Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Kinetic study of a phenolic-novolac resin curing process by rheological and DSC analysis

  • Domínguez Toribio, Juan Carlos
  • Alonso Rubio, María Virginia
  • Oliet Pala, María Mercedes
  • Rodríguez Somolinos, Francisco
  • Rojo Recio, Ester
Rheological isothermal curing runs of a novolac resin were performed in order to study its chemorheological behavior. In addition, DSC tests were carried out for the partially cured novolac resin to determine the curing degree reached at the end of each isothermal run. The Arrhenius and Kiuna empirical models were applied to establish the curing kinetic parameters of a novolac resin. The material curing process had an activation energy of 195.0kJ/mol using the Arrhenius rheokinetic model. The activation energy obtained for the resin curing was 103.5kJ/mol when the Kiuna model was applied. The profile of the resin's curing degree for all isothermal tests was obtained from rheological parameters: complex modulus (G*), elastic modulus (G′) and torque (Γ). Torque was the most suitable rheological variable of the resin for evaluating changes in the degree of cure during the curing process of the novolac resin. The Kamal and Markovic kinetic models were proposed to model the resin's curing behavior. Kamal's model was suggested as the best approach to predict the change in the mechanical degree of conversion during the material curing process.
Docta Complutense
Publication Artículo científico (JournalArticle)

Chemorheological analysis of a gelled resol resin curing under non-isothermal conditions by shear strain

  • Domínguez Toribio, Juan Carlos
  • Alonso Rubio, María Virginia
  • Oliet Pala, María Mercedes
  • Rodríguez Somolinos, Francisco
  • Rojo Recio, Ester
The chemorheological behavior of curing of a resol resin was analyzed under non-isothermal conditions beyond the gelation point. Two heating ramps (0.5 and 1°C/min) from 0 to 100°C were performed. The rheological measurements of the resin were performed using oscillatory shear strain. The obtained profiles for the resin’s complex viscosity were applied, after treatment by two calculation methods, to the four- and six-parameter Arrhenius models. These models allow one to establish the viscous flow region of the resin and the kinetic parameters of the material’s curing process. The six-parameter Arrhenius model was selected as the best method for modeling of the resin’s rheological behavior during its curing process. The viscous-flow activation energies determined for the gelled resol resin curing were 67.1 and 58.3kJ/mol for the 0.5 and 1°C/min heating rates, respectively. The activation energies of the resin curing process were 41.7 and 67.0kJ/mol for each temperature ramp.
Docta Complutense
Publication Artículo científico (JournalArticle)

Rheokinetic of a Gelled Resol Resin Curing by Dynamic-Temperature Rheometry based on Rectangular Torsion Strain

  • Domínguez Toribio, Juan Carlos
  • Oliet Pala, María Mercedes
  • Alonso Rubio, María Virginia
  • Rodríguez Somolinos, Francisco
  • Rojo Recio, Ester
The rheological behavior of a phenolic resol resin during its curing process was studied through a rheological dynamic-temperature analysis. Two heating ramps from 0 to 120 C (1 C/min) and from 0 to 150 C (5 C/min) were performed. The resin’s complex viscosity data were obtained by applying a rectangular torsion strain. The overall change of complex viscosity with temperature was due to a combination of thermal softening, described by the Andrade equation, and the resin cross-linking process. The four- and six-parameter Arrhenius rheokinetic model was applied to the profiles obtained for the resin’s complex viscosity, and the viscous flow and activation energies of curing kinetics were established. Two calculation methods are proposed to obtain the flow and curing parameters of the material. The six-parameter Arrhenius model was more suitable for predicting changes in the resin’s complex viscosity, obtaining an activation energy of 38.0 kJ/mol for the resol resin curing process.
Docta Complutense
Publication Artículo científico (JournalArticle)

Chemorheological study of the curing kinetics of a phenolic resol resin gelled

  • Domínguez Toribio, Juan Carlos
  • Alonso Rubio, María Virginia
  • Oliet Pala, María Mercedes
  • Rodríguez Somolinos, Francisco
The changes in the resin viscosity, conductivity, mass, and enthalpy during curing reactions have been studied to obtain kinetic parameters that allow modeling of the resin behavior throughout its industrial application. In this work, isothermal rheological tests of a phenolic resol resin were performed in order to study its complex viscosity during crosslinking reactions. Samples were prepared by a precuring treatment in a heated plate press to reach gel point of the resin. Rheological analyses of resol resin curing were carried out at five different temperatures (80–100°C), and the kinetic models of Arrhenius and Kiuna were applied. The resol resin curing presented an activation energy of 72.1kJ/mol according to the Arrhenius model. The Kiuna model was proposed to fit the non-linear evolution of the resin’s complex viscosity at the highest temperatures. This kinetic model was suitable for predicting the changes in the complex viscosity of the resol resin after its gelation, and the process activation energy obtained for the second order polynomial applied in this model was 88.1kJ/mol. In addition, the profile for the degree of curing of resol resin was determined from measurements of the material’s elastic modulus.
Docta Complutense
Publication Artículo científico (JournalArticle)

Isothermal rheokinetic study of a precured resol resin beyond gelation by torsion

  • Domínguez Toribio, Juan Carlos
  • Oliet Pala, María Mercedes
  • Alonso Rubio, María Virginia
  • Rodríguez Somolinos, Francisco
  • Rojo Recio, Ester
The rheokinetics of the curing process of a resol resin was studied through isothermal analysis. The resin was subjected to a curing pretreatment until gelation was reached. Rectangular torsion was chosen as the appropriate strain form to carry out the study of the resin's curing kinetics, because the viscoelastic behavior of the material was closer to an ideal solid than to a Newtonian fluid. Seven operating temperatures were selected for analysis (80–110°C). The Arrhenius and Kiuna rheokinetic models were applied to the resin's complex viscosity (η*) evolution during the crosslinking of polymer. The resol resin had curing activation energies of 62.6 and 65.8 kJ/mol when the Arrhenius model was applied in four- and six-parameter forms, respectively. The Kiuna model was proposed to fit the nonlinear viscosity region found at the highest temperatures. This model was suitable to predict changes in the resin's complex viscosity, obtaining a curing activation energy of 69.5 kJ/mol for the resin. In addition, the evolution of the degree of mechanical curing was obtained from the elastic modulus, rather than from the more common DSC technique. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012