Skip to main content

DISEÑO, CONSTRUCCION Y VALIDACION DE UNA PLATAFORMA BIOMIMETICA PARA LA EVALUACION FUNCIONAL Y OPTIMIZACION DE CONSTRUCTOS DE INGENIERIA TISULAR DE CARTILAGO ARTICULAR

DPI2010-20399-C04-01

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biomimetic hydroxyapatite coating on pore walls improves osteointegration of poly(L-lactic acid) scaffolds

  • Deplaine, Harmony
  • Lebourg, Myriam Madeleine
  • Ripalda, P
  • Sanz-Ramos, Patricia
  • Mora, Gonzalo
  • Prósper, Felipe
  • Ochoa, I.
  • Doblare Castellano, Manuel
  • IZAL AZCARATE, IÑIGO
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Polymer ceramic composites obtained as the result of a mineralization process hold great promise for the future of tissue engineering. Simulated body fluids (SBFs) are widely used for the mineralization of polymer scaffolds. In this work an exhaustive study with the aim of optimizing the mineralization process on a poly(L-lactic acid) (PLLA) macroporous scaffold has been performed. We observed that when an air plasma treatment is applied to the PLLA scaffold its hydroxyapatite nucleation ability is considerably improved. However, plasma treatment only allows apatite deposition on the surface of the scaffold but not in its interior. When a 5 wt % of synthetic hydroxyapatite (HAp) nanoparticles is mixed with PLLA a more abundant biomimetic hydroxyapatite layer grows inside the scaffold in SBF. The morphology, amount, and composition of the generated biomimetic hydroxyapatite layer on the pores surface have been analyzed. Large mineralization times are harmful to pure PLLA as it rapidly degrades and its elastic compression modulus significantly decreases. Degradation is retarded in the composite scaffolds because of the faster and extensive biomimetic apatite deposition and the role of HAp to control the pH. Mineralized scaffolds, covered by an apatite layer in SBF, were implanted in osteochondral lesions performed in the medial femoral condyle of healthy sheep. We observed that the presence of biomimetic hydroxyapatite on the pore s surface of the composite scaffold produces a better integration in the subchondral bone, in comparison to bare PLLA scaffolds., Contract grant sponsor: CIBER-BBN, VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, Instituto de Salud Carlos III with assistance from the European Regional Development Fund
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computational methodology to determine fluid related parameters on non regular three-dimensional scaffolds

  • Acosta Santamaría, Víctor Andrés
  • Malvé, M.
  • Duizabo, A.
  • Mena Tobar, A.
  • García Aznar, J.M.
  • Doblare Castellano, Manuel
  • Ochoa, I.
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
The application of three-dimensional (3D) biomaterials to facilitate the adhesion, proliferation, and differentiation of cells has been widely studied for tissue engineering purposes. The fabrication methods used to improve the mechanical response of the scaffold produce complex and non regular structures. Apart from the mechanical aspect, the fluid behavior in the inner part of the scaffold should also be considered. Parameters such as permeability (k) or wall shear stress (WSS) are important aspects in the provision of nutrients, the removal of metabolic waste products or the mechanically-induced differentiation of cells attached in the trabecular network of the scaffolds. Experimental measurements of these parameters are not available in all labs. However, fluid parameters should be known prior to other types of experiments. The present work compares an experimental study with a computational fluid dynamics (CFD) methodology to determine the related fluid parameters (k and WSS) of complex non regular poly(L-lactic acid) scaffolds based only on the treatment of microphotographic images obtained with a microCT (lCT). The CFD analysis shows similar tendencies and results with low relative difference compared to those of the experimental study, for high flow rates. For low flow rates the accuracy of this prediction reduces. The correlation between the computational and experimental results validates the robustness of the proposed methodology., The authors gratefully acknowledge research support from the Spanish Ministry of Science and Innovation through research project DPI2010-20399-C04-01. The Instituto de Salud Carlos III (ISCIII) through the CIBER initiative and the Platform for Biological Tissue Characterization of the Centro de Investigacion Biomedica en Red en Bioingenieria, Biomateriales y Nanomedicina (CIBER-BBN) are also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Culture of human bone marrow-derived mesenchymal stem cells on of poly(L-lactic acid) scaffolds: potential application for the tissue engineering of cartilage

  • Izal, Iñigo
  • Aranda, Pablo
  • Sanz Ramos, Patricia
  • Ripalda, Purificacion
  • Mora, Gonzalo
  • Granero Molto, Froilan
  • Deplaine, Harmony
  • Acosta, Victor
  • Ochoa, Ignacio
  • García Aznar, Manuel
  • Andreu, Enrique J.
  • Doblare Castellano, Manuel
  • Prosper, Felipe
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
Due to the attractive properties of poly(l-lactic acid) (PLLA) for tissue engineering, the aim was to determine the growth and differentiation capacity of mesenchymal stromal cells (MSCs) in PLLA scaffolds and their potential use in the treatment of cartilage diseases. MSCs were cultured in PLLA films and thin porous membranes to study adherence and proliferation. Permeability and porosity were determined for the different scaffolds employed. The optimal conditions for cell seeding were first determined, as well as cell density and distribution inside the PLLA. Scaffolds were then maintained in expansion or chondrogenic differentiation media for 21 days. Apoptosis, proliferation and chondrogenic differentiation was assessed after 21 days in culture by immunohistochemistry. Mechanical characteristics of scaffolds were determined before and after cell seeding. MSCs uniformly adhered to PLLA films as well as to porous membranes. Proliferation was detected only in monolayers of pure PLLA, but was no longer detected after 10 days. Mechanical characterization of PLLA scaffolds showed differences in the apparent compression elastic modulus for the two sizes used. After determining high efficiencies of seeding, the production of extracellular matrix (ECM) was determined and contained aggrecan and collagens type I and X. ECM produced by the cells induced a twofold increase in the apparent elastic modulus of the composite. Biocompatible PLLA scaffolds have been developed that can be efficiently loaded with MSCs. The scaffold supports chondrogenic differentiation and ECM deposition that improves the mechanics of the scaffold. Although this improvement does not met the expectations of a hyaline-like cartilage ECM, in part due to the lack of a mechanical stimulation, their potential use in the treatment of cartilage pathologies encourages to improve the mechanical component., This work has been supported by the Spanish Ministry of Science and Innovation DPI2010-20399-C04-00 project and Instituto de Salud Carlos III RETIC RD06/0014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the macro and micro-porous structure on the mechanical behavior of poly(L-lactic acid) scaffolds

  • Acosta Santamaria, V.
  • Deplaine, Harmony
  • Mariggio, D.
  • Villanueva Molines, Ana Rosalía
  • Garcia Aznar, Jose Manuel
  • Doblare Castellano, Manuel
  • Ochoa, I.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
The development of macroporous biodegradable polymeric materials with three-dimensional pore structure is an important research field in tissue engineering. Structural scaffolds not only provide the cells with a mechanical support, but also perform an interactive physico-chemical role in tissue regeneration, thus it becomes important to be able to tune their mechanical properties to deliver appropriate mechanical signals to adhered cells for proper tissue regeneration. This work presents two series of poly(L-lactic acid) (PLLA) scaffolds in which we modulated the mechanical properties by systematically changing two synthesis parameters: polymer/solvent ratio and polymer-solution/porogen percentage. The peculiarity of the constructs is the presence of a double porosity: micropores generated by dioxane solvent using a freeze extraction technique and macropores produced by the leaching of macroporogen spheres. An increase in the PLLA/dioxane ratio decreases the micropores size and also influences to some extent the macropores size, due to the ability of dioxane to swell macroporogen particles. On the other hand, an increase in the amount of macroporogen increases the porosity by increasing the dimension of pore the throats connecting the macropores. Consequently, the increase in the PLLA/dioxane ratio produces a significant decrease in the permeability, and an increase in the apparent compression Young's modulus and aggregate modulus. When increasing the amount of macroporogen the permeability significantly increases and a decrease in the mechanical properties of the scaffolds is observed. Summarizing, with a systematic change of two fabrication parameters (amount of dioxane and macroporogen) the structural characteristics of the scaffolds were modulated and thereby their mechanical and transport properties were controlled., The authors gratefully acknowledge research support from the Spanish Ministry of Science and Innovation through research project DPI2010-20399-C04-00. CIBER-BBN is an initiative funded by the VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, and Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cartilage Dysfunction in ALS Patients as Side Effect of Motion Loss: 3D Mechano-Electrochemical Computational Model

  • Manzano, Sara
  • Gaffney, Eamonn A.
  • Doblaré, Manuel
  • Hamdy Doweidar, Mohamed
Amyotrophic lateral sclerosis (ALS) is a debilitating motor neuron disease characterized by progressive weakness, muscle atrophy, and fasciculation. This fact results in a continuous degeneration and dysfunction of articular soft tissues. Specifically, cartilage is an avascular and nonneural connective tissue that allows smooth motion in diarthrodial joints. Due to the avascular nature of cartilage tissue, cells nutrition and by-product exchange are intermittently occurring during joint motions. Reduced mobility results in a change of proteoglycan density, osmotic pressure, and permeability of the tissue. This work aims to demonstrate the abnormal cartilage deformation in progressive immobilized articular cartilage for ALS patients. For this aim a novel 3D mechano-electrochemical model based on the triphasic theory for charged hydrated soft tissues is developed. ALS patient parameters such as tissue porosity, osmotic coefficient, and fixed anions were incorporated. Considering different mobility reduction of each phase of the disease, results predicted the degree of tissue degeneration and the reduction of its capacity for deformation. The present model can be a useful tool to predict the evolution of joints in ALS patients and the necessity of including specific cartilage protectors, drugs, or maintenance physical activities as part of the symptomatic treatment in amyotrophic lateral sclerosis.