction conditions, with a slight deactivation degree after long reaction periods, though the activity was restored after a simple regeneration step with H2O2/water mixture under solar light irradiation., The financial support for this research work provided by the Spanish MINECO (CTM2014-56770-R) and FEDER Funds (GRUPIN2018-IDI/2018/000148), Principado de Asturias) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Visible Light Spectroscopic Analysis of Methylene Blue in Water; What Comes after Dimer?

  • Fernández Pérez, Amparo
  • Marbán Calzón, Gregorio
As in our previous work, most attempts to study the self-aggregation of methylene blue (MB) in water have been limited to the dimer. In the present work, we have analyzed the self-aggregation of MB in water beyond the dimeric form. For this purpose, the visible light absorption spectra of a large number of aqueous solutions of MB (1.1 × 10–6 to 3.4 × 10–3 M) and NaCl (0.0–0.15 M) at different temperatures (282–333 K) have been fed to a mathematical routine in order to determine the potential existence of a unique higher-order aggregate without any preconception about the aggregation order or about the need of counterions, such as chloride, for compensating the positive charge of the aggregates. Contrary to the common belief that the trimer is the dominant aggregate at high MB concentration, to our surprise we found that the tetramer acting alone, and without any counterion, is the higher-order aggregate that yields the best fitting to all the experimental absorbance spectra, with a very low average relative error of 0.04 ± 0.34%. Also contrary to previous assumptions, it has emerged quite evidently that this aggregate is present in the solution at MB concentrations below 3.4 × 10–5 M (11 ppm), though to a rather low extent. This has brought the need for the recalculation of the visible light absorption spectrum and the thermodynamic parameters for the dimer, which along with those for the tetramer are the main contributions of the present work., The financial support for this research work provided by the Spanish MINECO (CTM2014-56770-R project) and FEDER Funds (GRUPIN2018 (IDI/2018/000148), Principado de Asturias) is gratefully acknowledged. AFP is grateful to the Spanish MINECO for the award of a contract (BES-2015-072274), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Eficacia del permanganato potásico en la degradación de cianuro y tiocianato en aguas residuales mineras, Effectiveness of potassium permanganate for the degradation of cyanide and thiocyanate from mine wastewater

  • Fernández Pérez, Begoña
  • Viña Mediavilla, Juan José
  • Ayala Espina, Julia
  • Ovín Ania, María Concepción
This work was focused on evaluating the viability of potassium permanganate as an oxidizing agent for the simultaneous degradation of cyanides and thiocyanates from an acid mine wastewater. Data has confirmed the effectiveness of permanganate solutions for the oxidation of cyanides, with removal efficiencies between 95-100 %, in waters with an initial concentration of cyanides of 312 mg/L and thiocyanates of 314 mg/L. In contrast, the chemical oxidation of thiocyanates with permanganate was less efficient, with overall yields below 50 % for the highest oxidant concentrations assayed. Furthermore, the studies from synthetic water confirmed that the partial oxidation of thiocyanates using permanganate results in the release of a residual amount of cyanides that remains in the treated water. For this reason, the simultaneous oxidation of cyanides and thiocyanates in not complete for any of the studied industrial wastewaters, finding not negligible residual concentrations of both cyanide and thiocyanate, after the reaction with permanganate. This makes it necessary to consider further treatments of the wastewater for a full removal of the cyanide species., Agradecemos al Gobierno español por su apoyo a través de los programas MINECO (Ministerio de Economía y Empresa de España), becas CTM2014-56770-R y MAT2016-78155-C2-1-R., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced electrochemical response of carbon quantum dot modified electrodes

  • Algarra, Manuel|||0000-0003-2410-8430
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Radotić, Ksenija
  • Mutavdzic, D.
  • Ania, Conchi|||0000-0001-9517-8132
  • Lázaro-Martínez, Juan Manuel M.|||0000-0002-7189-6874
  • Jiménez-Jiménez, José|||0000-0002-9727-0570
  • Rodríguez-Castellón, Enrique|||0000-0003-4751-1767
  • Valle, Manel del|||0000-0002-1032-8611
A glassy carbon electrode (GCE) was surface-modified with carbon quantum dots (CQDs) and applied for the effective enhancement of the electrochemical signal for dopamine and uric acid determination. CQDs were prepared from graphite by a green modification of the Hummers method. They were characterized by FTIR-ATR, XPS, solid-state NMR, fluorescence and Raman spectroscopies. TPD-MS analysis was applied to characterize the functionalization of the surface. The CQDs were assembled on the glassy carbon electrode by adsorption because of the large number of carboxy groups on their surface warrants effective adsorption. The modified GCE exhibits a sensitivity that is almost 10 times better than of the bare GCE. The lower limits of detection are 1.3 μM for uric acid and 2.7 μM for dopamine.