Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Activation of electrospun lignin-based carbon fibers and their performance as self-standing supercapacitor electrodes

  • García-Mateos, Francisco J.
  • Ruiz-Rosas, Ramiro
  • Rosas, Juana M.
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The production and activation of self-standing carbon electrodes from electrospun lignin fibers was analyzed in this work. Carbon microfibers were prepared at 900 °C from air-stabilized spun cloths by direct carbonization under inert atmosphere and with diluted O2. The modifications of the porosity and surface chemistry of the carbon fibers was also studied by adding H3PO4 in the lignin solution and using different oxygen partial pressures during activation. The presence of phosphoric acid not only increases the porosity development and the preparation yield, but also enhances the gravimetric capacitance of the electrodes. In addition, the activation in presence of oxygen increases the surface area and the generation of wider micropores. Microporous carbon fibers with surface areas as high as 2340 m2 g−1 were obtained using this method. The direct conformation of carbon fibers into binderless electrodes allows to achieve high-power rate capability supercapacitors. Activation in presence of oxygen can enhance up to 50% the energy storage of supercapacitors without compromising the power of the device (8.4 Wh kg−1 and Pmax of 47 kW kg−1). However, at high activation degrees, no further gain in energy density is observed due to the excessive widening of micropores, and the loss of electrical conductivity that increases the cell resistance, limiting the power capability of the device. The optimal results in terms of energy, power and durability are achieved combining low amounts of H3PO4 and mild activation with O2, confirming that electrospinning of lignin is a promising method for sustainable production of self-standing supercapacitor electrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Phosphorus functionalization for the rapid preparation of highly nanoporous submicron-diameter carbon fibers by electrospinning of lignin solutions

  • García-Mateos, Francisco J.
  • Berenguer Betrián, Raúl
  • Valero-Romero, María José
  • Rodríguez-Mirasol, José
  • Cordero, Tomás
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
This work presents a fast and versatile method to prepare carbon fibers from lignin. It involves the production of submicron-sized phosphorus-functionalized lignin fibers in only one step by electrospinning of lignin/H3PO4 solutions. The phosphorus functionalities enable shortening of the conventional stabilization process from more than 90 h to only 2 h thus avoiding fiber fusion or even stabilizing the lignin fibers in an inert atmosphere. The incorporation of H3PO4 into the initial lignin solution produces more oxidized spun lignin fibers, due to the reaction of phosphoric acid with the dissolved lignin, generating phosphate (and/or polyphosphate) esters throughout the structure of lignin fibers. These phosphate groups seem to be responsible for the production of cross-linking reactions during the stabilization step that are, in this case, very active and effective in increasing the glass transition temperature of the lignin fibers, reducing the time needed for the stabilization step and improving this process. Moreover, they promote the chemical activation of lignin fibers and greatly increase their oxidation resistance, avoiding their complete combustion during carbonization under a low concentration of O2 at temperatures as high as 900 °C. The resulting carbon fibers gather different interesting properties, such as sub-micron diameters (≤1 μm), large surface area (≈2000 m2 g−1), relatively high performance in relation to their mechanical properties for functional applications and a rich variety of uniformly distributed O and P surface functionalities, which make them very attractive for heterogeneous catalysis, adsorption and electrochemical applications.