Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Carbothermally generated copper–molybdenum carbide supported on graphite for the CO2 hydrogenation to methanol

  • Dongil, Ana Belén
  • Conesa, José M.
  • Pastor Pérez, Laura
  • Sepúlveda-Escribano, Antonio
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Pastor Pérez, Laura|||/items/00dee246-452c-4aa3-9a7f-c8063ec5d9a2
The carbothermal synthesis of monometallic and bimetallic molybdenum carbide and copper, supported on high surface area graphite (H), has been studied by in situ XRD, XPS, D2-TPD, TEM/STEM, TG-mass spectrometry, and N2 adsorption. The catalysts were prepared using H2 at 600 °C or 700 °C and tested in the hydrogenation of CO2 to methanol. Molybdenum carbide and oxycarbide phases were obtained, as well as hydride species, at 600 °C on both monometallic MoxC/H and bimetallic CuMoxC/H in a similar proportion. Upon increasing the temperature up to 700 °C, the formation of metallic Mo is favourable. Although this is observed on supported MoxC and CuMoxC, the bimetallic sample is less affected by the formation of the hydride, and molybdenum carbide is also observed upon treatment at 700 °C. With regards to the catalytic performance, supported monometallic copper was not active, but copper increased the activity and selectivity of the molybdenum carbide. The yield of methanol per catalyst's weight increases upon increasing the copper loading, indicating that a cooperation reaction takes place between the smallest Cu particles in contact with the molybdenum phase. The catalysts synthesized at 700 °C are less active and less selective to methanol favouring the reverse water gas shift under the studied conditions. Interestingly, the catalysts are stable under the reaction conditions, and the detected phases by XRD of the spent catalysts suggest that the hydride species favoured transformations involving MoOxCyHz ↔ β-Mo2C.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of the Carbon Support and Conditions on the Carbothermal Synthesis of Cu-Molybdenum Carbide and Its Application on CO2 Hydrogenation to Methanol

  • Dongil, Ana Belén
  • Blanco, Elodie
  • Villora-Picó, Juan José
  • Sepúlveda-Escribano, Antonio
  • Rodríguez-Ramos, Inmaculada
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
The synthesis of methanol by carbon dioxide hydrogenation has been studied using copper-molybdenum carbides supported on high surface area graphite, reduced graphene oxide and carbon nanotubes. The synthesis conditions and the effect of the support were studied. The catalysts were prepared in situ using H2 or He at 600 °C or 700 °C. Both molybdenum carbide and oxycarbide were obtained. A support with less reactive carbon resulted in lower proportion of carbide obtained. The best results were achieved over a 5 wt.% Cu and 10 wt.% Mo on high surface area graphite that reached 96.3% selectivity to methanol.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrogen production by formic acid decomposition over ca promoted Ni/SiO2 Catalysts: effect of the calcium content

  • Faroldi, B.
  • Paviotti, M. A.
  • Camino-Manjarrés, M.
  • González-Carrazán, S.
  • López-Olmos, Cristina
  • Rodríguez-Ramos, Inmaculada
© The Author(s)., Formic acid, a major product of biomass processing, is regarded as a potential liquid carrier for hydrogen storage and delivery. The catalytic dehydrogenation of FA to generate hydrogen using heterogeneous catalysts is of great interest. Ni based catalysts supported on silica were synthesized by incipient wet impregnation. The effect of doping with an alkaline earth metal (calcium) was studied, and the solids were tested in the formic acid decomposition reaction to produce hydrogen. The catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and programmed temperature surface reaction (TPSR). The catalyst doped with 19.3 wt.% of Ca showed 100% conversion of formic acid at 160 °C, with a 92% of selectivity to hydrogen. In addition, all the tested materials were promising for their application, since they showed catalytic behaviors (conversion and selectivity to hydrogen) comparable to those of noble metals reported in the literature., This research was supported by the Spanish Agencia Estatal de Investigación (AEI) under project CTQ-2017-89443-C3-3-R. CONICET Postdoctoral External Scholarship awarded to B. Faroldi is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Upgrading the Properties of Reduced Graphene Oxide and Nitrogen-Doped Reduced Graphene Oxide Produced by Thermal Reduction toward Efficient ORR Electrocatalysts

  • Ramírez-Barria, Carolina S.
  • Fernandes, Diana M.
  • Freire, Cristina
  • Villaro-Abalos, Elvira
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
© 2019 by the authors., N-doped (NrGO) and non-doped (rGO) graphenic materials are prepared by oxidation and further thermal treatment under ammonia and inert atmospheres, respectively, of natural graphites of different particle sizes. An extensive characterization of graphene materials points out that the physical properties of synthesized materials, as well as the nitrogen species introduced, depend on the particle size of the starting graphite, the reduction atmospheres, and the temperature conditions used during the exfoliation treatment. These findings indicate that it is possible to tailor properties of non-doped and N-doped reduced graphene oxide, such as the number of layers, surface area, and nitrogen content, by using a simple strategy based on selecting adequate graphite sizes and convenient experimental conditions during thermal exfoliation. Additionally, the graphenic materials are successfully applied as electrocatalysts for the demanding oxygen reduction reaction (ORR). Nitrogen doping together with the starting graphite of smaller particle size (NrGO325-4) resulted in a more efficient ORR electrocatalyst with more positive onset potentials (Eonset = 0.82 V versus RHE), superior diffusion-limiting current density (jL, 0.26V, 1600rpm = −4.05 mA cm−2), and selectivity to the direct four-electron pathway. Moreover, all NrGOm-4 show high tolerance to methanol poisoning in comparison with the state-of-the-art ORR electrocatalyst Pt/C and good stability., This research was supported by the Spanish Agencia Estatal de Investigación (AEI) under projects CTQ-2017-89443-C3-1-R and CTQ-2017-89443-C3-3-R. C.S.R.B. gratefully acknowledges financial support from Spanish Ministerio de Educacion, Cultura y Deporte, Grant Nº FPU15/01838. D.M.F. also thanks Project UNIRCELL - POCI-01-0145-FEDER-016422 funded by European Structural and Investment Funds (FEEI) through - Programa operacional Competitividade e Internacionalização - COMPETE2020 and by national funds through FCT - Fundação para a Ciência e a Tecnologia, I.P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ru nanoparticles supported on N-doped reduced graphene oxide as valuable catalyst for the selective aerobic oxidation of benzyl alcohol

  • Ramírez-Barria, Carolina S.
  • Isaacs Mark
  • Parlett, Christopher
  • Wilson, Karen
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
[EN] The catalytic performance of a series of Ru-based catalysts was evaluated for the selective aerobic oxidation of benzyl alcohol to benzaldehyde under base-free mild conditions. The effect of metal precursor (RuCl, RuNO(NO) and Ru(CO)) and support on catalyst performance was investigated by comparing undoped (rGO) and N-doped (NrGO) reduced graphene oxide with commercial activated carbon and high surface area graphite supports. The surface chemistry and structure of materials were characterized by nitrogen physisorption (BET), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The average Ru nanoparticle sizes were in the range from 1.4 to 2.4 nm, with the smallest particle sizes obtained on rGO support owing to its highest surface area. Catalysts prepared from RuNO(NO) and Ru(CO) precursors exhibit the highest benzyl alcohol conversion to the corresponding aldehyde, with highest conversions observed when NrGO support is employed. Catalysts prepared from Ru(CO) on NrGO support exhibit the highest activity for benzaldehyde formation, which is over three times that of commercial activated carbon supported Ru catalysts. The differences in catalytic performance are attributed to interactions between the acidic product of the reaction and the basic surface sites of the NrGO support, and modification of the surface hydrophobicity. These factors confer a significant rate enhancement in the selective oxidation of benzyl alcohol over Ru/NrGO compared to Ru/rGO. Ru/NrGO is stable under reaction conditions, however progressive deactivation is observed owing to water accumulation at the active site. Catalysts are easily reactivated via heating, with >90% of the original activity recovered on reuse., CRB gratefully acknowledges financial support from Spanish Ministerio de Educacion, Cultura y Deporte, Grant Nº FPU15/01838. Also the financial support from the Spanish Ministerio de Economía y Competitividad under projects (CTQ2017-89443-C3-1-R and -3-R) is recognized.KW thanks the Royal Society for the award of an Industry Fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of Cu-Ni-Mn-catalysts for the conversion of ethanol to butanol

  • López-Olmos, Cristina
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
[EN] In the present study, the catalytic coupling of ethanol into 1-butanol through the Guerbet reaction was studied in a fixed bed reactor over different catalytic systems based on Cu and/or Ni as a hydrogenating/dehydrogenating components, and manganese oxide incorporating acid/base properties over a carbonaceous support, high surface area graphite (HSAG). The catalysts were prepared by wetness impregnation of the support with the corresponding metal nitrates and the resulting material was then reduced in-situ with hydrogen at 573 K for 1 h before reaction. The catalysts were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), specific surface area, NH temperature-programmed desorption, CO chemisorption, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). From all these techniques it can be deduced that the dimensions of the catalytic ingredients (Cu, Ni, Mn)are in the nanometric scale and homogeneously dispersed on the support. The reactions were performed in a continuous-flow fixed-bed reactor in gas phase with these bifunctional catalysts at 503 K and 50 bar using a stream of helium and ethanol. The bimetallic catalyst 2.5Cu2.5Ni-Mn/HSAG, treated in helium at 723 K prior reduction with hydrogen, exhibited the best catalytic performance in terms of 1-butanol selectivity (39%), presumably due to the synergetic effect of the weak strength acid sites and the strong base sites related to manganese oxide and the Cu-Ni nanoparticles., We acknowledge financial support from the Spanish Government (projects CTQ2017-89443-C3-2-R and CTQ2017-89443-C3-3-R). Also CLO thanks the MECD of Spain for a FPU predoctoral grant FPU16/05131.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tracking the paths for the sucrose transformations over bifunctional Ru-POM/AC catalysts

  • García-Bosch, Nadia
  • Especel, Catherine
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
[EN] The possible pathways of sugars transformation into 1,2-propanediol (PDO)have been studied, using new bifunctional catalysts for this catalytic multistep reaction. The catalysts are based on an acidic active phase (polyoxometalates, POMs)and a metallic function (Ru nanoparticles)supported over activated carbon (AC, S = 1190 m/g). This support was loaded with 15 wt% of polyoxometalate, either phosphotungstic acid (TPA)or tungstosilicic acid (STA), while the amount of loaded ruthenium was close to 2 wt%. The catalytic materials were characterized by X-ray diffraction and electron microscopy techniques (SEM and TEM), while the surface active sites were evaluated using model reaction tests: cyclohexane dehydrogenation for metallic surface sites and isomerization of 3,3-dimethyl-1-butene for acid sites. For different sugars (sucrose, pentoses or hexoses)hydrogenation/hydrogenolysis using these catalysts in batch reactor was studied. The higher PDO selectivity was obtained in ethanol:water media and this study aims to establish the possible ways that sugars follow to achieve this transformation. The best catalytic material, 2%Ru-15%STA supported on AC, yields up to 50% of PDO selectivity when fructose is used as reactant, under moderate reaction conditions (413 K and 30 bar H)., The financial support from the Spanish Ministerio de Economía y Competitividad under projects (CTQ2017-89443-C3-1-R and -3-R) is recognized.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct sulfation of a Zr-based metal-organic framework to attain strong acid catalysts

  • Fernández-Morales, José M.
  • Lozano, Luis A.
  • Castillejos-López, Eva
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
  • Zamaro, Juan M.
[EN] The application of Metal-Organic Frameworks (MOFs) in gas phase heterogeneous catalysis is still not widely spread because of their limited stability under reaction conditions. Obtaining stable acidic MOFs to be used in reactions that demand strong acid sites remains a challenge up to the present time. In this work, it is shown that nanocrystals of Zirconium MOF UiO-66 can be conveniently and easily functionalized through a simple one-pot synthetic approach, i.e. the direct treatment of UiO-66 with ammonium sulfate followed by an adequate thermal treatment, giving rise to a highly acidic and thermally stable material (named as S-UiO-66). This material can act as catalyst in the gas phase isobutene dimerization demonstrating high catalytic activity at moderate temperatures while maintaining the structural integrity of the MOF after several catalytic evaluations and/or after reuse cycles. The S-UiO-66 material represents a novel alternative in the search of robust MOF-based catalysts to be applied in gas phase heterogeneous catalytic reactions that demand strong acid sites., We acknowledge the financial support from the Spanish Government (projects CTQ2017-89443-C3-1-R and CTQ2017-89443-C3-3-R). Juan M. Zamaro thanks CONICET of Argentina for the support given to carry out a research stay at ICP-CSIC, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication

Comparative Study of Different Acidic Surface Structures in Solid Catalysts Applied for the Isobutene Dimerization Reaction

  • Fernández-Morales, José M.
  • Castillejos-López, Eva
  • Asedegbega-Nieto, Esther
  • Dongil, Ana Belén
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
Dimerization of isobutene (IBE) to C8s olefins was evaluated over a range of solid acid catalysts of diverse nature, in a fixed bed reactor working in a continuous mode. All catalytic materials were studied in the title reaction performed between 50–250 C, being the reaction feed a mixture of IBE/helium (4:1 molar ratio). In all materials, both conversion and selectivity increased with increasing reaction temperature and at 180 C the best performance was recorded. Herein, we used thermogravimetry analysis (TGA) and temperature programmed desorption of adsorbed ammonia (NH3-TPD) for catalysts characterization. We place emphasis on the nature of acid sites that a ect the catalytic performance. High selectivity to C8s was achieved with all catalysts. Nicely, the catalyst with higher loading of Brønsted sites displayed brilliant catalytic performance in the course of the reaction (high IBE conversion). However, optimum selectivity towards C8 compounds led to low catalyst stability, this being attributed to the combined e ect between the nature of acidic sites and structural characteristics of the catalytic materials used. Therefore, this study would foment more research in the optimization of the activity and the selectivity for IBE dimerization reactions., This research received external funding from the Spanish Government (CTQ2017-89443-C3-1-R and -3-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of N-doping and carbon nanostructures on NiCu particles for hydrogen production from formic acid

  • Carrales-Alvarado, Damarys H.
  • López-Olmos, Cristina
  • Dongil, Ana Belén
  • Kubacka, Anna
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
[EN] A series of NiCu based catalysts were prepared using different carbon nanostructure as support and loading 2.5 wt% of each metal. The studied nanocarbon materials were: reduced graphene oxide (rGO), N-doped reduced graphene oxide (NrGO), high surface area graphite (HSAG), single and multiwalled carbon nanotubes (SWCNT and MWCNT), N-doped carbon nanotubes (NCNT), spheres of xerogel carbons (SXC) and N-doped SXC (NSXC). The effect of N-doping, electronic properties and morphology of the carbon nanostructures on the metallic particle size was studied as well as their capacity to produce high purity hydrogen from formic acid decomposition at low temperature. The NiCu based catalysts tested are highly selective to H (98−94 % at conversions above 95 %). The site time yield (STY) of the catalysts follows the order: NCNT > SXC > SWCNT∼HSAG∼rGO>rGO>MWCNT∼NSXC > NrGO>NrGO, indicating that N-doped catalysts are less active, except in the case of NCNT which is ascribed to the N-pyrrolic heteroatoms of this material., This work was supported by the Spanish Agencia Estatal de Investigación (AEI) and EU (FEDER) (projects CTQ2017-89443-C3-1-R and CTQ2017-89443-C3-3-R). ABD acknowledges financial support from Fundación General CSIC (ComFuturo)., Supplementary material related to this article can be found, in the online version, at doi:https://doi.org/10.1016/j.apcatb.2021.120604, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable selectivity of Ni catalysts in the hydrogenation reaction of 5-hydroxymethylfurfural in aqueous media: Role of the carbon supports

  • Morales, María Del Puerto
  • Conesa, José María
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
[EN] In addition to the nature of the solvent, the intrinsic metal properties and degree of dispersion, the selective hydrogenation of 5-hydroxymethylfurfural (HMF) has been reported to be greatly affected by the nature of the support. In this work, four Ni catalysts were prepared starting from different carbonaceous supports ─with diverse graphitic and porous structure─ and comparatively evaluated in the hydrogenation reaction of HMF. The reaction was conducted in a batch stirred reactor under 30 bar H pressure at 60 °C in aqueous media. Ni supported on a commercial silica and Raney Ni were also tested for reference purposes. We found that carbon supports limit in some extent the reactivity of Ni towards C[dbnd]C hydrogenation, offering higher selectivity to the carbonyl hydrogenated compound, 2,5-di-hydroxymethylfuran (DHMF), in detrimental to the total hydrogenated derivative, 2,5-di-hydroxymethyl-tetrahydrofuran (DHMTHF). However, the latter was the major product over Raney Ni and Ni/SiO. The unusual catalytic performance of our Ni/carbon catalysts was related to the composition, structural and surface properties. Among all tested Ni/carbon catalysts, Ni over the commercial high surface area graphite (HSAG) exhibited the best catalytic behaviour in terms of DHMF selectivity (90%) and intrinsic catalytic activity. Furthermore, Ni/HSAG displayed satisfactory stability after three consecutive runs., Spanish Agencia Estatal de Investigacion (AEI), Fondo Europeo de Desarrollo Regional (FEDER) and UE (projects CTQ2017-89443-C3-1-R and CTQ2017-89443-C3-3-R). MVM is also grateful for a postdoctoral fellowship FJC2018-038577-I from the Spanish MCIU and for a postdoctoral grant from UNED, Supplementary data to this article can be found online at https://doi.org/10.1016/j.carbon.2021.06.007
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative study of Cu, Ag and Ag-Cu catalysts over graphite in the ethanol dehydrogenation reaction: Catalytic activity, deactivation and regeneration

  • Conesa, José María
  • Morales, M. V.
  • López-Olmos, Cristina
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
[EN] The physicochemical and catalytic properties of bimetallic AgCu catalysts and their monometallic counterparts supported on a high surface area graphite have been comparatively evaluated in the ethanol dehydrogenation reaction, performed in a continuous-flow reactor. While Cu was incorporated by the incipient wetness impregnation technique, for Ag catalysts two synthesis procedures were explored: incipient wetness impregnation and adsorption of Tollens’ reagent. The catalysts prepared by wetness impregnation exhibited higher metal dispersion, being improved for the bimetallic catalysts in comparison with the monometallic counterparts. The results obtained in the catalytic tests revealed that Cu catalysts is nearly two orders of magnitude more active than Ag catalyst in the dehydrogenation reaction of ethanol on either a turnover frequency or a weight basis, but at the same time both catalysts were 100% selective to acetaldehyde. Whereas selectivity was not affected by the bimetallic composition, there was a substantial decrease in the reaction rate among the bimetallic catalysts as the Cu/Ag ratio diminished, due to blockage of copper surface active sites by silver. Both silver and copper, and the bimetallic catalysts, suffered from deactivation at 523 K, caused by blocking of active sites by adsorbed hydrocarbons on the catalyst surface (fouling). Carbonaceous deposits were removed through a thermal treatment under H flow, which allowed the total recovery of the initial catalytic activity., Spanish Government (projects CTQ2014-52956-C3-2-R and CTQ2017-89443-C3-3-R). MVM gratefully acknowledges UNED for a postdoctoral year grant., Peer reviewed