Skip to main content

CATALIZADORES AVANZADOS DE BASE BIOMASICA PARA LA SINTESIS DE DIMETIL ETER EN UNA ETAPA

CTQ2015-68654-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RIUMA. Repositorio Institucional de la Universidad de Málaga
Publication Artículo científico (JournalArticle)

Role of different nitrogen functionalities on the electrochemical performance of activated carbons

  • Cordero-Lanzac, Tomás
  • Rosas-Martínez, Juana María
  • García-Mateos, Francisco José
  • Ternero-Hidalgo, Juan José
  • Palomo-Jiménez, José
  • Rodríguez-Mirasol, José
  • Cordero-Alcántara, Tomás
Different oxidation, reduction and thermal methods are used for selectively obtaining each of the most common surface nitrogen groups (almost isolated) on the surface of a phosphorus-containing activated carbon (ACP), and their electrochemical performance are analyzed. Nitro- and amino- containing activated carbons show defined pseudocapacitive peaks, characteristic of redox processes, which can be associated to the formation of hydroxylamino groups (observed by means of XPS). Condensed structures of nitrogen, such as pyridinic and pyrrolic, additionally improve the ionic diffusion on the carbonaceous structure, increasing the specific capacitance of the carbon electrode up to 317 F g-1. The formation of poly(amido-amine) chains on ACP surface leads to an activated carbon with poor textural properties (ABET = 43 m2 g-1) but surprisingly high surface capacitances (ca. 3256 mF m-2) attributed to an enhancement of the carbon conductivity. Some of the activated carbons are submitted to a severe thermal treatment at 900 ºC, yielding carbons with a developed porous texture, stable surface phosphorus groups and an increased proportion of quaternary nitrogen surface species. These activated carbons exhibit a faster development of the electric double layer, due to the more ordered carbon planes and the presence of charged functional groups., Ministerio de Economía y Competividad
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publication Artículo científico (JournalArticle)

ZSM-5-decorated CuO/ZnO/ZrO2 fibers as efficient bifunctional catalysts for the direct synthesis of DME from syngas.

  • Palomo-Jiménez, José
  • Rodríguez-Cano, Miguel Ángel
  • Rodríguez-Mirasol, José
  • Cordero-Alcántara, Tomás
https://openpolicyfinder.jisc.ac.uk/id/publication/11129?from=single_hit, CuO/ZnO/ZrO2-ZSM-5 fibrillar bifunctional catalysts, with a mean diameter of 1.5 μm, were prepared in flexible non-woven mats. The use of electrospinning technique allowed obtaining, in only one step, both a high Cu dispersion on the surface of the ZrO2 fibers and well-dispersed zeolite aggregates, with a mean size of 300 nm, decorating the CuO/ZnO/ZrO2 fiber surfaces. These fibers, without further modifications, were very efficient as catalysts for the direct synthesis of DME from syngas in a packed-bed reactor (low pressure drop and enhanced mass and heat transfer). The catalytic activity was well-correlated with the physicochemical properties of the catalysts. The enhanced interaction between the two active phases involved in the direct syngas-to-DME process gave rise to high CO conversions and selectivity to DME values, even when working with a syngas presenting a low H2/CO ratio, such as that obtained from biomass gasification., Spanish Ministry of Economy and Competitiveness, Spanish Ministry of Sciences Innovation and Universities, European Regional Development Fund (ERDF), Spanish Ministry Education
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publication Artículo científico (JournalArticle)

On the kinetics of methanol dehydration to dimethyl ether on Zr-loaded P-containing mesoporous activated carbon catalyst.

  • Palomo-Jiménez, José
  • Rodríguez-Cano, Miguel Ángel
  • Rodríguez-Mirasol, José
  • Cordero-Alcántara, Tomás
https://openpolicyfinder.jisc.ac.uk/publication/16515, Selective methanol dehydration to DME has been investigated using activated carbon-based catalysts. An activated carbon was prepared by chemical activation of olive stones, a residue of the agri-food industry, with phosphoric acid followed by Zr loading (5% (w/w)). The activation process produced a considerable amount of chemically stable surface phosphorus complexes. The addition of Zr resulted in the formation of zirconium phosphate surface species, as revealed by XPS. TPD and catalytic reaction results determined that the presence of zirconium phosphate species bonded to the carbon surface were responsible for the high steady-state methanol conversion and DME selectivity achieved by this biomass-derived catalyst. A kinetic study for the selective methanol dehydration to DME was carried out on the Zr-loaded P-containing activated carbon catalyst and the corresponding kinetic and thermodynamic parameters were obtained. The reaction seems to proceed through a modified Langmuir-Hinshelwood mechanism (LH2), in which two methanol molecules are subsequently adsorbed on one active site. The competitive adsorption of water on the active sites was also addressed in the proposed mechanism. The activation energy for the DME production was calculated and a value of 70 kJ mol-1 was obtained., Spanish Ministry of Economy and Competitiveness, European Regional Development Fund (ERDF), Spanish Ministry Education
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Kinetic study of SO2 removal over lignin-based activated carbon

  • Rosas, Juana M.
  • Ruiz-Rosas, Ramiro
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
Adsorption of SO2 on an activated carbon obtained by chemical activation of kraft lignin with zinc chloride was studied in a laboratory column. The presence of oxygen and water vapor in the inlet stream increases the SO2 adsorption capacity of the carbon, due to the surface oxidation of the SO2 to SO3 and the subsequent hydration to H2SO4. Desorption of the SO2 chemisorbed at temperatures in the range of 150–300 °C produces carbon gasification, forming oxygen surface groups that decompose mainly as CO at higher temperatures (>−500 °C). The presence of CO2 in the inlet gas decreases the SO2 adsorption capacity of the carbon. However, the presence of NO does not produce any significant change in the adsorption of SO2, at the studied conditions. The breakthrough curves of the SO2 adsorption are predicted adequately by a rigorous mathematical model that takes into account the catalytic oxidation of SO2 by an Eley-Rideal mechanism and the reaction between adsorbed SO3 and water vapor to produce H2SO4, followed by the elution of the adsorbed H2SO4 that releases the active sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Lignin-derived Pt supported carbon (submicron)fiber electrocatalysts for alcohol electro-oxidation

  • García-Mateos, Francisco J.
  • Cordero-Lanzac, Tomás
  • Berenguer Betrián, Raúl
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Lignin fibers, with and without phosphorus, and loaded with platinum have been prepared in a single step by electrospinning of lignin/ethanol/phosphoric acid/platinum acetylacetonate precursor solutions. Thermochemical treatments have been carried out to obtain lignin-based carbon fiber electrocatalysts. The electrospun lignin fibers were thermostabilized in air and carbonized at 900 °C. The effect of phosphorus and platinum content on the porous texture, the surface chemistry and the oxidation/electro-oxidation resistance have been studied. Phosphorus-containing carbon fibers develop a higher surface area (c.a. 1200 m2 g−1), exhibit a lower Pt particle size (2.1 nm) and a better particle distribution than their counterpart without phosphorus (c.a. 750 m2 g−1 of surface area and 9.6 nm Pt particle size). It has been proved that phosphorus improves the oxidation and electro-oxidation resistance of the fibers, avoiding their oxidation during the preparation thermal stages and is responsible of the generation of a microporous material with an unusual wide operational potential window (1.9 V). An important Pt–P synergy has been observed in the oxygen transfer during the oxidation and electro-oxidation of the fibers. The obtained carbon fibers can act directly as electrodes without any binder or conductivity promoter. The fibers with platinum have shown outstanding catalyst performance in the electro-oxidation of methanol and ethanol.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Phosphorus functionalization for the rapid preparation of highly nanoporous submicron-diameter carbon fibers by electrospinning of lignin solutions

  • García-Mateos, Francisco J.
  • Berenguer Betrián, Raúl
  • Valero-Romero, María José
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
This work presents a fast and versatile method to prepare carbon fibers from lignin. It involves the production of submicron-sized phosphorus-functionalized lignin fibers in only one step by electrospinning of lignin/H3PO4 solutions. The phosphorus functionalities enable shortening of the conventional stabilization process from more than 90 h to only 2 h thus avoiding fiber fusion or even stabilizing the lignin fibers in an inert atmosphere. The incorporation of H3PO4 into the initial lignin solution produces more oxidized spun lignin fibers, due to the reaction of phosphoric acid with the dissolved lignin, generating phosphate (and/or polyphosphate) esters throughout the structure of lignin fibers. These phosphate groups seem to be responsible for the production of cross-linking reactions during the stabilization step that are, in this case, very active and effective in increasing the glass transition temperature of the lignin fibers, reducing the time needed for the stabilization step and improving this process. Moreover, they promote the chemical activation of lignin fibers and greatly increase their oxidation resistance, avoiding their complete combustion during carbonization under a low concentration of O2 at temperatures as high as 900 °C. The resulting carbon fibers gather different interesting properties, such as sub-micron diameters (≤1 μm), large surface area (≈2000 m2 g−1), relatively high performance in relation to their mechanical properties for functional applications and a rich variety of uniformly distributed O and P surface functionalities, which make them very attractive for heterogeneous catalysis, adsorption and electrochemical applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Operando Reactor-Cell with Simultaneous Transmission FTIR and Raman Characterization (IRRaman) for the Study of Gas-Phase Reactions with Solid Catalysts

  • Ternero-Hidalgo, Juan J.
  • Guerrero-Perez, M.Olga
  • Rodriguez-Mirasol, José
  • Cordero, Tomás
  • Bañares, Miguel A.
  • Portela, Raquel
  • Bazin, Philippe
  • Clet, Guillaume
  • Daturi, Marco
Raman and transmission FTIR spectroscopic techniques have been coupled in a new homemade reactor-cell designed in a joint CSIC-LCS collaboration. The setup is easily adapted to any FTIR and fiber-coupled Raman spectrometers and gas analysis techniques. It allows for simultaneous operando FTIR and Raman spectroscopic measurement, which provide complementary characterization of adsorbed species, reaction intermediates, and structural properties of the catalyst. This system was validated with the study of vanadium-based catalysts during propane oxydehydrogenation (ODH). The combined use of both spectroscopies with gas analysis techniques to measure the activity contributes to the understanding of propane ODH and the identification of the role of different oxygen species bound to vanadium sites. For example, the simultaneous characterization of the catalyst under the same conditions by IR and Raman confirms that the V═O mode has the same frequency in both spectroscopies and that bridging oxygen sites (V - O - V, V - O - Zr) present higher activity than terminal V═O bonds. These results demonstrate the high potential of the new simultaneous transmission IR-Raman operando rig to correlate the activity and the structure of catalysts, thus assisting the rational design of catalytic processes., Authors acknowledge the FEDER-Region Basse-Normandie (France)-CNRS for a Chaire d’Excellence, which resulted in the implementation of the “IRRaman” rig and a research stay allowing for the performance of these investigations. This work was also supported by the Spanish Ministry of Economy and Competitiveness and FEDER (CTQ2012-36408, CTQ2015-68654-R, and CTM2017-82335-R). J.J.T.H. acknowledges the assistance of the Ministry of Economy and Competitiveness of Spain for the award of a FPI Grant (BES-2013-064425) and the award for performing his stay at ENSICAEN (EEBB-I-16-10749).