Skip to main content

DISEÑO DE ESTRATEGIAS AVANZADAS DE CONTROL Y DETECCION DE FALLOS PARA SISTEMAS MECATRONICOS COMPLEJOS

DPI2015-64170-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 72
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Fault detection algorithm for wind turbines’ pitch actuator systems

  • Pujol Vázquez, Gisela|||0000-0003-0067-2571
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
  • Gibergans Bàguena, José|||0000-0002-6201-6353
A fault detection innovation to wind turbines’ pitch actuators is an important subject to guarantee the efficiency wind energy conversion and long lifetime operation of these rotatory machines. Therefore, a recent and effective fault detection algorithm is conceived to detect faults on wind turbine pitch actuators. This approach is based on the interval observer framework theory that has proved to be an efficient tool to measure dynamic uncertainties in dynamical systems. It is evident that almost any fault in any actuator may affect its historical-time behavior. Hence, and properly conceptualized, a fault detection system can be successfully designed based on interval observer dynamics. This is precisely our main contribution. Additionally, we realize a numerical analysis to evaluate the performance of our approach by using a dynamic model of a pitch actuator device with faults. The numerical experiments support our main contribution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Capítulo o parte de un libro (BookPart)

Magnetic bearing for wind turbine power generator shaft: an emulator prototype design for vibration control

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Reza Karimi, Hamid
The objective of this work is to present a practical demonstration of the relevant role that can be played by micro-sized wind turbines (µSWTs) in research and education. To this end, we have designed an experimental platform for active magnetic bearing vibration control of a rotary shaft, which provides an excellent illustration of the mechatronical multidomain approach and, at the same time, makes it possible to perform advanced full-scale experimental studies on fundamental aspects of µSWTs, such as vibration control, fault detection or health monitoring. The platform prototype has been designed following the principles of cost-efficiency and limited usage of resources, which can be critical factors for its practical application. To illustrate the effectiveness of the proposed approach, a simple vibration control strategy has been implemented using a low-cost digital microcontroller., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A remote sensing scheme for fault diagnosis to wind turbines: an academic experimental set-up

  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
Nowadays, remote sensing for structural fault examination to wind turbines is an important technological challenger. On the other hand, laser diodes represent a low-cost option to implement a remote vibrometer sensor by just using cheap analog electronics. Therefore, a recent electronic circuit along with a laser diode is conceived to detect faults on a winding structure due to vibrations mainly induced by the wind and its rotary parts with possible mechanical defects. The electronic parts consist of a sequence of bandpass filters and peak detector stages. Besides, an academic experimental platform is constructed to validate the performance of the proposed remote sensing scheme for fault diagnosis in wind turbine structures., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Design of distributed multi-actuator systems with incomplete state information for vibration control of large structures

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Rodellar Benedé, José|||0000-0002-1514-7713
In this paper, we investigate the design and performance of static feedback controllers with partial-state information for the seismic protection of tall buildings equipped with incomplete multi-actuation systems. The proposed approach considers a partially instrumented multi-story building with an incomplete system of interstory force–actuation devices implemented on selected levels of the building, and an associated set of collocated sensors that measure the corresponding interstory drifts and interstory velocities. The main elements of the proposed controller design methodology are presented by means of a twenty-story building equipped with a system of ten interstory actuators arranged in three different layouts: concentrated, semi-distributed and fully-distributed. For these control configurations, partial-state controllers are designed following a static output-feedback H-infinity controller design approach, and the corresponding frequency and time responses are investigated. The obtained results clearly indicate that the proposed partial-state controllers are effective in mitigating the building seismic response. They also show that a suitable distribution of the instrumented stories is a relevant factor in the control system performance., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Rotary inverted pendulum with magnetically external perturbations as a source of the pendulum’s base navigation commands

  • Pujol Vázquez, Gisela|||0000-0003-0067-2571
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
  • Mobayen, Saleh
  • Nápoles Alberro, Amelia|||0000-0002-2251-2598
  • Perez Gracia, Vega
The main objective of this paper is to drive a rotary inverted pendulum by following a desired navigation instruction. This navigation is commanded by the user through a new electromagnetic device which is allowed to perturb the pendulum from its upright position. This apparatus consists of an electronic magnetic driving circuit to introduce commands and realized via two operated magnetic coils. So, the external programmed magnetic perturbation can be seen as external commandments. Therefore, the control problem statement is solved via a modified regulation control implementation, to maintain the pendulum on its upright position and giving free manipulation of the base of the rotary inverted pendulum. Hence, by using the corresponding H8-linear matrix inequality technique, a static state controller is designed and tested experimentally so supporting our findings., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An iterative linear matrix inequality controller-design strategy for H-infinity structural vibration control

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Reza Karimi, Hamid
This is an Accepted Manuscript of a book chapter published by Routledge/CRC Press in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications on 21 August 2019, available online: https://www.taylorfrancis.com/books/9780429426506, In this paper, we present a novel Iterative Linear Inequality (ILMI) strategy for controller design that makes it possible to compute suboptimal H-infinity static output-feedback (SOF) controllers with high-performance characteristics. The obtained SOF controllers can be effective in reducing the vibrational response of multi-degree-of-freedom structures subjected to broad-band excitations. To demonstrate the effectiveness of the proposed methodology, a SOF controller is designed for the seismic protection of a multi-actuated five-story shear-frame structure with positive result., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Interstory-interbuilding actuation schemes for seismic protection of adjacent identical buildings

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Rodellar Benedé, José|||0000-0002-1514-7713
Rows of closely adjacent buildings with similar dynamic characteristics are common building arrangements in residential areas. In this paper, we present a vibration control strategy for the seismic protection of this kind of multibuilding systems. The proposed approach uses an advanced Linear Matrix Inequality (LMI) computational procedure to carry out the integrated design of distributed multiactuation schemes that combine interbuilding linking devices with interstory actuators implemented at different levels of the buildings. The controller designs are formulated as static output-feedback H-infinity control problems that include the interstory drifts, interbuilding approachings and control efforts as controlled-output variables. The advantages of the LMI computational procedure are also exploited to design a fully-decentralized velocity-feedback controller, which can define a passive control system with high-performance characteristics. The main ideas are presented by means of a system of three adjacent five-story identical buildings, and a proper set of numerical simulations are conducted to demonstrate the behavior of the different control configurations. The obtained results indicate that interstory-interbuilding multiactuation schemes can be used to design effective vibration control systems for adjacent buildings with similar dynamic characteristics. Specifically, this kind of control systems is able to mitigate the vibrational response of the individual buildings while maintaining reduced levels of pounding risk., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Design of inerter-based multi-actuator systems for vibration control of adjacent structures

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
Distributed multi-actuator systems can provide effective solutions for mitigating the vibrational response of large structures. In this paper, we present a computational strategy to design inerter-based multi-actuation systems for the seismic protection of adjacent structures. The proposed approach allows considering both interstory and interbuilding Tuned Mass-Inerter Damper (TMID) actuators, and aims at simultaneously reducing the vibrational response of the individual buildings and avoiding the interbuilding impacts. The tuning procedure is based on an H8 cost-function and uses a constrained global-optimization solver to compute parameter configurations with high-performance characteristics. To illustrate the main features of this work, two different Tuned Inerter Damper (TID) multi-actuator schemes are considered for the seismic protection of a particular multi-story two-building system. A multi-actuator Tuned Mass Damper (TMD) system is also designed and is taken as a reference in the performance assessment. The obtained results demonstrate the flexibility and effectiveness of the proposed design methodology, and clearly show the superior performance and robustness of the TID actuation systems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hybrid passivity based and fuzzy type-2 controller for chaotic and hyper-chaotic systems

  • Serrano, Fernando E.
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
In this paper a hybrid passivity based and fuzzy type-2 controller for chaotic and hyper-chaotic systems is presented. The proposed control strategy is an appropriate choice to be implemented for the stabilization of chaotic and hyper-chaotic systems due to the energy considerations of the passivity based controller and the flexibility and capability of the fuzzy type-2 controller to deal with uncertainties. As it is known, chaotic systems are those kinds of systems in which one of their Lyapunov exponents is real positive, and hyper-chaotic systems are those kinds of systems in which more than one Lyapunov exponents are real positive. In this article one chaotic Lorentz attractor and one four dimensions hyper-chaotic system are considered to be stabilized with the proposed control strategy. It is proved that both systems are stabilized by the passivity based and fuzzy type-2 controller, in which a control law is designed according to the energy considerations selecting an appropriate storage function to meet the passivity conditions. The fuzzy type-2 controller part is designed in order to behave as a state feedback controller, exploiting the flexibility and the capability to deal with uncertainties. This work begins with the stability analysis of the chaotic Lorentz attractor and a four dimensions hyper-chaotic system. The rest of the paper deals with the design of the proposed control strategy for both systems in order to design an appropriate controller that meets the design requirements. Finally, numerical simulations are done to corroborate the obtained theoretical results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Robust control design to the Furuta system under time delay measurement feedback and exogenous-based perturbation, Robust control design to the Furuta system under time delay measurement feedback and exogenous-based perturbation

  • Pujol Vázquez, Gisela|||0000-0003-0067-2571
  • Mobayen, Saleh
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
When dealing with real control experimentation, the designer has to take into account several uncertainties, such as: time variation of the system parameters, exogenous perturbation and the presence of time delay in the feedback line. In the later case, this time delay behaviour may be random, or chaotic. Hence, the control block has to be robust. In this work, a robust delay-dependent controller based on H8 theory is presented by employing the linear matrix inequalities techniques to design an efficient output feedback control. This approach is carefully tuned to face with random time-varying measurement feedback and applied to the Furuta pendulum subject to an exogenous ground perturbation. Therefore, a recent experimental platform is described. Here, the ground perturbation is realised using an Hexapod robotic system. According to experimental data, the proposed control approach is robust and the control objective is completely satisfied., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A Hysteresis dynamic mathematical model approach to parametric estimation system

  • Ponce de León Puig, Nubia Ilia|||0000-0003-2994-6388
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
  • Rodellar Benedé, José|||0000-0002-1514-7713
The main contribution of this paper is the proposal of a recent hysteresis dynamic model which is successfully employed within a posited signal modulator. The modulation of signals is a commonly required stage in many engineering applications, such as telecommunications, power electronics, and control, among others. In this paper, the effectiveness of a signal modulator based on the well-known Delta modulator when it contains a dynamic hysteresis system within its main structure is presented. To do that, it is resorted to an application of the granted Hysteresis-Delta Modulator. This application consists of including the modulator within an adaptive scheme, since it is well known that the persistent excitation condition is required, for instance, in parameter estimation tasks. Hence, the main functional property of the modulator with hysteresis is its ability of producing a modulated signal with uniform high-frequency content even when its input is not a permanent persistent excitation signal. To highlight the main contribution of this paper, a numerical experiment of a parameter estimation system is developed to compare the performance of the modulator with the proposed hysteresis model and two other previously reported hysteresis systems. That is, three different scenarios have been tested in the parameter estimation of a non-minimum phase system. Finally, the numerical experiments confirm that the proposed hysteresis model along with the modulator provides the best performance as expected., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Predictive control with dynamic hysteresis reference trajectory: application to a structural base-isolation model

  • Ponce de León Puig, Nubia Ilia|||0000-0003-2994-6388
  • Rodellar Benedé, José|||0000-0002-1514-7713
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
Over the last decades, in the field of control engineering, Model Predictive Control (MPC) has been successfully ¿employed in many industrial processes. This due to, among other aspects, its capability to include constrains within ¿the design control formulation and also its ability to perform on-line optimization. For instance, in the civil ¿engineering field, different MPC approaches have been well developed to formulate active control algorithms able ¿to reduce civil structural responses to earthquakes. Thus, in this paper, a customized version of a conventional ¿Predictive Control (PC) strategy is proposed to mitigate the displacement on a base-isolated system with a ¿nonlinear hysteresis behavior, that is excited by a seismic event. The proposal consists of including a dynamic ¿hysteresis system into the control scheme to generate a reference trajectory that will softly drive the base-isolated ¿structure to a rest status. The proposed control scheme is evaluated through numerical experiments, and then its ¿performance is compared with respect to the conventional Predictive Control methodology. According to the ¿numerical experiments, the approach here presented results more efficient than the conventional method due to ¿the use of a suitable linear model of the structural system plus a new Driver Block with dynamic hysteresis within ¿the Predictive Control scheme¿., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Advanced vibration control of large structures with distributed multi-actuator system and partial state information

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Rodellar Benedé, José|||0000-0002-1514-7713
In this paper, the design and performance of partial-state controllers with incomplete multi-actuation systems for the seismic protection of tall buildings is investigated. The proposed approach considers a partially instrumented multi-story building with an incomplete system of interstory force-actuation devices implemented at selected levels of the building, and an associated set of collocated sensors that measure the interstory drifts and velocities corresponding to the instrumented stories. The main elements of the proposed controller design methodology are presented by means of a twenty-story building with two different actuation schemes. For these control configurations, partial-state controllers are designed following a static output-feedback H8 controller design approach, and the corresponding frequency and time responses are investigated. The obtained results clearly indicate that the proposed partial-state controllers are effective in mitigating the building seismic response. They also show up that a suitable distribution of the instrumented stories is a relevant factor in the control system design., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Capítulo o parte de un libro (BookPart)

Anti-windup control of nonlinear cascade systems with particle swarm optimization parameter tuning

  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Serrano, Fernando E.
Assuming that many physical models can be decoupled, an anti-windup control scheme for nonlinear cascade systems is proposed. Taking into account that saturation appears frequently, in order to overcome this difficulty, an efficient control approach is developed. The paper is divided into two parts; First, the design of a cascade control system with dynamic controllers in the inner and outer loops, considering the closed-loop stability in the controller design with a suitable anti-windup compensator; Secondly, a PID cascade controller design in the inner and outer loop is presented, when the parameter tuning in both control schemes is done by particle swarm optimization (PSO). However, in this case, the implementation of an anti-windup compensator is not needed. Apart from the theoretical background, two numerical examples are shown to corroborate the provided results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An on-line statistic algorithm to fault detection in controlled systems: a study case

  • Ponce de León Puig, Nubia Ilia|||0000-0003-2994-6388
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
  • Rodellar Benedé, José|||0000-0002-1514-7713
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The main objective of this paper is to propose an on-line statistic algorithm for fault detection in non-linear dynamic systems based on data analysis. This discipline is a branch of the statistical science and it allows to organize information contained in a data set to make an inference about the origin of this information. Our strategy is founded in the common fault detection techniques based on system modeling. Basically, these techniques produce a residual signal, which is studied to identify when a fault occurs in a given system. In this paper, this residual signal is analyzed through a basic on-line statistic parameter: the variance. To fulfill our main objective, a healthy threshold is obtained such that if it is overcome, it can be assumed that a fault is detected. The fault may be, for instance, a change in a system's parameter. Our strategy is specifically applied to an adaptive predictive controlled base-isolated system. This controlled system is employed to mitigate vibration in buildings when an external seismic perturbation exists. Additionally, numerical experiments validate that the proposed fault detection strategy is functional when a modeled fault is inserted to the system. These numerical experiments are realized by employing four different real earthquake data and by using an artificial earthquake here developed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An effective strategy of real-time vision-based control for a Stewart platform

  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Vicente Rodrigo, Jesús|||0000-0002-8355-4783
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Barcons Xixons, Víctor|||0000-0002-2919-596X
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, A Stewart platform is a kind of parallel robot which can be used for a wide variety of technological and industrial applications. In this paper, a Stewart platform designed and assembled at the Universitat Polit`ecnica de Catalunya (UPC) by our research group is presented. The main objective is to overcome the enormous difficulties that arise when a real-time vision-based control of a fast moving object placed on these mechanisms is required. In addition, a description of its geometric characteristics, the calibration process, together with an illustrative experiment to demonstrate the good behavior of the platform is given.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A remote sensing scheme for fault diagnosis to wind turbines: an academic experimental set-up

  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
Nowadays, remote sensing for structural fault examination to wind turbines is an important technological challenger. On the other hand, laser diodes represent a low-cost option to implement a remote vibrometer sensor by just using cheap analog electronics. Therefore, a recent electronic circuit along with a laser diode is conceived to detect faults on a winding structure due to vibrations mainly induced by the wind and its rotary parts with possible mechanical defects. The electronic parts consist of a sequence of bandpass filters and peak detector stages. Besides, an academic experimental platform is constructed to validate the performance of the proposed remote sensing scheme for fault diagnosis in wind turbine structures., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A novel iterative linear matrix inequality design procedure for passive inter-substructure vibration control

  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
In vibration control of compound structures, inter-substructure damper (ISSD) systems exploit the out-of-phase response of different substructures to dissipate the kinetic vibrational energy by means of inter-substructure damping links. For seismic protection of multistory buildings, distributed sets of interstory fluid viscous dampers (FVDs) are ISSD systems of particular interest. The connections between distributed FVD systems and decentralized static output-feedback control allow using advanced controller-design methodologies to obtain passive ISSD systems with high-performance characteristics. A major issue of that approach is the computational dificulties associated to the numerical solution of optimization problems with structured bilinear matrix inequality constraints. In this work, we present a novel iterative linear matrix inequality procedure that can be applied to obtain enhanced suboptimal solutions for that kind of optimization problems. To demonstrate the effectiveness of the proposed methodology, we design a system of supplementary interstory FVDs for the seismic protection of a five-story building by synthesizing a decentralized static velocity-feedback H∞ controller. In the performance assessment, we compare the frequency-domain and time-domain responses of the designed FVD system with the behavior of the optimal static state-feedback H∞ controller. The obtained results indicate that the proposed approach allows designing passive ISSD systems that are capable to match the level of performance attained by optimal state-feedback active controllers., This research was partially supported by the Spanish Ministry of Economy and Competitiveness under Grant DPI2015-64170-R/FEDER and by the Italian Ministry of Education, University and Research under the Project “Department of Excellence LIS4.0—Lightweight and Smart Structures for Industry 4.0”, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optimal control of variable-speed wind turbines modeled as Markov jump systems

  • Vargas, Alessandro N.
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
This paper shows the solution for the control problem of operating wind turbines through Markov jump nonlinear systems. The idea is to represent wind speed acting on the turbine blades into modes of Markov chain. The main result then characterizes the optimal control for the long-run average cost of turbine operation. As a byproduct, the turbine model becomes second-moment stable, a concept borrowed from the literature of stochastic systems. To illustrate the benefits of our approach, we performed simulations in the FAST 5-MW wind turbine; the simulated data suggest that our control outperform other control strategies from the literature—increasing the produced power by 0.53%., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Advanced design of integrated vibration control systems for adjacent buildings under seismic excitations

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
In vibration control of adjacent buildings under seismic excitations, a twofold objective has to be considered: (i) to mitigate the vibrational response of the individual structures and (ii) to provide a suitable protection against interbuilding impacts (pounding). An interesting strategy to deal with this complex control problem consists in considering an integrated control system, which combines interbuilding actuation devices with local control systems implemented in the individual buildings. In this paper, an effective computational strategy to design this kind of integrated control systems is presented. The proposed design methodology is based on a linear matrix inequality formulation, allows including active and passive actuation devices, and makes it possible to deal with important information constraints associated to the problem. The main ideas are illustrated by means of a twobuilding systemequipped with three actuation devices: two interstory actuation devices implemented at the ground level of the buildings, plus an interbuilding actuation device installed at the top level of the lowest building. For this control setup, two different integrated controllers are designed. A proper set of numerical simulations is conducted to assess the performance of the proposed controllers with positive results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Novel results on decentralized H-infinity controller design for structural vibration control of large buildings

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
This is an Accepted Manuscript of a book chapter published by CRC Press in Insights and innovations in structural engineering, mechanics and computation: proceedings of the sixth International Conference on Structural Engineering, Mechanics and Computation, 5-7 September 2016, Cape Town, South Africa, available online: https://www.taylorfrancis.com/books/9781315641645, In this paper, we present a novel control design methodology for structural vibration control of large buildings. The main idea consists in decomposing the overall building system into decoupled single-story subsystems and modeling the subsystem interactions as external disturbances. Then, a complete set of local decentralized controllers can be efficiently computed using the existing LMI solvers. In the proposed approach, two different levels of decentralization can be distinguished: decentralized design and decentralized implementation, which are both of critical importance in large-scale control problems. From the design point of view, the local controllers are independently synthesized using only the low-dimensional subsystem models. The implementation phase is through the overall decentralized controller defined by the set of local controllers, which can drive the actuation devices using only local state-feedback information. To illustrate the proposed methodology, decentralized H8 controllers are designed for the seismic protection of a five-story building and a twenty-story building. A proper set of numerical simulations is carried out to demonstrate the effectiveness of the proposed decentralized controllers and the computation times are considered to assess the computational effectiveness of the decentralized design methodology., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Computational effectiveness of LMI design strategies for vibration control of large structures

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
Distributed control systems for vibration control of large structures involve a large number of actuation devices and sensors that work coordinately to produce the desired control actions. Design strategies based on linear matrix inequality (LMI) formulations allow obtaining controllers for these complex control problems, which are characterized by large dimensionality, high computational cost and severe information constraints. In this paper, we conduct a comparative study of the computational effectiveness of three different LMI-based controller design strategies: H-infinity, energy-to-peak and energy-to-componentwise-peak. The H-infinity approach is a well-known design methodology and has been widely used in the literature. The energy-to-peak approach is a particular case of generalized H2 design that is gaining a growing relevance in structural vibration control. Finally, the energy-to-componentwise-peak approach is a less common case of generalized H2 design that produces promising results among the three considered approaches. These controller design strategies are applied to synthesize active state-feedback controllers for the seismic protection of a five-story building and a twenty-story building both equipped with complete systems of interstory actuation devices. To evaluate the computational effectiveness of the proposed LMI design methodologies, the corresponding computation times are compared and a suitable set of numerical simulations is carried out to assess the performance of the obtained controllers. As positive results, two main facts can be highlighted: the computational effectiveness of the energy-to-peak control design strategy and the particularly well-balanced behavior exhibited by the energy-to-componentwise-peak controllers. On the negative side, it has to be mentioned the computational inefficiency of the considered LMI design methodologies to properly deal with very-large-scale control problems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Advanced computational design of shared tuned mass-inerter dampers for vibration control of adjacent multi-story structures

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
Inerters are a novel type of mechanical actuation devices that are able to produce large inertial forces with a relatively small mass. Due to this property, inerters can provide an effective solution to the main drawbacks of tuned mass-dampers and, consequently, they are gaining an increasing relevance in the field of passive structural vibration control. In this paper, a computational design strategy for inerter-based vibration control schemes is presented. The proposed approach combines a computationally effective reduced-frequency H8 cost-function and a constrained global optimization solver to design different configurations of a shared tuned mass-inerter-damper system for the seismic protection of a multi-story two-building structure. To assess the effectiveness of the obtained configurations, the frequency characteristics and the seismic response of the interstory drifts and interbuilding approaches are investigated with positive results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An effective computational design strategy for H-infinity vibration control of large structures with information constraints

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Reza Karimi, Hamid
In this paper, we present an effective computational strategy to design high-performance decentralized controllers with partial local-state information for vibration control of large building structures. Specifically, the building dynamical model is first decomposed into a set of approximate low-dimensional decoupled subsystems subject to the action of generalized disturbances, which include the effect of external physical disturbances, modeling approximation errors and mechanical subsystem interactions. Next, using the approximate decoupled subsystems, an overall structured state-feedback controller is obtained by designing a proper set of independent local controllers. The proposed computational strategy is applied to obtain two structured control systems for the seismic protection of a 35-story building: (i) a fully decentralized velocity-feedback controller with 35 interstory actuators that can be passively implemented by a set of viscous dampers, and (ii) a decentralized velocity-feedback controller with 15 interstory actuators, which can be implemented with a reduced set of collocated sensors and a system of five independent short-range communication networks. To assess the performance of the obtained structured controllers, the corresponding frequency and time responses are investigated and compared with the responses produced by optimal full-state H8H8 controllers. Moreover, to evaluate the effectiveness of the computational procedure, both structured and full-state controllers are designed for a proper set of buildings with different number of stories and the corresponding computation times are recorded and compared. The obtained results show that the computational cost of the proposed design methodology is remarkably low and also indicate that, despite the severe information constraints, the synthesized structured controllers are practically optimal., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A recent electronic control circuit to a throttle device

  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
  • Pujol Vázquez, Gisela|||0000-0003-0067-2571
  • Gibergans Bàguena, José|||0000-0002-6201-6353
The main objective of this paper is to conceive a recent electronic control circuit to the throttle device. The throttle mechanical actuator is the most important part in an automotive gasoline engine. Among the different control strategies recently reported, an easy to implement control scheme is an open research topic in the analog electronic engineering field. Hence, by using the nonlinear dwell switching control theory, an analog electronic control unit is proposed to manipulate an automotive throttle plate. Due to the switching mechanism is commuting between a stable and an unstable controllers, the resultant closed-loop system is enough robust to the control objective This fact is experimentally evidenced. The proposed electronic controller uses operational amplifiers along with an Arduino unit. This unit is just employed to generate the related switching signal that can be replaced by using, for instance, the timer IC555. Thus, this study is a contribution on design and realization of an electronic control circuit to the throttle device., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Diseño y construcción de un prototipo de plataforma Stewart

  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Blanes Priego, Manel
  • Vicente Rodrigo, Jesús|||0000-0002-8355-4783
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A proportional plus a hysteretic term control design: a throttle experimental emulation to wind turbines pitch control

  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
Pitch control is a relevant issue in wind turbines to properly operate the angle of the blades. Therefore, this control system pitches the blades usually a few degrees every time the wind changes in order to keep the rotor blades at the required angle thus controlling the rotational speed of the turbine. All the same time, the control of the pitch angle is not easy due to the system behavior being highly nonlinear. Consequently, the main objective of this paper is to depict an easy to implement control design based on a proportional controller and a hysteretic term to an emulator pitch control system in wind turbines. This emulator is just an automotive throttle device. This mechanical body dynamically captures some hard non-linearities presented in pitch wind turbine mechanisms, such as backlash, asymmetrical non-lineal effects, friction, and load variations. Even under strong non-linear effects that are difficult to model, a proportional controller and a hysteretic term may satisfy the main control design objective. Hence, a recent control design is developed and applied to a throttle system. We invoke the Lyapunov theory to confirm stability of the resultant closed-loop system. In addition, the proposed control approach is completely implemented by using operational amplifiers. Hence, no digital units are required at all. Moreover, the cost of the developed experimental platform and its outcomes are inexpensive. According to the experimental results, the controller performance seems acceptable, and validating of the control contribution too. For instance, a settling-time of about 0.03 s to a unit step-response is obtained., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hysteresis-based design of dynamic reference trajectories to avoid saturation in controlled wind turbines

  • Tutivén Gálvez, Christian|||0000-0001-6322-4608
  • Vidal Seguí, Yolanda|||0000-0003-4964-6948
  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
  • Rodellar Benedé, José|||0000-0002-1514-7713
The main objective of this paper is to design a dynamic reference trajectory based on hysteresis to avoid saturation in controlled wind turbines. Basically, the torque controller and pitch controller set-points are hysteretically manipulated to avoid saturation and drive the system with smooth dynamic changes. Simulation results obtained from a 5MW wind turbine benchmark model show that our proposed strategy has a clear added value with respect to the baseline controller (a well-known and accepted industrial wind turbine controller). Moreover, the proposed strategy has been tested in healthy conditions but also in the presence of a realistic fault where the baseline controller caused saturation to nally conduct to instability., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Complete kinematic analysis of the Stewart-Gough platform by unit quaternions

  • Serrano, Fernando E.
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
In this paper, a complete analysis of Stewart–Gough platform kinematics by unit quaternions is proposed. Even when unit quaternions have been implemented in different applications (including a kinematic analysis of the Stewart platform mechanism), the research regarding the application of this approach is limited only to the analysis of some issues related to the kinematic properties of this parallel mechanism. For this reason, a complete analysis of the Stewart–Gough platform is shown. The derivation of the inverse and forward kinematics of the Stewart platform using unit quaternions shows that they are suitable to represent the orientation of the upper platform due to their simplicity, equivalence, and compact representation as compared to rotation matrices. Then, the leg velocities are derived to compute these values under different conditions, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Capítulo o parte de un libro (BookPart)

Static output-feedback vibration control of seismically excited buildings: an effective multistep approach

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
Static output-feedback (SOF) controllers are particularly interesting for vibration control of complex structures under a multiactuation scheme. In this chapter, we present a novel iterative linear matrix inequality computational procedure that allows designing high-performance SOF controllers for vibration control of multistory buildings equipped with a distributed set of interstory actuators. The effectiveness of the proposed methodology is illustrated by designing an SOF H-infinity controller for the seismic protection of a 20-story building equipped with a complete set of interstory actuators and a system of collocated interstory-velocity sensors. Numerical simulations of the building response using a near-fault impulsive-type seismic disturbance demonstrate the high-performance characteristics of the obtained SOF controller and its robustness against broadband seismic excitations., This work was partially supported by the Spanish Ministry of Economy and Competitiveness under Grant DPI2015-64170-R (MINECO/FEDER)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An experimental platform for statistical fault diagnosis in propelled mechanical systems: an academic exercise

  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
  • Buenestado Caballero, Pablo|||0000-0003-3873-1362
Statistical data analysis for fault diagnosis in mechanical systems is a fundamental tool, for instance, in applied mechanical engineering. In order to capture a feasible data set, a well designed electronic instrumentation and excitation system signal stages are mandatory. Hence, one objective of this paper is to develop a low cost vibration sensor based on an inductive LC-tank oscillator (a resonant inductive-capacitive electronic circuit carefully designed to produce an harmonic electrical signal), and then to tune an effective excitation system signal to our experimental platform. This platform uses a propelled drone motor mounted on a beam structure to emulate a propelled rotating machine. Essentially, two data set were acquired. One for the healthy behaviour of the developed system, and the other for a programmed faulty scenario. This defective case was realized by introducing a small mechanical fault in one blade extreme of the mechanical propelled system. To note, this faulty scenario is almost impossible to deduce by just seen the raw data. The other objective of this paper is to analyze the obtained data sets by utilizing a statistical data analysis tool. Then, by employing box-plot diagrams, the healthy and faulty cases become evidenced. Finally, and due to we are proposing a low-cost academic experimental platform for fault diagnosis based on data analysis, our platform’s toll was around 120 euros. Hence, this platform results applicable to teach data analysis from dynamical systems, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

LMI-based design of distributed energy-dissipation systems for vibration control of large multi-story structures

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Reza Karimi, Hamid
In this paper, we present an advanced computational procedure that allows obtaining distributed energy-dissipation systems for large multi-story structures. The proposed methodology is based on a decentralized velocity-feedback energy-to-componentwise-peak (ECWP) controller design approach and can be formulated as a linear matrix inequality (LMI) optimization problem with structure constraints. To demonstrate the effectiveness of the proposed design methodology, a passive damping system is computed for the seismic protection of a 20-story building equipped with a complete set of interstory viscous dampers. The high-performance characteristics of the obtained passive ECWP control system are clearly evidenced by the numerical simulation results. Also, the computational effectiveness of the proposed design procedure is confirmed by the low computation time of the associated LMI optimization problem., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Distributed passive actuation schemes for seismic protection of multibuilding systems

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
In this paper, we investigate the design of distributed damping systems (DDSs) for the overall seismic protection of multiple adjacent buildings. The considered DDSs contain interstory dampers implemented inside the buildings and also interbuilding damping links. The design objectives include mitigating the buildings seismic response by reducing the interstory-drift and story-acceleration peak-values and producing small interbuilding approachings to decrease the risk of interbuilding collisions. Designing high-performance DDS configurations requires determining convenient damper positions and computing proper values for the damper parameters. That allocation-tuning optimization problem can pose serious computational difficulties for large-scale multibuilding systems. The design methodology proposed in this work—(i) is based on an effective matrix formulation of the damped multibuilding system; (ii) follows an H8 approach to define an objective function with fast-evaluation characteristics; (iii) exploits the computational advantages of the current state-of-the-art genetic algorithm solvers, including the usage of hybrid discrete-continuous optimization and parallel computing; and (iv) allows setting actuation schemes of particular interest such as full-linked configurations or nonactuated buildings. To illustrate the main features of the presented methodology, we consider a system of five adjacent multistory buildings and design three full-linked DDS configurations with a different number of actuated buildings. The obtained results confirm the flexibility and effectiveness of the proposed design approach and demonstrate the high-performance characteristics of the devised DDS configurations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Integrated design of hybrid interstory-interbuilding multi-actuation schemes for vibration control of adjacent buildings under seismic excitations

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Karimi, Hamid Reza
The design of vibration control systems for the seismic protection of closely adjacent buildings is a complex and challenging problem. In this paper, we consider distributed multi-actuation schemes that combine interbuilding linking elements and interstory actuation devices. Using an advanced static output-feedback H∞ approach, active and passive vibration control systems are designed for a multi-story two-building structure equipped with a selected set of linked and unlinked actuation schemes. To validate the effectiveness of the obtained controllers, the corresponding frequency responses are investigated and a proper set of numerical simulations is conducted using the full scale North–South El Centro 1940 seismic record as ground acceleration disturbance. The observed results indicate that using combined interstory-interbuilding multi-actuation schemes is an effective means of mitigating the vibrational response of the individual buildings and, simultaneously, reducing the risk of interbuilding pounding. These results also point out that passive control systems with high-performance characteristics can be designed using damping elements., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

A random signal generator by using analog electronics

  • Acho Zuppa, Leonardo|||0000-0002-4965-1133
The describing function theory is a powerful mathe matical tool to predict oscillations in non-linear dynam ical systems. This theory is here invoked to design a random signal generator and realized by using analog electronic elements. Then, and according to experimen tal results, histograms of the resultant signal are shown along with the generated signal in the time domain. Fi nally, the proposed electronic circuit is simple and cheap to construct, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Design of hybrid multi-actuation schemes for vibration control of adjacent twin structures

  • Palacios Quiñonero, Francisco|||0000-0002-1022-8880
  • Rubió Massegú, Josep|||0000-0002-6396-8022
  • Rossell Garriga, Josep Maria|||0000-0002-5631-5357
  • Rodellar Benedé, José|||0000-0002-1514-7713
In this paper, we present a control strategy for the seismic protection of adjacent twin buildings, which combines interbuilding actuation devices with an asymmetrical arrangement of interstory actuators. This kind of hybrid actuation schemes is able to simultaneously reduce the interbuilding approaching and the internal vibrational response of the buildings., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An effective strategy of real-time vision-based control for a Stewart platform

  • Rossell Garriga, Josep Maria
  • Vicente Rodrigo, Jesús
  • Rubió Massegú, Josep
  • Barcons Xixons, Víctor
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, A Stewart platform is a kind of parallel robot which can be used for a wide variety of technological and industrial applications. In this paper, a Stewart platform designed and assembled at the Universitat Polit`ecnica de Catalunya (UPC) by our research group is presented. The main objective is to overcome the enormous difficulties that arise when a real-time vision-based control of a fast moving object placed on these mechanisms is required. In addition, a description of its geometric characteristics, the calibration process, together with an illustrative experiment to demonstrate the good behavior of the platform is given., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Fault detection algorithm for wind turbines’ pitch actuator systems

  • Pujol Vázquez, Gisela
  • Acho Zuppa, Leonardo
  • Gibergans Bàguena, José
A fault detection innovation to wind turbines’ pitch actuators is an important subject to guarantee the efficiency wind energy conversion and long lifetime operation of these rotatory machines. Therefore, a recent and effective fault detection algorithm is conceived to detect faults on wind turbine pitch actuators. This approach is based on the interval observer framework theory that has proved to be an efficient tool to measure dynamic uncertainties in dynamical systems. It is evident that almost any fault in any actuator may affect its historical-time behavior. Hence, and properly conceptualized, a fault detection system can be successfully designed based on interval observer dynamics. This is precisely our main contribution. Additionally, we realize a numerical analysis to evaluate the performance of our approach by using a dynamic model of a pitch actuator device with faults. The numerical experiments support our main contribution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Robust control design to the Furuta system under time delay measurement feedback and exogenous-based perturbation, Robust control design to the Furuta system under time delay measurement feedback and exogenous-based perturbation

  • Pujol Vázquez, Gisela
  • Mobayen, Saleh
  • Acho Zuppa, Leonardo
When dealing with real control experimentation, the designer has to take into account several uncertainties, such as: time variation of the system parameters, exogenous perturbation and the presence of time delay in the feedback line. In the later case, this time delay behaviour may be random, or chaotic. Hence, the control block has to be robust. In this work, a robust delay-dependent controller based on H8 theory is presented by employing the linear matrix inequalities techniques to design an efficient output feedback control. This approach is carefully tuned to face with random time-varying measurement feedback and applied to the Furuta pendulum subject to an exogenous ground perturbation. Therefore, a recent experimental platform is described. Here, the ground perturbation is realised using an Hexapod robotic system. According to experimental data, the proposed control approach is robust and the control objective is completely satisfied., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Design of inerter-based multi-actuator systems for vibration control of adjacent structures

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
Distributed multi-actuator systems can provide effective solutions for mitigating the vibrational response of large structures. In this paper, we present a computational strategy to design inerter-based multi-actuation systems for the seismic protection of adjacent structures. The proposed approach allows considering both interstory and interbuilding Tuned Mass-Inerter Damper (TMID) actuators, and aims at simultaneously reducing the vibrational response of the individual buildings and avoiding the interbuilding impacts. The tuning procedure is based on an H8 cost-function and uses a constrained global-optimization solver to compute parameter configurations with high-performance characteristics. To illustrate the main features of this work, two different Tuned Inerter Damper (TID) multi-actuator schemes are considered for the seismic protection of a particular multi-story two-building system. A multi-actuator Tuned Mass Damper (TMD) system is also designed and is taken as a reference in the performance assessment. The obtained results demonstrate the flexibility and effectiveness of the proposed design methodology, and clearly show the superior performance and robustness of the TID actuation systems., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Integrated design of hybrid interstory-interbuilding multi-actuation schemes for vibration control of adjacent buildings under seismic excitations

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
The design of vibration control systems for the seismic protection of closely adjacent buildings is a complex and challenging problem. In this paper, we consider distributed multi-actuation schemes that combine interbuilding linking elements and interstory actuation devices. Using an advanced static output-feedback H∞ approach, active and passive vibration control systems are designed for a multi-story two-building structure equipped with a selected set of linked and unlinked actuation schemes. To validate the effectiveness of the obtained controllers, the corresponding frequency responses are investigated and a proper set of numerical simulations is conducted using the full scale North–South El Centro 1940 seismic record as ground acceleration disturbance. The observed results indicate that using combined interstory-interbuilding multi-actuation schemes is an effective means of mitigating the vibrational response of the individual buildings and, simultaneously, reducing the risk of interbuilding pounding. These results also point out that passive control systems with high-performance characteristics can be designed using damping elements., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A recent electronic control circuit to a throttle device

  • Acho Zuppa, Leonardo
  • Pujol Vázquez, Gisela
  • Gibergans Bàguena, José
The main objective of this paper is to conceive a recent electronic control circuit to the throttle device. The throttle mechanical actuator is the most important part in an automotive gasoline engine. Among the different control strategies recently reported, an easy to implement control scheme is an open research topic in the analog electronic engineering field. Hence, by using the nonlinear dwell switching control theory, an analog electronic control unit is proposed to manipulate an automotive throttle plate. Due to the switching mechanism is commuting between a stable and an unstable controllers, the resultant closed-loop system is enough robust to the control objective This fact is experimentally evidenced. The proposed electronic controller uses operational amplifiers along with an Arduino unit. This unit is just employed to generate the related switching signal that can be replaced by using, for instance, the timer IC555. Thus, this study is a contribution on design and realization of an electronic control circuit to the throttle device., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Static output-feedback vibration control of seismically excited buildings: an effective multistep approach

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
Static output-feedback (SOF) controllers are particularly interesting for vibration control of complex structures under a multiactuation scheme. In this chapter, we present a novel iterative linear matrix inequality computational procedure that allows designing high-performance SOF controllers for vibration control of multistory buildings equipped with a distributed set of interstory actuators. The effectiveness of the proposed methodology is illustrated by designing an SOF H-infinity controller for the seismic protection of a 20-story building equipped with a complete set of interstory actuators and a system of collocated interstory-velocity sensors. Numerical simulations of the building response using a near-fault impulsive-type seismic disturbance demonstrate the high-performance characteristics of the obtained SOF controller and its robustness against broadband seismic excitations., This work was partially supported by the Spanish Ministry of Economy and Competitiveness under Grant DPI2015-64170-R (MINECO/FEDER)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optimal control of variable-speed wind turbines modeled as Markov jump systems

  • Vargas, Alessandro N.
  • Acho Zuppa, Leonardo
This paper shows the solution for the control problem of operating wind turbines through Markov jump nonlinear systems. The idea is to represent wind speed acting on the turbine blades into modes of Markov chain. The main result then characterizes the optimal control for the long-run average cost of turbine operation. As a byproduct, the turbine model becomes second-moment stable, a concept borrowed from the literature of stochastic systems. To illustrate the benefits of our approach, we performed simulations in the FAST 5-MW wind turbine; the simulated data suggest that our control outperform other control strategies from the literature—increasing the produced power by 0.53%., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Design of hybrid multi-actuation schemes for vibration control of adjacent twin structures

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Rodellar Benedé, José
In this paper, we present a control strategy for the seismic protection of adjacent twin buildings, which combines interbuilding actuation devices with an asymmetrical arrangement of interstory actuators. This kind of hybrid actuation schemes is able to simultaneously reduce the interbuilding approaching and the internal vibrational response of the buildings., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An on-line statistic algorithm to fault detection in controlled systems: a study case

  • Ponce de León Puig, Nubia Ilia
  • Acho Zuppa, Leonardo
  • Rodellar Benedé, José
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The main objective of this paper is to propose an on-line statistic algorithm for fault detection in non-linear dynamic systems based on data analysis. This discipline is a branch of the statistical science and it allows to organize information contained in a data set to make an inference about the origin of this information. Our strategy is founded in the common fault detection techniques based on system modeling. Basically, these techniques produce a residual signal, which is studied to identify when a fault occurs in a given system. In this paper, this residual signal is analyzed through a basic on-line statistic parameter: the variance. To fulfill our main objective, a healthy threshold is obtained such that if it is overcome, it can be assumed that a fault is detected. The fault may be, for instance, a change in a system's parameter. Our strategy is specifically applied to an adaptive predictive controlled base-isolated system. This controlled system is employed to mitigate vibration in buildings when an external seismic perturbation exists. Additionally, numerical experiments validate that the proposed fault detection strategy is functional when a modeled fault is inserted to the system. These numerical experiments are realized by employing four different real earthquake data and by using an artificial earthquake here developed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Novel results on decentralized H-infinity controller design for structural vibration control of large buildings

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
This is an Accepted Manuscript of a book chapter published by CRC Press in Insights and innovations in structural engineering, mechanics and computation: proceedings of the sixth International Conference on Structural Engineering, Mechanics and Computation, 5-7 September 2016, Cape Town, South Africa, available online: https://www.taylorfrancis.com/books/9781315641645, In this paper, we present a novel control design methodology for structural vibration control of large buildings. The main idea consists in decomposing the overall building system into decoupled single-story subsystems and modeling the subsystem interactions as external disturbances. Then, a complete set of local decentralized controllers can be efficiently computed using the existing LMI solvers. In the proposed approach, two different levels of decentralization can be distinguished: decentralized design and decentralized implementation, which are both of critical importance in large-scale control problems. From the design point of view, the local controllers are independently synthesized using only the low-dimensional subsystem models. The implementation phase is through the overall decentralized controller defined by the set of local controllers, which can drive the actuation devices using only local state-feedback information. To illustrate the proposed methodology, decentralized H8 controllers are designed for the seismic protection of a five-story building and a twenty-story building. A proper set of numerical simulations is carried out to demonstrate the effectiveness of the proposed decentralized controllers and the computation times are considered to assess the computational effectiveness of the decentralized design methodology., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Diseño y construcción de un prototipo de plataforma Stewart

Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Computational effectiveness of LMI design strategies for vibration control of large structures

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
Distributed control systems for vibration control of large structures involve a large number of actuation devices and sensors that work coordinately to produce the desired control actions. Design strategies based on linear matrix inequality (LMI) formulations allow obtaining controllers for these complex control problems, which are characterized by large dimensionality, high computational cost and severe information constraints. In this paper, we conduct a comparative study of the computational effectiveness of three different LMI-based controller design strategies: H-infinity, energy-to-peak and energy-to-componentwise-peak. The H-infinity approach is a well-known design methodology and has been widely used in the literature. The energy-to-peak approach is a particular case of generalized H2 design that is gaining a growing relevance in structural vibration control. Finally, the energy-to-componentwise-peak approach is a less common case of generalized H2 design that produces promising results among the three considered approaches. These controller design strategies are applied to synthesize active state-feedback controllers for the seismic protection of a five-story building and a twenty-story building both equipped with complete systems of interstory actuation devices. To evaluate the computational effectiveness of the proposed LMI design methodologies, the corresponding computation times are compared and a suitable set of numerical simulations is carried out to assess the performance of the obtained controllers. As positive results, two main facts can be highlighted: the computational effectiveness of the energy-to-peak control design strategy and the particularly well-balanced behavior exhibited by the energy-to-componentwise-peak controllers. On the negative side, it has to be mentioned the computational inefficiency of the considered LMI design methodologies to properly deal with very-large-scale control problems., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Advanced computational design of shared tuned mass-inerter dampers for vibration control of adjacent multi-story structures

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
Inerters are a novel type of mechanical actuation devices that are able to produce large inertial forces with a relatively small mass. Due to this property, inerters can provide an effective solution to the main drawbacks of tuned mass-dampers and, consequently, they are gaining an increasing relevance in the field of passive structural vibration control. In this paper, a computational design strategy for inerter-based vibration control schemes is presented. The proposed approach combines a computationally effective reduced-frequency H8 cost-function and a constrained global optimization solver to design different configurations of a shared tuned mass-inerter-damper system for the seismic protection of a multi-story two-building structure. To assess the effectiveness of the obtained configurations, the frequency characteristics and the seismic response of the interstory drifts and interbuilding approaches are investigated with positive results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Interstory-interbuilding actuation schemes for seismic protection of adjacent identical buildings

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Rodellar Benedé, José
Rows of closely adjacent buildings with similar dynamic characteristics are common building arrangements in residential areas. In this paper, we present a vibration control strategy for the seismic protection of this kind of multibuilding systems. The proposed approach uses an advanced Linear Matrix Inequality (LMI) computational procedure to carry out the integrated design of distributed multiactuation schemes that combine interbuilding linking devices with interstory actuators implemented at different levels of the buildings. The controller designs are formulated as static output-feedback H-infinity control problems that include the interstory drifts, interbuilding approachings and control efforts as controlled-output variables. The advantages of the LMI computational procedure are also exploited to design a fully-decentralized velocity-feedback controller, which can define a passive control system with high-performance characteristics. The main ideas are presented by means of a system of three adjacent five-story identical buildings, and a proper set of numerical simulations are conducted to demonstrate the behavior of the different control configurations. The obtained results indicate that interstory-interbuilding multiactuation schemes can be used to design effective vibration control systems for adjacent buildings with similar dynamic characteristics. Specifically, this kind of control systems is able to mitigate the vibrational response of the individual buildings while maintaining reduced levels of pounding risk., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A novel iterative linear matrix inequality design procedure for passive inter-substructure vibration control

  • Rubió Massegú, Josep
  • Palacios Quiñonero, Francisco
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
In vibration control of compound structures, inter-substructure damper (ISSD) systems exploit the out-of-phase response of different substructures to dissipate the kinetic vibrational energy by means of inter-substructure damping links. For seismic protection of multistory buildings, distributed sets of interstory fluid viscous dampers (FVDs) are ISSD systems of particular interest. The connections between distributed FVD systems and decentralized static output-feedback control allow using advanced controller-design methodologies to obtain passive ISSD systems with high-performance characteristics. A major issue of that approach is the computational dificulties associated to the numerical solution of optimization problems with structured bilinear matrix inequality constraints. In this work, we present a novel iterative linear matrix inequality procedure that can be applied to obtain enhanced suboptimal solutions for that kind of optimization problems. To demonstrate the effectiveness of the proposed methodology, we design a system of supplementary interstory FVDs for the seismic protection of a five-story building by synthesizing a decentralized static velocity-feedback H∞ controller. In the performance assessment, we compare the frequency-domain and time-domain responses of the designed FVD system with the behavior of the optimal static state-feedback H∞ controller. The obtained results indicate that the proposed approach allows designing passive ISSD systems that are capable to match the level of performance attained by optimal state-feedback active controllers., This research was partially supported by the Spanish Ministry of Economy and Competitiveness under Grant DPI2015-64170-R/FEDER and by the Italian Ministry of Education, University and Research under the Project “Department of Excellence LIS4.0—Lightweight and Smart Structures for Industry 4.0”, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A remote sensing scheme for fault diagnosis to wind turbines: an academic experimental set-up

  • Acho Zuppa, Leonardo
Nowadays, remote sensing for structural fault examination to wind turbines is an important technological challenger. On the other hand, laser diodes represent a low-cost option to implement a remote vibrometer sensor by just using cheap analog electronics. Therefore, a recent electronic circuit along with a laser diode is conceived to detect faults on a winding structure due to vibrations mainly induced by the wind and its rotary parts with possible mechanical defects. The electronic parts consist of a sequence of bandpass filters and peak detector stages. Besides, an academic experimental platform is constructed to validate the performance of the proposed remote sensing scheme for fault diagnosis in wind turbine structures., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Rotary inverted pendulum with magnetically external perturbations as a source of the pendulum’s base navigation commands

  • Pujol Vázquez, Gisela
  • Acho Zuppa, Leonardo
  • Mobayen, Saleh
  • Nápoles Alberro, Amelia
  • Perez Gracia, Vega
The main objective of this paper is to drive a rotary inverted pendulum by following a desired navigation instruction. This navigation is commanded by the user through a new electromagnetic device which is allowed to perturb the pendulum from its upright position. This apparatus consists of an electronic magnetic driving circuit to introduce commands and realized via two operated magnetic coils. So, the external programmed magnetic perturbation can be seen as external commandments. Therefore, the control problem statement is solved via a modified regulation control implementation, to maintain the pendulum on its upright position and giving free manipulation of the base of the rotary inverted pendulum. Hence, by using the corresponding H8-linear matrix inequality technique, a static state controller is designed and tested experimentally so supporting our findings., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A random signal generator by using analog electronics

  • Acho Zuppa, Leonardo
The describing function theory is a powerful mathe matical tool to predict oscillations in non-linear dynam ical systems. This theory is here invoked to design a random signal generator and realized by using analog electronic elements. Then, and according to experimen tal results, histograms of the resultant signal are shown along with the generated signal in the time domain. Fi nally, the proposed electronic circuit is simple and cheap to construct, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Advanced vibration control of large structures with distributed multi-actuator system and partial state information

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Rodellar Benedé, José
In this paper, the design and performance of partial-state controllers with incomplete multi-actuation systems for the seismic protection of tall buildings is investigated. The proposed approach considers a partially instrumented multi-story building with an incomplete system of interstory force-actuation devices implemented at selected levels of the building, and an associated set of collocated sensors that measure the interstory drifts and velocities corresponding to the instrumented stories. The main elements of the proposed controller design methodology are presented by means of a twenty-story building with two different actuation schemes. For these control configurations, partial-state controllers are designed following a static output-feedback H8 controller design approach, and the corresponding frequency and time responses are investigated. The obtained results clearly indicate that the proposed partial-state controllers are effective in mitigating the building seismic response. They also show up that a suitable distribution of the instrumented stories is a relevant factor in the control system design., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An effective computational design strategy for H-infinity vibration control of large structures with information constraints

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Reza Karimi, Hamid
In this paper, we present an effective computational strategy to design high-performance decentralized controllers with partial local-state information for vibration control of large building structures. Specifically, the building dynamical model is first decomposed into a set of approximate low-dimensional decoupled subsystems subject to the action of generalized disturbances, which include the effect of external physical disturbances, modeling approximation errors and mechanical subsystem interactions. Next, using the approximate decoupled subsystems, an overall structured state-feedback controller is obtained by designing a proper set of independent local controllers. The proposed computational strategy is applied to obtain two structured control systems for the seismic protection of a 35-story building: (i) a fully decentralized velocity-feedback controller with 35 interstory actuators that can be passively implemented by a set of viscous dampers, and (ii) a decentralized velocity-feedback controller with 15 interstory actuators, which can be implemented with a reduced set of collocated sensors and a system of five independent short-range communication networks. To assess the performance of the obtained structured controllers, the corresponding frequency and time responses are investigated and compared with the responses produced by optimal full-state H8H8 controllers. Moreover, to evaluate the effectiveness of the computational procedure, both structured and full-state controllers are designed for a proper set of buildings with different number of stories and the corresponding computation times are recorded and compared. The obtained results show that the computational cost of the proposed design methodology is remarkably low and also indicate that, despite the severe information constraints, the synthesized structured controllers are practically optimal., Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybrid passivity based and fuzzy type-2 controller for chaotic and hyper-chaotic systems

  • Serrano, Fernando E.
  • Rossell Garriga, Josep Maria
In this paper a hybrid passivity based and fuzzy type-2 controller for chaotic and hyper-chaotic systems is presented. The proposed control strategy is an appropriate choice to be implemented for the stabilization of chaotic and hyper-chaotic systems due to the energy considerations of the passivity based controller and the flexibility and capability of the fuzzy type-2 controller to deal with uncertainties. As it is known, chaotic systems are those kinds of systems in which one of their Lyapunov exponents is real positive, and hyper-chaotic systems are those kinds of systems in which more than one Lyapunov exponents are real positive. In this article one chaotic Lorentz attractor and one four dimensions hyper-chaotic system are considered to be stabilized with the proposed control strategy. It is proved that both systems are stabilized by the passivity based and fuzzy type-2 controller, in which a control law is designed according to the energy considerations selecting an appropriate storage function to meet the passivity conditions. The fuzzy type-2 controller part is designed in order to behave as a state feedback controller, exploiting the flexibility and the capability to deal with uncertainties. This work begins with the stability analysis of the chaotic Lorentz attractor and a four dimensions hyper-chaotic system. The rest of the paper deals with the design of the proposed control strategy for both systems in order to design an appropriate controller that meets the design requirements. Finally, numerical simulations are done to corroborate the obtained theoretical results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An iterative linear matrix inequality controller-design strategy for H-infinity structural vibration control

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Reza Karimi, Hamid
This is an Accepted Manuscript of a book chapter published by Routledge/CRC Press in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications on 21 August 2019, available online: https://www.taylorfrancis.com/books/9780429426506, In this paper, we present a novel Iterative Linear Inequality (ILMI) strategy for controller design that makes it possible to compute suboptimal H-infinity static output-feedback (SOF) controllers with high-performance characteristics. The obtained SOF controllers can be effective in reducing the vibrational response of multi-degree-of-freedom structures subjected to broad-band excitations. To demonstrate the effectiveness of the proposed methodology, a SOF controller is designed for the seismic protection of a multi-actuated five-story shear-frame structure with positive result., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An experimental platform for statistical fault diagnosis in propelled mechanical systems: an academic exercise

  • Acho Zuppa, Leonardo
  • Buenestado Caballero, Pablo
Statistical data analysis for fault diagnosis in mechanical systems is a fundamental tool, for instance, in applied mechanical engineering. In order to capture a feasible data set, a well designed electronic instrumentation and excitation system signal stages are mandatory. Hence, one objective of this paper is to develop a low cost vibration sensor based on an inductive LC-tank oscillator (a resonant inductive-capacitive electronic circuit carefully designed to produce an harmonic electrical signal), and then to tune an effective excitation system signal to our experimental platform. This platform uses a propelled drone motor mounted on a beam structure to emulate a propelled rotating machine. Essentially, two data set were acquired. One for the healthy behaviour of the developed system, and the other for a programmed faulty scenario. This defective case was realized by introducing a small mechanical fault in one blade extreme of the mechanical propelled system. To note, this faulty scenario is almost impossible to deduce by just seen the raw data. The other objective of this paper is to analyze the obtained data sets by utilizing a statistical data analysis tool. Then, by employing box-plot diagrams, the healthy and faulty cases become evidenced. Finally, and due to we are proposing a low-cost academic experimental platform for fault diagnosis based on data analysis, our platform’s toll was around 120 euros. Hence, this platform results applicable to teach data analysis from dynamical systems, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Magnetic bearing for wind turbine power generator shaft: an emulator prototype design for vibration control

  • Palacios Quiñonero, Francisco
  • Acho Zuppa, Leonardo
  • Rossell Garriga, Josep Maria
  • Reza Karimi, Hamid
The objective of this work is to present a practical demonstration of the relevant role that can be played by micro-sized wind turbines (µSWTs) in research and education. To this end, we have designed an experimental platform for active magnetic bearing vibration control of a rotary shaft, which provides an excellent illustration of the mechatronical multidomain approach and, at the same time, makes it possible to perform advanced full-scale experimental studies on fundamental aspects of µSWTs, such as vibration control, fault detection or health monitoring. The platform prototype has been designed following the principles of cost-efficiency and limited usage of resources, which can be critical factors for its practical application. To illustrate the effectiveness of the proposed approach, a simple vibration control strategy has been implemented using a low-cost digital microcontroller., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

LMI-based design of distributed energy-dissipation systems for vibration control of large multi-story structures

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Reza Karimi, Hamid
In this paper, we present an advanced computational procedure that allows obtaining distributed energy-dissipation systems for large multi-story structures. The proposed methodology is based on a decentralized velocity-feedback energy-to-componentwise-peak (ECWP) controller design approach and can be formulated as a linear matrix inequality (LMI) optimization problem with structure constraints. To demonstrate the effectiveness of the proposed design methodology, a passive damping system is computed for the seismic protection of a 20-story building equipped with a complete set of interstory viscous dampers. The high-performance characteristics of the obtained passive ECWP control system are clearly evidenced by the numerical simulation results. Also, the computational effectiveness of the proposed design procedure is confirmed by the low computation time of the associated LMI optimization problem., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Advanced design of integrated vibration control systems for adjacent buildings under seismic excitations

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
In vibration control of adjacent buildings under seismic excitations, a twofold objective has to be considered: (i) to mitigate the vibrational response of the individual structures and (ii) to provide a suitable protection against interbuilding impacts (pounding). An interesting strategy to deal with this complex control problem consists in considering an integrated control system, which combines interbuilding actuation devices with local control systems implemented in the individual buildings. In this paper, an effective computational strategy to design this kind of integrated control systems is presented. The proposed design methodology is based on a linear matrix inequality formulation, allows including active and passive actuation devices, and makes it possible to deal with important information constraints associated to the problem. The main ideas are illustrated by means of a twobuilding systemequipped with three actuation devices: two interstory actuation devices implemented at the ground level of the buildings, plus an interbuilding actuation device installed at the top level of the lowest building. For this control setup, two different integrated controllers are designed. A proper set of numerical simulations is conducted to assess the performance of the proposed controllers with positive results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hysteresis-based design of dynamic reference trajectories to avoid saturation in controlled wind turbines

  • Tutivén Gálvez, Christian
  • Vidal Seguí, Yolanda
  • Acho Zuppa, Leonardo
  • Rodellar Benedé, José
The main objective of this paper is to design a dynamic reference trajectory based on hysteresis to avoid saturation in controlled wind turbines. Basically, the torque controller and pitch controller set-points are hysteretically manipulated to avoid saturation and drive the system with smooth dynamic changes. Simulation results obtained from a 5MW wind turbine benchmark model show that our proposed strategy has a clear added value with respect to the baseline controller (a well-known and accepted industrial wind turbine controller). Moreover, the proposed strategy has been tested in healthy conditions but also in the presence of a realistic fault where the baseline controller caused saturation to nally conduct to instability., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Design of distributed multi-actuator systems with incomplete state information for vibration control of large structures

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Rodellar Benedé, José
In this paper, we investigate the design and performance of static feedback controllers with partial-state information for the seismic protection of tall buildings equipped with incomplete multi-actuation systems. The proposed approach considers a partially instrumented multi-story building with an incomplete system of interstory force–actuation devices implemented on selected levels of the building, and an associated set of collocated sensors that measure the corresponding interstory drifts and interstory velocities. The main elements of the proposed controller design methodology are presented by means of a twenty-story building equipped with a system of ten interstory actuators arranged in three different layouts: concentrated, semi-distributed and fully-distributed. For these control configurations, partial-state controllers are designed following a static output-feedback H-infinity controller design approach, and the corresponding frequency and time responses are investigated. The obtained results clearly indicate that the proposed partial-state controllers are effective in mitigating the building seismic response. They also show that a suitable distribution of the instrumented stories is a relevant factor in the control system performance., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A remote sensing scheme for fault diagnosis to wind turbines: an academic experimental set-up

  • Acho Zuppa, Leonardo
Nowadays, remote sensing for structural fault examination to wind turbines is an important technological challenger. On the other hand, laser diodes represent a low-cost option to implement a remote vibrometer sensor by just using cheap analog electronics. Therefore, a recent electronic circuit along with a laser diode is conceived to detect faults on a winding structure due to vibrations mainly induced by the wind and its rotary parts with possible mechanical defects. The electronic parts consist of a sequence of bandpass filters and peak detector stages. Besides, an academic experimental platform is constructed to validate the performance of the proposed remote sensing scheme for fault diagnosis in wind turbine structures., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A Hysteresis dynamic mathematical model approach to parametric estimation system

  • Ponce de León Puig, Nubia Ilia
  • Acho Zuppa, Leonardo
  • Rodellar Benedé, José
The main contribution of this paper is the proposal of a recent hysteresis dynamic model which is successfully employed within a posited signal modulator. The modulation of signals is a commonly required stage in many engineering applications, such as telecommunications, power electronics, and control, among others. In this paper, the effectiveness of a signal modulator based on the well-known Delta modulator when it contains a dynamic hysteresis system within its main structure is presented. To do that, it is resorted to an application of the granted Hysteresis-Delta Modulator. This application consists of including the modulator within an adaptive scheme, since it is well known that the persistent excitation condition is required, for instance, in parameter estimation tasks. Hence, the main functional property of the modulator with hysteresis is its ability of producing a modulated signal with uniform high-frequency content even when its input is not a permanent persistent excitation signal. To highlight the main contribution of this paper, a numerical experiment of a parameter estimation system is developed to compare the performance of the modulator with the proposed hysteresis model and two other previously reported hysteresis systems. That is, three different scenarios have been tested in the parameter estimation of a non-minimum phase system. Finally, the numerical experiments confirm that the proposed hysteresis model along with the modulator provides the best performance as expected., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Anti-windup control of nonlinear cascade systems with particle swarm optimization parameter tuning

  • Rossell Garriga, Josep Maria
  • Serrano, Fernando E.
Assuming that many physical models can be decoupled, an anti-windup control scheme for nonlinear cascade systems is proposed. Taking into account that saturation appears frequently, in order to overcome this difficulty, an efficient control approach is developed. The paper is divided into two parts; First, the design of a cascade control system with dynamic controllers in the inner and outer loops, considering the closed-loop stability in the controller design with a suitable anti-windup compensator; Secondly, a PID cascade controller design in the inner and outer loop is presented, when the parameter tuning in both control schemes is done by particle swarm optimization (PSO). However, in this case, the implementation of an anti-windup compensator is not needed. Apart from the theoretical background, two numerical examples are shown to corroborate the provided results., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Complete kinematic analysis of the Stewart-Gough platform by unit quaternions

  • Serrano, Fernando E.
  • Rossell Garriga, Josep Maria
In this paper, a complete analysis of Stewart–Gough platform kinematics by unit quaternions is proposed. Even when unit quaternions have been implemented in different applications (including a kinematic analysis of the Stewart platform mechanism), the research regarding the application of this approach is limited only to the analysis of some issues related to the kinematic properties of this parallel mechanism. For this reason, a complete analysis of the Stewart–Gough platform is shown. The derivation of the inverse and forward kinematics of the Stewart platform using unit quaternions shows that they are suitable to represent the orientation of the upper platform due to their simplicity, equivalence, and compact representation as compared to rotation matrices. Then, the leg velocities are derived to compute these values under different conditions, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Predictive control with dynamic hysteresis reference trajectory: application to a structural base-isolation model

  • Ponce de León Puig, Nubia Ilia
  • Rodellar Benedé, José
  • Acho Zuppa, Leonardo
Over the last decades, in the field of control engineering, Model Predictive Control (MPC) has been successfully ¿employed in many industrial processes. This due to, among other aspects, its capability to include constrains within ¿the design control formulation and also its ability to perform on-line optimization. For instance, in the civil ¿engineering field, different MPC approaches have been well developed to formulate active control algorithms able ¿to reduce civil structural responses to earthquakes. Thus, in this paper, a customized version of a conventional ¿Predictive Control (PC) strategy is proposed to mitigate the displacement on a base-isolated system with a ¿nonlinear hysteresis behavior, that is excited by a seismic event. The proposal consists of including a dynamic ¿hysteresis system into the control scheme to generate a reference trajectory that will softly drive the base-isolated ¿structure to a rest status. The proposed control scheme is evaluated through numerical experiments, and then its ¿performance is compared with respect to the conventional Predictive Control methodology. According to the ¿numerical experiments, the approach here presented results more efficient than the conventional method due to ¿the use of a suitable linear model of the structural system plus a new Driver Block with dynamic hysteresis within ¿the Predictive Control scheme¿., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A proportional plus a hysteretic term control design: a throttle experimental emulation to wind turbines pitch control

  • Acho Zuppa, Leonardo
Pitch control is a relevant issue in wind turbines to properly operate the angle of the blades. Therefore, this control system pitches the blades usually a few degrees every time the wind changes in order to keep the rotor blades at the required angle thus controlling the rotational speed of the turbine. All the same time, the control of the pitch angle is not easy due to the system behavior being highly nonlinear. Consequently, the main objective of this paper is to depict an easy to implement control design based on a proportional controller and a hysteretic term to an emulator pitch control system in wind turbines. This emulator is just an automotive throttle device. This mechanical body dynamically captures some hard non-linearities presented in pitch wind turbine mechanisms, such as backlash, asymmetrical non-lineal effects, friction, and load variations. Even under strong non-linear effects that are difficult to model, a proportional controller and a hysteretic term may satisfy the main control design objective. Hence, a recent control design is developed and applied to a throttle system. We invoke the Lyapunov theory to confirm stability of the resultant closed-loop system. In addition, the proposed control approach is completely implemented by using operational amplifiers. Hence, no digital units are required at all. Moreover, the cost of the developed experimental platform and its outcomes are inexpensive. According to the experimental results, the controller performance seems acceptable, and validating of the control contribution too. For instance, a settling-time of about 0.03 s to a unit step-response is obtained., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Distributed passive actuation schemes for seismic protection of multibuilding systems

  • Palacios Quiñonero, Francisco
  • Rubió Massegú, Josep
  • Rossell Garriga, Josep Maria
  • Karimi, Hamid Reza
In this paper, we investigate the design of distributed damping systems (DDSs) for the overall seismic protection of multiple adjacent buildings. The considered DDSs contain interstory dampers implemented inside the buildings and also interbuilding damping links. The design objectives include mitigating the buildings seismic response by reducing the interstory-drift and story-acceleration peak-values and producing small interbuilding approachings to decrease the risk of interbuilding collisions. Designing high-performance DDS configurations requires determining convenient damper positions and computing proper values for the damper parameters. That allocation-tuning optimization problem can pose serious computational difficulties for large-scale multibuilding systems. The design methodology proposed in this work—(i) is based on an effective matrix formulation of the damped multibuilding system; (ii) follows an H8 approach to define an objective function with fast-evaluation characteristics; (iii) exploits the computational advantages of the current state-of-the-art genetic algorithm solvers, including the usage of hybrid discrete-continuous optimization and parallel computing; and (iv) allows setting actuation schemes of particular interest such as full-linked configurations or nonactuated buildings. To illustrate the main features of the presented methodology, we consider a system of five adjacent multistory buildings and design three full-linked DDS configurations with a different number of actuated buildings. The obtained results confirm the flexibility and effectiveness of the proposed design approach and demonstrate the high-performance characteristics of the devised DDS configurations., Peer Reviewed, Postprint (published version)