Skip to main content

SISTEMAS BIOELECTROQUIMICOS PARA EL TRATAMIENTO DE AGUAS: DE LA TRANSFERENCIA ELECTRONICA EXTRACELULAR A LA APLICACION BIOTECNOLOGICA

CTQ2011-23632

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microbiome characterization of MFCs used for the treatment of swine manure

  • Vilajeliu Pons, Anna
  • Puig Broch, Sebastià
  • Pous Rodríguez, Narcís
  • Salcedo Dávila, Inmaculada
  • Bañeras Vives, Lluís
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Conventional swine manure treatment is performed by anaerobic digestion, but nitrogen is not treated. Microbial Fuel Cells (MFCs) allow organic matter and nitrogen removal with concomitant electricity production. MFC microbiomes treating industrial wastewaters as swine manure have not been characterized. In this study, a multidisciplinary approach allowed microbiome relation with nutrient removal capacity and electricity production. Two different MFC configurations (C-1 and C-2) were used to treat swine manure. In C-1, the nitrification and denitrification processes took place in different compartments, while in C-2, simultaneous nitrification-denitrification occurred in the cathode. Clostridium disporicum and Geobacter sulfurreducens were identified in the anode compartments of both systems. C. disporicum was related to the degradation of complex organic matter compounds and G. sulfurreducens to electricity production. Different nitrifying bacteria populations were identified in both systems because of the different operational conditions. The highest microbial diversity was detected in cathode compartments of both configurations, including members of Bacteroidetes, Chloroflexiaceae and Proteobacteria. These communities allowed similar removal rates of organic matter (2.02-2.09kg CODm-3d-1) and nitrogen (0.11-0.16kgNm-3d-1) in both systems. However, they differed in the generation of electric energy (20 and 2mWm-3 in C-1 and C-2, respectively), This research was financially supported by the Company Abengoa Water within the TEcoAgua project (CEN-20091028), the Spanish Government (CTQ2011-23632) and the Catalan Government (2014 FI-B 00093 and 2012 FI-B 00941)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Anaerobic arsenite oxidation with an electrode serving as the sole electron acceptor: A novel approach to the bioremediation of arsenic-polluted groundwater

  • Pous Rodríguez, Narcís
  • Casentini, Barbara
  • Rossetti, Simona
  • Fazi, Stefano
  • Puig Broch, Sebastià
  • Aulenta, Federico
Arsenic contamination of soil and groundwater is a serious problem worldwide. Here we show that anaerobic oxidation of As(III) to As(V), a form which is more extensively and stably adsorbed onto metal-oxides, can be achieved by using a polarized (+497 mV vs. SHE) graphite anode serving as terminal electron acceptor in the microbial metabolism. The characterization of the microbial populations at the electrode, by using in situ detection methods, revealed the predominance of gammaproteobacteria. In principle, the proposed bioelectrochemical oxidation process would make it possible to provide As(III)-oxidizing microorganisms with a virtually unlimited, low-cost and low-maintenance electron acceptor as well as with a physical support for microbial attachment, This work was supported by MIUR PRIN 2010-2011 project (grant agreement No 2010JBNLJ7-002). The authors thank the Advanced Centre for Microscopy "P. Albertano" of University of Rome "Tor Vergata" for CLSM analyses. Narcis Pous and Sebastia Puig were supported by a project grant from the Catalan Government (2012 FI-B 00941) and the Spanish Government (CTQ2011-23632). Narcis Pous was also supported by a COST Action ES1202 in the context of Water 2020 (COST-STSM-ECOST-STSM-ES1202-011013-035423)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Assessment of biotic and abiotic graphite cathodes for hydrogen production in microbial electrolysis cells

  • Batlle Vilanova, Pau
  • Puig Broch, Sebastià
  • González Olmos, Rafael
  • Vilajeliu Pons, Anna
  • Bañeras Vives, Lluís
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Hydrogen represents a promising clean fuel for future applications. The biocathode of a two-chambered microbial electrolysis cell (biotic MEC) was studied and compared with an abiotic cathode (abiotic MEC) in order to assess the influence of naturally selected microorganisms for hydrogen production in a wide range of cathode potentials (from -400 to -1800 mV vs SHE). Hydrogen production in both MECs increased when cathode potential was decreased. Microorganisms present in the biotic MEC were identified as Hoeflea sp. and Aquiflexum sp. Supplied energy was utilized more efficiently in the biotic MEC than in the abiotic, obtaining higher hydrogen production respect to energy consumption. At -1000 mV biotic MEC produced 0.89 ± 0.10 m3 H2 d-1 m-3NCC (Net Cathodic Compartment) at a minimum operational cost of 3.2 USD kg-1 H2. This cost is lower than the estimated market value for hydrogen (6 USD kg-1 H 2), This research was financially supported by the Spanish Government (CTQ 2011-23632, CTQ 2011-24114)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Cathode potential and anode electron donor evaluation for a suitable treatment of nitrate-contaminated groundwater in bioelectrochemical systems

  • Pous Rodríguez, Narcís
  • Puig Broch, Sebastià
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Several regions around the world present high levels of nitrate in groundwater. Due to its toxicity, nitrate must be removed before the groundwater is used as drinking-water. This study assessed how a denitrifying bioelectrochemical system could be operated to treat nitrate-polluted groundwater. It evaluated the cathode potential (from +597 to -703mV vs SHE) and the anode electron donor (acetate and water). Similar trends were found regardless of the anode electron donor. The nitrate removal rate increased from 1.05 to 5.44mgN-NO3 -LNCC -1h-1 when the cathode potential was lowered from +597 to -403mV vs SHE, where it stabilized. The nitrate reduction end-products (nitrite, nitrous oxide and dinitrogen gas) also changed with the different potentials of the cathode electrode. The World Health Organization nitrates and nitrites standards for drinking-water were reached at cathode potentials between -103 and -203mV vs SHE. The highest rate of nitrate conversion to N2 (2.59mgN-NO3 -LNCC -1h-1, 93.9%) occurred at -123mV using water as anode electron donor, with an estimated operational cost similar to conventional technologies (0.68·10-2kWhgN-NO3-removed-1). The long-term stability of proposed operation was demonstrated during 96days, and the rate of nitrate conversion to N2 even increased to 4.09mgN-NO3 -LNCC -1h-1. A carbon-free operation for a bioelectrochemical system has been developed to treat nitrate-polluted groundwater at a competitive cost, This research was financially supported by the Spanish Government (CTQ2011-23632, CONSOLIDERCSD2007-00055) and the Catalan Government (2014-SGR-1168). Narcis Pous was supported by a project grant from the Catalan Government (2012 FI-B 00941)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

In situ groundwater and sediment bioremediation: Barriers and perspectives at European contaminated sites

  • Majone, Mauro
  • Verdini, Roberta
  • Aulenta, Federico
  • Rossetti, Simona
  • Tandoi, Valter
  • Kalogerakis, Nicolas
  • Agathos, Spiros
  • Puig Broch, Sebastià
  • Zanaroli, Giulio
  • Fava, Fabio
This paper contains a critical examination of the current application of environmental biotechnologies in the field of bioremediation of contaminated groundwater and sediments. Based on analysis of conventional technologies applied in several European Countries and in the US, scientific, technical and administrative barriers and constraints which still need to be overcome for an improved exploitation of bioremediation are discussed. From this general survey, it is evident that in situ bioremediation is a highly promising and cost-effective technology for remediation of contaminated soil, groundwater and sediments. The wide metabolic diversity of microorganisms makes it applicable to an ever-increasing number of contaminants and contamination scenarios. On the other hand, in situ bioremediation is highly knowledge-intensive and its application requires a thorough understanding of the geochemistry, hydrogeology, microbiology and ecology of contaminated soils, groundwater and sediments, under both natural and engineered conditions. Hence, its potential still remains partially unexploited, largely because of a lack of general consensus and public concerns regarding the lack of effectiveness and control, poor reliability, and possible occurrence of side effects, for example accumulation of toxic metabolites and pathogens. Basic, applied and pre-normative research are all needed to overcome these barriers and make in situ bioremediation more reliable, robust and acceptable to the public, as well as economically more competitive. Research efforts should not be restricted to a deeper understanding of relevant microbial reactions, but also include their interactions with the large array of other relevant phenomena, as a function of the truly variable site-specific conditions. There is a need for a further development and application of advanced biomolecular tools for site investigation, as well as of advanced metabolic and kinetic modelling tools. These would allow a quicker evaluation of the bioremediation potential of a site, and in turn a preliminary assessment of the technical feasibility of the chosen bioprocess which could replace or at least reduce the need for time-consuming and expensive field tests. At the same time, field tests will probably remain unavoidable for a detailed design of full scale remedial actions and the above reported tools will in any event be useful for a better design and a more reliable operation, MM, VT, SR, FA and RV acknowledge the European Commission within the Seventh Framework Programme under Grant Agreement No. 265946 (Minotaurus Project, www.minotaurus-project.eu). SP acknowledges the financial support of the Spanish Government (CTQ2011-23632, CONSOLIDERCSD2007-00055)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Impact of formate on the growth and productivity of Clostridium ljungdahlii PETC and Clostridium carboxidivorans P7 grown on syngas

  • Ramió Pujol, Sara
  • Ganigué Pagès, Ramon
  • Bañeras Vives, Lluís
  • Colprim Galceran, Jesús
The current energy model based on fossil fuels is coming to an end due to the increase in global energy demand. Biofuels such as ethanol and butanol can be produced through the syngas fermentation by acetogenic bacteria. The present work hypothesizes that formate addition would positively impact kinetic parameters for growth and alcohol production in Clostridium ljungdahlii PETC and Clostridium carboxidivorans P7 by diminishing the need for reducing equivalents. Fermentation experiments were conducted using completely anaerobic batch cultures at different pH values and formate concentrations. PETC cultures were more tolerant to formate concentrations than P7, specially at pH 5.0 and 6.0. Complete growth inhibition of PETC occurred at sodium formate concentrations of 30.0 mM; however, no differences in growth rates were observed at pH 7.0 for the two strains. Incubation at formate concentrations lower than 2.0 mM resulted in increased growth rates for both strains. The most recognizable effects of formate addition on the fermentation products were the increase in the total carbon fixed into acids and alcohols at pH 5.0 and pH 6.0, as well as, a higher ethanol to total products ratio at pH 7.0. Taken all together, these results show the ability of acetogens to use formate diminishing the energy demand for growth, and enhancing strain productivity, The authors thank the Autonomous Government of Catalonia (Generalitat de Catalunya) (2013 FI-DGR) and the Spanish Ministry of Science and Innovation (Best-Energy, CTQ2011-23632, CTM2013-43454-R) for their financial support in this study. LEQUIA and IEA have been recognized as consolidated research groups by the Catalan Government (2014-SGR-1168 and 2014-SGR-2016). RG gratefully acknowledges support from Beatriu de Pinos fellowship (BP-2011-B) and FP7 Marie Curie Career Integration Grants (PCIG13-GA-2013-618593)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Low Fermentation pH Is a Trigger to Alcohol Production, but a Killer to Chain Elongation

  • Ganigué Pagès, Ramon
  • Sánchez Paredes, Patricia
  • Bañeras Vives, Lluís
  • Colprim Galceran, Jesús
Gasification of organic wastes coupled to syngas fermentation allows the recovery of carbon in the form of commodity chemicals, such as carboxylates and biofuels. Acetogenic bacteria ferment syngas to mainly two-carbon compounds, although a few strains can also synthesize four-, and six-carbon molecules. In general, longer carbon chain products have a higher biotechnological (and commercial) value due to their higher energy content and their lower water solubility. However, de-novo synthesis of medium-chain products from syngas is quite uncommon in acetogenic bacteria. An alternative to de-novo synthesis is bioproduction of short-chain products (C2 and C4), and their subsequent elongation to C4, C6, or C8 through reversed β-oxidation metabolism. This two-step synergistic approach has been successfully applied for the production of up to C8 compounds, although the accumulation of alcohols in these mixed cultures remained below detection limits. The present work investigates the production of higher alcohols from syngas by open mixed cultures (OMC). A syngas-fermenting community was enriched from sludge of an anaerobic digester for a period of 109 days in a lab-scale reactor. At the end of this period, stable production of ethanol and butanol was obtained. C6 compounds were only transiently produced at the beginning of the enrichment phase, during which Clostridium kluyveri, a bacterium able to carry out carbon chain elongation, was detected in the community. Further experiments showed pH as a critical parameter to maintain chain elongation activity in the co-culture. Production of C6 compounds was recovered by preventing fermentation pH to decrease below pH 4.5–5. Finally, experiments showed maximal production of C6 compounds (0.8 g/L) and alcohols (1.7 g/L of ethanol, 1.1 g/L of butanol, and 0.6 g/L of hexanol) at pH 4.8. In conclusion, low fermentation pH is critical for the production of alcohols, although detrimental to C. kluyveri. Fine control of fermentation pH to final values around 4.8 could allow sustained production of higher alcohols, The authors would like to thank the Spanish Ministry (BestEnergy, CTQ2011-23632 and Bescarbox, CTM2013-43454-R for its financial support in this study. LEQUIA and EcoAqua have been recognized as consolidated research groups by the Catalan Government (2014-SGR-1168 and 2014-SGR-0484). RG gratefully acknowledges support from Ghent University BOF postdoctoral fellowship (BOF15/PDO/068)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Biocatalysed sulphate removal in a BES cathode

  • Coma Bech, Marta
  • Puig Broch, Sebastià
  • Pous Rodríguez, Narcís
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Sulphate reduction in a biological cathode and physically separated from biological organic matter oxidation has been studied in this paper. The bioelectrochemical system was operated as microbial fuel cell (for bioelectricity production) to microbial electrolysis cell (with applied voltage). Sulphate reduction was not observed without applied voltage and only resulted when the cathodic potential was poised at -0.26 V vs. SHE, with a minimum energy requirement of 0.7 V, while maximum removal occurred at 1.4 V applied. The reduction of sulphate led to sulphide production, which was entrapped in the ionic form thanks to the high biocathode pH (i.e. pH of 10) obtained during the process, This research was financially supported by the Spanish Government (CSD2007-00055, CTQ2011-23632 and IPT-2011-1073-310000)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Continuous acetate production through microbial electrosynthesis from CO2 with microbial mixed culture

  • Batlle Vilanova, Pau
  • Puig Broch, Sebastià
  • González Olmos, Rafael
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Microbial electrosynthesis represents a promising approach for renewable energy storage in which chemically stable compounds are produced using CO2 as feedstock. This report describes the continuous production of acetate through microbial electrosynthesis from CO2 and assesses how the production rates could be increased. RESULTS: A continuous acetate production rate of 0.98mmol C LNCC-1 d-1 was obtained using CO2 as feedstock and with pH control around 5.8. These conditions increased substrate availability and favoured microbial electrosynthesis. Cyclic voltammograms demonstrated the electroautotrophic activity on the biocathode surface, which increased with pH control and caused current demand and acetate production rate to rise exponentially. CONCLUSION: pH decrease was shown to be an effective strategy to increase substrate availability and enhance microbial electrosynthesis. By making microbial electrosynthesis a feasible technology, CO2 could become an alternative feedstock for the carboxylate platform. © 2015 Society of Chemical Industry, This research was supported financially by the Spanish Government (CTQ 2011–23632, CTQ 2011–24114)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Monitoring and engineering reactor microbiomes of denitrifying bioelectrochemical systems

  • Pous Rodríguez, Narcís
  • Koch, Christin
  • Vilà-Rovira, Albert
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
  • Muehlenberg, Jana
  • Mueller, Simone
  • Harnisch, Falk
  • Puig Broch, Sebastià
Denitrifying bioelectrochemical systems (d-BES) are a promising technology for nitrate removal from wastewaters. Microbial community monitoring is required to pave the way to application. In this study, for the first time flow cytometry combined with molecular biology techniques is exploited to monitor and determine the structure-function relationship of the microbiome of a denitrifying biocathode. Stable cathode performance at poised potential (-0.32 V vs. Ag/AgCl) was monitored, and different stress-tests were applied (reactor leakage, nitrate concentration, buffer capacity). Stress-tests shifted the reactor microbiome and performance. The monitoring campaign covered a wide range of nitrate consumption rates (from 15 to 157 mg N L-NCC(-1) d(-1)), current densities (from 0 to 25 mA L-NCC(-1)) and denitrification intermediates (nitrite and nitrous oxide consumption rates varied from 0 to 56 mg N L-NCC(-1) d(-1)). The reactor microbiome (composed of 21 subcommunities) was characterized and its structure-function relationship was revealed. A key role for Thiobacillus sp. in the bioelectrochemical reduction of nitrate was suggested, while a wider number of subcommunities were involved in NO2- and N2O reduction. It was demonstrated that different bacteria catalyze each denitrification step in a biocathode. This study contributed significantly to understanding denitrifying biocathodes, paving the way for their knowledge-driven engineering, This work was supported by the Spanish Government (CTQ2011-23632, CTQ2014-SGR-1168) and the Helmholtz-Association within the Research Programme Terrestrial Environment. F.H. acknowledges support by the BMBF (Research Award "Next generation biotechnological processes - Biotechnology 2020+") and the Helmholtz-Association (Young Investigators Group). N.P. was supported by the Catalan Government (2012FI-B00941) and the University of Girona (MOB2014-ref22)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microbial electrosynthesis of butyrate from carbon dioxide

  • Ganigué Pagès, Ramon
  • Puig Broch, Sebastià
  • Batlle Vilanova, Pau
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
This work proves for the first time the bioelectrochemical production of butyrate from CO2 as a sole carbon source. The highest concentration of butyrate achieved was 20.2 mMC, with a maximum butyrate production rate of 1.82 mMC d(-1). The electrochemical characterisation demonstrated that the CO2 reduction to butyrate was hydrogen driven. Production of ethanol and butanol was also observed opening up the potential for biofuel production, The authors would like to thank the Spanish Ministry (Best-Energy, CTQ2011-23632) for its financial support in this study. LEQUIA has been recognised as a consolidated research group by the Catalan Government (2014-SGR-1168). R.G. gratefully acknowledges support from Beatriu de Pinos fellowship (BP-2011-B) and FP7 Marie Curie Career Integration Grants (PCIG13-GA-2013-618593). P.B.-V is supported by a project grant from the Catalan Government (2014 FI-B1 00119)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Integrated side-stream reactor for biological nutrient removal and minimization of sludge production

  • Coma Bech, Marta
  • Rovira, Salvador
  • Canals, Joan
  • Colprim Galceran, Jesús
Integrated processes to reduce in situ the sludge production in wastewater treatment plants are gaining attention in order to facilitate excess sludge management. In contrast to post-treatments, such as anaerobic digestion which is placed between the activated sludge system and dewatering processes, integrated technologies are placed in the sludge return line. This study evaluates the application of an anoxic side-stream reactor (SSR) which creates a physiological shock and uncouples the biomass metabolism and diverts the activity from assimilation for biosynthesis to non-growth activities. The effect of this system in biological nutrient removal for both nitrogen and phosphorus was evaluated for the anaerobic, anoxic and aerobic reactors. The RedOx potential within the SSR was maintained at - 150 mV while the sludge loading rate was modified by increasing the percentage of recycled activated sludge feed to the SSR (0 and 40% at laboratory scale and 0, 10, 50 and 100% at pilot scale). The use of the SSR presented a slight reduction of phosphorus removal but maintained the effluent quality to the required discharge values. Nitrogen removal efficiency increased from 75 to 86% while reducing the sludge production rate by 18.3%, This research was financially supported by the Spanish Government (CSD2007-00055, CTQ2011-23632, CTQ2011-24114/PPQ, 033/RN08/03.2 and IPT-2011-1073-310000) and OHL Medio Ambiente, INIMA SAU
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Extracellular electron transfer of biocathodes: Revealing the potentials for nitrate and nitrite reduction of denitrifying microbiomes dominated by Thiobacillus sp.

  • Pous Rodríguez, Narcís
  • Koch, Christin
  • Colprim Galceran, Jesús
  • Puig Broch, Sebastià
  • Harnisch, Falk
The use of biocathodes in bioelectrochemical systems (BES) for the removal of nitrate in wastewater has become a vital field of research. However, the elucidation of the underlying extracellular electron transfer (EET) fundamentals of denitrifying biocathodes is still lacking, but required for a deeper BES understanding and engineering. This study reports for the first time on the thermodynamics of microbial cathodes for nitrate and nitrite reductions using microbial microcosms isolated from a running denitrifying BES. Cyclic voltammetry showed that nitrate and nitrite reduction proceed at - 0.30 V, and - 0.70 V vs. Ag/AgCl, respectively, by surface associated EET sites. The biocathodes were predominantly covered by Thiobacillus sp. contributing with a nitrate reductase (narG) to the major function of the microcosms. In conclusion, the EET characteristics of denitrifying biocathodes are demonstrated for the first time, The authors acknowledge the scientific assistance of Prof. M.D. Balaguer. F.H. acknowledges support by the BMBF (Research Award "Next generation biotechnological processes-Biotechnology 2020+") and the Helmholtz Association (Young Investigators Group). This work was supported by the Helmholtz Association within the Research Programme Terrestrial Environment and by the Spanish Government (CTQ2011-23632). N.P. was supported by the Catalan Government (2012FI-B00941) and the University of Girona (MOB2014-ref22)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Minimization of sludge production by a side-stream reactor under anoxic conditions in a pilot plant

  • Coma Bech, Marta
  • Rovira, Salvador
  • Canals, Joan
  • Colprim Galceran, Jesús
This study evaluates the application of an anoxic side-stream reactor in the sludge return line of a conventional activated sludge system for the reduction of biomass production. The oxidation-reduction potential was maintained at -150mV while the applied sludge loading rate was modified by changing the percentage of return sludge treated in this reactor. The observed yield from the conventional system (0.513kg VSSkg-1 COD) was continuously reduced when the portion of return sludge treated was increased. A maximum reduction of 18.3% of the observed yield was obtained treating the whole sludge return line. The sludge age maintained through the experiment. The organic matter removal was not deteriorated, even improved, by the proposed plant modification. Thus, simply applying an anoxic side-stream reactor would decrease the final volume of waste sludge while maintaining the sludge retention time and would, in fact, decrease the economic costs in terms of sludge handling, This research was financially supported by the Spanish Government (CSD2007-00055, CTQ2011-23632, CTQ2011-24114/PPQ, 033/RN08/03.2 and IPT-2011-1073-310000) and GS Inima
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Role of Operating Conditions on Energetic Pathways in a Microbial Fuel Cell

  • Capodaglio, Andrea G.
  • Molognoni, Daniele
  • Puig Broch, Sebastià
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
The electric performance of a Microbial Fuel Cell (MFC) fed with swine manure, and specifically the interactions between different coexisting bacterial populations are examined in relationship to the Organic Loading Rate (OLR) and External Resistance applied to the cell. Feasibility of swine manure treatment using MFCs was already demonstrated by previous studies, however low Coulombic efficiencies were attained due to a competing methanogenic degradation occurring in the same cells. External resistance (Rext) and Organic Loading Rate have been identified as two of the key parameters affecting the balance between exoelectrogenic and methanogenic bacterial populations in a MFC system; despite this, virtually no attention had been paid to the study of OLR influence on MFCs performance. This study evaluates the performance of a MFC, treating swine manure, in this perspective, demonstrating that high OLRs (up to 11.2 kg COD m3/d) have a limiting effect on MFCs electrochemical losses, and increase absolute values of ORR (4.6 kg COD m3/d) and current production (14.9 mA). On the other hand, adoption of low OLR (as low as 0.7 kg COD m3/d) translates in an increase of both organic matter removal efficiency (52%) and Coulombic efficiency (higher than 70%). These improvements can be directly connected with the shifting balance between exoelectrogenic and methanogenic biomass populations, as confirmed by the cell's anode off-gas analysis. Hence, by adopting the appropriate design value of ORL and operating conditions, the MFC's biofilm exoelectrogenic population fraction, and thus its overall activity, can be improved considerably, Mr. Molognoni was supported by a scholarship from the University of Pavia, and by a LLP/ERASMUS mobility grant at Lequia, Girona (Spain), where this research was in part supported by a grant from the Spanish Government (CTQ 2011-23632)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

How can alcohol production be improved in carboxydotrophic clostridia?

  • Ramió Pujol, Sara
  • Ganigué Pagès, Ramon
  • Bañeras Vives, Lluís
  • Colprim Galceran, Jesús
Clostridia are well-known organisms within the scientific community, and many aspects of their life cycle have been studied. Autotrophic strains are especially interesting as microbial cell factories for industrial purposes. Carboxydotrophic clostridia can use CO<inf>2</inf>/H<inf>2</inf> and/or CO as their only carbon and reducing power sources, and they produce alcohols and acids. Both products can be used as either biofuels or feedstock chemicals for many industrial processes, confirming the control of carboxydotrophic clostridia metabolism as one of the most profitable scientific ambitions to be explored. Here, we review the current state of research on alcohol production by carboxydotrophic clostridia, including a comprehensive overview of their metabolic pathways and the key experimental variables that govern alcohol production. Additionally, the genetic and genomic tools for selective and enhanced solvent production, which are currently under intense development, are discussed. In this context, this review covers the main genetic engineering methods that have been utilized to improve the capabilities of solventogenic carboxydotrophic bacteria, The review was prepared within the framework of the fellowship 2013 FI-DGR from Catalan Government and projects Best-Energy CTQ2011-23632 and CTM2013-43454-R from Spanish Ministry. LEQUIA and [BA are recognized as consolidated research groups by the Catalan Government (2014-SGR-1168 and 2014-SGR-2016). Ramon Ganigue gratefully acknowledges support from the Beatriu de Pinos Fellowship (BP-2011-B) and FP7 Marie Curie Career Integration Grants (PCIG13-GA-2013-618593
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Denitrifying Bacterial Communities Affect Current Production and Nitrous Oxide Accumulation in a Microbial Fuel Cell

  • Vilar Sanz, Ariadna
  • Puig Broch, Sebastià
  • García Lledó, Arantzazu
  • Trias Mansilla, Rosalia
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
  • Bañeras Vives, Lluís
The biocathodic reduction of nitrate in Microbial Fuel Cells (MFCs) is an alternative to remove nitrogen in low carbon to nitrogen wastewater and relies entirely on microbial activity. In this paper the community composition of denitrifiers in the cathode of a MFC is analysed in relation to added electron acceptors (nitrate and nitrite) and organic matter in the cathode. Nitrate reducers and nitrite reducers were highly affected by the operational conditions and displayed high diversity. The number of retrieved species-level Operational Taxonomic Units (OTUs) for narG, napA, nirS and nirK genes was 11, 10, 31 and 22, respectively. In contrast, nitrous oxide reducers remained virtually unchanged at all conditions. About 90% of the retrieved nosZ sequences grouped in a single OTU with a high similarity with Oligotropha carboxidovorans nosZ gene. nirS-containing denitrifiers were dominant at all conditions and accounted for a significant amount of the total bacterial density. Current production decreased from 15.0 A·m−3 NCC (Net Cathodic Compartment), when nitrate was used as an electron acceptor, to 14.1 A·m−3 NCC in the case of nitrite. Contrarily, nitrous oxide (N2O) accumulation in the MFC was higher when nitrite was used as the main electron acceptor and accounted for 70% of gaseous nitrogen. Relative abundance of nitrite to nitrous oxide reducers, calculated as (qnirS+qnirK)/qnosZ, correlated positively with N2O emissions. Collectively, data indicate that bacteria catalysing the initial denitrification steps in a MFC are highly influenced by main electron acceptors and have a major influence on current production and N2O accumulation, A. V-S. and A. G-L. are recipients of pre-doctoral grants from the Universitat de Girona and the Ministerio de Ciencia y Educacion, respectively. This research was funded through grants from the Spanish Government (CGL2009-08338, CSD2007-00055 and CTQ2011-23632)