Skip to main content

APLICACION DE TECNICAS OPTICAS AVANZADAS PARA EL ESTUDIO DE PROCESOS DE MEZCLA Y TRANSPORTE EN FLUJOS MONO Y MULTIFASE COMPLEJOS

DPI2016-75791-C2-2-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Experimental Analysis of Gas–Liquid–Solid Three-Phase Flows in Horizontal Pipelines

  • Sassi, Paolo
  • Stiriba, Youssef
  • Lobera, Julia
  • Palero, Virginia
  • Pallarès, Jordi
The dynamics of three-phase flows involves phenomena of high complexity whose characterization is of great interest for different sectors of the worldwide industry. In order to move forward in the fundamental knowledge of the behavior of three-phase flows, new experimental data has been obtained in a facility specially designed for flow visualization and for measuring key parameters. These are (1) the flow regime, (2) the superficial velocities or rates of the individual phases; and (3) the frictional pressure loss. Flow visualization and pressure measurements are performed for two and three-phase flows in horizontal 30 mm inner diameter and 4.5 m long transparent acrylic pipes. A total of 134 flow conditions are analyzed and presented, including plug and slug flows in air–water two-phase flows and air–water-polypropylene (pellets) three-phase flows. For two-phase flows the transition from plug to slug flow agrees with the flow regime maps available in the literature. However, for three phase flows, a progressive displacement towards higher gas superficial velocities is found as the solid concentration is increased. The performance of a modified Lockhart–Martinelli correlation is tested for predicting frictional pressure gradient of three-phase flows with solid particles less dense than the liquid.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Three-dimensional particle size and position measurement by linear complex amplitude Wiener filtering; 35473233

  • Gómez-Climente, M.
  • Lobera Salazar, J.
  • Arroyo de Grandes, M. P.
  • Palero Díaz, V.
Digital in-line holography (DIH) combined with a Wiener filter has been applied to measure particle size and position in the flow inside a capillary model, seeded with magnetic particles (3µm) and with solid opaque particles that simulated red and white cells. The proposed filtering process takes advantage of the linearity implicit in the numerical reconstruction of the object complex amplitude. A modified DIH set-up, with a tilted illumination beam, was used as it presents two main advantages: it solves the twin image issue associated to in-line holography and increases the out-of-plane resolution. Experiments show that the proposed method discriminates particles within a range from 3 to 30µm with a sensitivity of 0.5µm. © 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Large field Digital Image Plane Holography with a double cavity high speed laser

  • Lobera, Julia
  • Arroyo, Mª Pilar
  • Roche, Eva Mª
  • Andrés, Nieves
  • Sancho, Irene
  • Vernet, Antón
  • Pallarés, Jordi
  • Palero, Virginia
The three velocity components in a fluid plane can be measured by applying Digital Image Plane Holography. This technique is limited by the laser coherence length, which reduces its application with high speed lasers that, generally, have a very short coherence length. In addition, the use of a double cavity can also imply a small wavelength difference between the two laser beams. In this work, we present an improved Optical Path Length Enlarging Device that allows the velocity measurement, in a 2D field whose width is four times larger than the laser coherence length. The optical set-up and the procedure for measuring in a larger field (ten times the laser coherence length) were optimized, and the issues derived from the laser spatial and temporal coherence and wavelength changes were analyzed and solved. Digital Image Plane Holography with the Optical Path Length Enlarging Device and Particle Image Velocimetry were applied for measuring the whole velocity field in the central plane of a cylindrical cavity with a rotating lid, for two Reynolds numbers (800 and 2000), showing both of them a very good agreement with the numerical simulations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Advances in interferometric techniques for the analysis of the three-dimensional flow in a lid-driven cylindrical cavity

  • López, Ana M.
  • Lobera, Julia
  • Andrés, Nieves
  • Arroyo, M.Pilar
  • Palero, Virginia
  • Sancho, Irene
  • Vernet, Antón
  • Pallarés, Jordi
Abstract: In this work, a qualitative and quantitative characterization of the three-dimensional flow in a lid-driven cylindrical cavity with different optical techniques is presented. Mach–Zehnder interferometry and photographic techniques have been used for a qualitative description of some flow features. However, the real challenge is to obtain quantitative measurements, as the cavity dimensions and geometry prevent the application of 3D digital techniques for measuring the flow velocity in the whole cavity with enough spatial resolution. Digital in-line holography was applied to the measure of the vortex-breakdown bubble that appears near the cavity bottom at Re = 2000. A 22 × 22 × 80 mm3 volume was recorded, its longest dimension parallel to the camera optical axis. This large volume in a liquid fluid combined with a high particle density forces us to develop new analysis strategies. Holograms have been analyzed using a new method, called Adaptive Cross Correlation with Tracking From Beginning, which includes the use of the reconstructed complex amplitude for particle localization. Particle tracking is based on the three-dimensional cross correlation of three-dimensional interrogation windows. The particle set defined in the first hologram is always used to find the particle position in subsequent holograms. This method provides an accurate 3D velocity map and the vortex-breakdown bubble spatial structure. Experimental and numerical data show a very good agreement. A new criterion for determining the accuracy in the particle position along the optical axis is introduced, achieving a spatial resolution of 0.1 mm. This tracking method can be applied not only to laminar flows but also to turbulent flows.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tilted illumination in-line holographic velocimetry: Improvements in the axial spatial resolution

  • Lobera, Julia
  • Palero, Virginia
  • Roche, Eva
  • Gómez Climente, Marina
  • López Torres, Ana M.
  • Andrés, Nieves
  • Arroyo, M. Pilar
Two are the main limitations of in-line holography: the twin image problem and the poor spatial resolution in the optical axis direction. The twin image problem can be solved with the introduction of an imaging lens and a knife-edge aperture located at its focal plane. In this work, a theoretical analysis of the axial resolution with and without aperture is provided from the perspective of the Optical Diffraction Tomography. Theoretical analysis and controlled experiments with the different recording options, demonstrate that a small tilt of the illumination beam, together with a centered rectangular aperture, is a key parameter as it improves the spatial resolution along the optical axis during the location and tracking of a particle field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Digital holography applied to simultaneously measure the shape and the radial deformation of a blood vessel (ex-vivo)

  • Andrés, Nieves
  • Pinto, Cristina
  • Lobera, Julia
  • López, Ana M.
  • Palero, Virginia
  • Arroyo, M. Pilar
Radial deformation of blood vessels has been measured by combining shape and deformation measurements. The difficulty of measuring both magnitudes simultaneously is related to the different order of magnitude. The veins have diameters up to 20 mm and suffer micrometric deformations due to cardiac movement. Temporal comparison of two-wavelength multiplexed holograms has been used for calculations. The radius value was calculated from the information of the vein shape, obtained by means of double wavelength holography, while the deformation of the vein has been measured with traditional holographic interferometry. In this work, both techniques have been combined using only one recording system. The technique has been tested in a latex tube and in a sheep aorta (ex-vivo). The experiments in both cases have been designed to simulate real patient situations. Differences found between the model and real vessels are presented in the paper.