Skip to main content

NUEVOS SISTEMAS CATALITICOS PARA LA REDUCCION INTEGRAL DE EMISIONES DE N2O, DE EFECTO INVERNADERO ELEVADO

CTM2017-82335-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

MnO2-supported catalytic bodies for selective reduction of NO with NH3: Influence of NO2 and H2O

  • Serrano-Lotina, Ana M.
  • Iglesias Juez, Ana
  • Monte, Manuel
  • Ávila García, Pedro
[EN] Catalytic bodies based on MnO, TiO and sepiolite showed an improved behavior for selective reduction of NO with NH at low temperatures. In this work, the influence of Mn %wt and NO and/or water vapor presence was assessed. The materials were prepared by wet equilibrium impregnation of the pre-shaped support. All the catalysts exhibited the characteristic diffraction peaks of TiO-anatase, hexagonal MnOand anhydrous sepiolite. According to SEM-EDX, MnO was preferentially deposited over TiO The optimum nominal content of Mn was 7.5 %wt, what may be related to an appropriate particle dispersion that confers the suitable properties: lower acid strength, and better redox properties with improved reducibility. This catalyst was then evaluated under NO and/or HO presence. NO improved the catalytic response and the best result was obtained with 1:1 NO:NO ratio showing 90 % NO conversion and 97 % N selectivity at very low temperature, 110 °C. A higher amount of NHNO seems to be formed with the increase in the NO/NO ratio causing a modification of N selectivity. Although water presence affected the performance, mainly at low temperatures, the catalyst showed good resistance to water vapor at temperatures above 180 °C maintaining good activity (90 % of NO conversion and 96 % of N selectivity). When NO was co-added to the feed, a beneficial effect was again observed with 91 % of NO and 95 % of N selectivity converted at 143 °C. At low temperatures, deactivation has to do with a competitive effect of HO with NO towards the adsorption centers, which decreases the concentration of nitrate species adsorbed on the surface. However, the adsorption of ammonia was less affected. 7.5 Mn catalyst is a highly efficient system to work in real conditions, where there is water in gas stream. In this situation, co-feeding NO improves activity., Financial support from the Spanish Government (RIEN2O,CTM2017-82335-R), and “Comunidad de Madrid” and European Structural Funds (ACES2030, S2018/EMT-4319) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Operando Reactor-Cell with Simultaneous Transmission FTIR and Raman Characterization (IRRaman) for the Study of Gas-Phase Reactions with Solid Catalysts

  • Ternero-Hidalgo, Juan J.
  • Guerrero-Perez, M.Olga
  • Rodriguez-Mirasol, José
  • Cordero, Tomás
  • Bañares, Miguel A.
  • Portela, Raquel
  • Bazin, Philippe
  • Clet, Guillaume
  • Daturi, Marco
Raman and transmission FTIR spectroscopic techniques have been coupled in a new homemade reactor-cell designed in a joint CSIC-LCS collaboration. The setup is easily adapted to any FTIR and fiber-coupled Raman spectrometers and gas analysis techniques. It allows for simultaneous operando FTIR and Raman spectroscopic measurement, which provide complementary characterization of adsorbed species, reaction intermediates, and structural properties of the catalyst. This system was validated with the study of vanadium-based catalysts during propane oxydehydrogenation (ODH). The combined use of both spectroscopies with gas analysis techniques to measure the activity contributes to the understanding of propane ODH and the identification of the role of different oxygen species bound to vanadium sites. For example, the simultaneous characterization of the catalyst under the same conditions by IR and Raman confirms that the V═O mode has the same frequency in both spectroscopies and that bridging oxygen sites (V - O - V, V - O - Zr) present higher activity than terminal V═O bonds. These results demonstrate the high potential of the new simultaneous transmission IR-Raman operando rig to correlate the activity and the structure of catalysts, thus assisting the rational design of catalytic processes., Authors acknowledge the FEDER-Region Basse-Normandie (France)-CNRS for a Chaire d’Excellence, which resulted in the implementation of the “IRRaman” rig and a research stay allowing for the performance of these investigations. This work was also supported by the Spanish Ministry of Economy and Competitiveness and FEDER (CTQ2012-36408, CTQ2015-68654-R, and CTM2017-82335-R). J.J.T.H. acknowledges the assistance of the Ministry of Economy and Competitiveness of Spain for the award of a FPI Grant (BES-2013-064425) and the award for performing his stay at ENSICAEN (EEBB-I-16-10749).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering operando methodology: Understanding catalysis in time and space

  • Portela, Raquel
  • Pérez Ferreras, Susana
  • Serrano-Lotina, Ana M.
  • Bañares, Miguel A.
The term operando was coined at the beginning of this century to gather the growing efforts devoted to establish structure-activity relationships by simultaneously characterizing a catalyst performance and the relevant surface chemistry during genuine catalytic operation. This approach is now widespread and consolidated; it has become an increasingly complex but efficient junction where spectroscopy, materials science, catalysis and engineering meet. While for some characterization techniques kinetically relevant reactor cells with good resolution are recently developing, the knowledge gained with magnetic resonance and X-ray and vibrational spectroscopy studies is already huge and the scope of operando methodology with these techniques is recently expanding from studies with small amounts of powdered solids to more industrially relevant catalytic systems. Engineering catalysis implies larger physical domains, and thus all sort of gradients. Space- and time-resolved multi-technique characterization of both the solid and fluid phases involved in heterogeneous catalytic reactions (including temperature data) is key to map processes from different perspectives, which allows taking into account existing heterogeneities at different scales and facing up- and down-scaling for applications ranging from microstructured reactors to industrial-like macroreactors (operating with shaped catalytic bodies and/or in integral regime). This work reviews how operando methodology is evolving toward engineered reaction systems., This work was supported by Spanish Ministry grants CTQ2014-57578-R ‘LT-NOx’ and CTM2017-82335-R ‘RIEN2O’; and Comunidad de Madrid programme 2013/MAE2985 ‘ALCCONES.’
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance of an aliovalent-substituted CoCeOx catalyst from bimetallic MOF for VOC oxidation in air

  • Li, Yuxin
  • Han, Wei
  • Wang, Ruixuan
  • Weng, Lu-Tao
  • Serrano-Lotina, Ana M.
  • Bañares, Miguel A.
  • Wang, Qingyue
  • Yeung, King Lun
The aliovalent-substitution of cobalt into ceria lattice was demonstrated using a bimetallic CoCeBDC MOF to achieve a high degree of atomic level mixing in the CoCeO catalyst. Spectroscopic analyses including X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirmed the successful insertion of cobalt atom with a concomitant increase in defects (i.e., Raman I/I = 0.25) and oxygen vacancies (i.e., XPS O/(O+O) = 0.33) that correlates well with catalytic activity for the oxidations of methanol, acetone, toluene, and o-xylene. The as-prepared CoCeO performed a 50% conversion (T) and 90% conversion (T) in toluene oxidation at 212 °C and 227 °C that are significantly lower than the reference CoO/CeO nanocube catalyst that had T of 261 °C and T of 308 °C, indicating its better catalytic activity. Moreover, CoCeO catalyst completely oxidizes organic compounds to carbon dioxide and water, while reaction over CoO/CeO nanocube catalyst produces significant carbon monoxide., The authors are grateful for the financial support from the National Natural Science Foundation of China / Research Grants Council Joint Research Scheme [N_HKUST626/13] and Research Grants Council - General Research Fund [16307014], Innovation and Technology Fund [ITS/300/18], the Spanish Ministry [CTM2017-82335-R], and Guangzhou Collaborative Innovation Key Program [201704030074]. We also acknowledge the staff from MCPF, AEMF, CBE from HKUST and CSIC-ICP.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ceria and its related materials for VOC catalytic combustion: A review

  • Wang, Qingyue
  • Yeung, King Lun
  • Bañares, Miguel A.
Based on unique oxygen storage capacity (OSC), ceria catalysts are widely investigated for remediation of volatile organic compounds (VOCs) over the recent decade. It is generally accepted that VOC oxidation on ceria is through Mars-van Krevelen mechanism, where lattice oxygen (O) reacts with adsorbed VOC molecule, followed by re-oxidation of reduced ceria by replenishing O from gaseous O. Oxygen vacancy and oxygen mobility are the key factors involved that influence the OSC and consequently modify the catalytic performance. Many strategies have been explored in the literature to optimize the materials. For the formation energy of oxygen vacancies varies with crystal orientation, ceria with specific morphologies (i.e., nanorods with (110) and (100)) perform better than the typical ceria catalysts. Beyond that, transition metal cations (e.g., V, Zr, Cr, Mn, and Cu) can dope or aliovalent substitute into ceria lattice, resulting in more defects and tuning the reactivity. Precious metal nanoparticles (e.g., Au, Pt, Pd, Ru) are known to activate the lattice oxygen at the interface of noble metal and ceria, facilitating the transformation of surface oxygen species and decreasing the light-off temperature. These strategies are also applicable to keep ceria from deactivation when facing chlorinated VOCs (CVOCs) and volatile sulfur compounds (VSCs)., The authors are grateful for the financial support from the Spanish Ministry [CTM2017-82335-R]; the National Natural Science Foundation of China/Research Grant Council Joint Research Scheme [N-HKUST626/13] and Research Grants Council/General Research Fund [16307014]; EURASIACAT and Guangzhou Collaborative Innovation Key Program [201704030074].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bimetallic MnO2-supported catalysts for selective reduction of NO with NH3. Operando IR studies

  • Serrano-Lotina, Ana M.
  • Cruz, Karen
  • Bañares, Miguel A.
  • Daturi, Marco
  • Ávila García, Pedro
Supplementary data to this article can be found online at https://doi.org/10.1016/j.apsusc.2022.155550, [EN] Bimetallic shaped catalysts were prepared by wet equilibrium impregnation. MnO2 was the main component and a second metal oxide (Co, Fe and Ce oxides) was added. The highest catalytic activity in the selective reduction of NOx with NH3 of the Ce-promoted catalyst (88 % of NO was converted at 170 °C) may be related to its capacity to adsorb NOx even in presence of water. It is demonstrated that NO adsorbs and oxidizes on CeOx and MnOx and then reacts with NH3 via a Langmuir-Hinshelwood mechanism. However, in presence of water, the surface of Fe-promoted catalyst during NH3-SCR was only covered by NH3 adsorbed species and NOx conversion was lower (65 % of NO was converted at 170 °C). NOx adsorbed species were not observed, which suggests that the reaction of ammonia with gaseous NOx was much faster than that of nitrites/nitrates formation. Elay-Riedel seems to be the predominant mechanism over this catalyst, Financial support from the Spanish Government (RIEN2O,CTM2017-82335-R), and “Comunidad de Madrid” and European Structural Funds (ACES2030, S2018/EMT-4319) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing the role of oxygen vacancies on N2O catalytic decomposition over CaMn1-xFexO3-δ perovskites

  • Serrano-Lotina, Ana M.
  • Mastronardo, Emanuela
  • Coronado, Juan M.
Catalytic decomposition of N2O using redox perovskites can efficiently mitigate industrial emissions of this molecule. Here, we have selected the CaMn1-xFexO3-δ (CMF) oxides as catalysts to explore the role of oxygen vacancies on N2O decomposition, because for these materials the thermodynamics of oxygen non-stoichiometry is known in detail Perovskites with two levels of Fe-doping, CMF73 (30 % at.) and CMF91 (10 % at.), were prepared and extensively characterized. Higher conversion is obtained over CMF73, which also presents good stability. In the presence of N2O, variation of temperature prompts this perovskite to quickly adjust the value of δ by reversible release/uptake of O2. In parallel, surface vacancies can participate in the breaking of the N-O bond, as a part of a regenerative catalytic cycle yielding N2 and O2. A simple kinetic model shows good correlation between the number of oxygen vacancies, estimated by δ, and the catalytic activity, explaining the better performance of CMF73., Financial support from projects SESPer Marie Sklodowska-Curie grant No 74616, ACES2030 from “Comunidad de Madrid” and European Structural Funds to (P2018/EMT-4319) and Spanish government through the MICINN project CTM2017–82335-R is fully acknowledged. ESR experiments were performed at the Magnetic Resonance Service of the Complutense University of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Operando Investigation of Toluene Oxidation over 1D Pt@CeO2 Derived from Pt Cluster-Containing MOF

  • Wang, Qingyue
  • Li, Yuxin
  • Serrano-Lotina, Ana M.
  • Han, Wei
  • Portela, Raquel
  • Wang, Ruixuan
  • Bañares, Miguel A.
  • Yeung, King Lun
A unique 1D nanostructure of Pt@CeO2-BDC was prepared from Pt@CeBDC MOF. The Pt@CeO2-BDC was rich in oxygen vacancies (i.e., XPS Oβ/(Oα + Oβ) = 39.4%), and on the catalyst, the 2 nm Pt clusters were uniformly deposited on the 1D mesoporous polycrystalline CeO2. Toluene oxidation was conducted in a spectroscopic operando Raman-online FTIR reactor to elucidate the reaction mechanism and establish the structure-activity relationship. The reaction proceeds as follows: (I) adsorption of toluene as benzoate intermediates on Pt@CeO2-BDC at low temperature by reaction with surface peroxide species; (II) reaction activation and ring-opening involving lattice oxygen with a concomitant change in defect densities indicative of surface rearrangement; (III) complete oxidation to CO2 and H2O by lattice oxygen and reoxidation of the reduced ceria with consumption of adsorbed oxygen species. The Pt clusters, which mainly exist as Pt2+ with minor amounts of Pt0 and Pt4+ on the surface, facilitated the adsorption and reaction activation. The Pt-CeO2 interface generates reduced ceria sites forming nearby adsorbed peroxide at low temperature that oxidize toluene into benzoate species by a Langmuir-Hinshelwood mechanism. As the reaction temperature increases, the role of lattice oxygen becomes important, producing CO2 and H2O mainly by the Mars-van Krevelen mechanism., The authors are grateful for the financial support from the National Natural Science Foundation of China/Research Grants Council Joint Research Scheme [N_HKUST626/13] and Research Grants Council - General Research Fund [16307014], Innovation and Technology Fund [ITS/300/18], the Spanish Ministry [CTM2017-82335-R], and Guangzhou Collaborative Innovation Key Program [201704030074]. We also acknowledge the staff from MCPF, AEMF, CBE from HKUST, and CSIC-ICP, especially Dr. Yuan Cai for her technical support, Peer reviewed