Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Kinetic study of a phenolic-novolac resin curing process by rheological and DSC analysis

  • Domínguez Toribio, Juan Carlos
  • Alonso Rubio, María Virginia
  • Oliet Pala, María Mercedes
  • Rodríguez Somolinos, Francisco
  • Rojo Recio, Ester
Rheological isothermal curing runs of a novolac resin were performed in order to study its chemorheological behavior. In addition, DSC tests were carried out for the partially cured novolac resin to determine the curing degree reached at the end of each isothermal run. The Arrhenius and Kiuna empirical models were applied to establish the curing kinetic parameters of a novolac resin. The material curing process had an activation energy of 195.0kJ/mol using the Arrhenius rheokinetic model. The activation energy obtained for the resin curing was 103.5kJ/mol when the Kiuna model was applied. The profile of the resin's curing degree for all isothermal tests was obtained from rheological parameters: complex modulus (G*), elastic modulus (G′) and torque (Γ). Torque was the most suitable rheological variable of the resin for evaluating changes in the degree of cure during the curing process of the novolac resin. The Kamal and Markovic kinetic models were proposed to model the resin's curing behavior. Kamal's model was suggested as the best approach to predict the change in the mechanical degree of conversion during the material curing process.
Docta Complutense
Publication Artículo científico (JournalArticle)

Chemorheological study of the curing kinetics of a phenolic resol resin gelled

  • Domínguez Toribio, Juan Carlos
  • Alonso Rubio, María Virginia
  • Oliet Pala, María Mercedes
  • Rodríguez Somolinos, Francisco
The changes in the resin viscosity, conductivity, mass, and enthalpy during curing reactions have been studied to obtain kinetic parameters that allow modeling of the resin behavior throughout its industrial application. In this work, isothermal rheological tests of a phenolic resol resin were performed in order to study its complex viscosity during crosslinking reactions. Samples were prepared by a precuring treatment in a heated plate press to reach gel point of the resin. Rheological analyses of resol resin curing were carried out at five different temperatures (80–100°C), and the kinetic models of Arrhenius and Kiuna were applied. The resol resin curing presented an activation energy of 72.1kJ/mol according to the Arrhenius model. The Kiuna model was proposed to fit the non-linear evolution of the resin’s complex viscosity at the highest temperatures. This kinetic model was suitable for predicting the changes in the complex viscosity of the resol resin after its gelation, and the process activation energy obtained for the second order polynomial applied in this model was 88.1kJ/mol. In addition, the profile for the degree of curing of resol resin was determined from measurements of the material’s elastic modulus.