Skip to main content

DISEÑO Y FABRICACION DE UNA PLATAFORMA BIOMIMETICA TIPO SCAFFOLD/SOPORTE PARA LA REGENERACION DEL CARTILAGO ARTICULAR

DPI2010-20399-C04-03

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: Morphology, mechanical properties and bioactivity

  • Milovac, Dajana
  • Ivankovic, Marica
  • Ivankovic, Hrvoje
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] In the present study, poly(epsilon-caprolactone)-coated hydroxyapatite scaffold derived from cuttlefish bone was prepared. Hydrothermal transformation of aragonitic cuttlefish bone into hydroxyapatite (HAp) was performed at 200 C retaining the cuttlebone architecture. The HAp scaffold was coated with a poly(c-caprolactone) (PCL) using vacuum impregnation technique. The compositional and morphological properties of HAp and PCL-coated HAp scaffolds were studied by means of X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis. Bioactivity was tested by immersion in Hank's balanced salt solution (HBSS) and mechanical tests were performed at compression. The results showed that PCL-coated HAp (HAp/PCL) scaffold resulted in a material with improved mechanical properties that keep the original interconnected porous structure indispensable for tissue growth and vascularization. The compressive strength (0.88 MPa) and the elastic modulus (15.5 MPa) are within the lower range of properties reported for human trabecular bones. The in vitro mineralization of calcium phosphate (CP) that produces the bone-like apatite was observed on both the pure HAp scaffold and the HAp/PCL composite scaffold. The prepared bioactive scaffold with enhanced mechanical properties is a good candidate for bone tissue engineering applications., The financial support of the Ministry of Science, Education and Sports of the Republic of Croatia (project 125-1252970-3005: "Bioceramic, Polymer and Composite Nanostructured Materials") and from the Spanish Ministry project DPI2010-20399-C04-03 is gratefully acknowledged. Rocio Ochoa-Fernandez is also acknowledged for her help with the mechanical tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fibrin-chitosan composite substrate for in vitro culture of chondrocytes

  • Gamboa Martínez, Tatiana Carolina
  • García Cruz, Dunia Mercedes
  • Carda, Carmen
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
The aim of this study was to develop a biocompatible monolayer substrate based on fibrin and chitosan for in vitro culture of chondrocytes. Fibrin-chitosan composite substrates combined the proved cell adhesion properties of fibrin with the hydrophilicity and poor adhesion capacity of chitosan. Chitosan microspheres were produced by coacervation method, agglomerated within a fibrin network and subsequently crosslinked with genipin. The composite substrate was stable for 28 days of culture due to the high crosslinking density. Human chondrocytes cultured on the composite substrate were viable during the culture period. At the end of culture time (28 days) the composite substrate showed low cellular proliferation, 41% more collagen type II and 13% more production of sulfated glycosaminoglycans with respect to the amounts found at 14 days. The study revealed that dedifferentiated chondrocytes cultured in monolayer on the composite substrate can re-acquire characteristics of differentiated cells without using three-dimensional substrates or chondrogenic media., Contract grant sponsor: Spanish Ministry; contract grant number: DPI2010-20399-C04-03
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biomimetic hydroxyapatite coating on pore walls improves osteointegration of poly(L-lactic acid) scaffolds

  • Deplaine, Harmony
  • Lebourg, Myriam Madeleine
  • Ripalda, P
  • Sanz-Ramos, Patricia
  • Mora, Gonzalo
  • Prósper, Felipe
  • Ochoa, I.
  • Doblare Castellano, Manuel
  • IZAL AZCARATE, IÑIGO
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Polymer ceramic composites obtained as the result of a mineralization process hold great promise for the future of tissue engineering. Simulated body fluids (SBFs) are widely used for the mineralization of polymer scaffolds. In this work an exhaustive study with the aim of optimizing the mineralization process on a poly(L-lactic acid) (PLLA) macroporous scaffold has been performed. We observed that when an air plasma treatment is applied to the PLLA scaffold its hydroxyapatite nucleation ability is considerably improved. However, plasma treatment only allows apatite deposition on the surface of the scaffold but not in its interior. When a 5 wt % of synthetic hydroxyapatite (HAp) nanoparticles is mixed with PLLA a more abundant biomimetic hydroxyapatite layer grows inside the scaffold in SBF. The morphology, amount, and composition of the generated biomimetic hydroxyapatite layer on the pores surface have been analyzed. Large mineralization times are harmful to pure PLLA as it rapidly degrades and its elastic compression modulus significantly decreases. Degradation is retarded in the composite scaffolds because of the faster and extensive biomimetic apatite deposition and the role of HAp to control the pH. Mineralized scaffolds, covered by an apatite layer in SBF, were implanted in osteochondral lesions performed in the medial femoral condyle of healthy sheep. We observed that the presence of biomimetic hydroxyapatite on the pore s surface of the composite scaffold produces a better integration in the subchondral bone, in comparison to bare PLLA scaffolds., Contract grant sponsor: CIBER-BBN, VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, Instituto de Salud Carlos III with assistance from the European Regional Development Fund
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Culture of human bone marrow-derived mesenchymal stem cells on of poly(L-lactic acid) scaffolds: potential application for the tissue engineering of cartilage

  • Izal, Iñigo
  • Aranda, Pablo
  • Sanz Ramos, Patricia
  • Ripalda, Purificacion
  • Mora, Gonzalo
  • Granero Molto, Froilan
  • Deplaine, Harmony
  • Acosta, Victor
  • Ochoa, Ignacio
  • García Aznar, Manuel
  • Andreu, Enrique J.
  • Doblare Castellano, Manuel
  • Prosper, Felipe
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
Due to the attractive properties of poly(l-lactic acid) (PLLA) for tissue engineering, the aim was to determine the growth and differentiation capacity of mesenchymal stromal cells (MSCs) in PLLA scaffolds and their potential use in the treatment of cartilage diseases. MSCs were cultured in PLLA films and thin porous membranes to study adherence and proliferation. Permeability and porosity were determined for the different scaffolds employed. The optimal conditions for cell seeding were first determined, as well as cell density and distribution inside the PLLA. Scaffolds were then maintained in expansion or chondrogenic differentiation media for 21 days. Apoptosis, proliferation and chondrogenic differentiation was assessed after 21 days in culture by immunohistochemistry. Mechanical characteristics of scaffolds were determined before and after cell seeding. MSCs uniformly adhered to PLLA films as well as to porous membranes. Proliferation was detected only in monolayers of pure PLLA, but was no longer detected after 10 days. Mechanical characterization of PLLA scaffolds showed differences in the apparent compression elastic modulus for the two sizes used. After determining high efficiencies of seeding, the production of extracellular matrix (ECM) was determined and contained aggrecan and collagens type I and X. ECM produced by the cells induced a twofold increase in the apparent elastic modulus of the composite. Biocompatible PLLA scaffolds have been developed that can be efficiently loaded with MSCs. The scaffold supports chondrogenic differentiation and ECM deposition that improves the mechanics of the scaffold. Although this improvement does not met the expectations of a hyaline-like cartilage ECM, in part due to the lack of a mechanical stimulation, their potential use in the treatment of cartilage pathologies encourages to improve the mechanical component., This work has been supported by the Spanish Ministry of Science and Innovation DPI2010-20399-C04-00 project and Instituto de Salud Carlos III RETIC RD06/0014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chondrocytes cultured in an adhesive macroporous scaffold subjected to stirred flow bioreactor behave like in static culture

  • Gamboa Martínez, Tatiana Carolina
  • Lebourg, Myriam Madeleine
  • Salmerón Sánchez, Manuel
  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] The aim of this study was to evaluate whether mechanical stimulation helps to modulate the redifferentiation of human chondrocytes on adhesive 3D substrates. In a previous work, it was shown that chondrocytes seeded in a non-adherent porous scaffold cluster inside the pores when cultured in a bioreactor and produced extracellular matrix with the components of hyaline cartilage suggesting cellular redifferentiation. The current study followed the same culture protocol for up to 4 weeks using two substrates with good adhesion properties: polycaprolactone (PCL) scaffolds uncoated, and coated with fibrin. The cellular response was characterized by studying the cell-material interaction at short times (6, 24 and 72 h), followed by the use of a biological stirrer to evaluate its effect on the chondrogenesis for 7, 14 and 28 days. The study showed strong cell-substrate interaction in both coated and uncoated scaffolds. In short times, cells adhere to the pore walls, form focal adhesions, develop actin fibers and acquire spread morphology showing the characteristics of a monolayer culture. The use of a bioreactor system was useful for reducing cellular proliferation for up to 14 days but no signs of redifferentiation were found for long culture times., The authors are grateful for the financial support received from the Spanish Ministry through the DPI2010-20399-004-03 project. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. We would also like to thank Dr. N. Garcia-Giralt from the Institut Municipal d'Investigacio Medica de l'Hospital del Mar, Barcelona, for supplying chondrocytes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrolytic and enzymatic degradation of a poly(å-caprolactone) network

  • Castilla Cortázar, María Isabel Cecilia
  • Escobar Ivirico, Jorge Luis
  • Más Estellés, Jorge|||0000-0001-8446-6737
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Marí, B.|||0000-0003-0001-419X
  • Vidaurre, Ana|||0000-0003-3394-1176
Long-term hydrolytic and enzymatic degradation profiles of poly(å-caprolactone) (PCL) networks were obtained. The hydrolytic degradation studies were performed in water and phosphate buffer solution (PBS) for 65 weeks. In this case, the degradation rate of PCL networks was faster than previous results in the literature on linear PCL, reaching a weight loss of around 20% in 60 weeks after immersing the samples either in water or in PBS conditions. The enzymatic degradation rate in Pseudomonas Lipase for 14 weeks was also studied, with the conclusion that the degradation profile of PCL networks is lower than for linear PCL, also reaching a 20% weight loss. The weight lost, degree of swelling, and calorimetric and mechanical properties were obtained as a function of degradation time. Furthermore, the morphological changes in the samples were studied carefully through electron microscopy and crystal size through X-ray diffraction. The changes in some properties over the degradation period such as crystallinity, crystal size and Young¿s modulus were smaller in the case of enzymatic studies, highlighting differences in the degradation mechanism in the two studies, hydrolytic and enzymatic., The authors would like to acknowledge the support of the Spanish Ministry of Science and Education through the DPI2010-20399-004-03 project. JM Meseguer-Duenas and A Vidaurre also would like to acknowledge the support of the CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The translation of this paper was funded by the Universidad Politecnica de Valencia, Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combination of silica nanoparticles with hydroxyapatite reinforces PLLA scaffolds without loss of bioactivity

  • Guerzoni, Samuele
  • Deplaine, Harmony
  • El Haskouri, Jamal
  • Amoros, Pedro
  • Edlund, Ulrica
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
Composite scaffolds of poly(l-lactide acid) and hydroxyapatite are of great interest in bone tissue engineering, but their mechanical properties are typically inferior to scaffolds of pure poly(l-lactide acid) due to agglomeration of the particles and weak interfacial component interaction. Fabrication strategies like double sonication of hydroxyapatite or increasing the amount of this inorganic filler do not effectively enhance the mechanical performance. In this study, poly(l-lactide acid) composites combining two types of fillers, mesoporous silica (SiO2) nanoparticles and hydroxyapatite, were developed to reinforce the poly(l-lactide acid) scaffold without any loss of bioactivity. A 5% addition of SiO2 nanoparticles to hydroxyapatite nanopowder and subjecting the scaffold formulation to double sonication increased the Young's modulus from 5 MPa (pure poly(l-lactide acid) scaffold) to almost 7 MPa (poly(l-lactide acid)/hydroxyapatite/SiO2 scaffold). In addition, the composite was able to deposit a layer of biomimetic hydroxyapatite both on the surface and interior of the scaffold after 21 days of immersion in a simulated body fluid. The manufacturing method was straightforward and economically viable and does not require any chemical modification of the particles' surfaces., This work was supported by the Spanish Ministry of Science and Innovation through the DPI2010-20399-C04-03 project. CIBER-BBN was an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010 and Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: in vitro cell culture studies

  • Milovac, Dajana
  • Gamboa-Martinez, Tatiana C.
  • Ivankovic, Marica
  • Ivankovic, Hrvoje
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] In the present study, we examined the potential of using highly porous poly(epsilon-caprolactone) (PCL)-coated hydroxyapatite (HAp) scaffold derived from cuttlefish bone for bone tissue engineering applications. The cell culture studies were performed in vitro with preosteoblastic MC3T3-E1 cells in static culture conditions. Comparisons were made with uncoated HAp scaffold. The attachment and spreading of preosteoblasts on scaffolds were observed by Live/Dead staining Kit. The cells grown on the HAp/PCL composite scaffold exhibited greater spreading than cells grown on the HAp scaffold. DNA quantification and scanning electron microscopy (SEM) confirmed a good proliferation of cells on the scaffolds. DNA content on the HAp/PCL scaffold was significantly higher compared to porous HAp scaffolds. The amount of collagen synthesis was determined using a hydroxyproline assay. The osteoblastic differentiation of the cells was evaluated by determining alkaline phosphatase (ALP) activity and collagen type I secretion. Furthermore, cell spreading and cell proliferation within scaffolds were observed using a fluorescence microscope. (C) 2014 Elsevier B.V. All rights reserved., The financial support of the Ministry of Science, Education and Sports of the Republic of Croatia (Project 125-1252970-3005: "Bioceramic, Polymer and Composite Nanostructured Materials"), the Spanish Ministry project DPI2010-20399-C04-03 and the L'Oreal ADRIA-UNESCO national fellowship program for Women in Science is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bioactive organic inorganic poly(CLMA-co-HEA)/silica nanocomposites

  • Ivashchenko, Sergiy|||0000-0003-1633-4665
  • Campillo-Fernández, Alberto J.|||0000-0002-2978-5994
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Escobar Ivirico, Jorge Luis
  • García Cruz, Dunia Mercedes
[EN] A series of novel poly(CLMA-co-HEA)/silica nanocomposites is synthesized from caprolactone 2-(methacryloyloxy)ethyl ester (CLMA) and 2-hydroxyethyl acrylate (HEA) as organic comonomers and the simultaneous sol-gel polymerization of tetraethyloxysilane (TEOS) as silica precursor, in different mass ratios up to a 30 wt% of silica. The nanocomposites are characterized as to their mechanical and thermal properties, water sorption, bioactivity and biocompatibility, reflecting the effect on the organic matrix provided by the silica network formation. The nanocomposites nucleate the growth of hydroxyapatite (HAp) on their surfaces when immersed in the simulated body fluid of the composition used in this work. Proliferation of the MC3T3 osteoblast-like cells on the materials was assessed with the MTS assay showing their biocompatibility. Immunocytochemistry reveals osteocalcin and type I collagen production, indicating that osteoblast differentiation was promoted by the materials, and calcium deposition was confirmed by von Kossa staining. The results indicate that these poly(CLMA-co-HEA)/silica nanocomposites could be a promising biomaterial for bone tissue engineering., The authors acknowledge the financial support from the Spanish Ministry of Science and Innovation through projects DPI2010-20399-c04-03 and MAT2011-28791-C03-02. AJCF acknowledges support through Torres Quevedo grant PTQ08-02-06321. GGF and MMP acknowledge support of CIBER-BBN initiative, financed by Instituto de Salud Carlos III (Spain) with the assistance of the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the macro and micro-porous structure on the mechanical behavior of poly(L-lactic acid) scaffolds

  • Acosta Santamaria, V.
  • Deplaine, Harmony
  • Mariggio, D.
  • Villanueva Molines, Ana Rosalía
  • Garcia Aznar, Jose Manuel
  • Doblare Castellano, Manuel
  • Ochoa, I.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
The development of macroporous biodegradable polymeric materials with three-dimensional pore structure is an important research field in tissue engineering. Structural scaffolds not only provide the cells with a mechanical support, but also perform an interactive physico-chemical role in tissue regeneration, thus it becomes important to be able to tune their mechanical properties to deliver appropriate mechanical signals to adhered cells for proper tissue regeneration. This work presents two series of poly(L-lactic acid) (PLLA) scaffolds in which we modulated the mechanical properties by systematically changing two synthesis parameters: polymer/solvent ratio and polymer-solution/porogen percentage. The peculiarity of the constructs is the presence of a double porosity: micropores generated by dioxane solvent using a freeze extraction technique and macropores produced by the leaching of macroporogen spheres. An increase in the PLLA/dioxane ratio decreases the micropores size and also influences to some extent the macropores size, due to the ability of dioxane to swell macroporogen particles. On the other hand, an increase in the amount of macroporogen increases the porosity by increasing the dimension of pore the throats connecting the macropores. Consequently, the increase in the PLLA/dioxane ratio produces a significant decrease in the permeability, and an increase in the apparent compression Young's modulus and aggregate modulus. When increasing the amount of macroporogen the permeability significantly increases and a decrease in the mechanical properties of the scaffolds is observed. Summarizing, with a systematic change of two fabrication parameters (amount of dioxane and macroporogen) the structural characteristics of the scaffolds were modulated and thereby their mechanical and transport properties were controlled., The authors gratefully acknowledge research support from the Spanish Ministry of Science and Innovation through research project DPI2010-20399-C04-00. CIBER-BBN is an initiative funded by the VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, and Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.